1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-11 10:37:31 +02:00
openwrt-xburst/target/linux/ixp4xx/patches-2.6.24/031-ixp4xx-net-drivers-nslu2.patch

89 lines
2.5 KiB
Diff
Raw Normal View History

Index: linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c
===================================================================
--- linux-2.6.23.12-armeb.orig/arch/arm/mach-ixp4xx/nslu2-setup.c 2008-01-08 15:28:13.000000000 +1030
+++ linux-2.6.23.12-armeb/arch/arm/mach-ixp4xx/nslu2-setup.c 2008-01-08 15:28:32.000000000 +1030
@@ -24,6 +24,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/time.h>
+#include <asm/io.h>
static struct flash_platform_data nslu2_flash_data = {
.map_name = "cfi_probe",
@@ -140,6 +141,23 @@
.resource = nslu2_uart_resources,
};
+/* Built-in 10/100 Ethernet MAC interfaces */
+static struct eth_plat_info nslu2_plat_eth[] = {
+ {
+ .phy = 1,
+ .rxq = 3,
+ .txreadyq = 20,
+ }
+};
+
+static struct platform_device nslu2_eth[] = {
+ {
+ .name = "ixp4xx_eth",
+ .id = IXP4XX_ETH_NPEB,
+ .dev.platform_data = nslu2_plat_eth,
+ }
+};
+
static struct platform_device *nslu2_devices[] __initdata = {
&nslu2_i2c_gpio,
&nslu2_flash,
@@ -147,6 +165,7 @@
#ifdef CONFIG_LEDS_IXP4XX
&nslu2_leds,
#endif
+ &nslu2_eth[0],
};
static void nslu2_power_off(void)
@@ -175,6 +194,9 @@
static void __init nslu2_init(void)
{
+ uint8_t __iomem *f;
+ int i;
+
ixp4xx_sys_init();
nslu2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
@@ -191,6 +213,33 @@
(void)platform_device_register(&nslu2_uart);
platform_add_devices(nslu2_devices, ARRAY_SIZE(nslu2_devices));
+
+
+ /*
+ * Map in a portion of the flash and read the MAC address.
+ * Since it is stored in BE in the flash itself, we need to
+ * byteswap it if we're in LE mode.
+ */
+ if ((f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x40000))) {
+#ifdef __ARMEB__
+ for (i = 0; i < 6; i++) {
+ nslu2_plat_eth[0].hwaddr[i] = readb(f + 0x3FFB0 + i);
+ }
+#else
+ nslu2_plat_eth[0].hwaddr[0] = readb(f + 0x3FFB0 + 3);
+ nslu2_plat_eth[0].hwaddr[1] = readb(f + 0x3FFB0 + 2);
+ nslu2_plat_eth[0].hwaddr[2] = readb(f + 0x3FFB0 + 1);
+ nslu2_plat_eth[0].hwaddr[3] = readb(f + 0x3FFB0 + 0);
+ nslu2_plat_eth[0].hwaddr[4] = readb(f + 0x3FFB0 + 7);
+ nslu2_plat_eth[0].hwaddr[5] = readb(f + 0x3FFB0 + 6);
+#endif
+ iounmap(f);
+ }
+ printk(KERN_INFO "NSLU2: Using MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x for port 0\n",
+ nslu2_plat_eth[0].hwaddr[0], nslu2_plat_eth[0].hwaddr[1],
+ nslu2_plat_eth[0].hwaddr[2], nslu2_plat_eth[0].hwaddr[3],
+ nslu2_plat_eth[0].hwaddr[4], nslu2_plat_eth[0].hwaddr[5]);
+
}
MACHINE_START(NSLU2, "Linksys NSLU2")