openwrt-xburst/target/linux/lantiq/base-files/etc/uci-defaults/network

#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#

set_interface_loopback() {
	uci batch <<EOF
set network.loopback='interface'
set network.loopback.ifname='lo'
set network.loopback.proto='static'
set network.loopback.ipaddr='127.0.0.1'
set network.loopback.netmask='255.0.0.0'
EOF
}

set_interface_raw() {
	local cfg=$1
	local ifname=$2

	uci batch <<EOF
set network.$cfg='interface'
set network.$cfg.ifname='$ifname'
set network.$cfg.proto='none'
EOF
}

set_interface_lan() {
	local ifname=$1

	uci batch <<EOF
set network.lan='interface'
set network.lan.ifname='$ifname'
set network.lan.type='bridge'
set network.lan.proto='static'
set network.lan.ipaddr='192.168.1.1'
set network.lan.netmask='255.255.255.0'
EOF
}

set_interface_wan() {
	local ifname=$1

	uci batch <<EOF
set network.wan='interface'
set network.wan.ifname='$ifname'
set network.wan.proto='dhcp'
EOF
}

set_atm_wan() {
	local vpi=$1
	local vci=$2
	local encaps=$3
	local payload=$4
	uci batch <<EOF
set network.atm='atm-bridge'
set network.atm.unit='0'
set network.atm.vpi='$vpi'
set network.atm.vci='$vci'
set network.atm.encaps='$encaps'
set network.atm.payload='$payload'
set network.atm.fwannex='$annex'
set network.atm.annex='$annex'
set network.wan='interface'
set network.wan.ifname='nas0'
set network.wan.proto='pppoe'
set network.wan.username='foo'
set network.wan.password='bar'
EOF
}

set_adsl() {
	local fwannex=$1
	local annex=$2
	uci batch <<EOF
set network.adsl='adsl-device'
set network.adsl.fwannex='$fwannex'
set network.adsl.annex='$annex'
EOF
}

set_interfaces_lan_wan() {
	local lan_ifname=$1
	local wan_ifname=$2

	set_interface_lan "$lan_ifname"
	set_interface_wan "$wan_ifname"
}

add_switch() {
	local name=$1
	local reset=$2
	local enable=$3
	uci batch <<EOF
add network switch
set network.@switch[-1].name='$name'
set network.@switch[-1].reset='$reset'
set network.@switch[-1].enable_vlan='$enable'
EOF
}

add_switch_vlan() {
	local device=$1
	local vlan=$2
	local ports=$3
	uci batch <<EOF
add network switch_vlan
set network.@switch_vlan[-1].device='$device'
set network.@switch_vlan[-1].vlan='$vlan'
set network.@switch_vlan[-1].ports='$ports'
EOF
}

[ -e /etc/config/network ] && exit 0

. /lib/lantiq.sh

touch /etc/config/network

set_interface_loopback
set_interface_lan 'eth0'


vpi=1
vci=32
encaps="llc"
payload="bridged"
fwannex=$(lantiq_dsl_fwannex)
annex="$fwannex"

board=$(lantiq_board_name)
case "$board" in
GIGASX76X)
	set_interface_lan "eth0.1"
	add_switch "eth0" "1" "1"
	add_switch_vlan "eth0" "1" "1 2 3 4 5t"
	;;

*)
	# custom foo goes here
	true
	;;
esac

dsl=$(lantiq_soc_has_adsl)
[ -z "$dsl" ] || set_atm_wan "$vpi" "vci" "$encaps" "$payload" "$annex"
[ -z "$fwannex" ] || set_adsl "$fwannex" "$annex"

uci commit network

exit 0