openwrt-xburst/target/linux/ar71xx/base-files/etc/uci-defaults/network

#!/bin/sh
#
# Copyright (C) 2011 OpenWrt.org
#

set_interface_loopback() {
	uci batch <<EOF
set network.loopback='interface'
set network.loopback.ifname='lo'
set network.loopback.proto='static'
set network.loopback.ipaddr='127.0.0.1'
set network.loopback.netmask='255.0.0.0'
EOF
}

set_interface_raw() {
	local cfg=$1
	local ifname=$2

	uci batch <<EOF
set network.$cfg='interface'
set network.$cfg.ifname='$ifname'
set network.$cfg.proto='none'
EOF
}

set_interface_lan() {
	local ifname=$1

	uci batch <<EOF
set network.lan='interface'
set network.lan.ifname='$ifname'
set network.lan.type='bridge'
set network.lan.proto='static'
set network.lan.ipaddr='192.168.1.1'
set network.lan.netmask='255.255.255.0'
EOF
}

set_interface_wan() {
	local ifname=$1

	uci batch <<EOF
set network.wan='interface'
set network.wan.ifname='$ifname'
set network.wan.proto='dhcp'
EOF
}

set_interfaces_lan_wan() {
	local lan_ifname=$1
	local wan_ifname=$2

	set_interface_lan "$lan_ifname"
	set_interface_wan "$wan_ifname"
}

add_switch() {
	local name=$1
	local reset=$2
	local enable=$3
	uci batch <<EOF
add network switch
set network.@switch[-1].name='$name'
set network.@switch[-1].reset='$reset'
set network.@switch[-1].enable_vlan='$enable'
EOF
}

add_switch_vlan() {
	local device=$1
	local vlan=$2
	local ports=$3
	uci batch <<EOF
add network switch_vlan
set network.@switch_vlan[-1].device='$device'
set network.@switch_vlan[-1].vlan='$vlan'
set network.@switch_vlan[-1].ports='$ports'
EOF
}

[ -e /etc/config/network ] && exit 0

touch /etc/config/network

set_interface_loopback

. /lib/ar71xx.sh

board=$(ar71xx_board_name)

case "$board" in
dir-825-b1)
	set_interfaces_lan_wan "eth0.1" "eth1"
	add_switch "rtl8366s" "1" "1"
	add_switch_vlan "rtl8366s" "1" "0 1 2 3 5t"
	;;

nbg460n_550n_550nh)
	set_interfaces_lan_wan "eth0" "eth1"
	add_switch "rtl8366s" "1" "1"
	add_switch_vlan "rtl8366s" "0" "0 1 2 3 5"
	;;

rb-433 |\
rb-433u)
	set_interfaces_lan_wan "eth1" "eth0"
	add_switch "switch0" "1" "1"
	add_switch_vlan "switch0" "1" "1 2 5"
	;;

rb-450)
	set_interfaces_lan_wan "eth1" "eth0"
	add_switch "eth1" "1" "1"
	add_switch_vlan "eth1" "1" "0 1 2 3 5"
	;;

rb-450g |\
routerstation-pro)
	set_interfaces_lan_wan "eth1" "eth0"
	add_switch "switch0" "1" "1"
	add_switch_vlan "switch0" "1" "0 1 2 3 4"
	;;

rb-493g)
	set_interfaces_lan_wan "eth0 eth1.1" "eth1.2"
	add_switch "switch0" "1" "1"
	add_switch_vlan "switch0" "1" "0 1 2 3 4"
	add_switch "switch1" "1" "1"
	add_switch_vlan "switch1" "1" "0t 1 2 3 4"
	add_switch_vlan "switch1" "2" "0t 5"
	;;

pb92)
	set_interfaces_lan_wan "eth0.1" "eth0.2"
	add_switch "eth0" "1" "1"
	add_switch_vlan "eth0" "1" "0t 1 3 4 5"
	add_switch_vlan "eth0" "2" "0t 2"
	;;

tl-wr1043nd)
	set_interfaces_lan_wan "eth0.1" "eth0.2"
	add_switch "rtl8366rb" "1" "1"
	add_switch_vlan "rtl8366rb" "1" "1 2 3 4 5t"
	add_switch_vlan "rtl8366rb" "2" "0 5t"
	;;

tl-wr841n-v1|\
tl-wr941nd)
	set_interface_raw "eth" "eth0"
	set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
	;;

wrt160nl)
	set_interfaces_lan_wan "eth0" "eth1"
	add_switch "eth0" "1" "1"
	add_switch_vlan "eth0" "1" "0 1 2 3 4 5"
	;;

wzr-hp-g300nh)
	set_interfaces_lan_wan "eth0.1" "eth1"
	add_switch "switch0" "1" "1"
	add_switch_vlan "switch0" "1" "0 1 2 3 5t"
	;;

aw-nr580 |\
bullet-m |\
eap7660d |\
rb-411 |\
tl-wa901nd-v2 |\
tl-wr703n |\
wp543)
	set_interface_lan "eth0"
	;;

ap83 |\
jwap003 |\
pb42 |\
pb44 |\
routerstation)
	set_interfaces_lan_wan "eth1" "eth0"
	;;

ap121 |\
ap121-mini |\
ap96 |\
dir-600-a1 |\
dir-615-c1 |\
ja76pf |\
rb750 |\
tew-632brp |\
tl-mr3220 |\
tl-mr3420 |\
tl-wr741nd |\
tl-wr741nd-v4 |\
whr-g301n |\
whr-hp-g300n |\
whr-hp-gn |\
wzr-hp-ag300h)
	set_interfaces_lan_wan "eth0" "eth1"
	add_switch "eth0" "1" "1"
	add_switch_vlan "eth0" "1" "0 1 2 3 4"
	;;

*)
	set_interfaces_lan_wan "eth0" "eth1"
	;;
esac

uci commit network

exit 0