qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-07 20:54:04 +02:00
Code
76dfd53de0
openwrt-xburst/target/linux/x86/net5501/target.mk

38 lines
1.3 KiB
Makefile
Raw Normal View History

[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
LINUX_VERSION:=3.2.1
[x86] add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 15:36:55 +03:00
BOARDNAME:=Soekris net5501
[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
FEATURES:=squashfs jffs2 ext4 pci usb gpio
DEFAULT_PACKAGES += kmod-crypto-hw-geode kmod-crypto-ocf \
kmod-gpio-cs5535-new kmod-gpio-nsc \
kmod-wdt-geode kmod-cs5535-clockevt kmod-cs5535-mfgpt \
kmod-cs5536 \
kmod-hwmon-core kmod-hwmon-pc87360 kmod-gpio-pc8736x \
kmod-via-rhine kmod-solos-pci \
[x86] add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 15:36:55 +03:00
kmod-i2c-core kmod-i2c-gpio \
kmod-i2c-algo-bit kmod-i2c-algo-pca kmod-i2c-algo-pcf \
[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
kmod-i2c-scx200-acb \
kmod-usb-core kmod-usb2 kmod-usb-ohci \
kmod-cfg80211 kmod-mac80211 \
kmod-mppe kmod-pppoe kmod-pppoa kmod-pppo2ltp \
kmod-ath kmod-ath5k kmod-ath9k \
kmod-leds-gpio kmod-input-gpio-keys-polled \
kmod-button-hotplug \
kmod-ledtrig-heartbeat kmod-ledtrig-gpio \
kmod-ledtrig-netdev kmod-ledtrig-netfilter \
kmod-cpu-msr \
soloscli linux-atm br2684ctl bridge ppp ppp-mod-pppoa \
pppdump pppstats \
libopenssl ocf-crypto-headers zlib hwclock hostapd
CS5535_MASK:=0x01000040
[x86] Use -pipe for net5501 and geos CFLAGS, same as all of the other platforms Makes the builds run slightly faster on multicores. Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23495 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-10-17 15:42:06 +03:00
CFLAGS += -Os -pipe -march=k6-2 -fno-align-functions -fno-align-loops -fno-align-jumps \
[x86] add net5501 support This patch brings up the net5501 platform. Note that the x86/ target included support for all x86/ class processors. That's not technically correct. This should be constrained only to the "generic" subtarget. Every x86-class target that isn't generic should be able to select only the optimizations/capabilities applicable to that architectural variant. It's also assumed that all x86 processors have keyboard & mouse ports, ISA, DMI, ACPI... the embedded ones typically don't. Again, moving that to the generic subtarget. Fortunately, this was a fairly benign tweak. The net5501 board includes the following logic: Geode/LX processor CS5535 super-I/O chip PC87360 sensor chip Via Rhine Ethernet controllers Via Sata controllers USB, LEDS, I2C Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@20794 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-04-11 15:36:55 +03:00
-fno-align-labels
define Target/Description
Build firmware images for Soekris net5501 board
endef
[PATCH] net5501: correct net5501 h/w configuration Bump to version 3.2. Simplify and correct kernel config (based on x86/config-3.2). Designate eth0 as wan interface, and bridge eth1/eth2/eth3. Add heartbeat LED trigger. Use correct CS5535 GPIO driver. Use correct USB drivers (OHCI not UHCI). Add MSR and HW clock support. Add GPIO mask definition. Add correct SATA drivers. Add LED triggers. [Patch from Philipp Prindeville, via http://patchwork.openwrt.org/patch/1802/] git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29994 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-02 20:41:10 +02:00
define KernelPackage/gpio-cs5535-new/install
sed -i -r -e 's/$$$$$$$$/ mask=$(CS5535_MASK)/' $(1)/etc/modules.d/??-gpio-cs5535-new
endef
Copy Permalink