openwrt-xburst/target/linux/s3c24xx/patches-2.6.24/1264-silence-serial-console-gta01.patch.patch

From bea12b6beb76a483145b07d30602b0dd18ff2484 Mon Sep 17 00:00:00 2001
From: Mike Westerhof <mwester@dls.net>
Date: Fri, 8 Aug 2008 13:10:18 +0100
Subject: [PATCH] silence-serial-console-gta01.patch

    This patch ensures that no console data will go the UART while
    the GSM mux is switched to the GSM.  This is necessary despite
    the code that disables the console due to the fact that the
    console resumes before the neo1973_pm_gsm driver, and consoles
    always resume in the "on" state.

Signed-off-by: Mike Westerhof <mwester@dls.net>
---
 arch/arm/plat-s3c24xx/neo1973_pm_gsm.c |    3 +++
 drivers/serial/s3c2410.c               |   10 ++++++++++
 2 files changed, 13 insertions(+), 0 deletions(-)

diff --git a/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c b/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
index 0543905..68b7111 100644
--- a/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
+++ b/arch/arm/plat-s3c24xx/neo1973_pm_gsm.c
@@ -31,6 +31,7 @@
 #include <asm/arch/regs-gpioj.h>
 #endif
 
+extern void s3c24xx_serial_console_set_silence(int silence);
 extern void s3c24xx_serial_register_resume_dependency(struct resume_dependency *
 					     resume_dependency, int uart_index);
 
@@ -105,6 +106,7 @@ static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
 					 "disconnecting serial console\n");
 
 				console_stop(gta01_gsm.con);
+				s3c24xx_serial_console_set_silence(1);
 			}
 
 			if (gta01_gsm.gpio_ngsm_en)
@@ -144,6 +146,7 @@ static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
 				s3c2410_gpio_setpin(gta01_gsm.gpio_ngsm_en, 1);
 
 			if (gta01_gsm.con) {
+				s3c24xx_serial_console_set_silence(0);
 				console_start(gta01_gsm.con);
 
 				dev_dbg(dev, "powered down GSM, thus enabling "
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 5652905..2a388cf 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -1780,6 +1780,13 @@ module_exit(s3c24xx_serial_modexit);
 #ifdef CONFIG_SERIAL_S3C2410_CONSOLE
 
 static struct uart_port *cons_uart;
+static int cons_silenced;
+
+void s3c24xx_serial_console_set_silence(int silenced)
+{
+	cons_silenced = silenced;
+}
+EXPORT_SYMBOL(s3c24xx_serial_console_set_silence);
 
 static int
 s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
@@ -1806,6 +1813,9 @@ s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
 	unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
 	unsigned int umcon = rd_regl(cons_uart, S3C2410_UMCON);
 
+	if (cons_silenced)
+		return;
+
 	/* If auto HW flow control enabled, temporarily turn it off */
 	if (umcon & S3C2410_UMCOM_AFC)
 		wr_regl(port, S3C2410_UMCON, (umcon & !S3C2410_UMCOM_AFC));
-- 
1.5.6.5