openwrt-xburst/target/linux/at91-2.6/patches/009-fdl-uartinit.patch

--- linux-2.6.21.1.orig/arch/arm/mach-at91/at91rm9200_devices.c	2007-05-28 12:22:29.000000000 +0200
+++ linux-2.6.21.1/arch/arm/mach-at91/at91rm9200_devices.c	2007-05-28 16:44:36.000000000 +0200
@@ -618,7 +618,6 @@
 
 
 #if defined(CONFIG_NEW_LEDS)
-
 static struct platform_device at91_leds = {
 	.name		= "at91_leds",
 	.id		= -1,
@@ -724,6 +723,10 @@
 	 *  We need to drive the pin manually.  Default is off (RTS is active low).
 	 */
 	at91_set_gpio_output(AT91_PIN_PA21, 1);
+	at91_set_gpio_output(AT91_PIN_PB6, 1);  /* DTR0 */
+	at91_set_gpio_output(AT91_PIN_PB7, 1);  /* RI0 */
+	at91_set_gpio_input(AT91_PIN_PA19, 1);  /* DCD0 */
+	at91_set_deglitch(AT91_PIN_PA19, 1);
 }
 
 static struct resource uart1_resources[] = {
@@ -835,6 +838,12 @@
 {
 	at91_set_B_periph(AT91_PIN_PA5, 1);		/* TXD3 */
 	at91_set_B_periph(AT91_PIN_PA6, 0);		/* RXD3 */
+	at91_set_B_periph(AT91_PIN_PB0, 0);   /* RTS3 */
+	at91_set_B_periph(AT91_PIN_PB1, 0);   /* CTS3 */
+	at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
+	at91_set_gpio_output(AT91_PIN_PB2, 1);  /* RI0 */
+	at91_set_gpio_input(AT91_PIN_PA24, 1);  /* DCD0 */
+	at91_set_deglitch(AT91_PIN_PA24, 1);
 }
 
 struct platform_device *at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */