openwrt-xburst/target/linux/adm5120-2.6/patches-2.6.22/005-adm5120_usb.patch

Index: linux-2.6.22.1/drivers/usb/core/hub.c
===================================================================
--- linux-2.6.22.1.orig/drivers/usb/core/hub.c
+++ linux-2.6.22.1/drivers/usb/core/hub.c
@@ -464,7 +464,7 @@ void usb_hub_tt_clear_buffer (struct usb
 			: (USB_ENDPOINT_XFER_BULK << 11);
 	if (usb_pipein (pipe))
 		clear->devinfo |= 1 << 15;
-	
+
 	/* tell keventd to clear state for this TT */
 	spin_lock_irqsave (&tt->lock, flags);
 	list_add_tail (&clear->clear_list, &tt->clear_list);
@@ -540,7 +540,7 @@ static int hub_hub_status(struct usb_hub
 			"%s failed (err = %d)\n", __FUNCTION__, ret);
 	else {
 		*status = le16_to_cpu(hub->status->hub.wHubStatus);
-		*change = le16_to_cpu(hub->status->hub.wHubChange); 
+		*change = le16_to_cpu(hub->status->hub.wHubChange);
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
@@ -1424,7 +1424,7 @@ static int hub_port_status(struct usb_hu
 			ret = -EIO;
 	} else {
 		*status = le16_to_cpu(hub->status->port.wPortStatus);
-		*change = le16_to_cpu(hub->status->port.wPortChange); 
+		*change = le16_to_cpu(hub->status->port.wPortChange);
 		ret = 0;
 	}
 	mutex_unlock(&hub->status_mutex);
@@ -2007,7 +2007,7 @@ static inline int remote_wakeup(struct u
  * Between connect detection and reset signaling there must be a delay
  * of 100ms at least for debounce and power-settling.  The corresponding
  * timer shall restart whenever the downstream port detects a disconnect.
- * 
+ *
  * Apparently there are some bluetooth and irda-dongles and a number of
  * low-speed devices for which this debounce period may last over a second.
  * Not covered by the spec - but easy to deal with.
@@ -2142,7 +2142,7 @@ hub_port_init (struct usb_hub *hub, stru
 		goto fail;
 	}
 	oldspeed = udev->speed;
-  
+
 	/* USB 2.0 section 5.5.3 talks about ep0 maxpacket ...
 	 * it's fixed size except for full speed devices.
 	 * For Wireless USB devices, ep0 max packet is always 512 (tho
@@ -2168,7 +2168,7 @@ hub_port_init (struct usb_hub *hub, stru
 	default:
 		goto fail;
 	}
- 
+
 	type = "";
 	switch (udev->speed) {
 	case USB_SPEED_LOW:	speed = "low";	break;
@@ -2194,7 +2194,7 @@ hub_port_init (struct usb_hub *hub, stru
 		udev->tt = &hub->tt;
 		udev->ttport = port1;
 	}
- 
+
 	/* Why interleave GET_DESCRIPTOR and SET_ADDRESS this way?
 	 * Because device hardware and firmware is sometimes buggy in
 	 * this area, and this is how Linux has done it for ages.
@@ -2230,6 +2230,8 @@ hub_port_init (struct usb_hub *hub, stru
 					USB_DT_DEVICE << 8, 0,
 					buf, GET_DESCRIPTOR_BUFSIZE,
 					USB_CTRL_GET_TIMEOUT);
+printk(KERN_CRIT "usb_control_msg: %d %d %d (%d)\n", r, buf->bMaxPacketSize0,
+buf->bDescriptorType, USB_DT_DEVICE);
 				switch (buf->bMaxPacketSize0) {
 				case 8: case 16: case 32: case 64: case 255:
 					if (buf->bDescriptorType ==
@@ -2281,7 +2283,7 @@ hub_port_init (struct usb_hub *hub, stru
 				udev->devnum, retval);
 			goto fail;
 		}
- 
+
 		/* cope with hardware quirkiness:
 		 *  - let SET_ADDRESS settle, some device hardware wants it
 		 *  - read ep0 maxpacket even for high and low speed,
@@ -2318,7 +2320,7 @@ hub_port_init (struct usb_hub *hub, stru
 		udev->ep0.desc.wMaxPacketSize = cpu_to_le16(i);
 		ep0_reinit(udev);
 	}
-  
+
 	retval = usb_get_device_descriptor(udev, USB_DT_DEVICE_SIZE);
 	if (retval < (signed)sizeof(udev->descriptor)) {
 		dev_err(&udev->dev, "device descriptor read/%s, error %d\n",
@@ -2416,7 +2418,7 @@ static void hub_port_connect_change(stru
 	struct device *hub_dev = hub->intfdev;
 	u16 wHubCharacteristics = le16_to_cpu(hub->descriptor->wHubCharacteristics);
 	int status, i;
- 
+
 	dev_dbg (hub_dev,
 		"port %d, status %04x, change %04x, %s\n",
 		port1, portstatus, portchange, portspeed (portstatus));
@@ -2425,7 +2427,7 @@ static void hub_port_connect_change(stru
 		set_port_led(hub, port1, HUB_LED_AUTO);
 		hub->indicator[port1-1] = INDICATOR_AUTO;
 	}
- 
+
 	/* Disconnect any existing devices under this port */
 	if (hdev->children[port1-1])
 		usb_disconnect(&hdev->children[port1-1]);
@@ -2455,7 +2457,7 @@ static void hub_port_connect_change(stru
 		if ((wHubCharacteristics & HUB_CHAR_LPSM) < 2
 				&& !(portstatus & (1 << USB_PORT_FEAT_POWER)))
 			set_port_feature(hdev, port1, USB_PORT_FEAT_POWER);
- 
+
 		if (portstatus & USB_PORT_STAT_ENABLE)
   			goto done;
 		return;
@@ -2535,7 +2537,7 @@ static void hub_port_connect_change(stru
 				goto loop_disable;
 			}
 		}
- 
+
 		/* check for devices running slower than they could */
 		if (le16_to_cpu(udev->descriptor.bcdUSB) >= 0x0200
 				&& udev->speed == USB_SPEED_FULL
@@ -2587,7 +2589,7 @@ loop:
 		if (status == -ENOTCONN)
 			break;
 	}
- 
+
 done:
 	hub_port_disable(hub, port1, 1);
 }
@@ -2720,7 +2722,7 @@ static void hub_events(void)
 				 * EM interference sometimes causes badly
 				 * shielded USB devices to be shutdown by
 				 * the hub, this hack enables them again.
-				 * Works at least with mouse driver. 
+				 * Works at least with mouse driver.
 				 */
 				if (!(portstatus & USB_PORT_STAT_ENABLE)
 				    && !connect_change
@@ -2750,7 +2752,7 @@ static void hub_events(void)
 					"resume on port %d, status %d\n",
 					i, ret);
 			}
-			
+
 			if (portchange & USB_PORT_STAT_C_OVERCURRENT) {
 				dev_err (hub_dev,
 					"over-current change on port %d\n",
@@ -2985,7 +2987,7 @@ int usb_reset_device(struct usb_device *
 
 	if (ret < 0)
 		goto re_enumerate;
- 
+
 	/* Device might have changed firmware (DFU or similar) */
 	if (memcmp(&udev->descriptor, &descriptor, sizeof descriptor)
 			|| config_descriptors_changed (udev)) {
@@ -2993,7 +2995,7 @@ int usb_reset_device(struct usb_device *
 		udev->descriptor = descriptor;	/* for disconnect() calls */
 		goto re_enumerate;
   	}
-  
+
 	if (!udev->actconfig)
 		goto done;
 
@@ -3031,7 +3033,7 @@ int usb_reset_device(struct usb_device *
 
 done:
 	return 0;
- 
+
 re_enumerate:
 	hub_port_logical_disconnect(parent_hub, port1);
 	return -ENODEV;
Index: linux-2.6.22.1/drivers/usb/host/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/usb/host/Kconfig
+++ linux-2.6.22.1/drivers/usb/host/Kconfig
@@ -237,3 +237,6 @@ config USB_SL811_CS
 	  To compile this driver as a module, choose M here: the
 	  module will be called "sl811_cs".
 
+config USB_ADM5120_HCD
+	tristate "ADM5120 HCD support"
+	depends on USB && MIPS_ADM5120
Index: linux-2.6.22.1/drivers/usb/host/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/usb/host/Makefile
+++ linux-2.6.22.1/drivers/usb/host/Makefile
@@ -8,6 +8,7 @@ endif
 
 obj-$(CONFIG_PCI)		+= pci-quirks.o
 
+obj-$(CONFIG_USB_ADM5120_HCD)	+= adm5120-hcd.o
 obj-$(CONFIG_USB_EHCI_HCD)	+= ehci-hcd.o
 obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
 obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
Index: linux-2.6.22.1/drivers/usb/Kconfig
===================================================================
--- linux-2.6.22.1.orig/drivers/usb/Kconfig
+++ linux-2.6.22.1/drivers/usb/Kconfig
@@ -88,8 +88,6 @@ source "drivers/usb/storage/Kconfig"
 
 source "drivers/usb/image/Kconfig"
 
-source "drivers/usb/mon/Kconfig"
-
 comment "USB port drivers"
 	depends on USB
 
Index: linux-2.6.22.1/drivers/usb/Makefile
===================================================================
--- linux-2.6.22.1.orig/drivers/usb/Makefile
+++ linux-2.6.22.1/drivers/usb/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_USB_UHCI_HCD)	+= host/
 obj-$(CONFIG_USB_SL811_HCD)	+= host/
 obj-$(CONFIG_USB_U132_HCD)	+= host/
 obj-$(CONFIG_USB_OHCI_AT91)	+= host/
+obj-$(CONFIG_USB_ADM5120_HCD)  	+= host/
 
 obj-$(CONFIG_USB_ACM)		+= class/
 obj-$(CONFIG_USB_PRINTER)	+= class/