qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-18 03:24:04 +02:00
Code
50c442dbb8
openwrt-xburst/package/network/utils/comgt/Makefile

68 lines
2.0 KiB
Makefile
Raw Normal View History

move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
#
[package] comgt: handle service mode for Huawai modems (#12039) It seems that the comgt package does not handle the Huawei 3G USB dongle E176 correctly (and probably other Huawei dongles too). My dongle appears as ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem and 3G/UMTS connections work well. However, no connection is established if only 2G/GPRS is available: the pppd chat script fails with NO CARRIER although the dongle is registered to the network (via 2G). As outlined in this wiki or this blog, Huawei chips use the AT^SYSCFG command to set 2G or 3G mode, which is not implemented in comgt at the moment. Thus I wrote a patch for /lib/network/3g.sh which adds support for the "service" option in the network configuration with Huawei dongles. By default (if no "service" option is specified) also 2G is used when 3G is unavailable. The Huawei dongle is detected analogously to other chips (the output of gcom -d /dev/ttyUSB0 -s /etc/gcom/getcardinfo.gcom is scanned for huawei). Some further information: The AT^SYSCFG command seems to be respected only once after the dongle is attached (or after the host is powered up). Resetting the dongle seems to render the serial port unusable in some cases. However, the patch sets a useful mode by default which should cover most use cases (3G preferred, but 2G allowed) and if 3G-only or 2G-only mode is required the device can be power cycled. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33212 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-19 18:59:24 +03:00
# Copyright (C) 2006-2012 OpenWrt.org
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=comgt
Upgrade comgt to 0.32 (#1347) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-02-19 13:17:13 +02:00
PKG_VERSION:=0.32
[package] comgt: perform case insensitive match when probing for Huawei devices (#12039) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33507 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-09-22 17:55:17 +03:00
PKG_RELEASE:=21
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
Upgrade comgt to 0.32 (#1347) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-02-19 13:17:13 +02:00
PKG_SOURCE:=$(PKG_NAME).$(PKG_VERSION).tgz
PKG_SOURCE_URL:=@SF/comgt
PKG_MD5SUM:=db2452680c3d953631299e331daf49ef
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
add myself as a maintainer for a few more packages git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33693 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-10 15:49:37 +03:00
PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
Upgrade comgt to 0.32 (#1347) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6323 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-02-19 13:17:13 +02:00
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME).$(PKG_VERSION)
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
include $(INCLUDE_DIR)/package.mk
define Package/comgt
SECTION:=utils
CATEGORY:=Utilities
TITLE:=Option/Vodafone 3G/GPRS control tool
DEPENDS:=+chat
[package] cleanup Makefiles (#7212) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21107 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-23 14:27:29 +03:00
URL:=http://www.pharscape.org/comgt.html
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
endef
move package description to a separate definition, remove it when DESCRIPTION=TITLE git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8659 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-09-07 11:34:51 +03:00
define Package/comgt/description
comgt is a scripting language interpreter useful for establishing
communications on serial lines and through PCMCIA modems as well as GPRS
and 3G datacards.
endef
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
define Build/Compile
$(MAKE) -C $(PKG_BUILD_DIR) \
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS)" \
comgt: clean up patch, rename gcom binary to comgt, but add a compatibility symlink git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 11:47:19 +03:00
LDFLAGS="" \
comgt
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
endef
comgt: clean up patch, rename gcom binary to comgt, but add a compatibility symlink git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 11:47:19 +03:00
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
define Package/comgt/install
replace lots of manual install commands with INSTALL_* variables git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-23 02:29:07 +02:00
$(INSTALL_DIR) $(1)/usr/bin
comgt: clean up patch, rename gcom binary to comgt, but add a compatibility symlink git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27699 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-07-20 11:47:19 +03:00
$(INSTALL_BIN) $(PKG_BUILD_DIR)/comgt $(1)/usr/bin/
ln -s comgt $(1)/usr/bin/gcom
replace lots of manual install commands with INSTALL_* variables git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-23 02:29:07 +02:00
$(INSTALL_DIR) $(1)/etc/chatscripts
$(INSTALL_DATA) ./files/3g.chat $(1)/etc/chatscripts/3g.chat
Add CDMA/EVDO support to comgt package This patch adds a chat script and makes some modifications to /lib/network/3g.sh to enable seamless use of CDMA/EVDO modems in addition to the existing GPRS/UMTS support. Modifications to 3g.sh are: - Added 'chat' variable to point at the appropriate script - Added 'evdo' and 'cdma' as acceptable 'service' values, and skip the whole gcom initialization bit - Changed pppd connection speed from 460800 to more widely supported 115200; in my experience, this is not your actual connection speed, but at what speed pppd sends setup commands to the interface. This kinda eliminates the need for /etc/ppp/3g.connect - I think I've replaced that functionality, but in a slightly more standardized method, using the 'connect' variable understood by PPP. Signed-off-by: RB<aoz.syn@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10347 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-02-02 03:21:31 +02:00
$(INSTALL_DATA) ./files/evdo.chat $(1)/etc/chatscripts/evdo.chat
replace lots of manual install commands with INSTALL_* variables git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5624 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-23 02:29:07 +02:00
$(INSTALL_DIR) $(1)/etc/gcom
$(INSTALL_DATA) ./files/setpin.gcom $(1)/etc/gcom/setpin.gcom
$(INSTALL_DATA) ./files/setmode.gcom $(1)/etc/gcom/setmode.gcom
$(INSTALL_DATA) ./files/getcardinfo.gcom $(1)/etc/gcom/getcardinfo.gcom
$(INSTALL_DATA) ./files/getstrength.gcom $(1)/etc/gcom/getstrength.gcom
comgt: delay 3g bringup for sierra wireless cards until the card has locked on to the carrier, this helps with avoiding firmware hangs (thx, chris) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28636 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 23:29:10 +03:00
$(INSTALL_DATA) ./files/getcarrier.gcom $(1)/etc/gcom/getcarrier.gcom
comgt: Add scripts to comgt to retrieve the IMSI and CNUM to identify the SIM card. Signed-off-by: Daniel Golle <dgolle@allnet.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29365 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-30 16:16:44 +02:00
$(INSTALL_DATA) ./files/getcnum.gcom $(1)/etc/gcom/getcnum.gcom
$(INSTALL_DATA) ./files/getimsi.gcom $(1)/etc/gcom/getimsi.gcom
comgt: port 3g.sh to netifd git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28634 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-10-27 23:29:00 +03:00
$(INSTALL_DIR) $(1)/etc/hotplug.d/tty
comgt: remove old network scripts git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31982 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-29 15:59:11 +03:00
$(INSTALL_DATA) ./files/3g.usb $(1)/etc/hotplug.d/tty/30-3g
$(INSTALL_DIR) $(1)/lib/netifd/proto
$(INSTALL_BIN) ./files/3g.sh $(1)/lib/netifd/proto/3g.sh
move comgt to trunk and add network scripts for umts compatible with the wrt54g3g git-svn-id: svn://svn.openwrt.org/openwrt/trunk@5433 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-11-04 02:21:54 +02:00
endef
$(eval $(call BuildPackage,comgt))
Copy Permalink