qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-25 17:21:53 +02:00
Code
5b983412c7
openwrt-xburst/target/linux/xburst/files-2.6.27/include/asm-mips/mach-jz4760/regs.h

3748 lines
171 KiB
C
Raw Normal View History

yet another patchset - 2.6.27 it's basically also provided by ingenic and nativly based on 2.6.27, adjusted to fit into the OpenWrt-environment
2009-08-18 13:44:38 +03:00
/*
* linux/include/asm-mips/mach-jz4760/regs.h
*
* JZ4760 register definition.
*
* Copyright (C) 2008 Ingenic Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __JZ4760_REGS_H__
#define __JZ4760_REGS_H__
#if defined(__ASSEMBLY__) || defined(__LANGUAGE_ASSEMBLY)
#define REG8(addr) (addr)
#define REG16(addr) (addr)
#define REG32(addr) (addr)
#else
#define REG8(addr) *((volatile unsigned char *)(addr))
#define REG16(addr) *((volatile unsigned short *)(addr))
#define REG32(addr) *((volatile unsigned int *)(addr))
#endif
/*
* Define the module base addresses
*/
/* AHB0 BUS Devices Base */
#define HARB0_BASE 0xB3000000
#define EMC_BASE 0xB3010000
#define DDRC_BASE 0xB3020000
#define MCDMAC_BASE 0xB3030000
#define LCD_BASE 0xB3050000
#define TVE_BASE 0xB3050000
#define SLCD_BASE 0xB3050000
#define CIM_BASE 0xB3060000
#define IPU_BASE 0xB3080000
/* AHB1 BUS Devices Base */
#define HARB1_BASE 0xB3200000
#define DMAGP0_BASE 0xB3210000
#define DMAGP1_BASE 0xB3220000
#define DMAGP2_BASE 0xB3230000
#define MC_BASE 0xB3250000
#define ME_BASE 0xB3260000
#define DEBLK_BASE 0xB3270000
#define IDCT_BASE 0xB3280000
#define CABAC_BASE 0xB3290000
#define TCSM0_BASE 0xB32B0000
#define TCSM1_BASE 0xB32C0000
#define SRAM_BASE 0xB32D0000
/* AHB2 BUS Devices Base */
#define HARB2_BASE 0xB3400000
#define NEMC_BASE 0xB3410000
#define DMAC_BASE 0xB3420000
#define UHC_BASE 0xB3430000
#define UDC_BASE 0xB3440000
#define GPS_BASE 0xB3480000
#define ETHC_BASE 0xB34B0000
#define BCH_BASE 0xB34D0000
/* APB BUS Devices Base */
#define CPM_BASE 0xB0000000
#define INTC_BASE 0xB0001000
#define TCU_BASE 0xB0002000
#define OST_BASE 0xB0002000
#define WDT_BASE 0xB0002000
#define RTC_BASE 0xB0003000
#define GPIO_BASE 0xB0010000
#define AIC_BASE 0xB0020000
#define ICDC_BASE 0xB0020000
#define MSC0_BASE 0xB0021000
#define MSC1_BASE 0xB0022000
#define MSC2_BASE 0xB0023000
#define UART0_BASE 0xB0030000
#define UART1_BASE 0xB0031000
#define UART2_BASE 0xB0032000
#define UART3_BASE 0xB0033000
#define SCC_BASE 0xB0040000
#define SSI0_BASE 0xB0043000
#define SSI1_BASE 0xB0044000
#define SSI2_BASE 0xB0045000
#define I2C0_BASE 0xB0050000
#define I2C1_BASE 0xB0051000
#define PS2_BASE 0xB0060000
#define SADC_BASE 0xB0070000
#define OWI_BASE 0xB0072000
#define TSSI0_BASE 0xB0073000
/*************************************************************************
* INTC (Interrupt Controller)
*************************************************************************/
#define INTC_ISR (INTC_BASE + 0x00)
#define INTC_IMR (INTC_BASE + 0x04)
#define INTC_IMSR (INTC_BASE + 0x08)
#define INTC_IMCR (INTC_BASE + 0x0c)
#define INTC_IPR (INTC_BASE + 0x10)
#define INTC_ISSR (INTC_BASE + 0x18) /* Interrupt Controller Source Set Register */
#define INTC_ISCR (INTC_BASE + 0x1c) /* Interrupt Controller Source Clear Register */
#define REG_INTC_ISR REG32(INTC_ISR)
#define REG_INTC_IMR REG32(INTC_IMR)
#define REG_INTC_IMSR REG32(INTC_IMSR)
#define REG_INTC_IMCR REG32(INTC_IMCR)
#define REG_INTC_IPR REG32(INTC_IPR)
#define REG_INTC_ISSR REG32(INTC_ISSR)
#define REG_INTC_ISCR REG32(INTC_ISCR)
// 1st-level interrupts
#define IRQ_I2C1 0
#define IRQ_I2C0 1
#define IRQ_UART3 2
#define IRQ_UART2 3
#define IRQ_UART1 4
#define IRQ_UART0 5
#define IRQ_SSI2 6
#define IRQ_SSI1 7
#define IRQ_SSI0 8
#define IRQ_TSSI 9
#define IRQ_BCH 10
#define IRQ_KBC 11
#define IRQ_GPIO5 12
#define IRQ_GPIO4 13
#define IRQ_GPIO3 14
#define IRQ_GPIO2 15
#define IRQ_GPIO1 16
#define IRQ_GPIO0 17
#define IRQ_SADC 18
#define IRQ_ETH 19
#define IRQ_UHC 20
#define IRQ_OTG 21
#define IRQ_DMAC2 22
#define IRQ_DMAC1 23
#define IRQ_DMAC0 24
#define IRQ_TCU2 25
#define IRQ_TCU1 26
#define IRQ_TCU0 27
#define IRQ_GPS 28
#define IRQ_IPU 29
#define IRQ_CIM 30
#define IRQ_LCD 31
#define IRQ_RTC 32
#define IRQ_OWI 33
#define IRQ_AIC 34
#define IRQ_MSC1 35
#define IRQ_MSC0 36
#define IRQ_SSC 36
// 2nd-level interrupts
#define IRQ_DMA_0 32 /* 32 to 37 for DMAC channel 0 to 5 */
#define IRQ_GPIO_0 48 /* 48 to 175 for GPIO pin 0 to 127 */
#define NUM_DMA MAX_DMA_NUM /* 12 */
#define NUM_GPIO MAX_GPIO_NUM /* GPIO NUM: 192, Jz4760 real num GPIO 178 */
/*************************************************************************
* RTC
*************************************************************************/
#define RTC_RCR (RTC_BASE + 0x00) /* RTC Control Register */
#define RTC_RSR (RTC_BASE + 0x04) /* RTC Second Register */
#define RTC_RSAR (RTC_BASE + 0x08) /* RTC Second Alarm Register */
#define RTC_RGR (RTC_BASE + 0x0c) /* RTC Regulator Register */
#define RTC_HCR (RTC_BASE + 0x20) /* Hibernate Control Register */
#define RTC_HWFCR (RTC_BASE + 0x24) /* Hibernate Wakeup Filter Counter Reg */
#define RTC_HRCR (RTC_BASE + 0x28) /* Hibernate Reset Counter Register */
#define RTC_HWCR (RTC_BASE + 0x2c) /* Hibernate Wakeup Control Register */
#define RTC_HWRSR (RTC_BASE + 0x30) /* Hibernate Wakeup Status Register */
#define RTC_HSPR (RTC_BASE + 0x34) /* Hibernate Scratch Pattern Register */
#define REG_RTC_RCR REG32(RTC_RCR)
#define REG_RTC_RSR REG32(RTC_RSR)
#define REG_RTC_RSAR REG32(RTC_RSAR)
#define REG_RTC_RGR REG32(RTC_RGR)
#define REG_RTC_HCR REG32(RTC_HCR)
#define REG_RTC_HWFCR REG32(RTC_HWFCR)
#define REG_RTC_HRCR REG32(RTC_HRCR)
#define REG_RTC_HWCR REG32(RTC_HWCR)
#define REG_RTC_HWRSR REG32(RTC_HWRSR)
#define REG_RTC_HSPR REG32(RTC_HSPR)
/* RTC Control Register */
#define RTC_RCR_WRDY_BIT 7
#define RTC_RCR_WRDY (1 << 7) /* Write Ready Flag */
#define RTC_RCR_1HZ_BIT 6
#define RTC_RCR_1HZ (1 << RTC_RCR_1HZ_BIT) /* 1Hz Flag */
#define RTC_RCR_1HZIE (1 << 5) /* 1Hz Interrupt Enable */
#define RTC_RCR_AF_BIT 4
#define RTC_RCR_AF (1 << RTC_RCR_AF_BIT) /* Alarm Flag */
#define RTC_RCR_AIE (1 << 3) /* Alarm Interrupt Enable */
#define RTC_RCR_AE (1 << 2) /* Alarm Enable */
#define RTC_RCR_RTCE (1 << 0) /* RTC Enable */
/* RTC Regulator Register */
#define RTC_RGR_LOCK (1 << 31) /* Lock Bit */
#define RTC_RGR_ADJC_BIT 16
#define RTC_RGR_ADJC_MASK (0x3ff << RTC_RGR_ADJC_BIT)
#define RTC_RGR_NC1HZ_BIT 0
#define RTC_RGR_NC1HZ_MASK (0xffff << RTC_RGR_NC1HZ_BIT)
/* Hibernate Control Register */
#define RTC_HCR_PD (1 << 0) /* Power Down */
/* Hibernate Wakeup Filter Counter Register */
#define RTC_HWFCR_BIT 5
#define RTC_HWFCR_MASK (0x7ff << RTC_HWFCR_BIT)
/* Hibernate Reset Counter Register */
#define RTC_HRCR_BIT 5
#define RTC_HRCR_MASK (0x7f << RTC_HRCR_BIT)
/* Hibernate Wakeup Control Register */
#define RTC_HWCR_EALM (1 << 0) /* RTC alarm wakeup enable */
/* Hibernate Wakeup Status Register */
#define RTC_HWRSR_HR (1 << 5) /* Hibernate reset */
#define RTC_HWRSR_PPR (1 << 4) /* PPR reset */
#define RTC_HWRSR_PIN (1 << 1) /* Wakeup pin status bit */
#define RTC_HWRSR_ALM (1 << 0) /* RTC alarm status bit */
/*************************************************************************
* CPM (Clock reset and Power control Management)
*************************************************************************/
#define CPM_CPCCR (CPM_BASE+0x00)
#define CPM_CPPCR (CPM_BASE+0x10)
#define CPM_CPPSR (CPM_BASE+0x14) /* PLL Switch and Status Register */
#define CPM_I2SCDR (CPM_BASE+0x60)
#define CPM_LPCDR (CPM_BASE+0x64)
#define CPM_MSCCDR(n) (CPM_BASE+0x68) /* MSC0(n=0) or MSC1(n=1) device clock divider Register */
#define CPM_UHCCDR (CPM_BASE+0x6C)
#define CPM_SSICDR (CPM_BASE+0x74)
#define CPM_PCMCDR (CPM_BASE+0x7C) /* PCM device clock divider Register */
#define CPM_LCR (CPM_BASE+0x04)
#define CPM_CLKGR (CPM_BASE+0x20)
#define CPM_OPCR (CPM_BASE+0x24) /* Oscillator and Power Control Register */
#define CPM_RSR (CPM_BASE+0x08)
#define REG_CPM_CPCCR REG32(CPM_CPCCR)
#define REG_CPM_CPPCR REG32(CPM_CPPCR)
#define REG_CPM_CPPSR REG32(CPM_CPPSR)
#define REG_CPM_I2SCDR REG32(CPM_I2SCDR)
#define REG_CPM_LPCDR REG32(CPM_LPCDR)
#define REG_CPM_MSCCDR(n) REG32(CPM_MSCCDR(n))
#define REG_CPM_UHCCDR REG32(CPM_UHCCDR)
#define REG_CPM_SSICDR REG32(CPM_SSICDR)
#define REG_CPM_PCMCDR REG32(CPM_PCMCDR)
#define REG_CPM_LCR REG32(CPM_LCR)
#define REG_CPM_CLKGR REG32(CPM_CLKGR)
#define REG_CPM_OPCR REG32(CPM_OPCR)
#define REG_CPM_RSR REG32(CPM_RSR)
/* Clock Control Register */
#define CPM_CPCCR_I2CS (1 << 31)
#define CPM_CPCCR_ECS (1 << 30) /* Select the between EXCLK and EXCLK/2 output */
#define CPM_CPCCR_UCS (1 << 29)
#define CPM_CPCCR_UDIV_BIT 23
#define CPM_CPCCR_UDIV_MASK (0x3f << CPM_CPCCR_UDIV_BIT)
#define CPM_CPCCR_CE (1 << 22)
#define CPM_CPCCR_PCS (1 << 21)
#define CPM_CPCCR_H1DIV_BIT 16
#define CPM_CPCCR_H1DIV_MASK (0x1f << CPM_CPCCR_H1DIV_BIT)
#define CPM_CPCCR_MDIV_BIT 12
#define CPM_CPCCR_MDIV_MASK (0x0f << CPM_CPCCR_MDIV_BIT)
#define CPM_CPCCR_PDIV_BIT 8
#define CPM_CPCCR_PDIV_MASK (0x0f << CPM_CPCCR_PDIV_BIT)
#define CPM_CPCCR_HDIV_BIT 4
#define CPM_CPCCR_HDIV_MASK (0x0f << CPM_CPCCR_HDIV_BIT)
#define CPM_CPCCR_CDIV_BIT 0
#define CPM_CPCCR_CDIV_MASK (0x0f << CPM_CPCCR_CDIV_BIT)
/* PLL Switch and Status Register */
#define CPM_CPPSR_PLLOFF (1<<31)
#define CPM_CPPSR_PLLBP (1<<30)
#define CPM_CPPSR_PLLON (1<<29)
#define CPM_CPPSR_PS (1<<28) /* Indicate whether the PLL parameters' change has finished */
#define CPM_CPPSR_FS (1<<27) /* Indicate whether the main clock's change has finished */
#define CPM_CPPSR_CS (1<<26) /* Indicate whether the clock switch has finished */
#define CPM_CPPSR_PM (1<<1) /* Clock switch mode */
#define CPM_CPPSR_FM (1<<0) /* Clock frequency change mode */
/* I2S Clock Divider Register */
#define CPM_I2SCDR_I2SDIV_BIT 0
#define CPM_I2SCDR_I2SDIV_MASK (0x1ff << CPM_I2SCDR_I2SDIV_BIT)
/* LCD Pixel Clock Divider Register */
#define CPM_LPCDR_PIXDIV_BIT 0
#define CPM_LPCDR_PIXDIV_MASK (0x7ff << CPM_LPCDR_PIXDIV_BIT)
/* MSC Clock Divider Register */
#define CPM_MSCCDR_MSCDIV_BIT 0
#define CPM_MSCCDR_MSCDIV_MASK (0x1f << CPM_MSCCDR_MSCDIV_BIT)
/* SSI Clock Divider Register */
#define CPM_SSICDR_SSIDIV_BIT 0
#define CPM_SSICDR_SSIDIV_MASK (0xf << CPM_SSICDR_SSIDIV_BIT)
/* PCM device clock divider Register */
#define CPM_PCMCDR_PCMS 31 /* PCM source clock Selection */
#define CPM_PCMCDR_PCMCD_BIT 0
#define CPM_PCMCDR_PCMCD_MASK (0x1ff << CPM_PCMCDR_PCMCD_BIT)
/* PLL Control Register */
#define CPM_CPPCR_PLLM_BIT 23
#define CPM_CPPCR_PLLM_MASK (0x1ff << CPM_CPPCR_PLLM_BIT)
#define CPM_CPPCR_PLLN_BIT 18
#define CPM_CPPCR_PLLN_MASK (0x1f << CPM_CPPCR_PLLN_BIT)
#define CPM_CPPCR_PLLOD_BIT 16
#define CPM_CPPCR_PLLOD_MASK (0x03 << CPM_CPPCR_PLLOD_BIT)
#define CPM_CPPCR_PLLS (1 << 10) /* obsolete, replaced by CPM_CPPSR_PLLON */
#define CPM_CPPCR_PLLBP (1 << 9)
#define CPM_CPPCR_PLLEN (1 << 8)
#define CPM_CPPCR_PLLST_BIT 0
#define CPM_CPPCR_PLLST_MASK (0xff << CPM_CPPCR_PLLST_BIT)
/* Low Power Control Register */
#define CPM_LCR_DOZE_DUTY_BIT 3
#define CPM_LCR_DOZE_DUTY_MASK (0x1f << CPM_LCR_DOZE_DUTY_BIT)
#define CPM_LCR_DOZE_ON (1 << 2)
#define CPM_LCR_LPM_BIT 0
#define CPM_LCR_LPM_MASK (0x3 << CPM_LCR_LPM_BIT)
#define CPM_LCR_LPM_IDLE (0x0 << CPM_LCR_LPM_BIT)
#define CPM_LCR_LPM_SLEEP (0x1 << CPM_LCR_LPM_BIT)
/* Clock Gate Register */
#define CPM_CLKGR_AUX_CPU (1 << 24)
#define CPM_CLKGR_AHB1 (1 << 23)
#define CPM_CLKGR_IDCT (1 << 22)
#define CPM_CLKGR_DB (1 << 21)
#define CPM_CLKGR_ME (1 << 20)
#define CPM_CLKGR_MC (1 << 19)
#define CPM_CLKGR_TVE (1 << 18)
#define CPM_CLKGR_TSSI (1 << 17)
#define CPM_CLKGR_MSC1 (1 << 16)
#define CPM_CLKGR_UART2 (1 << 15)
#define CPM_CLKGR_UART1 (1 << 14)
#define CPM_CLKGR_IPU (1 << 13)
#define CPM_CLKGR_DMAC (1 << 12)
#define CPM_CLKGR_BCH (1 << 11)
#define CPM_CLKGR_UDC (1 << 10)
#define CPM_CLKGR_LCD (1 << 9)
#define CPM_CLKGR_CIM (1 << 8)
#define CPM_CLKGR_SADC (1 << 7)
#define CPM_CLKGR_MSC0 (1 << 6)
#define CPM_CLKGR_AIC (1 << 5)
#define CPM_CLKGR_SSI (1 << 4)
#define CPM_CLKGR_I2C (1 << 3)
#define CPM_CLKGR_RTC (1 << 2)
#define CPM_CLKGR_TCU (1 << 1)
#define CPM_CLKGR_UART0 (1 << 0)
/* Oscillator and Power Control Register */
#define CPM_OPCR_O1ST_BIT 8
#define CPM_OPCR_O1ST_MASK (0xff << CPM_SCR_O1ST_BIT)
#define CPM_OPCR_UHCPHY_DISABLE (1 << 7)
#define CPM_OPCR_UDCPHY_ENABLE (1 << 6)
#define CPM_OPCR_OSC_ENABLE (1 << 4)
#define CPM_OPCR_ERCS (1 << 2) /* EXCLK/512 clock and RTCLK clock selection */
#define CPM_OPCR_MOSE (1 << 1) /* Main Oscillator Enable */
#define CPM_OPCR_MCS (1 << 0) /* Main clock source select register */
/* Reset Status Register */
#define CPM_RSR_HR (1 << 2)
#define CPM_RSR_WR (1 << 1)
#define CPM_RSR_PR (1 << 0)
/*************************************************************************
* TCU (Timer Counter Unit)
*************************************************************************/
#define TCU_TSTR (TCU_BASE + 0xF0) /* Timer Status Register,Only Used In Tcu2 Mode */
#define TCU_TSTSR (TCU_BASE + 0xF4) /* Timer Status Set Register */
#define TCU_TSTCR (TCU_BASE + 0xF8) /* Timer Status Clear Register */
#define TCU_TSR (TCU_BASE + 0x1C) /* Timer Stop Register */
#define TCU_TSSR (TCU_BASE + 0x2C) /* Timer Stop Set Register */
#define TCU_TSCR (TCU_BASE + 0x3C) /* Timer Stop Clear Register */
#define TCU_TER (TCU_BASE + 0x10) /* Timer Counter Enable Register */
#define TCU_TESR (TCU_BASE + 0x14) /* Timer Counter Enable Set Register */
#define TCU_TECR (TCU_BASE + 0x18) /* Timer Counter Enable Clear Register */
#define TCU_TFR (TCU_BASE + 0x20) /* Timer Flag Register */
#define TCU_TFSR (TCU_BASE + 0x24) /* Timer Flag Set Register */
#define TCU_TFCR (TCU_BASE + 0x28) /* Timer Flag Clear Register */
#define TCU_TMR (TCU_BASE + 0x30) /* Timer Mask Register */
#define TCU_TMSR (TCU_BASE + 0x34) /* Timer Mask Set Register */
#define TCU_TMCR (TCU_BASE + 0x38) /* Timer Mask Clear Register */
#define TCU_TDFR0 (TCU_BASE + 0x40) /* Timer Data Full Register */
#define TCU_TDHR0 (TCU_BASE + 0x44) /* Timer Data Half Register */
#define TCU_TCNT0 (TCU_BASE + 0x48) /* Timer Counter Register */
#define TCU_TCSR0 (TCU_BASE + 0x4C) /* Timer Control Register */
#define TCU_TDFR1 (TCU_BASE + 0x50)
#define TCU_TDHR1 (TCU_BASE + 0x54)
#define TCU_TCNT1 (TCU_BASE + 0x58)
#define TCU_TCSR1 (TCU_BASE + 0x5C)
#define TCU_TDFR2 (TCU_BASE + 0x60)
#define TCU_TDHR2 (TCU_BASE + 0x64)
#define TCU_TCNT2 (TCU_BASE + 0x68)
#define TCU_TCSR2 (TCU_BASE + 0x6C)
#define TCU_TDFR3 (TCU_BASE + 0x70)
#define TCU_TDHR3 (TCU_BASE + 0x74)
#define TCU_TCNT3 (TCU_BASE + 0x78)
#define TCU_TCSR3 (TCU_BASE + 0x7C)
#define TCU_TDFR4 (TCU_BASE + 0x80)
#define TCU_TDHR4 (TCU_BASE + 0x84)
#define TCU_TCNT4 (TCU_BASE + 0x88)
#define TCU_TCSR4 (TCU_BASE + 0x8C)
#define TCU_TDFR5 (TCU_BASE + 0x90)
#define TCU_TDHR5 (TCU_BASE + 0x94)
#define TCU_TCNT5 (TCU_BASE + 0x98)
#define TCU_TCSR5 (TCU_BASE + 0x9C)
#define REG_TCU_TSTR REG32(TCU_TSTR)
#define REG_TCU_TSTSR REG32(TCU_TSTSR)
#define REG_TCU_TSTCR REG32(TCU_TSTCR)
#define REG_TCU_TSR REG32(TCU_TSR)
#define REG_TCU_TSSR REG32(TCU_TSSR)
#define REG_TCU_TSCR REG32(TCU_TSCR)
#define REG_TCU_TER REG16(TCU_TER)
#define REG_TCU_TESR REG32(TCU_TESR)
#define REG_TCU_TECR REG32(TCU_TECR)
#define REG_TCU_TFR REG32(TCU_TFR)
#define REG_TCU_TFSR REG32(TCU_TFSR)
#define REG_TCU_TFCR REG32(TCU_TFCR)
#define REG_TCU_TMR REG32(TCU_TMR)
#define REG_TCU_TMSR REG32(TCU_TMSR)
#define REG_TCU_TMCR REG32(TCU_TMCR)
#define REG_TCU_TDFR0 REG16(TCU_TDFR0)
#define REG_TCU_TDHR0 REG16(TCU_TDHR0)
#define REG_TCU_TCNT0 REG16(TCU_TCNT0)
#define REG_TCU_TCSR0 REG16(TCU_TCSR0)
#define REG_TCU_TDFR1 REG16(TCU_TDFR1)
#define REG_TCU_TDHR1 REG16(TCU_TDHR1)
#define REG_TCU_TCNT1 REG16(TCU_TCNT1)
#define REG_TCU_TCSR1 REG16(TCU_TCSR1)
#define REG_TCU_TDFR2 REG16(TCU_TDFR2)
#define REG_TCU_TDHR2 REG16(TCU_TDHR2)
#define REG_TCU_TCNT2 REG16(TCU_TCNT2)
#define REG_TCU_TCSR2 REG16(TCU_TCSR2)
#define REG_TCU_TDFR3 REG16(TCU_TDFR3)
#define REG_TCU_TDHR3 REG16(TCU_TDHR3)
#define REG_TCU_TCNT3 REG16(TCU_TCNT3)
#define REG_TCU_TCSR3 REG16(TCU_TCSR3)
#define REG_TCU_TDFR4 REG16(TCU_TDFR4)
#define REG_TCU_TDHR4 REG16(TCU_TDHR4)
#define REG_TCU_TCNT4 REG16(TCU_TCNT4)
#define REG_TCU_TCSR4 REG16(TCU_TCSR4)
// n = 0,1,2,3,4,5
#define TCU_TDFR(n) (TCU_BASE + (0x40 + (n)*0x10)) /* Timer Data Full Reg */
#define TCU_TDHR(n) (TCU_BASE + (0x44 + (n)*0x10)) /* Timer Data Half Reg */
#define TCU_TCNT(n) (TCU_BASE + (0x48 + (n)*0x10)) /* Timer Counter Reg */
#define TCU_TCSR(n) (TCU_BASE + (0x4C + (n)*0x10)) /* Timer Control Reg */
#define TCU_OSTDR (TCU_BASE + 0xe0) /* Operating System Timer Data Reg */
#define TCU_OSTCNT (TCU_BASE + 0xe8) /* Operating System Timer Counter Reg */
#define TCU_OSTCSR (TCU_BASE + 0xeC) /* Operating System Timer Control Reg */
#define REG_TCU_TDFR(n) REG16(TCU_TDFR((n)))
#define REG_TCU_TDHR(n) REG16(TCU_TDHR((n)))
#define REG_TCU_TCNT(n) REG16(TCU_TCNT((n)))
#define REG_TCU_TCSR(n) REG16(TCU_TCSR((n)))
#define REG_TCU_OSTDR REG32(TCU_OSTDR)
#define REG_TCU_OSTCNT REG32(TCU_OSTCNT)
#define REG_TCU_OSTCSR REG32(TCU_OSTCSR)
// Register definitions
#define TCU_TSTR_REAL2 (1 << 18) /* only used in TCU2 mode */
#define TCU_TSTR_REAL1 (1 << 17) /* only used in TCU2 mode */
#define TCU_TSTR_BUSY2 (1 << 2) /* only used in TCU2 mode */
#define TCU_TSTR_BUSY1 (1 << 1) /* only used in TCU2 mode */
#define TCU_TSTSR_REAL2 (1 << 18)
#define TCU_TSTSR_REAL1 (1 << 17)
#define TCU_TSTSR_BUSY2 (1 << 2)
#define TCU_TSTSR_BUSY1 (1 << 1)
#define TCU_TSTCR_REAL2 (1 << 18)
#define TCU_TSTCR_REAL1 (1 << 17)
#define TCU_TSTCR_BUSY2 (1 << 2)
#define TCU_TSTCR_BUSY1 (1 << 1)
#define TCU_TSR_WDTS (1 << 16) /*the clock supplies to wdt is stopped */
#define TCU_TSR_OSTS (1 << 15) /*the clock supplies to osts is stopped */
#define TCU_TSR_STOP5 (1 << 5) /*the clock supplies to timer5 is stopped */
#define TCU_TSR_STOP4 (1 << 4) /*the clock supplies to timer4 is stopped */
#define TCU_TSR_STOP3 (1 << 3) /*the clock supplies to timer3 is stopped */
#define TCU_TSR_STOP2 (1 << 2) /*the clock supplies to timer2 is stopped */
#define TCU_TSR_STOP1 (1 << 1) /*the clock supplies to timer1 is stopped */
#define TCU_TSR_STOP0 (1 << 0) /*the clock supplies to timer0 is stopped */
#define TCU_TSSR_WDTSS (1 << 16)
#define TCU_TSSR_OSTSS (1 << 15)
#define TCU_TSSR_STPS5 (1 << 5)
#define TCU_TSSR_STPS4 (1 << 4)
#define TCU_TSSR_STPS3 (1 << 3)
#define TCU_TSSR_STPS2 (1 << 2)
#define TCU_TSSR_STPS1 (1 << 1)
#define TCU_TSSR_STPS0 (1 << 0)
#define TCU_TSCR_WDTSC (1 << 16)
#define TCU_TSCR_OSTSC (1 << 15)
#define TCU_TSCR_STPC5 (1 << 5)
#define TCU_TSCR_STPC4 (1 << 4)
#define TCU_TSCR_STPC3 (1 << 3)
#define TCU_TSCR_STPC2 (1 << 2)
#define TCU_TSCR_STPC1 (1 << 1)
#define TCU_TSCR_STPC0 (1 << 0)
#define TCU_TER_OSTEN (1 << 15) /* enable the counter in ost */
#define TCU_TER_TCEN5 (1 << 5) /* enable the counter in timer5 */
#define TCU_TER_TCEN4 (1 << 4)
#define TCU_TER_TCEN3 (1 << 3)
#define TCU_TER_TCEN2 (1 << 2)
#define TCU_TER_TCEN1 (1 << 1)
#define TCU_TER_TCEN0 (1 << 0)
#define TCU_TESR_OSTST (1 << 15)
#define TCU_TESR_TCST5 (1 << 5)
#define TCU_TESR_TCST4 (1 << 4)
#define TCU_TESR_TCST3 (1 << 3)
#define TCU_TESR_TCST2 (1 << 2)
#define TCU_TESR_TCST1 (1 << 1)
#define TCU_TESR_TCST0 (1 << 0)
#define TCU_TECR_OSTCL (1 << 15)
#define TCU_TECR_TCCL5 (1 << 5)
#define TCU_TECR_TCCL4 (1 << 4)
#define TCU_TECR_TCCL3 (1 << 3)
#define TCU_TECR_TCCL2 (1 << 2)
#define TCU_TECR_TCCL1 (1 << 1)
#define TCU_TECR_TCCL0 (1 << 0)
#define TCU_TFR_HFLAG5 (1 << 21) /* half comparison match flag */
#define TCU_TFR_HFLAG4 (1 << 20)
#define TCU_TFR_HFLAG3 (1 << 19)
#define TCU_TFR_HFLAG2 (1 << 18)
#define TCU_TFR_HFLAG1 (1 << 17)
#define TCU_TFR_HFLAG0 (1 << 16)
#define TCU_TFR_OSTFLAG (1 << 15) /* ost comparison match flag */
#define TCU_TFR_FFLAG5 (1 << 5) /* full comparison match flag */
#define TCU_TFR_FFLAG4 (1 << 4)
#define TCU_TFR_FFLAG3 (1 << 3)
#define TCU_TFR_FFLAG2 (1 << 2)
#define TCU_TFR_FFLAG1 (1 << 1)
#define TCU_TFR_FFLAG0 (1 << 0)
#define TCU_TFSR_HFST5 (1 << 21)
#define TCU_TFSR_HFST4 (1 << 20)
#define TCU_TFSR_HFST3 (1 << 19)
#define TCU_TFSR_HFST2 (1 << 18)
#define TCU_TFSR_HFST1 (1 << 17)
#define TCU_TFSR_HFST0 (1 << 16)
#define TCU_TFSR_OSTFST (1 << 15)
#define TCU_TFSR_FFST5 (1 << 5)
#define TCU_TFSR_FFST4 (1 << 4)
#define TCU_TFSR_FFST3 (1 << 3)
#define TCU_TFSR_FFST2 (1 << 2)
#define TCU_TFSR_FFST1 (1 << 1)
#define TCU_TFSR_FFST0 (1 << 0)
#define TCU_TFCR_HFCL5 (1 << 21)
#define TCU_TFCR_HFCL4 (1 << 20)
#define TCU_TFCR_HFCL3 (1 << 19)
#define TCU_TFCR_HFCL2 (1 << 18)
#define TCU_TFCR_HFCL1 (1 << 17)
#define TCU_TFCR_HFCL0 (1 << 16)
#define TCU_TFCR_OSTFCL (1 << 15)
#define TCU_TFCR_FFCL5 (1 << 5)
#define TCU_TFCR_FFCL4 (1 << 4)
#define TCU_TFCR_FFCL3 (1 << 3)
#define TCU_TFCR_FFCL2 (1 << 2)
#define TCU_TFCR_FFCL1 (1 << 1)
#define TCU_TFCR_FFCL0 (1 << 0)
#define TCU_TMR_HMASK5 (1 << 21) /* half comparison match interrupt mask */
#define TCU_TMR_HMASK4 (1 << 20)
#define TCU_TMR_HMASK3 (1 << 19)
#define TCU_TMR_HMASK2 (1 << 18)
#define TCU_TMR_HMASK1 (1 << 17)
#define TCU_TMR_HMASK0 (1 << 16)
#define TCU_TMR_OSTMASK (1 << 15) /* ost comparison match interrupt mask */
#define TCU_TMR_FMASK5 (1 << 5) /* full comparison match interrupt mask */
#define TCU_TMR_FMASK4 (1 << 4)
#define TCU_TMR_FMASK3 (1 << 3)
#define TCU_TMR_FMASK2 (1 << 2)
#define TCU_TMR_FMASK1 (1 << 1)
#define TCU_TMR_FMASK0 (1 << 0)
#define TCU_TMSR_HMST5 (1 << 21)
#define TCU_TMSR_HMST4 (1 << 20)
#define TCU_TMSR_HMST3 (1 << 19)
#define TCU_TMSR_HMST2 (1 << 18)
#define TCU_TMSR_HMST1 (1 << 17)
#define TCU_TMSR_HMST0 (1 << 16)
#define TCU_TMSR_OSTMST (1 << 15)
#define TCU_TMSR_FMST5 (1 << 5)
#define TCU_TMSR_FMST4 (1 << 4)
#define TCU_TMSR_FMST3 (1 << 3)
#define TCU_TMSR_FMST2 (1 << 2)
#define TCU_TMSR_FMST1 (1 << 1)
#define TCU_TMSR_FMST0 (1 << 0)
#define TCU_TMCR_HMCL5 (1 << 21)
#define TCU_TMCR_HMCL4 (1 << 20)
#define TCU_TMCR_HMCL3 (1 << 19)
#define TCU_TMCR_HMCL2 (1 << 18)
#define TCU_TMCR_HMCL1 (1 << 17)
#define TCU_TMCR_HMCL0 (1 << 16)
#define TCU_TMCR_OSTMCL (1 << 15)
#define TCU_TMCR_FMCL5 (1 << 5)
#define TCU_TMCR_FMCL4 (1 << 4)
#define TCU_TMCR_FMCL3 (1 << 3)
#define TCU_TMCR_FMCL2 (1 << 2)
#define TCU_TMCR_FMCL1 (1 << 1)
#define TCU_TMCR_FMCL0 (1 << 0)
#define TCU_TCSR_CNT_CLRZ (1 << 10) /* clear counter to 0, only used in TCU2 mode */
#define TCU_TCSR_PWM_SD (1 << 9) /* shut down the pwm output only used in TCU1 mode */
#define TCU_TCSR_PWM_INITL_HIGH (1 << 8) /* selects an initial output level for pwm output */
#define TCU_TCSR_PWM_EN (1 << 7) /* pwm pin output enable */
#define TCU_TCSR_PRESCALE_BIT 3 /* select the tcnt count clock frequency*/
#define TCU_TCSR_PRESCALE_MASK (0x7 << TCU_TCSR_PRESCALE_BIT)
#define TCU_TCSR_PRESCALE1 (0x0 << TCU_TCSR_PRESCALE_BIT)
#define TCU_TCSR_PRESCALE4 (0x1 << TCU_TCSR_PRESCALE_BIT)
#define TCU_TCSR_PRESCALE16 (0x2 << TCU_TCSR_PRESCALE_BIT)
#define TCU_TCSR_PRESCALE64 (0x3 << TCU_TCSR_PRESCALE_BIT)
#define TCU_TCSR_PRESCALE256 (0x4 << TCU_TCSR_PRESCALE_BIT)
#define TCU_TCSR_PRESCALE1024 (0x5 << TCU_TCSR_PRESCALE_BIT)
#define TCU_TCSR_EXT_EN (1 << 2) /* select extal as the timer clock input */
#define TCU_TCSR_RTC_EN (1 << 1) /* select rtcclk as the timer clock input */
#define TCU_TCSR_PCK_EN (1 << 0) /* select pclk as the timer clock input */
#define TCU_TSTR_REAL2 (1 << 18) /* the value read from counter 2 is a real value */
#define TCU_TSTR_REAL1 (1 << 17)
#define TCU_TSTR_BUSY2 (1 << 2) /* the counter 2 is busy now */
#define TCU_TSTR_BUSY1 (1 << 1)
#define TCU_TSTSR_REALS2 (1 << 18)
#define TCU_TSTSR_REALS1 (1 << 17)
#define TCU_TSTSR_BUSYS2 (1 << 2)
#define TCU_TSTSR_BUSYS1 (1 << 1)
#define TCU_TSTCR_REALC2 (1 << 18)
#define TCU_TSTCR_REALC1 (1 << 17)
#define TCU_TSTCR_BUSYC2 (1 << 2)
#define TCU_TSTCR_BUSYC1 (1 << 1)
#define TCU_OSTCR_CNT_MD (1 << 15) /* when the value counter is equal to compare value,the counter is go on increasing till overflow,and then icrease from 0 */
#define TCU_OSTCR_PWM_SD (1 << 9) /* shut down the pwm output, only used in TCU1 mode */
#define TCU_OSTCSR_PRESCALE_BIT 3
#define TCU_OSTCSR_PRESCALE_MASK (0x7 << TCU_OSTCSR_PRESCALE_BIT)
#define TCU_OSTCSR_PRESCALE1 (0x0 << TCU_OSTCSR_PRESCALE_BIT)
#define TCU_OSTCSR_PRESCALE4 (0x1 << TCU_OSTCSR_PRESCALE_BIT)
#define TCU_OSTCSR_PRESCALE16 (0x2 << TCU_OSTCSR_PRESCALE_BIT)
#define TCU_OSTCSR_PRESCALE64 (0x3 << TCU_OSTCSR_PRESCALE_BIT)
#define TCU_OSTCSR_PRESCALE256 (0x4 << TCU_OSTCSR_PRESCALE_BIT)
#define TCU_OSTCSR_PRESCALE1024 (0x5 << TCU_OSTCSR_PRESCALE_BIT)
#define TCU_OSTCSR_EXT_EN (1 << 2) /* select extal as the timer clock input */
#define TCU_OSTCSR_RTC_EN (1 << 1) /* select rtcclk as the timer clock input */
#define TCU_OSTCSR_PCK_EN (1 << 0) /* select pclk as the timer clock input */
/*************************************************************************
* WDT (WatchDog Timer)
*************************************************************************/
#define WDT_TDR (WDT_BASE + 0x00)
#define WDT_TCER (WDT_BASE + 0x04)
#define WDT_TCNT (WDT_BASE + 0x08)
#define WDT_TCSR (WDT_BASE + 0x0C)
#define REG_WDT_TDR REG16(WDT_TDR)
#define REG_WDT_TCER REG8(WDT_TCER)
#define REG_WDT_TCNT REG16(WDT_TCNT)
#define REG_WDT_TCSR REG16(WDT_TCSR)
// Register definition
#define WDT_TCSR_PRESCALE_BIT 3
#define WDT_TCSR_PRESCALE_MASK (0x7 << WDT_TCSR_PRESCALE_BIT)
#define WDT_TCSR_PRESCALE1 (0x0 << WDT_TCSR_PRESCALE_BIT)
#define WDT_TCSR_PRESCALE4 (0x1 << WDT_TCSR_PRESCALE_BIT)
#define WDT_TCSR_PRESCALE16 (0x2 << WDT_TCSR_PRESCALE_BIT)
#define WDT_TCSR_PRESCALE64 (0x3 << WDT_TCSR_PRESCALE_BIT)
#define WDT_TCSR_PRESCALE256 (0x4 << WDT_TCSR_PRESCALE_BIT)
#define WDT_TCSR_PRESCALE1024 (0x5 << WDT_TCSR_PRESCALE_BIT)
#define WDT_TCSR_EXT_EN (1 << 2)
#define WDT_TCSR_RTC_EN (1 << 1)
#define WDT_TCSR_PCK_EN (1 << 0)
#define WDT_TCER_TCEN (1 << 0)
/*************************************************************************
* DMAC (DMA Controller)
*************************************************************************/
#define MAX_DMA_NUM 6 /* max 8 channels */
#define HALF_DMA_NUM 6 /* the number of one dma controller's channels */
/* m is the DMA controller index (0, 1), n is the DMA channel index (0 - 11) */
#define DMAC_DSAR(n) (DMAC_BASE + ((n)/HALF_DMA_NUM*0x100 + 0x00 + ((n)-(n)/HALF_DMA_NUM*HALF_DMA_NUM) * 0x20)) /* DMA source address */
#define DMAC_DTAR(n) (DMAC_BASE + ((n)/HALF_DMA_NUM*0x100 + 0x04 + ((n)-(n)/HALF_DMA_NUM*HALF_DMA_NUM) * 0x20)) /* DMA target address */
#define DMAC_DTCR(n) (DMAC_BASE + ((n)/HALF_DMA_NUM*0x100 + 0x08 + ((n)-(n)/HALF_DMA_NUM*HALF_DMA_NUM) * 0x20)) /* DMA transfer count */
#define DMAC_DRSR(n) (DMAC_BASE + ((n)/HALF_DMA_NUM*0x100 + 0x0c + ((n)-(n)/HALF_DMA_NUM*HALF_DMA_NUM) * 0x20)) /* DMA request source */
#define DMAC_DCCSR(n) (DMAC_BASE + ((n)/HALF_DMA_NUM*0x100 + 0x10 + ((n)-(n)/HALF_DMA_NUM*HALF_DMA_NUM) * 0x20)) /* DMA control/status */
#define DMAC_DCMD(n) (DMAC_BASE + ((n)/HALF_DMA_NUM*0x100 + 0x14 + ((n)-(n)/HALF_DMA_NUM*HALF_DMA_NUM) * 0x20)) /* DMA command */
#define DMAC_DDA(n) (DMAC_BASE + ((n)/HALF_DMA_NUM*0x100 + 0x18 + ((n)-(n)/HALF_DMA_NUM*HALF_DMA_NUM) * 0x20)) /* DMA descriptor address */
#define DMAC_DSD(n) (DMAC_BASE + ((n)/HALF_DMA_NUM*0x100 + 0xc0 + ((n)-(n)/HALF_DMA_NUM*HALF_DMA_NUM) * 0x04)) /* DMA Stride Address */
#define DMAC_DMACR(m) (DMAC_BASE + 0x0300 + 0x100 * (m)) /* DMA control register */
#define DMAC_DMAIPR(m) (DMAC_BASE + 0x0304 + 0x100 * (m)) /* DMA interrupt pending */
#define DMAC_DMADBR(m) (DMAC_BASE + 0x0308 + 0x100 * (m)) /* DMA doorbell */
#define DMAC_DMADBSR(m) (DMAC_BASE + 0x030C + 0x100 * (m)) /* DMA doorbell set */
#define DMAC_DMACKE(m) (DMAC_BASE + 0x0310 + 0x100 * (m))
#define REG_DMAC_DSAR(n) REG32(DMAC_DSAR((n)))
#define REG_DMAC_DTAR(n) REG32(DMAC_DTAR((n)))
#define REG_DMAC_DTCR(n) REG32(DMAC_DTCR((n)))
#define REG_DMAC_DRSR(n) REG32(DMAC_DRSR((n)))
#define REG_DMAC_DCCSR(n) REG32(DMAC_DCCSR((n)))
#define REG_DMAC_DCMD(n) REG32(DMAC_DCMD((n)))
#define REG_DMAC_DDA(n) REG32(DMAC_DDA((n)))
#define REG_DMAC_DSD(n) REG32(DMAC_DSD(n))
#define REG_DMAC_DMACR(m) REG32(DMAC_DMACR(m))
#define REG_DMAC_DMAIPR(m) REG32(DMAC_DMAIPR(m))
#define REG_DMAC_DMADBR(m) REG32(DMAC_DMADBR(m))
#define REG_DMAC_DMADBSR(m) REG32(DMAC_DMADBSR(m))
#define REG_DMAC_DMACKE(m) REG32(DMAC_DMACKE(m))
// DMA request source register
#define DMAC_DRSR_RS_BIT 0
#define DMAC_DRSR_RS_MASK (0x3f << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_EXT (0 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_NAND (1 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_BCH_ENC (2 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_BCH_DEC (3 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_AUTO (8 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_TSSIIN (9 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_UART3OUT (14 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_UART3IN (15 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_UART2OUT (16 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_UART2IN (17 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_UART1OUT (18 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_UART1IN (19 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_UART0OUT (20 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_UART0IN (21 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_SSI0OUT (22 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_SSI0IN (23 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_AICOUT (24 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_AICIN (25 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_MSC0OUT (26 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_MSC0IN (27 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_TCU (28 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_SADC (29 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_MSC1OUT (30 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_MSC1IN (31 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_SSI1OUT (32 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_SSI1IN (33 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_PMOUT (34 << DMAC_DRSR_RS_BIT)
#define DMAC_DRSR_RS_PMIN (35 << DMAC_DRSR_RS_BIT)
// DMA channel control/status register
#define DMAC_DCCSR_NDES (1 << 31) /* descriptor (0) or not (1) ? */
#define DMAC_DCCSR_DES8 (1 << 30) /* Descriptor 8 Word */
#define DMAC_DCCSR_DES4 (0 << 30) /* Descriptor 4 Word */
#define DMAC_DCCSR_CDOA_BIT 16 /* copy of DMA offset address */
#define DMAC_DCCSR_CDOA_MASK (0xff << DMAC_DCCSR_CDOA_BIT)
#define DMAC_DCCSR_BERR (1 << 7) /* BCH error within this transfer, Only for channel 0 */
#define DMAC_DCCSR_INV (1 << 6) /* descriptor invalid */
#define DMAC_DCCSR_AR (1 << 4) /* address error */
#define DMAC_DCCSR_TT (1 << 3) /* transfer terminated */
#define DMAC_DCCSR_HLT (1 << 2) /* DMA halted */
#define DMAC_DCCSR_CT (1 << 1) /* count terminated */
#define DMAC_DCCSR_EN (1 << 0) /* channel enable bit */
// DMA channel command register
#define DMAC_DCMD_EACKS_LOW (1 << 31) /* External DACK Output Level Select, active low */
#define DMAC_DCMD_EACKS_HIGH (0 << 31) /* External DACK Output Level Select, active high */
#define DMAC_DCMD_EACKM_WRITE (1 << 30) /* External DACK Output Mode Select, output in write cycle */
#define DMAC_DCMD_EACKM_READ (0 << 30) /* External DACK Output Mode Select, output in read cycle */
#define DMAC_DCMD_ERDM_BIT 28 /* External DREQ Detection Mode Select */
#define DMAC_DCMD_ERDM_MASK (0x03 << DMAC_DCMD_ERDM_BIT)
#define DMAC_DCMD_ERDM_LOW (0 << DMAC_DCMD_ERDM_BIT)
#define DMAC_DCMD_ERDM_FALL (1 << DMAC_DCMD_ERDM_BIT)
#define DMAC_DCMD_ERDM_HIGH (2 << DMAC_DCMD_ERDM_BIT)
#define DMAC_DCMD_ERDM_RISE (3 << DMAC_DCMD_ERDM_BIT)
#define DMAC_DCMD_BLAST (1 << 25) /* BCH last */
#define DMAC_DCMD_SAI (1 << 23) /* source address increment */
#define DMAC_DCMD_DAI (1 << 22) /* dest address increment */
#define DMAC_DCMD_RDIL_BIT 16 /* request detection interval length */
#define DMAC_DCMD_RDIL_MASK (0x0f << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_IGN (0 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_2 (1 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_4 (2 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_8 (3 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_12 (4 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_16 (5 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_20 (6 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_24 (7 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_28 (8 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_32 (9 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_48 (10 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_60 (11 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_64 (12 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_124 (13 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_128 (14 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_RDIL_200 (15 << DMAC_DCMD_RDIL_BIT)
#define DMAC_DCMD_SWDH_BIT 14 /* source port width */
#define DMAC_DCMD_SWDH_MASK (0x03 << DMAC_DCMD_SWDH_BIT)
#define DMAC_DCMD_SWDH_32 (0 << DMAC_DCMD_SWDH_BIT)
#define DMAC_DCMD_SWDH_8 (1 << DMAC_DCMD_SWDH_BIT)
#define DMAC_DCMD_SWDH_16 (2 << DMAC_DCMD_SWDH_BIT)
#define DMAC_DCMD_DWDH_BIT 12 /* dest port width */
#define DMAC_DCMD_DWDH_MASK (0x03 << DMAC_DCMD_DWDH_BIT)
#define DMAC_DCMD_DWDH_32 (0 << DMAC_DCMD_DWDH_BIT)
#define DMAC_DCMD_DWDH_8 (1 << DMAC_DCMD_DWDH_BIT)
#define DMAC_DCMD_DWDH_16 (2 << DMAC_DCMD_DWDH_BIT)
#define DMAC_DCMD_DS_BIT 8 /* transfer data size of a data unit */
#define DMAC_DCMD_DS_MASK (0x07 << DMAC_DCMD_DS_BIT)
#define DMAC_DCMD_DS_32BIT (0 << DMAC_DCMD_DS_BIT)
#define DMAC_DCMD_DS_8BIT (1 << DMAC_DCMD_DS_BIT)
#define DMAC_DCMD_DS_16BIT (2 << DMAC_DCMD_DS_BIT)
#define DMAC_DCMD_DS_16BYTE (3 << DMAC_DCMD_DS_BIT)
#define DMAC_DCMD_DS_32BYTE (4 << DMAC_DCMD_DS_BIT)
#define DMAC_DCMD_STDE (1 << 5) /* Stride Disable/Enable */
#define DMAC_DCMD_DES_V (1 << 4) /* descriptor valid flag */
#define DMAC_DCMD_DES_VM (1 << 3) /* descriptor valid mask: 1:support V-bit */
#define DMAC_DCMD_DES_VIE (1 << 2) /* DMA valid error interrupt enable */
#define DMAC_DCMD_TIE (1 << 1) /* DMA transfer interrupt enable */
#define DMAC_DCMD_LINK (1 << 0) /* descriptor link enable */
// DMA descriptor address register
#define DMAC_DDA_BASE_BIT 12 /* descriptor base address */
#define DMAC_DDA_BASE_MASK (0x0fffff << DMAC_DDA_BASE_BIT)
#define DMAC_DDA_OFFSET_BIT 4 /* descriptor offset address */
#define DMAC_DDA_OFFSET_MASK (0x0ff << DMAC_DDA_OFFSET_BIT)
// DMA stride address register
#define DMAC_DSD_TSD_BIT 16 /* target stride address */
#define DMAC_DSD_TSD_MASK (0xffff << DMAC_DSD_TSD_BIT)
#define DMAC_DSD_SSD_BIT 0 /* source stride address */
#define DMAC_DSD_SSD_MASK (0xffff << DMAC_DSD_SSD_BIT)
// DMA control register
#define DMAC_DMACR_FMSC (1 << 31) /* MSC Fast DMA mode */
#define DMAC_DMACR_FSSI (1 << 30) /* SSI Fast DMA mode */
#define DMAC_DMACR_FTSSI (1 << 29) /* TSSI Fast DMA mode */
#define DMAC_DMACR_FUART (1 << 28) /* UART Fast DMA mode */
#define DMAC_DMACR_FAIC (1 << 27) /* AIC Fast DMA mode */
#define DMAC_DMACR_PR_BIT 8 /* channel priority mode */
#define DMAC_DMACR_PR_MASK (0x03 << DMAC_DMACR_PR_BIT)
#define DMAC_DMACR_PR_012345 (0 << DMAC_DMACR_PR_BIT)
#define DMAC_DMACR_PR_120345 (1 << DMAC_DMACR_PR_BIT)
#define DMAC_DMACR_PR_230145 (2 << DMAC_DMACR_PR_BIT)
#define DMAC_DMACR_PR_340125 (3 << DMAC_DMACR_PR_BIT)
#define DMAC_DMACR_HLT (1 << 3) /* DMA halt flag */
#define DMAC_DMACR_AR (1 << 2) /* address error flag */
#define DMAC_DMACR_DMAE (1 << 0) /* DMA enable bit */
// DMA doorbell register
#define DMAC_DMADBR_DB5 (1 << 5) /* doorbell for channel 5 */
#define DMAC_DMADBR_DB4 (1 << 4) /* doorbell for channel 4 */
#define DMAC_DMADBR_DB3 (1 << 3) /* doorbell for channel 3 */
#define DMAC_DMADBR_DB2 (1 << 2) /* doorbell for channel 2 */
#define DMAC_DMADBR_DB1 (1 << 1) /* doorbell for channel 1 */
#define DMAC_DMADBR_DB0 (1 << 0) /* doorbell for channel 0 */
// DMA doorbell set register
#define DMAC_DMADBSR_DBS5 (1 << 5) /* enable doorbell for channel 5 */
#define DMAC_DMADBSR_DBS4 (1 << 4) /* enable doorbell for channel 4 */
#define DMAC_DMADBSR_DBS3 (1 << 3) /* enable doorbell for channel 3 */
#define DMAC_DMADBSR_DBS2 (1 << 2) /* enable doorbell for channel 2 */
#define DMAC_DMADBSR_DBS1 (1 << 1) /* enable doorbell for channel 1 */
#define DMAC_DMADBSR_DBS0 (1 << 0) /* enable doorbell for channel 0 */
// DMA interrupt pending register
#define DMAC_DMAIPR_CIRQ5 (1 << 5) /* irq pending status for channel 5 */
#define DMAC_DMAIPR_CIRQ4 (1 << 4) /* irq pending status for channel 4 */
#define DMAC_DMAIPR_CIRQ3 (1 << 3) /* irq pending status for channel 3 */
#define DMAC_DMAIPR_CIRQ2 (1 << 2) /* irq pending status for channel 2 */
#define DMAC_DMAIPR_CIRQ1 (1 << 1) /* irq pending status for channel 1 */
#define DMAC_DMAIPR_CIRQ0 (1 << 0) /* irq pending status for channel 0 */
/*************************************************************************
* GPIO (General-Purpose I/O Ports)
*************************************************************************/
#define MAX_GPIO_NUM 192
#define GPIO_WAKEUP (32 * 4 + 30)
//n = 0,1,2,3,4,5 (PORTA, PORTB, PORTC, PORTD, PORTE, PORTF)
#define GPIO_PXPIN(n) (GPIO_BASE + (0x00 + (n)*0x100)) /* PIN Level Register */
#define GPIO_PXDAT(n) (GPIO_BASE + (0x10 + (n)*0x100)) /* Port Data Register */
#define GPIO_PXDATS(n) (GPIO_BASE + (0x14 + (n)*0x100)) /* Port Data Set Register */
#define GPIO_PXDATC(n) (GPIO_BASE + (0x18 + (n)*0x100)) /* Port Data Clear Register */
#define GPIO_PXIM(n) (GPIO_BASE + (0x20 + (n)*0x100)) /* Interrupt Mask Register */
#define GPIO_PXIMS(n) (GPIO_BASE + (0x24 + (n)*0x100)) /* Interrupt Mask Set Reg */
#define GPIO_PXIMC(n) (GPIO_BASE + (0x28 + (n)*0x100)) /* Interrupt Mask Clear Reg */
#define GPIO_PXPE(n) (GPIO_BASE + (0x30 + (n)*0x100)) /* Pull Enable Register */
#define GPIO_PXPES(n) (GPIO_BASE + (0x34 + (n)*0x100)) /* Pull Enable Set Reg. */
#define GPIO_PXPEC(n) (GPIO_BASE + (0x38 + (n)*0x100)) /* Pull Enable Clear Reg. */
#define GPIO_PXFUN(n) (GPIO_BASE + (0x40 + (n)*0x100)) /* Function Register */
#define GPIO_PXFUNS(n) (GPIO_BASE + (0x44 + (n)*0x100)) /* Function Set Register */
#define GPIO_PXFUNC(n) (GPIO_BASE + (0x48 + (n)*0x100)) /* Function Clear Register */
#define GPIO_PXSEL(n) (GPIO_BASE + (0x50 + (n)*0x100)) /* Select Register */
#define GPIO_PXSELS(n) (GPIO_BASE + (0x54 + (n)*0x100)) /* Select Set Register */
#define GPIO_PXSELC(n) (GPIO_BASE + (0x58 + (n)*0x100)) /* Select Clear Register */
#define GPIO_PXDIR(n) (GPIO_BASE + (0x60 + (n)*0x100)) /* Direction Register */
#define GPIO_PXDIRS(n) (GPIO_BASE + (0x64 + (n)*0x100)) /* Direction Set Register */
#define GPIO_PXDIRC(n) (GPIO_BASE + (0x68 + (n)*0x100)) /* Direction Clear Register */
#define GPIO_PXTRG(n) (GPIO_BASE + (0x70 + (n)*0x100)) /* Trigger Register */
#define GPIO_PXTRGS(n) (GPIO_BASE + (0x74 + (n)*0x100)) /* Trigger Set Register */
#define GPIO_PXTRGC(n) (GPIO_BASE + (0x78 + (n)*0x100)) /* Trigger Set Register */
#define GPIO_PXFLG(n) (GPIO_BASE + (0x80 + (n)*0x100)) /* Port Flag Register */
#define GPIO_PXFLGC(n) (GPIO_BASE + (0x14 + (n)*0x100)) /* Port Flag Clear Register */
#define REG_GPIO_PXPIN(n) REG32(GPIO_PXPIN((n))) /* PIN level */
#define REG_GPIO_PXDAT(n) REG32(GPIO_PXDAT((n))) /* 1: interrupt pending */
#define REG_GPIO_PXDATS(n) REG32(GPIO_PXDATS((n)))
#define REG_GPIO_PXDATC(n) REG32(GPIO_PXDATC((n)))
#define REG_GPIO_PXIM(n) REG32(GPIO_PXIM((n))) /* 1: mask pin interrupt */
#define REG_GPIO_PXIMS(n) REG32(GPIO_PXIMS((n)))
#define REG_GPIO_PXIMC(n) REG32(GPIO_PXIMC((n)))
#define REG_GPIO_PXPE(n) REG32(GPIO_PXPE((n))) /* 1: disable pull up/down */
#define REG_GPIO_PXPES(n) REG32(GPIO_PXPES((n)))
#define REG_GPIO_PXPEC(n) REG32(GPIO_PXPEC((n)))
#define REG_GPIO_PXFUN(n) REG32(GPIO_PXFUN((n))) /* 0:GPIO or intr, 1:FUNC */
#define REG_GPIO_PXFUNS(n) REG32(GPIO_PXFUNS((n)))
#define REG_GPIO_PXFUNC(n) REG32(GPIO_PXFUNC((n)))
#define REG_GPIO_PXSEL(n) REG32(GPIO_PXSEL((n))) /* 0:GPIO/Fun0,1:intr/fun1*/
#define REG_GPIO_PXSELS(n) REG32(GPIO_PXSELS((n)))
#define REG_GPIO_PXSELC(n) REG32(GPIO_PXSELC((n)))
#define REG_GPIO_PXDIR(n) REG32(GPIO_PXDIR((n))) /* 0:input/low-level-trig/falling-edge-trig, 1:output/high-level-trig/rising-edge-trig */
#define REG_GPIO_PXDIRS(n) REG32(GPIO_PXDIRS((n)))
#define REG_GPIO_PXDIRC(n) REG32(GPIO_PXDIRC((n)))
#define REG_GPIO_PXTRG(n) REG32(GPIO_PXTRG((n))) /* 0:level-trigger, 1:edge-trigger */
#define REG_GPIO_PXTRGS(n) REG32(GPIO_PXTRGS((n)))
#define REG_GPIO_PXTRGC(n) REG32(GPIO_PXTRGC((n)))
#define REG_GPIO_PXFLG(n) REG32(GPIO_PXFLG((n))) /* interrupt flag */
#define REG_GPIO_PXFLGC(n) REG32(GPIO_PXFLGC((n))) /* interrupt flag */
/*************************************************************************
* UART
*************************************************************************/
#define IRDA_BASE UART0_BASE
#define UART_BASE UART0_BASE
#define UART_OFF 0x1000
/* Register Offset */
#define OFF_RDR (0x00) /* R 8b H'xx */
#define OFF_TDR (0x00) /* W 8b H'xx */
#define OFF_DLLR (0x00) /* RW 8b H'00 */
#define OFF_DLHR (0x04) /* RW 8b H'00 */
#define OFF_IER (0x04) /* RW 8b H'00 */
#define OFF_ISR (0x08) /* R 8b H'01 */
#define OFF_FCR (0x08) /* W 8b H'00 */
#define OFF_LCR (0x0C) /* RW 8b H'00 */
#define OFF_MCR (0x10) /* RW 8b H'00 */
#define OFF_LSR (0x14) /* R 8b H'00 */
#define OFF_MSR (0x18) /* R 8b H'00 */
#define OFF_SPR (0x1C) /* RW 8b H'00 */
#define OFF_SIRCR (0x20) /* RW 8b H'00, UART0 */
#define OFF_UMR (0x24) /* RW 8b H'00, UART M Register */
#define OFF_UACR (0x28) /* RW 8b H'00, UART Add Cycle Register */
/* Register Address */
#define UART0_RDR (UART0_BASE + OFF_RDR)
#define UART0_TDR (UART0_BASE + OFF_TDR)
#define UART0_DLLR (UART0_BASE + OFF_DLLR)
#define UART0_DLHR (UART0_BASE + OFF_DLHR)
#define UART0_IER (UART0_BASE + OFF_IER)
#define UART0_ISR (UART0_BASE + OFF_ISR)
#define UART0_FCR (UART0_BASE + OFF_FCR)
#define UART0_LCR (UART0_BASE + OFF_LCR)
#define UART0_MCR (UART0_BASE + OFF_MCR)
#define UART0_LSR (UART0_BASE + OFF_LSR)
#define UART0_MSR (UART0_BASE + OFF_MSR)
#define UART0_SPR (UART0_BASE + OFF_SPR)
#define UART0_SIRCR (UART0_BASE + OFF_SIRCR)
#define UART0_UMR (UART0_BASE + OFF_UMR)
#define UART0_UACR (UART0_BASE + OFF_UACR)
#define UART1_RDR (UART1_BASE + OFF_RDR)
#define UART1_TDR (UART1_BASE + OFF_TDR)
#define UART1_DLLR (UART1_BASE + OFF_DLLR)
#define UART1_DLHR (UART1_BASE + OFF_DLHR)
#define UART1_IER (UART1_BASE + OFF_IER)
#define UART1_ISR (UART1_BASE + OFF_ISR)
#define UART1_FCR (UART1_BASE + OFF_FCR)
#define UART1_LCR (UART1_BASE + OFF_LCR)
#define UART1_MCR (UART1_BASE + OFF_MCR)
#define UART1_LSR (UART1_BASE + OFF_LSR)
#define UART1_MSR (UART1_BASE + OFF_MSR)
#define UART1_SPR (UART1_BASE + OFF_SPR)
#define UART1_SIRCR (UART1_BASE + OFF_SIRCR)
#define UART2_RDR (UART2_BASE + OFF_RDR)
#define UART2_TDR (UART2_BASE + OFF_TDR)
#define UART2_DLLR (UART2_BASE + OFF_DLLR)
#define UART2_DLHR (UART2_BASE + OFF_DLHR)
#define UART2_IER (UART2_BASE + OFF_IER)
#define UART2_ISR (UART2_BASE + OFF_ISR)
#define UART2_FCR (UART2_BASE + OFF_FCR)
#define UART2_LCR (UART2_BASE + OFF_LCR)
#define UART2_MCR (UART2_BASE + OFF_MCR)
#define UART2_LSR (UART2_BASE + OFF_LSR)
#define UART2_MSR (UART2_BASE + OFF_MSR)
#define UART2_SPR (UART2_BASE + OFF_SPR)
#define UART2_SIRCR (UART2_BASE + OFF_SIRCR)
#define UART3_RDR (UART3_BASE + OFF_RDR)
#define UART3_TDR (UART3_BASE + OFF_TDR)
#define UART3_DLLR (UART3_BASE + OFF_DLLR)
#define UART3_DLHR (UART3_BASE + OFF_DLHR)
#define UART3_IER (UART3_BASE + OFF_IER)
#define UART3_ISR (UART3_BASE + OFF_ISR)
#define UART3_FCR (UART3_BASE + OFF_FCR)
#define UART3_LCR (UART3_BASE + OFF_LCR)
#define UART3_MCR (UART3_BASE + OFF_MCR)
#define UART3_LSR (UART3_BASE + OFF_LSR)
#define UART3_MSR (UART3_BASE + OFF_MSR)
#define UART3_SPR (UART3_BASE + OFF_SPR)
#define UART3_SIRCR (UART3_BASE + OFF_SIRCR)
/*
* Define macros for UARTIER
* UART Interrupt Enable Register
*/
#define UARTIER_RIE (1 << 0) /* 0: receive fifo full interrupt disable */
#define UARTIER_TIE (1 << 1) /* 0: transmit fifo empty interrupt disable */
#define UARTIER_RLIE (1 << 2) /* 0: receive line status interrupt disable */
#define UARTIER_MIE (1 << 3) /* 0: modem status interrupt disable */
#define UARTIER_RTIE (1 << 4) /* 0: receive timeout interrupt disable */
/*
* Define macros for UARTISR
* UART Interrupt Status Register
*/
#define UARTISR_IP (1 << 0) /* 0: interrupt is pending 1: no interrupt */
#define UARTISR_IID (7 << 1) /* Source of Interrupt */
#define UARTISR_IID_MSI (0 << 1) /* Modem status interrupt */
#define UARTISR_IID_THRI (1 << 1) /* Transmitter holding register empty */
#define UARTISR_IID_RDI (2 << 1) /* Receiver data interrupt */
#define UARTISR_IID_RLSI (3 << 1) /* Receiver line status interrupt */
#define UARTISR_IID_RTO (6 << 1) /* Receive timeout */
#define UARTISR_FFMS (3 << 6) /* FIFO mode select, set when UARTFCR.FE is set to 1 */
#define UARTISR_FFMS_NO_FIFO (0 << 6)
#define UARTISR_FFMS_FIFO_MODE (3 << 6)
/*
* Define macros for UARTFCR
* UART FIFO Control Register
*/
#define UARTFCR_FE (1 << 0) /* 0: non-FIFO mode 1: FIFO mode */
#define UARTFCR_RFLS (1 << 1) /* write 1 to flush receive FIFO */
#define UARTFCR_TFLS (1 << 2) /* write 1 to flush transmit FIFO */
#define UARTFCR_DMS (1 << 3) /* 0: disable DMA mode */
#define UARTFCR_UUE (1 << 4) /* 0: disable UART */
#define UARTFCR_RTRG (3 << 6) /* Receive FIFO Data Trigger */
#define UARTFCR_RTRG_1 (0 << 6)
#define UARTFCR_RTRG_4 (1 << 6)
#define UARTFCR_RTRG_8 (2 << 6)
#define UARTFCR_RTRG_15 (3 << 6)
/*
* Define macros for UARTLCR
* UART Line Control Register
*/
#define UARTLCR_WLEN (3 << 0) /* word length */
#define UARTLCR_WLEN_5 (0 << 0)
#define UARTLCR_WLEN_6 (1 << 0)
#define UARTLCR_WLEN_7 (2 << 0)
#define UARTLCR_WLEN_8 (3 << 0)
#define UARTLCR_STOP (1 << 2) /* 0: 1 stop bit when word length is 5,6,7,8
1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */
#define UARTLCR_STOP1 (0 << 2)
#define UARTLCR_STOP2 (1 << 2)
#define UARTLCR_PE (1 << 3) /* 0: parity disable */
#define UARTLCR_PROE (1 << 4) /* 0: even parity 1: odd parity */
#define UARTLCR_SPAR (1 << 5) /* 0: sticky parity disable */
#define UARTLCR_SBRK (1 << 6) /* write 0 normal, write 1 send break */
#define UARTLCR_DLAB (1 << 7) /* 0: access UARTRDR/TDR/IER 1: access UARTDLLR/DLHR */
/*
* Define macros for UARTLSR
* UART Line Status Register
*/
#define UARTLSR_DR (1 << 0) /* 0: receive FIFO is empty 1: receive data is ready */
#define UARTLSR_ORER (1 << 1) /* 0: no overrun error */
#define UARTLSR_PER (1 << 2) /* 0: no parity error */
#define UARTLSR_FER (1 << 3) /* 0; no framing error */
#define UARTLSR_BRK (1 << 4) /* 0: no break detected 1: receive a break signal */
#define UARTLSR_TDRQ (1 << 5) /* 1: transmit FIFO half "empty" */
#define UARTLSR_TEMT (1 << 6) /* 1: transmit FIFO and shift registers empty */
#define UARTLSR_RFER (1 << 7) /* 0: no receive error 1: receive error in FIFO mode */
/*
* Define macros for UARTMCR
* UART Modem Control Register
*/
#define UARTMCR_RTS (1 << 1) /* 0: RTS_ output high, 1: RTS_ output low */
#define UARTMCR_LOOP (1 << 4) /* 0: normal 1: loopback mode */
#define UARTMCR_MCE (1 << 7) /* 0: modem function is disable */
/*
* Define macros for UARTMSR
* UART Modem Status Register
*/
#define UARTMSR_CCTS (1 << 0) /* 1: a change on CTS_ pin */
#define UARTMSR_CTS (1 << 4) /* 0: CTS_ pin is high */
/*
* Define macros for SIRCR
* Slow IrDA Control Register
*/
#define SIRCR_TSIRE (1 << 0) /* 0: transmitter is in UART mode 1: SIR mode */
#define SIRCR_RSIRE (1 << 1) /* 0: receiver is in UART mode 1: SIR mode */
#define SIRCR_TPWS (1 << 2) /* 0: transmit 0 pulse width is 3/16 of bit length
1: 0 pulse width is 1.6us for 115.2Kbps */
#define SIRCR_TDPL (1 << 3) /* 0: encoder generates a positive pulse for 0 */
#define SIRCR_RDPL (1 << 4) /* 0: decoder interprets positive pulse as 0 */
/*************************************************************************
* AIC (AC97/I2S Controller)
*************************************************************************/
#define AIC_FR (AIC_BASE + 0x000)
#define AIC_CR (AIC_BASE + 0x004)
#define AIC_ACCR1 (AIC_BASE + 0x008)
#define AIC_ACCR2 (AIC_BASE + 0x00C)
#define AIC_I2SCR (AIC_BASE + 0x010)
#define AIC_SR (AIC_BASE + 0x014)
#define AIC_ACSR (AIC_BASE + 0x018)
#define AIC_I2SSR (AIC_BASE + 0x01C)
#define AIC_ACCAR (AIC_BASE + 0x020)
#define AIC_ACCDR (AIC_BASE + 0x024)
#define AIC_ACSAR (AIC_BASE + 0x028)
#define AIC_ACSDR (AIC_BASE + 0x02C)
#define AIC_I2SDIV (AIC_BASE + 0x030)
#define AIC_DR (AIC_BASE + 0x034)
#define REG_AIC_FR REG32(AIC_FR)
#define REG_AIC_CR REG32(AIC_CR)
#define REG_AIC_ACCR1 REG32(AIC_ACCR1)
#define REG_AIC_ACCR2 REG32(AIC_ACCR2)
#define REG_AIC_I2SCR REG32(AIC_I2SCR)
#define REG_AIC_SR REG32(AIC_SR)
#define REG_AIC_ACSR REG32(AIC_ACSR)
#define REG_AIC_I2SSR REG32(AIC_I2SSR)
#define REG_AIC_ACCAR REG32(AIC_ACCAR)
#define REG_AIC_ACCDR REG32(AIC_ACCDR)
#define REG_AIC_ACSAR REG32(AIC_ACSAR)
#define REG_AIC_ACSDR REG32(AIC_ACSDR)
#define REG_AIC_I2SDIV REG32(AIC_I2SDIV)
#define REG_AIC_DR REG32(AIC_DR)
/* AIC Controller Configuration Register (AIC_FR) */
#define AIC_FR_RFTH_BIT 12 /* Receive FIFO Threshold */
#define AIC_FR_RFTH_MASK (0xf << AIC_FR_RFTH_BIT)
#define AIC_FR_TFTH_BIT 8 /* Transmit FIFO Threshold */
#define AIC_FR_TFTH_MASK (0xf << AIC_FR_TFTH_BIT)
#define AIC_FR_LSMP (1 << 6) /* Play Zero sample or last sample */
#define AIC_FR_ICDC (1 << 5) /* External(0) or Internal CODEC(1) */
#define AIC_FR_AUSEL (1 << 4) /* AC97(0) or I2S/MSB-justified(1) */
#define AIC_FR_RST (1 << 3) /* AIC registers reset */
#define AIC_FR_BCKD (1 << 2) /* I2S BIT_CLK direction, 0:input,1:output */
#define AIC_FR_SYNCD (1 << 1) /* I2S SYNC direction, 0:input,1:output */
#define AIC_FR_ENB (1 << 0) /* AIC enable bit */
/* AIC Controller Common Control Register (AIC_CR) */
#define AIC_CR_OSS_BIT 19 /* Output Sample Size from memory (AIC V2 only) */
#define AIC_CR_OSS_MASK (0x7 << AIC_CR_OSS_BIT)
#define AIC_CR_OSS_8BIT (0x0 << AIC_CR_OSS_BIT)
#define AIC_CR_OSS_16BIT (0x1 << AIC_CR_OSS_BIT)
#define AIC_CR_OSS_18BIT (0x2 << AIC_CR_OSS_BIT)
#define AIC_CR_OSS_20BIT (0x3 << AIC_CR_OSS_BIT)
#define AIC_CR_OSS_24BIT (0x4 << AIC_CR_OSS_BIT)
#define AIC_CR_ISS_BIT 16 /* Input Sample Size from memory (AIC V2 only) */
#define AIC_CR_ISS_MASK (0x7 << AIC_CR_ISS_BIT)
#define AIC_CR_ISS_8BIT (0x0 << AIC_CR_ISS_BIT)
#define AIC_CR_ISS_16BIT (0x1 << AIC_CR_ISS_BIT)
#define AIC_CR_ISS_18BIT (0x2 << AIC_CR_ISS_BIT)
#define AIC_CR_ISS_20BIT (0x3 << AIC_CR_ISS_BIT)
#define AIC_CR_ISS_24BIT (0x4 << AIC_CR_ISS_BIT)
#define AIC_CR_RDMS (1 << 15) /* Receive DMA enable */
#define AIC_CR_TDMS (1 << 14) /* Transmit DMA enable */
#define AIC_CR_M2S (1 << 11) /* Mono to Stereo enable */
#define AIC_CR_ENDSW (1 << 10) /* Endian switch enable */
#define AIC_CR_AVSTSU (1 << 9) /* Signed <-> Unsigned toggle enable */
#define AIC_CR_FLUSH (1 << 8) /* Flush FIFO */
#define AIC_CR_EROR (1 << 6) /* Enable ROR interrupt */
#define AIC_CR_ETUR (1 << 5) /* Enable TUR interrupt */
#define AIC_CR_ERFS (1 << 4) /* Enable RFS interrupt */
#define AIC_CR_ETFS (1 << 3) /* Enable TFS interrupt */
#define AIC_CR_ENLBF (1 << 2) /* Enable Loopback Function */
#define AIC_CR_ERPL (1 << 1) /* Enable Playback Function */
#define AIC_CR_EREC (1 << 0) /* Enable Record Function */
/* AIC Controller AC-link Control Register 1 (AIC_ACCR1) */
#define AIC_ACCR1_RS_BIT 16 /* Receive Valid Slots */
#define AIC_ACCR1_RS_MASK (0x3ff << AIC_ACCR1_RS_BIT)
#define AIC_ACCR1_RS_SLOT12 (1 << 25) /* Slot 12 valid bit */
#define AIC_ACCR1_RS_SLOT11 (1 << 24) /* Slot 11 valid bit */
#define AIC_ACCR1_RS_SLOT10 (1 << 23) /* Slot 10 valid bit */
#define AIC_ACCR1_RS_SLOT9 (1 << 22) /* Slot 9 valid bit, LFE */
#define AIC_ACCR1_RS_SLOT8 (1 << 21) /* Slot 8 valid bit, Surround Right */
#define AIC_ACCR1_RS_SLOT7 (1 << 20) /* Slot 7 valid bit, Surround Left */
#define AIC_ACCR1_RS_SLOT6 (1 << 19) /* Slot 6 valid bit, PCM Center */
#define AIC_ACCR1_RS_SLOT5 (1 << 18) /* Slot 5 valid bit */
#define AIC_ACCR1_RS_SLOT4 (1 << 17) /* Slot 4 valid bit, PCM Right */
#define AIC_ACCR1_RS_SLOT3 (1 << 16) /* Slot 3 valid bit, PCM Left */
#define AIC_ACCR1_XS_BIT 0 /* Transmit Valid Slots */
#define AIC_ACCR1_XS_MASK (0x3ff << AIC_ACCR1_XS_BIT)
#define AIC_ACCR1_XS_SLOT12 (1 << 9) /* Slot 12 valid bit */
#define AIC_ACCR1_XS_SLOT11 (1 << 8) /* Slot 11 valid bit */
#define AIC_ACCR1_XS_SLOT10 (1 << 7) /* Slot 10 valid bit */
#define AIC_ACCR1_XS_SLOT9 (1 << 6) /* Slot 9 valid bit, LFE */
#define AIC_ACCR1_XS_SLOT8 (1 << 5) /* Slot 8 valid bit, Surround Right */
#define AIC_ACCR1_XS_SLOT7 (1 << 4) /* Slot 7 valid bit, Surround Left */
#define AIC_ACCR1_XS_SLOT6 (1 << 3) /* Slot 6 valid bit, PCM Center */
#define AIC_ACCR1_XS_SLOT5 (1 << 2) /* Slot 5 valid bit */
#define AIC_ACCR1_XS_SLOT4 (1 << 1) /* Slot 4 valid bit, PCM Right */
#define AIC_ACCR1_XS_SLOT3 (1 << 0) /* Slot 3 valid bit, PCM Left */
/* AIC Controller AC-link Control Register 2 (AIC_ACCR2) */
#define AIC_ACCR2_ERSTO (1 << 18) /* Enable RSTO interrupt */
#define AIC_ACCR2_ESADR (1 << 17) /* Enable SADR interrupt */
#define AIC_ACCR2_ECADT (1 << 16) /* Enable CADT interrupt */
#define AIC_ACCR2_OASS_BIT 8 /* Output Sample Size for AC-link */
#define AIC_ACCR2_OASS_MASK (0x3 << AIC_ACCR2_OASS_BIT)
#define AIC_ACCR2_OASS_20BIT (0 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 20-bit */
#define AIC_ACCR2_OASS_18BIT (1 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 18-bit */
#define AIC_ACCR2_OASS_16BIT (2 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 16-bit */
#define AIC_ACCR2_OASS_8BIT (3 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 8-bit */
#define AIC_ACCR2_IASS_BIT 6 /* Output Sample Size for AC-link */
#define AIC_ACCR2_IASS_MASK (0x3 << AIC_ACCR2_IASS_BIT)
#define AIC_ACCR2_IASS_20BIT (0 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 20-bit */
#define AIC_ACCR2_IASS_18BIT (1 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 18-bit */
#define AIC_ACCR2_IASS_16BIT (2 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 16-bit */
#define AIC_ACCR2_IASS_8BIT (3 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 8-bit */
#define AIC_ACCR2_SO (1 << 3) /* SDATA_OUT output value */
#define AIC_ACCR2_SR (1 << 2) /* RESET# pin level */
#define AIC_ACCR2_SS (1 << 1) /* SYNC pin level */
#define AIC_ACCR2_SA (1 << 0) /* SYNC and SDATA_OUT alternation */
/* AIC Controller I2S/MSB-justified Control Register (AIC_I2SCR) */
#define AIC_I2SCR_STPBK (1 << 12) /* Stop BIT_CLK for I2S/MSB-justified */
#define AIC_I2SCR_WL_BIT 1 /* Input/Output Sample Size for I2S/MSB-justified */
#define AIC_I2SCR_WL_MASK (0x7 << AIC_I2SCR_WL_BIT)
#define AIC_I2SCR_WL_24BIT (0 << AIC_I2SCR_WL_BIT) /* Word Length is 24 bit */
#define AIC_I2SCR_WL_20BIT (1 << AIC_I2SCR_WL_BIT) /* Word Length is 20 bit */
#define AIC_I2SCR_WL_18BIT (2 << AIC_I2SCR_WL_BIT) /* Word Length is 18 bit */
#define AIC_I2SCR_WL_16BIT (3 << AIC_I2SCR_WL_BIT) /* Word Length is 16 bit */
#define AIC_I2SCR_WL_8BIT (4 << AIC_I2SCR_WL_BIT) /* Word Length is 8 bit */
#define AIC_I2SCR_AMSL (1 << 0) /* 0:I2S, 1:MSB-justified */
/* AIC Controller FIFO Status Register (AIC_SR) */
#define AIC_SR_RFL_BIT 24 /* Receive FIFO Level */
#define AIC_SR_RFL_MASK (0x3f << AIC_SR_RFL_BIT)
#define AIC_SR_TFL_BIT 8 /* Transmit FIFO level */
#define AIC_SR_TFL_MASK (0x3f << AIC_SR_TFL_BIT)
#define AIC_SR_ROR (1 << 6) /* Receive FIFO Overrun */
#define AIC_SR_TUR (1 << 5) /* Transmit FIFO Underrun */
#define AIC_SR_RFS (1 << 4) /* Receive FIFO Service Request */
#define AIC_SR_TFS (1 << 3) /* Transmit FIFO Service Request */
/* AIC Controller AC-link Status Register (AIC_ACSR) */
#define AIC_ACSR_SLTERR (1 << 21) /* Slot Error Flag */
#define AIC_ACSR_CRDY (1 << 20) /* External CODEC Ready Flag */
#define AIC_ACSR_CLPM (1 << 19) /* External CODEC low power mode flag */
#define AIC_ACSR_RSTO (1 << 18) /* External CODEC regs read status timeout */
#define AIC_ACSR_SADR (1 << 17) /* External CODEC regs status addr and data received */
#define AIC_ACSR_CADT (1 << 16) /* Command Address and Data Transmitted */
/* AIC Controller I2S/MSB-justified Status Register (AIC_I2SSR) */
#define AIC_I2SSR_BSY (1 << 2) /* AIC Busy in I2S/MSB-justified format */
/* AIC Controller AC97 codec Command Address Register (AIC_ACCAR) */
#define AIC_ACCAR_CAR_BIT 0
#define AIC_ACCAR_CAR_MASK (0xfffff << AIC_ACCAR_CAR_BIT)
/* AIC Controller AC97 codec Command Data Register (AIC_ACCDR) */
#define AIC_ACCDR_CDR_BIT 0
#define AIC_ACCDR_CDR_MASK (0xfffff << AIC_ACCDR_CDR_BIT)
/* AIC Controller AC97 codec Status Address Register (AIC_ACSAR) */
#define AIC_ACSAR_SAR_BIT 0
#define AIC_ACSAR_SAR_MASK (0xfffff << AIC_ACSAR_SAR_BIT)
/* AIC Controller AC97 codec Status Data Register (AIC_ACSDR) */
#define AIC_ACSDR_SDR_BIT 0
#define AIC_ACSDR_SDR_MASK (0xfffff << AIC_ACSDR_SDR_BIT)
/* AIC Controller I2S/MSB-justified Clock Divider Register (AIC_I2SDIV) */
#define AIC_I2SDIV_DIV_BIT 0
#define AIC_I2SDIV_DIV_MASK (0x7f << AIC_I2SDIV_DIV_BIT)
#define AIC_I2SDIV_BITCLK_3072KHZ (0x0C << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 3.072MHz */
#define AIC_I2SDIV_BITCLK_2836KHZ (0x0D << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 2.836MHz */
#define AIC_I2SDIV_BITCLK_1418KHZ (0x1A << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 1.418MHz */
#define AIC_I2SDIV_BITCLK_1024KHZ (0x24 << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 1.024MHz */
#define AIC_I2SDIV_BITCLK_7089KHZ (0x34 << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 708.92KHz */
#define AIC_I2SDIV_BITCLK_512KHZ (0x48 << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 512.00KHz */
/*************************************************************************
* ICDC (Internal CODEC)
*************************************************************************/
#define ICDC_CKCFG (ICDC_BASE + 0x00a0) /* Clock Configure Register */
#define ICDC_RGADW (ICDC_BASE + 0x00a4) /* internal register access control */
#define ICDC_RGDATA (ICDC_BASE + 0x00a8) /* internal register data output */
#define REG_ICDC_CKCFG REG32(ICDC_CKCFG)
#define REG_ICDC_RGADW REG32(ICDC_RGADW)
#define REG_ICDC_RGDATA REG32(ICDC_RGDATA)
/* ICDC Clock Configure Register */
#define ICDC_CKCFG_CKRDY (1 << 1)
#define ICDC_CKCFG_SELAD (1 << 0)
/* ICDC internal register access control Register */
#define ICDC_RGADW_RGWR (1 << 16)
#define ICDC_RGADW_RGADDR_BIT 8
#define ICDC_RGADW_RGADDR_MASK (0x7f << ICDC_RGADW_RGADDR_BIT)
#define ICDC_RGADW_RGDIN_BIT 0
#define ICDC_RGADW_RGDIN_MASK (0xff << ICDC_RGADW_RGDIN_BIT)
/* ICDC internal register data output Register */
#define ICDC_RGDATA_IRQ (1 << 8)
#define ICDC_RGDATA_RGDOUT_BIT 0
#define ICDC_RGDATA_RGDOUT_MASK (0xff << ICDC_RGDATA_RGDOUT_BIT)
/*************************************************************************
* PCM Controller
*************************************************************************/
#define PCM_CTL (PCM_BASE + 0x000)
#define PCM_CFG (PCM_BASE + 0x004)
#define PCM_DP (PCM_BASE + 0x008)
#define PCM_INTC (PCM_BASE + 0x00c)
#define PCM_INTS (PCM_BASE + 0x010)
#define PCM_DIV (PCM_BASE + 0x014)
#define REG_PCM_CTL REG32(PCM_CTL)
#define REG_PCM_CFG REG32(PCM_CFG)
#define REG_PCM_DP REG32(PCM_DP)
#define REG_PCM_INTC REG32(PCM_INTC)
#define REG_PCM_INTS REG32(PCM_INTS)
#define REG_PCM_DIV REG32(PCM_DIV)
/* PCM Controller control Register (PCM_CTL) */
#define PCM_CTL_ERDMA (1 << 9) /* Enable Receive DMA */
#define PCM_CTL_ETDMA (1 << 8) /* Enable Transmit DMA */
#define PCM_CTL_LSMP (1 << 7) /* Play Zero sample or last sample */
#define PCM_CTL_ERPL (1 << 6) /* Enable Playing Back Function */
#define PCM_CTL_EREC (1 << 5) /* Enable Recording Function */
#define PCM_CTL_FLUSH (1 << 4) /* FIFO flush */
#define PCM_CTL_RST (1 << 3) /* Reset PCM */
#define PCM_CTL_CLKEN (1 << 1) /* Enable the clock division logic */
#define PCM_CTL_PCMEN (1 << 0) /* Enable PCM module */
/* PCM Controller configure Register (PCM_CFG) */
#define PCM_CFG_SLOT_BIT 13
#define PCM_CFG_SLOT_MASK (0x3 << PCM_CFG_SLOT_BIT)
#define PCM_CFG_SLOT_0 (0 << PCM_CFG_SLOT_BIT) /* Slot is 0 */
#define PCM_CFG_SLOT_1 (1 << PCM_CFG_SLOT_BIT) /* Slot is 1 */
#define PCM_CFG_SLOT_2 (2 << PCM_CFG_SLOT_BIT) /* Slot is 2 */
#define PCM_CFG_SLOT_3 (3 << PCM_CFG_SLOT_BIT) /* Slot is 3 */
#define PCM_CFG_ISS_BIT 12
#define PCM_CFG_ISS_MASK (0x1 << PCM_CFG_ISS_BIT)
#define PCM_CFG_ISS_8 (0 << PCM_CFG_ISS_BIT)
#define PCM_CFG_ISS_16 (1 << PCM_CFG_ISS_BIT)
#define PCM_CFG_OSS_BIT 11
#define PCM_CFG_OSS_MASK (0x1 << PCM_CFG_OSS_BIT)
#define PCM_CFG_OSS_8 (0 << PCM_CFG_OSS_BIT)
#define PCM_CFG_OSS_16 (1 << PCM_CFG_OSS_BIT)
#define PCM_CFG_IMSBPOS (1 << 10)
#define PCM_CFG_OMSBPOS (1 << 9)
#define PCM_CFG_RFTH_BIT 5 /* Receive FIFO Threshold */
#define PCM_CFG_RFTH_MASK (0xf << PCM_CFG_RFTH_BIT)
#define PCM_CFG_TFTH_BIT 1 /* Transmit FIFO Threshold */
#define PCM_CFG_TFTH_MASK (0xf << PCM_CFG_TFTH_BIT)
#define PCM_CFG_MODE (0x0 << 0)
/* PCM Controller interrupt control Register (PCM_INTC) */
#define PCM_INTC_ETFS (1 << 3)
#define PCM_INTC_ETUR (1 << 2)
#define PCM_INTC_ERFS (1 << 1)
#define PCM_INTC_EROR (1 << 0)
/* PCM Controller interrupt status Register (PCM_INTS) */
#define PCM_INTS_RSTS (1 << 14) /* Reset or flush has not complete */
#define PCM_INTS_TFL_BIT 9
#define PCM_INTS_TFL_MASK (0x1f << PCM_INTS_TFL_BIT)
#define PCM_INTS_TFS (1 << 8) /* Tranmit FIFO Service Request */
#define PCM_INTS_TUR (1 << 7) /* Transmit FIFO Under Run */
#define PCM_INTS_RFL_BIT 2
#define PCM_INTS_RFL_MASK (0x1f << PCM_INTS_RFL_BIT)
#define PCM_INTS_RFS (1 << 1) /* Receive FIFO Service Request */
#define PCM_INTS_ROR (1 << 0) /* Receive FIFO Over Run */
/* PCM Controller clock division Register (PCM_DIV) */
#define PCM_DIV_SYNL_BIT 11
#define PCM_DIV_SYNL_MASK (0x3f << PCM_DIV_SYNL_BIT)
#define PCM_DIV_SYNDIV_BIT 6
#define PCM_DIV_SYNDIV_MASK (0x1f << PCM_DIV_SYNDIV_BIT)
#define PCM_DIV_CLKDIV_BIT 0
#define PCM_DIV_CLKDIV_MASK (0x3f << PCM_DIV_CLKDIV_BIT)
/*************************************************************************
* I2C
*************************************************************************/
#define I2C_DR (I2C0_BASE + 0x000)
#define I2C_CR (I2C0_BASE + 0x004)
#define I2C_SR (I2C0_BASE + 0x008)
#define I2C_GR (I2C0_BASE + 0x00C)
#define REG_I2C_DR REG8(I2C_DR)
#define REG_I2C_CR REG8(I2C_CR)
#define REG_I2C_SR REG8(I2C_SR)
#define REG_I2C_GR REG16(I2C_GR)
/* I2C Control Register (I2C_CR) */
#define I2C_CR_IEN (1 << 4)
#define I2C_CR_STA (1 << 3)
#define I2C_CR_STO (1 << 2)
#define I2C_CR_AC (1 << 1)
#define I2C_CR_I2CE (1 << 0)
/* I2C Status Register (I2C_SR) */
#define I2C_SR_STX (1 << 4)
#define I2C_SR_BUSY (1 << 3)
#define I2C_SR_TEND (1 << 2)
#define I2C_SR_DRF (1 << 1)
#define I2C_SR_ACKF (1 << 0)
/*************************************************************************
* SSI (Synchronous Serial Interface)
*************************************************************************/
/* n = 0, 1 (SSI0, SSI1) */
#define SSI_DR(n) (SSI0_BASE + 0x000 + (n)*0x2000)
#define SSI_CR0(n) (SSI0_BASE + 0x004 + (n)*0x2000)
#define SSI_CR1(n) (SSI0_BASE + 0x008 + (n)*0x2000)
#define SSI_SR(n) (SSI0_BASE + 0x00C + (n)*0x2000)
#define SSI_ITR(n) (SSI0_BASE + 0x010 + (n)*0x2000)
#define SSI_ICR(n) (SSI0_BASE + 0x014 + (n)*0x2000)
#define SSI_GR(n) (SSI0_BASE + 0x018 + (n)*0x2000)
#define REG_SSI_DR(n) REG32(SSI_DR(n))
#define REG_SSI_CR0(n) REG16(SSI_CR0(n))
#define REG_SSI_CR1(n) REG32(SSI_CR1(n))
#define REG_SSI_SR(n) REG32(SSI_SR(n))
#define REG_SSI_ITR(n) REG16(SSI_ITR(n))
#define REG_SSI_ICR(n) REG8(SSI_ICR(n))
#define REG_SSI_GR(n) REG16(SSI_GR(n))
/* SSI Data Register (SSI_DR) */
#define SSI_DR_GPC_BIT 0
#define SSI_DR_GPC_MASK (0x1ff << SSI_DR_GPC_BIT)
#define SSI_MAX_FIFO_ENTRIES 128 /* 128 txfifo and 128 rxfifo */
/* SSI Control Register 0 (SSI_CR0) */
#define SSI_CR0_SSIE (1 << 15)
#define SSI_CR0_TIE (1 << 14)
#define SSI_CR0_RIE (1 << 13)
#define SSI_CR0_TEIE (1 << 12)
#define SSI_CR0_REIE (1 << 11)
#define SSI_CR0_LOOP (1 << 10)
#define SSI_CR0_RFINE (1 << 9)
#define SSI_CR0_RFINC (1 << 8)
#define SSI_CR0_EACLRUN (1 << 7) /* hardware auto clear underrun when TxFifo no empty */
#define SSI_CR0_FSEL (1 << 6)
#define SSI_CR0_TFLUSH (1 << 2)
#define SSI_CR0_RFLUSH (1 << 1)
#define SSI_CR0_DISREV (1 << 0)
/* SSI Control Register 1 (SSI_CR1) */
#define SSI_CR1_FRMHL_BIT 30
#define SSI_CR1_FRMHL_MASK (0x3 << SSI_CR1_FRMHL_BIT)
#define SSI_CR1_FRMHL_CELOW_CE2LOW (0 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is low valid and SSI_CE2_ is low valid */
#define SSI_CR1_FRMHL_CEHIGH_CE2LOW (1 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is high valid and SSI_CE2_ is low valid */
#define SSI_CR1_FRMHL_CELOW_CE2HIGH (2 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is low valid and SSI_CE2_ is high valid */
#define SSI_CR1_FRMHL_CEHIGH_CE2HIGH (3 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is high valid and SSI_CE2_ is high valid */
#define SSI_CR1_TFVCK_BIT 28
#define SSI_CR1_TFVCK_MASK (0x3 << SSI_CR1_TFVCK_BIT)
#define SSI_CR1_TFVCK_0 (0 << SSI_CR1_TFVCK_BIT)
#define SSI_CR1_TFVCK_1 (1 << SSI_CR1_TFVCK_BIT)
#define SSI_CR1_TFVCK_2 (2 << SSI_CR1_TFVCK_BIT)
#define SSI_CR1_TFVCK_3 (3 << SSI_CR1_TFVCK_BIT)
#define SSI_CR1_TCKFI_BIT 26
#define SSI_CR1_TCKFI_MASK (0x3 << SSI_CR1_TCKFI_BIT)
#define SSI_CR1_TCKFI_0 (0 << SSI_CR1_TCKFI_BIT)
#define SSI_CR1_TCKFI_1 (1 << SSI_CR1_TCKFI_BIT)
#define SSI_CR1_TCKFI_2 (2 << SSI_CR1_TCKFI_BIT)
#define SSI_CR1_TCKFI_3 (3 << SSI_CR1_TCKFI_BIT)
#define SSI_CR1_LFST (1 << 25)
#define SSI_CR1_ITFRM (1 << 24)
#define SSI_CR1_UNFIN (1 << 23)
#define SSI_CR1_MULTS (1 << 22)
#define SSI_CR1_FMAT_BIT 20
#define SSI_CR1_FMAT_MASK (0x3 << SSI_CR1_FMAT_BIT)
#define SSI_CR1_FMAT_SPI (0 << SSI_CR1_FMAT_BIT) /* Motorola¡¯s SPI format */
#define SSI_CR1_FMAT_SSP (1 << SSI_CR1_FMAT_BIT) /* TI's SSP format */
#define SSI_CR1_FMAT_MW1 (2 << SSI_CR1_FMAT_BIT) /* National Microwire 1 format */
#define SSI_CR1_FMAT_MW2 (3 << SSI_CR1_FMAT_BIT) /* National Microwire 2 format */
#define SSI_CR1_TTRG_BIT 16 /* SSI1 TX trigger */
#define SSI_CR1_TTRG_MASK (0xf << SSI_CR1_TTRG_BIT)
#define SSI_CR1_MCOM_BIT 12
#define SSI_CR1_MCOM_MASK (0xf << SSI_CR1_MCOM_BIT)
#define SSI_CR1_MCOM_1BIT (0x0 << SSI_CR1_MCOM_BIT) /* 1-bit command selected */
#define SSI_CR1_MCOM_2BIT (0x1 << SSI_CR1_MCOM_BIT) /* 2-bit command selected */
#define SSI_CR1_MCOM_3BIT (0x2 << SSI_CR1_MCOM_BIT) /* 3-bit command selected */
#define SSI_CR1_MCOM_4BIT (0x3 << SSI_CR1_MCOM_BIT) /* 4-bit command selected */
#define SSI_CR1_MCOM_5BIT (0x4 << SSI_CR1_MCOM_BIT) /* 5-bit command selected */
#define SSI_CR1_MCOM_6BIT (0x5 << SSI_CR1_MCOM_BIT) /* 6-bit command selected */
#define SSI_CR1_MCOM_7BIT (0x6 << SSI_CR1_MCOM_BIT) /* 7-bit command selected */
#define SSI_CR1_MCOM_8BIT (0x7 << SSI_CR1_MCOM_BIT) /* 8-bit command selected */
#define SSI_CR1_MCOM_9BIT (0x8 << SSI_CR1_MCOM_BIT) /* 9-bit command selected */
#define SSI_CR1_MCOM_10BIT (0x9 << SSI_CR1_MCOM_BIT) /* 10-bit command selected */
#define SSI_CR1_MCOM_11BIT (0xA << SSI_CR1_MCOM_BIT) /* 11-bit command selected */
#define SSI_CR1_MCOM_12BIT (0xB << SSI_CR1_MCOM_BIT) /* 12-bit command selected */
#define SSI_CR1_MCOM_13BIT (0xC << SSI_CR1_MCOM_BIT) /* 13-bit command selected */
#define SSI_CR1_MCOM_14BIT (0xD << SSI_CR1_MCOM_BIT) /* 14-bit command selected */
#define SSI_CR1_MCOM_15BIT (0xE << SSI_CR1_MCOM_BIT) /* 15-bit command selected */
#define SSI_CR1_MCOM_16BIT (0xF << SSI_CR1_MCOM_BIT) /* 16-bit command selected */
#define SSI_CR1_RTRG_BIT 8 /* SSI RX trigger */
#define SSI_CR1_RTRG_MASK (0xf << SSI_CR1_RTRG_BIT)
#define SSI_CR1_FLEN_BIT 4
#define SSI_CR1_FLEN_MASK (0xf << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_2BIT (0x0 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_3BIT (0x1 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_4BIT (0x2 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_5BIT (0x3 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_6BIT (0x4 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_7BIT (0x5 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_8BIT (0x6 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_9BIT (0x7 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_10BIT (0x8 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_11BIT (0x9 << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_12BIT (0xA << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_13BIT (0xB << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_14BIT (0xC << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_15BIT (0xD << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_16BIT (0xE << SSI_CR1_FLEN_BIT)
#define SSI_CR1_FLEN_17BIT (0xF << SSI_CR1_FLEN_BIT)
#define SSI_CR1_PHA (1 << 1)
#define SSI_CR1_POL (1 << 0)
/* SSI Status Register (SSI_SR) */
#define SSI_SR_TFIFONUM_BIT 16
#define SSI_SR_TFIFONUM_MASK (0xff << SSI_SR_TFIFONUM_BIT)
#define SSI_SR_RFIFONUM_BIT 8
#define SSI_SR_RFIFONUM_MASK (0xff << SSI_SR_RFIFONUM_BIT)
#define SSI_SR_END (1 << 7)
#define SSI_SR_BUSY (1 << 6)
#define SSI_SR_TFF (1 << 5)
#define SSI_SR_RFE (1 << 4)
#define SSI_SR_TFHE (1 << 3)
#define SSI_SR_RFHF (1 << 2)
#define SSI_SR_UNDR (1 << 1)
#define SSI_SR_OVER (1 << 0)
/* SSI Interval Time Control Register (SSI_ITR) */
#define SSI_ITR_CNTCLK (1 << 15)
#define SSI_ITR_IVLTM_BIT 0
#define SSI_ITR_IVLTM_MASK (0x7fff << SSI_ITR_IVLTM_BIT)
/*************************************************************************
* MSC
************************************************************************/
/* n = 0, 1 (MSC0, MSC1) */
#define MSC_STRPCL(n) (MSC0_BASE + (n)*0x1000 + 0x000)
#define MSC_STAT(n) (MSC0_BASE + (n)*0x1000 + 0x004)
#define MSC_CLKRT(n) (MSC0_BASE + (n)*0x1000 + 0x008)
#define MSC_CMDAT(n) (MSC0_BASE + (n)*0x1000 + 0x00C)
#define MSC_RESTO(n) (MSC0_BASE + (n)*0x1000 + 0x010)
#define MSC_RDTO(n) (MSC0_BASE + (n)*0x1000 + 0x014)
#define MSC_BLKLEN(n) (MSC0_BASE + (n)*0x1000 + 0x018)
#define MSC_NOB(n) (MSC0_BASE + (n)*0x1000 + 0x01C)
#define MSC_SNOB(n) (MSC0_BASE + (n)*0x1000 + 0x020)
#define MSC_IMASK(n) (MSC0_BASE + (n)*0x1000 + 0x024)
#define MSC_IREG(n) (MSC0_BASE + (n)*0x1000 + 0x028)
#define MSC_CMD(n) (MSC0_BASE + (n)*0x1000 + 0x02C)
#define MSC_ARG(n) (MSC0_BASE + (n)*0x1000 + 0x030)
#define MSC_RES(n) (MSC0_BASE + (n)*0x1000 + 0x034)
#define MSC_RXFIFO(n) (MSC0_BASE + (n)*0x1000 + 0x038)
#define MSC_TXFIFO(n) (MSC0_BASE + (n)*0x1000 + 0x03C)
#define MSC_LPM(n) (MSC0_BASE + (n)*0x1000 + 0x040)
#define REG_MSC_STRPCL(n) REG16(MSC_STRPCL(n))
#define REG_MSC_STAT(n) REG32(MSC_STAT(n))
#define REG_MSC_CLKRT(n) REG16(MSC_CLKRT(n))
#define REG_MSC_CMDAT(n) REG32(MSC_CMDAT(n))
#define REG_MSC_RESTO(n) REG16(MSC_RESTO(n))
#define REG_MSC_RDTO(n) REG16(MSC_RDTO(n))
#define REG_MSC_BLKLEN(n) REG16(MSC_BLKLEN(n))
#define REG_MSC_NOB(n) REG16(MSC_NOB(n))
#define REG_MSC_SNOB(n) REG16(MSC_SNOB(n))
#define REG_MSC_IMASK(n) REG32(MSC_IMASK(n))
#define REG_MSC_IREG(n) REG16(MSC_IREG(n))
#define REG_MSC_CMD(n) REG8(MSC_CMD(n))
#define REG_MSC_ARG(n) REG32(MSC_ARG(n))
#define REG_MSC_RES(n) REG16(MSC_RES(n))
#define REG_MSC_RXFIFO(n) REG32(MSC_RXFIFO(n))
#define REG_MSC_TXFIFO(n) REG32(MSC_TXFIFO(n))
#define REG_MSC_LPM(n) REG32(MSC_LPM(n))
/* MSC Clock and Control Register (MSC_STRPCL) */
#define MSC_STRPCL_SEND_CCSD (1 << 15) /*send command completion signal disable to ceata */
#define MSC_STRPCL_SEND_AS_CCSD (1 << 14) /*send internally generated stop after sending ccsd */
#define MSC_STRPCL_EXIT_MULTIPLE (1 << 7)
#define MSC_STRPCL_EXIT_TRANSFER (1 << 6)
#define MSC_STRPCL_START_READWAIT (1 << 5)
#define MSC_STRPCL_STOP_READWAIT (1 << 4)
#define MSC_STRPCL_RESET (1 << 3)
#define MSC_STRPCL_START_OP (1 << 2)
#define MSC_STRPCL_CLOCK_CONTROL_BIT 0
#define MSC_STRPCL_CLOCK_CONTROL_MASK (0x3 << MSC_STRPCL_CLOCK_CONTROL_BIT)
#define MSC_STRPCL_CLOCK_CONTROL_STOP (0x1 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Stop MMC/SD clock */
#define MSC_STRPCL_CLOCK_CONTROL_START (0x2 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Start MMC/SD clock */
/* MSC Status Register (MSC_STAT) */
#define MSC_STAT_AUTO_CMD_DONE (1 << 31) /*12 is internally generated by controller has finished */
#define MSC_STAT_IS_RESETTING (1 << 15)
#define MSC_STAT_SDIO_INT_ACTIVE (1 << 14)
#define MSC_STAT_PRG_DONE (1 << 13)
#define MSC_STAT_DATA_TRAN_DONE (1 << 12)
#define MSC_STAT_END_CMD_RES (1 << 11)
#define MSC_STAT_DATA_FIFO_AFULL (1 << 10)
#define MSC_STAT_IS_READWAIT (1 << 9)
#define MSC_STAT_CLK_EN (1 << 8)
#define MSC_STAT_DATA_FIFO_FULL (1 << 7)
#define MSC_STAT_DATA_FIFO_EMPTY (1 << 6)
#define MSC_STAT_CRC_RES_ERR (1 << 5)
#define MSC_STAT_CRC_READ_ERROR (1 << 4)
#define MSC_STAT_CRC_WRITE_ERROR_BIT 2
#define MSC_STAT_CRC_WRITE_ERROR_MASK (0x3 << MSC_STAT_CRC_WRITE_ERROR_BIT)
#define MSC_STAT_CRC_WRITE_ERROR_NO (0 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No error on transmission of data */
#define MSC_STAT_CRC_WRITE_ERROR (1 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* Card observed erroneous transmission of data */
#define MSC_STAT_CRC_WRITE_ERROR_NOSTS (2 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No CRC status is sent back */
#define MSC_STAT_TIME_OUT_RES (1 << 1)
#define MSC_STAT_TIME_OUT_READ (1 << 0)
/* MSC Bus Clock Control Register (MSC_CLKRT) */
#define MSC_CLKRT_CLK_RATE_BIT 0
#define MSC_CLKRT_CLK_RATE_MASK (0x7 << MSC_CLKRT_CLK_RATE_BIT)
#define MSC_CLKRT_CLK_RATE_DIV_1 (0x0 << MSC_CLKRT_CLK_RATE_BIT) /* CLK_SRC */
#define MSC_CLKRT_CLK_RATE_DIV_2 (0x1 << MSC_CLKRT_CLK_RATE_BIT) /* 1/2 of CLK_SRC */
#define MSC_CLKRT_CLK_RATE_DIV_4 (0x2 << MSC_CLKRT_CLK_RATE_BIT) /* 1/4 of CLK_SRC */
#define MSC_CLKRT_CLK_RATE_DIV_8 (0x3 << MSC_CLKRT_CLK_RATE_BIT) /* 1/8 of CLK_SRC */
#define MSC_CLKRT_CLK_RATE_DIV_16 (0x4 << MSC_CLKRT_CLK_RATE_BIT) /* 1/16 of CLK_SRC */
#define MSC_CLKRT_CLK_RATE_DIV_32 (0x5 << MSC_CLKRT_CLK_RATE_BIT) /* 1/32 of CLK_SRC */
#define MSC_CLKRT_CLK_RATE_DIV_64 (0x6 << MSC_CLKRT_CLK_RATE_BIT) /* 1/64 of CLK_SRC */
#define MSC_CLKRT_CLK_RATE_DIV_128 (0x7 << MSC_CLKRT_CLK_RATE_BIT) /* 1/128 of CLK_SRC */
/* MSC Command Sequence Control Register (MSC_CMDAT) */
#define MSC_CMDAT_CCS_EXPECTED (1 << 31) /* interrupts are enabled in ce-ata */
#define MSC_CMDAT_READ_CEATA (1 << 30)
#define MSC_CMDAT_SDIO_PRDT (1 << 17) /* exact 2 cycle */
#define MSC_CMDAT_SEND_AS_STOP (1 << 16)
#define MSC_CMDAT_RTRG_BIT 14
#define MSC_CMDAT_RTRG_EQUALT_8 (0x0 << MSC_CMDAT_RTRG_BIT)
#define MSC_CMDAT_RTRG_EQUALT_16 (0x1 << MSC_CMDAT_RTRG_BIT) /* reset value */
#define MSC_CMDAT_RTRG_EQUALT_24 (0x2 << MSC_CMDAT_RTRG_BIT)
#define MSC_CMDAT_TTRG_BIT 12
#define MSC_CMDAT_TTRG_LESS_8 (0x0 << MSC_CMDAT_TTRG_BIT)
#define MSC_CMDAT_TTRG_LESS_16 (0x1 << MSC_CMDAT_TTRG_BIT) /*reset value */
#define MSC_CMDAT_TTRG_LESS_24 (0x2 << MSC_CMDAT_TTRG_BIT)
#define MSC_CMDAT_STOP_ABORT (1 << 11)
#define MSC_CMDAT_BUS_WIDTH_BIT 9
#define MSC_CMDAT_BUS_WIDTH_MASK (0x3 << MSC_CMDAT_BUS_WIDTH_BIT)
#define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << MSC_CMDAT_BUS_WIDTH_BIT) /* 1-bit data bus */
#define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << MSC_CMDAT_BUS_WIDTH_BIT) /* 4-bit data bus */
#define MSC_CMDAT_BUS_WIDTH_8BIT (0x3 << MSC_CMDAT_BUS_WIDTH_BIT) /* 8-bit data bus */
#define MSC_CMDAT_DMA_EN (1 << 8)
#define MSC_CMDAT_INIT (1 << 7)
#define MSC_CMDAT_BUSY (1 << 6)
#define MSC_CMDAT_STREAM_BLOCK (1 << 5)
#define MSC_CMDAT_WRITE (1 << 4)
#define MSC_CMDAT_READ (0 << 4)
#define MSC_CMDAT_DATA_EN (1 << 3)
#define MSC_CMDAT_RESPONSE_BIT 0
#define MSC_CMDAT_RESPONSE_MASK (0x7 << MSC_CMDAT_RESPONSE_BIT)
#define MSC_CMDAT_RESPONSE_NONE (0x0 << MSC_CMDAT_RESPONSE_BIT) /* No response */
#define MSC_CMDAT_RESPONSE_R1 (0x1 << MSC_CMDAT_RESPONSE_BIT) /* Format R1 and R1b */
#define MSC_CMDAT_RESPONSE_R2 (0x2 << MSC_CMDAT_RESPONSE_BIT) /* Format R2 */
#define MSC_CMDAT_RESPONSE_R3 (0x3 << MSC_CMDAT_RESPONSE_BIT) /* Format R3 */
#define MSC_CMDAT_RESPONSE_R4 (0x4 << MSC_CMDAT_RESPONSE_BIT) /* Format R4 */
#define MSC_CMDAT_RESPONSE_R5 (0x5 << MSC_CMDAT_RESPONSE_BIT) /* Format R5 */
#define MSC_CMDAT_RESPONSE_R6 (0x6 << MSC_CMDAT_RESPONSE_BIT) /* Format R6 */
#define CMDAT_DMA_EN (1 << 8)
#define CMDAT_INIT (1 << 7)
#define CMDAT_BUSY (1 << 6)
#define CMDAT_STREAM (1 << 5)
#define CMDAT_WRITE (1 << 4)
#define CMDAT_DATA_EN (1 << 3)
/* MSC Interrupts Mask Register (MSC_IMASK) */
#define MSC_IMASK_AUTO_CMD_DONE (1 << 8)
#define MSC_IMASK_SDIO (1 << 7)
#define MSC_IMASK_TXFIFO_WR_REQ (1 << 6)
#define MSC_IMASK_RXFIFO_RD_REQ (1 << 5)
#define MSC_IMASK_END_CMD_RES (1 << 2)
#define MSC_IMASK_PRG_DONE (1 << 1)
#define MSC_IMASK_DATA_TRAN_DONE (1 << 0)
/* MSC Interrupts Status Register (MSC_IREG) */
#define MSC_IREG_AUTO_CMD_DONE (1 << 8)
#define MSC_IREG_SDIO (1 << 7)
#define MSC_IREG_TXFIFO_WR_REQ (1 << 6)
#define MSC_IREG_RXFIFO_RD_REQ (1 << 5)
#define MSC_IREG_END_CMD_RES (1 << 2)
#define MSC_IREG_PRG_DONE (1 << 1)
#define MSC_IREG_DATA_TRAN_DONE (1 << 0)
/* MSC Low Power Mode Register (MSC_LPM) */
#define MSC_SET_LPM (1 << 0)
/*************************************************************************
* EMC (External Memory Controller)
*************************************************************************/
#define EMC_BCR (EMC_BASE + 0x00) /* Bus Control Register */
#define EMC_SMCR0 (EMC_BASE + 0x10) /* Static Memory Control Register 0 */
#define EMC_SMCR1 (EMC_BASE + 0x14) /* Static Memory Control Register 1 */
#define EMC_SMCR2 (EMC_BASE + 0x18) /* Static Memory Control Register 2 */
#define EMC_SMCR3 (EMC_BASE + 0x1c) /* Static Memory Control Register 3 */
#define EMC_SMCR4 (EMC_BASE + 0x20) /* Static Memory Control Register 4 */
#define EMC_SACR0 (EMC_BASE + 0x30) /* Static Memory Bank 0 Addr Config Reg */
#define EMC_SACR1 (EMC_BASE + 0x34) /* Static Memory Bank 1 Addr Config Reg */
#define EMC_SACR2 (EMC_BASE + 0x38) /* Static Memory Bank 2 Addr Config Reg */
#define EMC_SACR3 (EMC_BASE + 0x3c) /* Static Memory Bank 3 Addr Config Reg */
#define EMC_SACR4 (EMC_BASE + 0x40) /* Static Memory Bank 4 Addr Config Reg */
#define EMC_NFCSR (EMC_BASE + 0x050) /* NAND Flash Control/Status Register */
#define EMC_DMCR (EMC_BASE + 0x80) /* DRAM Control Register */
#define EMC_RTCSR (EMC_BASE + 0x84) /* Refresh Time Control/Status Register */
#define EMC_RTCNT (EMC_BASE + 0x88) /* Refresh Timer Counter */
#define EMC_RTCOR (EMC_BASE + 0x8c) /* Refresh Time Constant Register */
#define EMC_DMAR0 (EMC_BASE + 0x90) /* SDRAM Bank 0 Addr Config Register */
#define EMC_DMAR1 (EMC_BASE + 0x94) /* SDRAM Bank 1 Addr Config Register */
#define EMC_SDMR0 (EMC_BASE + 0xa000) /* Mode Register of SDRAM bank 0 */
#define REG_EMC_BCR REG32(EMC_BCR)
#define REG_EMC_SMCR0 REG32(EMC_SMCR0)
#define REG_EMC_SMCR1 REG32(EMC_SMCR1)
#define REG_EMC_SMCR2 REG32(EMC_SMCR2)
#define REG_EMC_SMCR3 REG32(EMC_SMCR3)
#define REG_EMC_SMCR4 REG32(EMC_SMCR4)
#define REG_EMC_SACR0 REG32(EMC_SACR0)
#define REG_EMC_SACR1 REG32(EMC_SACR1)
#define REG_EMC_SACR2 REG32(EMC_SACR2)
#define REG_EMC_SACR3 REG32(EMC_SACR3)
#define REG_EMC_SACR4 REG32(EMC_SACR4)
#define REG_EMC_NFCSR REG32(EMC_NFCSR)
#define REG_EMC_DMCR REG32(EMC_DMCR)
#define REG_EMC_RTCSR REG16(EMC_RTCSR)
#define REG_EMC_RTCNT REG16(EMC_RTCNT)
#define REG_EMC_RTCOR REG16(EMC_RTCOR)
#define REG_EMC_DMAR0 REG32(EMC_DMAR0)
#define REG_EMC_DMAR1 REG32(EMC_DMAR1)
/* Bus Control Register */
#define EMC_BCR_BT_SEL_BIT 30
#define EMC_BCR_BT_SEL_MASK (0x3 << EMC_BCR_BT_SEL_BIT)
#define EMC_BCR_PK_SEL (1 << 24)
#define EMC_BCR_BSR_MASK (1 << 2) /* Nand and SDRAM Bus Share Select: 0, share; 1, unshare */
#define EMC_BCR_BSR_SHARE (0 << 2)
#define EMC_BCR_BSR_UNSHARE (1 << 2)
#define EMC_BCR_BRE (1 << 1)
#define EMC_BCR_ENDIAN (1 << 0)
/* Static Memory Control Register */
#define EMC_SMCR_STRV_BIT 24
#define EMC_SMCR_STRV_MASK (0x0f << EMC_SMCR_STRV_BIT)
#define EMC_SMCR_TAW_BIT 20
#define EMC_SMCR_TAW_MASK (0x0f << EMC_SMCR_TAW_BIT)
#define EMC_SMCR_TBP_BIT 16
#define EMC_SMCR_TBP_MASK (0x0f << EMC_SMCR_TBP_BIT)
#define EMC_SMCR_TAH_BIT 12
#define EMC_SMCR_TAH_MASK (0x07 << EMC_SMCR_TAH_BIT)
#define EMC_SMCR_TAS_BIT 8
#define EMC_SMCR_TAS_MASK (0x07 << EMC_SMCR_TAS_BIT)
#define EMC_SMCR_BW_BIT 6
#define EMC_SMCR_BW_MASK (0x03 << EMC_SMCR_BW_BIT)
#define EMC_SMCR_BW_8BIT (0 << EMC_SMCR_BW_BIT)
#define EMC_SMCR_BW_16BIT (1 << EMC_SMCR_BW_BIT)
#define EMC_SMCR_BW_32BIT (2 << EMC_SMCR_BW_BIT)
#define EMC_SMCR_BCM (1 << 3)
#define EMC_SMCR_BL_BIT 1
#define EMC_SMCR_BL_MASK (0x03 << EMC_SMCR_BL_BIT)
#define EMC_SMCR_BL_4 (0 << EMC_SMCR_BL_BIT)
#define EMC_SMCR_BL_8 (1 << EMC_SMCR_BL_BIT)
#define EMC_SMCR_BL_16 (2 << EMC_SMCR_BL_BIT)
#define EMC_SMCR_BL_32 (3 << EMC_SMCR_BL_BIT)
#define EMC_SMCR_SMT (1 << 0)
/* Static Memory Bank Addr Config Reg */
#define EMC_SACR_BASE_BIT 8
#define EMC_SACR_BASE_MASK (0xff << EMC_SACR_BASE_BIT)
#define EMC_SACR_MASK_BIT 0
#define EMC_SACR_MASK_MASK (0xff << EMC_SACR_MASK_BIT)
/* NAND Flash Control/Status Register */
#define EMC_NFCSR_NFCE4 (1 << 7) /* NAND Flash Enable */
#define EMC_NFCSR_NFE4 (1 << 6) /* NAND Flash FCE# Assertion Enable */
#define EMC_NFCSR_NFCE3 (1 << 5)
#define EMC_NFCSR_NFE3 (1 << 4)
#define EMC_NFCSR_NFCE2 (1 << 3)
#define EMC_NFCSR_NFE2 (1 << 2)
#define EMC_NFCSR_NFCE1 (1 << 1)
#define EMC_NFCSR_NFE1 (1 << 0)
/* DRAM Control Register */
#define EMC_DMCR_BW_BIT 31
#define EMC_DMCR_BW (1 << EMC_DMCR_BW_BIT)
#define EMC_DMCR_CA_BIT 26
#define EMC_DMCR_CA_MASK (0x07 << EMC_DMCR_CA_BIT)
#define EMC_DMCR_CA_8 (0 << EMC_DMCR_CA_BIT)
#define EMC_DMCR_CA_9 (1 << EMC_DMCR_CA_BIT)
#define EMC_DMCR_CA_10 (2 << EMC_DMCR_CA_BIT)
#define EMC_DMCR_CA_11 (3 << EMC_DMCR_CA_BIT)
#define EMC_DMCR_CA_12 (4 << EMC_DMCR_CA_BIT)
#define EMC_DMCR_RMODE (1 << 25)
#define EMC_DMCR_RFSH (1 << 24)
#define EMC_DMCR_MRSET (1 << 23)
#define EMC_DMCR_RA_BIT 20
#define EMC_DMCR_RA_MASK (0x03 << EMC_DMCR_RA_BIT)
#define EMC_DMCR_RA_11 (0 << EMC_DMCR_RA_BIT)
#define EMC_DMCR_RA_12 (1 << EMC_DMCR_RA_BIT)
#define EMC_DMCR_RA_13 (2 << EMC_DMCR_RA_BIT)
#define EMC_DMCR_BA_BIT 19
#define EMC_DMCR_BA (1 << EMC_DMCR_BA_BIT)
#define EMC_DMCR_PDM (1 << 18)
#define EMC_DMCR_EPIN (1 << 17)
#define EMC_DMCR_MBSEL (1 << 16)
#define EMC_DMCR_TRAS_BIT 13
#define EMC_DMCR_TRAS_MASK (0x07 << EMC_DMCR_TRAS_BIT)
#define EMC_DMCR_RCD_BIT 11
#define EMC_DMCR_RCD_MASK (0x03 << EMC_DMCR_RCD_BIT)
#define EMC_DMCR_TPC_BIT 8
#define EMC_DMCR_TPC_MASK (0x07 << EMC_DMCR_TPC_BIT)
#define EMC_DMCR_TRWL_BIT 5
#define EMC_DMCR_TRWL_MASK (0x03 << EMC_DMCR_TRWL_BIT)
#define EMC_DMCR_TRC_BIT 2
#define EMC_DMCR_TRC_MASK (0x07 << EMC_DMCR_TRC_BIT)
#define EMC_DMCR_TCL_BIT 0
#define EMC_DMCR_TCL_MASK (0x03 << EMC_DMCR_TCL_BIT)
/* Refresh Time Control/Status Register */
#define EMC_RTCSR_SFR (1 << 8) /* self refresh flag */
#define EMC_RTCSR_CMF (1 << 7)
#define EMC_RTCSR_CKS_BIT 0
#define EMC_RTCSR_CKS_MASK (0x07 << EMC_RTCSR_CKS_BIT)
#define EMC_RTCSR_CKS_DISABLE (0 << EMC_RTCSR_CKS_BIT)
#define EMC_RTCSR_CKS_4 (1 << EMC_RTCSR_CKS_BIT)
#define EMC_RTCSR_CKS_16 (2 << EMC_RTCSR_CKS_BIT)
#define EMC_RTCSR_CKS_64 (3 << EMC_RTCSR_CKS_BIT)
#define EMC_RTCSR_CKS_256 (4 << EMC_RTCSR_CKS_BIT)
#define EMC_RTCSR_CKS_1024 (5 << EMC_RTCSR_CKS_BIT)
#define EMC_RTCSR_CKS_2048 (6 << EMC_RTCSR_CKS_BIT)
#define EMC_RTCSR_CKS_4096 (7 << EMC_RTCSR_CKS_BIT)
/* SDRAM Bank Address Configuration Register */
#define EMC_DMAR_BASE_BIT 8
#define EMC_DMAR_BASE_MASK (0xff << EMC_DMAR_BASE_BIT)
#define EMC_DMAR_MASK_BIT 0
#define EMC_DMAR_MASK_MASK (0xff << EMC_DMAR_MASK_BIT)
/* Mode Register of SDRAM bank 0 */
#define EMC_SDMR_BM (1 << 9) /* Write Burst Mode */
#define EMC_SDMR_OM_BIT 7 /* Operating Mode */
#define EMC_SDMR_OM_MASK (3 << EMC_SDMR_OM_BIT)
#define EMC_SDMR_OM_NORMAL (0 << EMC_SDMR_OM_BIT)
#define EMC_SDMR_CAS_BIT 4 /* CAS Latency */
#define EMC_SDMR_CAS_MASK (7 << EMC_SDMR_CAS_BIT)
#define EMC_SDMR_CAS_1 (1 << EMC_SDMR_CAS_BIT)
#define EMC_SDMR_CAS_2 (2 << EMC_SDMR_CAS_BIT)
#define EMC_SDMR_CAS_3 (3 << EMC_SDMR_CAS_BIT)
#define EMC_SDMR_BT_BIT 3 /* Burst Type */
#define EMC_SDMR_BT_MASK (1 << EMC_SDMR_BT_BIT)
#define EMC_SDMR_BT_SEQ (0 << EMC_SDMR_BT_BIT) /* Sequential */
#define EMC_SDMR_BT_INT (1 << EMC_SDMR_BT_BIT) /* Interleave */
#define EMC_SDMR_BL_BIT 0 /* Burst Length */
#define EMC_SDMR_BL_MASK (7 << EMC_SDMR_BL_BIT)
#define EMC_SDMR_BL_1 (0 << EMC_SDMR_BL_BIT)
#define EMC_SDMR_BL_2 (1 << EMC_SDMR_BL_BIT)
#define EMC_SDMR_BL_4 (2 << EMC_SDMR_BL_BIT)
#define EMC_SDMR_BL_8 (3 << EMC_SDMR_BL_BIT)
#define EMC_SDMR_CAS2_16BIT \
(EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2)
#define EMC_SDMR_CAS2_32BIT \
(EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4)
#define EMC_SDMR_CAS3_16BIT \
(EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2)
#define EMC_SDMR_CAS3_32BIT \
(EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4)
/*************************************************************************
* DDRC (DDR Controller)
*************************************************************************/
#define DDRC_ST (DDRC_BASE + 0x0) /* DDR Status Register */
#define DDRC_CFG (DDRC_BASE + 0x4) /* DDR Configure Register */
#define DDRC_CTRL (DDRC_BASE + 0x8) /* DDR Control Register */
#define DDRC_LMR (DDRC_BASE + 0xc) /* DDR Load-Mode-Register */
#define DDRC_TIMING1 (DDRC_BASE + 0x10) /* DDR Timing Config Register 1 */
#define DDRC_TIMING2 (DDRC_BASE + 0x14) /* DDR Timing Config Register 2 */
#define DDRC_REFCNT (DDRC_BASE + 0x18) /* DDR Auto-Refresh Counter */
#define DDRC_DQS (DDRC_BASE + 0x1c) /* DDR DQS Delay Control Register */
#define DDRC_DQS_ADJ (DDRC_BASE + 0x20) /* DDR DQS Delay Adjust Register */
#define DDRC_MMAP0 (DDRC_BASE + 0x24) /* DDR Memory Map Config Register */
#define DDRC_MMAP1 (DDRC_BASE + 0x28) /* DDR Memory Map Config Register */
/* DDRC Register */
#define REG_DDRC_ST REG32(DDRC_ST)
#define REG_DDRC_CFG REG32(DDRC_CFG)
#define REG_DDRC_CTRL REG32(DDRC_CTRL)
#define REG_DDRC_LMR REG32(DDRC_LMR)
#define REG_DDRC_TIMING1 REG32(DDRC_TIMING1)
#define REG_DDRC_TIMING2 REG32(DDRC_TIMING2)
#define REG_DDRC_REFCNT REG32(DDRC_REFCNT)
#define REG_DDRC_DQS REG32(DDRC_DQS)
#define REG_DDRC_DQS_ADJ REG32(DDRC_DQS_ADJ)
#define REG_DDRC_MMAP0 REG32(DDRC_MMAP0)
#define REG_DDRC_MMAP1 REG32(DDRC_MMAP1)
/* DDRC Status Register */
#define DDRC_ST_ENDIAN (1 << 7) /* 0 Little data endian
1 Big data endian */
#define DDRC_ST_DPDN (1 << 5) /* 0 DDR memory is NOT in deep-power-down state
1 DDR memory is in deep-power-down state */
#define DDRC_ST_PDN (1 << 4) /* 0 DDR memory is NOT in power-down state
1 DDR memory is in power-down state */
#define DDRC_ST_AREF (1 << 3) /* 0 DDR memory is NOT in auto-refresh state
1 DDR memory is in auto-refresh state */
#define DDRC_ST_SREF (1 << 2) /* 0 DDR memory is NOT in self-refresh state
1 DDR memory is in self-refresh state */
#define DDRC_ST_CKE1 (1 << 1) /* 0 CKE1 Pin is low
1 CKE1 Pin is high */
#define DDRC_ST_CKE0 (1 << 0) /* 0 CKE0 Pin is low
1 CKE0 Pin is high */
/* DDRC Configure Register */
#define DDRC_CFG_MSEL_BIT 16 /* Mask delay select */
#define DDRC_CFG_MSEL_MASK (0x3 << DDRC_CFG_MSEL_BIT)
#define DDRC_CFG_MSEL_0 (0 << DDRC_CFG_MSEL_BIT) /* 00 No delay */
#define DDRC_CFG_MSEL_1 (1 << DDRC_CFG_MSEL_BIT) /* 01 delay 1 tCK */
#define DDRC_CFG_MSEL_2 (2 << DDRC_CFG_MSEL_BIT) /* 10 delay 2 tCK */
#define DDRC_CFG_MSEL_3 (3 << DDRC_CFG_MSEL_BIT) /* 11 delay 3 tCK */
#define DDRC_CFG_HL (1 << 15) /* 0: no extra delay 1: one extra half tCK delay */
#define DDRC_CFG_ROW1_BIT 27 /* Row Address width. */
#define DDRC_CFG_COL1_BIT 25 /* Row Address width. */
#define DDRC_CFG_BA1_BIT (1 << 24)
#define DDRC_CFG_IMBA_BIT (1 << 23)
#define DDRC_CFG_BTRUN (1 << 21)
#define DDRC_CFG_TYPE_BIT 12
#define DDRC_CFG_TYPE_MASK (0x7 << DDRC_CFG_TYPE_BIT)
#define DDRC_CFG_TYPE_DDR1 (2 << DDRC_CFG_TYPE_BIT)
#define DDRC_CFG_TYPE_MDDR (3 << DDRC_CFG_TYPE_BIT)
#define DDRC_CFG_TYPE_DDR2 (4 << DDRC_CFG_TYPE_BIT)
#define DDRC_CFG_ROW_BIT 10 /* Row Address width. */
#define DDRC_CFG_ROW_MASK (0x3 << DDRC_CFG_ROW_BIT)
#define DDRC_CFG_ROW_13 (0 << DDRC_CFG_ROW_BIT) /* 13-bit row address is used */
#define DDRC_CFG_ROW_14 (1 << DDRC_CFG_ROW_BIT) /* 14-bit row address is used */
#define DDRC_CFG_COL_BIT 8 /* Column Address width.
Specify the Column address width of external DDR. */
#define DDRC_CFG_COL_MASK (0x3 << DDRC_CFG_COL_BIT)
#define DDRC_CFG_COL_9 (0 << DDRC_CFG_COL_BIT) /* 9-bit Column address is used */
#define DDRC_CFG_COL_10 (1 << DDRC_CFG_COL_BIT) /* 10-bit Column address is used */
#define DDRC_CFG_CS1EN (1 << 7) /* 0 DDR Pin CS1 un-used
1 There're DDR memory connected to CS1 */
#define DDRC_CFG_CS0EN (1 << 6) /* 0 DDR Pin CS0 un-used
1 There're DDR memory connected to CS0 */
#define DDRC_CFG_TSEL_BIT 18 /* Read delay select */
#define DDRC_CFG_TSEL_MASK (0x3 << DDRC_CFG_TSEL_BIT)
#define DDRC_CFG_TSEL_0 (0 << DDRC_CFG_TSEL_BIT) /* No delay */
#define DDRC_CFG_TSEL_1 (1 << DDRC_CFG_TSEL_BIT) /* delay 1 tCK */
#define DDRC_CFG_TSEL_2 (2 << DDRC_CFG_TSEL_BIT) /* delay 2 tCK */
#define DDRC_CFG_TSEL_3 (3 << DDRC_CFG_TSEL_BIT) /* delay 3 tCK */
#define DDRC_CFG_CL_BIT 2 /* CAS Latency */
#define DDRC_CFG_CL_MASK (0xf << DDRC_CFG_CL_BIT)
#define DDRC_CFG_CL_3 (0 << DDRC_CFG_CL_BIT) /* CL = 3 tCK */
#define DDRC_CFG_CL_4 (1 << DDRC_CFG_CL_BIT) /* CL = 4 tCK */
#define DDRC_CFG_CL_5 (2 << DDRC_CFG_CL_BIT) /* CL = 5 tCK */
#define DDRC_CFG_CL_6 (3 << DDRC_CFG_CL_BIT) /* CL = 6 tCK */
#define DDRC_CFG_BA (1 << 1) /* 0 4 bank device, Pin ba[1:0] valid, ba[2] un-used
1 8 bank device, Pin ba[2:0] valid*/
#define DDRC_CFG_DW (1 << 0) /*0 External memory data width is 16-bit
1 External memory data width is 32-bit */
/* DDRC Control Register */
#define DDRC_CTRL_ACTPD (1 << 15) /* 0 Precharge all banks before entering power-down
1 Do not precharge banks before entering power-down */
#define DDRC_CTRL_PDT_BIT 12 /* Power-Down Timer */
#define DDRC_CTRL_PDT_MASK (0x7 << DDRC_CTRL_PDT_BIT)
#define DDRC_CTRL_PDT_DIS (0 << DDRC_CTRL_PDT_BIT) /* power-down disabled */
#define DDRC_CTRL_PDT_8 (1 << DDRC_CTRL_PDT_BIT) /* Enter power-down after 8 tCK idle */
#define DDRC_CTRL_PDT_16 (2 << DDRC_CTRL_PDT_BIT) /* Enter power-down after 16 tCK idle */
#define DDRC_CTRL_PDT_32 (3 << DDRC_CTRL_PDT_BIT) /* Enter power-down after 32 tCK idle */
#define DDRC_CTRL_PDT_64 (4 << DDRC_CTRL_PDT_BIT) /* Enter power-down after 64 tCK idle */
#define DDRC_CTRL_PDT_128 (5 << DDRC_CTRL_PDT_BIT) /* Enter power-down after 128 tCK idle */
#define DDRC_CTRL_PRET_BIT 8 /* Precharge Timer */
#define DDRC_CTRL_PRET_MASK (0x7 << DDRC_CTRL_PRET_BIT) /* */
#define DDRC_CTRL_PRET_DIS (0 << DDRC_CTRL_PRET_BIT) /* PRET function Disabled */
#define DDRC_CTRL_PRET_8 (1 << DDRC_CTRL_PRET_BIT) /* Precharge active bank after 8 tCK idle */
#define DDRC_CTRL_PRET_16 (2 << DDRC_CTRL_PRET_BIT) /* Precharge active bank after 16 tCK idle */
#define DDRC_CTRL_PRET_32 (3 << DDRC_CTRL_PRET_BIT) /* Precharge active bank after 32 tCK idle */
#define DDRC_CTRL_PRET_64 (4 << DDRC_CTRL_PRET_BIT) /* Precharge active bank after 64 tCK idle */
#define DDRC_CTRL_PRET_128 (5 << DDRC_CTRL_PRET_BIT) /* Precharge active bank after 128 tCK idle */
#define DDRC_CTRL_SR (1 << 5) /* 1 Drive external DDR device entering self-refresh mode
0 Drive external DDR device exiting self-refresh mode */
#define DDRC_CTRL_UNALIGN (1 << 4) /* 0 Disable unaligned transfer on AXI BUS
1 Enable unaligned transfer on AXI BUS */
#define DDRC_CTRL_ALH (1 << 3) /* Advanced Latency Hiding:
0 Disable ALH
1 Enable ALH */
#define DDRC_CTRL_RDC (1 << 2) /* 0 dclk clock frequency is lower than 60MHz
1 dclk clock frequency is higher than 60MHz */
#define DDRC_CTRL_CKE (1 << 1) /* 0 Not set CKE Pin High
1 Set CKE Pin HIGH */
#define DDRC_CTRL_RESET (1 << 0) /* 0 End resetting ddrc_controller
1 Resetting ddrc_controller */
/* DDRC Load-Mode-Register */
#define DDRC_LMR_DDR_ADDR_BIT 16 /* When performing a DDR command, DDRC_ADDR[13:0]
corresponding to external DDR address Pin A[13:0] */
#define DDRC_LMR_DDR_ADDR_MASK (0xff << DDRC_LMR_DDR_ADDR_BIT)
#define DDRC_LMR_BA_BIT 8 /* When performing a DDR command, BA[2:0]
corresponding to external DDR address Pin BA[2:0]. */
#define DDRC_LMR_BA_MASK (0x7 << DDRC_LMR_BA_BIT)
/* For DDR2 */
#define DDRC_LMR_BA_MRS (0 << DDRC_LMR_BA_BIT) /* Mode Register set */
#define DDRC_LMR_BA_EMRS1 (1 << DDRC_LMR_BA_BIT) /* Extended Mode Register1 set */
#define DDRC_LMR_BA_EMRS2 (2 << DDRC_LMR_BA_BIT) /* Extended Mode Register2 set */
#define DDRC_LMR_BA_EMRS3 (3 << DDRC_LMR_BA_BIT) /* Extended Mode Register3 set */
/* For mobile DDR */
#define DDRC_LMR_BA_M_MRS (0 << DDRC_LMR_BA_BIT) /* Mode Register set */
#define DDRC_LMR_BA_M_EMRS (2 << DDRC_LMR_BA_BIT) /* Extended Mode Register set */
#define DDRC_LMR_BA_M_SR (1 << DDRC_LMR_BA_BIT) /* Status Register set */
#define DDRC_LMR_CMD_BIT 4
#define DDRC_LMR_CMD_MASK (0x3 << DDRC_LMR_CMD_BIT)
#define DDRC_LMR_CMD_PREC (0 << DDRC_LMR_CMD_BIT)/* Precharge one bank/All banks */
#define DDRC_LMR_CMD_AUREF (1 << DDRC_LMR_CMD_BIT)/* Auto-Refresh */
#define DDRC_LMR_CMD_LMR (2 << DDRC_LMR_CMD_BIT)/* Load Mode Register */
#define DDRC_LMR_START (1 << 0) /* 0 No command is performed
1 On the posedge of START, perform a command
defined by CMD field */
/* DDRC Mode Register Set */
#define DDR_MRS_PD_BIT (1 << 10) /* Active power down exit time */
#define DDR_MRS_PD_MASK (1 << DDR_MRS_PD_BIT)
#define DDR_MRS_PD_FAST_EXIT (0 << 10)
#define DDR_MRS_PD_SLOW_EXIT (1 << 10)
#define DDR_MRS_WR_BIT (1 << 9) /* Write Recovery for autoprecharge */
#define DDR_MRS_WR_MASK (7 << DDR_MRS_WR_BIT)
#define DDR_MRS_DLL_RST (1 << 8) /* DLL Reset */
#define DDR_MRS_TM_BIT 7 /* Operating Mode */
#define DDR_MRS_TM_MASK (1 << DDR_MRS_OM_BIT)
#define DDR_MRS_TM_NORMAL (0 << DDR_MRS_OM_BIT)
#define DDR_MRS_TM_TEST (1 << DDR_MRS_OM_BIT)
#define DDR_MRS_CAS_BIT 4 /* CAS Latency */
#define DDR_MRS_CAS_MASK (7 << DDR_MRS_CAS_BIT)
#define DDR_MRS_BT_BIT 3 /* Burst Type */
#define DDR_MRS_BT_MASK (1 << DDR_MRS_BT_BIT)
#define DDR_MRS_BT_SEQ (0 << DDR_MRS_BT_BIT) /* Sequential */
#define DDR_MRS_BT_INT (1 << DDR_MRS_BT_BIT) /* Interleave */
#define DDR_MRS_BL_BIT 0 /* Burst Length */
#define DDR_MRS_BL_MASK (7 << DDR_MRS_BL_BIT)
#define DDR_MRS_BL_4 (2 << DDR_MRS_BL_BIT)
#define DDR_MRS_BL_8 (3 << DDR_MRS_BL_BIT)
/* DDRC Extended Mode Register1 Set */
#define DDR_EMRS1_QOFF (1<<12) /* 0 Output buffer enabled
1 Output buffer disabled */
#define DDR_EMRS1_RDQS_EN (1<<11) /* 0 Disable
1 Enable */
#define DDR_EMRS1_DQS_DIS (1<<10) /* 0 Enable
1 Disable */
#define DDR_EMRS1_OCD_BIT 7 /* Additive Latency 0 -> 6 */
#define DDR_EMRS1_OCD_MASK (0x7 << DDR_EMRS1_OCD_BIT)
#define DDR_EMRS1_OCD_EXIT (0 << DDR_EMRS1_OCD_BIT)
#define DDR_EMRS1_OCD_D0 (1 << DDR_EMRS1_OCD_BIT)
#define DDR_EMRS1_OCD_D1 (2 << DDR_EMRS1_OCD_BIT)
#define DDR_EMRS1_OCD_ADJ (4 << DDR_EMRS1_OCD_BIT)
#define DDR_EMRS1_OCD_DFLT (7 << DDR_EMRS1_OCD_BIT)
#define DDR_EMRS1_AL_BIT 3 /* Additive Latency 0 -> 6 */
#define DDR_EMRS1_AL_MASK (7 << DDR_EMRS1_AL_BIT)
#define DDR_EMRS1_RTT_BIT 2 /* */
#define DDR_EMRS1_RTT_MASK (0x11 << DDR_EMRS1_DIC_BIT) /* Bit 6, Bit 2 */
#define DDR_EMRS1_DIC_BIT 1 /* Output Driver Impedence Control */
#define DDR_EMRS1_DIC_MASK (1 << DDR_EMRS1_DIC_BIT) /* 100% */
#define DDR_EMRS1_DIC_NORMAL (0 << DDR_EMRS1_DIC_BIT) /* 60% */
#define DDR_EMRS1_DIC_HALF (1 << DDR_EMRS1_DIC_BIT)
#define DDR_EMRS1_DLL_BIT 0 /* DLL Enable */
#define DDR_EMRS1_DLL_MASK (1 << DDR_EMRS1_DLL_BIT)
#define DDR_EMRS1_DLL_EN (0 << DDR_EMRS1_DLL_BIT)
#define DDR_EMRS1_DLL_DIS (1 << DDR_EMRS1_DLL_BIT)
/* Mobile SDRAM Extended Mode Register */
#define DDR_EMRS_DS_BIT 5 /* Driver strength */
#define DDR_EMRS_DS_MASK (7 << DDR_EMRS_DS_BIT)
#define DDR_EMRS_DS_FULL (0 << DDR_EMRS_DS_BIT) /*Full*/
#define DDR_EMRS_DS_HALF (1 << DDR_EMRS_DS_BIT) /*1/2 Strength*/
#define DDR_EMRS_DS_QUTR (2 << DDR_EMRS_DS_BIT) /*1/4 Strength*/
#define DDR_EMRS_DS_OCTANT (3 << DDR_EMRS_DS_BIT) /*1/8 Strength*/
#define DDR_EMRS_DS_QUTR3 (4 << DDR_EMRS_DS_BIT) /*3/4 Strength*/
#define DDR_EMRS_PRSR_BIT 0 /* Partial Array Self Refresh */
#define DDR_EMRS_PRSR_MASK (7 << DDR_EMRS_PRSR_BIT)
#define DDR_EMRS_PRSR_ALL (0 << DDR_EMRS_PRSR_BIT) /*All Banks*/
#define DDR_EMRS_PRSR_HALF_TL (1 << DDR_EMRS_PRSR_BIT) /*Half of Total Bank*/
#define DDR_EMRS_PRSR_QUTR_TL (2 << DDR_EMRS_PRSR_BIT) /*Quarter of Total Bank*/
#define DDR_EMRS_PRSR_HALF_B0 (5 << DDR_EMRS_PRSR_BIT) /*Half of Bank0*/
#define DDR_EMRS_PRSR_QUTR_B0 (6 << DDR_EMRS_PRSR_BIT) /*Quarter of Bank0*/
/* DDRC Timing Config Register 1 */
#define DDRC_TIMING1_TRAS_BIT 28 /* ACTIVE to PRECHARGE command period (2 * tRAS + 1) */
#define DDRC_TIMING1_TRAS_MASK (0xf << DDRC_TIMING1_TRAS_BIT)
#define DDRC_TIMING1_TRTP_BIT 24 /* READ to PRECHARGE command period. */
#define DDRC_TIMING1_TRTP_MASK (0x3 << DDRC_TIMING1_TRTP_BIT)
#define DDRC_TIMING1_TRP_BIT 20 /* PRECHARGE command period. */
#define DDRC_TIMING1_TRP_MASK (0x7 << DDRC_TIMING1_TRP_BIT)
#define DDRC_TIMING1_TRCD_BIT 16 /* ACTIVE to READ or WRITE command period. */
#define DDRC_TIMING1_TRCD_MASK (0x7 << DDRC_TIMING1_TRCD_BIT)
#define DDRC_TIMING1_TRC_BIT 12 /* ACTIVE to ACTIVE command period. */
#define DDRC_TIMING1_TRC_MASK (0xf << DDRC_TIMING1_TRC_BIT)
#define DDRC_TIMING1_TRRD_BIT 8 /* ACTIVE bank A to ACTIVE bank B command period. */
#define DDRC_TIMING1_TRRD_MASK (0x3 << DDRC_TIMING1_TRRD_BIT)
#define DDRC_TIMING1_TRRD_DISABLE (0 << DDRC_TIMING1_TRRD_BIT)
#define DDRC_TIMING1_TRRD_2 (1 << DDRC_TIMING1_TRRD_BIT)
#define DDRC_TIMING1_TRRD_3 (2 << DDRC_TIMING1_TRRD_BIT)
#define DDRC_TIMING1_TRRD_4 (3 << DDRC_TIMING1_TRRD_BIT)
#define DDRC_TIMING1_TWR_BIT 4 /* WRITE Recovery Time defined by register MR of DDR2 memory */
#define DDRC_TIMING1_TWR_MASK (0x7 << DDRC_TIMING1_TWR_BIT)
#define DDRC_TIMING1_TWR_1 (0 << DDRC_TIMING1_TWR_BIT)
#define DDRC_TIMING1_TWR_2 (1 << DDRC_TIMING1_TWR_BIT)
#define DDRC_TIMING1_TWR_3 (2 << DDRC_TIMING1_TWR_BIT)
#define DDRC_TIMING1_TWR_4 (3 << DDRC_TIMING1_TWR_BIT)
#define DDRC_TIMING1_TWR_5 (4 << DDRC_TIMING1_TWR_BIT)
#define DDRC_TIMING1_TWR_6 (5 << DDRC_TIMING1_TWR_BIT)
#define DDRC_TIMING1_TWTR_BIT 0 /* WRITE to READ command delay. */
#define DDRC_TIMING1_TWTR_MASK (0x3 << DDRC_TIMING1_TWTR_BIT)
#define DDRC_TIMING1_TWTR_1 (0 << DDRC_TIMING1_TWTR_BIT)
#define DDRC_TIMING1_TWTR_2 (1 << DDRC_TIMING1_TWTR_BIT)
#define DDRC_TIMING1_TWTR_3 (2 << DDRC_TIMING1_TWTR_BIT)
#define DDRC_TIMING1_TWTR_4 (3 << DDRC_TIMING1_TWTR_BIT)
/* DDRC Timing Config Register 2 */
#define DDRC_TIMING2_TRFC_BIT 12 /* AUTO-REFRESH command period. */
#define DDRC_TIMING2_TRFC_MASK (0xf << DDRC_TIMING2_TRFC_BIT)
#define DDRC_TIMING2_TMINSR_BIT 8 /* Minimum Self-Refresh / Deep-Power-Down time */
#define DDRC_TIMING2_TMINSR_MASK (0xf << DDRC_TIMING2_TMINSR_BIT)
#define DDRC_TIMING2_TXP_BIT 4 /* EXIT-POWER-DOWN to next valid command period. */
#define DDRC_TIMING2_TXP_MASK (0x7 << DDRC_TIMING2_TXP_BIT)
#define DDRC_TIMING2_TMRD_BIT 0 /* Load-Mode-Register to next valid command period. */
#define DDRC_TIMING2_TMRD_MASK (0x3 << DDRC_TIMING2_TMRD_BIT)
/* DDRC Auto-Refresh Counter */
#define DDRC_REFCNT_CON_BIT 16 /* Constant value used to compare with CNT value. */
#define DDRC_REFCNT_CON_MASK (0xff << DDRC_REFCNT_CON_BIT)
#define DDRC_REFCNT_CNT_BIT 8 /* 8-bit counter */
#define DDRC_REFCNT_CNT_MASK (0xff << DDRC_REFCNT_CNT_BIT)
#define DDRC_REFCNT_CLKDIV_BIT 1 /* Clock Divider for auto-refresh counter. */
#define DDRC_REFCNT_CLKDIV_MASK (0x7 << DDRC_REFCNT_CLKDIV_BIT)
#define DDRC_REFCNT_REF_EN (1 << 0) /* Enable Refresh Counter */
/* DDRC DQS Delay Control Register */
#define DDRC_DQS_ERROR (1 << 29) /* ahb_clk Delay Detect ERROR, read-only. */
#define DDRC_DQS_READY (1 << 28) /* ahb_clk Delay Detect READY, read-only. */
#define DDRC_DQS_AUTO (1 << 23) /* Hardware auto-detect & set delay line */
#define DDRC_DQS_DET (1 << 24) /* Start delay detecting. */
#define DDRC_DQS_CLKD_BIT 16 /* CLKD is reference value for setting WDQS and RDQS.*/
#define DDRC_DQS_CLKD_MASK (0x7f << DDRC_DQS_CLKD_BIT)
#define DDRC_DQS_WDQS_BIT 8 /* Set delay element number to write DQS delay-line. */
#define DDRC_DQS_WDQS_MASK (0x3f << DDRC_DQS_WDQS_BIT)
#define DDRC_DQS_RDQS_BIT 0 /* Set delay element number to read DQS delay-line. */
#define DDRC_DQS_RDQS_MASK (0x3f << DDRC_DQS_RDQS_BIT)
/* DDRC DQS Delay Adjust Register */
#define DDRC_DQS_ADJWDQS_BIT 8 /* The adjust value for WRITE DQS delay */
#define DDRC_DQS_ADJWDQS_MASK (0x1f << DDRC_DQS_ADJWDQS_BIT)
#define DDRC_DQS_ADJRDQS_BIT 0 /* The adjust value for READ DQS delay */
#define DDRC_DQS_ADJRDQS_MASK (0x1f << DDRC_DQS_ADJRDQS_BIT)
/* DDRC Memory Map Config Register */
#define DDRC_MMAP_BASE_BIT 8 /* base address */
#define DDRC_MMAP_BASE_MASK (0xff << DDRC_MMAP_BASE_BIT)
#define DDRC_MMAP_MASK_BIT 0 /* address mask */
#define DDRC_MMAP_MASK_MASK (0xff << DDRC_MMAP_MASK_BIT)
#define DDRC_MMAP0_BASE (0x20 << DDRC_MMAP_BASE_BIT)
#define DDRC_MMAP1_BASE_64M (0x24 << DDRC_MMAP_BASE_BIT) /*when bank0 is 128M*/
#define DDRC_MMAP1_BASE_128M (0x28 << DDRC_MMAP_BASE_BIT) /*when bank0 is 128M*/
#define DDRC_MMAP1_BASE_256M (0x30 << DDRC_MMAP_BASE_BIT) /*when bank0 is 128M*/
#define DDRC_MMAP_MASK_64_64 (0xfc << DDRC_MMAP_MASK_BIT) /*mask for two 128M SDRAM*/
#define DDRC_MMAP_MASK_128_128 (0xf8 << DDRC_MMAP_MASK_BIT) /*mask for two 128M SDRAM*/
#define DDRC_MMAP_MASK_256_256 (0xf0 << DDRC_MMAP_MASK_BIT) /*mask for two 128M SDRAM*/
/*************************************************************************
* CIM
*************************************************************************/
#define CIM_CFG (CIM_BASE + 0x0000)
#define CIM_CTRL (CIM_BASE + 0x0004)
#define CIM_STATE (CIM_BASE + 0x0008)
#define CIM_IID (CIM_BASE + 0x000C)
#define CIM_RXFIFO (CIM_BASE + 0x0010)
#define CIM_DA (CIM_BASE + 0x0020)
#define CIM_FA (CIM_BASE + 0x0024)
#define CIM_FID (CIM_BASE + 0x0028)
#define CIM_CMD (CIM_BASE + 0x002C)
#define CIM_SIZE (CIM_BASE + 0x0030)
#define CIM_OFFSET (CIM_BASE + 0x0034)
#define CIM_RAM_ADDR (CIM_BASE + 0x1000)
#define REG_CIM_CFG REG32(CIM_CFG)
#define REG_CIM_CTRL REG32(CIM_CTRL)
#define REG_CIM_STATE REG32(CIM_STATE)
#define REG_CIM_IID REG32(CIM_IID)
#define REG_CIM_RXFIFO REG32(CIM_RXFIFO)
#define REG_CIM_DA REG32(CIM_DA)
#define REG_CIM_FA REG32(CIM_FA)
#define REG_CIM_FID REG32(CIM_FID)
#define REG_CIM_CMD REG32(CIM_CMD)
#define REG_CIM_SIZE REG32(CIM_SIZE)
#define REG_CIM_OFFSET REG32(CIM_OFFSET)
#define CIM_CFG_ORDER_BIT 18
#define CIM_CFG_ORDER_MASK (0x3 << CIM_CFG_ORDER_BIT)
#define CIM_CFG_ORDER_0 (0x0 << CIM_CFG_ORDER_BIT) /* Y0CbY1Cr; YCbCr */
#define CIM_CFG_ORDER_1 (0x1 << CIM_CFG_ORDER_BIT) /* Y0CrY1Cb; YCrCb */
#define CIM_CFG_ORDER_2 (0x2 << CIM_CFG_ORDER_BIT) /* CbY0CrY1; CbCrY */
#define CIM_CFG_ORDER_3 (0x3 << CIM_CFG_ORDER_BIT) /* CrY0CbY1; CrCbY */
#define CIM_CFG_DF_BIT 16
#define CIM_CFG_DF_MASK (0x3 << CIM_CFG_DF_BIT)
#define CIM_CFG_DF_YUV444 (0x1 << CIM_CFG_DF_BIT) /* YCbCr444 */
#define CIM_CFG_DF_YUV422 (0x2 << CIM_CFG_DF_BIT) /* YCbCr422 */
#define CIM_CFG_DF_ITU656 (0x3 << CIM_CFG_DF_BIT) /* ITU656 YCbCr422 */
#define CIM_CFG_INV_DAT (1 << 15)
#define CIM_CFG_VSP (1 << 14) /* VSYNC Polarity:0-rising edge active,1-falling edge active */
#define CIM_CFG_HSP (1 << 13) /* HSYNC Polarity:0-rising edge active,1-falling edge active */
#define CIM_CFG_PCP (1 << 12) /* PCLK working edge: 0-rising, 1-falling */
#define CIM_CFG_DMA_BURST_TYPE_BIT 10
#define CIM_CFG_DMA_BURST_TYPE_MASK (0x3 << CIM_CFG_DMA_BURST_TYPE_BIT)
#define CIM_CFG_DMA_BURST_INCR4 (0 << CIM_CFG_DMA_BURST_TYPE_BIT)
#define CIM_CFG_DMA_BURST_INCR8 (1 << CIM_CFG_DMA_BURST_TYPE_BIT) /* Suggested */
#define CIM_CFG_DMA_BURST_INCR16 (2 << CIM_CFG_DMA_BURST_TYPE_BIT) /* Suggested High speed AHB*/
#define CIM_CFG_DUMMY_ZERO (1 << 9)
#define CIM_CFG_EXT_VSYNC (1 << 8) /* Only for ITU656 Progressive mode */
#define CIM_CFG_PACK_BIT 4
#define CIM_CFG_PACK_MASK (0x7 << CIM_CFG_PACK_BIT)
#define CIM_CFG_PACK_0 (0 << CIM_CFG_PACK_BIT) /* 11 22 33 44 0xY0CbY1Cr */
#define CIM_CFG_PACK_1 (1 << CIM_CFG_PACK_BIT) /* 22 33 44 11 0xCbY1CrY0 */
#define CIM_CFG_PACK_2 (2 << CIM_CFG_PACK_BIT) /* 33 44 11 22 0xY1CrY0Cb */
#define CIM_CFG_PACK_3 (3 << CIM_CFG_PACK_BIT) /* 44 11 22 33 0xCrY0CbY1 */
#define CIM_CFG_PACK_4 (4 << CIM_CFG_PACK_BIT) /* 44 33 22 11 0xCrY1CbY0 */
#define CIM_CFG_PACK_5 (5 << CIM_CFG_PACK_BIT) /* 33 22 11 44 0xY1CbY0Cr */
#define CIM_CFG_PACK_6 (6 << CIM_CFG_PACK_BIT) /* 22 11 44 33 0xCbY0CrY1 */
#define CIM_CFG_PACK_7 (7 << CIM_CFG_PACK_BIT) /* 11 44 33 22 0xY0CrY1Cb */
#define CIM_CFG_BYPASS_BIT 2
#define CIM_CFG_BYPASS_MASK (1 << CIM_CFG_BYPASS_BIT)
#define CIM_CFG_BYPASS (1 << CIM_CFG_BYPASS_BIT)
#define CIM_CFG_DSM_BIT 0
#define CIM_CFG_DSM_MASK (0x3 << CIM_CFG_DSM_BIT)
#define CIM_CFG_DSM_CPM (0 << CIM_CFG_DSM_BIT) /* CCIR656 Progressive Mode */
#define CIM_CFG_DSM_CIM (1 << CIM_CFG_DSM_BIT) /* CCIR656 Interlace Mode */
#define CIM_CFG_DSM_GCM (2 << CIM_CFG_DSM_BIT) /* Gated Clock Mode */
/* CIM Control Register (CIM_CTRL) */
#define CIM_CTRL_EEOF_LINE_BIT 20
#define CIM_CTRL_EEOF_LINE_MASK (0xfff << CIM_CTRL_EEOF_LINE_BIT)
#define CIM_CTRL_FRC_BIT 16
#define CIM_CTRL_FRC_MASK (0xf << CIM_CTRL_FRC_BIT)
#define CIM_CTRL_FRC_1 (0x0 << CIM_CTRL_FRC_BIT) /* Sample every frame */
#define CIM_CTRL_FRC_2 (0x1 << CIM_CTRL_FRC_BIT) /* Sample 1/2 frame */
#define CIM_CTRL_FRC_3 (0x2 << CIM_CTRL_FRC_BIT) /* Sample 1/3 frame */
#define CIM_CTRL_FRC_4 (0x3 << CIM_CTRL_FRC_BIT) /* Sample 1/4 frame */
#define CIM_CTRL_FRC_5 (0x4 << CIM_CTRL_FRC_BIT) /* Sample 1/5 frame */
#define CIM_CTRL_FRC_6 (0x5 << CIM_CTRL_FRC_BIT) /* Sample 1/6 frame */
#define CIM_CTRL_FRC_7 (0x6 << CIM_CTRL_FRC_BIT) /* Sample 1/7 frame */
#define CIM_CTRL_FRC_8 (0x7 << CIM_CTRL_FRC_BIT) /* Sample 1/8 frame */
#define CIM_CTRL_FRC_9 (0x8 << CIM_CTRL_FRC_BIT) /* Sample 1/9 frame */
#define CIM_CTRL_FRC_10 (0x9 << CIM_CTRL_FRC_BIT) /* Sample 1/10 frame */
#define CIM_CTRL_FRC_11 (0xA << CIM_CTRL_FRC_BIT) /* Sample 1/11 frame */
#define CIM_CTRL_FRC_12 (0xB << CIM_CTRL_FRC_BIT) /* Sample 1/12 frame */
#define CIM_CTRL_FRC_13 (0xC << CIM_CTRL_FRC_BIT) /* Sample 1/13 frame */
#define CIM_CTRL_FRC_14 (0xD << CIM_CTRL_FRC_BIT) /* Sample 1/14 frame */
#define CIM_CTRL_FRC_15 (0xE << CIM_CTRL_FRC_BIT) /* Sample 1/15 frame */
#define CIM_CTRL_FRC_16 (0xF << CIM_CTRL_FRC_BIT) /* Sample 1/16 frame */
#define CIM_CTRL_DMA_EEOF (1 << 15) /* Enable EEOF interrupt */
#define CIM_CTRL_WIN_EN (1 << 14)
#define CIM_CTRL_VDDM (1 << 13) /* VDD interrupt enable */
#define CIM_CTRL_DMA_SOFM (1 << 12)
#define CIM_CTRL_DMA_EOFM (1 << 11)
#define CIM_CTRL_DMA_STOPM (1 << 10)
#define CIM_CTRL_RXF_TRIGM (1 << 9)
#define CIM_CTRL_RXF_OFM (1 << 8)
#define CIM_CTRL_DMA_SYNC (1 << 7) /*when change DA, do frame sync */
#define CIM_CTRL_RXF_TRIG_BIT 3
#define CIM_CTRL_RXF_TRIG_MASK (0xf << CIM_CTRL_RXF_TRIG_BIT) /* trigger value = (n+1)*burst_type */
#define CIM_CTRL_DMA_EN (1 << 2) /* Enable DMA */
#define CIM_CTRL_RXF_RST (1 << 1) /* RxFIFO reset */
#define CIM_CTRL_ENA (1 << 0) /* Enable CIM */
/* CIM State Register (CIM_STATE) */
#define CIM_STATE_DMA_EEOF (1 << 7) /* DMA Line EEOf irq */
#define CIM_STATE_DMA_SOF (1 << 6) /* DMA start irq */
#define CIM_STATE_DMA_EOF (1 << 5) /* DMA end irq */
#define CIM_STATE_DMA_STOP (1 << 4) /* DMA stop irq */
#define CIM_STATE_RXF_OF (1 << 3) /* RXFIFO over flow irq */
#define CIM_STATE_RXF_TRIG (1 << 2) /* RXFIFO triger meet irq */
#define CIM_STATE_RXF_EMPTY (1 << 1) /* RXFIFO empty irq */
#define CIM_STATE_VDD (1 << 0) /* CIM disabled irq */
/* CIM DMA Command Register (CIM_CMD) */
#define CIM_CMD_SOFINT (1 << 31) /* enable DMA start irq */
#define CIM_CMD_EOFINT (1 << 30) /* enable DMA end irq */
#define CIM_CMD_EEOFINT (1 << 29) /* enable DMA EEOF irq */
#define CIM_CMD_STOP (1 << 28) /* enable DMA stop irq */
#define CIM_CMD_OFRCV (1 << 27) /* enable recovery when TXFiFo overflow */
#define CIM_CMD_LEN_BIT 0
#define CIM_CMD_LEN_MASK (0xffffff << CIM_CMD_LEN_BIT)
/* CIM Window-Image Size Register (CIM_SIZE) */
#define CIM_SIZE_LPF_BIT 16 /* Lines per freame for csc output image */
#define CIM_SIZE_LPF_MASK (0x1fff << CIM_SIZE_LPF_BIT)
#define CIM_SIZE_PPL_BIT 0 /* Pixels per line for csc output image, should be an even number */
#define CIM_SIZE_PPL_MASK (0x1fff << CIM_SIZE_PPL_BIT)
/* CIM Image Offset Register (CIM_OFFSET) */
#define CIM_OFFSET_V_BIT 16 /* Vertical offset */
#define CIM_OFFSET_V_MASK (0xfff << CIM_OFFSET_V_BIT)
#define CIM_OFFSET_H_BIT 0 /* Horizontal offset, should be an enen number */
#define CIM_OFFSET_H_MASK (0xfff << CIM_OFFSET_H_BIT) /*OFFSET_H should be even number*/
/*************************************************************************
* SADC (Smart A/D Controller)
*************************************************************************/
#define SADC_ENA (SADC_BASE + 0x00) /* ADC Enable Register */
#define SADC_CFG (SADC_BASE + 0x04) /* ADC Configure Register */
#define SADC_CTRL (SADC_BASE + 0x08) /* ADC Control Register */
#define SADC_STATE (SADC_BASE + 0x0C) /* ADC Status Register*/
#define SADC_SAMETIME (SADC_BASE + 0x10) /* ADC Same Point Time Register */
#define SADC_WAITTIME (SADC_BASE + 0x14) /* ADC Wait Time Register */
#define SADC_TSDAT (SADC_BASE + 0x18) /* ADC Touch Screen Data Register */
#define SADC_BATDAT (SADC_BASE + 0x1C) /* ADC PBAT Data Register */
#define SADC_SADDAT (SADC_BASE + 0x20) /* ADC SADCIN Data Register */
#define SADC_ADCLK (SADC_BASE + 0x28) /* ADC Clock Divide Register */
#define REG_SADC_ENA REG8(SADC_ENA)
#define REG_SADC_CFG REG32(SADC_CFG)
#define REG_SADC_CTRL REG8(SADC_CTRL)
#define REG_SADC_STATE REG8(SADC_STATE)
#define REG_SADC_SAMETIME REG16(SADC_SAMETIME)
#define REG_SADC_WAITTIME REG16(SADC_WAITTIME)
#define REG_SADC_TSDAT REG32(SADC_TSDAT)
#define REG_SADC_BATDAT REG16(SADC_BATDAT)
#define REG_SADC_SADDAT REG16(SADC_SADDAT)
#define REG_SADC_ADCLK REG32(SADC_ADCLK)
/* ADC Enable Register */
#define SADC_ENA_ADEN (1 << 7) /* Touch Screen Enable */
#define SADC_ENA_ENTR_SLP (1 << 6) /* Touch Screen Enable */
#define SADC_ENA_EXIT_SLP (1 << 5) /* Touch Screen Enable */
#define SADC_ENA_TSEN (1 << 2) /* Touch Screen Enable */
#define SADC_ENA_PBATEN (1 << 1) /* PBAT Enable */
#define SADC_ENA_SADCINEN (1 << 0) /* SADCIN Enable */
/* ADC Configure Register */
#define SADC_CFG_EXIN (1 << 30)
#define SADC_CFG_CLKOUT_NUM_BIT 16
#define SADC_CFG_CLKOUT_NUM_MASK (0x7 << SADC_CFG_CLKOUT_NUM_BIT)
#define SADC_CFG_TS_DMA (1 << 15) /* Touch Screen DMA Enable */
#define SADC_CFG_XYZ_BIT 13 /* XYZ selection */
#define SADC_CFG_XYZ_MASK (0x3 << SADC_CFG_XYZ_BIT)
#define SADC_CFG_XY (0 << SADC_CFG_XYZ_BIT)
#define SADC_CFG_XYZ (1 << SADC_CFG_XYZ_BIT)
#define SADC_CFG_XYZ1Z2 (2 << SADC_CFG_XYZ_BIT)
#define SADC_CFG_SNUM_BIT 10 /* Sample Number */
#define SADC_CFG_SNUM_MASK (0x7 << SADC_CFG_SNUM_BIT)
#define SADC_CFG_SNUM_1 (0x0 << SADC_CFG_SNUM_BIT)
#define SADC_CFG_SNUM_2 (0x1 << SADC_CFG_SNUM_BIT)
#define SADC_CFG_SNUM_3 (0x2 << SADC_CFG_SNUM_BIT)
#define SADC_CFG_SNUM_4 (0x3 << SADC_CFG_SNUM_BIT)
#define SADC_CFG_SNUM_5 (0x4 << SADC_CFG_SNUM_BIT)
#define SADC_CFG_SNUM_6 (0x5 << SADC_CFG_SNUM_BIT)
#define SADC_CFG_SNUM_8 (0x6 << SADC_CFG_SNUM_BIT)
#define SADC_CFG_SNUM_9 (0x7 << SADC_CFG_SNUM_BIT)
#define SADC_CFG_CLKDIV_BIT 5 /* AD Converter frequency clock divider */
#define SADC_CFG_CLKDIV_MASK (0x1f << SADC_CFG_CLKDIV_BIT)
#define SADC_CFG_PBAT_HIGH (0 << 4) /* PBAT >= 2.5V */
#define SADC_CFG_PBAT_LOW (1 << 4) /* PBAT < 2.5V */
#define SADC_CFG_CMD_BIT 0 /* ADC Command */
#define SADC_CFG_CMD_MASK (0xf << SADC_CFG_CMD_BIT)
#define SADC_CFG_CMD_X_SE (0x0 << SADC_CFG_CMD_BIT) /* X Single-End */
#define SADC_CFG_CMD_Y_SE (0x1 << SADC_CFG_CMD_BIT) /* Y Single-End */
#define SADC_CFG_CMD_X_DIFF (0x2 << SADC_CFG_CMD_BIT) /* X Differential */
#define SADC_CFG_CMD_Y_DIFF (0x3 << SADC_CFG_CMD_BIT) /* Y Differential */
#define SADC_CFG_CMD_Z1_DIFF (0x4 << SADC_CFG_CMD_BIT) /* Z1 Differential */
#define SADC_CFG_CMD_Z2_DIFF (0x5 << SADC_CFG_CMD_BIT) /* Z2 Differential */
#define SADC_CFG_CMD_Z3_DIFF (0x6 << SADC_CFG_CMD_BIT) /* Z3 Differential */
#define SADC_CFG_CMD_Z4_DIFF (0x7 << SADC_CFG_CMD_BIT) /* Z4 Differential */
#define SADC_CFG_CMD_TP_SE (0x8 << SADC_CFG_CMD_BIT) /* Touch Pressure */
#define SADC_CFG_CMD_PBATH_SE (0x9 << SADC_CFG_CMD_BIT) /* PBAT >= 2.5V */
#define SADC_CFG_CMD_PBATL_SE (0xa << SADC_CFG_CMD_BIT) /* PBAT < 2.5V */
#define SADC_CFG_CMD_SADCIN_SE (0xb << SADC_CFG_CMD_BIT) /* Measure SADCIN */
#define SADC_CFG_CMD_INT_PEN (0xc << SADC_CFG_CMD_BIT) /* INT_PEN Enable */
/* ADC Control Register */
#define SADC_CTRL_SLPENDM (1 << 5) /* sleep Interrupt Mask */
#define SADC_CTRL_PENDM (1 << 4) /* Pen Down Interrupt Mask */
#define SADC_CTRL_PENUM (1 << 3) /* Pen Up Interrupt Mask */
#define SADC_CTRL_TSRDYM (1 << 2) /* Touch Screen Data Ready Interrupt Mask */
#define SADC_CTRL_PBATRDYM (1 << 1) /* PBAT Data Ready Interrupt Mask */
#define SADC_CTRL_SRDYM (1 << 0) /* SADCIN Data Ready Interrupt Mask */
/* ADC Status Register */
#define SADC_STATE_SLEEPND (1 << 5) /* Pen Down Interrupt Flag */
#define SADC_STATE_PEND (1 << 4) /* Pen Down Interrupt Flag */
#define SADC_STATE_PENU (1 << 3) /* Pen Up Interrupt Flag */
#define SADC_STATE_TSRDY (1 << 2) /* Touch Screen Data Ready Interrupt Flag */
#define SADC_STATE_PBATRDY (1 << 1) /* PBAT Data Ready Interrupt Flag */
#define SADC_STATE_SRDY (1 << 0) /* SADCIN Data Ready Interrupt Flag */
/* ADC Touch Screen Data Register */
#define SADC_TSDAT_DATA0_BIT 0
#define SADC_TSDAT_DATA0_MASK (0xfff << SADC_TSDAT_DATA0_BIT)
#define SADC_TSDAT_TYPE0 (1 << 15)
#define SADC_TSDAT_DATA1_BIT 16
#define SADC_TSDAT_DATA1_MASK (0xfff << SADC_TSDAT_DATA1_BIT)
#define SADC_TSDAT_TYPE1 (1 << 31)
/* ADC Clock Divide Register */
#define SADC_ADCLK_CLKDIV_10_BIT 16
#define SADC_ADCLK_CLKDIV_10_MASK (0x7f << SADC_ADCLK_CLKDIV_10_BIT)
#define SADC_ADCLK_CLKDIV_BIT 0
#define SADC_ADCLK_CLKDIV_MASK (0x3f << SADC_ADCLK_CLKDIV_BIT)
/*************************************************************************
* SLCD (Smart LCD Controller)
*************************************************************************/
#define SLCD_CFG (SLCD_BASE + 0xA0) /* SLCD Configure Register */
#define SLCD_CTRL (SLCD_BASE + 0xA4) /* SLCD Control Register */
#define SLCD_STATE (SLCD_BASE + 0xA8) /* SLCD Status Register */
#define SLCD_DATA (SLCD_BASE + 0xAC) /* SLCD Data Register */
#define REG_SLCD_CFG REG32(SLCD_CFG)
#define REG_SLCD_CTRL REG8(SLCD_CTRL)
#define REG_SLCD_STATE REG8(SLCD_STATE)
#define REG_SLCD_DATA REG32(SLCD_DATA)
/* SLCD Configure Register */
#define SLCD_CFG_DWIDTH_BIT 10
#define SLCD_CFG_DWIDTH_MASK (0x7 << SLCD_CFG_DWIDTH_BIT)
#define SLCD_CFG_DWIDTH_18BIT (0 << SLCD_CFG_DWIDTH_BIT)
#define SLCD_CFG_DWIDTH_16BIT (1 << SLCD_CFG_DWIDTH_BIT)
#define SLCD_CFG_DWIDTH_8BIT_x3 (2 << SLCD_CFG_DWIDTH_BIT)
#define SLCD_CFG_DWIDTH_8BIT_x2 (3 << SLCD_CFG_DWIDTH_BIT)
#define SLCD_CFG_DWIDTH_8BIT_x1 (4 << SLCD_CFG_DWIDTH_BIT)
#define SLCD_CFG_DWIDTH_24BIT (5 << SLCD_CFG_DWIDTH_BIT)
#define SLCD_CFG_DWIDTH_9BIT_x2 (7 << SLCD_CFG_DWIDTH_BIT)
#define SLCD_CFG_CWIDTH_BIT (8)
#define SLCD_CFG_CWIDTH_MASK (0x7 << SLCD_CFG_CWIDTH_BIT)
#define SLCD_CFG_CWIDTH_16BIT (0 << SLCD_CFG_CWIDTH_BIT)
#define SLCD_CFG_CWIDTH_8BIT (1 << SLCD_CFG_CWIDTH_BIT)
#define SLCD_CFG_CWIDTH_18BIT (2 << SLCD_CFG_CWIDTH_BIT)
#define SLCD_CFG_CWIDTH_24BIT (3 << SLCD_CFG_CWIDTH_BIT)
#define SLCD_CFG_CS_ACTIVE_LOW (0 << 4)
#define SLCD_CFG_CS_ACTIVE_HIGH (1 << 4)
#define SLCD_CFG_RS_CMD_LOW (0 << 3)
#define SLCD_CFG_RS_CMD_HIGH (1 << 3)
#define SLCD_CFG_CLK_ACTIVE_FALLING (0 << 1)
#define SLCD_CFG_CLK_ACTIVE_RISING (1 << 1)
#define SLCD_CFG_TYPE_PARALLEL (0 << 0)
#define SLCD_CFG_TYPE_SERIAL (1 << 0)
/* SLCD Control Register */
#define SLCD_CTRL_DMA_MODE (1 << 2)
#define SLCD_CTRL_DMA_START (1 << 1)
#define SLCD_CTRL_DMA_EN (1 << 0)
/* SLCD Status Register */
#define SLCD_STATE_BUSY (1 << 0)
/* SLCD Data Register */
#define SLCD_DATA_RS_DATA (0 << 31)
#define SLCD_DATA_RS_COMMAND (1 << 31)
/*************************************************************************
* LCD (LCD Controller)
*************************************************************************/
#define LCD_CFG (LCD_BASE + 0x00) /* LCD Configure Register */
#define LCD_CTRL (LCD_BASE + 0x30) /* LCD Control Register */
#define LCD_STATE (LCD_BASE + 0x34) /* LCD Status Register */
#define LCD_OSDC (LCD_BASE + 0x100) /* LCD OSD Configure Register */
#define LCD_OSDCTRL (LCD_BASE + 0x104) /* LCD OSD Control Register */
#define LCD_OSDS (LCD_BASE + 0x108) /* LCD OSD Status Register */
#define LCD_BGC (LCD_BASE + 0x10C) /* LCD Background Color Register */
#define LCD_KEY0 (LCD_BASE + 0x110) /* LCD Foreground Color Key Register 0 */
#define LCD_KEY1 (LCD_BASE + 0x114) /* LCD Foreground Color Key Register 1 */
#define LCD_ALPHA (LCD_BASE + 0x118) /* LCD ALPHA Register */
#define LCD_IPUR (LCD_BASE + 0x11C) /* LCD IPU Restart Register */
#define LCD_VAT (LCD_BASE + 0x0c) /* Virtual Area Setting Register */
#define LCD_DAH (LCD_BASE + 0x10) /* Display Area Horizontal Start/End Point */
#define LCD_DAV (LCD_BASE + 0x14) /* Display Area Vertical Start/End Point */
#define LCD_XYP0 (LCD_BASE + 0x120) /* Foreground 0 XY Position Register */
#define LCD_XYP1 (LCD_BASE + 0x124) /* Foreground 1 XY Position Register */
#define LCD_SIZE0 (LCD_BASE + 0x128) /* Foreground 0 Size Register */
#define LCD_SIZE1 (LCD_BASE + 0x12C) /* Foreground 1 Size Register */
#define LCD_RGBC (LCD_BASE + 0x90) /* RGB Controll Register */
#define LCD_VSYNC (LCD_BASE + 0x04) /* Vertical Synchronize Register */
#define LCD_HSYNC (LCD_BASE + 0x08) /* Horizontal Synchronize Register */
#define LCD_PS (LCD_BASE + 0x18) /* PS Signal Setting */
#define LCD_CLS (LCD_BASE + 0x1c) /* CLS Signal Setting */
#define LCD_SPL (LCD_BASE + 0x20) /* SPL Signal Setting */
#define LCD_REV (LCD_BASE + 0x24) /* REV Signal Setting */
#define LCD_IID (LCD_BASE + 0x38) /* Interrupt ID Register */
#define LCD_DA0 (LCD_BASE + 0x40) /* Descriptor Address Register 0 */
#define LCD_SA0 (LCD_BASE + 0x44) /* Source Address Register 0 */
#define LCD_FID0 (LCD_BASE + 0x48) /* Frame ID Register 0 */
#define LCD_CMD0 (LCD_BASE + 0x4c) /* DMA Command Register 0 */
#define LCD_DA1 (LCD_BASE + 0x50) /* Descriptor Address Register 1 */
#define LCD_SA1 (LCD_BASE + 0x54) /* Source Address Register 1 */
#define LCD_FID1 (LCD_BASE + 0x58) /* Frame ID Register 1 */
#define LCD_CMD1 (LCD_BASE + 0x5c) /* DMA Command Register 1 */
#define LCD_OFFS0 (LCD_BASE + 0x60) /* DMA Offsize Register 0 */
#define LCD_PW0 (LCD_BASE + 0x64) /* DMA Page Width Register 0 */
#define LCD_CNUM0 (LCD_BASE + 0x68) /* DMA Command Counter Register 0 */
#define LCD_DESSIZE0 (LCD_BASE + 0x6C) /* Foreground Size in Descriptor 0 Register*/
#define LCD_OFFS1 (LCD_BASE + 0x70) /* DMA Offsize Register 1 */
#define LCD_PW1 (LCD_BASE + 0x74) /* DMA Page Width Register 1 */
#define LCD_CNUM1 (LCD_BASE + 0x78) /* DMA Command Counter Register 1 */
#define LCD_DESSIZE1 (LCD_BASE + 0x7C) /* Foreground Size in Descriptor 1 Register*/
#define REG_LCD_CFG REG32(LCD_CFG)
#define REG_LCD_CTRL REG32(LCD_CTRL)
#define REG_LCD_STATE REG32(LCD_STATE)
#define REG_LCD_OSDC REG16(LCD_OSDC)
#define REG_LCD_OSDCTRL REG16(LCD_OSDCTRL)
#define REG_LCD_OSDS REG16(LCD_OSDS)
#define REG_LCD_BGC REG32(LCD_BGC)
#define REG_LCD_KEY0 REG32(LCD_KEY0)
#define REG_LCD_KEY1 REG32(LCD_KEY1)
#define REG_LCD_ALPHA REG8(LCD_ALPHA)
#define REG_LCD_IPUR REG32(LCD_IPUR)
#define REG_LCD_VAT REG32(LCD_VAT)
#define REG_LCD_DAH REG32(LCD_DAH)
#define REG_LCD_DAV REG32(LCD_DAV)
#define REG_LCD_XYP0 REG32(LCD_XYP0)
#define REG_LCD_XYP1 REG32(LCD_XYP1)
#define REG_LCD_SIZE0 REG32(LCD_SIZE0)
#define REG_LCD_SIZE1 REG32(LCD_SIZE1)
#define REG_LCD_RGBC REG16(LCD_RGBC)
#define REG_LCD_VSYNC REG32(LCD_VSYNC)
#define REG_LCD_HSYNC REG32(LCD_HSYNC)
#define REG_LCD_PS REG32(LCD_PS)
#define REG_LCD_CLS REG32(LCD_CLS)
#define REG_LCD_SPL REG32(LCD_SPL)
#define REG_LCD_REV REG32(LCD_REV)
#define REG_LCD_IID REG32(LCD_IID)
#define REG_LCD_DA0 REG32(LCD_DA0)
#define REG_LCD_SA0 REG32(LCD_SA0)
#define REG_LCD_FID0 REG32(LCD_FID0)
#define REG_LCD_CMD0 REG32(LCD_CMD0)
#define REG_LCD_DA1 REG32(LCD_DA1)
#define REG_LCD_SA1 REG32(LCD_SA1)
#define REG_LCD_FID1 REG32(LCD_FID1)
#define REG_LCD_CMD1 REG32(LCD_CMD1)
#define REG_LCD_OFFS0 REG32(LCD_OFFS0)
#define REG_LCD_PW0 REG32(LCD_PW0)
#define REG_LCD_CNUM0 REG32(LCD_CNUM0)
#define REG_LCD_DESSIZE0 REG32(LCD_DESSIZE0)
#define REG_LCD_OFFS1 REG32(LCD_OFFS1)
#define REG_LCD_PW1 REG32(LCD_PW1)
#define REG_LCD_CNUM1 REG32(LCD_CNUM1)
#define REG_LCD_DESSIZE1 REG32(LCD_DESSIZE1)
/* LCD Configure Register */
#define LCD_CFG_LCDPIN_BIT 31 /* LCD pins selection */
#define LCD_CFG_LCDPIN_MASK (0x1 << LCD_CFG_LCDPIN_BIT)
#define LCD_CFG_LCDPIN_LCD (0x0 << LCD_CFG_LCDPIN_BIT)
#define LCD_CFG_LCDPIN_SLCD (0x1 << LCD_CFG_LCDPIN_BIT)
#define LCD_CFG_TVEPEH (1 << 30) /* TVE PAL enable extra halfline signal */
#define LCD_CFG_FUHOLD (1 << 29) /* hold pixel clock when outFIFO underrun */
#define LCD_CFG_NEWDES (1 << 28) /* use new descripter. old: 4words, new:8words */
#define LCD_CFG_PALBP (1 << 27) /* bypass data format and alpha blending */
#define LCD_CFG_TVEN (1 << 26) /* indicate the terminal is lcd or tv */
#define LCD_CFG_RECOVER (1 << 25) /* Auto recover when output fifo underrun */
#define LCD_CFG_DITHER (1 << 24) /* Dither function */
#define LCD_CFG_PSM (1 << 23) /* PS signal mode */
#define LCD_CFG_CLSM (1 << 22) /* CLS signal mode */
#define LCD_CFG_SPLM (1 << 21) /* SPL signal mode */
#define LCD_CFG_REVM (1 << 20) /* REV signal mode */
#define LCD_CFG_HSYNM (1 << 19) /* HSYNC signal mode */
#define LCD_CFG_PCLKM (1 << 18) /* PCLK signal mode */
#define LCD_CFG_INVDAT (1 << 17) /* Inverse output data */
#define LCD_CFG_SYNDIR_IN (1 << 16) /* VSYNC&HSYNC direction */
#define LCD_CFG_PSP (1 << 15) /* PS pin reset state */
#define LCD_CFG_CLSP (1 << 14) /* CLS pin reset state */
#define LCD_CFG_SPLP (1 << 13) /* SPL pin reset state */
#define LCD_CFG_REVP (1 << 12) /* REV pin reset state */
#define LCD_CFG_HSP (1 << 11) /* HSYNC polarity:0-active high,1-active low */
#define LCD_CFG_PCP (1 << 10) /* PCLK polarity:0-rising,1-falling */
#define LCD_CFG_DEP (1 << 9) /* DE polarity:0-active high,1-active low */
#define LCD_CFG_VSP (1 << 8) /* VSYNC polarity:0-rising,1-falling */
#define LCD_CFG_MODE_TFT_18BIT (1 << 7) /* 18bit TFT */
#define LCD_CFG_MODE_TFT_16BIT (0 << 7) /* 16bit TFT */
#define LCD_CFG_MODE_TFT_24BIT (1 << 6) /* 24bit TFT */
#define LCD_CFG_PDW_BIT 4 /* STN pins utilization */
#define LCD_CFG_PDW_MASK (0x3 << LCD_DEV_PDW_BIT)
#define LCD_CFG_PDW_1 (0 << LCD_CFG_PDW_BIT) /* LCD_D[0] */
#define LCD_CFG_PDW_2 (1 << LCD_CFG_PDW_BIT) /* LCD_D[0:1] */
#define LCD_CFG_PDW_4 (2 << LCD_CFG_PDW_BIT) /* LCD_D[0:3]/LCD_D[8:11] */
#define LCD_CFG_PDW_8 (3 << LCD_CFG_PDW_BIT) /* LCD_D[0:7]/LCD_D[8:15] */
#define LCD_CFG_MODE_BIT 0 /* Display Device Mode Select */
#define LCD_CFG_MODE_MASK (0x0f << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_GENERIC_TFT (0 << LCD_CFG_MODE_BIT) /* 16,18 bit TFT */
#define LCD_CFG_MODE_SPECIAL_TFT_1 (1 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_SPECIAL_TFT_2 (2 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_SPECIAL_TFT_3 (3 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_NONINTER_CCIR656 (4 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_INTER_CCIR656 (6 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_SINGLE_CSTN (8 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_SINGLE_MSTN (9 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_DUAL_CSTN (10 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_DUAL_MSTN (11 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_SERIAL_TFT (12 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_LCM (13 << LCD_CFG_MODE_BIT)
#define LCD_CFG_MODE_SLCD LCD_CFG_MODE_LCM
/* LCD Control Register */
#define LCD_CTRL_BST_BIT 28 /* Burst Length Selection */
#define LCD_CTRL_BST_MASK (0x03 << LCD_CTRL_BST_BIT)
#define LCD_CTRL_BST_4 (0 << LCD_CTRL_BST_BIT) /* 4-word */
#define LCD_CTRL_BST_8 (1 << LCD_CTRL_BST_BIT) /* 8-word */
#define LCD_CTRL_BST_16 (2 << LCD_CTRL_BST_BIT) /* 16-word */
#define LCD_CTRL_BST_32 (3 << LCD_CTRL_BST_BIT) /* 32-word */
#define LCD_CTRL_RGB565 (0 << 27) /* RGB565 mode(foreground 0 in OSD mode) */
#define LCD_CTRL_RGB555 (1 << 27) /* RGB555 mode(foreground 0 in OSD mode) */
#define LCD_CTRL_OFUP (1 << 26) /* Output FIFO underrun protection enable */
#define LCD_CTRL_FRC_BIT 24 /* STN FRC Algorithm Selection */
#define LCD_CTRL_FRC_MASK (0x03 << LCD_CTRL_FRC_BIT)
#define LCD_CTRL_FRC_16 (0 << LCD_CTRL_FRC_BIT) /* 16 grayscale */
#define LCD_CTRL_FRC_4 (1 << LCD_CTRL_FRC_BIT) /* 4 grayscale */
#define LCD_CTRL_FRC_2 (2 << LCD_CTRL_FRC_BIT) /* 2 grayscale */
#define LCD_CTRL_PDD_BIT 16 /* Load Palette Delay Counter */
#define LCD_CTRL_PDD_MASK (0xff << LCD_CTRL_PDD_BIT)
#define LCD_CTRL_VGA (1 << 15) /* VGA interface enable */
#define LCD_CTRL_DACTE (1 << 14) /* DAC loop back test */
#define LCD_CTRL_EOFM (1 << 13) /* EOF interrupt mask */
#define LCD_CTRL_SOFM (1 << 12) /* SOF interrupt mask */
#define LCD_CTRL_OFUM (1 << 11) /* Output FIFO underrun interrupt mask */
#define LCD_CTRL_IFUM0 (1 << 10) /* Input FIFO 0 underrun interrupt mask */
#define LCD_CTRL_IFUM1 (1 << 9) /* Input FIFO 1 underrun interrupt mask */
#define LCD_CTRL_LDDM (1 << 8) /* LCD disable done interrupt mask */
#define LCD_CTRL_QDM (1 << 7) /* LCD quick disable done interrupt mask */
#define LCD_CTRL_BEDN (1 << 6) /* Endian selection */
#define LCD_CTRL_PEDN (1 << 5) /* Endian in byte:0-msb first, 1-lsb first */
#define LCD_CTRL_DIS (1 << 4) /* Disable indicate bit */
#define LCD_CTRL_ENA (1 << 3) /* LCD enable bit */
#define LCD_CTRL_BPP_BIT 0 /* Bits Per Pixel */
#define LCD_CTRL_BPP_MASK (0x07 << LCD_CTRL_BPP_BIT)
#define LCD_CTRL_BPP_1 (0 << LCD_CTRL_BPP_BIT) /* 1 bpp */
#define LCD_CTRL_BPP_2 (1 << LCD_CTRL_BPP_BIT) /* 2 bpp */
#define LCD_CTRL_BPP_4 (2 << LCD_CTRL_BPP_BIT) /* 4 bpp */
#define LCD_CTRL_BPP_8 (3 << LCD_CTRL_BPP_BIT) /* 8 bpp */
#define LCD_CTRL_BPP_16 (4 << LCD_CTRL_BPP_BIT) /* 15/16 bpp */
#define LCD_CTRL_BPP_18_24 (5 << LCD_CTRL_BPP_BIT) /* 18/24/32 bpp */
#define LCD_CTRL_BPP_CMPS_24 (6 << LCD_CTRL_BPP_BIT) /* 24 compress bpp */
/* LCD Status Register */
#define LCD_STATE_QD (1 << 7) /* Quick Disable Done */
#define LCD_STATE_EOF (1 << 5) /* EOF Flag */
#define LCD_STATE_SOF (1 << 4) /* SOF Flag */
#define LCD_STATE_OFU (1 << 3) /* Output FIFO Underrun */
#define LCD_STATE_IFU0 (1 << 2) /* Input FIFO 0 Underrun */
#define LCD_STATE_IFU1 (1 << 1) /* Input FIFO 1 Underrun */
#define LCD_STATE_LDD (1 << 0) /* LCD Disabled */
/* OSD Configure Register */
#define LCD_OSDC_SOFM1 (1 << 15) /* Start of frame interrupt mask for foreground 1 */
#define LCD_OSDC_EOFM1 (1 << 14) /* End of frame interrupt mask for foreground 1 */
#define LCD_OSDC_SOFM0 (1 << 11) /* Start of frame interrupt mask for foreground 0 */
#define LCD_OSDC_EOFM0 (1 << 10) /* End of frame interrupt mask for foreground 0 */
#define LCD_OSDC_F1EN (1 << 4) /* enable foreground 1 */
#define LCD_OSDC_F0EN (1 << 3) /* enable foreground 0 */
#define LCD_OSDC_ALPHAEN (1 << 2) /* enable alpha blending */
#define LCD_OSDC_ALPHAMD (1 << 1) /* alpha blending mode */
#define LCD_OSDC_OSDEN (1 << 0) /* OSD mode enable */
/* OSD Controll Register */
#define LCD_OSDCTRL_IPU (1 << 15) /* input data from IPU */
#define LCD_OSDCTRL_RGB565 (0 << 4) /* foreground 1, 16bpp, 0-RGB565, 1-RGB555 */
#define LCD_OSDCTRL_RGB555 (1 << 4) /* foreground 1, 16bpp, 0-RGB565, 1-RGB555 */
#define LCD_OSDCTRL_CHANGES (1 << 3) /* Change size flag */
#define LCD_OSDCTRL_OSDBPP_BIT 0 /* Bits Per Pixel of OSD Channel 1 */
#define LCD_OSDCTRL_OSDBPP_MASK (0x7<<LCD_OSDCTRL_OSDBPP_BIT) /* Bits Per Pixel of OSD Channel 1's MASK */
#define LCD_OSDCTRL_OSDBPP_16 (4 << LCD_OSDCTRL_OSDBPP_BIT) /* RGB 15,16 bit*/
#define LCD_OSDCTRL_OSDBPP_15_16 (4 << LCD_OSDCTRL_OSDBPP_BIT) /* RGB 15,16 bit*/
#define LCD_OSDCTRL_OSDBPP_18_24 (5 << LCD_OSDCTRL_OSDBPP_BIT) /* RGB 18,24 bit*/
#define LCD_OSDCTRL_OSDBPP_CMPS_24 (6 << LCD_OSDCTRL_OSDBPP_BIT) /* RGB 18,24 bit*/
/* OSD State Register */
#define LCD_OSDS_SOF1 (1 << 15) /* Start of frame flag for foreground 1 */
#define LCD_OSDS_EOF1 (1 << 14) /* End of frame flag for foreground 1 */
#define LCD_OSDS_SOF0 (1 << 11) /* Start of frame flag for foreground 0 */
#define LCD_OSDS_EOF0 (1 << 10) /* End of frame flag for foreground 0 */
#define LCD_OSDS_READY (1 << 0) /* Read for accept the change */
/* Background Color Register */
#define LCD_BGC_RED_OFFSET (1 << 16) /* Red color offset */
#define LCD_BGC_RED_MASK (0xFF<<LCD_BGC_RED_OFFSET)
#define LCD_BGC_GREEN_OFFSET (1 << 8) /* Green color offset */
#define LCD_BGC_GREEN_MASK (0xFF<<LCD_BGC_GREEN_OFFSET)
#define LCD_BGC_BLUE_OFFSET (1 << 0) /* Blue color offset */
#define LCD_BGC_BLUE_MASK (0xFF<<LCD_BGC_BLUE_OFFSET)
/* Foreground Color Key Register 0,1(foreground 0, foreground 1) */
#define LCD_KEY_KEYEN (1 << 31) /* enable color key */
#define LCD_KEY_KEYMD (1 << 30) /* color key mode */
#define LCD_KEY_RED_OFFSET 16 /* Red color offset */
#define LCD_KEY_RED_MASK (0xFF<<LCD_KEY_RED_OFFSET)
#define LCD_KEY_GREEN_OFFSET 8 /* Green color offset */
#define LCD_KEY_GREEN_MASK (0xFF<<LCD_KEY_GREEN_OFFSET)
#define LCD_KEY_BLUE_OFFSET 0 /* Blue color offset */
#define LCD_KEY_BLUE_MASK (0xFF<<LCD_KEY_BLUE_OFFSET)
#define LCD_KEY_MASK (LCD_KEY_RED_MASK|LCD_KEY_GREEN_MASK|LCD_KEY_BLUE_MASK)
/* IPU Restart Register */
#define LCD_IPUR_IPUREN (1 << 31) /* IPU restart function enable*/
#define LCD_IPUR_IPURMASK (0xFFFFFF) /* IPU restart value mask*/
/* RGB Control Register */
#define LCD_RGBC_RGBDM (1 << 15) /* enable RGB Dummy data */
#define LCD_RGBC_DMM (1 << 14) /* RGB Dummy mode */
#define LCD_RGBC_YCC (1 << 8) /* RGB to YCC */
#define LCD_RGBC_ODDRGB_BIT 4 /* odd line serial RGB data arrangement */
#define LCD_RGBC_ODDRGB_MASK (0x7<<LCD_RGBC_ODDRGB_BIT)
#define LCD_RGBC_ODD_RGB 0
#define LCD_RGBC_ODD_RBG 1
#define LCD_RGBC_ODD_GRB 2
#define LCD_RGBC_ODD_GBR 3
#define LCD_RGBC_ODD_BRG 4
#define LCD_RGBC_ODD_BGR 5
#define LCD_RGBC_EVENRGB_BIT 0 /* even line serial RGB data arrangement */
#define LCD_RGBC_EVENRGB_MASK (0x7<<LCD_RGBC_EVENRGB_BIT)
#define LCD_RGBC_EVEN_RGB 0
#define LCD_RGBC_EVEN_RBG 1
#define LCD_RGBC_EVEN_GRB 2
#define LCD_RGBC_EVEN_GBR 3
#define LCD_RGBC_EVEN_BRG 4
#define LCD_RGBC_EVEN_BGR 5
/* Vertical Synchronize Register */
#define LCD_VSYNC_VPS_BIT 16 /* VSYNC pulse start in line clock, fixed to 0 */
#define LCD_VSYNC_VPS_MASK (0xffff << LCD_VSYNC_VPS_BIT)
#define LCD_VSYNC_VPE_BIT 0 /* VSYNC pulse end in line clock */
#define LCD_VSYNC_VPE_MASK (0xffff << LCD_VSYNC_VPS_BIT)
/* Horizontal Synchronize Register */
#define LCD_HSYNC_HPS_BIT 16 /* HSYNC pulse start position in dot clock */
#define LCD_HSYNC_HPS_MASK (0xffff << LCD_HSYNC_HPS_BIT)
#define LCD_HSYNC_HPE_BIT 0 /* HSYNC pulse end position in dot clock */
#define LCD_HSYNC_HPE_MASK (0xffff << LCD_HSYNC_HPE_BIT)
/* Virtual Area Setting Register */
#define LCD_VAT_HT_BIT 16 /* Horizontal Total size in dot clock */
#define LCD_VAT_HT_MASK (0xffff << LCD_VAT_HT_BIT)
#define LCD_VAT_VT_BIT 0 /* Vertical Total size in dot clock */
#define LCD_VAT_VT_MASK (0xffff << LCD_VAT_VT_BIT)
/* Display Area Horizontal Start/End Point Register */
#define LCD_DAH_HDS_BIT 16 /* Horizontal display area start in dot clock */
#define LCD_DAH_HDS_MASK (0xffff << LCD_DAH_HDS_BIT)
#define LCD_DAH_HDE_BIT 0 /* Horizontal display area end in dot clock */
#define LCD_DAH_HDE_MASK (0xffff << LCD_DAH_HDE_BIT)
/* Display Area Vertical Start/End Point Register */
#define LCD_DAV_VDS_BIT 16 /* Vertical display area start in line clock */
#define LCD_DAV_VDS_MASK (0xffff << LCD_DAV_VDS_BIT)
#define LCD_DAV_VDE_BIT 0 /* Vertical display area end in line clock */
#define LCD_DAV_VDE_MASK (0xffff << LCD_DAV_VDE_BIT)
/* Foreground XY Position Register */
#define LCD_XYP_YPOS_BIT 16 /* Y position bit of foreground 0 or 1 */
#define LCD_XYP_YPOS_MASK (0xffff << LCD_XYP_YPOS_BIT)
#define LCD_XYP_XPOS_BIT 0 /* X position bit of foreground 0 or 1 */
#define LCD_XYP_XPOS_MASK (0xffff << LCD_XYP_XPOS_BIT)
/* PS Signal Setting */
#define LCD_PS_PSS_BIT 16 /* PS signal start position in dot clock */
#define LCD_PS_PSS_MASK (0xffff << LCD_PS_PSS_BIT)
#define LCD_PS_PSE_BIT 0 /* PS signal end position in dot clock */
#define LCD_PS_PSE_MASK (0xffff << LCD_PS_PSE_BIT)
/* CLS Signal Setting */
#define LCD_CLS_CLSS_BIT 16 /* CLS signal start position in dot clock */
#define LCD_CLS_CLSS_MASK (0xffff << LCD_CLS_CLSS_BIT)
#define LCD_CLS_CLSE_BIT 0 /* CLS signal end position in dot clock */
#define LCD_CLS_CLSE_MASK (0xffff << LCD_CLS_CLSE_BIT)
/* SPL Signal Setting */
#define LCD_SPL_SPLS_BIT 16 /* SPL signal start position in dot clock */
#define LCD_SPL_SPLS_MASK (0xffff << LCD_SPL_SPLS_BIT)
#define LCD_SPL_SPLE_BIT 0 /* SPL signal end position in dot clock */
#define LCD_SPL_SPLE_MASK (0xffff << LCD_SPL_SPLE_BIT)
/* REV Signal Setting */
#define LCD_REV_REVS_BIT 16 /* REV signal start position in dot clock */
#define LCD_REV_REVS_MASK (0xffff << LCD_REV_REVS_BIT)
/* DMA Command Register */
#define LCD_CMD_SOFINT (1 << 31)
#define LCD_CMD_EOFINT (1 << 30)
#define LCD_CMD_CMD (1 << 29) /* indicate command in slcd mode */
#define LCD_CMD_PAL (1 << 28)
#define LCD_CMD_LEN_BIT 0
#define LCD_CMD_LEN_MASK (0xffffff << LCD_CMD_LEN_BIT)
/* DMA Offsize Register 0,1 */
/* DMA Page Width Register 0,1 */
/* DMA Command Counter Register 0,1 */
/* Foreground 0,1 Size Register */
#define LCD_DESSIZE_HEIGHT_BIT 16 /* height of foreground 1 */
#define LCD_DESSIZE_HEIGHT_MASK (0xffff << LCD_DESSIZE_HEIGHT_BIT)
#define LCD_DESSIZE_WIDTH_BIT 0 /* width of foreground 1 */
#define LCD_DESSIZE_WIDTH_MASK (0xffff << LCD_DESSIZE_WIDTH_BIT)
/*************************************************************************
* TVE (TV Encoder Controller)
*************************************************************************/
#define TVE_CTRL (TVE_BASE + 0x40) /* TV Encoder Control register */
#define TVE_FRCFG (TVE_BASE + 0x44) /* Frame configure register */
#define TVE_SLCFG1 (TVE_BASE + 0x50) /* TV signal level configure register 1 */
#define TVE_SLCFG2 (TVE_BASE + 0x54) /* TV signal level configure register 2*/
#define TVE_SLCFG3 (TVE_BASE + 0x58) /* TV signal level configure register 3*/
#define TVE_LTCFG1 (TVE_BASE + 0x60) /* Line timing configure register 1 */
#define TVE_LTCFG2 (TVE_BASE + 0x64) /* Line timing configure register 2 */
#define TVE_CFREQ (TVE_BASE + 0x70) /* Chrominance sub-carrier frequency configure register */
#define TVE_CPHASE (TVE_BASE + 0x74) /* Chrominance sub-carrier phase configure register */
#define TVE_CBCRCFG (TVE_BASE + 0x78) /* Chrominance filter configure register */
#define TVE_WSSCR (TVE_BASE + 0x80) /* Wide screen signal control register */
#define TVE_WSSCFG1 (TVE_BASE + 0x84) /* Wide screen signal configure register 1 */
#define TVE_WSSCFG2 (TVE_BASE + 0x88) /* Wide screen signal configure register 2 */
#define TVE_WSSCFG3 (TVE_BASE + 0x8c) /* Wide screen signal configure register 3 */
#define REG_TVE_CTRL REG32(TVE_CTRL)
#define REG_TVE_FRCFG REG32(TVE_FRCFG)
#define REG_TVE_SLCFG1 REG32(TVE_SLCFG1)
#define REG_TVE_SLCFG2 REG32(TVE_SLCFG2)
#define REG_TVE_SLCFG3 REG32(TVE_SLCFG3)
#define REG_TVE_LTCFG1 REG32(TVE_LTCFG1)
#define REG_TVE_LTCFG2 REG32(TVE_LTCFG2)
#define REG_TVE_CFREQ REG32(TVE_CFREQ)
#define REG_TVE_CPHASE REG32(TVE_CPHASE)
#define REG_TVE_CBCRCFG REG32(TVE_CBCRCFG)
#define REG_TVE_WSSCR REG32(TVE_WSSCR)
#define REG_TVE_WSSCFG1 REG32(TVE_WSSCFG1)
#define REG_TVE_WSSCFG2 REG32(TVE_WSSCFG2)
#define REG_TVE_WSSCFG3 REG32(TVE_WSSCFG3)
/* TV Encoder Control register */
#define TVE_CTRL_EYCBCR (1 << 25) /* YCbCr_enable */
#define TVE_CTRL_ECVBS (1 << 24) /* cvbs_enable */
#define TVE_CTRL_DAPD3 (1 << 23) /* DAC 3 power down */
#define TVE_CTRL_DAPD2 (1 << 22) /* DAC 2 power down */
#define TVE_CTRL_DAPD1 (1 << 21) /* DAC 1 power down */
#define TVE_CTRL_DAPD (1 << 20) /* power down all DACs */
#define TVE_CTRL_YCDLY_BIT 16
#define TVE_CTRL_YCDLY_MASK (0x7 << TVE_CTRL_YCDLY_BIT)
#define TVE_CTRL_CGAIN_BIT 14
#define TVE_CTRL_CGAIN_MASK (0x3 << TVE_CTRL_CGAIN_BIT)
#define TVE_CTRL_CGAIN_FULL (0 << TVE_CTRL_CGAIN_BIT) /* gain = 1 */
#define TVE_CTRL_CGAIN_QUTR (1 << TVE_CTRL_CGAIN_BIT) /* gain = 1/4 */
#define TVE_CTRL_CGAIN_HALF (2 << TVE_CTRL_CGAIN_BIT) /* gain = 1/2 */
#define TVE_CTRL_CGAIN_THREE_QURT (3 << TVE_CTRL_CGAIN_BIT) /* gain = 3/4 */
#define TVE_CTRL_CBW_BIT 12
#define TVE_CTRL_CBW_MASK (0x3 << TVE_CTRL_CBW_BIT)
#define TVE_CTRL_CBW_NARROW (0 << TVE_CTRL_CBW_BIT) /* Narrow band */
#define TVE_CTRL_CBW_WIDE (1 << TVE_CTRL_CBW_BIT) /* Wide band */
#define TVE_CTRL_CBW_EXTRA (2 << TVE_CTRL_CBW_BIT) /* Extra wide band */
#define TVE_CTRL_CBW_ULTRA (3 << TVE_CTRL_CBW_BIT) /* Ultra wide band */
#define TVE_CTRL_SYNCT (1 << 9)
#define TVE_CTRL_PAL (1 << 8)
#define TVE_CTRL_FINV (1 << 7) /* invert_top:1-invert top and bottom fields. */
#define TVE_CTRL_ZBLACK (1 << 6) /* bypass_yclamp:1-Black of luminance (Y) input is 0.*/
#define TVE_CTRL_CR1ST (1 << 5) /* uv_order:0-Cb before Cr,1-Cr before Cb */
#define TVE_CTRL_CLBAR (1 << 4) /* Color bar mode:0-Output input video to TV,1-Output color bar to TV */
#define TVE_CTRL_SWRST (1 << 0) /* Software reset:1-TVE is reset */
/* Signal level configure register 1 */
#define TVE_SLCFG1_BLACKL_BIT 0
#define TVE_SLCFG1_BLACKL_MASK (0x3ff << TVE_SLCFG1_BLACKL_BIT)
#define TVE_SLCFG1_WHITEL_BIT 16
#define TVE_SLCFG1_WHITEL_MASK (0x3ff << TVE_SLCFG1_WHITEL_BIT)
/* Signal level configure register 2 */
#define TVE_SLCFG2_BLANKL_BIT 0
#define TVE_SLCFG2_BLANKL_MASK (0x3ff << TVE_SLCFG2_BLANKL_BIT)
#define TVE_SLCFG2_VBLANKL_BIT 16
#define TVE_SLCFG2_VBLANKL_MASK (0x3ff << TVE_SLCFG2_VBLANKL_BIT)
/* Signal level configure register 3 */
#define TVE_SLCFG3_SYNCL_BIT 0
#define TVE_SLCFG3_SYNCL_MASK (0xff << TVE_SLCFG3_SYNCL_BIT)
/* Line timing configure register 1 */
#define TVE_LTCFG1_BACKP_BIT 0
#define TVE_LTCFG1_BACKP_MASK (0x7f << TVE_LTCFG1_BACKP_BIT)
#define TVE_LTCFG1_HSYNCW_BIT 8
#define TVE_LTCFG1_HSYNCW_MASK (0x7f << TVE_LTCFG1_HSYNCW_BIT)
#define TVE_LTCFG1_FRONTP_BIT 16
#define TVE_LTCFG1_FRONTP_MASK (0x1f << TVE_LTCFG1_FRONTP_BIT)
/* Line timing configure register 2 */
#define TVE_LTCFG2_BURSTW_BIT 0
#define TVE_LTCFG2_BURSTW_MASK (0x3f << TVE_LTCFG2_BURSTW_BIT)
#define TVE_LTCFG2_PREBW_BIT 8
#define TVE_LTCFG2_PREBW_MASK (0x1f << TVE_LTCFG2_PREBW_BIT)
#define TVE_LTCFG2_ACTLIN_BIT 16
#define TVE_LTCFG2_ACTLIN_MASK (0x7ff << TVE_LTCFG2_ACTLIN_BIT)
/* Chrominance sub-carrier phase configure register */
#define TVE_CPHASE_CCRSTP_BIT 0
#define TVE_CPHASE_CCRSTP_MASK (0x3 << TVE_CPHASE_CCRSTP_BIT)
#define TVE_CPHASE_CCRSTP_8 (0 << TVE_CPHASE_CCRSTP_BIT) /* Every 8 field */
#define TVE_CPHASE_CCRSTP_4 (1 << TVE_CPHASE_CCRSTP_BIT) /* Every 4 field */
#define TVE_CPHASE_CCRSTP_2 (2 << TVE_CPHASE_CCRSTP_BIT) /* Every 2 lines */
#define TVE_CPHASE_CCRSTP_0 (3 << TVE_CPHASE_CCRSTP_BIT) /* Never */
#define TVE_CPHASE_ACTPH_BIT 16
#define TVE_CPHASE_ACTPH_MASK (0xff << TVE_CPHASE_ACTPH_BIT)
#define TVE_CPHASE_INITPH_BIT 24
#define TVE_CPHASE_INITPH_MASK (0xff << TVE_CPHASE_INITPH_BIT)
/* Chrominance filter configure register */
#define TVE_CBCRCFG_CRGAIN_BIT 0
#define TVE_CBCRCFG_CRGAIN_MASK (0xff << TVE_CBCRCFG_CRGAIN_BIT)
#define TVE_CBCRCFG_CBGAIN_BIT 8
#define TVE_CBCRCFG_CBGAIN_MASK (0xff << TVE_CBCRCFG_CBGAIN_BIT)
#define TVE_CBCRCFG_CRBA_BIT 16
#define TVE_CBCRCFG_CRBA_MASK (0xff << TVE_CBCRCFG_CRBA_BIT)
#define TVE_CBCRCFG_CBBA_BIT 24
#define TVE_CBCRCFG_CBBA_MASK (0xff << TVE_CBCRCFG_CBBA_BIT)
/* Frame configure register */
#define TVE_FRCFG_NLINE_BIT 0
#define TVE_FRCFG_NLINE_MASK (0x3ff << TVE_FRCFG_NLINE_BIT)
#define TVE_FRCFG_L1ST_BIT 16
#define TVE_FRCFG_L1ST_MASK (0xff << TVE_FRCFG_L1ST_BIT)
/* Wide screen signal control register */
#define TVE_WSSCR_EWSS0_BIT 0
#define TVE_WSSCR_EWSS1_BIT 1
#define TVE_WSSCR_WSSTP_BIT 2
#define TVE_WSSCR_WSSCKBP_BIT 3
#define TVE_WSSCR_WSSEDGE_BIT 4
#define TVE_WSSCR_WSSEDGE_MASK (0x7 << TVE_WSSCR_WSSEDGE_BIT)
#define TVE_WSSCR_ENCH_BIT 8
#define TVE_WSSCR_NCHW_BIT 9
#define TVE_WSSCR_NCHFREQ_BIT 12
#define TVE_WSSCR_NCHFREQ_MASK (0x7 << TVE_WSSCR_NCHFREQ_BIT)
/*************************************************************************
* USB Device
*************************************************************************/
#define USB_BASE UDC_BASE
#define USB_REG_FADDR (USB_BASE + 0x00) /* Function Address 8-bit */
#define USB_REG_POWER (USB_BASE + 0x01) /* Power Managemetn 8-bit */
#define USB_REG_INTRIN (USB_BASE + 0x02) /* Interrupt IN 16-bit */
#define USB_REG_INTROUT (USB_BASE + 0x04) /* Interrupt OUT 16-bit */
#define USB_REG_INTRINE (USB_BASE + 0x06) /* Intr IN enable 16-bit */
#define USB_REG_INTROUTE (USB_BASE + 0x08) /* Intr OUT enable 16-bit */
#define USB_REG_INTRUSB (USB_BASE + 0x0a) /* Interrupt USB 8-bit */
#define USB_REG_INTRUSBE (USB_BASE + 0x0b) /* Interrupt USB Enable 8-bit */
#define USB_REG_FRAME (USB_BASE + 0x0c) /* Frame number 16-bit */
#define USB_REG_INDEX (USB_BASE + 0x0e) /* Index register 8-bit */
#define USB_REG_TESTMODE (USB_BASE + 0x0f) /* USB test mode 8-bit */
#define USB_REG_CSR0 (USB_BASE + 0x12) /* EP0 CSR 8-bit */
#define USB_REG_INMAXP (USB_BASE + 0x10) /* EP1-2 IN Max Pkt Size 16-bit */
#define USB_REG_INCSR (USB_BASE + 0x12) /* EP1-2 IN CSR LSB 8/16bit */
#define USB_REG_INCSRH (USB_BASE + 0x13) /* EP1-2 IN CSR MSB 8-bit */
#define USB_REG_OUTMAXP (USB_BASE + 0x14) /* EP1 OUT Max Pkt Size 16-bit */
#define USB_REG_OUTCSR (USB_BASE + 0x16) /* EP1 OUT CSR LSB 8/16bit */
#define USB_REG_OUTCSRH (USB_BASE + 0x17) /* EP1 OUT CSR MSB 8-bit */
#define USB_REG_OUTCOUNT (USB_BASE + 0x18) /* bytes in EP0/1 OUT FIFO 16-bit */
#define USB_FIFO_EP0 (USB_BASE + 0x20)
#define USB_FIFO_EP1 (USB_BASE + 0x24)
#define USB_FIFO_EP2 (USB_BASE + 0x28)
#define USB_REG_EPINFO (USB_BASE + 0x78) /* Endpoint information */
#define USB_REG_RAMINFO (USB_BASE + 0x79) /* RAM information */
#define USB_REG_INTR (USB_BASE + 0x200) /* DMA pending interrupts */
#define USB_REG_CNTL1 (USB_BASE + 0x204) /* DMA channel 1 control */
#define USB_REG_ADDR1 (USB_BASE + 0x208) /* DMA channel 1 AHB memory addr */
#define USB_REG_COUNT1 (USB_BASE + 0x20c) /* DMA channel 1 byte count */
#define USB_REG_CNTL2 (USB_BASE + 0x214) /* DMA channel 2 control */
#define USB_REG_ADDR2 (USB_BASE + 0x218) /* DMA channel 2 AHB memory addr */
#define USB_REG_COUNT2 (USB_BASE + 0x21c) /* DMA channel 2 byte count */
/* Power register bit masks */
#define USB_POWER_SUSPENDM 0x01
#define USB_POWER_RESUME 0x04
#define USB_POWER_HSMODE 0x10
#define USB_POWER_HSENAB 0x20
#define USB_POWER_SOFTCONN 0x40
/* Interrupt register bit masks */
#define USB_INTR_SUSPEND 0x01
#define USB_INTR_RESUME 0x02
#define USB_INTR_RESET 0x04
#define USB_INTR_EP0 0x0001
#define USB_INTR_INEP1 0x0002
#define USB_INTR_INEP2 0x0004
#define USB_INTR_OUTEP1 0x0002
/* CSR0 bit masks */
#define USB_CSR0_OUTPKTRDY 0x01
#define USB_CSR0_INPKTRDY 0x02
#define USB_CSR0_SENTSTALL 0x04
#define USB_CSR0_DATAEND 0x08
#define USB_CSR0_SETUPEND 0x10
#define USB_CSR0_SENDSTALL 0x20
#define USB_CSR0_SVDOUTPKTRDY 0x40
#define USB_CSR0_SVDSETUPEND 0x80
/* Endpoint CSR register bits */
#define USB_INCSRH_AUTOSET 0x80
#define USB_INCSRH_ISO 0x40
#define USB_INCSRH_MODE 0x20
#define USB_INCSRH_DMAREQENAB 0x10
#define USB_INCSRH_DMAREQMODE 0x04
#define USB_INCSR_CDT 0x40
#define USB_INCSR_SENTSTALL 0x20
#define USB_INCSR_SENDSTALL 0x10
#define USB_INCSR_FF 0x08
#define USB_INCSR_UNDERRUN 0x04
#define USB_INCSR_FFNOTEMPT 0x02
#define USB_INCSR_INPKTRDY 0x01
#define USB_OUTCSRH_AUTOCLR 0x80
#define USB_OUTCSRH_ISO 0x40
#define USB_OUTCSRH_DMAREQENAB 0x20
#define USB_OUTCSRH_DNYT 0x10
#define USB_OUTCSRH_DMAREQMODE 0x08
#define USB_OUTCSR_CDT 0x80
#define USB_OUTCSR_SENTSTALL 0x40
#define USB_OUTCSR_SENDSTALL 0x20
#define USB_OUTCSR_FF 0x10
#define USB_OUTCSR_DATAERR 0x08
#define USB_OUTCSR_OVERRUN 0x04
#define USB_OUTCSR_FFFULL 0x02
#define USB_OUTCSR_OUTPKTRDY 0x01
/* Testmode register bits */
#define USB_TEST_SE0NAK 0x01
#define USB_TEST_J 0x02
#define USB_TEST_K 0x04
#define USB_TEST_PACKET 0x08
/* DMA control bits */
#define USB_CNTL_ENA 0x01
#define USB_CNTL_DIR_IN 0x02
#define USB_CNTL_MODE_1 0x04
#define USB_CNTL_INTR_EN 0x08
#define USB_CNTL_EP(n) ((n) << 4)
#define USB_CNTL_BURST_0 (0 << 9)
#define USB_CNTL_BURST_4 (1 << 9)
#define USB_CNTL_BURST_8 (2 << 9)
#define USB_CNTL_BURST_16 (3 << 9)
/*************************************************************************
* BCH
*************************************************************************/
#define BCH_CR (BCH_BASE + 0x00) /* BCH Control register */
#define BCH_CRS (BCH_BASE + 0x04) /* BCH Control Set register */
#define BCH_CRC (BCH_BASE + 0x08) /* BCH Control Clear register */
#define BCH_CNT (BCH_BASE + 0x0C) /* BCH ENC/DEC Count register */
#define BCH_DR (BCH_BASE + 0x10) /* BCH data register */
#define BCH_PAR0 (BCH_BASE + 0x14) /* BCH Parity 0 register */
#define BCH_PAR1 (BCH_BASE + 0x18) /* BCH Parity 1 register */
#define BCH_PAR2 (BCH_BASE + 0x1C) /* BCH Parity 2 register */
#define BCH_PAR3 (BCH_BASE + 0x20) /* BCH Parity 3 register */
#define BCH_INTS (BCH_BASE + 0x24) /* BCH Interrupt Status register */
#define BCH_ERR0 (BCH_BASE + 0x28) /* BCH Error Report 0 register */
#define BCH_ERR1 (BCH_BASE + 0x2C) /* BCH Error Report 1 register */
#define BCH_ERR2 (BCH_BASE + 0x30) /* BCH Error Report 2 register */
#define BCH_ERR3 (BCH_BASE + 0x34) /* BCH Error Report 3 register */
#define BCH_INTE (BCH_BASE + 0x38) /* BCH Interrupt Enable register */
#define BCH_INTES (BCH_BASE + 0x3C) /* BCH Interrupt Set register */
#define BCH_INTEC (BCH_BASE + 0x40) /* BCH Interrupt Clear register */
#define REG_BCH_CR REG32(BCH_CR)
#define REG_BCH_CRS REG32(BCH_CRS)
#define REG_BCH_CRC REG32(BCH_CRC)
#define REG_BCH_CNT REG32(BCH_CNT)
#define REG_BCH_DR REG8(BCH_DR)
#define REG_BCH_PAR0 REG32(BCH_PAR0)
#define REG_BCH_PAR1 REG32(BCH_PAR1)
#define REG_BCH_PAR2 REG32(BCH_PAR2)
#define REG_BCH_PAR3 REG32(BCH_PAR3)
#define REG_BCH_INTS REG32(BCH_INTS)
#define REG_BCH_ERR0 REG32(BCH_ERR0)
#define REG_BCH_ERR1 REG32(BCH_ERR1)
#define REG_BCH_ERR2 REG32(BCH_ERR2)
#define REG_BCH_ERR3 REG32(BCH_ERR3)
#define REG_BCH_INTE REG32(BCH_INTE)
#define REG_BCH_INTEC REG32(BCH_INTEC)
#define REG_BCH_INTES REG32(BCH_INTES)
/* BCH Control Register*/
#define BCH_CR_DMAE (1 << 4) /* BCH DMA Enable */
#define BCH_CR_ENCE (1 << 3) /* BCH Encoding Select */
#define BCH_CR_DECE (0 << 3) /* BCH Decoding Select */
#define BCH_CR_BSEL8 (1 << 2) /* 8 Bit BCH Select */
#define BCH_CR_BSEL4 (0 << 2) /* 4 Bit BCH Select */
#define BCH_CR_BRST (1 << 1) /* BCH Reset */
#define BCH_CR_BCHE (1 << 0) /* BCH Enable */
/* BCH Interrupt Status Register */
#define BCH_INTS_ERRC_BIT 28
#define BCH_INTS_ERRC_MASK (0xf << BCH_INTS_ERRC_BIT)
#define BCH_INTS_ALL0 (1 << 5)
#define BCH_INTS_ALLf (1 << 4)
#define BCH_INTS_DECF (1 << 3)
#define BCH_INTS_ENCF (1 << 2)
#define BCH_INTS_UNCOR (1 << 1)
#define BCH_INTS_ERR (1 << 0)
/* BCH ENC/DEC Count Register */
#define BCH_CNT_DEC_BIT 16
#define BCH_CNT_DEC_MASK (0x3ff << BCH_CNT_DEC_BIT)
#define BCH_CNT_ENC_BIT 0
#define BCH_CNT_ENC_MASK (0x3ff << BCH_CNT_ENC_BIT)
/* BCH Error Report Register */
#define BCH_ERR_INDEX_ODD_BIT 16
#define BCH_ERR_INDEX_ODD_MASK (0x1fff << BCH_ERR_INDEX_ODD_BIT)
#define BCH_ERR_INDEX_EVEN_BIT 0
#define BCH_ERR_INDEX_EVEN_MASK (0x1fff << BCH_ERR_INDEX_EVEN_BIT)
/*************************************************************************
* OWI (One-wire Bus Controller )
*************************************************************************/
#define OWI_CFG (OWI_BASE + 0x00) /* OWI Configure Register */
#define OWI_CTL (OWI_BASE + 0x04) /* OWI Control Register */
#define OWI_STS (OWI_BASE + 0x08) /* OWI Status Register */
#define OWI_DAT (OWI_BASE + 0x0c) /* OWI Data Register */
#define OWI_DIV (OWI_BASE + 0x10) /* OWI Clock Divide Register */
#define REG_OWI_CFG REG8(OWI_CFG)
#define REG_OWI_CTL REG8(OWI_CTL)
#define REG_OWI_STS REG8(OWI_STS)
#define REG_OWI_DAT REG8(OWI_DAT)
#define REG_OWI_DIV REG8(OWI_DIV)
/* OWI Configure Register */
#define OWI_CFG_MODE (1 << 7) /* 0: Regular speed mode 1: Overdrive speed mode */
#define OWI_CFG_RDDATA (1 << 6) /* 1: receive data from one-wire bus and stored in OWDAT*/
#define OWI_CFG_WRDATA (1 << 5) /* 1: transmit the data in OWDAT */
#define OWI_CFG_RDST (1 << 4) /* 1: was sampled during a read */
#define OWI_CFG_WR1RD (1 << 3) /* 1: generate write 1 sequence on line */
#define OWI_CFG_WR0 (1 << 2) /* 1: generate write 0 sequence on line */
#define OWI_CFG_RST (1 << 1) /* 1: generate reset pulse and sample slaves presence pulse*/
#define OWI_CFG_ENA (1 << 0) /* 1: enable the OWI operation */
/* OWI Control Register */
#define OWI_CTL_EBYTE (1 << 2) /* enable byte write/read interrupt */
#define OWI_CTL_EBIT (1 << 1) /* enable bit write/read interrupt */
#define OWI_CTL_ERST (1 << 0) /* enable reset sequence finished interrupt */
/* OWI Status Register */
#define OWI_STS_PST (1 << 7) /* 1: one-wire bus has device on it */
#define OWI_STS_BYTE_RDY (1 << 2) /* 1: have received or transmitted a data */
#define OWI_STS_BIT_RDY (1 << 1) /* 1: have received or transmitted a bit */
#define OWI_STS_PST_RDY (1 << 0) /* 1: have finished a reset pulse */
/* OWI Clock Divide Register */
#define OWI_DIV_CLKDIV_BIT 5
/*************************************************************************
* MC (Motion Compensation)
*************************************************************************/
#define MC_CTRL (MC_BASE + 0x00) /* MC Control Register */
#define MC_STAT (MC_BASE + 0x04) /* MC Status Register */
#define MC_REF_ADDR (MC_BASE + 0x08) /* MC Reference Block Address Register */
#define MC_REF2_ADDR (MC_BASE + 0x0C) /* MC 2nd Reference Block Address Register */
#define MC_CURR_ADDR (MC_BASE + 0x10) /* MC Current Block Address Register */
#define MC_REF_STRD (MC_BASE + 0x14) /* MC Reference Frame Stride Register */
#define MC_CURR_STRD (MC_BASE + 0x18) /* MC Current Frame Stride Register */
#define MC_ITP_INFO (MC_BASE + 0x1C) /* MC Block Interpolation Information Register */
#define MC_TAP_COEF1 (MC_BASE + 0x20) /* MC TAP Filter Coefficient 1 Register */
#define MC_TAP_COEF2 (MC_BASE + 0x24) /* MC TAP Filter Coefficient 2 Register */
#define REG_MC_CTRL REG32(MC_CTRL)
#define REG_MC_STAT REG32(MC_STAT)
#define REG_MC_REF_ADDR REG32(MC_REF_ADDR)
#define REG_MC_REF2_ADDR REG32(MC_REF2_ADDR)
#define REG_MC_CURR_ADDR REG32(MC_CURR_ADDR)
#define REG_MC_REF_STRD REG32(MC_REF_STRD)
#define REG_MC_CURR_STRD REG32(MC_CURR_STRD)
#define REG_MC_ITP_INFO REG32(MC_ITP_INFO)
#define REG_MC_TAP_COEF1 REG32(MC_TAP_COEF1)
#define REG_MC_TAP_COEF2 REG32(MC_TAP_COEF2)
/* MC Control Register */
#define MC_CTRL_CACHECLR (1 << 2) /* MC Cache clear */
#define MC_CTRL_RESET (1 << 1) /* MC Reset */
#define MC_CTRL_ENABLE (1 << 0) /* MC enable */
/* MC Status Register */
#define MC_STAT_OUT_END (1 << 0) /* Output DMA termination flag */
/* MC Reference Frame Stride Register, unit: byte */
#define MC_REF_STRD_BIT 16
#define MC_REF_STRD_MASK (0xfff << MC_REF_STRD_BIT)
#define MC_REF_STRD2_BIT 0
#define MC_REF_STRD2_MASK (0xfff << MC_REF_STRD2_BIT)
/* MC Current Frame Stride Register, unit: byte */
#define MC_CURR_STRD_BIT 0
#define MC_CURR_STRD_MASK (0xfff << MC_CURR_STRD_BIT)
/* MC Block Interpolation Information Register */
#define MC_ITP_INFO_RND1_BIT 24 /* Rounding data during interpolation */
#define MC_ITP_INFO_RND1_MASK (0xff << MC_ITP_INFO_RND1_BIT)
#define MC_ITP_INFO_RND0_BIT 16 /* Rounding data during interpolation */
#define MC_ITP_INFO_RND0_MASK (0xff << MC_ITP_INFO_RND0_BIT)
#define MC_ITP_INFO_AVG (1 << 12) /* 0: output interpolated data directly; 1: doing average operation with 2nd source data after interpolating and output */
#define MC_ITP_INFO_FMT_BIT 8 /* Indicate current interpolation's type */
#define MC_ITP_INFO_RMT_MASK (0xf << MC_ITP_INFO_RMT_BIT)
#define MC_ITP_INFO_FMT_MPEG_HPEL (0x0 << MC_ITP_INFO_RMT_BIT) /* MPEG Half-pixel interpolation */
#define MC_ITP_INFO_FMT_MPEG_QPEL (0x1 << MC_ITP_INFO_RMT_BIT) /* MPEG 8-tap Quarter-pixel interpolation */
#define MC_ITP_INFO_FMT_H264_QPEL (0x2 << MC_ITP_INFO_RMT_BIT) /* H264 6-tap Quarter-pixel interpolation */
#define MC_ITP_INFO_FMT_H264_EPEL (0x3 << MC_ITP_INFO_RMT_BIT) /* H264 2-tap Eight-pixel interpolation */
#define MC_ITP_INFO_FMT_H264_WPDT (0x4 << MC_ITP_INFO_RMT_BIT) /* H264 Weighted-prediction */
#define MC_ITP_INFO_FMT_WMV2_QPEL (0x5 << MC_ITP_INFO_RMT_BIT) /* WMV2 4-tap Quarter-pixel interpolation */
#define MC_ITP_INFO_FMT_VC1_QPEL (0x6 << MC_ITP_INFO_RMT_BIT) /* VC1 4-tap Quarter-pixel interpolation */
#define MC_ITP_INFO_FMT_RV8_TPEL (0x7 << MC_ITP_INFO_RMT_BIT) /* RV8 4-tap Third-pixel interpolation */
#define MC_ITP_INFO_FMT_RV8_CHROM (0x8 << MC_ITP_INFO_RMT_BIT) /* RV8 2-tap Third-pixel interpolation */
#define MC_ITP_INFO_FMT_RV9_QPEL (0x9 << MC_ITP_INFO_RMT_BIT) /* RV9 6-tap Quarter-pixel interpolation */
#define MC_ITP_INFO_FMT_RV9_CHROM (0xa << MC_ITP_INFO_RMT_BIT) /* RV9 2-tap Quarter-pixel interpolation */
#define MC_ITP_INFO_BLK_W_BIT 6 /* Indicate reference block's width, unit: pixel */
#define MC_ITP_INFO_BLK_W_MASK (0x3 << MC_ITP_INFO_BLK_W_BIT)
#define MC_ITP_INFO_BLK_W_2 (0x0 << MC_ITP_INFO_BLK_W_BIT)
#define MC_ITP_INFO_BLK_W_4 (0x1 << MC_ITP_INFO_BLK_W_BIT)
#define MC_ITP_INFO_BLK_W_8 (0x2 << MC_ITP_INFO_BLK_W_BIT)
#define MC_ITP_INFO_BLK_W_16 (0x3 << MC_ITP_INFO_BLK_W_BIT)
#define MC_ITP_INFO_BLK_H_BIT 4 /* Indicate reference block's height, unit: pixel */
#define MC_ITP_INFO_BLK_H_MASK (0x3 << MC_ITP_INFO_BLK_H_BIT)
#define MC_ITP_INFO_BLK_H_2 (0x0 << MC_ITP_INFO_BLK_H_BIT)
#define MC_ITP_INFO_BLK_H_4 (0x1 << MC_ITP_INFO_BLK_H_BIT)
#define MC_ITP_INFO_BLK_H_8 (0x2 << MC_ITP_INFO_BLK_H_BIT)
#define MC_ITP_INFO_BLK_H_16 (0x3 << MC_ITP_INFO_BLK_H_BIT)
#define MC_ITP_INFO_ITP_CASE_BIT 0 /* Indicate interpolation final destination pixel position */
#define MC_ITP_INFO_ITP_CASE_MASK (0xf << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H0V0 (0x0 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H1V0 (0x1 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H2V0 (0x2 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H3V0 (0x3 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H0V1 (0x4 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H1V1 (0x5 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H2V1 (0x6 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H3V1 (0x7 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H0V2 (0x8 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H1V2 (0x9 << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H2V2 (0xa << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H3V2 (0xb << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H0V3 (0xc << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H1V3 (0xd << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H2V3 (0xe << MC_ITP_INFO_ITP_CASE_BIT)
#define MC_ITP_INFO_ITP_CASE_H3V3 (0xf << MC_ITP_INFO_ITP_CASE_BIT)
/* MC TAP Filter Coefficient 1 Register */
#define MC_TAP_COEF1_TAP_COEF4_BIT 24
#define MC_TAP_COEF1_TAP_COEF4_MASK (0xff << MC_TAP_COEF1_TAP_COEF4_BIT)
#define MC_TAP_COEF1_TAP_COEF3_BIT 16
#define MC_TAP_COEF1_TAP_COEF3_MASK (0xff << MC_TAP_COEF1_TAP_COEF3_BIT)
#define MC_TAP_COEF1_TAP_COEF2_BIT 8
#define MC_TAP_COEF1_TAP_COEF2_MASK (0xff << MC_TAP_COEF1_TAP_COEF2_BIT)
#define MC_TAP_COEF1_TAP_COEF1_BIT 0
#define MC_TAP_COEF1_TAP_COEF1_MASK (0xff << MC_TAP_COEF1_TAP_COEF1_BIT)
/* MC TAP Filter Coefficient 2 Register */
#define MC_TAP_COEF2_TAP_COEF8_BIT 24
#define MC_TAP_COEF2_TAP_COEF8_MASK (0xff << MC_TAP_COEF2_TAP_COEF8_BIT)
#define MC_TAP_COEF2_TAP_COEF7_BIT 16
#define MC_TAP_COEF2_TAP_COEF7_MASK (0xff << MC_TAP_COEF2_TAP_COEF7_BIT)
#define MC_TAP_COEF2_TAP_COEF6_BIT 8
#define MC_TAP_COEF2_TAP_COEF6_MASK (0xff << MC_TAP_COEF2_TAP_COEF6_BIT)
#define MC_TAP_COEF2_TAP_COEF5_BIT 0
#define MC_TAP_COEF2_TAP_COEF5_MASK (0xff << MC_TAP_COEF2_TAP_COEF5_BIT)
/*************************************************************************
* ME (Motion Estimation)
*************************************************************************/
#define ME_CTRL (ME_BASE + 0x00) /* ME Control Register */
#define ME_REF_ADDR (ME_BASE + 0x04) /* ME Reference Block Address Register */
#define ME_CURR_ADDR (ME_BASE + 0x08) /* ME Current Block Address Register */
#define ME_DIFF_ADDR (ME_BASE + 0x0C) /* ME Difference Address Register */
#define ME_REF_STRD (ME_BASE + 0x10) /* ME Reference Frame Stride Register */
#define ME_CURR_STRD (ME_BASE + 0x14) /* ME Current Frame Stride Register */
#define ME_DIFF_STRD (ME_BASE + 0x18) /* ME Difference Frame Stride Register */
#define ME_SETTINGS (ME_BASE + 0x1C) /* ME Settings Register */
#define ME_MVD (ME_BASE + 0x20) /* ME Motion Vector Difference Register */
#define ME_FLAG (ME_BASE + 0x24) /* ME Flag Register */
#define REG_ME_CTRL REG32(ME_CTRL)
#define REG_ME_REF_ADDR REG32(ME_REF_ADDR)
#define REG_ME_CURR_ADDR REG32(ME_CURR_ADDR)
#define REG_ME_DIFF_ADDR REG32(ME_DIFF_ADDR)
#define REG_ME_REF_STRD REG32(ME_REF_STRD)
#define REG_ME_CURR_STRD REG32(ME_CURR_STRD)
#define REG_ME_DIFF_STRD REG32(ME_DIFF_STRD)
#define REG_ME_SETTINGS REG32(ME_SETTINGS)
#define REG_ME_MVD REG32(ME_MVD)
#define REG_ME_FLAG REG32(ME_FLAG)
/* ME Control Register */
#define ME_CTRL_FLUSH (1 << 2) /* ME cache clear */
#define ME_CTRL_RESET (1 << 1) /* ME reset */
#define ME_CTRL_ENABLE (1 << 0) /* ME enable */
/* ME Settings Register */
#define ME_SETTINGS_SAD_GATE_BIT 16 /* The max SAD value which can be accepted */
#define ME_SETTINGS_SAD_GATE_MASK (0xffff << ME_SETTINGS_SAD_GATE_BIT)
#define ME_SETTINGS_STEP_NUM_BIT 0 /* The max step number the search process can not exceed */
#define ME_SETTINGS_STEP_NUM_MASK (0x3f << ME_SETTINGS_STEP_NUM_BIT)
/* ME Motion Vector Difference Register */
#define ME_MVD_MVDY_BIT 16 /* The MVD value of coordinate-Y */
#define ME_MVD_MVDY_MASK (0xffff << ME_MVD_MVDY_BIT)
#define ME_MVD_MVDX_BIT 0 /* The MVD value of coordinate-X */
#define ME_MVD_MVDX_MASK (0xffff << ME_MVD_MVDX_BIT)
/* ME Flag Register */
#define ME_FLAG_INTRA (1 << 1) /* Indicate the current MB will be predicted in intra mode */
#define ME_FLAG_COMPLETED (1 << 0) /* The ME of the current part of the MB is completed */
/*************************************************************************
* OTP (One Time Programmable Module)
*************************************************************************/
#define OTP_ID0 (OTP_BASE + 0x00) /* ID0 Register */
#define OTP_ID1 (OTP_BASE + 0x04) /* ID1 Register */
#define OTP_ID2 (OTP_BASE + 0x08) /* ID2 Register */
#define OTP_ID3 (OTP_BASE + 0x0C) /* ID3 Register */
#define OTP_BR0 (OTP_BASE + 0x10) /* BOOTROM0 Register */
#define OTP_BR1 (OTP_BASE + 0x14) /* BOOTROM1 Register */
#define OTP_HW0 (OTP_BASE + 0x18) /* Chip Hardware 0 Register */
#define OTP_HW1 (OTP_BASE + 0x1C) /* Chip Hardware 1 Register */
#define REG_OTP_ID0 REG32(OTP_ID0)
#define REG_OTP_ID1 REG32(OTP_ID1)
#define REG_OTP_ID2 REG32(OTP_ID2)
#define REG_OTP_ID3 REG32(OTP_ID3)
#define REG_OTP_BR0 REG32(OTP_BR0)
#define REG_OTP_BR1 REG32(OTP_BR1)
#define REG_OTP_HW0 REG32(OTP_HW0)
#define REG_OTP_HW1 REG32(OTP_HW1)
/* ID0 Register */
#define OTP_ID0_WID_BIT 24 /* Wafer ID */
#define OTP_ID0_WID_MASK (0xff << OTP_ID0_WID_BIT)
#define OTP_ID0_MID_BIT 16 /* MASK ID */
#define OTP_ID0_MID_MASK (0xff << OTP_ID0_MID_BIT)
#define OTP_ID0_FID_BIT 8 /* Foundary ID */
#define OTP_ID0_FID_MASK (0xff << OTP_ID0_FID_BIT)
#define OTP_ID0_PID_BIT 0 /* Product ID */
#define OTP_ID0_PID_MASK (0xff << OTP_ID0_PID_BIT)
/* ID1 Register */
#define OTP_ID1_LID_BIT 8 /* Lot ID */
#define OTP_ID1_LID_MASK (0xffffff << OTP_ID1_LID_BIT)
#define OTP_ID1_TID_BIT 0 /* Test House ID */
#define OTP_ID1_TID_MASK (0xff << OTP_ID1_TID_BIT)
/* ID2 Register */
#define OTP_ID2_XADR_BIT 24 /* Die X-dir Address */
#define OTP_ID2_XADR_MASK (0xff << OTP_ID2_XADR_BIT)
#define OTP_ID2_YADR_BIT 16 /* Die Y-dir Address */
#define OTP_ID2_YADR_MASK (0xff << OTP_ID2_YADR_BIT)
#define OTP_ID2_TDATE_BIT 0 /* Testing Date */
#define OTP_ID2_TDATE_MASK (0xffff << OTP_ID2_TDATE_BIT)
/* ID3 Register */
#define OTP_ID3_CID_BIT 16 /* Customer ID */
#define OTP_ID3_CID_MASK (0xffff << OTP_ID3_CID_BIT)
#define OTP_ID3_CP_BIT 0 /* Chip Parameters */
#define OTP_ID3_CP_MASK (0xffff << OTP_ID3_CP_BIT)
/* BOOTROM1 Register */
#define OTP_BR1_UDCBOOT_BIT 0
#define OTP_BR1_UDCBOOT_MASK (0xff << OTP_BR1_UDCBOOT_BIT)
#define OTP_BR1_UDCBOOT_AUTO (0xf0 << OTP_BR1_UDCBOOT_BIT)
#define OTP_BR1_UDCBOOT_24M (0x0f << OTP_BR1_UDCBOOT_BIT) /* 24MHz OSC */
#define OTP_BR1_UDCBOOT_13M (0x0c << OTP_BR1_UDCBOOT_BIT) /* 13MHz OSC */
#define OTP_BR1_UDCBOOT_26M (0x03 << OTP_BR1_UDCBOOT_BIT) /* 26MHz OSC */
#define OTP_BR1_UDCBOOT_27M (0x00 << OTP_BR1_UDCBOOT_BIT) /* 27MHz OSC */
/* Chip Hardware 1 Register */
#define OTP_HW1_MC_EN (0x3 << 30) /* MC is enabled */
#define OTP_HW1_ME_EN (0x3 << 28)
#define OTP_HW1_DE_EN (0x3 << 26)
#define OTP_HW1_IDCT_EN (0x3 << 24)
#define OTP_HW1_UART3_EN (0x3 << 22)
#define OTP_HW1_UART2_EN (0x3 << 20)
#define OTP_HW1_UART1_EN (0x3 << 18)
#define OTP_HW1_UART0_EN (0x3 << 16)
#define OTP_HW1_SSI1_EN (0x3 << 14)
#define OTP_HW1_SSI0_EN (0x3 << 12)
#define OTP_HW1_MSC1_EN (0x3 << 10)
#define OTP_HW1_MSC0_EN (0x3 << 8)
#define OTP_HW1_UHC_EN (0x3 << 6)
#define OTP_HW1_TVE_EN (0x3 << 4)
#define OTP_HW1_TSSI_EN (0x3 << 2)
#define OTP_HW1_CIM_EN (0x3 << 0)
/*************************************************************************
* TSSI MPEG 2-TS slave interface
*************************************************************************/
#define TSSI_ENA ( TSSI0_BASE + 0x00 ) /* TSSI enable register */
#define TSSI_CFG ( TSSI0_BASE + 0x04 ) /* TSSI configure register */
#define TSSI_CTRL ( TSSI0_BASE + 0x08 ) /* TSSI control register */
#define TSSI_STAT ( TSSI0_BASE + 0x0c ) /* TSSI state register */
#define TSSI_FIFO ( TSSI0_BASE + 0x10 ) /* TSSI FIFO register */
#define TSSI_PEN ( TSSI0_BASE + 0x14 ) /* TSSI PID enable register */
#define TSSI_PID(n) ( TSSI0_BASE + 0x20 + 4*(n) ) /* TSSI PID filter register */
#define TSSI_PID0 ( TSSI0_BASE + 0x20 )
#define TSSI_PID1 ( TSSI0_BASE + 0x24 )
#define TSSI_PID2 ( TSSI0_BASE + 0x28 )
#define TSSI_PID3 ( TSSI0_BASE + 0x2c )
#define TSSI_PID4 ( TSSI0_BASE + 0x30 )
#define TSSI_PID5 ( TSSI0_BASE + 0x34 )
#define TSSI_PID6 ( TSSI0_BASE + 0x38 )
#define TSSI_PID7 ( TSSI0_BASE + 0x3c )
#define TSSI_PID_MAX 8 /* max PID: 7 */
#define REG_TSSI_ENA REG8( TSSI_ENA )
#define REG_TSSI_CFG REG16( TSSI_CFG )
#define REG_TSSI_CTRL REG8( TSSI_CTRL )
#define REG_TSSI_STAT REG8( TSSI_STAT )
#define REG_TSSI_FIFO REG32( TSSI_FIFO )
#define REG_TSSI_PEN REG32( TSSI_PEN )
#define REG_TSSI_PID(n) REG32( TSSI_PID(n) )
#define REG_TSSI_PID0 REG32( TSSI_PID0 )
#define REG_TSSI_PID1 REG32( TSSI_PID1 )
#define REG_TSSI_PID2 REG32( TSSI_PID2 )
#define REG_TSSI_PID3 REG32( TSSI_PID3 )
#define REG_TSSI_PID4 REG32( TSSI_PID4 )
#define REG_TSSI_PID5 REG32( TSSI_PID5 )
#define REG_TSSI_PID6 REG32( TSSI_PID6 )
#define REG_TSSI_PID7 REG32( TSSI_PID7 )
/* TSSI enable register */
#define TSSI_ENA_SFT_RST ( 1 << 7 ) /* soft reset bit */
#define TSSI_ENA_PID_EN ( 1 << 2 ) /* soft filtering function enable bit */
#define TSSI_ENA_DMA_EN ( 1 << 1 ) /* DMA enable bit */
#define TSSI_ENA_ENA ( 1 << 0 ) /* TSSI enable bit */
/* TSSI configure register */
#define TSSI_CFG_TRIG_BIT 14 /* fifo trig number */
#define TSSI_CFG_TRIG_MASK ( 0x3 << TSSI_CFG_TRIG_BIT)
#define TSSI_CFG_TRIG_4 ( 0 << TSSI_CFG_TRIG_BIT)
#define TSSI_CFG_TRIG_8 ( 1 << TSSI_CFG_TRIG_BIT)
#define TSSI_CFG_TRIG_16 ( 2 << TSSI_CFG_TRIG_BIT)
#define TSSI_CFG_END_WD ( 1 << 9 ) /* order of data in word */
#define TSSI_CFG_END_BT ( 1 << 8 ) /* order of data in byte */
#define TSSI_CFG_TSDI_H ( 1 << 7 ) /* data pin polarity */
#define TSSI_CFG_USE_0 ( 1 << 6 ) /* serial mode data pin select */
#define TSSI_CFG_USE_TSDI0 ( 0 << 6 ) /* TSDI0 as serial mode data pin */
#define TSSI_CFG_USE_TSDI7 ( 1 << 6 ) /* TSDI7 as serial mode data pin */
#define TSSI_CFG_TSCLK_CH ( 1 << 5 ) /* clk channel select */
#define TSSI_CFG_PARAL ( 1 << 4 ) /* mode select */
#define TSSI_CFG_PARAL_MODE ( 1 << 4 ) /* parallel select */
#define TSSI_CFG_SERIAL_MODE ( 0 << 4 ) /* serial select */
#define TSSI_CFG_TSCLK_P ( 1 << 3 ) /* clk edge select */
#define TSSI_CFG_TSFRM_H ( 1 << 2 ) /* TSFRM polarity select */
#define TSSI_CFG_TSSTR_H ( 1 << 1 ) /* TSSTR polarity select */
#define TSSI_CFG_TSFAIL_H ( 1 << 0 ) /* TSFAIL polarity select */
/* TSSI control register */
#define TSSI_CTRL_OVRNM ( 1 << 1 ) /* FIFO overrun interrupt mask bit */
#define TSSI_CTRL_TRIGM ( 1 << 0 ) /* FIFO trigger interrupt mask bit */
/* TSSI state register */
#define TSSI_STAT_OVRN ( 1 << 1 ) /* FIFO overrun interrupt flag bit */
#define TSSI_STAT_TRIG ( 1 << 0 ) /* FIFO trigger interrupt flag bit */
/* TSSI PID enable register */
#define TSSI_PEN_EN00 ( 1 << 0 ) /* enable PID n */
#define TSSI_PEN_EN10 ( 1 << 1 )
#define TSSI_PEN_EN20 ( 1 << 2 )
#define TSSI_PEN_EN30 ( 1 << 3 )
#define TSSI_PEN_EN40 ( 1 << 4 )
#define TSSI_PEN_EN50 ( 1 << 5 )
#define TSSI_PEN_EN60 ( 1 << 6 )
#define TSSI_PEN_EN70 ( 1 << 7 )
#define TSSI_PEN_EN01 ( 1 << 16 )
#define TSSI_PEN_EN11 ( 1 << 17 )
#define TSSI_PEN_EN21 ( 1 << 18 )
#define TSSI_PEN_EN31 ( 1 << 19 )
#define TSSI_PEN_EN41 ( 1 << 20 )
#define TSSI_PEN_EN51 ( 1 << 21 )
#define TSSI_PEN_EN61 ( 1 << 22 )
#define TSSI_PEN_EN71 ( 1 << 23 )
#define TSSI_PEN_PID0 ( 1 << 31 ) /* PID filter enable PID0 */
/* TSSI PID Filter Registers */
#define TSSI_PID_PID1_BIT 16
#define TSSI_PID_PID1_MASK (0x1FFF<<TSSI_PID_PID1_BIT)
#define TSSI_PID_PID0_BIT 0
#define TSSI_PID_PID0_MASK (0x1FFF<<TSSI_PID_PID0_BIT)
/*************************************************************************
* IPU (Image Processing Unit)
*************************************************************************/
#define IPU_V_BASE 0xB3080000
#define IPU_P_BASE 0x13080000
/* Register offset */
#define REG_CTRL 0x0 /* IPU Control Register */
#define REG_STATUS 0x4 /* IPU Status Register */
#define REG_D_FMT 0x8 /* Data Format Register */
#define REG_Y_ADDR 0xc /* Input Y or YUV422 Packaged Data Address Register */
#define REG_U_ADDR 0x10 /* Input U Data Address Register */
#define REG_V_ADDR 0x14 /* Input V Data Address Register */
#define REG_IN_FM_GS 0x18 /* Input Geometric Size Register */
#define REG_Y_STRIDE 0x1c /* Input Y Data Line Stride Register */
#define REG_UV_STRIDE 0x20 /* Input UV Data Line Stride Register */
#define REG_OUT_ADDR 0x24 /* Output Frame Start Address Register */
#define REG_OUT_GS 0x28 /* Output Geometric Size Register */
#define REG_OUT_STRIDE 0x2c /* Output Data Line Stride Register */
#define REG_RSZ_COEF_INDEX 0x30 /* Resize Coefficients Table Index Register */
#define REG_CSC_CO_COEF 0x34 /* CSC C0 Coefficient Register */
#define REG_CSC_C1_COEF 0x38 /* CSC C1 Coefficient Register */
#define REG_CSC_C2_COEF 0x3c /* CSC C2 Coefficient Register */
#define REG_CSC_C3_COEF 0x40 /* CSC C3 Coefficient Register */
#define REG_CSC_C4_COEF 0x44 /* CSC C4 Coefficient Register */
#define HRSZ_LUT_BASE 0x48 /* Horizontal Resize Coefficients Look Up Table Register group */
#define VRSZ_LUT_BASE 0x4c /* Virtical Resize Coefficients Look Up Table Register group */
#define REG_CSC_OFSET_PARA 0x50 /* CSC Offset Parameter Register */
#define REG_Y_PHY_T_ADDR 0x54 /* Input Y Physical Table Address Register */
#define REG_U_PHY_T_ADDR 0x58 /* Input U Physical Table Address Register */
#define REG_V_PHY_T_ADDR 0x5c /* Input V Physical Table Address Register */
#define REG_OUT_PHY_T_ADDR 0x60 /* Output Physical Table Address Register */
/* REG_CTRL: IPU Control Register */
#define IPU_CE_SFT 0x0
#define IPU_CE_MSK 0x1
#define IPU_RUN_SFT 0x1
#define IPU_RUN_MSK 0x1
#define HRSZ_EN_SFT 0x2
#define HRSZ_EN_MSK 0x1
#define VRSZ_EN_SFT 0x3
#define VRSZ_EN_MSK 0x1
#define CSC_EN_SFT 0x4
#define CSC_EN_MSK 0x1
#define FM_IRQ_EN_SFT 0x5
#define FM_IRQ_EN_MSK 0x1
#define IPU_RST_SFT 0x6
#define IPU_RST_MSK 0x1
#define H_SCALE_SFT 0x8
#define H_SCALE_MSK 0x1
#define V_SCALE_SFT 0x9
#define V_SCALE_MSK 0x1
#define PKG_SEL_SFT 0xA
#define PKG_SEL_MSK 0x1
#define LCDC_SEL_SFT 0xB
#define LCDC_SEL_MSK 0x1
#define SPAGE_MAP_SFT 0xC
#define SPAGE_MAP_MSK 0x1
#define DPAGE_SEL_SFT 0xD
#define DPAGE_SEL_MSK 0x1
#define DISP_SEL_SFT 0xE
#define DISP_SEL_MSK 0x1
#define FIELD_CONF_EN_SFT 15
#define FIELD_CONF_EN_MSK 1
#define FIELD_SEL_SFT 16
#define FIELD_SEL_MSK 1
#define DFIX_SEL_SFT 17
#define DFIX_SEL_MSK 1
/* REG_STATUS: IPU Status Register */
#define OUT_END_SFT 0x0
#define OUT_END_MSK 0x1
#define FMT_ERR_SFT 0x1
#define FMT_ERR_MSK 0x1
#define SIZE_ERR_SFT 0x2
#define SIZE_ERR_MSK 0x1
/* D_FMT: Data Format Register */
#define IN_FMT_SFT 0x0
#define IN_FMT_MSK 0x3
#define IN_OFT_SFT 0x2
#define IN_OFT_MSK 0x3
#define YUV_PKG_OUT_SFT 0x10
#define YUV_PKG_OUT_MSK 0x7
#define OUT_FMT_SFT 0x13
#define OUT_FMT_MSK 0x3
#define RGB_OUT_OFT_SFT 0x15
#define RGB_OUT_OFT_MSK 0x7
#define RGB888_FMT_SFT 0x18
#define RGB888_FMT_MSK 0x1
/* IN_FM_GS: Input Geometric Size Register */
#define IN_FM_H_SFT 0x0
#define IN_FM_H_MSK 0xFFF
#define IN_FM_W_SFT 0x10
#define IN_FM_W_MSK 0xFFF
/* Y_STRIDE: Input Y Data Line Stride Register */
#define Y_S_SFT 0x0
#define Y_S_MSK 0x3FFF
/* UV_STRIDE: Input UV Data Line Stride Register */
#define V_S_SFT 0x0
#define V_S_MSK 0x1FFF
#define U_S_SFT 0x10
#define U_S_MSK 0x1FFF
/* OUT_GS: Output Geometric Size Register */
#define OUT_FM_H_SFT 0x0
#define OUT_FM_H_MSK 0x1FFF
#define OUT_FM_W_SFT 0x10
#define OUT_FM_W_MSK 0x7FFF
/* OUT_STRIDE: Output Data Line Stride Register */
#define OUT_S_SFT 0x0
#define OUT_S_MSK 0xFFFF
/* RSZ_COEF_INDEX: Resize Coefficients Table Index Register */
#define VE_IDX_SFT 0x0
#define VE_IDX_MSK 0x1F
#define HE_IDX_SFT 0x10
#define HE_IDX_MSK 0x1F
/* CSC_CX_COEF: CSC CX Coefficient Register */
#define CX_COEF_SFT 0x0
#define CX_COEF_MSK 0xFFF
/* HRSZ_LUT_BASE, VRSZ_LUT_BASE: Resize Coefficients Look Up Table Register group */
#define LUT_LEN 20
#define OUT_N_SFT 0x0
#define OUT_N_MSK 0x1
#define IN_N_SFT 0x1
#define IN_N_MSK 0x1
#define W_COEF_SFT 0x2
#define W_COEF_MSK 0x3FF
/* CSC_OFSET_PARA: CSC Offset Parameter Register */
#define CHROM_OF_SFT 0x10
#define CHROM_OF_MSK 0xFF
#define LUMA_OF_SFT 0x00
#define LUMA_OF_MSK 0xFF
#endif /* __JZ4760_REGS_H__ */
Copy Permalink