qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-18 09:49:22 +02:00
Code
575b583b39
openwrt-xburst/target/linux/brcm63xx/image/Makefile

266 lines
10 KiB
Makefile
Raw Normal View History

credit where credit is due git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-27 03:35:46 +03:00
#
[brcm63xx] Generate images for RTA1320_16M-based routers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 17:31:36 +03:00
# Copyright (C) 2006-2011 OpenWrt.org
credit where credit is due git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4091 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-27 03:35:46 +03:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-26 14:45:23 +03:00
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
bcm963xx: fix load address / kernel entry Current kernels have the same kernel entry as load address, so just set them like this. Also, the BCM963xx uses 0x80010000 as its load address, so use this too. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11169 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:29:39 +03:00
LOADADDR = 0x80010000 # RAM start + 16M
KERNEL_ENTRY = $(LOADADDR) # Newer kernels add a jmp to the kernel_entry at the start of the binary
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-26 14:45:23 +03:00
RAMSIZE = 0x01000000 # 64MB
LOADER_MAKEOPTS= \
KDIR=$(KDIR) \
LOADADDR=$(LOADADDR) \
KERNEL_ENTRY=$(KERNEL_ENTRY) \
RAMSIZE=$(RAMSIZE)
Major cleanup : - no more Broadcom kerSys* code - working runtime boot loader detection - updated flash map driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-08 20:20:01 +03:00
define trxalign/jffs2-128k
-a 0x20000
endef
define trxalign/jffs2-64k
-a 0x10000
endef
define trxalign/squashfs
-a 1024
endef
[brcm63xx] image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 22:17:08 +02:00
define Image/LimitName16
[brcm63xx] image Makefile: Corrected router imagename length limiting. Thanks KanjiMonster for reminding me. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24191 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-29 00:13:00 +02:00
$(shell expr substr "$(1)" 1 16)
[brcm63xx] image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 22:17:08 +02:00
endef
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:30:04 +03:00
define Image/Build/CFE
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
--output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin \
--boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
--load-addr $(LOADADDR) --rsa-signature "$(5)" \
bcm63xx: Add board id override fixup. Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-29 00:04:40 +02:00
--info1 "-$(call Image/LimitName16,$(4))" --info2 $(1) \
$(6) $(7) $(8) $(9)
endef
define Image/Build/CFEFIXUP
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
bcm63xx: Decouple Board ID and image name for fixup Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 16:33:41 +03:00
--output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
--boardid $(2) --chipid $(4) --entry $(KERNEL_ENTRY) \
--load-addr $(LOADADDR) --rsa-signature "$(6)" \
--info1 "+$(call Image/LimitName16,$(3))" --info2 $(1) \
$(7) $(8) $(9) $(10)
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:30:04 +03:00
endef
[brcm63xx] add support for HW553 bcm6358-based boards (#8844) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19 17:44:06 +02:00
define Image/Build/CFEHW553
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
--output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
--boardid $(2) --chipid $(3) --entry $(LOADADDR) \
--load-addr $(LOADADDR) --tag-version 7 \
--block-size 0x20000 --image-offset $(4)
endef
[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-12 10:54:04 +02:00
define Image/Build/CFEAGPF
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
--output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
--boardid $(2) --chipid $(3) --entry $(LOADADDR) \
--load-addr $(LOADADDR) --tag-version 8 \
--signature2 IMAGE --block-size 0x20000 \
bcm63xx: Add board id override fixup. Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-29 00:04:40 +02:00
--image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-12 10:54:04 +02:00
endef
[brcm63xx] build images for RG100A (bcm6358-based boards) (#6755) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 13:09:39 +02:00
define Image/Build/RG100A
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
--output $(BIN_DIR)/openwrt-$(5)-$(1)-cfe.bin \
--boardid $(2) --chipid $(3) --entry $(LOADADDR) \
--load-addr $(LOADADDR) --block-size 0x20000 \
bcm63xx: Add board id override fixup. Add a fixup for the kernel to check the bcm tag of the image for a boardid in the information1 field, and use that instead of the supplied one by cfe. This is triggered by a + at the start of the information1 field. Also modify the image generation to generate apropriately tagged images. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24189 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-29 00:04:40 +02:00
--image-offset $(4) --info1 "-$(call Image/LimitName16,$(5))" --info2 $(1)
[brcm63xx] build images for RG100A (bcm6358-based boards) (#6755) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 13:09:39 +02:00
endef
Build images for Inventel Livebox git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-12 17:16:57 +02:00
define Image/Build/RedBoot
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/openwrt-$(1)-vmlinux.elf
gzip -9 -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz
$(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.bin.l7
dd if=$(KDIR)/vmlinux.bin.l7 of=$(BIN_DIR)/openwrt-$(1)-vmlinux.lzma bs=65536 conv=sync
dd if=$(KDIR)/vmlinux.bin.gz of=$(BIN_DIR)/openwrt-$(1)-vmlinux.gz bs=65536 conv=sync
endef
bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 16:34:14 +03:00
define Image/Build/SPW303V
# Generate the tagged image
$(STAGING_DIR_HOST)/bin/imagetag -i $(KDIR)/vmlinux.lzma.cfe -f $(KDIR)/root.$(1) \
--output $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
--boardid $(2) --chipid $(3) --entry $(KERNEL_ENTRY) \
--load-addr $(LOADADDR) --rsa-signature "$(5)" \
bcm63xx: pad Speedport W303 V images to 4 MiB Prevents CFE from flashing to the second image offset. Fix up the rootfs length on first boot else CFE will complain. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:22:22 +03:00
--pad 4 $(6) $(7) $(8) $(9)
bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 16:34:14 +03:00
# Fix up header
$(STAGING_DIR_HOST)/bin/spw303v -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp \
-o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin
$(STAGING_DIR_HOST)/bin/xorimage -i $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-sysupgrade.bin \
-o $(BIN_DIR)/openwrt-$(4)-$(1)-cfe-factory.bin
rm -f $(BIN_DIR)/openwrt-$(4)-$(1)-cfe.bin.tmp
endef
[brcm63xx] generate images for old CFE based boards like the Davolink DV201 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-29 16:56:45 +02:00
define Image/Build/CFEOLD
$(TOPDIR)/scripts/brcmImage.pl -t -p \
-b $(2) -c $(3) \
-k $(KDIR)/vmlinux.lzma.cfe \
-r $(KDIR)/root.$(1) \
-o $(BIN_DIR)/openwrt-$(2)-$(1)-cfe.bin
endef
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-26 14:45:23 +03:00
define Build/Clean
Major cleanup : - no more Broadcom kerSys* code - working runtime boot loader detection - updated flash map driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-08 20:20:01 +03:00
$(MAKE) -C lzma-loader clean
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-26 14:45:23 +03:00
endef
define Image/Prepare
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:30:04 +03:00
# Standard LZMA kernel
build system cleanup/restructuring as described in http://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8362 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-08-07 03:04:25 +03:00
cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:30:04 +03:00
# CFE is a LZMA nazi! It took me hours to find out the parameters!
# Also I think lzma has a bug cause it generates different output depending on
# if you use stdin / stdout or not. Use files instead of stdio here, cause
# otherwise CFE will complain and not boot the image.
$(STAGING_DIR_HOST)/bin/lzma e -d22 -fb64 -a1 $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma.tmp
# Strip out the length, CFE doesn't like this
dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe bs=5 count=1
dd if=$(KDIR)/vmlinux.lzma.tmp of=$(KDIR)/vmlinux.lzma.cfe ibs=13 obs=5 skip=1 seek=1 conv=notrunc
rm -f $(KDIR)/vmlinux.lzma.tmp
# Build the LZMA loader
Major cleanup : - no more Broadcom kerSys* code - working runtime boot loader detection - updated flash map driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-08 20:20:01 +03:00
rm -f $(KDIR)/loader.gz
$(MAKE) -C lzma-loader \
BUILD_DIR="$(KDIR)" \
TARGET="$(KDIR)" \
clean install
bcm963xx: image generation using image tagger This adds CFE tagged image generation in the BCM963xx target image Makefile. It has to generate its own LZMA compressed kernel because CFE is a LZMA nazi. It also seems that the Broadcom image tagger as well as CFE use AdvanceCOMP, which is based on a slightly older LZMA SDK. Anyways, some of the code is GPL, some of it is LGPL, so it might be that Broadcom owes some sources. Also, LZMA has a bug which causes it to generate different output when you are using stdin / stdout compared to plain files. I've just worked around the issue by using plain files. Signed-off-by: Axel Gembe <ago@bastart.eu.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11171 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-05-18 20:30:04 +03:00
Major cleanup : - no more Broadcom kerSys* code - working runtime boot loader detection - updated flash map driver git-svn-id: svn://svn.openwrt.org/openwrt/trunk@6896 3c298f89-4303-0410-b956-a3cf2f4a3e73
2007-04-08 20:20:01 +03:00
echo -ne "\\x00" >> $(KDIR)/loader.gz
brcm63xx image generation cleanups (#3169) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10703 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-04-02 00:10:47 +03:00
rm -f $(KDIR)/fs_mark
touch $(KDIR)/fs_mark
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-26 14:45:23 +03:00
endef
define Image/Build
define a shared IMG_PREFIX variable used as a basename for image files, it contains board & subtarget infos (if appropriate) allowing subtargets to share the same bin directory without overwriting each other's files git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20834 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-13 02:15:56 +03:00
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
[brcm63xx] rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 11:04:52 +03:00
# Various routers
bcm63xx: build images for 6328 reference boards with various flash sizes Build images for 96328avng and 963281TAN (untested) for three different flash sizes: 4MB, 8MB, and 16MB. Known issues: * Button setup unknown, thus no fail-safe available. * All other BCM6328 and BCM63XX issues git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32004 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-30 13:27:46 +03:00
$(call Image/Build/CFE,$(1),96328avng,6328,96328avng-4M-flash-generic,,--pad 2)
$(call Image/Build/CFE,$(1),96328avng,6328,96328avng-8M-flash-generic,,--pad 4)
$(call Image/Build/CFE,$(1),96328avng,6328,96328avng-16M-flash-generic,,--pad 8)
[bcm63xx] add support for Comtrend AR5381u. Router: Comtrend AR5381u. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33895 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23 13:57:47 +03:00
$(call Image/Build/CFE,$(1),96328A-1241N,6328,96328A-1241N-generic,,--pad 8)
[bcm63xx] add support for Comtrend AR5387un. Router: Comtrend AR5387un. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23 13:57:44 +03:00
$(call Image/Build/CFE,$(1),96328A-1441N1,6328,96328A-1441N1-generic,,--pad 8)
bcm63xx: fix 963281TAN image names it's a 6328, not a 6348. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33665 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-08 16:08:40 +03:00
$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-4M-flash-generic,,--pad 2)
$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-8M-flash-generic,,--pad 4)
$(call Image/Build/CFE,$(1),963281TAN,6328,963281TAN-16M-flash-generic,,--pad 8)
[bcm63xx] add support for HomeStation ADB P.DG A4001N. Router: HomeStation ADB P.DG A4001N. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> [jogo: fix subject, indentation in patch] Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33893 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-23 13:57:39 +03:00
$(call Image/Build/CFE,$(1),963281T_TEF,6328,963281T_TEF-generic,,--pad 8)
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFE,$(1),96345GW2,6345,96345GW2-generic)
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),96345GW2,6345,96348GW2-bc221,,--layoutver 5)
[brcm63xx] image: Limited image name put into the info1 field to 16 characters and eliminted the OpenWRT revision. This makes using the image (router) name as the board name possible, so that boards with same real boardid but different GPIOs can be detected and the correct GPIOs used. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24118 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-23 22:17:08 +02:00
$(call Image/Build/CFE,$(1),96345GW2,6345,92345GW2-rev,OpenWRT-$(REVISION))
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFE,$(1),96348GW,6348,96348GW-generic,,)
[brcm63xx] build 96348R images git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29960 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-01-30 23:12:32 +02:00
$(call Image/Build/CFE,$(1),96348R,6348,96348R-generic,,)
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),96348GW,6348,96348GW-bc221,,--layoutver 5)
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFE,$(1),6338GW,6338,6338GW-generic,,)
$(call Image/Build/CFE,$(1),6338W,6338,6338W-generic,,)
[brcm63xx] rename 96348GW-1{0,1}-gen to 96348GW-1{0,1}-generic git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30822 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 16:49:34 +02:00
$(call Image/Build/CFE,$(1),96348GW-11,6348,96348GW-11-generic)
$(call Image/Build/CFE,$(1),96348GW-10,6348,96348GW-10-generic)
bcm63xx: 96348A-122 improvements (Comtrend 5365) 1) Improve WLAN button. 2) Add 96348A-122 image. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32593 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-04 00:42:15 +03:00
$(call Image/Build/CFE,$(1),96348A-122,6348,96348A-122-generic)
[brcm63xx] generate generic images for BCM96358VW and BCM96358VW2 (#10666) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30821 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-05 16:49:31 +02:00
$(call Image/Build/CFE,$(1),96358VW,6358,96358VW-generic)
$(call Image/Build/CFE,$(1),96358VW2,6358,96358VW2-generic)
bcm63xx: drop linux 3.2 support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31464 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-04-24 14:49:27 +03:00
$(call Image/Build/CFE,$(1),96368MVNgr,6368,96368MVNgr-generic)
$(call Image/Build/CFE,$(1),96368MVWG,6368,96368MVWG-generic)
bcm63xx: enable bcm6368 for linux 3.3 and build images Only build bcm6368 images when building for linux 3.3. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31133 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-03-28 23:42:37 +03:00
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# BT Voyager V210_BTR
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),V210_BB,6348,BTV210_BTR,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# BT Voyager V210_ROI, V210_WB
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),V210,6348,BTV210_ROI_WB,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# BT Voyager V2091_BTR
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),V2091_BB,6348,BTV2091_BTR,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# BT Voyager V2091_ROI, V2091_WB
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),V2091,6348,BTV2091_ROI_WB,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# BT Voyager V220V, V220V_MGCP_BTR
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),RTA1052V,6348,BTV220V_MGCP_BTR,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# BT Voyager V2110, V2110_AA, V2110_ROI
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),V2110,6348,BTV2110,,--layoutver 5)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# BT Voyager V2500V, V2500V_SIP_CLUB, V2500V_AA
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),V2500V_BB,6348,BTV2500V,,--layoutver 5)
[brcm63xx] generate images for RTA1025W_16-based routers (#5594) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17058 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-07-31 13:47:00 +03:00
# RTA1025W_16 (numerous routers)
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
$(call Image/Build/CFE,$(1),RTA1025W_16,6348,RTA1025W_16,,--layoutver 5)
[brcm63xx] Generate images for RTA1320_16M-based routers git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26681 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-04-15 17:31:36 +03:00
# RTA1320_16M (numerous routers)
$(call Image/Build/CFE,$(1),RTA1320_16M,6338,RTA1320_16M,,--layoutver 5)
[brcm63xx] rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 11:04:52 +03:00
# Tecom GW6000
bcm63xx: Decouple Board ID and image name for fixup Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 16:33:41 +03:00
$(call Image/Build/CFEFIXUP,$(1),96348GW,GW6000,6348,GW6000)
[brcm63xx] rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 11:04:52 +03:00
# Tecom GW6200
bcm63xx: Decouple Board ID and image name for fixup Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 16:33:41 +03:00
$(call Image/Build/CFEFIXUP,$(1),96348GW,GW6200,6348,GW6200,$(shell printf '\x99'))
Add definitions for bcm96350vw, add back bcm63xx mtd driver, be careful when testing with 8MB devices git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13015 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-10-20 15:55:28 +03:00
# Neufbox4
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFE,$(1),96358VW,6358,NEUFBOX4,OpenWRT-$(REVISION))
bcm63xx: Add nb6 support (BCM6362 SoC base boards) Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com> Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> [jonas.gorski@gmail.com: add network config for nb6, make switch fix a platform patch] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32924 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-31 17:27:47 +03:00
# Neufbox6
$(call Image/Build/CFE,$(1),NB6-SER-r0,6362,NEUFBOX6,OpenWRT-$(REVISION))
[brcm63xx] Add CT6376-1 board support Added CT6373 devices instead of using NB4's devices, as Florian suggested. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32892 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27 18:35:05 +03:00
# Comtrend 6373
$(call Image/Build/CFE,$(1),CT6373-1,6358,CT6373)
[brcm63xx] rework imagetag firmware generator and MTD partition parser to accomodate with all known imagetag versions from Broadcom and vendors, patch from Daniel Dickinson (fixes #4987). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16393 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-09 11:04:52 +03:00
# Comtrend 536, 5621
bcm63xx: Decouple Board ID and image name for fixup Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 16:33:41 +03:00
$(call Image/Build/CFEFIXUP,$(1),96348GW-11,CT536_CT5621,6348,CT536_CT5621)
[brcm63xx] generate images for old CFE based boards like the Davolink DV201 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14264 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-29 16:56:45 +02:00
# Davolink DV201AMR
$(call Image/Build/CFEOLD,$(1),DV201AMR,6348)
[brcm63xx] add support for user9102 boards (#4537) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14305 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-01-31 18:01:20 +02:00
# USR 9108
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFE,$(1),96348GW-A,6348,USR9108)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# NetGear DG834GT, DG834PN
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFE,$(1),96348GW-10,6348,DG834GT_DG834PN)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# Belkin f5d7633
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFE,$(1),96348GW-10,6348,F5D7633)
[brcm63xx] add support for DSL-2640B rev B2 Signed-off-by: Adrian Feliks <mexit@o2.pl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26958 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 13:06:22 +03:00
# D-Link DSL-2640B, rev B2
$(call Image/Build/CFE,$(1),D-4P-W,6348,DSL2640B-B2)
[brcm63xx] build images for D-Link DSL-2650U (#9003) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29238 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-18 12:37:03 +02:00
# D-Link DSL-2650U
[brcm63xx] fix D-Link DSL-2650U image generation git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29266 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-19 23:34:51 +02:00
$(call Image/Build/CFE,$(1),96358VW2,6358,DSL2650U)
bcm63xx: Finalize support for DSL-274xB, rev C2. The DSL-2740B/DSL-2741B rev C2 support was missing the board definition, resulting in a kernel panic on boot. This patch adds it, and also renames the generated image name to properly reflect that it is for the revision C2, and for both the DSL-2740B and DSL-2741B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24188 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-29 00:04:36 +02:00
# D-Link DSL-2740B/DSL-2741B, rev C2
bcm63xx: Update support for the DSL-274xB revision C Rename the DSL-274xB rev C2's board ID to "AW4139" to match the one used for the rev C3 (same hardware) and add a fixup for C2. Also generate images for C3. While we are at it, rename the LEDs to conform to the Linux LED naming conventions. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26876 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 16:33:50 +03:00
$(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2)
# D-Link DSL-2740B/DSL-2741B, rev C3
$(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3)
bcm63xx: build images for DSL-274XB revision F1 Build images for D-Link DSL-274XB revision F1. Flashing through original web UI as well as CFE works. Known issues: * wifi led inverted (on when wifi is off and vice cersa) * same issues as generic bcm6328 support git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31885 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-27 16:22:51 +03:00
# D-Link DSL-2740B/DSL-2741B, rev F1
$(call Image/Build/CFE,$(1),AW4339U,6328,DSL274XB-F1-EU,,--signature2="4.06.01.EUF1" --pad 4)
$(call Image/Build/CFE,$(1),AW4339U,6328,DSL274XB-F1-AU,,--signature2="4.06.01.AUF1" --pad 4)
[brcm63xx] add support for D-Link DVA-G3810BN/TL This patch adds support for D-Link's DVA-G3810BN/TL product. Signed-off-by: Roman Dumycz <roman@secureas.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-20 13:06:15 +03:00
# D-Link DVA-G3810BN/TL
[brcm63xx] fix DVA-G3810BN image generation Attached patch fixes a typo in the image Makefile, and overrides the board name for DVA-G3810BN to set the correct board properties Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-07-27 18:35:12 +03:00
$(call Image/Build/CFEFIXUP,$(1),96358VW,DVAG3810BN,6358,DVAG3810BN)
The attached patch adds building of firmware images for more routers based on the brcm63xx chipset. Signed-Off By: Daniel Dickinson <crazycshore@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16396 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-10 11:24:13 +03:00
# TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)
# TP-Link 8900GB
$(call Image/Build/CFE,$(1),96348GW-11,6348,TD8900GB,$(shell printf 'PRID\x89\x10\x00\x02'))
[brcm63xx] generate experimental images for bcm6338 boards, thanks to Daniel Dickinson git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16490 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-06-17 16:16:59 +03:00
Add support for Sagem F@ST2404 (#4332) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13583 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-10 18:13:41 +02:00
# Sagem F@ST2404
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404-cfe)
$(call Image/Build/CFE,$(1),F@ST2404,6348,F@ST2404,OpenWRT-$(REVISION))
[bcm63xx] Add F@ST2604 board support. Add Sagem F@ST2604 board support. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33886 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-21 17:35:06 +03:00
# Sagem F@ST2604
$(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604-cfe)
$(call Image/Build/CFE,$(1),F@ST2604,6348,F@ST2604,OpenWRT-$(REVISION))
Build images for Inventel Livebox git-svn-id: svn://svn.openwrt.org/openwrt/trunk@13616 3c298f89-4303-0410-b956-a3cf2f4a3e73
2008-12-12 17:16:57 +02:00
# Inventel Livebox
$(call Image/Build/RedBoot,livebox)
[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate VoIP 2 Plus Wi-Fi) #4366 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14850 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-03-12 10:54:04 +02:00
# Pirelli Alice Gate VoIP 2 Plus Wi-Fi AGPF-S0
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W-cfe)
$(call Image/Build/CFEAGPF,$(1),AGPF-S0,6358,0x20000,AGV2+W)
[brcm63xx] add support for the Pirelli AG226G board (#5337) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@17190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2009-08-09 13:19:47 +03:00
# Pirelli A226G
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G-cfe)
$(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x10000,A226G)
[tools/firmware-utils] imagetag: Significantly updated brcm63xx imagetag writing tool. * Rewrote commandline parsing code using gengetopt - We now get long options - We have more options including use of the info section for board information (e.g. to add the same boardid but different GPIOs on different routers) * Added back the ability to write stock images (this is useful, for example, when copying the firmware from the in-memory flash, and then being able to create an image that will let you revert to/test stock firmware * Fixed copying of CRCs to use memcpy instead of strncpy (strncpy stops at 0) * Added ability to use all sections of the imagetag, including custom magic signatures (e.g. for the Telsey router I'm adding soon), info sections, and reserved sections * Added putting the router type (as defined in the image generating Makefile) into the info1 section and the filesystem type in the info2 section. This will be used by mtd (when I add the code) to return the name of image used to flash this router. (As requested by Jo, as well as being useful for same boardid different board scenario described above). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24011 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-16 08:46:53 +02:00
[brcm63xx] build images for Pirelli A226M (#10409) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29045 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-11-13 21:19:22 +02:00
# Pirelli A226M
$(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M-cfe)
$(call Image/Build/CFEAGPF,$(1),DWV-S0,6358,0x20000,A226M)
[brcm63xx] build images for RG100A (bcm6358-based boards) (#6755) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 13:09:39 +02:00
# RG100A,DB120 etc.
[brcm63xx] flashmap and image generation: reduced union bcm_tag to a single struct combining the elements so that it is no longer necessary to create an openwrt-only tagid and tagcrc, and elimate the tagid detection and switch statements which made dealing with imagetags overly complicated, especially since the logic would need analogs in all code that touched the imagetag. Patch from cshore. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20652 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-02 00:20:43 +03:00
$(call Image/Build/RG100A,$(1),96358VW2,6358,0x20000,RG100A_DB120)
[brcm63xx] build images for RG100A (bcm6358-based boards) (#6755) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19894 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-02-28 13:09:39 +02:00
[brcm63xx] Initial support for Telsey CPVA642 boards (no vlans, no DSL, GPIO led/buttons not known). git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24040 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-19 15:41:54 +02:00
# Telsey CPVA642-type (e.g. CPA-ZNTE60T)
$(call Image/Build/CFE,$(1),CPVA642,6358,CPA-ZNTE60T,,--signature "Telsey Tlc",--signature2 "99.99.999",--second-image-flag "0")
bcm63xx: Add support for the T-Com Speedport W 500V. Add support for the T-Com Speedport W 500V using a special tagged image as it identifies itself as a 96348GW, but has some gpios wired differently, and also has only one ethernet port without a switch attached to it. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24190 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-11-29 00:04:44 +02:00
# T-Com Speedport W 500V
bcm63xx: Decouple Board ID and image name for fixup Make the fixup board ID independent from the image name to allow using the same board ID for similar devices. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26874 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 16:33:41 +03:00
$(call Image/Build/CFEFIXUP,$(1),96348GW,SPW500V,6348,SPW500V)
[brcm63xx] add support for HW553 bcm6358-based boards (#8844) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25590 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-02-19 17:44:06 +02:00
#HW553
$(call Image/Build/CFEHW553,$(1),HW553,6358,0x20000,HW553)
bcm63xx: Add support for the T-Home Speedport W 303V Add the required board definition, default config and image generation for the T-Home Speedport W 303V Typ B. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26878 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-05-11 16:34:14 +03:00
# T-Com Speedport W 303V Typ B
$(call Image/Build/SPW303V,$(1),96358-502V,6358,SPW303V)
Merge premilinary Broadcom 63xx support (Livebox, Siemens SE515...) Kernel compiles fine, does not include linux-2.6.8.1 linux-mips specific fixes and neither includes broadcom changes to netfiler Needs testing of course :) git-svn-id: svn://svn.openwrt.org/openwrt/branches/buildroot-ng/openwrt@4084 3c298f89-4303-0410-b956-a3cf2f4a3e73
2006-06-26 14:45:23 +03:00
endef
$(eval $(call BuildImage))
Copy Permalink