openwrt-xburst/target/linux/pxa/patches-2.6.21/036-270-usb-gadget-udc.patch

--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -129,6 +129,28 @@ config USB_PXA2XX_SMALL
 	default y if USB_ETH
 	default y if USB_G_SERIAL
 
+config USB_GADGET_PXA27X
+        boolean "PXA 27x"
+        depends on ARCH_PXA && PXA27x
+        help
+           Intel's PXA 27x series XScale ARM-5TE processors include
+           an integrated full speed USB 1.1 device controller.  
+
+           Say "y" to link the driver statically, or "m" to build a
+           dynamically linked module called "pxa27x_udc" and force all
+           gadget drivers to also be dynamically linked.
+
+config USB_PXA27X
+        tristate
+        depends on USB_GADGET_PXA27X
+        default USB_GADGET
+        select USB_GADGET_SELECTED
+
+config USB_PXA27X_DMA
+        bool # "Use DMA support"
+        depends on USB_GADGET_PXA27X
+        default n
+
 config USB_GADGET_GOKU
 	boolean "Toshiba TC86C001 'Goku-S'"
 	depends on PCI
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_USB_PXA2XX)	+= pxa2xx_udc.o
 obj-$(CONFIG_USB_GOKU)		+= goku_udc.o
 obj-$(CONFIG_USB_OMAP)		+= omap_udc.o
 obj-$(CONFIG_USB_LH7A40X)	+= lh7a40x_udc.o
+obj-$(CONFIG_USB_PXA27X)	+= pxa27x_udc.o
 obj-$(CONFIG_USB_AT91)		+= at91_udc.o
 obj-$(CONFIG_USB_GADGET_GUMSTIX)	+= gumstix_gadget.o
 
--- /dev/null
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -0,0 +1,2352 @@
+/*
+ * linux/drivers/usb/gadget/pxa27x_udc.c
+ * Intel PXA2xx and IXP4xx on-chip full speed USB device controllers
+ *
+ * Copyright (C) 2002 Intrinsyc, Inc. (Frank Becker)
+ * Copyright (C) 2003 Robert Schwebel, Pengutronix
+ * Copyright (C) 2003 Benedikt Spranger, Pengutronix
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2003 Joshua Wise
+ * Copyright (C) 2004 Intel Corporation
+ * Copyright (C) 2005 SDG Systems, LLC  (Aric Blumer)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#undef	DEBUG
+ // #define DEBUG 1
+ //#define	VERBOSE	DBG_VERBOSE
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/types.h>
+#include <linux/version.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/proc_fs.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/irq.h>
+
+#include <asm/byteorder.h>
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/mach-types.h>
+#include <asm/unaligned.h>
+#include <asm/hardware.h>
+#include <asm/mach/irq.h>
+#include <asm/arch/pxa-regs.h>
+
+#include <linux/usb/ch9.h>
+#include <linux/usb_gadget.h>
+
+#include <asm/arch/udc.h>
+
+
+/*
+ * This driver handles the USB Device Controller (UDC) in Intel's PXA 27777777x
+ * series processors.
+ * Such controller drivers work with a gadget driver.  The gadget driver
+ * returns descriptors, implements configuration and data protocols used
+ * by the host to interact with this device, and allocates endpoints to
+ * the different protocol interfaces.  The controller driver virtualizes
+ * usb hardware so that the gadget drivers will be more portable.
+ *
+ * This UDC hardware wants to implement a bit too much USB protocol, so
+ * it constrains the sorts of USB configuration change events that work.
+ * The errata for these chips are misleading; some "fixed" bugs from
+ * pxa250 a0/a1 b0/b1/b2 sure act like they're still there.
+ */
+
+#define	DRIVER_VERSION	"21-Jul-2005"
+#define	DRIVER_DESC	"PXA 27x USB Device Controller driver"
+
+
+static const char driver_name [] = "pxa27x_udc";
+
+static const char ep0name [] = "ep0";
+
+
+#define	USE_DMA
+//#define	DISABLE_TEST_MODE
+
+#ifdef CONFIG_PROC_FS
+#define	UDC_PROC_FILE
+#endif
+
+#include "pxa27x_udc.h"
+
+#if 0
+#ifdef CONFIG_EMBEDDED
+/* few strings, and little code to use them */
+#undef	DEBUG
+#undef	UDC_PROC_FILE
+#endif
+#endif
+
+#ifdef	USE_DMA
+static int use_dma = 1;
+module_param(use_dma, bool, 0);
+MODULE_PARM_DESC (use_dma, "true to use dma");
+
+static void dma_nodesc_handler (int dmach, void *_ep);
+static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req);
+
+#define	DMASTR " (dma support)"
+
+#else	/* !USE_DMA */
+#define	DMASTR " (pio only)"
+#endif
+
+#ifdef	CONFIG_USB_PXA27X_SMALL
+#define SIZE_STR	" (small)"
+#else
+#define SIZE_STR	""
+#endif
+
+#ifdef DISABLE_TEST_MODE
+/* (mode == 0) == no undocumented chip tweaks
+ * (mode & 1)  == double buffer bulk IN
+ * (mode & 2)  == double buffer bulk OUT
+ * ... so mode = 3 (or 7, 15, etc) does it for both
+ */
+static ushort fifo_mode = 0;
+module_param(fifo_mode, ushort, 0);
+MODULE_PARM_DESC (fifo_mode, "pxa27x udc fifo mode");
+#endif
+
+#define UDCISR0_IR0	 0x3
+#define UDCISR_INT_MASK	 (UDC_INT_FIFOERROR | UDC_INT_PACKETCMP)
+#define UDCICR_INT_MASK	 UDCISR_INT_MASK
+
+#define UDCCSR_MASK	(UDCCSR_FST | UDCCSR_DME)
+/* ---------------------------------------------------------------------------
+ * 	endpoint related parts of the api to the usb controller hardware,
+ *	used by gadget driver; and the inner talker-to-hardware core.
+ * ---------------------------------------------------------------------------
+ */
+
+static void pxa27x_ep_fifo_flush (struct usb_ep *ep);
+static void nuke (struct pxa27x_ep *, int status);
+
+static void pio_irq_enable(int ep_num)
+{
+        if (ep_num < 16)
+                UDCICR0 |= 3 << (ep_num * 2);
+        else {
+                ep_num -= 16;
+                UDCICR1 |= 3 << (ep_num * 2);
+	}
+}
+
+static void pio_irq_disable(int ep_num)
+{
+        ep_num &= 0xf;
+        if (ep_num < 16)
+                UDCICR0 &= ~(3 << (ep_num * 2));
+        else {
+                ep_num -= 16;
+                UDCICR1 &= ~(3 << (ep_num * 2));
+        }
+}
+
+/* The UDCCR reg contains mask and interrupt status bits,
+ * so using '|=' isn't safe as it may ack an interrupt.
+ */
+#define UDCCR_MASK_BITS         (UDCCR_OEN | UDCCR_UDE)
+
+static inline void udc_set_mask_UDCCR(int mask)
+{
+	UDCCR = (UDCCR & UDCCR_MASK_BITS) | (mask & UDCCR_MASK_BITS);
+}
+
+static inline void udc_clear_mask_UDCCR(int mask)
+{
+	UDCCR = (UDCCR & UDCCR_MASK_BITS) & ~(mask & UDCCR_MASK_BITS);
+}
+
+static inline void udc_ack_int_UDCCR(int mask)
+{
+	/* udccr contains the bits we dont want to change */
+	__u32 udccr = UDCCR & UDCCR_MASK_BITS;
+
+	UDCCR = udccr | (mask & ~UDCCR_MASK_BITS);
+}
+
+/*
+ * endpoint enable/disable
+ *
+ * we need to verify the descriptors used to enable endpoints.  since pxa27x
+ * endpoint configurations are fixed, and are pretty much always enabled,
+ * there's not a lot to manage here.
+ *
+ * because pxa27x can't selectively initialize bulk (or interrupt) endpoints,
+ * (resetting endpoint halt and toggle), SET_INTERFACE is unusable except
+ * for a single interface (with only the default altsetting) and for gadget
+ * drivers that don't halt endpoints (not reset by set_interface).  that also
+ * means that if you use ISO, you must violate the USB spec rule that all
+ * iso endpoints must be in non-default altsettings.
+ */
+static int pxa27x_ep_enable (struct usb_ep *_ep,
+		const struct usb_endpoint_descriptor *desc)
+{
+	struct pxa27x_ep        *ep;
+	struct pxa27x_udc       *dev;
+
+	ep = container_of (_ep, struct pxa27x_ep, ep);
+	if (!_ep || !desc || _ep->name == ep0name
+			|| desc->bDescriptorType != USB_DT_ENDPOINT
+			|| ep->fifo_size < le16_to_cpu(desc->wMaxPacketSize)) {
+		DMSG("%s, bad ep or descriptor\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	/* xfer types must match, except that interrupt ~= bulk */
+	if( ep->ep_type != USB_ENDPOINT_XFER_BULK
+			&& desc->bmAttributes != USB_ENDPOINT_XFER_INT) {
+		DMSG("%s, %s type mismatch\n", __FUNCTION__, _ep->name);
+		return -EINVAL;
+	}
+
+	/* hardware _could_ do smaller, but driver doesn't */
+	if ((desc->bmAttributes == USB_ENDPOINT_XFER_BULK
+				&& le16_to_cpu (desc->wMaxPacketSize)
+						!= BULK_FIFO_SIZE)
+			|| !desc->wMaxPacketSize) {
+		DMSG("%s, bad %s maxpacket\n", __FUNCTION__, _ep->name);
+		return -ERANGE;
+	}
+
+	dev = ep->dev;
+	if (!dev->driver || dev->gadget.speed == USB_SPEED_UNKNOWN) {
+		DMSG("%s, bogus device state\n", __FUNCTION__);
+		return -ESHUTDOWN;
+	}
+
+	ep->desc = desc;
+	ep->dma = -1;
+	ep->stopped = 0;
+	ep->pio_irqs = ep->dma_irqs = 0;
+	ep->ep.maxpacket = le16_to_cpu (desc->wMaxPacketSize);
+
+	/* flush fifo (mostly for OUT buffers) */
+	pxa27x_ep_fifo_flush (_ep);
+
+	/* ... reset halt state too, if we could ... */
+
+#ifdef USE_DMA
+	/* for (some) bulk and ISO endpoints, try to get a DMA channel and
+	 * bind it to the endpoint.  otherwise use PIO.
+	 */
+	DMSG("%s: called attributes=%d\n", __FUNCTION__, ep->ep_type);
+	switch (ep->ep_type) {
+	case USB_ENDPOINT_XFER_ISOC:
+		if (le16_to_cpu(desc->wMaxPacketSize) % 32)
+			break;
+		// fall through
+	case USB_ENDPOINT_XFER_BULK:
+		if (!use_dma || !ep->reg_drcmr)
+			break;
+		ep->dma = pxa_request_dma ((char *)_ep->name,
+ 				(le16_to_cpu (desc->wMaxPacketSize) > 64)
+					? DMA_PRIO_MEDIUM /* some iso */
+					: DMA_PRIO_LOW,
+				dma_nodesc_handler, ep);
+		if (ep->dma >= 0) {
+			*ep->reg_drcmr = DRCMR_MAPVLD | ep->dma;
+			DMSG("%s using dma%d\n", _ep->name, ep->dma);
+		}
+	default:
+		break;
+	}
+#endif
+	DBG(DBG_VERBOSE, "enabled %s\n", _ep->name);
+	return 0;
+}
+
+static int pxa27x_ep_disable (struct usb_ep *_ep)
+{
+	struct pxa27x_ep	*ep;
+
+	ep = container_of (_ep, struct pxa27x_ep, ep);
+	if (!_ep || !ep->desc) {
+		DMSG("%s, %s not enabled\n", __FUNCTION__,
+			_ep ? ep->ep.name : NULL);
+		return -EINVAL;
+	}
+	nuke (ep, -ESHUTDOWN);
+
+#ifdef	USE_DMA
+	if (ep->dma >= 0) {
+		*ep->reg_drcmr = 0;
+		pxa_free_dma (ep->dma);
+		ep->dma = -1;
+	}
+#endif
+
+	/* flush fifo (mostly for IN buffers) */
+	pxa27x_ep_fifo_flush (_ep);
+
+	ep->desc = 0;
+	ep->stopped = 1;
+
+	DBG(DBG_VERBOSE, "%s disabled\n", _ep->name);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* for the pxa27x, these can just wrap kmalloc/kfree.  gadget drivers
+ * must still pass correctly initialized endpoints, since other controller
+ * drivers may care about how it's currently set up (dma issues etc).
+ */
+
+/*
+ * 	pxa27x_ep_alloc_request - allocate a request data structure
+ */
+static struct usb_request *
+pxa27x_ep_alloc_request (struct usb_ep *_ep, unsigned gfp_flags)
+{
+	struct pxa27x_request *req;
+
+	req = kmalloc (sizeof *req, gfp_flags);
+	if (!req)
+		return 0;
+
+	memset (req, 0, sizeof *req);
+	INIT_LIST_HEAD (&req->queue);
+	return &req->req;
+}
+
+
+/*
+ * 	pxa27x_ep_free_request - deallocate a request data structure
+ */
+static void
+pxa27x_ep_free_request (struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct pxa27x_request *req;
+
+	req = container_of(_req, struct pxa27x_request, req);
+	WARN_ON (!list_empty (&req->queue));
+	kfree(req);
+}
+
+
+/* PXA cache needs flushing with DMA I/O (it's dma-incoherent), but there's
+ * no device-affinity and the heap works perfectly well for i/o buffers.
+ * It wastes much less memory than dma_alloc_coherent() would, and even
+ * prevents cacheline (32 bytes wide) sharing problems.
+ */
+static void *
+pxa27x_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
+	dma_addr_t *dma, unsigned gfp_flags)
+{
+	char			*retval;
+
+	retval = kmalloc (bytes, gfp_flags & ~(__GFP_DMA|__GFP_HIGHMEM));
+	if (retval)
+		*dma = virt_to_bus (retval);
+	return retval;
+}
+
+static void
+pxa27x_ep_free_buffer(struct usb_ep *_ep, void *buf, dma_addr_t dma,
+		unsigned bytes)
+{
+	kfree (buf);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ *	done - retire a request; caller blocked irqs
+ */
+static void done(struct pxa27x_ep *ep, struct pxa27x_request *req, int status)
+{
+	list_del_init(&req->queue);
+	if (likely (req->req.status == -EINPROGRESS))
+		req->req.status = status;
+	else
+		status = req->req.status;
+
+	if (status && status != -ESHUTDOWN)
+		DBG(DBG_VERBOSE, "complete %s req %p stat %d len %u/%u\n",
+			ep->ep.name, &req->req, status,
+			req->req.actual, req->req.length);
+
+	/* don't modify queue heads during completion callback */
+	req->req.complete(&ep->ep, &req->req);
+}
+
+
+static inline void ep0_idle (struct pxa27x_udc *dev)
+{
+	dev->ep0state = EP0_IDLE;
+	LED_EP0_OFF;
+}
+
+static int
+write_packet(volatile u32 *uddr, struct pxa27x_request *req, unsigned max)
+{
+	u32		*buf;
+	int	length, count, remain;
+
+	buf = (u32*)(req->req.buf + req->req.actual);
+	prefetch(buf);
+
+	/* how big will this packet be? */
+	length = min(req->req.length - req->req.actual, max);
+	req->req.actual += length;
+
+	remain = length & 0x3;
+	count = length & ~(0x3);
+
+	while (likely(count)) {
+		*uddr = *buf++;
+		count -= 4;
+	}
+
+	if (remain) {
+		volatile u8* reg=(u8*)uddr;
+		char *rd =(u8*)buf;
+
+		while (remain--) {
+			*reg=*rd++;
+		}
+	}
+
+	return length;
+}
+
+/*
+ * write to an IN endpoint fifo, as many packets as possible.
+ * irqs will use this to write the rest later.
+ * caller guarantees at least one packet buffer is ready (or a zlp).
+ */
+static int
+write_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req)
+{
+	unsigned		max;
+
+	max = le16_to_cpu(ep->desc->wMaxPacketSize);
+	do {
+		int	count;
+		int		is_last, is_short;
+
+		count = write_packet(ep->reg_udcdr, req, max);
+
+		/* last packet is usually short (or a zlp) */
+		if (unlikely (count != max))
+			is_last = is_short = 1;
+		else {
+			if (likely(req->req.length != req->req.actual)
+					|| req->req.zero)
+				is_last = 0;
+			else
+				is_last = 1;
+			/* interrupt/iso maxpacket may not fill the fifo */
+			is_short = unlikely (max < ep->fifo_size);
+		}
+
+		DMSG("wrote %s count:%d bytes%s%s %d left %p\n",
+			ep->ep.name, count,
+			is_last ? "/L" : "", is_short ? "/S" : "",
+			req->req.length - req->req.actual, &req->req);
+
+		/* let loose that packet. maybe try writing another one,
+		 * double buffering might work.  TSP, TPC, and TFS
+		 * bit values are the same for all normal IN endpoints.
+		 */
+		*ep->reg_udccsr = UDCCSR_PC;
+		if (is_short)
+			*ep->reg_udccsr = UDCCSR_SP;
+
+		/* requests complete when all IN data is in the FIFO */
+		if (is_last) {
+			done (ep, req, 0);
+			if (list_empty(&ep->queue) || unlikely(ep->dma >= 0)) {
+				pio_irq_disable (ep->ep_num);
+#ifdef USE_DMA
+				/* unaligned data and zlps couldn't use dma */
+				if (unlikely(!list_empty(&ep->queue))) {
+					req = list_entry(ep->queue.next,
+						struct pxa27x_request, queue);
+					kick_dma(ep,req);
+					return 0;
+				}
+#endif
+			}
+			return 1;
+		}
+
+		// TODO experiment: how robust can fifo mode tweaking be?
+		// double buffering is off in the default fifo mode, which
+		// prevents TFS from being set here.
+
+	} while (*ep->reg_udccsr & UDCCSR_FS);
+	return 0;
+}
+
+/* caller asserts req->pending (ep0 irq status nyet cleared); starts
+ * ep0 data stage.  these chips want very simple state transitions.
+ */
+static inline
+void ep0start(struct pxa27x_udc *dev, u32 flags, const char *tag)
+{
+	UDCCSR0 = flags|UDCCSR0_SA|UDCCSR0_OPC;
+	UDCISR0 = UDCICR_INT(0, UDC_INT_FIFOERROR | UDC_INT_PACKETCMP);
+	dev->req_pending = 0;
+	DBG(DBG_VERY_NOISY, "%s %s, %02x/%02x\n",
+		__FUNCTION__, tag, UDCCSR0, flags);
+}
+
+static int
+write_ep0_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req)
+{
+	unsigned	count;
+	int		is_short;
+
+	count = write_packet(&UDCDR0, req, EP0_FIFO_SIZE);
+	ep->dev->stats.write.bytes += count;
+
+	/* last packet "must be" short (or a zlp) */
+	is_short = (count != EP0_FIFO_SIZE);
+
+	DBG(DBG_VERY_NOISY, "ep0in %d bytes %d left %p\n", count,
+		req->req.length - req->req.actual, &req->req);
+
+	if (unlikely (is_short)) {
+		if (ep->dev->req_pending)
+			ep0start(ep->dev, UDCCSR0_IPR, "short IN");
+		else
+			UDCCSR0 = UDCCSR0_IPR;
+
+		count = req->req.length;
+		done (ep, req, 0);
+		ep0_idle(ep->dev);
+#if 0
+		/* This seems to get rid of lost status irqs in some cases:
+		 * host responds quickly, or next request involves config
+		 * change automagic, or should have been hidden, or ...
+		 *
+		 * FIXME get rid of all udelays possible...
+		 */
+		if (count >= EP0_FIFO_SIZE) {
+			count = 100;
+			do {
+				if ((UDCCSR0 & UDCCSR0_OPC) != 0) {
+					/* clear OPC, generate ack */
+					UDCCSR0 = UDCCSR0_OPC;
+					break;
+				}
+				count--;
+				udelay(1);
+			} while (count);
+		}
+#endif
+	} else if (ep->dev->req_pending)
+		ep0start(ep->dev, 0, "IN");
+	return is_short;
+}
+
+
+/*
+ * read_fifo -  unload packet(s) from the fifo we use for usb OUT
+ * transfers and put them into the request.  caller should have made
+ * sure there's at least one packet ready.
+ *
+ * returns true if the request completed because of short packet or the
+ * request buffer having filled (and maybe overran till end-of-packet).
+ */
+static int
+read_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req)
+{
+	for (;;) {
+		u32		*buf;
+		int	bufferspace, count, is_short;
+
+		/* make sure there's a packet in the FIFO.*/
+		if (unlikely ((*ep->reg_udccsr & UDCCSR_PC) == 0))
+			break;
+		buf =(u32*) (req->req.buf + req->req.actual);
+		prefetchw(buf);
+		bufferspace = req->req.length - req->req.actual;
+
+		/* read all bytes from this packet */
+		if (likely (*ep->reg_udccsr & UDCCSR_BNE)) {
+			count = 0x3ff & *ep->reg_udcbcr;
+			req->req.actual += min (count, bufferspace);
+		} else /* zlp */
+			count = 0;
+
+		is_short = (count < ep->ep.maxpacket);
+		DMSG("read %s udccsr:%02x, count:%d bytes%s req %p %d/%d\n",
+			ep->ep.name, *ep->reg_udccsr, count,
+			is_short ? "/S" : "",
+			&req->req, req->req.actual, req->req.length);
+
+//		dump_regs(ep->ep_num );
+		count = min(count, bufferspace);
+		while (likely (count > 0)) {
+			*buf++ = *ep->reg_udcdr;
+			count -= 4;
+		}
+		DMSG("Buf:0x%p\n", req->req.buf);
+
+		*ep->reg_udccsr =  UDCCSR_PC;
+		/* RPC/RSP/RNE could now reflect the other packet buffer */
+
+		/* completion */
+		if (is_short || req->req.actual == req->req.length) {
+			done (ep, req, 0);
+			if (list_empty(&ep->queue))
+				pio_irq_disable (ep->ep_num);
+			return 1;
+		}
+
+		/* finished that packet.  the next one may be waiting... */
+	}
+	return 0;
+}
+
+/*
+ * special ep0 version of the above.  no UBCR0 or double buffering; status
+ * handshaking is magic.  most device protocols don't need control-OUT.
+ * CDC vendor commands (and RNDIS), mass storage CB/CBI, and some other
+ * protocols do use them.
+ */
+static int
+read_ep0_fifo (struct pxa27x_ep *ep, struct pxa27x_request *req)
+{
+	u32		*buf, word;
+	unsigned	bufferspace;
+
+	buf = (u32*) (req->req.buf + req->req.actual);
+	bufferspace = req->req.length - req->req.actual;
+
+	while (UDCCSR0 & UDCCSR0_RNE) {
+		word = UDCDR0;
+
+		if (unlikely (bufferspace == 0)) {
+			/* this happens when the driver's buffer
+			 * is smaller than what the host sent.
+			 * discard the extra data.
+			 */
+			if (req->req.status != -EOVERFLOW)
+				DMSG("%s overflow\n", ep->ep.name);
+			req->req.status = -EOVERFLOW;
+		} else {
+			*buf++ = word;
+			req->req.actual += 4;
+			bufferspace -= 4;
+		}
+	}
+
+	UDCCSR0 = UDCCSR0_OPC ;
+
+	/* completion */
+	if (req->req.actual >= req->req.length)
+		return 1;
+
+	/* finished that packet.  the next one may be waiting... */
+	return 0;
+}
+
+#ifdef	USE_DMA
+
+#define	MAX_IN_DMA	((DCMD_LENGTH + 1) - BULK_FIFO_SIZE)
+static void kick_dma(struct pxa27x_ep *ep, struct pxa27x_request *req)
+{
+	u32	dcmd = 0;
+	u32	len = req->req.length;
+	u32	buf = req->req.dma;
+	u32	fifo = io_v2p ((u32)ep->reg_udcdr);
+
+	buf += req->req.actual;
+	len -= req->req.actual;
+	ep->dma_con = 0;
+
+	DMSG("%s: req:0x%p length:%d, actual:%d dma:%d\n",
+			__FUNCTION__, &req->req, req->req.length,
+			req->req.actual,ep->dma);
+
+	/* no-descriptor mode can be simple for bulk-in, iso-in, iso-out */
+	DCSR(ep->dma) = DCSR_NODESC;
+	if (buf & 0x3)
+		DALGN |= 1 << ep->dma;
+	else
+		DALGN &= ~(1 << ep->dma);
+
+	if (ep->dir_in) {
+		DSADR(ep->dma) = buf;
+		DTADR(ep->dma) = fifo;
+		if (len > MAX_IN_DMA) {
+			len= MAX_IN_DMA;
+			ep->dma_con =1 ;
+		} else if (len >= ep->ep.maxpacket) {
+			if ((ep->dma_con = (len % ep->ep.maxpacket) != 0))
+				len = ep->ep.maxpacket;
+		}
+		 dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN
+			| DCMD_FLOWTRG | DCMD_INCSRCADDR;
+	} else {
+		DSADR(ep->dma) = fifo;
+		DTADR(ep->dma) = buf;
+		dcmd = len | DCMD_BURST32 | DCMD_WIDTH4 | DCMD_ENDIRQEN
+			| DCMD_FLOWSRC | DCMD_INCTRGADDR;
+	}
+	*ep->reg_udccsr = UDCCSR_DME;
+	DCMD(ep->dma) = dcmd;
+	DCSR(ep->dma) =  DCSR_NODESC | DCSR_EORIRQEN \
+				| ((ep->dir_in) ? DCSR_STOPIRQEN : 0);
+	*ep->reg_drcmr = ep->dma | DRCMR_MAPVLD;
+	DCSR(ep->dma) |= DCSR_RUN;
+}
+
+static void cancel_dma(struct pxa27x_ep *ep)
+{
+	struct pxa27x_request	*req;
+	u32			tmp;
+
+	if (DCSR(ep->dma) == 0 || list_empty(&ep->queue))
+		return;
+
+	DMSG("hehe dma:%d,dcsr:0x%x\n", ep->dma, DCSR(ep->dma));
+	DCSR(ep->dma) = 0;
+	while ((DCSR(ep->dma) & DCSR_STOPSTATE) == 0)
+		cpu_relax();
+
+	req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+	tmp = DCMD(ep->dma) & DCMD_LENGTH;
+	req->req.actual = req->req.length - tmp;
+
+	/* the last tx packet may be incomplete, so flush the fifo.
+	 * FIXME correct req.actual if we can
+	 */
+	*ep->reg_udccsr = UDCCSR_FEF;
+}
+
+static void dma_nodesc_handler(int dmach, void *_ep)
+{
+	struct pxa27x_ep	*ep = _ep;
+	struct pxa27x_request	*req, *req_next;
+	u32			dcsr, tmp, completed;
+
+	local_irq_disable();
+
+	req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+
+	DMSG("%s, buf:0x%p\n",__FUNCTION__, req->req.buf);
+
+	ep->dma_irqs++;
+	ep->dev->stats.irqs++;
+	HEX_DISPLAY(ep->dev->stats.irqs);
+
+	completed = 0;
+
+	dcsr = DCSR(dmach);
+	DCSR(ep->dma) &= ~DCSR_RUN;
+
+	if (dcsr & DCSR_BUSERR) {
+		DCSR(dmach) = DCSR_BUSERR;
+		printk(KERN_ERR " Buss Error\n");
+		req->req.status = -EIO;
+		completed = 1;
+	} else if (dcsr & DCSR_ENDINTR) {
+		DCSR(dmach) = DCSR_ENDINTR;
+		if (ep->dir_in) {
+			tmp = req->req.length - req->req.actual;
+			/* Last packet is a short one*/
+			if ( tmp < ep->ep.maxpacket) {
+				int count = 0;
+
+				*ep->reg_udccsr = UDCCSR_SP | \
+					(*ep->reg_udccsr & UDCCSR_MASK);
+				/*Wait for packet out */
+				while( (count++ < 10000) && \
+					!(*ep->reg_udccsr & UDCCSR_FS));
+				if (count >= 10000)
+					DMSG("Failed to send packet\n");
+				else
+					DMSG("%s: short packet sent len:%d,"
+					"length:%d,actual:%d\n", __FUNCTION__,
+					tmp, req->req.length, req->req.actual);
+				req->req.actual = req->req.length;
+				completed = 1;
+			/* There are still packets to transfer */
+			} else if ( ep->dma_con) {
+				DMSG("%s: more packets,length:%d,actual:%d\n",
+					 __FUNCTION__,req->req.length,
+					 req->req.actual);
+				req->req.actual += ep->ep.maxpacket;
+				completed = 0;
+			} else {
+				DMSG("%s: no more packets,length:%d,"
+					"actual:%d\n", __FUNCTION__,
+					req->req.length, req->req.actual);
+				req->req.actual = req->req.length;
+				completed = 1;
+			}
+		} else {
+			req->req.actual = req->req.length;
+			completed = 1;
+		}
+	} else if (dcsr & DCSR_EORINTR) { //Only happened in OUT DMA
+		int remain,udccsr ;
+
+		DCSR(dmach) = DCSR_EORINTR;
+		remain = DCMD(dmach) & DCMD_LENGTH;
+		req->req.actual = req->req.length - remain;
+
+		udccsr = *ep->reg_udccsr;
+		if (udccsr & UDCCSR_SP) {
+			*ep->reg_udccsr = UDCCSR_PC | (udccsr & UDCCSR_MASK);
+			completed = 1;
+		}
+		DMSG("%s: length:%d actual:%d\n",
+				__FUNCTION__, req->req.length, req->req.actual);
+	} else
+		DMSG("%s: Others dma:%d DCSR:0x%x DCMD:0x%x\n",
+				__FUNCTION__, dmach, DCSR(dmach), DCMD(dmach));
+
+	if (likely(completed)) {
+		if (req->queue.next != &ep->queue) {
+			req_next = list_entry(req->queue.next,
+					struct pxa27x_request, queue);
+			kick_dma(ep, req_next);
+		}
+		done(ep, req, 0);
+	} else {
+		kick_dma(ep, req);
+	}
+
+	local_irq_enable();
+}
+
+#endif
+/*-------------------------------------------------------------------------*/
+
+static int
+pxa27x_ep_queue(struct usb_ep *_ep, struct usb_request *_req, unsigned gfp_flags)
+{
+	struct pxa27x_ep	*ep;
+	struct pxa27x_request	*req;
+	struct pxa27x_udc	*dev;
+	unsigned long		flags;
+
+	req = container_of(_req, struct pxa27x_request, req);
+	if (unlikely (!_req || !_req->complete || !_req->buf||
+			!list_empty(&req->queue))) {
+		DMSG("%s, bad params\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	ep = container_of(_ep, struct pxa27x_ep, ep);
+	if (unlikely (!_ep || (!ep->desc && ep->ep.name != ep0name))) {
+		DMSG("%s, bad ep\n", __FUNCTION__);
+		return -EINVAL;
+	}
+
+	DMSG("%s, ep point %d is queue\n", __FUNCTION__, ep->ep_num);
+
+	dev = ep->dev;
+	if (unlikely (!dev->driver
+			|| dev->gadget.speed == USB_SPEED_UNKNOWN)) {
+		DMSG("%s, bogus device state\n", __FUNCTION__);
+		return -ESHUTDOWN;
+	}
+
+	/* iso is always one packet per request, that's the only way
+	 * we can report per-packet status.  that also helps with dma.
+	 */
+	if (unlikely (ep->ep_type == USB_ENDPOINT_XFER_ISOC
+			&& req->req.length > le16_to_cpu
+						(ep->desc->wMaxPacketSize)))
+		return -EMSGSIZE;
+
+#ifdef	USE_DMA
+	// FIXME caller may already have done the dma mapping
+	if (ep->dma >= 0) {
+		_req->dma = dma_map_single(dev->dev, _req->buf, _req->length,
+			(ep->dir_in) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+	}
+#endif
+
+	DBG(DBG_NOISY, "%s queue req %p, len %d buf %p\n",
+	     _ep->name, _req, _req->length, _req->buf);
+
+	local_irq_save(flags);
+
+	_req->status = -EINPROGRESS;
+	_req->actual = 0;
+
+	/* kickstart this i/o queue? */
+	if (list_empty(&ep->queue) && !ep->stopped) {
+		if (ep->desc == 0 /* ep0 */) {
+			unsigned	length = _req->length;
+
+			switch (dev->ep0state) {
+			case EP0_IN_DATA_PHASE:
+				dev->stats.write.ops++;
+				if (write_ep0_fifo(ep, req))
+					req = 0;
+				break;
+
+			case EP0_OUT_DATA_PHASE:
+				dev->stats.read.ops++;
+				if (dev->req_pending)
+					ep0start(dev, UDCCSR0_IPR, "OUT");
+				if (length == 0 || ((UDCCSR0 & UDCCSR0_RNE) != 0
+						&& read_ep0_fifo(ep, req))) {
+					ep0_idle(dev);
+					done(ep, req, 0);
+					req = 0;
+				}
+				break;
+			case EP0_NO_ACTION:
+				ep0_idle(dev);
+				req=0;
+				break;
+			default:
+				DMSG("ep0 i/o, odd state %d\n", dev->ep0state);
+				local_irq_restore (flags);
+				return -EL2HLT;
+			}
+#ifdef USE_DMA
+		/* either start dma or prime pio pump */
+		} else if (ep->dma >= 0) {
+			kick_dma(ep, req);
+#endif
+		/* can the FIFO can satisfy the request immediately? */
+		} else if (ep->dir_in
+				&& (*ep->reg_udccsr & UDCCSR_FS) != 0
+				&& write_fifo(ep, req)) {
+			req = 0;
+		} else if ((*ep->reg_udccsr & UDCCSR_FS) != 0
+				&& read_fifo(ep, req)) {
+			req = 0;
+		}
+		DMSG("req:%p,ep->desc:%p,ep->dma:%d\n", req, ep->desc, ep->dma);
+		if (likely (req && ep->desc) && ep->dma < 0)
+			pio_irq_enable(ep->ep_num);
+	}
+
+	/* pio or dma irq handler advances the queue. */
+	if (likely (req != 0))
+		list_add_tail(&req->queue, &ep->queue);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+
+/*
+ * 	nuke - dequeue ALL requests
+ */
+static void nuke(struct pxa27x_ep *ep, int status)
+{
+	struct pxa27x_request *req;
+
+	/* called with irqs blocked */
+#ifdef	USE_DMA
+	if (ep->dma >= 0 && !ep->stopped)
+		cancel_dma(ep);
+#endif
+	while (!list_empty(&ep->queue)) {
+		req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+		done(ep, req, status);
+	}
+	if (ep->desc)
+		pio_irq_disable (ep->ep_num);
+}
+
+
+/* dequeue JUST ONE request */
+static int pxa27x_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
+	struct pxa27x_ep	*ep;
+	struct pxa27x_request	*req;
+	unsigned long		flags;
+
+	ep = container_of(_ep, struct pxa27x_ep, ep);
+	if (!_ep || ep->ep.name == ep0name)
+		return -EINVAL;
+
+	local_irq_save(flags);
+
+	/* make sure it's actually queued on this endpoint */
+	list_for_each_entry (req, &ep->queue, queue) {
+		if (&req->req == _req)
+			break;
+	}
+	if (&req->req != _req) {
+		local_irq_restore(flags);
+		return -EINVAL;
+	}
+
+#ifdef	USE_DMA
+	if (ep->dma >= 0 && ep->queue.next == &req->queue && !ep->stopped) {
+		cancel_dma(ep);
+		done(ep, req, -ECONNRESET);
+		/* restart i/o */
+		if (!list_empty(&ep->queue)) {
+			req = list_entry(ep->queue.next,
+					struct pxa27x_request, queue);
+			kick_dma(ep, req);
+		}
+	} else
+#endif
+		done(ep, req, -ECONNRESET);
+
+	local_irq_restore(flags);
+	return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int pxa27x_ep_set_halt(struct usb_ep *_ep, int value)
+{
+	struct pxa27x_ep	*ep;
+	unsigned long		flags;
+
+	DMSG("%s is called\n", __FUNCTION__);
+	ep = container_of(_ep, struct pxa27x_ep, ep);
+	if (unlikely (!_ep
+			|| (!ep->desc && ep->ep.name != ep0name))
+			|| ep->ep_type == USB_ENDPOINT_XFER_ISOC) {
+		DMSG("%s, bad ep\n", __FUNCTION__);
+		return -EINVAL;
+	}
+	if (value == 0) {
+		/* this path (reset toggle+halt) is needed to implement
+		 * SET_INTERFACE on normal hardware.  but it can't be
+		 * done from software on the PXA UDC, and the hardware
+		 * forgets to do it as part of SET_INTERFACE automagic.
+		 */
+		DMSG("only host can clear %s halt\n", _ep->name);
+		return -EROFS;
+	}
+
+	local_irq_save(flags);
+
+	if (ep->dir_in	&& ((*ep->reg_udccsr & UDCCSR_FS) == 0
+			   || !list_empty(&ep->queue))) {
+		local_irq_restore(flags);
+		return -EAGAIN;
+	}
+
+	/* FST bit is the same for control, bulk in, bulk out, interrupt in */
+	*ep->reg_udccsr = UDCCSR_FST|UDCCSR_FEF;
+
+	/* ep0 needs special care */
+	if (!ep->desc) {
+		start_watchdog(ep->dev);
+		ep->dev->req_pending = 0;
+		ep->dev->ep0state = EP0_STALL;
+		LED_EP0_OFF;
+
+ 	/* and bulk/intr endpoints like dropping stalls too */
+ 	} else {
+ 		unsigned i;
+ 		for (i = 0; i < 1000; i += 20) {
+ 			if (*ep->reg_udccsr & UDCCSR_SST)
+ 				break;
+ 			udelay(20);
+ 		}
+  	}
+ 	local_irq_restore(flags);
+
+	DBG(DBG_VERBOSE, "%s halt\n", _ep->name);
+	return 0;
+}
+
+static int pxa27x_ep_fifo_status(struct usb_ep *_ep)
+{
+	struct pxa27x_ep        *ep;
+
+	ep = container_of(_ep, struct pxa27x_ep, ep);
+	if (!_ep) {
+		DMSG("%s, bad ep\n", __FUNCTION__);
+		return -ENODEV;
+	}
+	/* pxa can't report unclaimed bytes from IN fifos */
+	if (ep->dir_in)
+		return -EOPNOTSUPP;
+	if (ep->dev->gadget.speed == USB_SPEED_UNKNOWN
+			|| (*ep->reg_udccsr & UDCCSR_FS) == 0)
+		return 0;
+	else
+		return (*ep->reg_udcbcr & 0xfff) + 1;
+}
+
+static void pxa27x_ep_fifo_flush(struct usb_ep *_ep)
+{
+	struct pxa27x_ep        *ep;
+
+	ep = container_of(_ep, struct pxa27x_ep, ep);
+	if (!_ep || ep->ep.name == ep0name || !list_empty(&ep->queue)) {
+		DMSG("%s, bad ep\n", __FUNCTION__);
+		return;
+	}
+
+	/* toggle and halt bits stay unchanged */
+
+	/* for OUT, just read and discard the FIFO contents. */
+	if (!ep->dir_in) {
+		while (((*ep->reg_udccsr) & UDCCSR_BNE) != 0)
+			(void) *ep->reg_udcdr;
+		return;
+	}
+
+	/* most IN status is the same, but ISO can't stall */
+	*ep->reg_udccsr = UDCCSR_PC|UDCCSR_FST|UDCCSR_TRN
+		| (ep->ep_type == USB_ENDPOINT_XFER_ISOC)
+			? 0 : UDCCSR_SST;
+}
+
+
+static struct usb_ep_ops pxa27x_ep_ops = {
+	.enable		= pxa27x_ep_enable,
+	.disable	= pxa27x_ep_disable,
+
+	.alloc_request	= pxa27x_ep_alloc_request,
+	.free_request	= pxa27x_ep_free_request,
+
+	.alloc_buffer	= pxa27x_ep_alloc_buffer,
+	.free_buffer	= pxa27x_ep_free_buffer,
+
+	.queue		= pxa27x_ep_queue,
+	.dequeue	= pxa27x_ep_dequeue,
+
+	.set_halt	= pxa27x_ep_set_halt,
+	.fifo_status	= pxa27x_ep_fifo_status,
+	.fifo_flush	= pxa27x_ep_fifo_flush,
+};
+
+
+/* ---------------------------------------------------------------------------
+ * 	device-scoped parts of the api to the usb controller hardware
+ * ---------------------------------------------------------------------------
+ */
+
+static int pxa27x_udc_get_frame(struct usb_gadget *_gadget)
+{
+	return (UDCFNR & 0x3FF);
+}
+
+static int pxa27x_udc_wakeup(struct usb_gadget *_gadget)
+{
+	/* host may not have enabled remote wakeup */
+	if ((UDCCR & UDCCR_DWRE) == 0)
+		return -EHOSTUNREACH;
+	udc_set_mask_UDCCR(UDCCR_UDR);
+	return 0;
+}
+
+static const struct usb_gadget_ops pxa27x_udc_ops = {
+	.get_frame	 = pxa27x_udc_get_frame,
+	.wakeup		 = pxa27x_udc_wakeup,
+	// current versions must always be self-powered
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef UDC_PROC_FILE
+
+static const char proc_node_name [] = "driver/udc";
+
+static int
+udc_proc_read(char *page, char **start, off_t off, int count,
+		int *eof, void *_dev)
+{
+	char			*buf = page;
+	struct pxa27x_udc	*dev = _dev;
+	char			*next = buf;
+	unsigned		size = count;
+	unsigned long		flags;
+	int			i, t;
+	u32			tmp;
+
+	if (off != 0)
+		return 0;
+
+	local_irq_save(flags);
+
+	/* basic device status */
+	t = scnprintf(next, size, DRIVER_DESC "\n"
+		"%s version: %s\nGadget driver: %s\n",
+		driver_name, DRIVER_VERSION SIZE_STR DMASTR,
+		dev->driver ? dev->driver->driver.name : "(none)");
+	size -= t;
+	next += t;
+
+	/* registers for device and ep0 */
+	t = scnprintf(next, size,
+		"uicr %02X.%02X, usir %02X.%02x, ufnr %02X\n",
+		UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR);
+	size -= t;
+	next += t;
+
+	tmp = UDCCR;
+	t = scnprintf(next, size,"udccr %02X =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n", tmp,
+		(tmp & UDCCR_OEN) ? " oen":"",
+		(tmp & UDCCR_AALTHNP) ? " aalthnp":"",
+		(tmp & UDCCR_AHNP) ? " rem" : "",
+		(tmp & UDCCR_BHNP) ? " rstir" : "",
+		(tmp & UDCCR_DWRE) ? " dwre" : "",
+		(tmp & UDCCR_SMAC) ? " smac" : "",
+		(tmp & UDCCR_EMCE) ? " emce" : "",
+		(tmp & UDCCR_UDR) ? " udr" : "",
+		(tmp & UDCCR_UDA) ? " uda" : "",
+		(tmp & UDCCR_UDE) ? " ude" : "",
+		(tmp & UDCCR_ACN) >> UDCCR_ACN_S,
+		(tmp & UDCCR_AIN) >> UDCCR_AIN_S,
+		(tmp & UDCCR_AAISN)>> UDCCR_AAISN_S );
+
+	size -= t;
+	next += t;
+
+	tmp = UDCCSR0;
+	t = scnprintf(next, size,
+		"udccsr0 %02X =%s%s%s%s%s%s%s\n", tmp,
+		(tmp & UDCCSR0_SA) ? " sa" : "",
+		(tmp & UDCCSR0_RNE) ? " rne" : "",
+		(tmp & UDCCSR0_FST) ? " fst" : "",
+		(tmp & UDCCSR0_SST) ? " sst" : "",
+		(tmp & UDCCSR0_DME) ? " dme" : "",
+		(tmp & UDCCSR0_IPR) ? " ipr" : "",
+		(tmp & UDCCSR0_OPC) ? " opc" : "");
+	size -= t;
+	next += t;
+
+	if (!dev->driver)
+		goto done;
+
+	t = scnprintf(next, size, "ep0 IN %lu/%lu, OUT %lu/%lu\nirqs %lu\n\n",
+		dev->stats.write.bytes, dev->stats.write.ops,
+		dev->stats.read.bytes, dev->stats.read.ops,
+		dev->stats.irqs);
+	size -= t;
+	next += t;
+
+	/* dump endpoint queues */
+	for (i = 0; i < UDC_EP_NUM; i++) {
+		struct pxa27x_ep	*ep = &dev->ep [i];
+		struct pxa27x_request	*req;
+		int			t;
+
+		if (i != 0) {
+			const struct usb_endpoint_descriptor	*d;
+
+			d = ep->desc;
+			if (!d)
+				continue;
+			tmp = *dev->ep [i].reg_udccsr;
+			t = scnprintf(next, size,
+				"%s max %d %s udccs %02x udccr:0x%x\n",
+				ep->ep.name, le16_to_cpu (d->wMaxPacketSize),
+				(ep->dma >= 0) ? "dma" : "pio", tmp,
+				*dev->ep[i].reg_udccr);
+			/* TODO translate all five groups of udccs bits! */
+
+		} else /* ep0 should only have one transfer queued */
+			t = scnprintf(next, size, "ep0 max 16 pio irqs %lu\n",
+				ep->pio_irqs);
+		if (t <= 0 || t > size)
+			goto done;
+		size -= t;
+		next += t;
+
+		if (list_empty(&ep->queue)) {
+			t = scnprintf(next, size, "\t(nothing queued)\n");
+			if (t <= 0 || t > size)
+				goto done;
+			size -= t;
+			next += t;
+			continue;
+		}
+		list_for_each_entry(req, &ep->queue, queue) {
+#ifdef	USE_DMA
+			if (ep->dma >= 0 && req->queue.prev == &ep->queue)
+				t = scnprintf(next, size,
+					"\treq %p len %d/%d "
+					"buf %p (dma%d dcmd %08x)\n",
+					&req->req, req->req.actual,
+					req->req.length, req->req.buf,
+					ep->dma, DCMD(ep->dma)
+					// low 13 bits == bytes-to-go
+					);
+			else
+#endif
+				t = scnprintf(next, size,
+					"\treq %p len %d/%d buf %p\n",
+					&req->req, req->req.actual,
+					req->req.length, req->req.buf);
+			if (t <= 0 || t > size)
+				goto done;
+			size -= t;
+			next += t;
+		}
+	}
+
+done:
+	local_irq_restore(flags);
+	*eof = 1;
+	return count - size;
+}
+
+#define create_proc_files() \
+	create_proc_read_entry(proc_node_name, 0, NULL, udc_proc_read, dev)
+#define remove_proc_files() \
+	remove_proc_entry(proc_node_name, NULL)
+
+#else	/* !UDC_PROC_FILE */
+#define create_proc_files() do {} while (0)
+#define remove_proc_files() do {} while (0)
+
+#endif	/* UDC_PROC_FILE */
+
+/* "function" sysfs attribute */
+static ssize_t
+show_function (struct device *_dev, struct device_attribute *attr, char *buf)
+{
+	struct pxa27x_udc	*dev = dev_get_drvdata (_dev);
+
+	if (!dev->driver
+			|| !dev->driver->function
+			|| strlen (dev->driver->function) > PAGE_SIZE)
+		return 0;
+	return scnprintf (buf, PAGE_SIZE, "%s\n", dev->driver->function);
+}
+static DEVICE_ATTR (function, S_IRUGO, show_function, NULL);
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * 	udc_disable - disable USB device controller
+ */
+static void udc_disable(struct pxa27x_udc *dev)
+{
+	UDCICR0 = UDCICR1 = 0x00000000;
+
+	udc_clear_mask_UDCCR(UDCCR_UDE);
+
+        /* Disable clock for USB device */
+	pxa_set_cken(CKEN11_USB, 0);
+
+	ep0_idle (dev);
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+	LED_CONNECTED_OFF;
+	if (dev->mach->udc_command)
+		dev->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+}
+
+
+/*
+ * 	udc_reinit - initialize software state
+ */
+static void udc_reinit(struct pxa27x_udc *dev)
+{
+	u32	i;
+
+	dev->ep0state = EP0_IDLE;
+
+	/* basic endpoint records init */
+	for (i = 0; i < UDC_EP_NUM; i++) {
+		struct pxa27x_ep *ep = &dev->ep[i];
+
+		ep->stopped = 0;
+		ep->pio_irqs = ep->dma_irqs = 0;
+	}
+	dev->configuration = 0;
+	dev->interface = 0;
+	dev->alternate = 0;
+	/* the rest was statically initialized, and is read-only */
+}
+
+/* until it's enabled, this UDC should be completely invisible
+ * to any USB host.
+ */
+static void udc_enable (struct pxa27x_udc *dev)
+{
+	udc_clear_mask_UDCCR(UDCCR_UDE);
+
+	// MST_MSCWR2 &= ~(MST_MSCWR2_nUSBC_SC);
+
+        /* Enable clock for USB device */
+	pxa_set_cken(CKEN11_USB, 1);
+
+	UDCICR0 = UDCICR1 = 0;
+
+	ep0_idle(dev);
+	dev->gadget.speed = USB_SPEED_FULL;
+	dev->stats.irqs = 0;
+
+	udc_set_mask_UDCCR(UDCCR_UDE);
+	udelay (2);
+	if (UDCCR & UDCCR_EMCE)
+	{
+		printk(KERN_ERR ": There are error in configuration, udc disabled\n");
+	}
+
+	/* caller must be able to sleep in order to cope
+	 * with startup transients.
+	 */
+	msleep(100);
+
+	/* enable suspend/resume and reset irqs */
+	UDCICR1 = UDCICR1_IECC | UDCICR1_IERU | UDCICR1_IESU | UDCICR1_IERS;
+
+	/* enable ep0 irqs */
+	UDCICR0 = UDCICR_INT(0,UDCICR_INT_MASK);
+#if 0
+	for(i=1; i < UDC_EP_NUM; i++) {
+		if (dev->ep[i].assigned)
+			pio_irq_enable(i);
+	}
+#endif
+	if (dev->mach->udc_command)
+		dev->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+}
+
+
+/* when a driver is successfully registered, it will receive
+ * control requests including set_configuration(), which enables
+ * non-control requests.  then usb traffic follows until a
+ * disconnect is reported.  then a host may connect again, or
+ * the driver might get unbound.
+ */
+int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+{
+	struct pxa27x_udc	*dev = the_controller;
+	int			retval;
+#if 0
+	DMSG("dev=0x%x, driver=0x%x, speed=%d,"
+			"bind=0x%x, unbind=0x%x, disconnect=0x%x, setup=0x%x\n",
+			(unsigned)dev, (unsigned)driver, driver->speed,
+			(unsigned)driver->bind, (unsigned)driver->unbind,
+			(unsigned)driver->disconnect, (unsigned)driver->setup);
+#endif
+	if (!driver 	|| driver->speed != USB_SPEED_FULL
+			|| !driver->bind
+			|| !driver->unbind
+			|| !driver->disconnect
+			|| !driver->setup)
+		return -EINVAL;
+	if (!dev)
+		return -ENODEV;
+	if (dev->driver)
+		return -EBUSY;
+
+	/* first hook up the driver ... */
+	dev->driver = driver;
+	dev->gadget.dev.driver = &driver->driver;
+
+	device_add (&dev->gadget.dev);
+	retval = driver->bind(&dev->gadget);
+	if (retval) {
+		DMSG("bind to driver %s --> error %d\n",
+				driver->driver.name, retval);
+		device_del (&dev->gadget.dev);
+
+		dev->driver = 0;
+		dev->gadget.dev.driver = 0;
+		return retval;
+	}
+	device_create_file(dev->dev, &dev_attr_function);
+
+	/* ... then enable host detection and ep0; and we're ready
+	 * for set_configuration as well as eventual disconnect.
+	 * NOTE:  this shouldn't power up until later.
+	 */
+	DMSG("registered gadget driver '%s'\n", driver->driver.name);
+	udc_enable(dev);
+	dump_state(dev);
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_register_driver);
+
+static void
+stop_activity(struct pxa27x_udc *dev, struct usb_gadget_driver *driver)
+{
+	int i;
+
+	DMSG("Trace path 1\n");
+	/* don't disconnect drivers more than once */
+	if (dev->gadget.speed == USB_SPEED_UNKNOWN)
+		driver = 0;
+	dev->gadget.speed = USB_SPEED_UNKNOWN;
+
+	/* prevent new request submissions, kill any outstanding requests  */
+	for (i = 0; i < UDC_EP_NUM; i++) {
+		struct pxa27x_ep *ep = &dev->ep[i];
+
+		ep->stopped = 1;
+		nuke(ep, -ESHUTDOWN);
+	}
+	del_timer_sync(&dev->timer);
+
+	/* report disconnect; the driver is already quiesced */
+	if (driver)
+		driver->disconnect(&dev->gadget);
+
+	/* re-init driver-visible data structures */
+	udc_reinit(dev);
+}
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+	struct pxa27x_udc	*dev = the_controller;
+
+	if (!dev)
+		return -ENODEV;
+	if (!driver || driver != dev->driver)
+		return -EINVAL;
+
+	local_irq_disable();
+	udc_disable(dev);
+	stop_activity(dev, driver);
+	local_irq_enable();
+
+	driver->unbind(&dev->gadget);
+	dev->driver = 0;
+
+	device_del (&dev->gadget.dev);
+	device_remove_file(dev->dev, &dev_attr_function);
+
+	DMSG("unregistered gadget driver '%s'\n", driver->driver.name);
+	dump_state(dev);
+	return 0;
+}
+EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
+#ifndef	enable_disconnect_irq
+#define	enable_disconnect_irq()		do {} while (0)
+#define	disable_disconnect_irq()	do {} while (0)
+#endif
+
+
+/*-------------------------------------------------------------------------*/
+
+static inline void clear_ep_state (struct pxa27x_udc *dev)
+{
+	unsigned i;
+
+	/* hardware SET_{CONFIGURATION,INTERFACE} automagic resets endpoint
+	 * fifos, and pending transactions mustn't be continued in any case.
+	 */
+	for (i = 1; i < UDC_EP_NUM; i++)
+		nuke(&dev->ep[i], -ECONNABORTED);
+}
+
+static void udc_watchdog(unsigned long _dev)
+{
+	struct pxa27x_udc	*dev = (void *)_dev;
+
+	local_irq_disable();
+	if (dev->ep0state == EP0_STALL
+			&& (UDCCSR0 & UDCCSR0_FST) == 0
+			&& (UDCCSR0 & UDCCSR0_SST) == 0) {
+		UDCCSR0 = UDCCSR0_FST|UDCCSR0_FTF;
+		DBG(DBG_VERBOSE, "ep0 re-stall\n");
+		start_watchdog(dev);
+	}
+	local_irq_enable();
+}
+
+static void handle_ep0 (struct pxa27x_udc *dev)
+{
+	u32			udccsr0 = UDCCSR0;
+	struct pxa27x_ep	*ep = &dev->ep [0];
+	struct pxa27x_request	*req;
+	union {
+		struct usb_ctrlrequest	r;
+		u8			raw [8];
+		u32			word [2];
+	} u;
+
+	if (list_empty(&ep->queue))
+		req = 0;
+	else
+		req = list_entry(ep->queue.next, struct pxa27x_request, queue);
+
+	/* clear stall status */
+	if (udccsr0 & UDCCSR0_SST) {
+		nuke(ep, -EPIPE);
+		UDCCSR0 = UDCCSR0_SST;
+		del_timer(&dev->timer);
+		ep0_idle(dev);
+	}
+
+	/* previous request unfinished?  non-error iff back-to-back ... */
+	if ((udccsr0 & UDCCSR0_SA) != 0 && dev->ep0state != EP0_IDLE) {
+		nuke(ep, 0);
+		del_timer(&dev->timer);
+		ep0_idle(dev);
+	}
+
+	switch (dev->ep0state) {
+	case EP0_NO_ACTION:
+		printk(KERN_INFO"%s: Busy\n", __FUNCTION__);
+		/*Fall through */
+	case EP0_IDLE:
+		/* late-breaking status? */
+		udccsr0 = UDCCSR0;
+
+		/* start control request? */
+		if (likely((udccsr0 & (UDCCSR0_OPC|UDCCSR0_SA|UDCCSR0_RNE))
+				== (UDCCSR0_OPC|UDCCSR0_SA|UDCCSR0_RNE))) {
+			int i;
+
+			nuke (ep, -EPROTO);
+			/* read SETUP packet */
+			for (i = 0; i < 2; i++) {
+				if (unlikely(!(UDCCSR0 & UDCCSR0_RNE))) {
+bad_setup:
+					DMSG("SETUP %d!\n", i);
+					goto stall;
+				}
+				u.word [i] =  UDCDR0;
+			}
+			if (unlikely((UDCCSR0 & UDCCSR0_RNE) != 0))
+				goto bad_setup;
+
+			le16_to_cpus (&u.r.wValue);
+			le16_to_cpus (&u.r.wIndex);
+			le16_to_cpus (&u.r.wLength);
+
+			LED_EP0_ON;
+
+			DBG(DBG_VERBOSE, "SETUP %02x.%02x v%04x i%04x l%04x\n",
+				u.r.bRequestType, u.r.bRequest,
+				u.r.wValue, u.r.wIndex, u.r.wLength);
+			/* cope with automagic for some standard requests. */
+			dev->req_std = (u.r.bRequestType & USB_TYPE_MASK)
+						== USB_TYPE_STANDARD;
+			dev->req_config = 0;
+			dev->req_pending = 1;
+#if 0
+			switch (u.r.bRequest) {
+			/* hardware was supposed to hide this */
+			case USB_REQ_SET_CONFIGURATION:
+			case USB_REQ_SET_INTERFACE:
+			case USB_REQ_SET_ADDRESS:
+				printk(KERN_ERR "Should not come here\n");
+				break;
+			}
+
+#endif
+			if (u.r.bRequestType & USB_DIR_IN)
+				dev->ep0state = EP0_IN_DATA_PHASE;
+			else
+				dev->ep0state = EP0_OUT_DATA_PHASE;
+			i = dev->driver->setup(&dev->gadget, &u.r);
+
+			if (i < 0) {
+				/* hardware automagic preventing STALL... */
+				if (dev->req_config) {
+					/* hardware sometimes neglects to tell
+					 * tell us about config change events,
+					 * so later ones may fail...
+					 */
+					WARN("config change %02x fail %d?\n",
+						u.r.bRequest, i);
+					return;
+					/* TODO experiment:  if has_cfr,
+					 * hardware didn't ACK; maybe we
+					 * could actually STALL!
+					 */
+				}
+				DBG(DBG_VERBOSE, "protocol STALL, "
+					"%02x err %d\n", UDCCSR0, i);
+stall:
+				/* the watchdog timer helps deal with cases
+				 * where udc seems to clear FST wrongly, and
+				 * then NAKs instead of STALLing.
+				 */
+				ep0start(dev, UDCCSR0_FST|UDCCSR0_FTF, "stall");
+				start_watchdog(dev);
+				dev->ep0state = EP0_STALL;
+				LED_EP0_OFF;
+
+			/* deferred i/o == no response yet */
+			} else if (dev->req_pending) {
+				if (likely(dev->ep0state == EP0_IN_DATA_PHASE
+						|| dev->req_std || u.r.wLength))
+					ep0start(dev, 0, "defer");
+				else
+					ep0start(dev, UDCCSR0_IPR, "defer/IPR");
+			}
+
+			/* expect at least one data or status stage irq */
+			return;
+
+		} else {
+			/* some random early IRQ:
+			 * - we acked FST
+			 * - IPR cleared
+			 * - OPC got set, without SA (likely status stage)
+			 */
+			UDCCSR0 = udccsr0 & (UDCCSR0_SA|UDCCSR0_OPC);
+		}
+		break;
+	case EP0_IN_DATA_PHASE:			/* GET_DESCRIPTOR etc */
+		if (udccsr0 & UDCCSR0_OPC) {
+			UDCCSR0 = UDCCSR0_OPC|UDCCSR0_FTF;
+			DBG(DBG_VERBOSE, "ep0in premature status\n");
+			if (req)
+				done(ep, req, 0);
+			ep0_idle(dev);
+		} else /* irq was IPR clearing */ {
+			if (req) {
+				/* this IN packet might finish the request */
+				(void) write_ep0_fifo(ep, req);
+			} /* else IN token before response was written */
+		}
+		break;
+	case EP0_OUT_DATA_PHASE:		/* SET_DESCRIPTOR etc */
+		if (udccsr0 & UDCCSR0_OPC) {
+			if (req) {
+				/* this OUT packet might finish the request */
+				if (read_ep0_fifo(ep, req))
+					done(ep, req, 0);
+				/* else more OUT packets expected */
+			} /* else OUT token before read was issued */
+		} else /* irq was IPR clearing */ {
+			DBG(DBG_VERBOSE, "ep0out premature status\n");
+			if (req)
+				done(ep, req, 0);
+			ep0_idle(dev);
+		}
+		break;
+	case EP0_STALL:
+		UDCCSR0 = UDCCSR0_FST;
+		break;
+		}
+	UDCISR0 = UDCISR_INT(0, UDCISR_INT_MASK);
+}
+
+
+static void handle_ep(struct pxa27x_ep *ep)
+{
+	struct pxa27x_request	*req;
+	int			completed;
+	u32			udccsr=0;
+
+	DMSG("%s is called\n", __FUNCTION__);
+	do {
+		completed = 0;
+		if (likely (!list_empty(&ep->queue))) {
+			req = list_entry(ep->queue.next,
+					struct pxa27x_request, queue);
+		} else
+			req = 0;
+
+//		udccsr = *ep->reg_udccsr;
+		DMSG("%s: req:%p, udcisr0:0x%x udccsr %p:0x%x\n", __FUNCTION__,
+				req, UDCISR0, ep->reg_udccsr, *ep->reg_udccsr);
+		if (unlikely(ep->dir_in)) {
+			udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr;
+			if (unlikely (udccsr))
+				*ep->reg_udccsr = udccsr;
+
+			if (req && likely ((*ep->reg_udccsr & UDCCSR_FS) != 0))
+				completed = write_fifo(ep, req);
+
+		} else {
+			udccsr = (UDCCSR_SST | UDCCSR_TRN) & *ep->reg_udccsr;
+			if (unlikely(udccsr))
+				*ep->reg_udccsr = udccsr;
+
+			/* fifos can hold packets, ready for reading... */
+			if (likely(req)) {
+				completed = read_fifo(ep, req);
+			} else {
+				pio_irq_disable (ep->ep_num);
+				*ep->reg_udccsr = UDCCSR_FEF;
+				DMSG("%s: no req for out data\n",
+						__FUNCTION__);
+			}
+		}
+		ep->pio_irqs++;
+	} while (completed);
+}
+
+static void pxa27x_change_configuration (struct pxa27x_udc *dev)
+{
+	struct usb_ctrlrequest req ;
+
+	req.bRequestType = 0;
+	req.bRequest = USB_REQ_SET_CONFIGURATION;
+	req.wValue = dev->configuration;
+	req.wIndex = 0;
+	req.wLength = 0;
+
+	dev->ep0state = EP0_NO_ACTION;
+	dev->driver->setup(&dev->gadget, &req);
+
+}
+
+static void pxa27x_change_interface (struct pxa27x_udc *dev)
+{
+	struct usb_ctrlrequest  req;
+
+	req.bRequestType = USB_RECIP_INTERFACE;
+	req.bRequest = USB_REQ_SET_INTERFACE;
+	req.wValue = dev->alternate;
+	req.wIndex = dev->interface;
+	req.wLength = 0;
+
+	dev->ep0state = EP0_NO_ACTION;
+	dev->driver->setup(&dev->gadget, &req);
+}
+
+/*
+ *	pxa27x_udc_irq - interrupt handler
+ *
+ * avoid delays in ep0 processing. the control handshaking isn't always
+ * under software control (pxa250c0 and the pxa255 are better), and delays
+ * could cause usb protocol errors.
+ */
+static irqreturn_t
+pxa27x_udc_irq(int irq, void *_dev)
+{
+	struct pxa27x_udc	*dev = _dev;
+	int			handled;
+
+	dev->stats.irqs++;
+	HEX_DISPLAY(dev->stats.irqs);
+
+//	printk("\n");
+	DBG(DBG_VERBOSE, "Interrupt, UDCISR0:0x%08x, UDCISR1:0x%08x, "
+			"UDCCR:0x%08x\n", UDCISR0, UDCISR1, UDCCR);
+	do {
+		u32 udcir = UDCISR1 & 0xF8000000;
+
+		handled = 0;
+
+		/* SUSpend Interrupt Request */
+		if (unlikely(udcir & UDCISR1_IRSU)) {
+			UDCISR1 = UDCISR1_IRSU;
+			handled = 1;
+			DBG(DBG_VERBOSE, "USB suspend\n");
+			if (dev->gadget.speed != USB_SPEED_UNKNOWN
+					&& dev->driver
+					&& dev->driver->suspend)
+				dev->driver->suspend(&dev->gadget);
+			ep0_idle (dev);
+		}
+
+		/* RESume Interrupt Request */
+		if (unlikely(udcir & UDCISR1_IRRU)) {
+			UDCISR1 = UDCISR1_IRRU;
+			handled = 1;
+			DBG(DBG_VERBOSE, "USB resume\n");
+
+			if (dev->gadget.speed != USB_SPEED_UNKNOWN
+					&& dev->driver
+					&& dev->driver->resume)
+				dev->driver->resume(&dev->gadget);
+		}
+
+		if (unlikely(udcir & UDCISR1_IRCC)) {
+			unsigned config, interface, alternate;
+
+			handled = 1;
+			DBG(DBG_VERBOSE, "USB SET_CONFIGURATION or "
+				"SET_INTERFACE command received\n");
+
+			UDCCR |= UDCCR_SMAC;
+
+			config = (UDCCR & UDCCR_ACN) >> UDCCR_ACN_S;
+
+			if (dev->configuration != config) {
+				dev->configuration = config;
+				pxa27x_change_configuration(dev) ;
+			}
+
+			interface =  (UDCCR & UDCCR_AIN) >> UDCCR_AIN_S;
+			alternate = (UDCCR & UDCCR_AAISN) >> UDCCR_AAISN_S;
+
+			if ( (dev->configuration != interface) || \
+					(dev->alternate != alternate)){
+				dev->interface = config;
+				dev->alternate = alternate;
+				pxa27x_change_interface(dev);
+			}
+
+			UDCISR1 = UDCISR1_IRCC;
+			DMSG("%s: con:%d,inter:%d,alt:%d\n",
+				__FUNCTION__, config,interface, alternate);
+		}
+
+		/* ReSeT Interrupt Request - USB reset */
+		if (unlikely(udcir & UDCISR1_IRRS)) {
+			UDCISR1 = UDCISR1_IRRS;
+			handled = 1;
+
+			if ((UDCCR & UDCCR_UDA) == 0) {
+				DBG(DBG_VERBOSE, "USB reset start\n");
+
+				/* reset driver and endpoints,
+				 * in case that's not yet done
+				 */
+				stop_activity (dev, dev->driver);
+
+			}
+			INFO("USB reset\n");
+			dev->gadget.speed = USB_SPEED_FULL;
+			memset(&dev->stats, 0, sizeof dev->stats);
+
+		} else {
+			u32	udcisr0 = UDCISR0 ;
+			u32	udcisr1 = UDCISR1 & 0xFFFF;
+			int	i;
+
+			if (unlikely (!udcisr0 && !udcisr1))
+				continue;
+
+			DBG(DBG_VERY_NOISY, "irq %02x.%02x\n", udcisr1,udcisr0);
+
+			/* control traffic */
+			if (udcisr0 & UDCISR0_IR0) {
+				dev->ep[0].pio_irqs++;
+				handle_ep0(dev);
+				handled = 1;
+			}
+
+			udcisr0 >>= 2;
+			/* endpoint data transfers */
+			for (i = 1; udcisr0!=0 && i < 16; udcisr0>>=2,i++) {
+				UDCISR0 = UDCISR_INT(i, UDCISR_INT_MASK);
+
+				if (udcisr0 & UDC_INT_FIFOERROR)
+					printk(KERN_ERR" Endpoint %d Fifo error\n", i);
+				if (udcisr0 & UDC_INT_PACKETCMP) {
+					handle_ep(&dev->ep[i]);
+					handled = 1;
+				}
+
+			}
+
+			for (i = 0; udcisr1!=0 && i < 8; udcisr1 >>= 2, i++) {
+				UDCISR1 = UDCISR_INT(i, UDCISR_INT_MASK);
+
+				if (udcisr1 & UDC_INT_FIFOERROR) {
+					printk(KERN_ERR" Endpoint %d fifo error\n", (i+16));
+				}
+
+				if (udcisr1 & UDC_INT_PACKETCMP) {
+					handle_ep(&dev->ep[i+16]);
+					handled = 1;
+				}
+			}
+		}
+
+		/* we could also ask for 1 msec SOF (SIR) interrupts */
+
+	} while (handled);
+	return IRQ_HANDLED;
+}
+
+static inline void validate_fifo_size(struct pxa27x_ep *pxa_ep, u8 bmAttributes)
+{
+	switch (bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
+	case USB_ENDPOINT_XFER_CONTROL:
+		pxa_ep->fifo_size = EP0_FIFO_SIZE;
+		break;
+	case USB_ENDPOINT_XFER_ISOC:
+		pxa_ep->fifo_size = ISO_FIFO_SIZE;
+		break;
+	case USB_ENDPOINT_XFER_BULK:
+		pxa_ep->fifo_size = BULK_FIFO_SIZE;
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		pxa_ep->fifo_size = INT_FIFO_SIZE;
+		break;
+	default:
+		break;
+	}
+}
+
+static void udc_init_ep(struct pxa27x_udc *dev)
+{
+	int i;
+
+	INIT_LIST_HEAD (&dev->gadget.ep_list);
+	INIT_LIST_HEAD (&dev->gadget.ep0->ep_list);
+
+	for (i = 0; i < UDC_EP_NUM; i++) {
+		struct pxa27x_ep *ep = &dev->ep[i];
+
+		ep->dma = -1;
+		if (i != 0) {
+			memset(ep, 0, sizeof(*ep));
+		}
+		INIT_LIST_HEAD (&ep->queue);
+	}
+}
+#define NAME_SIZE 18
+
+struct usb_ep* pxa27x_ep_config(
+	struct usb_gadget *gadget,
+	struct usb_endpoint_descriptor *desc,
+	int config, int interface, int alt
+)
+{
+	u32 tmp ;
+	unsigned i;
+	char* name;
+	struct usb_ep * ep = NULL;
+	struct pxa27x_ep *pxa_ep = NULL;
+	struct pxa27x_udc *dev = the_controller;
+
+	DMSG("pxa27x_config_ep is called\n");
+	DMSG(" usb endpoint descriptor is:\n"
+		"	bLength:%d\n"
+		"	bDescriptorType:%x\n"
+		"	bEndpointAddress:%x\n"
+		"	bmAttributes:%x\n"
+		"	wMaxPacketSize:%d\n",
+		desc->bLength,
+		desc->bDescriptorType,desc->bEndpointAddress,
+		desc->bmAttributes,desc->wMaxPacketSize);
+
+	for (i = 1; i < UDC_EP_NUM; i++) {
+		if(!dev->ep[i].assigned) {
+			pxa_ep = &dev->ep[i];
+			pxa_ep->assigned = 1;
+			pxa_ep->ep_num = i;
+			break;
+		}
+	}
+	if (unlikely(i == UDC_EP_NUM)) {
+		printk(KERN_ERR __FILE__ ": Failed to find a spare endpoint\n");
+		return ep;
+	}
+
+
+	ep = &pxa_ep->ep;
+
+	pxa_ep->dev = dev;
+	pxa_ep->desc = desc;
+	pxa_ep->pio_irqs = pxa_ep->dma_irqs = 0;
+	pxa_ep->dma = -1;
+
+	if (!(desc->bEndpointAddress & 0xF))
+		desc->bEndpointAddress |= i;
+
+	if (!(desc->wMaxPacketSize)) {
+		validate_fifo_size(pxa_ep, desc->bmAttributes);
+		desc->wMaxPacketSize = pxa_ep->fifo_size;
+	} else
+		pxa_ep->fifo_size = desc->wMaxPacketSize;
+
+	pxa_ep->dir_in = (desc->bEndpointAddress & USB_DIR_IN) ? 1 : 0;
+	pxa_ep->ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+	pxa_ep->stopped = 1;
+	pxa_ep->dma_con = 0;
+	pxa_ep->config = config;
+	pxa_ep->interface = interface;
+	pxa_ep->aisn = alt;
+
+	pxa_ep->reg_udccsr = &UDCCSR0 + i;
+	pxa_ep->reg_udcbcr = &UDCBCR0 + i;
+	pxa_ep->reg_udcdr = &UDCDR0 + i ;
+	pxa_ep->reg_udccr = &UDCCRA - 1 + i;
+#ifdef USE_DMA
+	pxa_ep->reg_drcmr = &DRCMR24 + i;
+#endif
+
+#if 0
+	DMSG("udccsr=0x%8x, udcbcr=0x%8x, udcdr=0x%8x,"
+			"udccr0=0x%8x\n",
+			(unsigned)pxa_ep->reg_udccsr,
+			(unsigned)pxa_ep->reg_udcbcr,
+			(unsigned)pxa_ep->reg_udcdr,
+			(unsigned)pxa_ep->reg_udccr);
+#endif
+	/* Configure UDCCR */
+	tmp = 0;
+	tmp |= (pxa_ep->config << UDCCONR_CN_S) & UDCCONR_CN;
+	tmp |= (pxa_ep->interface << UDCCONR_IN_S) & UDCCONR_IN;
+	tmp |= (pxa_ep->aisn << UDCCONR_AISN_S) & UDCCONR_AISN;
+	tmp |= (desc->bEndpointAddress << UDCCONR_EN_S) & UDCCONR_EN;
+	tmp |= (pxa_ep->ep_type << UDCCONR_ET_S) & UDCCONR_ET;
+	tmp |= (pxa_ep->dir_in) ? UDCCONR_ED : 0;
+	tmp |= (min(pxa_ep->fifo_size,  (unsigned)desc->wMaxPacketSize) \
+			<< UDCCONR_MPS_S ) & UDCCONR_MPS;
+	tmp |= UDCCONR_DE | UDCCONR_EE;
+//	tmp |= UDCCONR_EE;
+
+	*pxa_ep->reg_udccr = tmp;
+
+#ifdef USE_DMA
+	/* Only BULK use DMA */
+	if ((pxa_ep->ep_type & USB_ENDPOINT_XFERTYPE_MASK)\
+			== USB_ENDPOINT_XFER_BULK)
+		*pxa_ep->reg_udccsr = UDCCSR_DME;
+#endif
+
+	DMSG("UDCCR: 0x%p is 0x%x\n", pxa_ep->reg_udccr,*pxa_ep->reg_udccr);
+
+	/* Fill ep name*/
+	name = kmalloc(NAME_SIZE, GFP_KERNEL);
+	if (!name) {
+		printk(KERN_ERR "%s: Error\n", __FUNCTION__);
+		return NULL;
+	}
+
+	switch (pxa_ep->ep_type) {
+	case USB_ENDPOINT_XFER_BULK:
+		sprintf(name, "Bulk-%s-%d", (pxa_ep->dir_in ? "in":"out"), i);
+		break;
+	case USB_ENDPOINT_XFER_INT:
+		sprintf(name, "Interrupt-%s-%d", (pxa_ep->dir_in ? \
+				"in":"out"), i);
+		break;
+	default:
+		sprintf(name, "endpoint-%s-%d", (pxa_ep->dir_in ? \
+				"in":"out"), i);
+		break;
+	}
+	ep->name = name;
+
+	ep->ops = &pxa27x_ep_ops;
+	ep->maxpacket = min((ushort)pxa_ep->fifo_size, desc->wMaxPacketSize);
+
+	list_add_tail (&ep->ep_list, &gadget->ep_list);
+	return ep;
+}
+
+EXPORT_SYMBOL(pxa27x_ep_config);
+
+/*-------------------------------------------------------------------------*/
+
+static void nop_release (struct device *dev)
+{
+	DMSG("%s %s\n", __FUNCTION__, dev->bus_id);
+}
+
+/* this uses load-time allocation and initialization (instead of
+ * doing it at run-time) to save code, eliminate fault paths, and
+ * be more obviously correct.
+ */
+static struct pxa27x_udc memory = {
+	.gadget = {
+		.ops		= &pxa27x_udc_ops,
+		.ep0		= &memory.ep[0].ep,
+		.name		= driver_name,
+		.dev = {
+			.bus_id		= "gadget",
+			.release	= nop_release,
+		},
+	},
+
+	/* control endpoint */
+	.ep[0] = {
+		.ep = {
+			.name		= ep0name,
+			.ops		= &pxa27x_ep_ops,
+			.maxpacket	= EP0_FIFO_SIZE,
+		},
+		.dev		= &memory,
+		.reg_udccsr	= &UDCCSR0,
+		.reg_udcdr	= &UDCDR0,
+	}
+};
+
+#define CP15R0_VENDOR_MASK	0xffffe000
+
+#define CP15R0_XSCALE_VALUE	0x69054000	/* intel/arm/xscale */
+
+/*
+ * 	probe - binds to the platform device
+ */
+static int __init pxa27x_udc_probe(struct platform_device *_dev)
+{
+	struct pxa27x_udc *dev = &memory;
+	int retval;
+	u32 chiprev;
+
+	/* insist on Intel/ARM/XScale */
+	asm("mrc%? p15, 0, %0, c0, c0" : "=r" (chiprev));
+	if ((chiprev & CP15R0_VENDOR_MASK) != CP15R0_XSCALE_VALUE) {
+		printk(KERN_ERR "%s: not XScale!\n", driver_name);
+		return -ENODEV;
+	}
+	/* other non-static parts of init */
+	dev->dev = &_dev->dev;
+	dev->mach = _dev->dev.platform_data;
+
+	init_timer(&dev->timer);
+	dev->timer.function = udc_watchdog;
+	dev->timer.data = (unsigned long) dev;
+
+	device_initialize(&dev->gadget.dev);
+	dev->gadget.dev.parent = &_dev->dev;
+	dev->gadget.dev.dma_mask = _dev->dev.dma_mask;
+
+	the_controller = dev;
+	platform_set_drvdata(_dev, dev);
+
+	udc_disable(dev);
+	udc_init_ep(dev);
+	udc_reinit(dev);
+
+	/* irq setup after old hardware state is cleaned up */
+	retval = request_irq(IRQ_USB, pxa27x_udc_irq,
+			SA_INTERRUPT, driver_name, dev);
+	if (retval != 0) {
+		printk(KERN_ERR "%s: can't get irq %i, err %d\n",
+			driver_name, IRQ_USB, retval);
+		return -EBUSY;
+	}
+	dev->got_irq = 1;
+
+	create_proc_files();
+
+	return 0;
+}
+
+static int __exit pxa27x_udc_remove(struct platform_device *_dev)
+{
+	struct pxa27x_udc *dev = (struct pxa27x_udc*)platform_get_drvdata(_dev);
+
+	udc_disable(dev);
+	remove_proc_files();
+	usb_gadget_unregister_driver(dev->driver);
+
+	if (dev->got_irq) {
+		free_irq(IRQ_USB, dev);
+		dev->got_irq = 0;
+	}
+	if (machine_is_lubbock() && dev->got_disc) {
+		free_irq(LUBBOCK_USB_DISC_IRQ, dev);
+		dev->got_disc = 0;
+	}
+	platform_set_drvdata(_dev, 0);
+	the_controller = 0;
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static void pxa27x_udc_shutdown(struct platform_device *_dev)
+{
+	struct pxa27x_udc *dev = (struct pxa27x_udc*)platform_get_drvdata(_dev);
+
+        udc_disable(dev);
+}
+
+static int pxa27x_udc_suspend(struct platform_device *_dev, pm_message_t state)
+{
+	int i;
+	struct pxa27x_udc *dev = (struct pxa27x_udc*)platform_get_drvdata(_dev);
+
+	DMSG("%s is called\n", __FUNCTION__);
+	dev->udccsr0 = UDCCSR0;
+	for(i=1; (i<UDC_EP_NUM); i++) {
+		if (dev->ep[i].assigned) {
+			struct pxa27x_ep *ep = &dev->ep[i];
+
+			ep->udccsr_value = *ep->reg_udccsr;
+			ep->udccr_value = *ep->reg_udccr;
+			DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n",
+				i, *ep->reg_udccsr, *ep->reg_udccr);
+		}
+	}
+
+	udc_clear_mask_UDCCR(UDCCR_UDE);
+	pxa_set_cken(CKEN11_USB, 0);
+	// MST_MSCWR2 |= MST_MSCWR2_nUSBC_SC;
+
+	return 0;
+}
+
+static int pxa27x_udc_resume(struct platform_device *_dev)
+{
+	int i;
+	struct pxa27x_udc *dev = (struct pxa27x_udc*)platform_get_drvdata(_dev);
+
+	DMSG("%s is called\n", __FUNCTION__);
+
+	UDCCSR0 = dev->udccsr0 & (UDCCSR0_FST | UDCCSR0_DME);
+	for (i=1; i < UDC_EP_NUM; i++) {
+		if (dev->ep[i].assigned) {
+			struct pxa27x_ep *ep = &dev->ep[i];
+
+			*ep->reg_udccsr = ep->udccsr_value;
+			*ep->reg_udccr = ep->udccr_value;
+			DMSG("EP%d, udccsr:0x%x, udccr:0x%x\n",
+				i, *ep->reg_udccsr, *ep->reg_udccr);
+		}
+	}
+	udc_enable(dev);
+	/* OTGPH bit is set when sleep mode is entered.
+	    * it indicates that OTG pad is retaining its state.
+	    * Upon exit from sleep mode and before clearing OTGPH,
+	    * Software must configure the USB OTG pad, UDC, and UHC
+	    * to the state they were in before entering sleep mode.*/
+	PSSR  |= PSSR_OTGPH;
+	return 0;
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+static struct platform_driver udc_driver = {
+	.driver		= {
+		.name	= "pxa2xx-udc",
+	},
+	.probe		= pxa27x_udc_probe,
+	.remove		= __exit_p(pxa27x_udc_remove),
+
+#ifdef CONFIG_PM
+	// FIXME power management support
+        .shutdown = pxa27x_udc_shutdown,
+	.suspend = pxa27x_udc_suspend,
+	.resume = pxa27x_udc_resume
+#endif
+};
+
+static int __init udc_init(void)
+{
+	printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
+	return platform_driver_register(&udc_driver);
+}
+module_init(udc_init);
+
+static void __exit udc_exit(void)
+{
+	platform_driver_unregister(&udc_driver);
+}
+module_exit(udc_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_AUTHOR("Frank Becker, Robert Schwebel, David Brownell");
+MODULE_LICENSE("GPL");
+
--- /dev/null
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -0,0 +1,332 @@
+/*
+ * linux/drivers/usb/gadget/pxa27x_udc.h
+ * Intel PXA27x on-chip full speed USB device controller
+ *
+ * Copyright (C) 2003 Robert Schwebel <r.schwebel@pengutronix.de>, Pengutronix
+ * Copyright (C) 2003 David Brownell
+ * Copyright (C) 2004 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __LINUX_USB_GADGET_PXA27X_H
+#define __LINUX_USB_GADGET_PXA27X_H
+
+#include <linux/types.h>
+
+struct pxa27x_udc;
+
+struct pxa27x_ep {
+	struct usb_ep				ep;
+	struct pxa27x_udc			*dev;
+
+	const struct usb_endpoint_descriptor	*desc;
+	struct list_head			queue;
+	unsigned long				pio_irqs;
+	unsigned long				dma_irqs;
+	
+	int					dma; 
+	unsigned				fifo_size;
+	unsigned				ep_num;
+	unsigned				ep_type;
+
+	unsigned				stopped : 1;
+	unsigned				dma_con : 1;
+	unsigned				dir_in : 1;
+	unsigned				assigned : 1;
+
+	unsigned				config;
+	unsigned				interface;
+	unsigned				aisn;
+	/* UDCCSR = UDC Control/Status Register for this EP
+	 * UBCR = UDC Byte Count Remaining (contents of OUT fifo)
+	 * UDCDR = UDC Endpoint Data Register (the fifo)
+	 * UDCCR = UDC Endpoint Configuration Registers
+	 * DRCM = DMA Request Channel Map
+	 */
+	volatile u32				*reg_udccsr;
+	volatile u32				*reg_udcbcr;
+	volatile u32				*reg_udcdr;
+	volatile u32				*reg_udccr;
+#ifdef USE_DMA
+	volatile u32				*reg_drcmr;
+#define	drcmr(n)  .reg_drcmr = & DRCMR ## n ,
+#else
+#define	drcmr(n)  
+#endif
+
+#ifdef CONFIG_PM
+	unsigned				udccsr_value;
+	unsigned				udccr_value;
+#endif
+};
+
+struct pxa27x_request {
+	struct usb_request			req;
+	struct list_head			queue;
+};
+
+enum ep0_state { 
+	EP0_IDLE,
+	EP0_IN_DATA_PHASE,
+	EP0_OUT_DATA_PHASE,
+//	EP0_END_XFER,
+	EP0_STALL,
+	EP0_NO_ACTION
+};
+
+#define EP0_FIFO_SIZE	((unsigned)16)
+#define BULK_FIFO_SIZE	((unsigned)64)
+#define ISO_FIFO_SIZE	((unsigned)256)
+#define INT_FIFO_SIZE	((unsigned)8)
+
+struct udc_stats {
+	struct ep0stats {
+		unsigned long		ops;
+		unsigned long		bytes;
+	} read, write;
+	unsigned long			irqs;
+};
+
+#ifdef CONFIG_USB_PXA27X_SMALL
+/* when memory's tight, SMALL config saves code+data.  */
+//#undef	USE_DMA
+//#define	UDC_EP_NUM	3
+#endif
+
+#ifndef	UDC_EP_NUM
+#define	UDC_EP_NUM	24
+#endif
+
+struct pxa27x_udc {
+	struct usb_gadget			gadget;
+	struct usb_gadget_driver		*driver;
+
+	enum ep0_state				ep0state;
+	struct udc_stats			stats;
+	unsigned				got_irq : 1,
+						got_disc : 1,
+						has_cfr : 1,
+						req_pending : 1,
+						req_std : 1,
+						req_config : 1;
+
+#define start_watchdog(dev) mod_timer(&dev->timer, jiffies + (HZ/200))
+	struct timer_list			timer;
+
+	struct device				*dev;
+	struct pxa2xx_udc_mach_info		*mach;
+	u64					dma_mask;
+	struct pxa27x_ep			ep [UDC_EP_NUM];
+
+	unsigned				configuration, 
+						interface, 
+						alternate;
+#ifdef CONFIG_PM
+	unsigned				udccsr0;
+#endif
+};
+
+/*-------------------------------------------------------------------------*/
+#if 0
+#ifdef DEBUG
+#define HEX_DISPLAY(n)	do { \
+	if (machine_is_mainstone())\
+		 { MST_LEDDAT1 = (n); } \
+	} while(0)
+
+#define HEX_DISPLAY1(n)	HEX_DISPLAY(n)
+
+#define HEX_DISPLAY2(n)	do { \
+	if (machine_is_mainstone()) \
+		{ MST_LEDDAT2 = (n); } \
+	} while(0)
+
+#endif /* DEBUG */
+#endif
+/*-------------------------------------------------------------------------*/
+
+/* LEDs are only for debug */
+#ifndef HEX_DISPLAY
+#define HEX_DISPLAY(n)		do {} while(0)
+#endif
+
+#ifndef LED_CONNECTED_ON
+#define LED_CONNECTED_ON	do {} while(0)
+#define LED_CONNECTED_OFF	do {} while(0)
+#endif
+#ifndef LED_EP0_ON
+#define LED_EP0_ON		do {} while (0)
+#define LED_EP0_OFF		do {} while (0)
+#endif
+
+static struct pxa27x_udc *the_controller;
+
+#if 0
+/*-------------------------------------------------------------------------*/
+
+
+/* one GPIO should be used to detect host disconnect */
+static inline int is_usb_connected(void)
+{
+	if (!the_controller->mach->udc_is_connected)
+		return 1;
+	return the_controller->mach->udc_is_connected();
+}
+
+/* one GPIO should force the host to see this device (or not) */
+static inline void make_usb_disappear(void)
+{
+	if (!the_controller->mach->udc_command)
+		return;
+	the_controller->mach->udc_command(PXA27X_UDC_CMD_DISCONNECT);
+}
+
+static inline void let_usb_appear(void)
+{
+	if (!the_controller->mach->udc_command)
+		return;
+	the_controller->mach->udc_command(PXA2XX_UDC_CMD_CONNECT);
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * Debugging support vanishes in non-debug builds.  DBG_NORMAL should be
+ * mostly silent during normal use/testing, with no timing side-effects.
+ */
+#define DBG_NORMAL	1	/* error paths, device state transitions */
+#define DBG_VERBOSE	2	/* add some success path trace info */
+#define DBG_NOISY	3	/* ... even more: request level */
+#define DBG_VERY_NOISY	4	/* ... even more: packet level */
+
+#ifdef DEBUG
+
+static const char *state_name[] = {
+	"EP0_IDLE",
+	"EP0_IN_DATA_PHASE", "EP0_OUT_DATA_PHASE",
+	"EP0_END_XFER", "EP0_STALL"
+};
+
+#define DMSG(stuff...) printk(KERN_ERR "udc: " stuff)
+
+#ifdef VERBOSE
+#    define UDC_DEBUG DBG_VERBOSE
+#else
+#    define UDC_DEBUG DBG_NORMAL
+#endif
+
+static void __attribute__ ((__unused__))
+dump_udccr(const char *label)
+{
+	u32	udccr = UDCCR;
+	DMSG("%s 0x%08x =%s%s%s%s%s%s%s%s%s%s, con=%d,inter=%d,altinter=%d\n",
+		label, udccr,
+		(udccr & UDCCR_OEN) ? " oen":"",
+		(udccr & UDCCR_AALTHNP) ? " aalthnp":"",
+		(udccr & UDCCR_AHNP) ? " rem" : "",
+		(udccr & UDCCR_BHNP) ? " rstir" : "",
+		(udccr & UDCCR_DWRE) ? " dwre" : "",
+		(udccr & UDCCR_SMAC) ? " smac" : "",
+		(udccr & UDCCR_EMCE) ? " emce" : "",
+		(udccr & UDCCR_UDR) ? " udr" : "",
+		(udccr & UDCCR_UDA) ? " uda" : "",
+		(udccr & UDCCR_UDE) ? " ude" : "",
+		(udccr & UDCCR_ACN) >> UDCCR_ACN_S,
+		(udccr & UDCCR_AIN) >> UDCCR_AIN_S,
+		(udccr & UDCCR_AAISN)>> UDCCR_AAISN_S );
+}
+
+static void __attribute__ ((__unused__))
+dump_udccsr0(const char *label)
+{
+	u32		udccsr0 = UDCCSR0;
+
+	DMSG("%s %s 0x%08x =%s%s%s%s%s%s%s\n",
+		label, state_name[the_controller->ep0state], udccsr0,
+		(udccsr0 & UDCCSR0_SA) ? " sa" : "",
+		(udccsr0 & UDCCSR0_RNE) ? " rne" : "",
+		(udccsr0 & UDCCSR0_FST) ? " fst" : "",
+		(udccsr0 & UDCCSR0_SST) ? " sst" : "",
+		(udccsr0 & UDCCSR0_DME) ? " dme" : "",
+		(udccsr0 & UDCCSR0_IPR) ? " ipr" : "",
+		(udccsr0 & UDCCSR0_OPC) ? " opr" : "");
+}
+
+static void __attribute__ ((__unused__))
+dump_state(struct pxa27x_udc *dev)
+{
+	unsigned	i;
+
+	DMSG("%s, udcicr %02X.%02X, udcsir %02X.%02x, udcfnr %02X\n",
+		state_name[dev->ep0state],
+		UDCICR1, UDCICR0, UDCISR1, UDCISR0, UDCFNR);
+	dump_udccr("udccr");
+
+	if (!dev->driver) {
+		DMSG("no gadget driver bound\n");
+		return;
+	} else
+		DMSG("ep0 driver '%s'\n", dev->driver->driver.name);
+
+	
+	dump_udccsr0 ("udccsr0");
+	DMSG("ep0 IN %lu/%lu, OUT %lu/%lu\n",
+		dev->stats.write.bytes, dev->stats.write.ops,
+		dev->stats.read.bytes, dev->stats.read.ops);
+
+	for (i = 1; i < UDC_EP_NUM; i++) {
+		if (dev->ep [i].desc == 0)
+			continue;
+		DMSG ("udccs%d = %02x\n", i, *dev->ep->reg_udccsr);
+	}
+}
+
+#if 0
+static void dump_regs(u8 ep)
+{
+	DMSG("EP:%d UDCCSR:0x%08x UDCBCR:0x%08x\n UDCCR:0x%08x\n",
+		ep,UDCCSN(ep), UDCBCN(ep), UDCCN(ep));
+}
+static void dump_req (struct pxa27x_request *req)
+{
+	struct usb_request *r = &req->req;
+
+	DMSG("%s: buf:0x%08x length:%d dma:0x%08x actual:%d\n",
+			__FUNCTION__, (unsigned)r->buf, r->length, 
+			r->dma,	r->actual);
+}
+#endif
+
+#else
+
+#define DMSG(stuff...)		do{}while(0)
+
+#define	dump_udccr(x)	do{}while(0)
+#define	dump_udccsr0(x)	do{}while(0)
+#define	dump_state(x)	do{}while(0)
+
+#define UDC_DEBUG ((unsigned)0)
+
+#endif
+
+#define DBG(lvl, stuff...) do{if ((lvl) <= UDC_DEBUG) DMSG(stuff);}while(0)
+
+#define WARN(stuff...) printk(KERN_WARNING "udc: " stuff)
+#define INFO(stuff...) printk(KERN_INFO "udc: " stuff)
+
+
+#endif /* __LINUX_USB_GADGET_PXA27X_H */