1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-05 05:49:42 +02:00
openwrt-xburst/package/linux/kernel-source/include/bcmenet47xx.h

230 lines
7.3 KiB
C
Raw Normal View History

/*
* Hardware-specific definitions for
* Broadcom BCM47XX 10/100 Mbps Ethernet cores.
*
* Copyright 2004, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
* $Id$
*/
#ifndef _bcmenet_47xx_h_
#define _bcmenet_47xx_h_
#include <bcmdevs.h>
#include <hnddma.h>
#define BCMENET_NFILTERS 64 /* # ethernet address filter entries */
#define BCMENET_MCHASHBASE 0x200 /* multicast hash filter base address */
#define BCMENET_MCHASHSIZE 256 /* multicast hash filter size in bytes */
#define BCMENET_MAX_DMA 4096 /* chip has 12 bits of DMA addressing */
/* power management event wakeup pattern constants */
#define BCMENET_NPMP 4 /* chip supports 4 wakeup patterns */
#define BCMENET_PMPBASE 0x400 /* wakeup pattern base address */
#define BCMENET_PMPSIZE 0x80 /* 128bytes each pattern */
#define BCMENET_PMMBASE 0x600 /* wakeup mask base address */
#define BCMENET_PMMSIZE 0x10 /* 128bits each mask */
/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
#define _PADLINE(line) pad ## line
#define _XSTR(line) _PADLINE(line)
#define PAD _XSTR(__LINE__)
#endif /* PAD */
/* sometimes you just need the enet mib definitions */
#include <bcmenetmib.h>
/*
* Host Interface Registers
*/
typedef volatile struct _bcmenettregs {
/* Device and Power Control */
uint32 devcontrol;
uint32 PAD[2];
uint32 biststatus;
uint32 wakeuplength;
uint32 PAD[3];
/* Interrupt Control */
uint32 intstatus;
uint32 intmask;
uint32 gptimer;
uint32 PAD[23];
/* Ethernet MAC Address Filtering Control */
uint32 PAD[2];
uint32 enetftaddr;
uint32 enetftdata;
uint32 PAD[2];
/* Ethernet MAC Control */
uint32 emactxmaxburstlen;
uint32 emacrxmaxburstlen;
uint32 emaccontrol;
uint32 emacflowcontrol;
uint32 PAD[20];
/* DMA Lazy Interrupt Control */
uint32 intrecvlazy;
uint32 PAD[63];
/* DMA engine */
dmaregs_t dmaregs;
dmafifo_t dmafifo;
uint32 PAD[116];
/* EMAC Registers */
uint32 rxconfig;
uint32 rxmaxlength;
uint32 txmaxlength;
uint32 PAD;
uint32 mdiocontrol;
uint32 mdiodata;
uint32 emacintmask;
uint32 emacintstatus;
uint32 camdatalo;
uint32 camdatahi;
uint32 camcontrol;
uint32 enetcontrol;
uint32 txcontrol;
uint32 txwatermark;
uint32 mibcontrol;
uint32 PAD[49];
/* EMAC MIB counters */
bcmenetmib_t mib;
uint32 PAD[585];
/* Sonics SiliconBackplane config registers */
sbconfig_t sbconfig;
} bcmenetregs_t;
/* device control */
#define DC_PM ((uint32)1 << 7) /* pattern filtering enable */
#define DC_IP ((uint32)1 << 10) /* internal ephy present (rev >= 1) */
#define DC_ER ((uint32)1 << 15) /* ephy reset */
#define DC_MP ((uint32)1 << 16) /* mii phy mode enable */
#define DC_CO ((uint32)1 << 17) /* mii phy mode: enable clocks */
#define DC_PA_MASK 0x7c0000 /* mii phy mode: mdc/mdio phy address */
#define DC_PA_SHIFT 18
/* wakeup length */
#define WL_P0_MASK 0x7f /* pattern 0 */
#define WL_D0 ((uint32)1 << 7)
#define WL_P1_MASK 0x7f00 /* pattern 1 */
#define WL_P1_SHIFT 8
#define WL_D1 ((uint32)1 << 15)
#define WL_P2_MASK 0x7f0000 /* pattern 2 */
#define WL_P2_SHIFT 16
#define WL_D2 ((uint32)1 << 23)
#define WL_P3_MASK 0x7f000000 /* pattern 3 */
#define WL_P3_SHIFT 24
#define WL_D3 ((uint32)1 << 31)
/* intstatus and intmask */
#define I_PME ((uint32)1 << 6) /* power management event */
#define I_TO ((uint32)1 << 7) /* general purpose timeout */
#define I_PC ((uint32)1 << 10) /* descriptor error */
#define I_PD ((uint32)1 << 11) /* data error */
#define I_DE ((uint32)1 << 12) /* descriptor protocol error */
#define I_RU ((uint32)1 << 13) /* receive descriptor underflow */
#define I_RO ((uint32)1 << 14) /* receive fifo overflow */
#define I_XU ((uint32)1 << 15) /* transmit fifo underflow */
#define I_RI ((uint32)1 << 16) /* receive interrupt */
#define I_XI ((uint32)1 << 24) /* transmit interrupt */
#define I_EM ((uint32)1 << 26) /* emac interrupt */
#define I_MW ((uint32)1 << 27) /* mii write */
#define I_MR ((uint32)1 << 28) /* mii read */
/* emaccontrol */
#define EMC_CG ((uint32)1 << 0) /* crc32 generation enable */
#define EMC_EP ((uint32)1 << 2) /* onchip ephy: powerdown (rev >= 1) */
#define EMC_ED ((uint32)1 << 3) /* onchip ephy: energy detected (rev >= 1) */
#define EMC_LC_MASK 0xe0 /* onchip ephy: led control (rev >= 1) */
#define EMC_LC_SHIFT 5
/* emacflowcontrol */
#define EMF_RFH_MASK 0xff /* rx fifo hi water mark */
#define EMF_PG ((uint32)1 << 15) /* enable pause frame generation */
/* interrupt receive lazy */
#define IRL_TO_MASK 0x00ffffff /* timeout */
#define IRL_FC_MASK 0xff000000 /* frame count */
#define IRL_FC_SHIFT 24 /* frame count */
/* emac receive config */
#define ERC_DB ((uint32)1 << 0) /* disable broadcast */
#define ERC_AM ((uint32)1 << 1) /* accept all multicast */
#define ERC_RDT ((uint32)1 << 2) /* receive disable while transmitting */
#define ERC_PE ((uint32)1 << 3) /* promiscuous enable */
#define ERC_LE ((uint32)1 << 4) /* loopback enable */
#define ERC_FE ((uint32)1 << 5) /* enable flow control */
#define ERC_UF ((uint32)1 << 6) /* accept unicast flow control frame */
#define ERC_RF ((uint32)1 << 7) /* reject filter */
/* emac mdio control */
#define MC_MF_MASK 0x7f /* mdc frequency */
#define MC_PE ((uint32)1 << 7) /* mii preamble enable */
/* emac mdio data */
#define MD_DATA_MASK 0xffff /* r/w data */
#define MD_TA_MASK 0x30000 /* turnaround value */
#define MD_TA_SHIFT 16
#define MD_TA_VALID (2 << MD_TA_SHIFT) /* valid ta */
#define MD_RA_MASK 0x7c0000 /* register address */
#define MD_RA_SHIFT 18
#define MD_PMD_MASK 0xf800000 /* physical media device */
#define MD_PMD_SHIFT 23
#define MD_OP_MASK 0x30000000 /* opcode */
#define MD_OP_SHIFT 28
#define MD_OP_WRITE (1 << MD_OP_SHIFT) /* write op */
#define MD_OP_READ (2 << MD_OP_SHIFT) /* read op */
#define MD_SB_MASK 0xc0000000 /* start bits */
#define MD_SB_SHIFT 30
#define MD_SB_START (0x1 << MD_SB_SHIFT) /* start of frame */
/* emac intstatus and intmask */
#define EI_MII ((uint32)1 << 0) /* mii mdio interrupt */
#define EI_MIB ((uint32)1 << 1) /* mib interrupt */
#define EI_FLOW ((uint32)1 << 2) /* flow control interrupt */
/* emac cam data high */
#define CD_V ((uint32)1 << 16) /* valid bit */
/* emac cam control */
#define CC_CE ((uint32)1 << 0) /* cam enable */
#define CC_MS ((uint32)1 << 1) /* mask select */
#define CC_RD ((uint32)1 << 2) /* read */
#define CC_WR ((uint32)1 << 3) /* write */
#define CC_INDEX_MASK 0x3f0000 /* index */
#define CC_INDEX_SHIFT 16
#define CC_CB ((uint32)1 << 31) /* cam busy */
/* emac ethernet control */
#define EC_EE ((uint32)1 << 0) /* emac enable */
#define EC_ED ((uint32)1 << 1) /* emac disable */
#define EC_ES ((uint32)1 << 2) /* emac soft reset */
#define EC_EP ((uint32)1 << 3) /* external phy select */
/* emac transmit control */
#define EXC_FD ((uint32)1 << 0) /* full duplex */
#define EXC_FM ((uint32)1 << 1) /* flowmode */
#define EXC_SB ((uint32)1 << 2) /* single backoff enable */
#define EXC_SS ((uint32)1 << 3) /* small slottime */
/* emac mib control */
#define EMC_RZ ((uint32)1 << 0) /* autoclear on read */
/* sometimes you just need the enet rxheader definitions */
#include <bcmenetrxh.h>
#endif /* _bcmenet_47xx_h_ */