openwrt-xburst/package/madwifi/patches/407-new_athinfo.patch

--- a/tools/ath_info.c
+++ b/tools/ath_info.c
@@ -16,78 +16,8 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
-/* So here is how it works:
- *
- * First compile...
- *
- * gcc ath_info.c -o ath_info
- *
- * then find card's physical address
- *
- * lspci -v
- *
- * 02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01)
- *         Subsystem: Fujitsu Limited. Unknown device 1234
- *         Flags: bus master, medium devsel, latency 168, IRQ 23
- *         Memory at c2000000 (32-bit, non-prefetchable) [size=64K]
- *         Capabilities: [44] Power Management version 2
- *
- * address here is 0xc2000000
- *
- * load madwifi-ng or madwifi-old if not already loaded (be sure the
- * interface is down!)
- *
- * modprobe ath_pci
- *
- * OR
- *
- * call:
- * setpci -s 02:02.0 command=0x41f cache_line_size=0x10
- *
- * to enable access to the PCI device.
- *
- * and we run the thing...
- *
- * ./ath_info 0xc2000000
- *
- * In order to change the regdomain to 0, call:
- *
- * ./ath_info -w 0xc2000000 regdomain 0
- *
- * to change any PCI ID value, say:
- *
- * ./ath_info -w 0xc2000000 <name> X
- *
- * with <name> ::= pci_dev_id | pci_vendor_id | pci_class |
- *                 pci_subsys_dev_id | pci_subsys_vendor_id
- *
- * With newer chipsets (>= AR5004x, i.e. MAC >= AR5213), Atheros introduced
- * write protection on the EEPROM. On a GIGABYTE GN-WI01HT you can set GPIO 4
- * to low to be able to write the EEPROM. This depends highly on the PCB layout,
- * so there may be different GPIO used.
- * This program currently sets GPIO 4 to low for a MAC >= AR5213, but you can
- * override this with the -g option:
- *
- * ./ath_info -g 5:0 -w 0xc2000000 regdomain X
- *
- * would set GPIO 5 to low (and wouldn't touch GPIO 4). -g can be given several times.
- *
- * The write function is currently not tested with 5210 devices.
- *
- * Use at your own risk, entering a false device address will have really
- * nasty results!
- *
- * Writing wrong values to the PCI id fields may prevent the driver from
- * detecting the card!
- *
- * Transmitting on illegal frequencies may violate state laws. Stick to the local
- * regulations!
- *
- * DISCLAIMER:
- * The authors are in no case responsible for damaged hardware or violation of
- * local laws by operating modified hardware.
- *
- */
+/* Try accepting 64-bit device address even with 32-bit userspace */
+#define _FILE_OFFSET_BITS 64
 
 #include <stdio.h>
 #include <stdlib.h>
@@ -130,109 +60,103 @@ fprintf(stderr, "#ERR %s: " fmt "\n", __
  */
 #define AR5K_GPIODI	0x401c
 
-/*
- * Common silicon revision/version values
- */
-enum ath5k_srev_type {
-	AR5K_VERSION_VER,
-	AR5K_VERSION_REV,
-	AR5K_VERSION_RAD,
-};
-
 struct ath5k_srev_name {
 	const char *sr_name;
-	enum ath5k_srev_type sr_type;
-	u_int sr_val;
+	u_int8_t sr_val;
 };
 
-#define AR5K_SREV_UNKNOWN	0xffff
-
 /* Known MAC revision numbers */
-#define AR5K_SREV_VER_AR5210	0x00
-#define AR5K_SREV_VER_AR5311	0x10
-#define AR5K_SREV_VER_AR5311A	0x20
-#define AR5K_SREV_VER_AR5311B	0x30
-#define AR5K_SREV_VER_AR5211	0x40
-#define AR5K_SREV_VER_AR5212	0x50
-#define AR5K_SREV_VER_AR5213	0x55
-#define AR5K_SREV_VER_AR5213A	0x59
-#define	AR5K_SREV_VER_AR2424	0xa0
-#define	AR5K_SREV_VER_AR5424	0xa3
-#define	AR5K_SREV_VER_AR5413	0xa4
-#define AR5K_SREV_VER_AR5414	0xa5
-#define	AR5K_SREV_VER_AR5416	0xc0
-#define	AR5K_SREV_VER_AR5418	0xca
-#define	AR5K_SREV_VER_AR2425	0xe0
-
-/* Known PHY revision nymbers */
-#define AR5K_SREV_RAD_5110	0x00
-#define AR5K_SREV_RAD_5111	0x10
-#define AR5K_SREV_RAD_5111A	0x15
-#define AR5K_SREV_RAD_2111	0x20
-#define AR5K_SREV_RAD_5112	0x30
-#define AR5K_SREV_RAD_5112A	0x35
-#define AR5K_SREV_RAD_2112	0x40
-#define AR5K_SREV_RAD_2112A	0x45
-#define AR5K_SREV_RAD_SC1	0x63	/* Found on 5413/5414 */
-#define	AR5K_SREV_RAD_SC2	0xa2	/* Found on 2424/5424 */
-#define	AR5K_SREV_RAD_5133	0xc0	/* MIMO found on 5418 */
-
-static const struct ath5k_srev_name ath5k_srev_names[] = {
-	{"5210", AR5K_VERSION_VER, AR5K_SREV_VER_AR5210},
-	{"5311", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311},
-	{"5311A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311A},
-	{"5311B", AR5K_VERSION_VER, AR5K_SREV_VER_AR5311B},
-	{"5211", AR5K_VERSION_VER, AR5K_SREV_VER_AR5211},
-	{"5212", AR5K_VERSION_VER, AR5K_SREV_VER_AR5212},
-	{"5213", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213},
-	{"5213A", AR5K_VERSION_VER, AR5K_SREV_VER_AR5213A},
-	{"2424", AR5K_VERSION_VER, AR5K_SREV_VER_AR2424},
-	{"5424", AR5K_VERSION_VER, AR5K_SREV_VER_AR5424},
-	{"5413", AR5K_VERSION_VER, AR5K_SREV_VER_AR5413},
-	{"5414", AR5K_VERSION_VER, AR5K_SREV_VER_AR5414},
-	{"5416", AR5K_VERSION_VER, AR5K_SREV_VER_AR5416},
-	{"5418", AR5K_VERSION_VER, AR5K_SREV_VER_AR5418},
-	{"2425", AR5K_VERSION_VER, AR5K_SREV_VER_AR2425},
-	{"xxxxx", AR5K_VERSION_VER, AR5K_SREV_UNKNOWN},
-	{"5110", AR5K_VERSION_RAD, AR5K_SREV_RAD_5110},
-	{"5111", AR5K_VERSION_RAD, AR5K_SREV_RAD_5111},
-	{"2111", AR5K_VERSION_RAD, AR5K_SREV_RAD_2111},
-	{"5112", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112},
-	{"5112a", AR5K_VERSION_RAD, AR5K_SREV_RAD_5112A},
-	{"2112", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112},
-	{"2112a", AR5K_VERSION_RAD, AR5K_SREV_RAD_2112A},
-	{"SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC1},
-	{"SChip", AR5K_VERSION_RAD, AR5K_SREV_RAD_SC2},
-	{"5133", AR5K_VERSION_RAD, AR5K_SREV_RAD_5133},
-	{"xxxxx", AR5K_VERSION_RAD, AR5K_SREV_UNKNOWN},
+#define AR5K_SREV_MAC_AR5210	0x00
+#define AR5K_SREV_MAC_AR5311	0x10
+#define AR5K_SREV_MAC_AR5311A	0x20
+#define AR5K_SREV_MAC_AR5311B	0x30
+#define AR5K_SREV_MAC_AR5211	0x40
+#define AR5K_SREV_MAC_AR5212	0x50
+#define AR5K_SREV_MAC_AR5213	0x55
+#define AR5K_SREV_MAC_AR5213A	0x59
+#define AR5K_SREV_MAC_AR5513	0x61
+#define AR5K_SREV_MAC_AR2413	0x78
+#define AR5K_SREV_MAC_AR2414	0x79
+#define AR5K_SREV_MAC_AR2424	0xa0
+#define AR5K_SREV_MAC_AR5424	0xa3
+#define AR5K_SREV_MAC_AR5413	0xa4
+#define AR5K_SREV_MAC_AR5414	0xa5
+#define AR5K_SREV_MAC_AR5416	0xc0
+#define AR5K_SREV_MAC_AR5418	0xca
+#define AR5K_SREV_MAC_AR2425	0xe2
+
+/* Known PHY revision numbers */
+#define AR5K_SREV_PHY_5110	0x00
+#define AR5K_SREV_PHY_5111	0x10
+#define AR5K_SREV_PHY_5111A	0x15
+#define AR5K_SREV_PHY_2111	0x20
+#define AR5K_SREV_PHY_5112	0x30
+#define AR5K_SREV_PHY_5112A	0x35
+#define AR5K_SREV_PHY_2112	0x40
+#define AR5K_SREV_PHY_2112A	0x45
+#define AR5K_SREV_PHY_SC0	0x56	/* Found on 2413/2414 */
+#define AR5K_SREV_PHY_SC1	0x63	/* Found on 5413/5414 */
+#define AR5K_SREV_PHY_SC2	0xa2	/* Found on 2424/5424 */
+#define AR5K_SREV_PHY_5133	0xc0	/* MIMO found on 5418 */
+
+static const struct ath5k_srev_name ath5k_mac_names[] = {
+	{"5210", AR5K_SREV_MAC_AR5210},
+	{"5311", AR5K_SREV_MAC_AR5311},
+	{"5311A", AR5K_SREV_MAC_AR5311A},
+	{"5311B", AR5K_SREV_MAC_AR5311B},
+	{"5211", AR5K_SREV_MAC_AR5211},
+	{"5212", AR5K_SREV_MAC_AR5212},
+	{"5213", AR5K_SREV_MAC_AR5213},
+	{"5213A", AR5K_SREV_MAC_AR5213A},
+	{"2413", AR5K_SREV_MAC_AR2413},
+	{"2414", AR5K_SREV_MAC_AR2414},
+	{"2424", AR5K_SREV_MAC_AR2424},
+	{"5424", AR5K_SREV_MAC_AR5424},
+	{"5413", AR5K_SREV_MAC_AR5413},
+	{"5414", AR5K_SREV_MAC_AR5414},
+	{"5416", AR5K_SREV_MAC_AR5416},
+	{"5418", AR5K_SREV_MAC_AR5418},
+	{"2425", AR5K_SREV_MAC_AR2425},
+};
+
+static const struct ath5k_srev_name ath5k_phy_names[] = {
+	{"5110", AR5K_SREV_PHY_5110},
+	{"5111", AR5K_SREV_PHY_5111},
+	{"2111", AR5K_SREV_PHY_2111},
+	{"5112", AR5K_SREV_PHY_5112},
+	{"5112A", AR5K_SREV_PHY_5112A},
+	{"2112", AR5K_SREV_PHY_2112},
+	{"2112A", AR5K_SREV_PHY_2112A},
+	{"SChip", AR5K_SREV_PHY_SC0},
+	{"SChip", AR5K_SREV_PHY_SC1},
+	{"SChip", AR5K_SREV_PHY_SC2},
+	{"5133", AR5K_SREV_PHY_5133},
 };
 
 /*
  * Silicon revision register
  */
 #define AR5K_SREV		0x4020	/* Register Address */
-#define AR5K_SREV_REV		0x0000000f	/* Mask for revision */
-#define AR5K_SREV_REV_S		0
-#define AR5K_SREV_VER		0x000000ff	/* Mask for version */
-#define AR5K_SREV_VER_S		4
+#define AR5K_SREV_VER		0x000000f0	/* Mask for version */
+#define AR5K_SREV_REV		0x000000ff	/* Mask for revision */
 
 /*
  * PHY chip revision register
  */
-#define	AR5K_PHY_CHIP_ID		0x9818
+#define AR5K_PHY_CHIP_ID		0x9818
 
 /*
  * PHY register
  */
-#define	AR5K_PHY_BASE			0x9800
-#define	AR5K_PHY(_n)			(AR5K_PHY_BASE + ((_n) << 2))
+#define AR5K_PHY_BASE			0x9800
+#define AR5K_PHY(_n)			(AR5K_PHY_BASE + ((_n) << 2))
 #define AR5K_PHY_SHIFT_2GHZ		0x00004007
 #define AR5K_PHY_SHIFT_5GHZ		0x00000007
 
 #define AR5K_RESET_CTL		0x4000	/* Register Address */
 #define AR5K_RESET_CTL_PCU	0x00000001	/* Protocol Control Unit reset */
 #define AR5K_RESET_CTL_DMA	0x00000002	/* DMA (Rx/Tx) reset -5210 only */
-#define	AR5K_RESET_CTL_BASEBAND	0x00000002	/* Baseband reset (5211/5212) */
+#define AR5K_RESET_CTL_BASEBAND	0x00000002	/* Baseband reset (5211/5212) */
 #define AR5K_RESET_CTL_MAC	0x00000004	/* MAC reset (PCU+Baseband?) -5210 only */
 #define AR5K_RESET_CTL_PHY	0x00000008	/* PHY reset -5210 only */
 #define AR5K_RESET_CTL_PCI	0x00000010	/* PCI Core reset (interrupts etc) */
@@ -253,7 +177,7 @@ static const struct ath5k_srev_name ath5
 #define AR5K_SLEEP_CTL_SLE_UNITS	0x00000008	/* not on 5210 */
 
 #define AR5K_PCICFG			0x4010	/* Register Address */
-#define AR5K_PCICFG_EEAE		0x00000001	/* Eeprom access enable [5210] */
+#define AR5K_PCICFG_EEAE		0x00000001	/* EEPROM access enable [5210] */
 #define AR5K_PCICFG_CLKRUNEN		0x00000004	/* CLKRUN enable [5211+] */
 #define AR5K_PCICFG_EESIZE		0x00000018	/* Mask for EEPROM size [5211+] */
 #define AR5K_PCICFG_EESIZE_S		3
@@ -264,26 +188,118 @@ static const struct ath5k_srev_name ath5
 
 #define AR5K_PCICFG_SPWR_DN		0x00010000	/* Mask for power status (5210) */
 
-#define AR5K_EEPROM_BASE		0x6000
+#define AR5K_EEPROM_BASE	0x6000
 
-#define AR5K_EEPROM_MAGIC		0x003d	/* Offset for EEPROM Magic number */
+/*
+ * Common AR5xxx EEPROM data offsets (set these on AR5K_EEPROM_BASE)
+ */
+#define AR5K_EEPROM_MAGIC		0x003d	/* EEPROM Magic number */
 #define AR5K_EEPROM_MAGIC_VALUE		0x5aa5	/* Default - found on EEPROM */
 #define AR5K_EEPROM_MAGIC_5212		0x0000145c	/* 5212 */
 #define AR5K_EEPROM_MAGIC_5211		0x0000145b	/* 5211 */
 #define AR5K_EEPROM_MAGIC_5210		0x0000145a	/* 5210 */
 
+#define AR5K_EEPROM_PROTECT		0x003f	/* EEPROM protect status */
+#define AR5K_EEPROM_PROTECT_RD_0_31	0x0001	/* Read protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_WR_0_31	0x0002	/* Write protection bit for offsets 0x0 - 0x1f */
+#define AR5K_EEPROM_PROTECT_RD_32_63	0x0004	/* 0x20 - 0x3f */
+#define AR5K_EEPROM_PROTECT_WR_32_63	0x0008
+#define AR5K_EEPROM_PROTECT_RD_64_127	0x0010	/* 0x40 - 0x7f */
+#define AR5K_EEPROM_PROTECT_WR_64_127	0x0020
+#define AR5K_EEPROM_PROTECT_RD_128_191	0x0040	/* 0x80 - 0xbf (regdom) */
+#define AR5K_EEPROM_PROTECT_WR_128_191	0x0080
+#define AR5K_EEPROM_PROTECT_RD_192_207	0x0100	/* 0xc0 - 0xcf */
+#define AR5K_EEPROM_PROTECT_WR_192_207	0x0200
+#define AR5K_EEPROM_PROTECT_RD_208_223	0x0400	/* 0xd0 - 0xdf */
+#define AR5K_EEPROM_PROTECT_WR_208_223	0x0800
+#define AR5K_EEPROM_PROTECT_RD_224_239	0x1000	/* 0xe0 - 0xef */
+#define AR5K_EEPROM_PROTECT_WR_224_239	0x2000
+#define AR5K_EEPROM_PROTECT_RD_240_255	0x4000	/* 0xf0 - 0xff */
+#define AR5K_EEPROM_PROTECT_WR_240_255	0x8000
+#define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* EEPROM regdom */
+#define AR5K_EEPROM_INFO_BASE		0x00c0	/* EEPROM header */
+#define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)
+#define AR5K_EEPROM_INFO_CKSUM		0xffff
+#define AR5K_EEPROM_INFO(_n)		(AR5K_EEPROM_INFO_BASE + (_n))
+
+#define AR5K_EEPROM_VERSION		AR5K_EEPROM_INFO(1)	/* EEPROM Version */
+#define AR5K_EEPROM_VERSION_3_0		0x3000	/* No idea what's going on before this version */
+#define AR5K_EEPROM_VERSION_3_1		0x3001	/* ob/db values for 2GHz (AR5211_rfregs) */
+#define AR5K_EEPROM_VERSION_3_2		0x3002	/* different frequency representation (eeprom_bin2freq) */
+#define AR5K_EEPROM_VERSION_3_3		0x3003	/* offsets changed, has 32 CTLs (see below) and ee_false_detect (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_3_4		0x3004	/* has ee_i_gain ee_cck_ofdm_power_delta (eeprom_read_modes) */
+#define AR5K_EEPROM_VERSION_4_0		0x4000	/* has ee_misc*, ee_cal_pier, ee_turbo_max_power and ee_xr_power (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_1		0x4001	/* has ee_margin_tx_rx (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_2		0x4002	/* has ee_cck_ofdm_gain_delta (eeprom_init) */
+#define AR5K_EEPROM_VERSION_4_3		0x4003
+#define AR5K_EEPROM_VERSION_4_4		0x4004
+#define AR5K_EEPROM_VERSION_4_5		0x4005
+#define AR5K_EEPROM_VERSION_4_6		0x4006	/* has ee_scaled_cck_delta */
+#define AR5K_EEPROM_VERSION_4_7		0x3007
+
+#define AR5K_EEPROM_MODE_11A		0
+#define AR5K_EEPROM_MODE_11B		1
+#define AR5K_EEPROM_MODE_11G		2
+
+#define AR5K_EEPROM_HDR			AR5K_EEPROM_INFO(2)	/* Header that contains the device caps */
+#define AR5K_EEPROM_HDR_11A(_v)		(((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)
+#define AR5K_EEPROM_HDR_11B(_v)		(((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)
+#define AR5K_EEPROM_HDR_11G(_v)		(((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)
+#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v)	(((_v) >> 3) & 0x1)	/* Disable turbo for 2GHz (?) */
+#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v)	(((_v) >> 4) & 0x7f)	/* Max turbo power for a/XR mode (eeprom_init) */
+#define AR5K_EEPROM_HDR_DEVICE(_v)	(((_v) >> 11) & 0x7)
+#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)	(((_v) >> 15) & 0x1)	/* Disable turbo for 5GHz (?) */
+#define AR5K_EEPROM_HDR_RFKILL(_v)	(((_v) >> 14) & 0x1)	/* Device has RFKill support */
+
+/* Misc values available since EEPROM 4.0 */
+#define AR5K_EEPROM_MISC0		AR5K_EEPROM_INFO(4)
+#define AR5K_EEPROM_EARSTART(_v)	((_v) & 0xfff)
+#define AR5K_EEPROM_HDR_XR2_DIS(_v)	(((_v) >> 12) & 0x1)
+#define AR5K_EEPROM_HDR_XR5_DIS(_v)	(((_v) >> 13) & 0x1)
+#define AR5K_EEPROM_EEMAP(_v)		(((_v) >> 14) & 0x3)
+#define AR5K_EEPROM_MISC1		AR5K_EEPROM_INFO(5)
+#define AR5K_EEPROM_TARGET_PWRSTART(_v)	((_v) & 0xfff)
+#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v)	(((_v) >> 14) & 0x1)
+
+#define AR5K_EEPROM_RFKILL_GPIO_SEL	0x0000001c
+#define AR5K_EEPROM_RFKILL_GPIO_SEL_S	2
+#define AR5K_EEPROM_RFKILL_POLARITY	0x00000002
+#define AR5K_EEPROM_RFKILL_POLARITY_S	1
+
+/* Newer EEPROMs are using a different offset */
+#define AR5K_EEPROM_OFF(_v, _v3_0, _v3_3) \
+	(((_v) >= AR5K_EEPROM_VERSION_3_3) ? _v3_3 : _v3_0)
+
+#define AR5K_EEPROM_ANT_GAIN(_v)	AR5K_EEPROM_OFF(_v, 0x00c4, 0x00c3)
+#define AR5K_EEPROM_ANT_GAIN_5GHZ(_v)	((int8_t)(((_v) >> 8) & 0xff))
+#define AR5K_EEPROM_ANT_GAIN_2GHZ(_v)	((int8_t)((_v) & 0xff))
+
+/* calibration settings */
+#define AR5K_EEPROM_MODES_11A(_v)	AR5K_EEPROM_OFF(_v, 0x00c5, 0x00d4)
+#define AR5K_EEPROM_MODES_11B(_v)	AR5K_EEPROM_OFF(_v, 0x00d0, 0x00f2)
+#define AR5K_EEPROM_MODES_11G(_v)	AR5K_EEPROM_OFF(_v, 0x00da, 0x010d)
+#define AR5K_EEPROM_CTL(_v)		AR5K_EEPROM_OFF(_v, 0x00e4, 0x0128)	/* Conformance test limits */
+#define AR5K_EEPROM_CHANNELS_5GHZ(_v)	AR5K_EEPROM_OFF(_v, 0x0100, 0x0150)	/* List of calibrated 5GHz chans */
+#define	AR5K_EEPROM_TARGET_PWR_OFF_11A(_v)	AR5K_EEPROM_OFF(_v, AR5K_EEPROM_CHANNELS_5GHZ(_v) + 0x0055, 0x0000)
+#define	AR5K_EEPROM_TARGET_PWR_OFF_11B(_v)	AR5K_EEPROM_OFF(_v, AR5K_EEPROM_CHANNELS_5GHZ(_v) + 0x0065, 0x0010)
+#define	AR5K_EEPROM_TARGET_PWR_OFF_11G(_v)	AR5K_EEPROM_OFF(_v, AR5K_EEPROM_CHANNELS_5GHZ(_v) + 0x0069, 0x0014)
+
+/* [3.1 - 3.3] */
+#define AR5K_EEPROM_OBDB0_2GHZ		0x00ec
+#define AR5K_EEPROM_OBDB1_2GHZ		0x00ed
+
 /*
  * EEPROM data register
  */
 #define AR5K_EEPROM_DATA_5211	0x6004
 #define AR5K_EEPROM_DATA_5210	0x6800
-#define	AR5K_EEPROM_DATA	(mac_version == AR5K_SREV_VER_AR5210 ? \
+#define AR5K_EEPROM_DATA	(mac_version == AR5K_SREV_MAC_AR5210 ? \
 				AR5K_EEPROM_DATA_5210 : AR5K_EEPROM_DATA_5211)
 
 /*
  * EEPROM command register
  */
-#define AR5K_EEPROM_CMD		0x6008	/* Register Addres */
+#define AR5K_EEPROM_CMD		0x6008			/* Register Address */
 #define AR5K_EEPROM_CMD_READ	0x00000001	/* EEPROM read */
 #define AR5K_EEPROM_CMD_WRITE	0x00000002	/* EEPROM write */
 #define AR5K_EEPROM_CMD_RESET	0x00000004	/* EEPROM reset */
@@ -291,43 +307,163 @@ static const struct ath5k_srev_name ath5
 /*
  * EEPROM status register
  */
-#define AR5K_EEPROM_STAT_5210	0x6c00	/* Register Address [5210] */
-#define AR5K_EEPROM_STAT_5211	0x600c	/* Register Address [5211+] */
-#define	AR5K_EEPROM_STATUS	(mac_version == AR5K_SREV_VER_AR5210 ? \
+#define AR5K_EEPROM_STAT_5210	0x6c00			/* Register Address [5210] */
+#define AR5K_EEPROM_STAT_5211	0x600c			/* Register Address [5211+] */
+#define AR5K_EEPROM_STATUS	(mac_version == AR5K_SREV_MAC_AR5210 ? \
 				AR5K_EEPROM_STAT_5210 : AR5K_EEPROM_STAT_5211)
 #define AR5K_EEPROM_STAT_RDERR	0x00000001	/* EEPROM read failed */
 #define AR5K_EEPROM_STAT_RDDONE	0x00000002	/* EEPROM read successful */
 #define AR5K_EEPROM_STAT_WRERR	0x00000004	/* EEPROM write failed */
 #define AR5K_EEPROM_STAT_WRDONE	0x00000008	/* EEPROM write successful */
 
-#define AR5K_EEPROM_REG_DOMAIN		0x00bf	/* Offset for EEPROM regulatory domain */
-#define AR5K_EEPROM_INFO_BASE		0x00c0	/* Offset for EEPROM header */
-#define AR5K_EEPROM_INFO_MAX		(0x400 - AR5K_EEPROM_INFO_BASE)
-#define AR5K_EEPROM_INFO_CKSUM		0xffff
-#define AR5K_EEPROM_INFO(_n)		(AR5K_EEPROM_INFO_BASE + (_n))
-#define AR5K_EEPROM_MODE_11A		0
-#define AR5K_EEPROM_MODE_11B		1
-#define AR5K_EEPROM_MODE_11G		2
+/*
+ * EEPROM config register (?)
+ */
+#define AR5K_EEPROM_CFG	0x6010
 
-#define AR5K_EEPROM_VERSION		AR5K_EEPROM_INFO(1)
+/* Some EEPROM defines */
+#define AR5K_EEPROM_EEP_SCALE		100
+#define AR5K_EEPROM_EEP_DELTA		10
+#define AR5K_EEPROM_N_MODES		3
+#define AR5K_EEPROM_N_5GHZ_CHAN		10
+#define AR5K_EEPROM_N_2GHZ_CHAN		3
+#define AR5K_EEPROM_MAX_CHAN		10
+#define AR5K_EEPROM_N_PCDAC		11
+#define AR5K_EEPROM_N_TEST_FREQ		8
+#define AR5K_EEPROM_N_EDGES		8
+#define AR5K_EEPROM_N_INTERCEPTS	11
+#define AR5K_EEPROM_FREQ_M(_v)		AR5K_EEPROM_OFF(_v, 0x7f, 0xff)
+#define AR5K_EEPROM_PCDAC_M		0x3f
+#define AR5K_EEPROM_PCDAC_START		1
+#define AR5K_EEPROM_PCDAC_STOP		63
+#define AR5K_EEPROM_PCDAC_STEP		1
+#define AR5K_EEPROM_NON_EDGE_M		0x40
+#define AR5K_EEPROM_CHANNEL_POWER	8
+#define AR5K_EEPROM_N_OBDB		4
+#define AR5K_EEPROM_OBDB_DIS		0xffff
+#define AR5K_EEPROM_CHANNEL_DIS		0xff
+#define AR5K_EEPROM_SCALE_OC_DELTA(_x)	(((_x) * 2) / 10)
+#define AR5K_EEPROM_N_CTLS(_v)		AR5K_EEPROM_OFF(_v, 16, 32)
+#define AR5K_EEPROM_MAX_CTLS		32
+#define AR5K_EEPROM_N_XPD_PER_CHANNEL	4
+#define AR5K_EEPROM_N_XPD0_POINTS	4
+#define AR5K_EEPROM_N_XPD3_POINTS	3
+#define AR5K_EEPROM_N_INTERCEPT_10_2GHZ	35
+#define AR5K_EEPROM_N_INTERCEPT_10_5GHZ	55
+#define AR5K_EEPROM_POWER_M		0x3f
+#define AR5K_EEPROM_POWER_MIN		0
+#define AR5K_EEPROM_POWER_MAX		3150
+#define AR5K_EEPROM_POWER_STEP		50
+#define AR5K_EEPROM_POWER_TABLE_SIZE	64
+#define AR5K_EEPROM_N_POWER_LOC_11B	4
+#define AR5K_EEPROM_N_POWER_LOC_11G	6
+#define AR5K_EEPROM_I_GAIN		10
+#define AR5K_EEPROM_CCK_OFDM_DELTA	15
+#define AR5K_EEPROM_N_IQ_CAL		2
+
+enum ath5k_ant_setting {
+	AR5K_ANT_VARIABLE	= 0,	/* variable by programming */
+	AR5K_ANT_FIXED_A	= 1,	/* fixed to 11a frequencies */
+	AR5K_ANT_FIXED_B	= 2,	/* fixed to 11b frequencies */
+	AR5K_ANT_MAX		= 3,
+};
 
-#define AR5K_EEPROM_HDR			AR5K_EEPROM_INFO(2)	/* Header that contains the device caps */
-#define AR5K_EEPROM_HDR_11A(_v)		(((_v) >> AR5K_EEPROM_MODE_11A) & 0x1)	/* Device has a support */
-#define AR5K_EEPROM_HDR_11B(_v)		(((_v) >> AR5K_EEPROM_MODE_11B) & 0x1)	/* Device has b support */
-#define AR5K_EEPROM_HDR_11G(_v)		(((_v) >> AR5K_EEPROM_MODE_11G) & 0x1)	/* Device has g support */
-#define AR5K_EEPROM_HDR_T_2GHZ_DIS(_v)	(((_v) >> 3) & 0x1)	/* Disable turbo for 2Ghz (?) */
-#define AR5K_EEPROM_HDR_T_5GHZ_DBM(_v)	(((_v) >> 4) & 0x7f)	/* Max turbo power for a/XR mode (eeprom_init) */
-#define AR5K_EEPROM_HDR_DEVICE(_v)	(((_v) >> 11) & 0x7)
-#define AR5K_EEPROM_HDR_T_5GHZ_DIS(_v)	(((_v) >> 15) & 0x1)	/* Disable turbo for 5Ghz (?) */
-#define AR5K_EEPROM_HDR_RFKILL(_v)	(((_v) >> 14) & 0x1)	/* Device has RFKill support */
+/* Per channel calibration data, used for power table setup */
+struct ath5k_chan_pcal_info {
+	u_int16_t	freq; /* Frequency */
+	/* Power levels in dBm * 4 units */
+	int16_t		pwr_x0[AR5K_EEPROM_N_XPD0_POINTS];
+	int16_t		pwr_x3[AR5K_EEPROM_N_XPD3_POINTS];
+	/* PCDAC tables in dBm * 2 units */
+	u_int16_t	pcdac_x0[AR5K_EEPROM_N_XPD0_POINTS];
+	u_int16_t	pcdac_x3[AR5K_EEPROM_N_XPD3_POINTS];
+	/* Max available power */
+	u_int16_t	max_pwr;
+};
 
-/* Misc values available since EEPROM 4.0 */
-#define AR5K_EEPROM_MISC0		0x00c4
-#define AR5K_EEPROM_EARSTART(_v)	((_v) & 0xfff)
-#define AR5K_EEPROM_EEMAP(_v)		(((_v) >> 14) & 0x3)
-#define AR5K_EEPROM_MISC1		0x00c5
-#define AR5K_EEPROM_TARGET_PWRSTART(_v)	((_v) & 0xfff)
-#define AR5K_EEPROM_HAS32KHZCRYSTAL(_v)	(((_v) >> 14) & 0x1)
+/* Per rate calibration data for each mode, used for power table setup */
+struct ath5k_rate_pcal_info {
+	u_int16_t	freq; /* Frequency */
+	/* Power level for 6-24Mbit/s rates */
+	u_int16_t	target_power_6to24;
+	/* Power level for 36Mbit rate */
+	u_int16_t	target_power_36;
+	/* Power level for 48Mbit rate */
+	u_int16_t	target_power_48;
+	/* Power level for 54Mbit rate */
+	u_int16_t	target_power_54;
+};
+
+/* EEPROM calibration data */
+struct ath5k_eeprom_info {
+
+	/* Header information */
+	u_int16_t	ee_magic;
+	u_int16_t	ee_protect;
+	u_int16_t	ee_regdomain;
+	u_int16_t	ee_version;
+	u_int16_t	ee_header;
+	u_int16_t	ee_ant_gain;
+	u_int16_t	ee_misc0;
+	u_int16_t	ee_misc1;
+	u_int16_t	ee_cck_ofdm_gain_delta;
+	u_int16_t	ee_cck_ofdm_power_delta;
+	u_int16_t	ee_scaled_cck_delta;
+
+	/* Used for tx thermal adjustment (eeprom_init, rfregs) */
+	u_int16_t	ee_tx_clip;
+	u_int16_t	ee_pwd_84;
+	u_int16_t	ee_pwd_90;
+	u_int16_t	ee_gain_select;
+
+	/* RF Calibration settings (reset, rfregs) */
+	u_int16_t	ee_i_cal[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_q_cal[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_fixed_bias[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_turbo_max_power[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_xr_power[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_switch_settling[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_ant_tx_rx[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_ant_control[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_PCDAC];
+	u_int16_t	ee_ob[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+	u_int16_t	ee_db[AR5K_EEPROM_N_MODES][AR5K_EEPROM_N_OBDB];
+	u_int16_t	ee_tx_end2xlna_enable[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_tx_end2xpa_disable[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_tx_frm2xpa_enable[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_thr_62[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_xlna_gain[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_xpd[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_x_gain[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_i_gain[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_margin_tx_rx[AR5K_EEPROM_N_MODES];
+
+	/* Power calibration data */
+	u_int16_t	ee_false_detect[AR5K_EEPROM_N_MODES];
+	u_int16_t	ee_cal_piers_a;
+	struct ath5k_chan_pcal_info	ee_pwr_cal_a[AR5K_EEPROM_N_5GHZ_CHAN];
+	u_int16_t	ee_cal_piers_b;
+	struct ath5k_chan_pcal_info	ee_pwr_cal_b[AR5K_EEPROM_N_2GHZ_CHAN];
+	u_int16_t	ee_cal_piers_g;
+	struct ath5k_chan_pcal_info	ee_pwr_cal_g[AR5K_EEPROM_N_2GHZ_CHAN];
+	/* Per rate target power levels */
+	u_int16_t	ee_rate_target_pwr_num_a;
+	struct ath5k_rate_pcal_info	ee_rate_tpwr_a[AR5K_EEPROM_N_5GHZ_CHAN];
+	u_int16_t	ee_rate_target_pwr_num_b;
+	struct ath5k_rate_pcal_info	ee_rate_tpwr_b[AR5K_EEPROM_N_2GHZ_CHAN];
+	u_int16_t	ee_rate_target_pwr_num_g;
+	struct ath5k_rate_pcal_info	ee_rate_tpwr_g[AR5K_EEPROM_N_2GHZ_CHAN];
+
+	/* Conformance test limits (Unused) */
+	u_int16_t	ee_ctls;
+	u_int16_t	ee_ctl[AR5K_EEPROM_MAX_CTLS];
+
+	/* Noise Floor Calibration settings */
+	int16_t		ee_noise_floor_thr[AR5K_EEPROM_N_MODES];
+	int8_t		ee_adc_desired_size[AR5K_EEPROM_N_MODES];
+	int8_t		ee_pga_desired_size[AR5K_EEPROM_N_MODES];
+
+	u_int32_t	ee_antenna[AR5K_EEPROM_N_MODES][AR5K_ANT_MAX];
+};
 
 /*
  * Read data by masking
@@ -350,7 +486,6 @@ static const struct ath5k_srev_name ath5
 	(*((volatile u_int32_t *)(mem + (_reg))) = (_val))
 #endif
 
-
 #define AR5K_REG_ENABLE_BITS(_reg, _flags)	\
 	AR5K_REG_WRITE(_reg, AR5K_REG_READ(_reg) | (_flags))
 
@@ -359,7 +494,12 @@ static const struct ath5k_srev_name ath5
 
 #define AR5K_TUNE_REGISTER_TIMEOUT		20000
 
-/* names for eeprom fields */
+#define AR5K_EEPROM_READ(_o, _v) do {					\
+	if ((ret = ath5k_hw_eeprom_read(mem, (_o), &(_v), mac_version)) != 0)	\
+		return (ret);						\
+} while (0)
+
+/* Names for EEPROM fields */
 struct eeprom_entry {
 	const char *name;
 	int addr;
@@ -375,8 +515,6 @@ static const struct eeprom_entry eeprom_
 	{"regdomain", AR5K_EEPROM_REG_DOMAIN},
 };
 
-static const int eeprom_addr_len = sizeof(eeprom_addr) / sizeof(eeprom_addr[0]);
-
 static int force_write = 0;
 static int verbose = 0;
 
@@ -398,8 +536,8 @@ static u_int32_t ath5k_hw_bitswap(u_int3
 /*
  * Get the PHY Chip revision
  */
-static u_int16_t
-ath5k_hw_radio_revision(u_int16_t mac_version, void *mem, u_int8_t chip)
+static u_int16_t ath5k_hw_radio_revision(u_int16_t mac_version, void *mem,
+					 u_int8_t chip)
 {
 	int i;
 	u_int32_t srev;
@@ -427,7 +565,7 @@ ath5k_hw_radio_revision(u_int16_t mac_ve
 	for (i = 0; i < 8; i++)
 		AR5K_REG_WRITE(AR5K_PHY(0x20), 0x00010000);
 
-	if (mac_version == AR5K_SREV_VER_AR5210) {
+	if (mac_version == AR5K_SREV_MAC_AR5210) {
 		srev = AR5K_REG_READ(AR5K_PHY(256) >> 28) & 0xf;
 
 		ret = (u_int16_t)ath5k_hw_bitswap(srev, 4) + 1;
@@ -447,9 +585,8 @@ ath5k_hw_radio_revision(u_int16_t mac_ve
 /*
  * Write to EEPROM
  */
-static int
-ath5k_hw_eeprom_write(void *mem, u_int32_t offset, u_int16_t data,
-		      u_int8_t mac_version)
+static int ath5k_hw_eeprom_write(void *mem, u_int32_t offset, u_int16_t data,
+				 u_int8_t mac_version)
 {
 	u_int32_t status, timeout;
 
@@ -457,7 +594,7 @@ ath5k_hw_eeprom_write(void *mem, u_int32
 	 * Initialize EEPROM access
 	 */
 
-	if (mac_version == AR5K_SREV_VER_AR5210) {
+	if (mac_version == AR5K_SREV_MAC_AR5210) {
 
 		AR5K_REG_ENABLE_BITS(AR5K_PCICFG, AR5K_PCICFG_EEAE);
 
@@ -466,7 +603,7 @@ ath5k_hw_eeprom_write(void *mem, u_int32
 
 	} else {
 		/* not 5210 */
-		/* reset eeprom access */
+		/* reset EEPROM access */
 		AR5K_REG_WRITE(AR5K_EEPROM_CMD, AR5K_EEPROM_CMD_RESET);
 		usleep(5);
 
@@ -484,7 +621,7 @@ ath5k_hw_eeprom_write(void *mem, u_int32
 		status = AR5K_REG_READ(AR5K_EEPROM_STATUS);
 		if (status & AR5K_EEPROM_STAT_WRDONE) {
 			if (status & AR5K_EEPROM_STAT_WRERR) {
-				err("eeprom write access to 0x%04x failed",
+				err("EEPROM write access to 0x%04x failed",
 				    offset);
 				return 1;
 			}
@@ -499,16 +636,15 @@ ath5k_hw_eeprom_write(void *mem, u_int32
 /*
  * Read from EEPROM
  */
-static int
-ath5k_hw_eeprom_read(void *mem, u_int32_t offset, u_int16_t *data,
-		     u_int8_t mac_version)
+static int ath5k_hw_eeprom_read(void *mem, u_int32_t offset, u_int16_t *data,
+				u_int8_t mac_version)
 {
 	u_int32_t status, timeout;
 
 	/*
 	 * Initialize EEPROM access
 	 */
-	if (mac_version == AR5K_SREV_VER_AR5210) {
+	if (mac_version == AR5K_SREV_MAC_AR5210) {
 		AR5K_REG_ENABLE_BITS(AR5K_PCICFG, AR5K_PCICFG_EEAE);
 		(void)AR5K_REG_READ(AR5K_EEPROM_BASE + (4 * offset));
 	} else {
@@ -531,50 +667,701 @@ ath5k_hw_eeprom_read(void *mem, u_int32_
 	return 1;
 }
 
-static const char *ath5k_hw_get_part_name(enum ath5k_srev_type type,
-					  u_int32_t val)
+/*
+ * Translate binary channel representation in EEPROM to frequency
+ */
+static u_int16_t ath5k_eeprom_bin2freq(struct ath5k_eeprom_info *ee,
+				       u_int16_t bin, unsigned int mode)
 {
-	const char *name = "xxxxx";
-	int i;
+	u_int16_t val;
 
-	for (i = 0; i < ARRAY_SIZE(ath5k_srev_names); i++) {
-		if (ath5k_srev_names[i].sr_type != type ||
-		    ath5k_srev_names[i].sr_val == AR5K_SREV_UNKNOWN)
-			continue;
-		if ((val & 0xff) < ath5k_srev_names[i + 1].sr_val) {
-			name = ath5k_srev_names[i].sr_name;
+	if (bin == AR5K_EEPROM_CHANNEL_DIS)
+		return bin;
+
+	if (mode == AR5K_EEPROM_MODE_11A) {
+		if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
+			val = (5 * bin) + 4800;
+		else
+			val = bin > 62 ? (10 * 62) + (5 * (bin - 62)) + 5100 :
+			    (bin * 10) + 5100;
+	} else {
+		if (ee->ee_version > AR5K_EEPROM_VERSION_3_2)
+			val = bin + 2300;
+		else
+			val = bin + 2400;
+	}
+
+	return val;
+}
+
+/*
+ * Read antenna info from EEPROM
+ */
+static int ath5k_eeprom_read_ants(void *mem, u_int8_t mac_version,
+				  struct ath5k_eeprom_info *ee,
+				  u_int32_t *offset, unsigned int mode)
+{
+	u_int32_t o = *offset;
+	u_int16_t val;
+	int ret, i = 0;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_switch_settling[mode]	= (val >> 8) & 0x7f;
+	ee->ee_ant_tx_rx[mode]		= (val >> 2) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
+	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= val & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	= (val >> 10) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= (val >> 4) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 2) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 14) & 0x3;
+	ee->ee_ant_control[mode][i++]	= (val >> 8) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= (val >> 2) & 0x3f;
+	ee->ee_ant_control[mode][i]	= (val << 4) & 0x3f;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_ant_control[mode][i++]	|= (val >> 12) & 0xf;
+	ee->ee_ant_control[mode][i++]	= (val >> 6) & 0x3f;
+	ee->ee_ant_control[mode][i++]	= val & 0x3f;
+
+	/* Get antenna modes */
+	ee->ee_antenna[mode][0] =
+	    (ee->ee_ant_control[mode][0] << 4) | 0x1;
+	ee->ee_antenna[mode][AR5K_ANT_FIXED_A] =
+	     ee->ee_ant_control[mode][1]	|
+	    (ee->ee_ant_control[mode][2] << 6)	|
+	    (ee->ee_ant_control[mode][3] << 12) |
+	    (ee->ee_ant_control[mode][4] << 18) |
+	    (ee->ee_ant_control[mode][5] << 24);
+	ee->ee_antenna[mode][AR5K_ANT_FIXED_B] =
+	     ee->ee_ant_control[mode][6]	|
+	    (ee->ee_ant_control[mode][7] << 6)	|
+	    (ee->ee_ant_control[mode][8] << 12) |
+	    (ee->ee_ant_control[mode][9] << 18) |
+	    (ee->ee_ant_control[mode][10] << 24);
+
+	/* return new offset */
+	*offset = o;
+
+	return 0;
+}
+
+/*
+ * Read supported modes from EEPROM
+ */
+static int ath5k_eeprom_read_modes(void *mem, u_int8_t mac_version,
+				   struct ath5k_eeprom_info *ee,
+				   u_int32_t *offset, unsigned int mode)
+{
+	u_int32_t o = *offset;
+	u_int16_t val;
+	int ret;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_tx_end2xlna_enable[mode]	= (val >> 8) & 0xff;
+	ee->ee_thr_62[mode]		= val & 0xff;
+
+	if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2)
+		ee->ee_thr_62[mode] = mode == AR5K_EEPROM_MODE_11A ? 15 : 28;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_tx_end2xpa_disable[mode]	= (val >> 8) & 0xff;
+	ee->ee_tx_frm2xpa_enable[mode]	= val & 0xff;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_pga_desired_size[mode]	= (val >> 8) & 0xff;
+
+	if ((val & 0xff) & 0x80)
+		ee->ee_noise_floor_thr[mode] = -((((val & 0xff) ^ 0xff)) + 1);
+	else
+		ee->ee_noise_floor_thr[mode] = val & 0xff;
+
+	if (ee->ee_version <= AR5K_EEPROM_VERSION_3_2)
+		ee->ee_noise_floor_thr[mode] =
+		    mode == AR5K_EEPROM_MODE_11A ? -54 : -1;
+
+	AR5K_EEPROM_READ(o++, val);
+	ee->ee_xlna_gain[mode]		= (val >> 5) & 0xff;
+	ee->ee_x_gain[mode]		= (val >> 1) & 0xf;
+	ee->ee_xpd[mode]		= val & 0x1;
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0)
+		ee->ee_fixed_bias[mode] = (val >> 13) & 0x1;
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_3_3) {
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_false_detect[mode] = (val >> 6) & 0x7f;
+
+		if (mode == AR5K_EEPROM_MODE_11A)
+			ee->ee_xr_power[mode] = val & 0x3f;
+		else {
+			ee->ee_ob[mode][0] = val & 0x7;
+			ee->ee_db[mode][0] = (val >> 3) & 0x7;
+		}
+	}
+
+	if (ee->ee_version < AR5K_EEPROM_VERSION_3_4) {
+		ee->ee_i_gain[mode] = AR5K_EEPROM_I_GAIN;
+		ee->ee_cck_ofdm_power_delta = AR5K_EEPROM_CCK_OFDM_DELTA;
+	} else {
+		ee->ee_i_gain[mode] = (val >> 13) & 0x7;
+
+		AR5K_EEPROM_READ(o++, val);
+		ee->ee_i_gain[mode] |= (val << 3) & 0x38;
+
+		if (mode == AR5K_EEPROM_MODE_11G)
+			ee->ee_cck_ofdm_power_delta = (val >> 3) & 0xff;
+	}
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0 &&
+	    mode == AR5K_EEPROM_MODE_11A) {
+		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+	}
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_4_6 &&
+	    mode == AR5K_EEPROM_MODE_11G)
+		ee->ee_scaled_cck_delta = (val >> 11) & 0x1f;
+
+	/* return new offset */
+	*offset = o;
+
+	return 0;
+}
+
+/*
+ * Read per channel calibration info from EEPROM
+ * This doesn't work on 2112+ chips (EEPROM versions >= 4.6),
+ * I only tested it on 5213 + 5112. This is still work in progress...
+ *
+ * This info is used to calibrate the baseband power table. Imagine
+ * that for each channel there is a power curve that's hw specific
+ * (depends on amplifier) and we try to "correct" this curve using offests
+ * we pass on to phy chip (baseband -> before amplifier) so that it can
+ * use acurate power values when setting tx power (takes amplifier's performance
+ * on each channel into account).
+ *
+ * EEPROM provides us with the offsets for some pre-calibrated channels
+ * and we have to scale (to create the full table for these channels) and
+ * interpolate (in order to create the table for any channel).
+ */
+static int ath5k_eeprom_read_pcal_info(void *mem, u_int8_t mac_version,
+				       struct ath5k_eeprom_info *ee,
+				       u_int32_t *offset, unsigned int mode)
+{
+	u_int32_t o = *offset;
+	unsigned int i, c;
+	int ret;
+	u_int16_t val;
+	struct ath5k_chan_pcal_info *chan_pcal_info;
+	u_int16_t cal_piers;
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		chan_pcal_info = ee->ee_pwr_cal_a;
+		cal_piers = ee->ee_cal_piers_a;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		chan_pcal_info = ee->ee_pwr_cal_b;
+		cal_piers = ee->ee_cal_piers_b;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		chan_pcal_info = ee->ee_pwr_cal_g;
+		cal_piers = ee->ee_cal_piers_g;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	for (i = 0; i < cal_piers; i++) {
+		/* Power values in dBm * 4 */
+		for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
+			AR5K_EEPROM_READ(o++, val);
+			chan_pcal_info[i].pwr_x0[c] = (val & 0xff);
+			chan_pcal_info[i].pwr_x0[++c] = ((val >> 8) & 0xff);
+		}
+
+		/* PCDAC steps (dBm * 2) */
+		AR5K_EEPROM_READ(o++, val);
+		chan_pcal_info[i].pcdac_x0[1] = (val & 0x1f);
+		chan_pcal_info[i].pcdac_x0[2] = ((val >> 5) & 0x1f);
+		chan_pcal_info[i].pcdac_x0[3] = ((val >> 10) & 0x1f);
+
+		/* No idea what these power levels are for (4 xpds ?)
+		   I got zeroes on my card and the EEPROM info
+		   dumps we found on the net also have weird values */
+		AR5K_EEPROM_READ(o++, val);
+		chan_pcal_info[i].pwr_x3[0] = (val & 0xff);
+		chan_pcal_info[i].pwr_x3[1] = ((val >> 8) & 0xff);
+
+		AR5K_EEPROM_READ(o++, val);
+		chan_pcal_info[i].pwr_x3[2] = (val & 0xff);
+		/* It's weird but they put it here, that's the
+		   PCDAC starting step */
+		chan_pcal_info[i].pcdac_x0[0] = ((val >> 8) & 0xff);
+
+		/* Static values seen on EEPROM info dumps */
+		chan_pcal_info[i].pcdac_x3[0] = 20;
+		chan_pcal_info[i].pcdac_x3[1] = 35;
+		chan_pcal_info[i].pcdac_x3[2] = 63;
+
+		/* Last xpd0 power level is also channel maximum */
+		chan_pcal_info[i].max_pwr = chan_pcal_info[i].pwr_x0[3];
+
+		/* Recreate pcdac_x0 table for this channel using pcdac steps */
+		chan_pcal_info[i].pcdac_x0[1] += chan_pcal_info[i].pcdac_x0[0];
+		chan_pcal_info[i].pcdac_x0[2] += chan_pcal_info[i].pcdac_x0[1];
+		chan_pcal_info[i].pcdac_x0[3] += chan_pcal_info[i].pcdac_x0[2];
+	}
+
+	/* return new offset */
+	(*offset) = o;
+
+	return 0;
+}
+
+/*
+ * Read per rate target power (this is the maximum tx power
+ * supported by the card). This info is used when setting
+ * tx power, no matter the channel.
+ *
+ * This also works for v5 EEPROMs.
+ */
+static int ath5k_eeprom_read_target_rate_pwr_info(void *mem,
+						  u_int8_t mac_version,
+						  struct ath5k_eeprom_info *ee,
+						  u_int32_t *offset,
+						  unsigned int mode)
+{
+	u_int32_t o = *offset;
+	u_int16_t val;
+	struct ath5k_rate_pcal_info *rate_pcal_info;
+	u_int16_t *rate_target_pwr_num;
+	int ret, i;
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		rate_pcal_info = ee->ee_rate_tpwr_a;
+		ee->ee_rate_target_pwr_num_a = AR5K_EEPROM_N_5GHZ_CHAN;
+		rate_target_pwr_num = &ee->ee_rate_target_pwr_num_a;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		rate_pcal_info = ee->ee_rate_tpwr_b;
+		ee->ee_rate_target_pwr_num_b = 2; /* 3rd is g mode'ss 1st */
+		rate_target_pwr_num = &ee->ee_rate_target_pwr_num_b;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		rate_pcal_info = ee->ee_rate_tpwr_g;
+		ee->ee_rate_target_pwr_num_g = AR5K_EEPROM_N_2GHZ_CHAN;
+		rate_target_pwr_num = &ee->ee_rate_target_pwr_num_g;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Different freq mask for older eeproms (<= v3.2) */
+	if(ee->ee_version <= 0x3002){
+		for (i = 0; i < (*rate_target_pwr_num); i++) {
+			AR5K_EEPROM_READ(o++, val);
+			rate_pcal_info[i].freq =
+			    ath5k_eeprom_bin2freq(ee, (val >> 9) & 0x7f, mode);
+	
+			rate_pcal_info[i].target_power_6to24 = ((val >> 3) & 0x3f);
+			rate_pcal_info[i].target_power_36 = (val << 3) & 0x3f;
+	
+			AR5K_EEPROM_READ(o++, val);
+	
+			if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
+			    val == 0) {
+				(*rate_target_pwr_num) = i;
+				break;
+			}
+
+			rate_pcal_info[i].target_power_36 |= ((val >> 13) & 0x7);
+			rate_pcal_info[i].target_power_48 = ((val >> 7) & 0x3f);
+			rate_pcal_info[i].target_power_54 = ((val >> 1) & 0x3f);
+		}
+	} else {
+		for (i = 0; i < (*rate_target_pwr_num); i++) {
+			AR5K_EEPROM_READ(o++, val);
+			rate_pcal_info[i].freq =
+			    ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+	
+			rate_pcal_info[i].target_power_6to24 = ((val >> 2) & 0x3f);
+			rate_pcal_info[i].target_power_36 = (val << 4) & 0x3f;
+	
+			AR5K_EEPROM_READ(o++, val);
+	
+			if (rate_pcal_info[i].freq == AR5K_EEPROM_CHANNEL_DIS ||
+			    val == 0) {
+				(*rate_target_pwr_num) = i;
+				break;
+			}
+
+			rate_pcal_info[i].target_power_36 |= (val >> 12) & 0xf;
+			rate_pcal_info[i].target_power_48 = ((val >> 6) & 0x3f);
+			rate_pcal_info[i].target_power_54 = (val & 0x3f);
+		}
+	}
+	/* return new offset */
+	(*offset) = o;
+
+	return 0;
+}
+
+/*
+ * Initialize EEPROM & capabilities data
+ */
+static int ath5k_eeprom_init(void *mem, u_int8_t mac_version,
+			     struct ath5k_eeprom_info *ee)
+{
+	unsigned int mode, i;
+	int ret;
+	u_int32_t offset;
+	u_int16_t val;
+
+	/* Initial TX thermal adjustment values */
+	ee->ee_tx_clip = 4;
+	ee->ee_pwd_84 = ee->ee_pwd_90 = 1;
+	ee->ee_gain_select = 1;
+
+	/*
+	 * Read values from EEPROM and store them in the capability structure
+	 */
+	AR5K_EEPROM_READ(AR5K_EEPROM_MAGIC, ee->ee_magic);
+	AR5K_EEPROM_READ(AR5K_EEPROM_PROTECT, ee->ee_protect);
+	AR5K_EEPROM_READ(AR5K_EEPROM_REG_DOMAIN, ee->ee_regdomain);
+	AR5K_EEPROM_READ(AR5K_EEPROM_VERSION, ee->ee_version);
+	AR5K_EEPROM_READ(AR5K_EEPROM_HDR, ee->ee_header);
+
+	/* Return if we have an old EEPROM */
+	if (ee->ee_version < AR5K_EEPROM_VERSION_3_0)
+		return 0;
+
+#ifdef notyet
+	/*
+	 * Validate the checksum of the EEPROM date. There are some
+	 * devices with invalid EEPROMs.
+	 */
+	for (cksum = 0, offset = 0; offset < AR5K_EEPROM_INFO_MAX; offset++) {
+		AR5K_EEPROM_READ(AR5K_EEPROM_INFO(offset), val);
+		cksum ^= val;
+	}
+	if (cksum != AR5K_EEPROM_INFO_CKSUM) {
+		AR5K_PRINTF("Invalid EEPROM checksum 0x%04x\n", cksum);
+		return -EIO;
+	}
+#endif
+
+	AR5K_EEPROM_READ(AR5K_EEPROM_ANT_GAIN(ee->ee_version), ee->ee_ant_gain);
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ(AR5K_EEPROM_MISC0, ee->ee_misc0);
+		AR5K_EEPROM_READ(AR5K_EEPROM_MISC1, ee->ee_misc1);
+	}
+
+	if (ee->ee_version < AR5K_EEPROM_VERSION_3_3) {
+		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB0_2GHZ, val);
+		ee->ee_ob[AR5K_EEPROM_MODE_11B][0] = val & 0x7;
+		ee->ee_db[AR5K_EEPROM_MODE_11B][0] = (val >> 3) & 0x7;
+
+		AR5K_EEPROM_READ(AR5K_EEPROM_OBDB1_2GHZ, val);
+		ee->ee_ob[AR5K_EEPROM_MODE_11G][0] = val & 0x7;
+		ee->ee_db[AR5K_EEPROM_MODE_11G][0] = (val >> 3) & 0x7;
+	}
+
+	/*
+	 * Get conformance test limit values
+	 */
+	offset = AR5K_EEPROM_CTL(ee->ee_version);
+	ee->ee_ctls = 0;
+
+	for (i = 0; i < AR5K_EEPROM_N_CTLS(ee->ee_version); i++) {
+		AR5K_EEPROM_READ(offset++, val);
+
+		if (((val >> 8) & 0xff) == 0)
+			break;
+
+		ee->ee_ctl[i] = (val >> 8) & 0xff;
+		ee->ee_ctls++;
+
+		if ((val & 0xff) == 0)
 			break;
+
+		ee->ee_ctl[i + 1] = val & 0xff;
+		ee->ee_ctls++;
+	}
+
+	/*
+	 * Get values for 802.11a (5GHz)
+	 */
+	mode = AR5K_EEPROM_MODE_11A;
+
+	ee->ee_turbo_max_power[mode] =
+	    AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header);
+
+	offset = AR5K_EEPROM_MODES_11A(ee->ee_version);
+
+	ret = ath5k_eeprom_read_ants(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_adc_desired_size[mode]	= (int8_t)((val >> 8) & 0xff);
+	ee->ee_ob[mode][3]		= (val >> 5) & 0x7;
+	ee->ee_db[mode][3]		= (val >> 2) & 0x7;
+	ee->ee_ob[mode][2]		= (val << 1) & 0x7;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_ob[mode][2]		|= (val >> 15) & 0x1;
+	ee->ee_db[mode][2]		= (val >> 12) & 0x7;
+	ee->ee_ob[mode][1]		= (val >> 9) & 0x7;
+	ee->ee_db[mode][1]		= (val >> 6) & 0x7;
+	ee->ee_ob[mode][0]		= (val >> 3) & 0x7;
+	ee->ee_db[mode][0]		= val & 0x7;
+
+	ret = ath5k_eeprom_read_modes(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_4_1) {
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_margin_tx_rx[mode] = val & 0x3f;
+	}
+
+	/*
+	 * Get values for 802.11b (2.4GHz)
+	 */
+	mode = AR5K_EEPROM_MODE_11B;
+	offset = AR5K_EEPROM_MODES_11B(ee->ee_version);
+
+	ret = ath5k_eeprom_read_ants(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_adc_desired_size[mode]	= (int8_t)((val >> 8) & 0xff);
+	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
+	ee->ee_db[mode][1]		= val & 0x7;
+
+	ret = ath5k_eeprom_read_modes(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ(offset++, val);
+
+		ee->ee_cal_piers_b = 0;
+
+		ee->ee_pwr_cal_b[0].freq =
+			ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+		if (ee->ee_pwr_cal_b[0].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_cal_piers_b++;
+
+		ee->ee_pwr_cal_b[1].freq =
+			ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+		if (ee->ee_pwr_cal_b[1].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_cal_piers_b++;
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_pwr_cal_b[2].freq =
+			ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+		if (ee->ee_pwr_cal_b[2].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_cal_piers_b++;
+	}
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_4_1)
+		ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+	/*
+	 * Get values for 802.11g (2.4GHz)
+	 */
+	mode = AR5K_EEPROM_MODE_11G;
+	offset = AR5K_EEPROM_MODES_11G(ee->ee_version);
+
+	ret = ath5k_eeprom_read_ants(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	AR5K_EEPROM_READ(offset++, val);
+	ee->ee_adc_desired_size[mode]	= (signed short int)((val >> 8) & 0xff);
+	ee->ee_ob[mode][1]		= (val >> 4) & 0x7;
+	ee->ee_db[mode][1]		= val & 0x7;
+
+	ret = ath5k_eeprom_read_modes(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	if (ee->ee_version >= AR5K_EEPROM_VERSION_4_0) {
+		AR5K_EEPROM_READ(offset++, val);
+
+		ee->ee_cal_piers_g = 0;
+
+		ee->ee_pwr_cal_g[0].freq =
+			ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+		if (ee->ee_pwr_cal_g[0].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_cal_piers_g++;
+
+		ee->ee_pwr_cal_g[1].freq =
+			ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, mode);
+		if (ee->ee_pwr_cal_g[1].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_cal_piers_g++;
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_turbo_max_power[mode] = val & 0x7f;
+		ee->ee_xr_power[mode] = (val >> 7) & 0x3f;
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_pwr_cal_g[2].freq =
+			ath5k_eeprom_bin2freq(ee, val & 0xff, mode);
+		if (ee->ee_pwr_cal_g[2].freq != AR5K_EEPROM_CHANNEL_DIS)
+			ee->ee_cal_piers_g++;
+
+		if (ee->ee_version >= AR5K_EEPROM_VERSION_4_1)
+			ee->ee_margin_tx_rx[mode] = (val >> 8) & 0x3f;
+
+		AR5K_EEPROM_READ(offset++, val);
+		ee->ee_i_cal[mode] = (val >> 8) & 0x3f;
+		ee->ee_q_cal[mode] = (val >> 3) & 0x1f;
+
+		if (ee->ee_version >= AR5K_EEPROM_VERSION_4_2) {
+			AR5K_EEPROM_READ(offset++, val);
+			ee->ee_cck_ofdm_gain_delta = val & 0xff;
 		}
 	}
 
-	return (name);
+	/*
+	 * Read 5GHz EEPROM channels
+	 */
+	offset = AR5K_EEPROM_CHANNELS_5GHZ(ee->ee_version);
+	ee->ee_cal_piers_a = 0;
+	for (i = 0; i < AR5K_EEPROM_N_5GHZ_CHAN; i++) {
+		AR5K_EEPROM_READ(offset++, val);
+
+		if ((val & 0xff) == 0)
+			break;
+
+		ee->ee_pwr_cal_a[i].freq =
+			ath5k_eeprom_bin2freq(ee, val & 0xff, AR5K_EEPROM_MODE_11A);
+		ee->ee_cal_piers_a++;
+
+		if (((val >> 8) & 0xff) == 0)
+			break;
+
+		ee->ee_pwr_cal_a[++i].freq =
+			ath5k_eeprom_bin2freq(ee, (val >> 8) & 0xff, AR5K_EEPROM_MODE_11A);
+		ee->ee_cal_piers_a++;
+
+	}
+
+	/*
+	 * Read power calibration info
+	 */
+	mode = AR5K_EEPROM_MODE_11A;
+	ret = ath5k_eeprom_read_pcal_info(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	mode = AR5K_EEPROM_MODE_11B;
+	ret = ath5k_eeprom_read_pcal_info(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	mode = AR5K_EEPROM_MODE_11G;
+	ret = ath5k_eeprom_read_pcal_info(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+
+	/*
+	 * Read per rate target power info
+	 */
+	offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) + AR5K_EEPROM_TARGET_PWR_OFF_11A(ee->ee_version);
+	mode = AR5K_EEPROM_MODE_11A;
+	ret = ath5k_eeprom_read_target_rate_pwr_info(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) + AR5K_EEPROM_TARGET_PWR_OFF_11B(ee->ee_version);
+	mode = AR5K_EEPROM_MODE_11B;
+	ret = ath5k_eeprom_read_target_rate_pwr_info(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	offset = AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1) + AR5K_EEPROM_TARGET_PWR_OFF_11G(ee->ee_version);
+	mode = AR5K_EEPROM_MODE_11G;
+	ret = ath5k_eeprom_read_target_rate_pwr_info(mem, mac_version, ee, &offset, mode);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const char *ath5k_hw_get_mac_name(u_int8_t val)
+{
+	static char name[16];
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(ath5k_mac_names); i++) {
+		if (val <= ath5k_mac_names[i].sr_val)
+			break;
+	}
+
+	if (val == ath5k_mac_names[i].sr_val)
+		return ath5k_mac_names[i].sr_name;
+
+	snprintf(name, sizeof(name), "%s+", ath5k_mac_names[i - 1].sr_name);
+	return name;
+}
+
+static const char *ath5k_hw_get_phy_name(u_int8_t val)
+{
+	const char *name = "?????";
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(ath5k_phy_names); i++) {
+		if (val < ath5k_phy_names[i + 1].sr_val) {
+			name = ath5k_phy_names[i].sr_name;
+			break;
+		}
+	}
+
+	return name;
 }
 
 /* returns -1 on unknown name */
 static int eeprom_name2addr(const char *name)
 {
-	int i;
+	unsigned int i;
+
 	if (!name || !name[0])
 		return -1;
-	for (i = 0; i < eeprom_addr_len; i++)
+	for (i = 0; i < ARRAY_SIZE(eeprom_addr); i++)
 		if (!strcmp(name, eeprom_addr[i].name))
 			return eeprom_addr[i].addr;
 	return -1;
-}				/* eeprom_name2addr */
+}
 
 /* returns "<unknown>" on unknown address */
 static const char *eeprom_addr2name(int addr)
 {
-	int i;
-	for (i = 0; i < eeprom_addr_len; i++)
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(eeprom_addr); i++)
 		if (eeprom_addr[i].addr == addr)
 			return eeprom_addr[i].name;
 	return "<unknown>";
-}				/* eeprom_addr2name */
+}
 
-static int
-do_write_pairs(int anr, int argc, char **argv, unsigned char *mem,
-	       int mac_version)
+static int do_write_pairs(int anr, int argc, char **argv, unsigned char *mem,
+			  int mac_version)
 {
 #define MAX_NR_WRITES 16
 	struct {
@@ -635,7 +1422,7 @@ do_write_pairs(int anr, int argc, char *
 		}
 		anr++;
 		i++;
-	}			/* while (anr < (argc-1)) */
+	}
 
 	if (!(wr_ops_len = i)) {
 		err("no (addr,val) pairs given");
@@ -702,20 +1489,22 @@ do_write_pairs(int anr, int argc, char *
 	}
 
 	return errors ? 11 : 0;
-}				/* do_write_pairs */
+}
 
 static void usage(const char *n)
 {
-	int i;
+	unsigned int i;
 
-	fprintf(stderr, "%s [-w [-g N:M]] [-v] [-f] [-d] <base_address> "
+	fprintf(stderr, "%s [-w [-g N:M]] [-v] [-f] [-d] [-R addr] [-W addr val] <base_address> "
 		"[<name1> <val1> [<name2> <val2> ...]]\n\n", n);
 	fprintf(stderr,
 		"-w      write values into EEPROM\n"
 		"-g N:M  set GPIO N to level M (only used with -w)\n"
 		"-v      verbose output\n"
 		"-f      force; suppress question before writing\n"
-		"-d      dump eeprom (file 'ath-eeprom-dump.bin' and screen)\n"
+		"-d      dump EEPROM (file 'ath-eeprom-dump.bin' and screen)\n"
+		"-R <addr>       read register at <addr> (hex)\n"
+		"-W <addr> <val> write <val> (hex) into register at <addr> (hex)\n"
 		"<base_address>  device base address (see lspci output)\n\n");
 
 	fprintf(stderr,
@@ -725,8 +1514,8 @@ static void usage(const char *n)
 		"  %s -w <base_address> regdomain N\n\n"
 		"- set a PCI id field to value N:\n"
 		"  %s -w <base_address> <field> N\n"
-		"  where <field> is on of:\n    ", n, n, n);
-	for (i = 0; i < eeprom_addr_len; i++)
+		"  where <field> is one of:\n    ", n, n, n);
+	for (i = 0; i < ARRAY_SIZE(eeprom_addr); i++)
 		fprintf(stderr, " %s", eeprom_addr[i].name);
 	fprintf(stderr, "\n\n");
 	fprintf(stderr,
@@ -739,19 +1528,457 @@ static void usage(const char *n)
 		"unlawful radio transmissions!\n\n");
 }
 
+static void dump_capabilities(struct ath5k_eeprom_info *ee)
+{
+	u_int8_t has_a, has_b, has_g, has_rfkill, turbog_dis, turboa_dis;
+	u_int8_t xr2_dis, xr5_dis, has_crystal;
+
+	has_a = AR5K_EEPROM_HDR_11A(ee->ee_header);
+	has_b = AR5K_EEPROM_HDR_11B(ee->ee_header);
+	has_g = AR5K_EEPROM_HDR_11G(ee->ee_header);
+	has_rfkill = AR5K_EEPROM_HDR_RFKILL(ee->ee_header);
+	has_crystal = AR5K_EEPROM_HAS32KHZCRYSTAL(ee->ee_misc1);
+	turbog_dis = AR5K_EEPROM_HDR_T_2GHZ_DIS(ee->ee_header);
+	turboa_dis = AR5K_EEPROM_HDR_T_5GHZ_DIS(ee->ee_header);
+	xr2_dis = AR5K_EEPROM_HDR_XR2_DIS(ee->ee_misc0);
+	xr5_dis = AR5K_EEPROM_HDR_XR5_DIS(ee->ee_misc0);
+
+	printf("|================= Capabilities ================|\n");
+
+	printf("| 802.11a Support: ");
+	if (has_a)
+		printf(" yes |");
+	else
+		printf(" no  |");
+
+	printf(" Turbo-A disabled:");
+	if (turboa_dis)
+		printf(" yes |\n");
+	else
+		printf(" no  |\n");
+
+	printf("| 802.11b Support: ");
+	if (has_b)
+		printf(" yes |");
+	else
+		printf(" no  |");
+
+	printf(" Turbo-G disabled:");
+	if (turbog_dis)
+		printf(" yes |\n");
+	else
+		printf(" no  |\n");
+
+	printf("| 802.11g Support: ");
+	if (has_g)
+		printf(" yes |");
+	else
+		printf(" no  |");
+
+	printf(" 2GHz XR disabled:");
+	if (xr2_dis)
+		printf(" yes |\n");
+	else
+		printf(" no  |\n");
+
+	printf("| RFKill  Support: ");
+	if (has_rfkill)
+		printf(" yes |");
+	else
+		printf(" no  |");
+
+	printf(" 5GHz XR disabled:");
+	if (xr5_dis)
+		printf(" yes |\n");
+	else
+		printf(" no  |\n");
+
+	if (has_crystal != 2) {
+		printf("| 32kHz   Crystal: ");
+		if (has_crystal)
+			printf(" yes |");
+		else
+			printf(" no  |");
+
+		printf("                       |\n");
+	}
+
+	printf("\\===============================================/\n");
+}
+
+static void dump_calinfo_for_mode(int mode, struct ath5k_eeprom_info *ee)
+{
+	int i;
+
+	printf("|=========================================================|\n");
+	printf("| I power:              0x%02x |", ee->ee_i_cal[mode]);
+	printf(" Q power:              0x%02x |\n", ee->ee_q_cal[mode]);
+	printf("| Use fixed bias:       0x%02x |", ee->ee_fixed_bias[mode]);
+	printf(" Max turbo power:      0x%02x |\n", ee->ee_turbo_max_power[mode]);
+	printf("| Max XR power:         0x%02x |", ee->ee_xr_power[mode]);
+	printf(" Switch Settling Time: 0x%02x |\n", ee->ee_switch_settling[mode]);
+	printf("| Tx/Rx attenuation:    0x%02x |", ee->ee_ant_tx_rx[mode]);
+	printf(" TX end to XLNA On:    0x%02x |\n", ee->ee_tx_end2xlna_enable[mode]);
+	printf("| TX end to XPA Off:    0x%02x |", ee->ee_tx_end2xpa_disable[mode]);
+	printf(" TX end to XPA On:     0x%02x |\n", ee->ee_tx_frm2xpa_enable[mode]);
+	printf("| 62db Threshold:       0x%02x |", ee->ee_thr_62[mode]);
+	printf(" XLNA gain:            0x%02x |\n", ee->ee_xlna_gain[mode]);
+	printf("| XPD:                  0x%02x |", ee->ee_xpd[mode]);
+	printf(" XPD gain:             0x%02x |\n", ee->ee_x_gain[mode]);
+	printf("| I gain:               0x%02x |", ee->ee_i_gain[mode]);
+	printf(" Tx/Rx margin:         0x%02x |\n", ee->ee_margin_tx_rx[mode]);
+	printf("| False detect backoff: 0x%02x |", ee->ee_false_detect[mode]);
+	printf(" Noise Floor Threshold: %3d |\n", ee->ee_noise_floor_thr[mode]);
+	printf("| ADC desired size:      %3d |", ee->ee_adc_desired_size[mode]);
+	printf(" PGA desired size:      %3d |\n", ee->ee_pga_desired_size[mode]);
+	printf("|=========================================================|\n");
+	for (i = 0; i < AR5K_EEPROM_N_PCDAC; i++) {
+		printf("| Antenna control  %2i:  0x%02x |", i, ee->ee_ant_control[mode][i]);
+		i++;
+		printf(" Antenna control  %2i:  0x%02x |\n", i, ee->ee_ant_control[mode][i]);
+	}
+	printf("|=========================================================|\n");
+	for (i = 0; i < AR5K_EEPROM_N_OBDB; i++) {
+		printf("| Octave Band %i:          %2i |", i, ee->ee_ob[mode][i]);
+		printf(" db %i:                   %2i |\n", i, ee->ee_db[mode][i]);
+	}
+	printf("\\=========================================================/\n");
+}
+
+static void dump_power_calinfo_for_mode(int mode, struct ath5k_eeprom_info *ee)
+{
+	struct ath5k_chan_pcal_info *chan_pcal_info;
+	u_int16_t cal_piers;
+	int i, c;
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		chan_pcal_info = ee->ee_pwr_cal_a;
+		cal_piers = ee->ee_cal_piers_a;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		chan_pcal_info = ee->ee_pwr_cal_b;
+		cal_piers = ee->ee_cal_piers_b;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		chan_pcal_info = ee->ee_pwr_cal_g;
+		cal_piers = ee->ee_cal_piers_g;
+		break;
+	default:
+		return;
+	}
+
+	printf("/=================== Per channel power calibration ====================\\\n");
+	printf("| Freq | pwr_0 | pwr_1 | pwr_2 | pwr_3 |pwrx3_0|pwrx3_1|pwrx3_2|max_pwr|\n");
+	printf("|      | pcdac | pcdac | pcdac | pcdac | pcdac | pcdac | pcdac |       |\n");
+
+	for (i = 0; i < cal_piers; i++) {
+		char buf[16];
+
+		printf("|======|=======|=======|=======|=======|=======|=======|=======|=======|\n");
+		printf("| %4i |", chan_pcal_info[i].freq);
+		for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
+			printf(" %2i.%02i |", chan_pcal_info[i].pwr_x0[c] / 4,
+			       chan_pcal_info[i].pwr_x0[c] % 4);
+		}
+		for (c = 0; c < AR5K_EEPROM_N_XPD3_POINTS; c++) {
+			printf(" %2i.%02i |", chan_pcal_info[i].pwr_x3[c] / 4,
+			       chan_pcal_info[i].pwr_x3[c] % 4);
+		}
+		printf(" %2i.%02i |\n", chan_pcal_info[i].max_pwr / 4,
+		       chan_pcal_info[i].max_pwr % 4);
+
+		printf("|      |");
+		for (c = 0; c < AR5K_EEPROM_N_XPD0_POINTS; c++) {
+			snprintf(buf, sizeof(buf), "[%i]",
+				 chan_pcal_info[i].pcdac_x0[c]);
+			printf("%6s |", buf);
+		}
+		for (c = 0; c < AR5K_EEPROM_N_XPD3_POINTS; c++) {
+			snprintf(buf, sizeof(buf), "[%i]",
+				 chan_pcal_info[i].pcdac_x3[c]);
+			printf("%6s |", buf);
+		}
+		printf("       |\n");
+
+	}
+	printf("\\======================================================================/\n");
+}
+
+static void dump_rate_calinfo_for_mode(int mode, struct ath5k_eeprom_info *ee)
+{
+	int i;
+	struct ath5k_rate_pcal_info *rate_pcal_info;
+	u_int16_t rate_target_pwr_num;
+
+	switch (mode) {
+	case AR5K_EEPROM_MODE_11A:
+		rate_pcal_info = ee->ee_rate_tpwr_a;
+		rate_target_pwr_num = ee->ee_rate_target_pwr_num_a;
+		break;
+	case AR5K_EEPROM_MODE_11B:
+		rate_pcal_info = ee->ee_rate_tpwr_b;
+		rate_target_pwr_num = ee->ee_rate_target_pwr_num_b;
+		break;
+	case AR5K_EEPROM_MODE_11G:
+		rate_pcal_info = ee->ee_rate_tpwr_g;
+		rate_target_pwr_num = ee->ee_rate_target_pwr_num_g;
+		break;
+	default:
+		return;
+	}
+
+	printf("/============== Per rate power calibration ===========\\\n");
+	if (mode == AR5K_EEPROM_MODE_11B)
+		printf("| Freq |   1Mbit/s  | 2Mbit/s  | 5.5Mbit/s | 11Mbit/s |\n");
+	else
+		printf("| Freq | 6-24Mbit/s | 36Mbit/s |  48Mbit/s | 54Mbit/s |\n");
+
+	for (i = 0; i < rate_target_pwr_num; i++) {
+
+		printf("|======|============|==========|===========|==========|\n");
+		printf("| %4i |", rate_pcal_info[i].freq);
+		printf("    %2i.%02i   |",rate_pcal_info[i].target_power_6to24 /2,
+					rate_pcal_info[i].target_power_6to24 % 2);
+		printf("  %2i.%02i   |",rate_pcal_info[i].target_power_36 /2,
+					rate_pcal_info[i].target_power_36 % 2);
+		printf("   %2i.%02i   |",rate_pcal_info[i].target_power_48 /2,
+					rate_pcal_info[i].target_power_48 % 2);
+		printf("  %2i.%02i   |\n",rate_pcal_info[i].target_power_54 /2,
+					rate_pcal_info[i].target_power_54 % 2);
+	}
+	printf("\\=====================================================/\n");
+}
+
+static u_int32_t extend_tu(u_int32_t base_tu, u_int32_t val, u_int32_t mask)
+{
+	u_int32_t result;
+
+	result = (base_tu & ~mask) | (val & mask);
+	if ((base_tu & mask) > (val & mask))
+		result += mask + 1;
+	return result;
+}
+
+static void dump_timers_register(void *mem, u_int16_t mac_version)
+{
+#define AR5K_TIMER0_5210		0x802c	/* next TBTT */
+#define AR5K_TIMER0_5211		0x8028
+#define AR5K_TIMER0			(mac_version == AR5K_SREV_MAC_AR5210 ? \
+					AR5K_TIMER0_5210 : AR5K_TIMER0_5211)
+
+#define AR5K_TIMER1_5210		0x8030	/* next DMA beacon */
+#define AR5K_TIMER1_5211		0x802c
+#define AR5K_TIMER1			(mac_version == AR5K_SREV_MAC_AR5210 ? \
+					AR5K_TIMER1_5210 : AR5K_TIMER1_5211)
+
+#define AR5K_TIMER2_5210		0x8034	/* next SWBA interrupt */
+#define AR5K_TIMER2_5211		0x8030
+#define AR5K_TIMER2			(mac_version == AR5K_SREV_MAC_AR5210 ? \
+					AR5K_TIMER2_5210 : AR5K_TIMER2_5211)
+
+#define AR5K_TIMER3_5210		0x8038	/* next ATIM window */
+#define AR5K_TIMER3_5211		0x8034
+#define AR5K_TIMER3			(mac_version == AR5K_SREV_MAC_AR5210 ? \
+					AR5K_TIMER3_5210 : AR5K_TIMER3_5211)
+
+#define AR5K_TSF_L32_5210		0x806c	/* TSF (lower 32 bits) */
+#define AR5K_TSF_L32_5211		0x804c
+#define AR5K_TSF_L32			(mac_version == AR5K_SREV_MAC_AR5210 ? \
+					AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
+
+#define AR5K_TSF_U32_5210		0x8070
+#define AR5K_TSF_U32_5211		0x8050
+#define AR5K_TSF_U32			(mac_version == AR5K_SREV_MAC_AR5210 ? \
+					AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
+
+#define AR5K_BEACON_5210		0x8024
+#define AR5K_BEACON_5211		0x8020
+#define AR5K_BEACON			(mac_version == AR5K_SREV_MAC_AR5210 ? \
+					AR5K_BEACON_5210 : AR5K_BEACON_5211)
+
+#define AR5K_LAST_TSTP			0x8080
+
+	const int timer_mask = 0xffff;
+
+	u_int32_t timer0, timer1, timer2, timer3, now_tu;
+	u_int32_t timer0_tu, timer1_tu, timer2_tu, timer3_tu;
+	u_int64_t now_tsf;
+
+	timer0 = AR5K_REG_READ(AR5K_TIMER0);		/* 0x0000ffff */
+	timer1 = AR5K_REG_READ(AR5K_TIMER1_5211);	/* 0x0007ffff */
+	timer2 = AR5K_REG_READ(AR5K_TIMER2_5211);	/* 0x?1ffffff */
+	timer3 = AR5K_REG_READ(AR5K_TIMER3_5211);	/* 0x0000ffff */
+
+	now_tsf = ((u_int64_t)AR5K_REG_READ(AR5K_TSF_U32_5211) << 32)
+		| (u_int64_t)AR5K_REG_READ(AR5K_TSF_L32_5211);
+
+	now_tu = now_tsf >> 10;
+
+	timer0_tu = extend_tu(now_tu, timer0, 0xffff);
+	printf("TIMER0: 0x%08x, TBTT: %5u, TU: 0x%08x\n", timer0,
+	       timer0 & timer_mask, timer0_tu);
+	timer1_tu = extend_tu(now_tu, timer1 >> 3, 0x7ffff >> 3);
+	printf("TIMER1: 0x%08x, DMAb: %5u, TU: 0x%08x (%+d)\n", timer1,
+	       (timer1 >> 3) & timer_mask, timer1_tu, timer1_tu - timer0_tu);
+	timer2_tu = extend_tu(now_tu, timer2 >> 3, 0x1ffffff >> 3);
+	printf("TIMER2: 0x%08x, SWBA: %5u, TU: 0x%08x (%+d)\n", timer2,
+	       (timer2 >> 3) & timer_mask, timer2_tu, timer2_tu - timer0_tu);
+	timer3_tu = extend_tu(now_tu, timer3, 0xffff);
+	printf("TIMER3: 0x%08x, ATIM: %5u, TU: 0x%08x (%+d)\n", timer3,
+	       timer3 & timer_mask, timer3_tu, timer3_tu - timer0_tu);
+	printf("TSF: 0x%016llx, TSFTU: %5u, TU: 0x%08x\n",
+	       (unsigned long long)now_tsf, now_tu & timer_mask, now_tu);
+
+	printf("BEACON: 0x%08x\n", AR5K_REG_READ(AR5K_BEACON));
+	printf("LAST_TSTP: 0x%08x\n", AR5K_REG_READ(AR5K_LAST_TSTP));
+}
+
+#define AR5K_KEYTABLE_0_5210		0x9000
+#define AR5K_KEYTABLE_0_5211		0x8800
+#define AR5K_KEYTABLE_0			(mac_version == AR5K_SREV_MAC_AR5210 ? \
+					AR5K_KEYTABLE_0_5210 : \
+					AR5K_KEYTABLE_0_5211)
+
+#define AR5K_KEYTABLE(_n)		(AR5K_KEYTABLE_0_5211 + ((_n) << 5))
+#define AR5K_KEYTABLE_OFF(_n, x)	(AR5K_KEYTABLE(_n) + ((x) << 2))
+#define AR5K_KEYTABLE_VALID		0x00008000
+
+#define AR5K_KEYTABLE_SIZE_5210		64
+#define AR5K_KEYTABLE_SIZE_5211		128
+#define AR5K_KEYTABLE_SIZE		(mac_version == AR5K_SREV_MAC_AR5210 ? \
+					AR5K_KEYTABLE_SIZE_5210 : \
+					AR5K_KEYTABLE_SIZE_5211)
+
+static void keycache_dump(void *mem, u_int16_t mac_version)
+{
+	int i, keylen;
+	u_int32_t val0, val1, val2, val3, val4, keytype, ant, mac0, mac1;
+
+	/* dump all 128 entries */
+	printf("Dumping keycache entries...\n");
+	for (i = 0; i < AR5K_KEYTABLE_SIZE; i++) {
+		mac1 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 7));
+		if (mac1 & AR5K_KEYTABLE_VALID) {
+			val0    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 0));
+			val1    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 1));
+			val2    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 2));
+			val3    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 3));
+			val4    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 4));
+			keytype = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 5));
+			ant = keytype & 8;
+			keytype &= ~8;
+			switch (keytype) {
+			case 0: /* WEP40  */ keylen =  40 / 8; break;
+			case 1: /* WEP104 */ keylen = 104 / 8; break;
+			case 3: /* WEP128 */ keylen = 128 / 8; break;
+			case 4: /* TKIP   */ keylen = 128 / 8; break;
+			case 5: /* AES    */ keylen = 128 / 8; break;
+			case 6: /* CCM    */ keylen = 128 / 8; break;
+			default:             keylen = 0;       break;
+			}
+			mac0 = AR5K_REG_READ(AR5K_KEYTABLE_OFF(i, 6));
+
+			printf("[%3u] keytype %d [%s%s%s%s%s%s%s%s] mac %02x:%02x:%02x:%02x:%02x:%02x key:%08x-%08x-%08x-%08x-%08x\n",
+			       i,
+			       keytype,
+			       keytype == 0 ? "WEP40 " : "",
+			       keytype == 1 ? "WEP104" : "",
+			       keytype == 3 ? "WEP128" : "",
+			       keytype == 4 ? "TKIP  " : "",
+			       keytype == 5 ? "AES   " : "",
+			       keytype == 6 ? "CCM   " : "",
+			       keytype == 7 ? "NULL  " : "",
+			       ant     == 8 ? "+ANT"   : "",
+			       ((mac0 <<  1) & 0xff),
+			       ((mac0 >>  7) & 0xff),
+			       ((mac0 >> 15) & 0xff),
+			       ((mac0 >> 23) & 0xff),
+			       ((mac1 <<  1) & 0xff) | (mac0 >> 31),
+			       ((mac1 >>  7) & 0xff),
+			       val0, val1, val2, val3, val4);
+		}
+	}
+}
+
+/* copy key index (0) to key index (idx) */
+
+static void keycache_copy(void *mem, u_int16_t mac_version, int idx)
+{
+	u_int32_t val0, val1, val2, val3, val4, keytype, mac0, mac1;
+
+	printf("Copying keycache entry 0 to %d\n", idx);
+	if (idx < 0 || idx >= AR5K_KEYTABLE_SIZE) {
+		printf("invalid keycache index\n");
+		return;
+	}
+
+	val0    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 0));
+	val1    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 1));
+	val2    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 2));
+	val3    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 3));
+	val4    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 4));
+	keytype = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 5));
+	mac0    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 6));
+	mac1    = AR5K_REG_READ(AR5K_KEYTABLE_OFF(0, 7));
+
+	AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 0), val0);
+	AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 1), val1);
+	AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 2), val2);
+	AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 3), val3);
+	AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 4), val4);
+	AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 5), keytype);
+	AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 6), mac0);
+	AR5K_REG_WRITE(AR5K_KEYTABLE_OFF(idx, 7), mac1);
+}
+
+static void sta_id0_id1_dump(void *mem)
+{
+#define AR5K_STA_ID0			0x8000
+#define AR5K_STA_ID1			0x8004
+#define AR5K_STA_ID1_AP                 0x00010000
+#define AR5K_STA_ID1_ADHOC              0x00020000
+#define AR5K_STA_ID1_NO_KEYSRCH		0x00080000
+
+	u_int32_t sta_id0, sta_id1;
+
+	sta_id0 = AR5K_REG_READ(AR5K_STA_ID0);
+	sta_id1 = AR5K_REG_READ(AR5K_STA_ID1);
+	printf("STA_ID0: %02x:%02x:%02x:%02x:%02x:%02x\n",
+	       (sta_id0 >>  0) & 0xff,
+	       (sta_id0 >>  8) & 0xff,
+	       (sta_id0 >> 16) & 0xff,
+	       (sta_id0 >> 24) & 0xff,
+	       (sta_id1 >>  0) & 0xff,
+	       (sta_id1 >>  8) & 0xff);
+	printf("STA_ID1: 0x%08x, AP: %d, IBSS: %d, KeyCache Disable: %d\n",
+	       sta_id1,
+	       sta_id1 & AR5K_STA_ID1_AP ? 1 : 0,
+	       sta_id1 & AR5K_STA_ID1_ADHOC ? 1 : 0,
+	       sta_id1 & AR5K_STA_ID1_NO_KEYSRCH ? 1 : 0);
+}
+
 int
 CMD(athinfo)(int argc, char *argv[])
 {
-	u_int32_t dev_addr;
-	u_int16_t eeprom_header, srev, phy_rev_5ghz, phy_rev_2ghz;
-	u_int16_t eeprom_version, mac_version, regdomain, has_crystal, ee_magic;
-	u_int8_t error, has_a, has_b, has_g, has_rfkill, eeprom_size;
-	int byte_size = 0;
+	unsigned long long dev_addr;
+	u_int16_t srev, phy_rev_5ghz, phy_rev_2ghz, ee_magic;
+	u_int8_t mac_version, mac_revision;
+	u_int8_t error, eeprom_size, dev_type, eemap;
+	struct ath5k_eeprom_info *ee;
+	unsigned int byte_size = 0;
 	void *mem;
 	int fd;
-	int i, anr = 1;
+	unsigned int i;
+	int anr = 1;
 	int do_write = 0;	/* default: read only */
 	int do_dump = 0;
+	int reg_read = 0;
+	int reg_write = 0;
+	unsigned int reg_write_val = 0;
+	unsigned int timer_count = 1;
+	int do_keycache_dump = 0;
+	int keycache_copy_idx = 0;
 
 	struct {
 		int valid;
@@ -759,7 +1986,7 @@ CMD(athinfo)(int argc, char *argv[])
 	} gpio_set[AR5K_NUM_GPIO];
 	int nr_gpio_set = 0;
 
-	for (i = 0; i < sizeof(gpio_set) / sizeof(gpio_set[0]); i++)
+	for (i = 0; i < ARRAY_SIZE(gpio_set); i++)
 		gpio_set[i].valid = 0;
 
 	if (argc < 2) {
@@ -769,6 +1996,15 @@ CMD(athinfo)(int argc, char *argv[])
 
 	while (anr < argc && argv[anr][0] == '-') {
 		switch (argv[anr][1]) {
+		case 't':
+			if (++anr < argc) {
+				timer_count = atoi(argv[anr]);
+				printf("timer_count:%d\n", timer_count);
+			} else {
+				usage(argv[0]);
+				return 0;
+			}
+			break;
 		case 'w':
 			do_write = 1;
 			break;
@@ -777,7 +2013,7 @@ CMD(athinfo)(int argc, char *argv[])
 			if (strlen(argv[anr]) != 3 || argv[anr][1] != ':' ||
 			    argv[anr][0] < '0' || argv[anr][0] > '5' ||
 			    (argv[anr][2] != '0' && argv[anr][2] != '1')) {
-				err("invalid gpio spec. %s", argv[anr]);
+				err("invalid GPIO spec. %s", argv[anr]);
 				return 2;
 			}
 			gpio_set[argv[anr][0] - '0'].valid = 1;
@@ -797,6 +2033,25 @@ CMD(athinfo)(int argc, char *argv[])
 			do_dump = 1;
 			break;
 
+		case 'R':
+			anr++;
+			reg_read = strtoul(argv[anr], NULL, 16);
+			break;
+
+		case 'W':
+			anr++;
+			reg_write = strtoul(argv[anr++], NULL, 16);
+			reg_write_val = strtoul(argv[anr], NULL, 16);
+			break;
+
+		case 'k':
+			do_keycache_dump = 1;
+			break;
+
+		case 'K':
+			keycache_copy_idx = atoi(argv[++anr]);
+			break;
+
 		case 'h':
 			usage(argv[0]);
 			return 0;
@@ -805,10 +2060,10 @@ CMD(athinfo)(int argc, char *argv[])
 		default:
 			err("unknown option %s", argv[anr]);
 			return 2;
-		}		/* switch (argv[anr][1]) */
+		}
 
 		anr++;
-	}			/* while (anr < argc && ...) */
+	}
 
 	if (anr >= argc) {
 		err("missing device address");
@@ -816,7 +2071,7 @@ CMD(athinfo)(int argc, char *argv[])
 		return 3;
 	}
 
-	dev_addr = strtoul(argv[anr], NULL, 16);
+	dev_addr = strtoull(argv[anr], NULL, 16);
 
 	fd = open("/dev/mem", O_RDWR);
 	if (fd < 0) {
@@ -828,7 +2083,7 @@ CMD(athinfo)(int argc, char *argv[])
 		   MAP_SHARED | MAP_FILE, fd, dev_addr);
 
 	if (mem == MAP_FAILED) {
-		printf("Mmap of device at 0x%08X for 0x%X bytes failed - "
+		printf("mmap of device at 0x%08llX for 0x%X bytes failed - "
 		       "%s\n", dev_addr, AR5K_PCI_MEM_SIZE, strerror(errno));
 		return -3;
 	}
@@ -856,10 +2111,31 @@ CMD(athinfo)(int argc, char *argv[])
 	AR5K_REG_DISABLE_BITS(AR5K_PCICFG, AR5K_PCICFG_SPWR_DN);
 	usleep(500);
 
+	if (reg_read) {
+		printf("READ %04x = %08x\n", reg_read, AR5K_REG_READ(reg_read));
+		return 0;
+	}
+
+	if (reg_write) {
+		printf("WRITE %04x = %08x\n", reg_write, reg_write_val);
+		AR5K_REG_WRITE(reg_write, reg_write_val);
+		return 0;
+	}
+
 	srev = AR5K_REG_READ(AR5K_SREV);
-	mac_version = AR5K_REG_MS(srev, AR5K_SREV_VER) << 4;
+	if (srev >= 0x0100) {
+		printf("MAC revision 0x%04x is not supported!\n", srev);
+		return -1;
+	}
+	mac_version = srev & AR5K_SREV_VER;
+	mac_revision = srev & AR5K_SREV_REV;
 
-	/* Verify eeprom magic value first */
+	printf(" -==Device Information==-\n");
+
+	printf("MAC Revision: %-5s (0x%02x)\n",
+	       ath5k_hw_get_mac_name(mac_revision), mac_revision);
+
+	/* Verify EEPROM magic value first */
 	error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_MAGIC, &ee_magic,
 				     mac_version);
 
@@ -872,157 +2148,114 @@ CMD(athinfo)(int argc, char *argv[])
 		printf("Warning: Invalid EEPROM Magic number!\n");
 	}
 
-	error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_HDR, &eeprom_header,
-				     mac_version);
-
-	if (error) {
-		printf("Unable to read EEPROM Header!\n");
-		return -1;
-	}
-
-	error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_VERSION, &eeprom_version,
-				     mac_version);
-
-	if (error) {
-		printf("Unable to read EEPROM version!\n");
+	ee = calloc(sizeof(struct ath5k_eeprom_info), 1);
+	if (!ee) {
+		printf("Cannot allocate memory for EEPROM information\n");
 		return -1;
 	}
 
-	error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_REG_DOMAIN, &regdomain,
-				     mac_version);
-
-	if (error) {
-		printf("Unable to read Regdomain!\n");
+	if (ath5k_eeprom_init(mem, mac_version, ee)) {
+		printf("EEPROM init failed\n");
 		return -1;
 	}
 
-	if (eeprom_version >= 0x4000) {
-		error = ath5k_hw_eeprom_read(mem, AR5K_EEPROM_MISC0,
-					     &has_crystal, mac_version);
-
-		if (error) {
-			printf("Unable to read EEPROM Misc data!\n");
-			return -1;
-		}
-
-		has_crystal = AR5K_EEPROM_HAS32KHZCRYSTAL(has_crystal);
-	} else {
-		has_crystal = 2;
-	}
-
 	eeprom_size = AR5K_REG_MS(AR5K_REG_READ(AR5K_PCICFG),
 				  AR5K_PCICFG_EESIZE);
 
-	has_a = AR5K_EEPROM_HDR_11A(eeprom_header);
-	has_b = AR5K_EEPROM_HDR_11B(eeprom_header);
-	has_g = AR5K_EEPROM_HDR_11G(eeprom_header);
-	has_rfkill = AR5K_EEPROM_HDR_RFKILL(eeprom_header);
+	dev_type = AR5K_EEPROM_HDR_DEVICE(ee->ee_header);
+	eemap = AR5K_EEPROM_EEMAP(ee->ee_misc0);
 
-	if (has_a)
+	/* 1 = ?? 2 = ?? 3 = card 4 = wmac */
+	printf("Device type:  %1i\n", dev_type);
+
+	if (AR5K_EEPROM_HDR_11A(ee->ee_header))
 		phy_rev_5ghz = ath5k_hw_radio_revision(mac_version, mem, 1);
 	else
 		phy_rev_5ghz = 0;
 
-	if (has_b)
+	if (AR5K_EEPROM_HDR_11B(ee->ee_header))
 		phy_rev_2ghz = ath5k_hw_radio_revision(mac_version, mem, 0);
 	else
 		phy_rev_2ghz = 0;
 
-	printf(" -==Device Information==-\n");
-
-	printf("MAC Version:  %-5s (0x%02x)\n",
-	       ath5k_hw_get_part_name(AR5K_VERSION_VER, mac_version),
-	       mac_version);
-
-	printf("MAC Revision: %-5s (0x%02x)\n",
-	       ath5k_hw_get_part_name(AR5K_VERSION_VER, srev), srev);
-
-	/* Single-chip PHY with a/b/g support */
-	if (has_b && !phy_rev_2ghz) {
-		printf("PHY Revision: %-5s (0x%02x)\n",
-		       ath5k_hw_get_part_name(AR5K_VERSION_RAD, phy_rev_5ghz),
-		       phy_rev_5ghz);
-		phy_rev_5ghz = 0;
-	}
-
-	/* Single-chip PHY with b/g support */
-	if (!has_a) {
-		printf("PHY Revision: %-5s (0x%02x)\n",
-		       ath5k_hw_get_part_name(AR5K_VERSION_RAD, phy_rev_2ghz),
-		       phy_rev_2ghz);
-		phy_rev_2ghz = 0;
-	}
-
-	/* Different chip for 5Ghz and 2Ghz */
 	if (phy_rev_5ghz) {
-		printf("5Ghz PHY Revision: %-5s (0x%2x)\n",
-		       ath5k_hw_get_part_name(AR5K_VERSION_RAD, phy_rev_5ghz),
-		       phy_rev_5ghz);
+		printf("5GHz PHY Revision: %-5s (0x%02x)\n",
+		       ath5k_hw_get_phy_name(phy_rev_5ghz), phy_rev_5ghz);
 	}
 	if (phy_rev_2ghz) {
-		printf("2Ghz PHY Revision: %-5s (0x%2x)\n",
-		       ath5k_hw_get_part_name(AR5K_VERSION_RAD, phy_rev_2ghz),
-		       phy_rev_2ghz);
+		printf("2GHz PHY Revision: %-5s (0x%02x)\n",
+		       ath5k_hw_get_phy_name(phy_rev_2ghz), phy_rev_2ghz);
 	}
 
-	printf(" -==EEPROM Information==-\n");
-
-	printf("EEPROM Version:     %x.%x\n",
-	       (eeprom_version & 0xF000) >> 12, eeprom_version & 0xFFF);
+	printf("\n");
+	printf("/============== EEPROM Information =============\\\n");
+	printf("| EEPROM Version:   %1x.%1x |",
+	       (ee->ee_version & 0xF000) >> 12, ee->ee_version & 0xFFF);
 
-	printf("EEPROM Size: ");
+	printf(" EEPROM Size: ");
 
 	if (eeprom_size == 0) {
-		printf("       4K\n");
-		byte_size = 4096;
+		printf("  4 kbit |\n");
+		byte_size = 4096 / 8;
 	} else if (eeprom_size == 1) {
-		printf("       8K\n");
-		byte_size = 8192;
+		printf("  8 kbit |\n");
+		byte_size = 8192 / 8;
 	} else if (eeprom_size == 2) {
-		printf("       16K\n");
-		byte_size = 16384;
+		printf(" 16 kbit |\n");
+		byte_size = 16384 / 8;
 	} else
-		printf("       ??\n");
+		printf(" unknown |\n");
 
-	printf("Regulatory Domain:  0x%X\n", regdomain);
-
-	printf(" -==== Capabilities ====-\n");
-
-	printf("|  802.11a Support: ");
-	if (has_a)
-		printf("yes  |\n");
-	else
-		printf("no   |\n");
-
-	printf("|  802.11b Support: ");
-	if (has_b)
-		printf("yes  |\n");
-	else
-		printf("no   |\n");
+	printf("| EEMAP:              %i |", eemap);
 
-	printf("|  802.11g Support: ");
-	if (has_g)
-		printf("yes  |\n");
-	else
-		printf("no   |\n");
+	printf(" Reg. Domain:     0x%02X |\n", ee->ee_regdomain);
 
-	printf("|  RFKill  Support: ");
-	if (has_rfkill)
-		printf("yes  |\n");
-	else
-		printf("no   |\n");
+	dump_capabilities(ee);
+	printf("\n");
 
-	if (has_crystal != 2) {
-		printf("|  32KHz   Crystal: ");
-		if (has_crystal)
-			printf("yes  |\n");
-		else
-			printf("no   |\n");
+	printf("/=========================================================\\\n");
+	printf("|          Calibration data common for all modes          |\n");
+	printf("|=========================================================|\n");
+	printf("|          CCK/OFDM gain delta:            %2i             |\n", ee->ee_cck_ofdm_gain_delta);
+	printf("|          CCK/OFDM power delta:           %2i             |\n", ee->ee_cck_ofdm_power_delta);
+	printf("|          Scaled CCK delta:               %2i             |\n", ee->ee_scaled_cck_delta);
+	printf("|          2GHz Antenna gain:              %2i             |\n", AR5K_EEPROM_ANT_GAIN_2GHZ(ee->ee_ant_gain));
+	printf("|          5GHz Antenna gain:              %2i             |\n", AR5K_EEPROM_ANT_GAIN_5GHZ(ee->ee_ant_gain));
+	printf("|          Turbo 2W maximum dBm:           %2i             |\n", AR5K_EEPROM_HDR_T_5GHZ_DBM(ee->ee_header));
+	printf("|          Target power start:          0x%03x             |\n", AR5K_EEPROM_TARGET_PWRSTART(ee->ee_misc1));
+	printf("|          EAR Start:                   0x%03x             |\n", AR5K_EEPROM_EARSTART(ee->ee_misc0));
+	printf("\\=========================================================/\n");
+
+	printf("\n");
+	if (AR5K_EEPROM_HDR_11A(ee->ee_header)) {
+		printf("/=========================================================\\\n");
+		printf("|          Calibration data for 802.11a operation         |\n");
+		dump_calinfo_for_mode(AR5K_EEPROM_MODE_11A, ee);
+		dump_rate_calinfo_for_mode(AR5K_EEPROM_MODE_11A, ee);
+		dump_power_calinfo_for_mode(AR5K_EEPROM_MODE_11A, ee);
+		printf("\n");
+	}
+
+	if (AR5K_EEPROM_HDR_11B(ee->ee_header)) {
+		printf("/=========================================================\\\n");
+		printf("|          Calibration data for 802.11b operation         |\n");
+		dump_calinfo_for_mode(AR5K_EEPROM_MODE_11B, ee);
+		dump_rate_calinfo_for_mode(AR5K_EEPROM_MODE_11B, ee);
+		dump_power_calinfo_for_mode(AR5K_EEPROM_MODE_11B, ee);
+		printf("\n");
+	}
+
+	if (AR5K_EEPROM_HDR_11G(ee->ee_header)) {
+		printf("/=========================================================\\\n");
+		printf("|          Calibration data for 802.11g operation         |\n");
+		dump_calinfo_for_mode(AR5K_EEPROM_MODE_11G, ee);
+		dump_rate_calinfo_for_mode(AR5K_EEPROM_MODE_11G, ee);
+		dump_power_calinfo_for_mode(AR5K_EEPROM_MODE_11G, ee);
+		printf("\n");
 	}
-	printf(" ========================\n");
 
 	/* print current GPIO settings */
-	printf("GPIO registers: CR %08x DO %08x DI %08x\n",
+	printf("GPIO registers: CR 0x%08x, DO 0x%08x, DI 0x%08x\n",
 	       AR5K_REG_READ(AR5K_GPIOCR), AR5K_REG_READ(AR5K_GPIODO),
 	       AR5K_REG_READ(AR5K_GPIODI));
 
@@ -1030,18 +2263,18 @@ CMD(athinfo)(int argc, char *argv[])
 		u_int16_t data;
 		FILE *dumpfile = fopen("ath-eeprom-dump.bin", "w");
 
-		printf("\nEEPROM dump (%d byte)\n", byte_size);
+		printf("\nEEPROM dump (%d bytes)\n", byte_size);
 		printf("==============================================");
-		for (i = 1; i <= (byte_size / 2); i++) {
+		for (i = 0; i < byte_size / 2; i++) {
 			error =
 			    ath5k_hw_eeprom_read(mem, i, &data, mac_version);
 			if (error) {
 				printf("\nUnable to read at %04x\n", i);
 				continue;
 			}
-			if (!((i - 1) % 8))
-				printf("\n%04x:  ", i);
-			printf("%04x ", data);
+			if (!(i % 8))
+				printf("\n%04x: ", i);
+			printf(" %04x", data);
 			fwrite(&data, 2, 1, dumpfile);
 		}
 		printf("\n==============================================\n");
@@ -1054,18 +2287,18 @@ CMD(athinfo)(int argc, char *argv[])
 		u_int32_t old_cr = rcr, old_do = rdo;
 		int rc;
 
-		if (mac_version >= AR5K_SREV_VER_AR5213 && !nr_gpio_set) {
-			dbg("new MAC %x (>= AR5213) set gpio4 to low",
+		if (mac_version >= AR5K_SREV_MAC_AR5213 && !nr_gpio_set) {
+			dbg("new MAC %x (>= AR5213) set GPIO4 to low",
 			    mac_version);
 			gpio_set[4].valid = 1;
 			gpio_set[4].value = 0;
 		}
 
-		/* set gpios */
+		/* set GPIOs */
 		dbg("old GPIO CR %08x DO %08x DI %08x",
 		    rcr, rdo, AR5K_REG_READ(AR5K_GPIODI));
 
-		for (i = 0; i < sizeof(gpio_set) / sizeof(gpio_set[0]); i++) {
+		for (i = 0; i < ARRAY_SIZE(gpio_set); i++) {
 			if (gpio_set[i].valid) {
 				rcr |= AR5K_GPIOCR_OUT(i);	/* we use mode 3 */
 				rcr &= ~AR5K_GPIOCR_INT_SEL(i);
@@ -1111,5 +2344,17 @@ CMD(athinfo)(int argc, char *argv[])
 
 		return rc;
 	}
+
+	sta_id0_id1_dump(mem);
+
+	for (i = 0; i < timer_count; i++)
+		dump_timers_register(mem, mac_version);
+
+	if (do_keycache_dump)
+		keycache_dump(mem, mac_version);
+
+	if (keycache_copy_idx > 0)
+		keycache_copy(mem, mac_version, keycache_copy_idx);
+
 	return 0;
 }