qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-14 20:56:16 +02:00
Code
4686f1d0fc
openwrt-xburst/target/linux/generic/patches-2.6.37/720-phy_adm6996.patch

27 lines
860 B
Diff
Raw Normal View History

target/linux: add preliminary 2.6.37 kernel support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 18:13:33 +02:00
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-09 18:21:58 +03:00
@@ -98,6 +98,13 @@ config MICREL_PHY
target/linux: add preliminary 2.6.37 kernel support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 18:13:33 +02:00
---help---
Supports the KSZ9021, VSC8201, KS8001 PHYs.
+config ADM6996_PHY
+ tristate "Driver for ADM6996 switches"
[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-09 18:21:58 +03:00
+ select SWCONFIG
target/linux: add preliminary 2.6.37 kernel support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 18:13:33 +02:00
+ ---help---
[PATCH v3] (respin) 802.1Q VLAN support for ADM6996M/ADM6996FC This patch adds 802.1Q VLAN support for the ADM6996M chip. The driver is loaded for both the FC and M model. It will detect which of the two chips is connected. The FC model is initialised, but no further functionality is offered. The PHY driver will always report "100 Mbit/s, link up", for both the M and FC models. This reflects the fact that the link between switch chip and Ethernet MAC is always on[1]. Further documentation can be found in the kernel's Documentation/networking/adm6996.txt Signed-of-By: Peter Lebbing <peter@digitalbrains.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26865 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-09 18:21:58 +03:00
+ Currently supports the ADM6996FC and ADM6996M switches.
+ Support for FC is very limited.
target/linux: add preliminary 2.6.37 kernel support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 18:13:33 +02:00
+
config FIXED_PHY
bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
depends on PHYLIB=y
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
kernel: reorganize 2.6.37 patches git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26692 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-16 21:31:21 +03:00
@@ -14,6 +14,7 @@ obj-$(CONFIG_VITESSE_PHY) += vitesse.o
target/linux: add preliminary 2.6.37 kernel support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23828 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-03 18:13:33 +02:00
obj-$(CONFIG_BROADCOM_PHY) += broadcom.o
obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o
obj-$(CONFIG_ICPLUS_PHY) += icplus.o
+obj-$(CONFIG_ADM6996_PHY) += adm6996.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o
obj-$(CONFIG_FIXED_PHY) += fixed.o
Copy Permalink