openwrt-xburst/target/linux/xburst/files-2.6.27/include/asm-mips/mach-jz4750d/board-cetus.h

/*
 *  linux/include/asm-mips/mach-jz4750d/board-cetus.h
 *
 *  JZ4750D-based CETUS board ver 1.x definition.
 *
 *  Copyright (C) 2008 Ingenic Semiconductor Inc.
 *
 *  Author: <cwjia@ingenic.cn>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

#ifndef __ASM_JZ4750D_CETUS_H__
#define __ASM_JZ4750D_CETUS_H__

/*====================================================================== 
 * Frequencies of on-board oscillators
 */
#define JZ_EXTAL		24000000
#define JZ_EXTAL2		32768     /* RTC extal freq: 32.768 KHz */
//#define CFG_DIV                 1         /* hclk=pclk=mclk=CFG_EXTAL/CFG_DIV, just for FPGA board */

/*====================================================================== 
 * GPIO
 */
#define GPIO_DISP_OFF_N		(32*4+18) /* SDATO */
#define GPIO_SD0_VCC_EN_N	(32*4+0) /* CIM_D0 */
#define GPIO_SD0_CD_N		(32*4+1) /* CIM_D1 */
#define GPIO_SD0_WP		(32*4+2) /* CIM_D2 */
#define GPIO_SD1_VCC_EN_N	(32*4+3) /* CIM_D3 */
#define GPIO_SD1_CD_N		(32*4+4) /* CIM_D4 */
#define GPIO_USB_DETE		(32*4+6) /* CIM_D6 */
#define GPIO_DC_DETE_N		(32*4+8) /* CIM_MCLK */
#define GPIO_CHARG_STAT_N	(32*4+10) /* CHARG_DET_N, CIM_VSYNC */
#define GPIO_LCD_VCC_EN_N	(32*4+19) /* SDATI */
#define GPIO_LCD_PWM   		(32*4+22) /* GPE22 PWM2 */ 

#define GPIO_UDC_HOTPLUG	GPIO_USB_DETE
#define GPIO_AMPEN_N		(32*4+5)

/*====================================================================
 * GPIO KEYS and ADKEYS
 */
#define GPIO_HOME		(32*5+12) // SW4-GPF12 SSI_DR
#define GPIO_MENU		(32*2+31) // SW2-GPC31 boot_sel1
#define GPIO_BACK		(32*5+11) // SW3-GPF11 SSI_DT
#define GPIO_CALL		(32*5+10) // SW5-GPF10 SSI_CLK
#define GPIO_ENDCALL		(32*4+7)  // SW6-GPE7  CIM_D7
#define GPIO_SW10		(32*4+25) // SW10-GPE25 UART1_TXD
#define GPIO_ADKEY_INT		(32*4+11) // KEY_INT-GPE11  CIM_HSYNC

/*====================================================================
 *  ADKEYS LEVEL
 */

#define DPAD_LEFT_LEVEL		869	//0.7V, 225=0.18105/3.3*4096
#define DPAD_DOWN_LEVEL		1986	//1.6V
#define DPAD_UP_LEVEL		2482	//2.0V
#define DPAD_CENTER_LEVEL	1489	//1.2V
#define DPAD_RIGHT_LEVEL	186	//0.15V

/*====================================================================== 
 * Analog input for VBAT is the battery voltage divided by CFG_PBAT_DIV.
 */
#define CFG_PBAT_DIV            1

/*====================================================================== 
 * MMC/SD
 */

#define MSC0_WP_PIN		GPIO_SD0_WP
#define MSC0_HOTPLUG_PIN	GPIO_SD0_CD_N
#define MSC0_HOTPLUG_IRQ	(IRQ_GPIO_0 + GPIO_SD0_CD_N)

#define MSC1_WP_PIN		GPIO_SD1_WP
#define MSC1_HOTPLUG_PIN	GPIO_SD1_CD_N
#define MSC1_HOTPLUG_IRQ	(IRQ_GPIO_0 + GPIO_SD1_CD_N)

/*====================================================================== 
 * LCD backlight
 */
#define LCD_PWM_CHN 2    /* pwm channel */
#define LCD_PWM_FULL 256
/* 100 level: 0,1,...,100 */
#define __lcd_set_backlight_level(n)                     \
do {					\
	__gpio_as_output(GPIO_LCD_PWM);	\
	__gpio_set_pin(GPIO_LCD_PWM);	\
} while (0)

#define __lcd_close_backlight()		\
do {					\
	__gpio_as_output(GPIO_LCD_PWM);	\
	__gpio_clear_pin(GPIO_LCD_PWM);	\
} while (0)

/*
 * The GPIO interrupt pin is low voltage or fall edge acitve
 */
#define ACTIVE_LOW_HOME		1
#define ACTIVE_LOW_MENU		1
#define ACTIVE_LOW_BACK		1
#define ACTIVE_LOW_CALL		1
#define ACTIVE_LOW_ENDCALL	1
#define ACTIVE_LOW_SW10		1
#define ACTIVE_LOW_ADKEY	1
#define ACTIVE_LOW_MSC0_CD	1 /* work when GPIO_SD0_CD_N = 0 */
#define ACTIVE_LOW_MSC1_CD	1 /* work when GPIO_SD1_CD_N = 0 */

#endif /* __ASM_JZ4750d_CETUS_H__ */