openwrt-xburst/package/mac80211/patches/000-kconfig.patch

--- /dev/null
+++ b/net/mac80211/Kconfig
@@ -0,0 +1,198 @@
+config MAC80211
+	tristate "Generic IEEE 802.11 Networking Stack (mac80211)"
+	select CRYPTO
+	select CRYPTO_ECB
+	select CRYPTO_ARC4
+	select CRYPTO_AES
+	select CRC32
+	select WIRELESS_EXT
+	select CFG80211
+	---help---
+	  This option enables the hardware independent IEEE 802.11
+	  networking stack.
+
+menu "Rate control algorithm selection"
+	depends on MAC80211 != n
+
+config MAC80211_RC_PID
+	bool "PID controller based rate control algorithm" if EMBEDDED
+	default y
+	---help---
+	  This option enables a TX rate control algorithm for
+	  mac80211 that uses a PID controller to select the TX
+	  rate.
+
+choice
+	prompt "Default rate control algorithm"
+	default MAC80211_RC_DEFAULT_PID
+	---help---
+	  This option selects the default rate control algorithm
+	  mac80211 will use. Note that this default can still be
+	  overriden through the ieee80211_default_rc_algo module
+	  parameter if different algorithms are available.
+
+config MAC80211_RC_DEFAULT_PID
+	bool "PID controller based rate control algorithm"
+	depends on MAC80211_RC_PID
+	---help---
+	  Select the PID controller based rate control as the
+	  default rate control algorithm. You should choose
+	  this unless you know what you are doing.
+
+endchoice
+
+config MAC80211_RC_DEFAULT
+	string
+	default "pid" if MAC80211_RC_DEFAULT_PID
+	default ""
+
+endmenu
+
+config MAC80211_MESH
+	bool "Enable mac80211 mesh networking (pre-802.11s) support"
+	depends on MAC80211 && EXPERIMENTAL
+	---help---
+	 This options enables support of Draft 802.11s mesh networking.
+	 The implementation is based on Draft 1.08 of the Mesh Networking
+	 amendment. For more information visit http://o11s.org/.
+
+
+config MAC80211_LEDS
+	bool "Enable LED triggers"
+	depends on MAC80211
+	select NEW_LEDS
+	select LEDS_TRIGGERS
+	---help---
+	  This option enables a few LED triggers for different
+	  packet receive/transmit events.
+
+config MAC80211_DEBUGFS
+	bool "Export mac80211 internals in DebugFS"
+	depends on MAC80211 && DEBUG_FS
+	---help---
+	  Select this to see extensive information about
+	  the internal state of mac80211 in debugfs.
+
+	  Say N unless you know you need this.
+
+menuconfig MAC80211_DEBUG_MENU
+	bool "Select mac80211 debugging features"
+	depends on MAC80211
+	---help---
+	  This option collects various mac80211 debug settings.
+
+config MAC80211_DEBUG_PACKET_ALIGNMENT
+	bool "Enable packet alignment debugging"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  This option is recommended for driver authors and strongly
+	  discouraged for everybody else, it will trigger a warning
+	  when a driver hands mac80211 a buffer that is aligned in
+	  a way that will cause problems with the IP stack on some
+	  architectures.
+
+	  Say N unless you're writing a mac80211 based driver.
+
+config MAC80211_NOINLINE
+	bool "Do not inline TX/RX handlers"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  This option affects code generation in mac80211, when
+	  selected some functions are marked "noinline" to allow
+	  easier debugging of problems in the transmit and receive
+	  paths.
+
+	  This option increases code size a bit and inserts a lot
+	  of function calls in the code, but is otherwise safe to
+	  enable.
+
+	  If unsure, say N unless you expect to be finding problems
+	  in mac80211.
+
+config MAC80211_VERBOSE_DEBUG
+	bool "Verbose debugging output"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  Selecting this option causes mac80211 to print out
+	  many debugging messages. It should not be selected
+	  on production systems as some of the messages are
+	  remotely triggerable.
+
+	  Do not select this option.
+
+config MAC80211_HT_DEBUG
+	bool "Verbose HT debugging"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  This option enables 802.11n High Throughput features
+	  debug tracing output.
+
+	  It should not be selected on production systems as some
+	  of the messages are remotely triggerable.
+
+	  Do not select this option.
+
+config MAC80211_TKIP_DEBUG
+	bool "Verbose TKIP debugging"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  Selecting this option causes mac80211 to print out
+	  very verbose TKIP debugging messages. It should not
+	  be selected on production systems as those messages
+	  are remotely triggerable.
+
+	  Do not select this option.
+
+config MAC80211_IBSS_DEBUG
+	bool "Verbose IBSS debugging"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  Selecting this option causes mac80211 to print out
+	  very verbose IBSS debugging messages. It should not
+	  be selected on production systems as those messages
+	  are remotely triggerable.
+
+	  Do not select this option.
+
+config MAC80211_VERBOSE_PS_DEBUG
+	bool "Verbose powersave mode debugging"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  Selecting this option causes mac80211 to print out very
+	  verbose power save mode debugging messages (when mac80211
+	  is an AP and has power saving stations.)
+	  It should not be selected on production systems as those
+	  messages are remotely triggerable.
+
+	  Do not select this option.
+
+config MAC80211_VERBOSE_MPL_DEBUG
+	bool "Verbose mesh peer link debugging"
+	depends on MAC80211_DEBUG_MENU
+	depends on MAC80211_MESH
+	---help---
+	  Selecting this option causes mac80211 to print out very
+	  verbose mesh peer link debugging messages (when mac80211
+	  is taking part in a mesh network).
+	  It should not be selected on production systems as those
+	  messages are remotely triggerable.
+
+	  Do not select this option.
+
+config MAC80211_DEBUG_COUNTERS
+	bool "Extra statistics for TX/RX debugging"
+	depends on MAC80211_DEBUG_MENU
+	depends on MAC80211_DEBUGFS
+	---help---
+	  Selecting this option causes mac80211 to keep additional
+	  and very verbose statistics about TX and RX handler use
+	  and show them in debugfs.
+
+	  If unsure, say N.
+
+config MAC80211_VERBOSE_SPECT_MGMT_DEBUG
+	bool "Verbose Spectrum Management (IEEE 802.11h)debugging"
+	depends on MAC80211_DEBUG_MENU
+	---help---
+	  Say Y here to print out verbose Spectrum Management (IEEE 802.11h)
+	  debug messages.