openwrt-xburst/target/linux/generic/patches-3.0/025-bcma_backport.patch

--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -13,6 +13,11 @@ config BCMA
 	  Bus driver for Broadcom specific Advanced Microcontroller Bus
 	  Architecture.
 
+# Support for Block-I/O. SELECT this from the driver that needs it.
+config BCMA_BLOCKIO
+	bool
+	depends on BCMA
+
 config BCMA_HOST_PCI_POSSIBLE
 	bool
 	depends on BCMA && PCI = y
@@ -22,6 +27,25 @@ config BCMA_HOST_PCI
 	bool "Support for BCMA on PCI-host bus"
 	depends on BCMA_HOST_PCI_POSSIBLE
 
+config BCMA_DRIVER_PCI_HOSTMODE
+	bool "Driver for PCI core working in hostmode"
+	depends on BCMA && MIPS
+	help
+	  PCI core hostmode operation (external PCI bus).
+
+config BCMA_HOST_SOC
+	bool
+	depends on BCMA_DRIVER_MIPS
+
+config BCMA_DRIVER_MIPS
+	bool "BCMA Broadcom MIPS core driver"
+	depends on BCMA && MIPS
+	help
+	  Driver for the Broadcom MIPS core attached to Broadcom specific
+	  Advanced Microcontroller Bus.
+
+	  If unsure, say N
+
 config BCMA_DEBUG
 	bool "BCMA debugging"
 	depends on BCMA
--- a/drivers/bcma/Makefile
+++ b/drivers/bcma/Makefile
@@ -1,7 +1,10 @@
-bcma-y					+= main.o scan.o core.o
+bcma-y					+= main.o scan.o core.o sprom.o
 bcma-y					+= driver_chipcommon.o driver_chipcommon_pmu.o
 bcma-y					+= driver_pci.o
+bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)	+= driver_pci_host.o
+bcma-$(CONFIG_BCMA_DRIVER_MIPS)		+= driver_mips.o
 bcma-$(CONFIG_BCMA_HOST_PCI)		+= host_pci.o
+bcma-$(CONFIG_BCMA_HOST_SOC)		+= host_soc.o
 obj-$(CONFIG_BCMA)			+= bcma.o
 
 ccflags-$(CONFIG_BCMA_DEBUG)		:= -DDEBUG
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -13,11 +13,33 @@
 struct bcma_bus;
 
 /* main.c */
-extern int bcma_bus_register(struct bcma_bus *bus);
-extern void bcma_bus_unregister(struct bcma_bus *bus);
+int bcma_bus_register(struct bcma_bus *bus);
+void bcma_bus_unregister(struct bcma_bus *bus);
+int __init bcma_bus_early_register(struct bcma_bus *bus,
+				   struct bcma_device *core_cc,
+				   struct bcma_device *core_mips);
+#ifdef CONFIG_PM
+int bcma_bus_resume(struct bcma_bus *bus);
+#endif
 
 /* scan.c */
 int bcma_bus_scan(struct bcma_bus *bus);
+int __init bcma_bus_scan_early(struct bcma_bus *bus,
+			       struct bcma_device_id *match,
+			       struct bcma_device *core);
+void bcma_init_bus(struct bcma_bus *bus);
+
+/* sprom.c */
+int bcma_sprom_get(struct bcma_bus *bus);
+
+/* driver_chipcommon.c */
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc);
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+
+/* driver_chipcommon_pmu.c */
+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
+u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
 
 #ifdef CONFIG_BCMA_HOST_PCI
 /* host_pci.c */
@@ -25,4 +47,8 @@ extern int __init bcma_host_pci_init(voi
 extern void __exit bcma_host_pci_exit(void);
 #endif /* CONFIG_BCMA_HOST_PCI */
 
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
+#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+
 #endif
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -19,7 +19,7 @@ bool bcma_core_is_enabled(struct bcma_de
 }
 EXPORT_SYMBOL_GPL(bcma_core_is_enabled);
 
-static void bcma_core_disable(struct bcma_device *core, u32 flags)
+void bcma_core_disable(struct bcma_device *core, u32 flags)
 {
 	if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET)
 		return;
@@ -31,6 +31,7 @@ static void bcma_core_disable(struct bcm
 	bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET);
 	udelay(1);
 }
+EXPORT_SYMBOL_GPL(bcma_core_disable);
 
 int bcma_core_enable(struct bcma_device *core, u32 flags)
 {
@@ -49,3 +50,77 @@ int bcma_core_enable(struct bcma_device
 	return 0;
 }
 EXPORT_SYMBOL_GPL(bcma_core_enable);
+
+void bcma_core_set_clockmode(struct bcma_device *core,
+			     enum bcma_clkmode clkmode)
+{
+	u16 i;
+
+	WARN_ON(core->id.id != BCMA_CORE_CHIPCOMMON &&
+		core->id.id != BCMA_CORE_PCIE &&
+		core->id.id != BCMA_CORE_80211);
+
+	switch (clkmode) {
+	case BCMA_CLKMODE_FAST:
+		bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
+		udelay(64);
+		for (i = 0; i < 1500; i++) {
+			if (bcma_read32(core, BCMA_CLKCTLST) &
+			    BCMA_CLKCTLST_HAVEHT) {
+				i = 0;
+				break;
+			}
+			udelay(10);
+		}
+		if (i)
+			pr_err("HT force timeout\n");
+		break;
+	case BCMA_CLKMODE_DYNAMIC:
+		pr_warn("Dynamic clockmode not supported yet!\n");
+		break;
+	}
+}
+EXPORT_SYMBOL_GPL(bcma_core_set_clockmode);
+
+void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status, bool on)
+{
+	u16 i;
+
+	WARN_ON(req & ~BCMA_CLKCTLST_EXTRESREQ);
+	WARN_ON(status & ~BCMA_CLKCTLST_EXTRESST);
+
+	if (on) {
+		bcma_set32(core, BCMA_CLKCTLST, req);
+		for (i = 0; i < 10000; i++) {
+			if ((bcma_read32(core, BCMA_CLKCTLST) & status) ==
+			    status) {
+				i = 0;
+				break;
+			}
+			udelay(10);
+		}
+		if (i)
+			pr_err("PLL enable timeout\n");
+	} else {
+		pr_warn("Disabling PLL not supported yet!\n");
+	}
+}
+EXPORT_SYMBOL_GPL(bcma_core_pll_ctl);
+
+u32 bcma_core_dma_translation(struct bcma_device *core)
+{
+	switch (core->bus->hosttype) {
+	case BCMA_HOSTTYPE_SOC:
+		return 0;
+	case BCMA_HOSTTYPE_PCI:
+		if (bcma_aread32(core, BCMA_IOST) & BCMA_IOST_DMA64)
+			return BCMA_DMA_TRANSLATION_DMA64_CMT;
+		else
+			return BCMA_DMA_TRANSLATION_DMA32_CMT;
+	default:
+		pr_err("DMA translation unknown for host %d\n",
+		       core->bus->hosttype);
+	}
+	return BCMA_DMA_TRANSLATION_NONE;
+}
+EXPORT_SYMBOL(bcma_core_dma_translation);
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -3,7 +3,7 @@
  * ChipCommon core driver
  *
  * Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -23,6 +23,12 @@ static inline u32 bcma_cc_write32_masked
 
 void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
 {
+	u32 leddc_on = 10;
+	u32 leddc_off = 90;
+
+	if (cc->setup_done)
+		return;
+
 	if (cc->core->id.rev >= 11)
 		cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
 	cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP);
@@ -38,6 +44,19 @@ void bcma_core_chipcommon_init(struct bc
 		bcma_pmu_init(cc);
 	if (cc->capabilities & BCMA_CC_CAP_PCTL)
 		pr_err("Power control not implemented!\n");
+
+	if (cc->core->id.rev >= 16) {
+		if (cc->core->bus->sprom.leddc_on_time &&
+		    cc->core->bus->sprom.leddc_off_time) {
+			leddc_on = cc->core->bus->sprom.leddc_on_time;
+			leddc_off = cc->core->bus->sprom.leddc_off_time;
+		}
+		bcma_cc_write32(cc, BCMA_CC_GPIOTIMER,
+			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
+			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
+	}
+
+	cc->setup_done = true;
 }
 
 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
@@ -87,3 +106,51 @@ u32 bcma_chipco_gpio_polarity(struct bcm
 {
 	return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value);
 }
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+void bcma_chipco_serial_init(struct bcma_drv_cc *cc)
+{
+	unsigned int irq;
+	u32 baud_base;
+	u32 i;
+	unsigned int ccrev = cc->core->id.rev;
+	struct bcma_serial_port *ports = cc->serial_ports;
+
+	if (ccrev >= 11 && ccrev != 15) {
+		/* Fixed ALP clock */
+		baud_base = bcma_pmu_alp_clock(cc);
+		if (ccrev >= 21) {
+			/* Turn off UART clock before switching clocksource. */
+			bcma_cc_write32(cc, BCMA_CC_CORECTL,
+				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
+				       & ~BCMA_CC_CORECTL_UARTCLKEN);
+		}
+		/* Set the override bit so we don't divide it */
+		bcma_cc_write32(cc, BCMA_CC_CORECTL,
+			       bcma_cc_read32(cc, BCMA_CC_CORECTL)
+			       | BCMA_CC_CORECTL_UARTCLK0);
+		if (ccrev >= 21) {
+			/* Re-enable the UART clock. */
+			bcma_cc_write32(cc, BCMA_CC_CORECTL,
+				       bcma_cc_read32(cc, BCMA_CC_CORECTL)
+				       | BCMA_CC_CORECTL_UARTCLKEN);
+		}
+	} else {
+		pr_err("serial not supported on this device ccrev: 0x%x\n",
+		       ccrev);
+		return;
+	}
+
+	irq = bcma_core_mips_irq(cc->core);
+
+	/* Determine the registers of the UARTs */
+	cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+	for (i = 0; i < cc->nr_serial_ports; i++) {
+		ports[i].regs = cc->core->io_addr + BCMA_CC_UART0_DATA +
+				(i * 256);
+		ports[i].irq = irq;
+		ports[i].baud_base = baud_base;
+		ports[i].reg_shift = 0;
+	}
+}
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -2,7 +2,7 @@
  * Broadcom specific AMBA
  * ChipCommon Power Management Unit driver
  *
- * Copyright 2009, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2009, Michael Buesch <m@bues.ch>
  * Copyright 2007, Broadcom Corporation
  *
  * Licensed under the GNU/GPL. See COPYING for details.
@@ -11,20 +11,47 @@
 #include "bcma_private.h"
 #include <linux/bcma/bcma.h>
 
-static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
-					u32 offset, u32 mask, u32 set)
+static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
 {
-	u32 value;
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
+}
 
-	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
+void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
+{
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_pll_write);
+
+void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
+			     u32 set)
+{
+	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
+	bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset);
+
+void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+				 u32 offset, u32 mask, u32 set)
+{
 	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
 	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
-	value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
-	value &= mask;
-	value |= set;
-	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value);
-	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA);
+	bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set);
+}
+EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset);
+
+void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
+				u32 set)
+{
+	bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset);
+	bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR);
+	bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set);
 }
+EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);
 
 static void bcma_pmu_pll_init(struct bcma_drv_cc *cc)
 {
@@ -53,6 +80,7 @@ static void bcma_pmu_resources_init(stru
 		max_msk = 0xFFFF;
 		break;
 	case 43224:
+	case 43225:
 		break;
 	default:
 		pr_err("PMU resource config unknown for device 0x%04X\n",
@@ -74,6 +102,7 @@ void bcma_pmu_swreg_init(struct bcma_drv
 	case 0x4313:
 	case 0x4331:
 	case 43224:
+	case 43225:
 		break;
 	default:
 		pr_err("PMU switch/regulators init unknown for device "
@@ -81,6 +110,24 @@ void bcma_pmu_swreg_init(struct bcma_drv
 	}
 }
 
+/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable)
+{
+	struct bcma_bus *bus = cc->core->bus;
+	u32 val;
+
+	val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL);
+	if (enable) {
+		val |= BCMA_CHIPCTL_4331_EXTPA_EN;
+		if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
+			val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
+	} else {
+		val &= ~BCMA_CHIPCTL_4331_EXTPA_EN;
+		val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
+	}
+	bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
+}
+
 void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
@@ -90,17 +137,19 @@ void bcma_pmu_workarounds(struct bcma_dr
 		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
 		break;
 	case 0x4331:
-		pr_err("Enabling Ext PA lines not implemented\n");
+		/* BCM4331 workaround is SPROM-related, we put it in sprom.c */
 		break;
 	case 43224:
 		if (bus->chipinfo.rev == 0) {
 			pr_err("Workarounds for 43224 rev 0 not fully "
 				"implemented\n");
-			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
+			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x00F000F0);
 		} else {
 			bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0);
 		}
 		break;
+	case 43225:
+		break;
 	default:
 		pr_err("Workarounds unknown for device 0x%04X\n",
 			bus->chipinfo.id);
@@ -132,3 +181,129 @@ void bcma_pmu_init(struct bcma_drv_cc *c
 	bcma_pmu_swreg_init(cc);
 	bcma_pmu_workarounds(cc);
 }
+
+u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4716:
+	case 0x4748:
+	case 47162:
+	case 0x4313:
+	case 0x5357:
+	case 0x4749:
+	case 53572:
+		/* always 20Mhz */
+		return 20000 * 1000;
+	case 0x5356:
+	case 0x5300:
+		/* always 25Mhz */
+		return 25000 * 1000;
+	default:
+		pr_warn("No ALP clock specified for %04X device, "
+			"pmu rev. %d, using default %d Hz\n",
+			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
+	}
+	return BCMA_CC_PMU_ALP_CLOCK;
+}
+
+/* Find the output of the "m" pll divider given pll controls that start with
+ * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
+ */
+static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+{
+	u32 tmp, div, ndiv, p1, p2, fc;
+	struct bcma_bus *bus = cc->core->bus;
+
+	BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0));
+
+	BUG_ON(!m || m > 4);
+
+	if (bus->chipinfo.id == 0x5357 || bus->chipinfo.id == 0x4749) {
+		/* Detect failure in clock setting */
+		tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
+		if (tmp & 0x40000)
+			return 133 * 1000000;
+	}
+
+	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF);
+	p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT;
+	p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT;
+
+	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF);
+	div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) &
+		BCMA_CC_PPL_MDIV_MASK;
+
+	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF);
+	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
+
+	/* Do calculation in Mhz */
+	fc = bcma_pmu_alp_clock(cc) / 1000000;
+	fc = (p1 * ndiv * fc) / p2;
+
+	/* Return clock in Hertz */
+	return (fc / div) * 1000000;
+}
+
+/* query bus clock frequency for PMU-enabled chipcommon */
+u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	switch (bus->chipinfo.id) {
+	case 0x4716:
+	case 0x4748:
+	case 47162:
+		return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
+				      BCMA_CC_PMU5_MAINPLL_SSB);
+	case 0x5356:
+		return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
+				      BCMA_CC_PMU5_MAINPLL_SSB);
+	case 0x5357:
+	case 0x4749:
+		return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
+				      BCMA_CC_PMU5_MAINPLL_SSB);
+	case 0x5300:
+		return bcma_pmu_clock(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
+				      BCMA_CC_PMU5_MAINPLL_SSB);
+	case 53572:
+		return 75000000;
+	default:
+		pr_warn("No backplane clock specified for %04X device, "
+			"pmu rev. %d, using default %d Hz\n",
+			bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
+	}
+	return BCMA_CC_PMU_HT_CLOCK;
+}
+
+/* query cpu clock frequency for PMU-enabled chipcommon */
+u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	if (bus->chipinfo.id == 53572)
+		return 300000000;
+
+	if (cc->pmu.rev >= 5) {
+		u32 pll;
+		switch (bus->chipinfo.id) {
+		case 0x5356:
+			pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
+			break;
+		case 0x5357:
+		case 0x4749:
+			pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
+			break;
+		default:
+			pll = BCMA_CC_PMU4716_MAINPLL_PLL0;
+			break;
+		}
+
+		/* TODO: if (bus->chipinfo.id == 0x5300)
+		  return si_4706_pmu_clock(sih, osh, cc, PMU4706_MAINPLL_PLL0, PMU5_MAINPLL_CPU); */
+		return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
+	}
+
+	return bcma_pmu_get_clockcontrol(cc);
+}
--- /dev/null
+++ b/drivers/bcma/driver_mips.c
@@ -0,0 +1,256 @@
+/*
+ * Broadcom specific AMBA
+ * Broadcom MIPS32 74K core driver
+ *
+ * Copyright 2009, Broadcom Corporation
+ * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2010, Bernhard Loos <bernhardloos@googlemail.com>
+ * Copyright 2011, Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+
+#include <linux/bcma/bcma.h>
+
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/time.h>
+
+/* The 47162a0 hangs when reading MIPS DMP registers registers */
+static inline bool bcma_core_mips_bcm47162a0_quirk(struct bcma_device *dev)
+{
+	return dev->bus->chipinfo.id == 47162 && dev->bus->chipinfo.rev == 0 &&
+	       dev->id.id == BCMA_CORE_MIPS_74K;
+}
+
+/* The 5357b0 hangs when reading USB20H DMP registers */
+static inline bool bcma_core_mips_bcm5357b0_quirk(struct bcma_device *dev)
+{
+	return (dev->bus->chipinfo.id == 0x5357 ||
+		dev->bus->chipinfo.id == 0x4749) &&
+	       dev->bus->chipinfo.pkg == 11 &&
+	       dev->id.id == BCMA_CORE_USB20_HOST;
+}
+
+static inline u32 mips_read32(struct bcma_drv_mips *mcore,
+			      u16 offset)
+{
+	return bcma_read32(mcore->core, offset);
+}
+
+static inline void mips_write32(struct bcma_drv_mips *mcore,
+				u16 offset,
+				u32 value)
+{
+	bcma_write32(mcore->core, offset, value);
+}
+
+static const u32 ipsflag_irq_mask[] = {
+	0,
+	BCMA_MIPS_IPSFLAG_IRQ1,
+	BCMA_MIPS_IPSFLAG_IRQ2,
+	BCMA_MIPS_IPSFLAG_IRQ3,
+	BCMA_MIPS_IPSFLAG_IRQ4,
+};
+
+static const u32 ipsflag_irq_shift[] = {
+	0,
+	BCMA_MIPS_IPSFLAG_IRQ1_SHIFT,
+	BCMA_MIPS_IPSFLAG_IRQ2_SHIFT,
+	BCMA_MIPS_IPSFLAG_IRQ3_SHIFT,
+	BCMA_MIPS_IPSFLAG_IRQ4_SHIFT,
+};
+
+static u32 bcma_core_mips_irqflag(struct bcma_device *dev)
+{
+	u32 flag;
+
+	if (bcma_core_mips_bcm47162a0_quirk(dev))
+		return dev->core_index;
+	if (bcma_core_mips_bcm5357b0_quirk(dev))
+		return dev->core_index;
+	flag = bcma_aread32(dev, BCMA_MIPS_OOBSELOUTA30);
+
+	return flag & 0x1F;
+}
+
+/* Get the MIPS IRQ assignment for a specified device.
+ * If unassigned, 0 is returned.
+ */
+unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+{
+	struct bcma_device *mdev = dev->bus->drv_mips.core;
+	u32 irqflag;
+	unsigned int irq;
+
+	irqflag = bcma_core_mips_irqflag(dev);
+
+	for (irq = 1; irq <= 4; irq++)
+		if (bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq)) &
+		    (1 << irqflag))
+			return irq;
+
+	return 0;
+}
+EXPORT_SYMBOL(bcma_core_mips_irq);
+
+static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+{
+	unsigned int oldirq = bcma_core_mips_irq(dev);
+	struct bcma_bus *bus = dev->bus;
+	struct bcma_device *mdev = bus->drv_mips.core;
+	u32 irqflag;
+
+	irqflag = bcma_core_mips_irqflag(dev);
+	BUG_ON(oldirq == 6);
+
+	dev->irq = irq + 2;
+
+	/* clear the old irq */
+	if (oldirq == 0)
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
+			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
+			    ~(1 << irqflag));
+	else
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
+
+	/* assign the new one */
+	if (irq == 0) {
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0),
+			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) |
+			    (1 << irqflag));
+	} else {
+		u32 oldirqflag = bcma_read32(mdev,
+					     BCMA_MIPS_MIPS74K_INTMASK(irq));
+		if (oldirqflag) {
+			struct bcma_device *core;
+
+			/* backplane irq line is in use, find out who uses
+			 * it and set user to irq 0
+			 */
+			list_for_each_entry_reverse(core, &bus->cores, list) {
+				if ((1 << bcma_core_mips_irqflag(core)) ==
+				    oldirqflag) {
+					bcma_core_mips_set_irq(core, 0);
+					break;
+				}
+			}
+		}
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq),
+			     1 << irqflag);
+	}
+
+	pr_info("set_irq: core 0x%04x, irq %d => %d\n",
+		dev->id.id, oldirq + 2, irq + 2);
+}
+
+static void bcma_core_mips_print_irq(struct bcma_device *dev, unsigned int irq)
+{
+	int i;
+	static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"};
+	printk(KERN_INFO KBUILD_MODNAME ": core 0x%04x, irq :", dev->id.id);
+	for (i = 0; i <= 6; i++)
+		printk(" %s%s", irq_name[i], i == irq ? "*" : " ");
+	printk("\n");
+}
+
+static void bcma_core_mips_dump_irq(struct bcma_bus *bus)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry_reverse(core, &bus->cores, list) {
+		bcma_core_mips_print_irq(core, bcma_core_mips_irq(core));
+	}
+}
+
+u32 bcma_cpu_clock(struct bcma_drv_mips *mcore)
+{
+	struct bcma_bus *bus = mcore->core->bus;
+
+	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
+		return bcma_pmu_get_clockcpu(&bus->drv_cc);
+
+	pr_err("No PMU available, need this to get the cpu clock\n");
+	return 0;
+}
+EXPORT_SYMBOL(bcma_cpu_clock);
+
+static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
+{
+	struct bcma_bus *bus = mcore->core->bus;
+
+	switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+	case BCMA_CC_FLASHT_STSER:
+	case BCMA_CC_FLASHT_ATSER:
+		pr_err("Serial flash not supported.\n");
+		break;
+	case BCMA_CC_FLASHT_PARA:
+		pr_info("found parallel flash.\n");
+		bus->drv_cc.pflash.window = 0x1c000000;
+		bus->drv_cc.pflash.window_size = 0x02000000;
+
+		if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
+		     BCMA_CC_FLASH_CFG_DS) == 0)
+			bus->drv_cc.pflash.buswidth = 1;
+		else
+			bus->drv_cc.pflash.buswidth = 2;
+		break;
+	default:
+		pr_err("flash not supported.\n");
+	}
+}
+
+void bcma_core_mips_init(struct bcma_drv_mips *mcore)
+{
+	struct bcma_bus *bus;
+	struct bcma_device *core;
+	bus = mcore->core->bus;
+
+	pr_info("Initializing MIPS core...\n");
+
+	if (!mcore->setup_done)
+		mcore->assigned_irqs = 1;
+
+	/* Assign IRQs to all cores on the bus */
+	list_for_each_entry_reverse(core, &bus->cores, list) {
+		int mips_irq;
+		if (core->irq)
+			continue;
+
+		mips_irq = bcma_core_mips_irq(core);
+		if (mips_irq > 4)
+			core->irq = 0;
+		else
+			core->irq = mips_irq + 2;
+		if (core->irq > 5)
+			continue;
+		switch (core->id.id) {
+		case BCMA_CORE_PCI:
+		case BCMA_CORE_PCIE:
+		case BCMA_CORE_ETHERNET:
+		case BCMA_CORE_ETHERNET_GBIT:
+		case BCMA_CORE_MAC_GBIT:
+		case BCMA_CORE_80211:
+		case BCMA_CORE_USB20_HOST:
+			/* These devices get their own IRQ line if available,
+			 * the rest goes on IRQ0
+			 */
+			if (mcore->assigned_irqs <= 4)
+				bcma_core_mips_set_irq(core,
+						       mcore->assigned_irqs++);
+			break;
+		}
+	}
+	pr_info("IRQ reconfiguration done\n");
+	bcma_core_mips_dump_irq(bus);
+
+	if (mcore->setup_done)
+		return;
+
+	bcma_chipco_serial_init(&bus->drv_cc);
+	bcma_core_mips_flash_detect(mcore);
+	mcore->setup_done = true;
+}
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -3,7 +3,7 @@
  * PCI Core
  *
  * Copyright 2005, Broadcom Corporation
- * Copyright 2006, 2007, Michael Buesch <mb@bu3sch.de>
+ * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
@@ -157,7 +157,81 @@ static void bcma_pcicore_serdes_workarou
  * Init.
  **************************************************/
 
-void bcma_core_pci_init(struct bcma_drv_pci *pc)
+static void bcma_core_pci_clientmode_init(struct bcma_drv_pci *pc)
 {
 	bcma_pcicore_serdes_workaround(pc);
 }
+
+static bool bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc)
+{
+	struct bcma_bus *bus = pc->core->bus;
+	u16 chipid_top;
+
+	chipid_top = (bus->chipinfo.id & 0xFF00);
+	if (chipid_top != 0x4700 &&
+	    chipid_top != 0x5300)
+		return false;
+
+#ifdef CONFIG_SSB_DRIVER_PCICORE
+	if (bus->sprom.boardflags_lo & SSB_BFL_NOPCI)
+		return false;
+#endif /* CONFIG_SSB_DRIVER_PCICORE */
+
+#if 0
+	/* TODO: on BCMA we use address from EROM instead of magic formula */
+	u32 tmp;
+	return !mips_busprobe32(tmp, (bus->mmio +
+		(pc->core->core_index * BCMA_CORE_SIZE)));
+#endif
+
+	return true;
+}
+
+void bcma_core_pci_init(struct bcma_drv_pci *pc)
+{
+	if (pc->setup_done)
+		return;
+
+	if (bcma_core_pci_is_in_hostmode(pc)) {
+#ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
+		bcma_core_pci_hostmode_init(pc);
+#else
+		pr_err("Driver compiled without support for hostmode PCI\n");
+#endif /* CONFIG_BCMA_DRIVER_PCI_HOSTMODE */
+	} else {
+		bcma_core_pci_clientmode_init(pc);
+	}
+
+	pc->setup_done = true;
+}
+
+int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
+			  bool enable)
+{
+	struct pci_dev *pdev = pc->core->bus->host_pci;
+	u32 coremask, tmp;
+	int err = 0;
+
+	if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+		/* This bcma device is not on a PCI host-bus. So the IRQs are
+		 * not routed through the PCI core.
+		 * So we must not enable routing through the PCI core. */
+		goto out;
+	}
+
+	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
+	if (err)
+		goto out;
+
+	coremask = BIT(core->core_index) << 8;
+	if (enable)
+		tmp |= coremask;
+	else
+		tmp &= ~coremask;
+
+	err = pci_write_config_dword(pdev, BCMA_PCI_IRQMASK, tmp);
+
+out:
+	return err;
+}
+EXPORT_SYMBOL_GPL(bcma_core_pci_irq_ctl);
--- /dev/null
+++ b/drivers/bcma/driver_pci_host.c
@@ -0,0 +1,14 @@
+/*
+ * Broadcom specific AMBA
+ * PCI Core in hostmode
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include <linux/bcma/bcma.h>
+
+void bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc)
+{
+	pr_err("No support for PCI core in hostmode yet\n");
+}
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -9,6 +9,7 @@
 #include <linux/slab.h>
 #include <linux/bcma/bcma.h>
 #include <linux/pci.h>
+#include <linux/module.h>
 
 static void bcma_host_pci_switch_core(struct bcma_device *core)
 {
@@ -20,50 +21,108 @@ static void bcma_host_pci_switch_core(st
 	pr_debug("Switched to core: 0x%X\n", core->id.id);
 }
 
-static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
-{
+/* Provides access to the requested core. Returns base offset that has to be
+ * used. It makes use of fixed windows when possible. */
+static u16 bcma_host_pci_provide_access_to_core(struct bcma_device *core)
+{
+	switch (core->id.id) {
+	case BCMA_CORE_CHIPCOMMON:
+		return 3 * BCMA_CORE_SIZE;
+	case BCMA_CORE_PCIE:
+		return 2 * BCMA_CORE_SIZE;
+	}
+
 	if (core->bus->mapped_core != core)
 		bcma_host_pci_switch_core(core);
+	return 0;
+}
+
+static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset)
+{
+	offset += bcma_host_pci_provide_access_to_core(core);
 	return ioread8(core->bus->mmio + offset);
 }
 
 static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset)
 {
-	if (core->bus->mapped_core != core)
-		bcma_host_pci_switch_core(core);
+	offset += bcma_host_pci_provide_access_to_core(core);
 	return ioread16(core->bus->mmio + offset);
 }
 
 static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset)
 {
-	if (core->bus->mapped_core != core)
-		bcma_host_pci_switch_core(core);
+	offset += bcma_host_pci_provide_access_to_core(core);
 	return ioread32(core->bus->mmio + offset);
 }
 
 static void bcma_host_pci_write8(struct bcma_device *core, u16 offset,
 				 u8 value)
 {
-	if (core->bus->mapped_core != core)
-		bcma_host_pci_switch_core(core);
+	offset += bcma_host_pci_provide_access_to_core(core);
 	iowrite8(value, core->bus->mmio + offset);
 }
 
 static void bcma_host_pci_write16(struct bcma_device *core, u16 offset,
 				 u16 value)
 {
-	if (core->bus->mapped_core != core)
-		bcma_host_pci_switch_core(core);
+	offset += bcma_host_pci_provide_access_to_core(core);
 	iowrite16(value, core->bus->mmio + offset);
 }
 
 static void bcma_host_pci_write32(struct bcma_device *core, u16 offset,
 				 u32 value)
 {
+	offset += bcma_host_pci_provide_access_to_core(core);
+	iowrite32(value, core->bus->mmio + offset);
+}
+
+#ifdef CONFIG_BCMA_BLOCKIO
+void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
+			      size_t count, u16 offset, u8 reg_width)
+{
+	void __iomem *addr = core->bus->mmio + offset;
 	if (core->bus->mapped_core != core)
 		bcma_host_pci_switch_core(core);
-	iowrite32(value, core->bus->mmio + offset);
+	switch (reg_width) {
+	case sizeof(u8):
+		ioread8_rep(addr, buffer, count);
+		break;
+	case sizeof(u16):
+		WARN_ON(count & 1);
+		ioread16_rep(addr, buffer, count >> 1);
+		break;
+	case sizeof(u32):
+		WARN_ON(count & 3);
+		ioread32_rep(addr, buffer, count >> 2);
+		break;
+	default:
+		WARN_ON(1);
+	}
+}
+
+void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
+			       size_t count, u16 offset, u8 reg_width)
+{
+	void __iomem *addr = core->bus->mmio + offset;
+	if (core->bus->mapped_core != core)
+		bcma_host_pci_switch_core(core);
+	switch (reg_width) {
+	case sizeof(u8):
+		iowrite8_rep(addr, buffer, count);
+		break;
+	case sizeof(u16):
+		WARN_ON(count & 1);
+		iowrite16_rep(addr, buffer, count >> 1);
+		break;
+	case sizeof(u32):
+		WARN_ON(count & 3);
+		iowrite32_rep(addr, buffer, count >> 2);
+		break;
+	default:
+		WARN_ON(1);
+	}
 }
+#endif
 
 static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset)
 {
@@ -87,6 +146,10 @@ const struct bcma_host_ops bcma_host_pci
 	.write8		= bcma_host_pci_write8,
 	.write16	= bcma_host_pci_write16,
 	.write32	= bcma_host_pci_write32,
+#ifdef CONFIG_BCMA_BLOCKIO
+	.block_read	= bcma_host_pci_block_read,
+	.block_write	= bcma_host_pci_block_write,
+#endif
 	.aread32	= bcma_host_pci_aread32,
 	.awrite32	= bcma_host_pci_awrite32,
 };
@@ -171,10 +234,46 @@ static void bcma_host_pci_remove(struct
 	pci_set_drvdata(dev, NULL);
 }
 
+#ifdef CONFIG_PM
+static int bcma_host_pci_suspend(struct pci_dev *dev, pm_message_t state)
+{
+	/* Host specific */
+	pci_save_state(dev);
+	pci_disable_device(dev);
+	pci_set_power_state(dev, pci_choose_state(dev, state));
+
+	return 0;
+}
+
+static int bcma_host_pci_resume(struct pci_dev *dev)
+{
+	struct bcma_bus *bus = pci_get_drvdata(dev);
+	int err;
+
+	/* Host specific */
+	pci_set_power_state(dev, 0);
+	err = pci_enable_device(dev);
+	if (err)
+		return err;
+	pci_restore_state(dev);
+
+	/* Bus specific */
+	err = bcma_bus_resume(bus);
+	if (err)
+		return err;
+
+	return 0;
+}
+#else /* CONFIG_PM */
+# define bcma_host_pci_suspend	NULL
+# define bcma_host_pci_resume	NULL
+#endif /* CONFIG_PM */
+
 static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
 	{ 0, },
 };
@@ -185,6 +284,8 @@ static struct pci_driver bcma_pci_bridge
 	.id_table = bcma_pci_bridge_tbl,
 	.probe = bcma_host_pci_probe,
 	.remove = bcma_host_pci_remove,
+	.suspend = bcma_host_pci_suspend,
+	.resume = bcma_host_pci_resume,
 };
 
 int __init bcma_host_pci_init(void)
--- /dev/null
+++ b/drivers/bcma/host_soc.c
@@ -0,0 +1,183 @@
+/*
+ * Broadcom specific AMBA
+ * System on Chip (SoC) Host
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+#include "scan.h"
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_soc.h>
+
+static u8 bcma_host_soc_read8(struct bcma_device *core, u16 offset)
+{
+	return readb(core->io_addr + offset);
+}
+
+static u16 bcma_host_soc_read16(struct bcma_device *core, u16 offset)
+{
+	return readw(core->io_addr + offset);
+}
+
+static u32 bcma_host_soc_read32(struct bcma_device *core, u16 offset)
+{
+	return readl(core->io_addr + offset);
+}
+
+static void bcma_host_soc_write8(struct bcma_device *core, u16 offset,
+				 u8 value)
+{
+	writeb(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_write16(struct bcma_device *core, u16 offset,
+				 u16 value)
+{
+	writew(value, core->io_addr + offset);
+}
+
+static void bcma_host_soc_write32(struct bcma_device *core, u16 offset,
+				 u32 value)
+{
+	writel(value, core->io_addr + offset);
+}
+
+#ifdef CONFIG_BCMA_BLOCKIO
+static void bcma_host_soc_block_read(struct bcma_device *core, void *buffer,
+				     size_t count, u16 offset, u8 reg_width)
+{
+	void __iomem *addr = core->io_addr + offset;
+
+	switch (reg_width) {
+	case sizeof(u8): {
+		u8 *buf = buffer;
+
+		while (count) {
+			*buf = __raw_readb(addr);
+			buf++;
+			count--;
+		}
+		break;
+	}
+	case sizeof(u16): {
+		__le16 *buf = buffer;
+
+		WARN_ON(count & 1);
+		while (count) {
+			*buf = (__force __le16)__raw_readw(addr);
+			buf++;
+			count -= 2;
+		}
+		break;
+	}
+	case sizeof(u32): {
+		__le32 *buf = buffer;
+
+		WARN_ON(count & 3);
+		while (count) {
+			*buf = (__force __le32)__raw_readl(addr);
+			buf++;
+			count -= 4;
+		}
+		break;
+	}
+	default:
+		WARN_ON(1);
+	}
+}
+
+static void bcma_host_soc_block_write(struct bcma_device *core,
+				      const void *buffer,
+				      size_t count, u16 offset, u8 reg_width)
+{
+	void __iomem *addr = core->io_addr + offset;
+
+	switch (reg_width) {
+	case sizeof(u8): {
+		const u8 *buf = buffer;
+
+		while (count) {
+			__raw_writeb(*buf, addr);
+			buf++;
+			count--;
+		}
+		break;
+	}
+	case sizeof(u16): {
+		const __le16 *buf = buffer;
+
+		WARN_ON(count & 1);
+		while (count) {
+			__raw_writew((__force u16)(*buf), addr);
+			buf++;
+			count -= 2;
+		}
+		break;
+	}
+	case sizeof(u32): {
+		const __le32 *buf = buffer;
+
+		WARN_ON(count & 3);
+		while (count) {
+			__raw_writel((__force u32)(*buf), addr);
+			buf++;
+			count -= 4;
+		}
+		break;
+	}
+	default:
+		WARN_ON(1);
+	}
+}
+#endif /* CONFIG_BCMA_BLOCKIO */
+
+static u32 bcma_host_soc_aread32(struct bcma_device *core, u16 offset)
+{
+	return readl(core->io_wrap + offset);
+}
+
+static void bcma_host_soc_awrite32(struct bcma_device *core, u16 offset,
+				  u32 value)
+{
+	writel(value, core->io_wrap + offset);
+}
+
+const struct bcma_host_ops bcma_host_soc_ops = {
+	.read8		= bcma_host_soc_read8,
+	.read16		= bcma_host_soc_read16,
+	.read32		= bcma_host_soc_read32,
+	.write8		= bcma_host_soc_write8,
+	.write16	= bcma_host_soc_write16,
+	.write32	= bcma_host_soc_write32,
+#ifdef CONFIG_BCMA_BLOCKIO
+	.block_read	= bcma_host_soc_block_read,
+	.block_write	= bcma_host_soc_block_write,
+#endif
+	.aread32	= bcma_host_soc_aread32,
+	.awrite32	= bcma_host_soc_awrite32,
+};
+
+int __init bcma_host_soc_register(struct bcma_soc *soc)
+{
+	struct bcma_bus *bus = &soc->bus;
+	int err;
+
+	/* iomap only first core. We have to read some register on this core
+	 * to scan the bus.
+	 */
+	bus->mmio = ioremap_nocache(BCMA_ADDR_BASE, BCMA_CORE_SIZE * 1);
+	if (!bus->mmio)
+		return -ENOMEM;
+
+	/* Host specific */
+	bus->hosttype = BCMA_HOSTTYPE_SOC;
+	bus->ops = &bcma_host_soc_ops;
+
+	/* Register */
+	err = bcma_bus_early_register(bus, &soc->core_cc, &soc->core_mips);
+	if (err)
+		iounmap(bus->mmio);
+
+	return err;
+}
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -6,7 +6,9 @@
  */
 
 #include "bcma_private.h"
+#include <linux/module.h>
 #include <linux/bcma/bcma.h>
+#include <linux/slab.h>
 
 MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
 MODULE_LICENSE("GPL");
@@ -14,6 +16,7 @@ MODULE_LICENSE("GPL");
 static int bcma_bus_match(struct device *dev, struct device_driver *drv);
 static int bcma_device_probe(struct device *dev);
 static int bcma_device_remove(struct device *dev);
+static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env);
 
 static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
@@ -48,6 +51,7 @@ static struct bus_type bcma_bus_type = {
 	.match		= bcma_bus_match,
 	.probe		= bcma_device_probe,
 	.remove		= bcma_device_remove,
+	.uevent		= bcma_device_uevent,
 	.dev_attrs	= bcma_device_attrs,
 };
 
@@ -65,6 +69,10 @@ static struct bcma_device *bcma_find_cor
 static void bcma_release_core_dev(struct device *dev)
 {
 	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+	if (core->io_addr)
+		iounmap(core->io_addr);
+	if (core->io_wrap)
+		iounmap(core->io_wrap);
 	kfree(core);
 }
 
@@ -79,6 +87,7 @@ static int bcma_register_cores(struct bc
 		case BCMA_CORE_CHIPCOMMON:
 		case BCMA_CORE_PCI:
 		case BCMA_CORE_PCIE:
+		case BCMA_CORE_MIPS_74K:
 			continue;
 		}
 
@@ -89,8 +98,13 @@ static int bcma_register_cores(struct bc
 		switch (bus->hosttype) {
 		case BCMA_HOSTTYPE_PCI:
 			core->dev.parent = &bus->host_pci->dev;
+			core->dma_dev = &bus->host_pci->dev;
+			core->irq = bus->host_pci->irq;
+			break;
+		case BCMA_HOSTTYPE_SOC:
+			core->dev.dma_mask = &core->dev.coherent_dma_mask;
+			core->dma_dev = &core->dev;
 			break;
-		case BCMA_HOSTTYPE_NONE:
 		case BCMA_HOSTTYPE_SDIO:
 			break;
 		}
@@ -137,6 +151,13 @@ int bcma_bus_register(struct bcma_bus *b
 		bcma_core_chipcommon_init(&bus->drv_cc);
 	}
 
+	/* Init MIPS core */
+	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+	if (core) {
+		bus->drv_mips.core = core;
+		bcma_core_mips_init(&bus->drv_mips);
+	}
+
 	/* Init PCIE core */
 	core = bcma_find_core(bus, BCMA_CORE_PCIE);
 	if (core) {
@@ -144,6 +165,15 @@ int bcma_bus_register(struct bcma_bus *b
 		bcma_core_pci_init(&bus->drv_pci);
 	}
 
+	/* Try to get SPROM */
+	err = bcma_sprom_get(bus);
+	if (err == -ENOENT) {
+		pr_err("No SPROM available\n");
+	} else if (err) {
+		pr_err("Failed to get SPROM: %d\n", err);
+		return -ENOENT;
+	}
+
 	/* Register found cores */
 	bcma_register_cores(bus);
 
@@ -151,13 +181,80 @@ int bcma_bus_register(struct bcma_bus *b
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(bcma_bus_register);
 
 void bcma_bus_unregister(struct bcma_bus *bus)
 {
 	bcma_unregister_cores(bus);
 }
-EXPORT_SYMBOL_GPL(bcma_bus_unregister);
+
+int __init bcma_bus_early_register(struct bcma_bus *bus,
+				   struct bcma_device *core_cc,
+				   struct bcma_device *core_mips)
+{
+	int err;
+	struct bcma_device *core;
+	struct bcma_device_id match;
+
+	bcma_init_bus(bus);
+
+	match.manuf = BCMA_MANUF_BCM;
+	match.id = BCMA_CORE_CHIPCOMMON;
+	match.class = BCMA_CL_SIM;
+	match.rev = BCMA_ANY_REV;
+
+	/* Scan for chip common core */
+	err = bcma_bus_scan_early(bus, &match, core_cc);
+	if (err) {
+		pr_err("Failed to scan for common core: %d\n", err);
+		return -1;
+	}
+
+	match.manuf = BCMA_MANUF_MIPS;
+	match.id = BCMA_CORE_MIPS_74K;
+	match.class = BCMA_CL_SIM;
+	match.rev = BCMA_ANY_REV;
+
+	/* Scan for mips core */
+	err = bcma_bus_scan_early(bus, &match, core_mips);
+	if (err) {
+		pr_err("Failed to scan for mips core: %d\n", err);
+		return -1;
+	}
+
+	/* Init CC core */
+	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+	if (core) {
+		bus->drv_cc.core = core;
+		bcma_core_chipcommon_init(&bus->drv_cc);
+	}
+
+	/* Init MIPS core */
+	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+	if (core) {
+		bus->drv_mips.core = core;
+		bcma_core_mips_init(&bus->drv_mips);
+	}
+
+	pr_info("Early bus registered\n");
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+int bcma_bus_resume(struct bcma_bus *bus)
+{
+	struct bcma_device *core;
+
+	/* Init CC core */
+	core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON);
+	if (core) {
+		bus->drv_cc.setup_done = false;
+		bcma_core_chipcommon_init(&bus->drv_cc);
+	}
+
+	return 0;
+}
+#endif
 
 int __bcma_driver_register(struct bcma_driver *drv, struct module *owner)
 {
@@ -217,6 +314,16 @@ static int bcma_device_remove(struct dev
 	return 0;
 }
 
+static int bcma_device_uevent(struct device *dev, struct kobj_uevent_env *env)
+{
+	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
+
+	return add_uevent_var(env,
+			      "MODALIAS=bcma:m%04Xid%04Xrev%02Xcl%02X",
+			      core->id.manuf, core->id.id,
+			      core->id.rev, core->id.class);
+}
+
 static int __init bcma_modinit(void)
 {
 	int err;
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
@@ -200,18 +200,162 @@ static s32 bcma_erom_get_addr_desc(struc
 	return addrl;
 }
 
-int bcma_bus_scan(struct bcma_bus *bus)
+static struct bcma_device *bcma_find_core_by_index(struct bcma_bus *bus,
+						   u16 index)
 {
-	u32 erombase;
-	u32 __iomem *eromptr, *eromend;
+	struct bcma_device *core;
 
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->core_index == index)
+			return core;
+	}
+	return NULL;
+}
+
+static int bcma_get_next_core(struct bcma_bus *bus, u32 __iomem **eromptr,
+			      struct bcma_device_id *match, int core_num,
+			      struct bcma_device *core)
+{
+	s32 tmp;
+	u8 i, j;
 	s32 cia, cib;
 	u8 ports[2], wrappers[2];
 
+	/* get CIs */
+	cia = bcma_erom_get_ci(bus, eromptr);
+	if (cia < 0) {
+		bcma_erom_push_ent(eromptr);
+		if (bcma_erom_is_end(bus, eromptr))
+			return -ESPIPE;
+		return -EILSEQ;
+	}
+	cib = bcma_erom_get_ci(bus, eromptr);
+	if (cib < 0)
+		return -EILSEQ;
+
+	/* parse CIs */
+	core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
+	core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
+	core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
+	ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
+	ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
+	wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
+	wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
+	core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
+
+	if (((core->id.manuf == BCMA_MANUF_ARM) &&
+	     (core->id.id == 0xFFF)) ||
+	    (ports[1] == 0)) {
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENXIO;
+	}
+
+	/* check if component is a core at all */
+	if (wrappers[0] + wrappers[1] == 0) {
+		/* we could save addrl of the router
+		if (cid == BCMA_CORE_OOB_ROUTER)
+		 */
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENXIO;
+	}
+
+	if (bcma_erom_is_bridge(bus, eromptr)) {
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENXIO;
+	}
+
+	if (bcma_find_core_by_index(bus, core_num)) {
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENODEV;
+	}
+
+	if (match && ((match->manuf != BCMA_ANY_MANUF &&
+	      match->manuf != core->id.manuf) ||
+	     (match->id != BCMA_ANY_ID && match->id != core->id.id) ||
+	     (match->rev != BCMA_ANY_REV && match->rev != core->id.rev) ||
+	     (match->class != BCMA_ANY_CLASS && match->class != core->id.class)
+	    )) {
+		bcma_erom_skip_component(bus, eromptr);
+		return -ENODEV;
+	}
+
+	/* get & parse master ports */
+	for (i = 0; i < ports[0]; i++) {
+		s32 mst_port_d = bcma_erom_get_mst_port(bus, eromptr);
+		if (mst_port_d < 0)
+			return -EILSEQ;
+	}
+
+	/* get & parse slave ports */
+	for (i = 0; i < ports[1]; i++) {
+		for (j = 0; ; j++) {
+			tmp = bcma_erom_get_addr_desc(bus, eromptr,
+				SCAN_ADDR_TYPE_SLAVE, i);
+			if (tmp < 0) {
+				/* no more entries for port _i_ */
+				/* pr_debug("erom: slave port %d "
+				 * "has %d descriptors\n", i, j); */
+				break;
+			} else {
+				if (i == 0 && j == 0)
+					core->addr = tmp;
+			}
+		}
+	}
+
+	/* get & parse master wrappers */
+	for (i = 0; i < wrappers[0]; i++) {
+		for (j = 0; ; j++) {
+			tmp = bcma_erom_get_addr_desc(bus, eromptr,
+				SCAN_ADDR_TYPE_MWRAP, i);
+			if (tmp < 0) {
+				/* no more entries for port _i_ */
+				/* pr_debug("erom: master wrapper %d "
+				 * "has %d descriptors\n", i, j); */
+				break;
+			} else {
+				if (i == 0 && j == 0)
+					core->wrap = tmp;
+			}
+		}
+	}
+
+	/* get & parse slave wrappers */
+	for (i = 0; i < wrappers[1]; i++) {
+		u8 hack = (ports[1] == 1) ? 0 : 1;
+		for (j = 0; ; j++) {
+			tmp = bcma_erom_get_addr_desc(bus, eromptr,
+				SCAN_ADDR_TYPE_SWRAP, i + hack);
+			if (tmp < 0) {
+				/* no more entries for port _i_ */
+				/* pr_debug("erom: master wrapper %d "
+				 * has %d descriptors\n", i, j); */
+				break;
+			} else {
+				if (wrappers[0] == 0 && !i && !j)
+					core->wrap = tmp;
+			}
+		}
+	}
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+		core->io_addr = ioremap_nocache(core->addr, BCMA_CORE_SIZE);
+		if (!core->io_addr)
+			return -ENOMEM;
+		core->io_wrap = ioremap_nocache(core->wrap, BCMA_CORE_SIZE);
+		if (!core->io_wrap) {
+			iounmap(core->io_addr);
+			return -ENOMEM;
+		}
+	}
+	return 0;
+}
+
+void bcma_init_bus(struct bcma_bus *bus)
+{
 	s32 tmp;
-	u8 i, j;
 
-	int err;
+	if (bus->init_done)
+		return;
 
 	INIT_LIST_HEAD(&bus->cores);
 	bus->nr_cores = 0;
@@ -222,9 +366,27 @@ int bcma_bus_scan(struct bcma_bus *bus)
 	bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT;
 	bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT;
 	bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT;
+	bus->init_done = true;
+}
+
+int bcma_bus_scan(struct bcma_bus *bus)
+{
+	u32 erombase;
+	u32 __iomem *eromptr, *eromend;
+
+	int err, core_num = 0;
+
+	bcma_init_bus(bus);
 
 	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
-	eromptr = bus->mmio;
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+		eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+		if (!eromptr)
+			return -ENOMEM;
+	} else {
+		eromptr = bus->mmio;
+	}
+
 	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
 
 	bcma_scan_switch_core(bus, erombase);
@@ -236,125 +398,89 @@ int bcma_bus_scan(struct bcma_bus *bus)
 		INIT_LIST_HEAD(&core->list);
 		core->bus = bus;
 
-		/* get CIs */
-		cia = bcma_erom_get_ci(bus, &eromptr);
-		if (cia < 0) {
-			bcma_erom_push_ent(&eromptr);
-			if (bcma_erom_is_end(bus, &eromptr))
-				break;
-			err= -EILSEQ;
-			goto out;
-		}
-		cib = bcma_erom_get_ci(bus, &eromptr);
-		if (cib < 0) {
-			err= -EILSEQ;
-			goto out;
-		}
-
-		/* parse CIs */
-		core->id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT;
-		core->id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT;
-		core->id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT;
-		ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT;
-		ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT;
-		wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT;
-		wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT;
-		core->id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT;
-
-		if (((core->id.manuf == BCMA_MANUF_ARM) &&
-		     (core->id.id == 0xFFF)) ||
-		    (ports[1] == 0)) {
-			bcma_erom_skip_component(bus, &eromptr);
+		err = bcma_get_next_core(bus, &eromptr, NULL, core_num, core);
+		if (err == -ENODEV) {
+			core_num++;
 			continue;
-		}
-
-		/* check if component is a core at all */
-		if (wrappers[0] + wrappers[1] == 0) {
-			/* we could save addrl of the router
-			if (cid == BCMA_CORE_OOB_ROUTER)
-			 */
-			bcma_erom_skip_component(bus, &eromptr);
+		} else if (err == -ENXIO)
 			continue;
-		}
+		else if (err == -ESPIPE)
+			break;
+		else if (err < 0)
+			return err;
 
-		if (bcma_erom_is_bridge(bus, &eromptr)) {
-			bcma_erom_skip_component(bus, &eromptr);
-			continue;
-		}
+		core->core_index = core_num++;
+		bus->nr_cores++;
 
-		/* get & parse master ports */
-		for (i = 0; i < ports[0]; i++) {
-			u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr);
-			if (mst_port_d < 0) {
-				err= -EILSEQ;
-				goto out;
-			}
-		}
+		pr_info("Core %d found: %s "
+			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+			core->core_index, bcma_device_name(&core->id),
+			core->id.manuf, core->id.id, core->id.rev,
+			core->id.class);
 
-		/* get & parse slave ports */
-		for (i = 0; i < ports[1]; i++) {
-			for (j = 0; ; j++) {
-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
-					SCAN_ADDR_TYPE_SLAVE, i);
-				if (tmp < 0) {
-					/* no more entries for port _i_ */
-					/* pr_debug("erom: slave port %d "
-					 * "has %d descriptors\n", i, j); */
-					break;
-				} else {
-					if (i == 0 && j == 0)
-						core->addr = tmp;
-				}
-			}
-		}
+		list_add(&core->list, &bus->cores);
+	}
 
-		/* get & parse master wrappers */
-		for (i = 0; i < wrappers[0]; i++) {
-			for (j = 0; ; j++) {
-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
-					SCAN_ADDR_TYPE_MWRAP, i);
-				if (tmp < 0) {
-					/* no more entries for port _i_ */
-					/* pr_debug("erom: master wrapper %d "
-					 * "has %d descriptors\n", i, j); */
-					break;
-				} else {
-					if (i == 0 && j == 0)
-						core->wrap = tmp;
-				}
-			}
-		}
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+		iounmap(eromptr);
 
-		/* get & parse slave wrappers */
-		for (i = 0; i < wrappers[1]; i++) {
-			u8 hack = (ports[1] == 1) ? 0 : 1;
-			for (j = 0; ; j++) {
-				tmp = bcma_erom_get_addr_desc(bus, &eromptr,
-					SCAN_ADDR_TYPE_SWRAP, i + hack);
-				if (tmp < 0) {
-					/* no more entries for port _i_ */
-					/* pr_debug("erom: master wrapper %d "
-					 * has %d descriptors\n", i, j); */
-					break;
-				} else {
-					if (wrappers[0] == 0 && !i && !j)
-						core->wrap = tmp;
-				}
-			}
-		}
+	return 0;
+}
+
+int __init bcma_bus_scan_early(struct bcma_bus *bus,
+			       struct bcma_device_id *match,
+			       struct bcma_device *core)
+{
+	u32 erombase;
+	u32 __iomem *eromptr, *eromend;
 
+	int err = -ENODEV;
+	int core_num = 0;
+
+	erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+		eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+		if (!eromptr)
+			return -ENOMEM;
+	} else {
+		eromptr = bus->mmio;
+	}
+
+	eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32);
+
+	bcma_scan_switch_core(bus, erombase);
+
+	while (eromptr < eromend) {
+		memset(core, 0, sizeof(*core));
+		INIT_LIST_HEAD(&core->list);
+		core->bus = bus;
+
+		err = bcma_get_next_core(bus, &eromptr, match, core_num, core);
+		if (err == -ENODEV) {
+			core_num++;
+			continue;
+		} else if (err == -ENXIO)
+			continue;
+		else if (err == -ESPIPE)
+			break;
+		else if (err < 0)
+			return err;
+
+		core->core_index = core_num++;
+		bus->nr_cores++;
 		pr_info("Core %d found: %s "
 			"(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
-			bus->nr_cores, bcma_device_name(&core->id),
+			core->core_index, bcma_device_name(&core->id),
 			core->id.manuf, core->id.id, core->id.rev,
 			core->id.class);
 
-		core->core_index = bus->nr_cores++;
 		list_add(&core->list, &bus->cores);
-		continue;
-out:
-		return err;
+		err = 0;
+		break;
 	}
 
-	return 0;
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+		iounmap(eromptr);
+
+	return err;
 }
--- /dev/null
+++ b/drivers/bcma/sprom.c
@@ -0,0 +1,247 @@
+/*
+ * Broadcom specific AMBA
+ * SPROM reading
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcma_private.h"
+
+#include <linux/bcma/bcma.h>
+#include <linux/bcma/bcma_regs.h>
+#include <linux/pci.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+
+#define SPOFF(offset)	((offset) / sizeof(u16))
+
+/**************************************************
+ * R/W ops.
+ **************************************************/
+
+static void bcma_sprom_read(struct bcma_bus *bus, u16 offset, u16 *sprom)
+{
+	int i;
+	for (i = 0; i < SSB_SPROMSIZE_WORDS_R4; i++)
+		sprom[i] = bcma_read16(bus->drv_cc.core,
+				       offset + (i * 2));
+}
+
+/**************************************************
+ * Validation.
+ **************************************************/
+
+static inline u8 bcma_crc8(u8 crc, u8 data)
+{
+	/* Polynomial:   x^8 + x^7 + x^6 + x^4 + x^2 + 1   */
+	static const u8 t[] = {
+		0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
+		0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
+		0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
+		0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
+		0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
+		0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
+		0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
+		0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
+		0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
+		0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
+		0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
+		0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
+		0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
+		0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
+		0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
+		0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
+		0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
+		0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
+		0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
+		0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
+		0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
+		0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
+		0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
+		0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
+		0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
+		0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
+		0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
+		0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
+		0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
+		0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
+		0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
+		0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F,
+	};
+	return t[crc ^ data];
+}
+
+static u8 bcma_sprom_crc(const u16 *sprom)
+{
+	int word;
+	u8 crc = 0xFF;
+
+	for (word = 0; word < SSB_SPROMSIZE_WORDS_R4 - 1; word++) {
+		crc = bcma_crc8(crc, sprom[word] & 0x00FF);
+		crc = bcma_crc8(crc, (sprom[word] & 0xFF00) >> 8);
+	}
+	crc = bcma_crc8(crc, sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & 0x00FF);
+	crc ^= 0xFF;
+
+	return crc;
+}
+
+static int bcma_sprom_check_crc(const u16 *sprom)
+{
+	u8 crc;
+	u8 expected_crc;
+	u16 tmp;
+
+	crc = bcma_sprom_crc(sprom);
+	tmp = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_CRC;
+	expected_crc = tmp >> SSB_SPROM_REVISION_CRC_SHIFT;
+	if (crc != expected_crc)
+		return -EPROTO;
+
+	return 0;
+}
+
+static int bcma_sprom_valid(const u16 *sprom)
+{
+	u16 revision;
+	int err;
+
+	err = bcma_sprom_check_crc(sprom);
+	if (err)
+		return err;
+
+	revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] & SSB_SPROM_REVISION_REV;
+	if (revision != 8 && revision != 9) {
+		pr_err("Unsupported SPROM revision: %d\n", revision);
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+/**************************************************
+ * SPROM extraction.
+ **************************************************/
+
+static void bcma_sprom_extract_r8(struct bcma_bus *bus, const u16 *sprom)
+{
+	u16 v;
+	int i;
+
+	bus->sprom.revision = sprom[SSB_SPROMSIZE_WORDS_R4 - 1] &
+		SSB_SPROM_REVISION_REV;
+
+	for (i = 0; i < 3; i++) {
+		v = sprom[SPOFF(SSB_SPROM8_IL0MAC) + i];
+		*(((__be16 *)bus->sprom.il0mac) + i) = cpu_to_be16(v);
+	}
+
+	bus->sprom.board_rev = sprom[SPOFF(SSB_SPROM8_BOARDREV)];
+
+	bus->sprom.txpid2g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+	     SSB_SPROM4_TXPID2G0) >> SSB_SPROM4_TXPID2G0_SHIFT;
+	bus->sprom.txpid2g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID2G01)] &
+	     SSB_SPROM4_TXPID2G1) >> SSB_SPROM4_TXPID2G1_SHIFT;
+	bus->sprom.txpid2g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+	     SSB_SPROM4_TXPID2G2) >> SSB_SPROM4_TXPID2G2_SHIFT;
+	bus->sprom.txpid2g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID2G23)] &
+	     SSB_SPROM4_TXPID2G3) >> SSB_SPROM4_TXPID2G3_SHIFT;
+
+	bus->sprom.txpid5gl[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+	     SSB_SPROM4_TXPID5GL0) >> SSB_SPROM4_TXPID5GL0_SHIFT;
+	bus->sprom.txpid5gl[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL01)] &
+	     SSB_SPROM4_TXPID5GL1) >> SSB_SPROM4_TXPID5GL1_SHIFT;
+	bus->sprom.txpid5gl[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+	     SSB_SPROM4_TXPID5GL2) >> SSB_SPROM4_TXPID5GL2_SHIFT;
+	bus->sprom.txpid5gl[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GL23)] &
+	     SSB_SPROM4_TXPID5GL3) >> SSB_SPROM4_TXPID5GL3_SHIFT;
+
+	bus->sprom.txpid5g[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+	     SSB_SPROM4_TXPID5G0) >> SSB_SPROM4_TXPID5G0_SHIFT;
+	bus->sprom.txpid5g[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5G01)] &
+	     SSB_SPROM4_TXPID5G1) >> SSB_SPROM4_TXPID5G1_SHIFT;
+	bus->sprom.txpid5g[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+	     SSB_SPROM4_TXPID5G2) >> SSB_SPROM4_TXPID5G2_SHIFT;
+	bus->sprom.txpid5g[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5G23)] &
+	     SSB_SPROM4_TXPID5G3) >> SSB_SPROM4_TXPID5G3_SHIFT;
+
+	bus->sprom.txpid5gh[0] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+	     SSB_SPROM4_TXPID5GH0) >> SSB_SPROM4_TXPID5GH0_SHIFT;
+	bus->sprom.txpid5gh[1] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH01)] &
+	     SSB_SPROM4_TXPID5GH1) >> SSB_SPROM4_TXPID5GH1_SHIFT;
+	bus->sprom.txpid5gh[2] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+	     SSB_SPROM4_TXPID5GH2) >> SSB_SPROM4_TXPID5GH2_SHIFT;
+	bus->sprom.txpid5gh[3] = (sprom[SPOFF(SSB_SPROM4_TXPID5GH23)] &
+	     SSB_SPROM4_TXPID5GH3) >> SSB_SPROM4_TXPID5GH3_SHIFT;
+
+	bus->sprom.boardflags_lo = sprom[SPOFF(SSB_SPROM8_BFLLO)];
+	bus->sprom.boardflags_hi = sprom[SPOFF(SSB_SPROM8_BFLHI)];
+	bus->sprom.boardflags2_lo = sprom[SPOFF(SSB_SPROM8_BFL2LO)];
+	bus->sprom.boardflags2_hi = sprom[SPOFF(SSB_SPROM8_BFL2HI)];
+
+	bus->sprom.country_code = sprom[SPOFF(SSB_SPROM8_CCODE)];
+
+	bus->sprom.fem.ghz2.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+	bus->sprom.fem.ghz2.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+	bus->sprom.fem.ghz2.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+	bus->sprom.fem.ghz2.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+	bus->sprom.fem.ghz2.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM2G)] &
+		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+
+	bus->sprom.fem.ghz5.tssipos = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+		SSB_SROM8_FEM_TSSIPOS) >> SSB_SROM8_FEM_TSSIPOS_SHIFT;
+	bus->sprom.fem.ghz5.extpa_gain = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+		SSB_SROM8_FEM_EXTPA_GAIN) >> SSB_SROM8_FEM_EXTPA_GAIN_SHIFT;
+	bus->sprom.fem.ghz5.pdet_range = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+		SSB_SROM8_FEM_PDET_RANGE) >> SSB_SROM8_FEM_PDET_RANGE_SHIFT;
+	bus->sprom.fem.ghz5.tr_iso = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+		SSB_SROM8_FEM_TR_ISO) >> SSB_SROM8_FEM_TR_ISO_SHIFT;
+	bus->sprom.fem.ghz5.antswlut = (sprom[SPOFF(SSB_SPROM8_FEM5G)] &
+		SSB_SROM8_FEM_ANTSWLUT) >> SSB_SROM8_FEM_ANTSWLUT_SHIFT;
+}
+
+int bcma_sprom_get(struct bcma_bus *bus)
+{
+	u16 offset;
+	u16 *sprom;
+	int err = 0;
+
+	if (!bus->drv_cc.core)
+		return -EOPNOTSUPP;
+
+	if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
+		return -ENOENT;
+
+	sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
+			GFP_KERNEL);
+	if (!sprom)
+		return -ENOMEM;
+
+	if (bus->chipinfo.id == 0x4331)
+		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
+
+	/* Most cards have SPROM moved by additional offset 0x30 (48 dwords).
+	 * According to brcm80211 this applies to cards with PCIe rev >= 6
+	 * TODO: understand this condition and use it */
+	offset = (bus->chipinfo.id == 0x4331) ? BCMA_CC_SPROM :
+		BCMA_CC_SPROM_PCIE6;
+	bcma_sprom_read(bus, offset, sprom);
+
+	if (bus->chipinfo.id == 0x4331)
+		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
+
+	err = bcma_sprom_valid(sprom);
+	if (err)
+		goto out;
+
+	bcma_sprom_extract_r8(bus, sprom);
+
+out:
+	kfree(sprom);
+	return err;
+}
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -6,6 +6,8 @@
 
 #include <linux/bcma/bcma_driver_chipcommon.h>
 #include <linux/bcma/bcma_driver_pci.h>
+#include <linux/bcma/bcma_driver_mips.h>
+#include <linux/ssb/ssb.h> /* SPROM sharing */
 
 #include "bcma_regs.h"
 
@@ -13,9 +15,9 @@ struct bcma_device;
 struct bcma_bus;
 
 enum bcma_hosttype {
-	BCMA_HOSTTYPE_NONE,
 	BCMA_HOSTTYPE_PCI,
 	BCMA_HOSTTYPE_SDIO,
+	BCMA_HOSTTYPE_SOC,
 };
 
 struct bcma_chipinfo {
@@ -24,6 +26,11 @@ struct bcma_chipinfo {
 	u8 pkg;
 };
 
+enum bcma_clkmode {
+	BCMA_CLKMODE_FAST,
+	BCMA_CLKMODE_DYNAMIC,
+};
+
 struct bcma_host_ops {
 	u8 (*read8)(struct bcma_device *core, u16 offset);
 	u16 (*read16)(struct bcma_device *core, u16 offset);
@@ -31,6 +38,12 @@ struct bcma_host_ops {
 	void (*write8)(struct bcma_device *core, u16 offset, u8 value);
 	void (*write16)(struct bcma_device *core, u16 offset, u16 value);
 	void (*write32)(struct bcma_device *core, u16 offset, u32 value);
+#ifdef CONFIG_BCMA_BLOCKIO
+	void (*block_read)(struct bcma_device *core, void *buffer,
+			   size_t count, u16 offset, u8 reg_width);
+	void (*block_write)(struct bcma_device *core, const void *buffer,
+			    size_t count, u16 offset, u8 reg_width);
+#endif
 	/* Agent ops */
 	u32 (*aread32)(struct bcma_device *core, u16 offset);
 	void (*awrite32)(struct bcma_device *core, u16 offset, u32 value);
@@ -117,6 +130,9 @@ struct bcma_device {
 	struct bcma_device_id id;
 
 	struct device dev;
+	struct device *dma_dev;
+
+	unsigned int irq;
 	bool dev_registered;
 
 	u8 core_index;
@@ -124,6 +140,9 @@ struct bcma_device {
 	u32 addr;
 	u32 wrap;
 
+	void __iomem *io_addr;
+	void __iomem *io_wrap;
+
 	void *drvdata;
 	struct list_head list;
 };
@@ -151,10 +170,9 @@ struct bcma_driver {
 };
 extern
 int __bcma_driver_register(struct bcma_driver *drv, struct module *owner);
-static inline int bcma_driver_register(struct bcma_driver *drv)
-{
-	return __bcma_driver_register(drv, THIS_MODULE);
-}
+#define bcma_driver_register(drv) \
+	__bcma_driver_register(drv, THIS_MODULE)
+
 extern void bcma_driver_unregister(struct bcma_driver *drv);
 
 struct bcma_bus {
@@ -176,49 +194,105 @@ struct bcma_bus {
 	struct bcma_device *mapped_core;
 	struct list_head cores;
 	u8 nr_cores;
+	u8 init_done:1;
 
 	struct bcma_drv_cc drv_cc;
 	struct bcma_drv_pci drv_pci;
+	struct bcma_drv_mips drv_mips;
+
+	/* We decided to share SPROM struct with SSB as long as we do not need
+	 * any hacks for BCMA. This simplifies drivers code. */
+	struct ssb_sprom sprom;
 };
 
-extern inline u32 bcma_read8(struct bcma_device *core, u16 offset)
+static inline u32 bcma_read8(struct bcma_device *core, u16 offset)
 {
 	return core->bus->ops->read8(core, offset);
 }
-extern inline u32 bcma_read16(struct bcma_device *core, u16 offset)
+static inline u32 bcma_read16(struct bcma_device *core, u16 offset)
 {
 	return core->bus->ops->read16(core, offset);
 }
-extern inline u32 bcma_read32(struct bcma_device *core, u16 offset)
+static inline u32 bcma_read32(struct bcma_device *core, u16 offset)
 {
 	return core->bus->ops->read32(core, offset);
 }
-extern inline
+static inline
 void bcma_write8(struct bcma_device *core, u16 offset, u32 value)
 {
 	core->bus->ops->write8(core, offset, value);
 }
-extern inline
+static inline
 void bcma_write16(struct bcma_device *core, u16 offset, u32 value)
 {
 	core->bus->ops->write16(core, offset, value);
 }
-extern inline
+static inline
 void bcma_write32(struct bcma_device *core, u16 offset, u32 value)
 {
 	core->bus->ops->write32(core, offset, value);
 }
-extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
+#ifdef CONFIG_BCMA_BLOCKIO
+static inline void bcma_block_read(struct bcma_device *core, void *buffer,
+				   size_t count, u16 offset, u8 reg_width)
+{
+	core->bus->ops->block_read(core, buffer, count, offset, reg_width);
+}
+static inline void bcma_block_write(struct bcma_device *core,
+				    const void *buffer, size_t count,
+				    u16 offset, u8 reg_width)
+{
+	core->bus->ops->block_write(core, buffer, count, offset, reg_width);
+}
+#endif
+static inline u32 bcma_aread32(struct bcma_device *core, u16 offset)
 {
 	return core->bus->ops->aread32(core, offset);
 }
-extern inline
+static inline
 void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value)
 {
 	core->bus->ops->awrite32(core, offset, value);
 }
 
+static inline void bcma_mask32(struct bcma_device *cc, u16 offset, u32 mask)
+{
+	bcma_write32(cc, offset, bcma_read32(cc, offset) & mask);
+}
+static inline void bcma_set32(struct bcma_device *cc, u16 offset, u32 set)
+{
+	bcma_write32(cc, offset, bcma_read32(cc, offset) | set);
+}
+static inline void bcma_maskset32(struct bcma_device *cc,
+				  u16 offset, u32 mask, u32 set)
+{
+	bcma_write32(cc, offset, (bcma_read32(cc, offset) & mask) | set);
+}
+static inline void bcma_mask16(struct bcma_device *cc, u16 offset, u16 mask)
+{
+	bcma_write16(cc, offset, bcma_read16(cc, offset) & mask);
+}
+static inline void bcma_set16(struct bcma_device *cc, u16 offset, u16 set)
+{
+	bcma_write16(cc, offset, bcma_read16(cc, offset) | set);
+}
+static inline void bcma_maskset16(struct bcma_device *cc,
+				  u16 offset, u16 mask, u16 set)
+{
+	bcma_write16(cc, offset, (bcma_read16(cc, offset) & mask) | set);
+}
+
 extern bool bcma_core_is_enabled(struct bcma_device *core);
+extern void bcma_core_disable(struct bcma_device *core, u32 flags);
 extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+extern void bcma_core_set_clockmode(struct bcma_device *core,
+				    enum bcma_clkmode clkmode);
+extern void bcma_core_pll_ctl(struct bcma_device *core, u32 req, u32 status,
+			      bool on);
+#define BCMA_DMA_TRANSLATION_MASK	0xC0000000
+#define  BCMA_DMA_TRANSLATION_NONE	0x00000000
+#define  BCMA_DMA_TRANSLATION_DMA32_CMT	0x40000000 /* Client Mode Translation for 32-bit DMA */
+#define  BCMA_DMA_TRANSLATION_DMA64_CMT	0x80000000 /* Client Mode Translation for 64-bit DMA */
+extern u32 bcma_core_dma_translation(struct bcma_device *core);
 
 #endif /* LINUX_BCMA_H_ */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -24,6 +24,7 @@
 #define   BCMA_CC_FLASHT_NONE		0x00000000	/* No flash */
 #define   BCMA_CC_FLASHT_STSER		0x00000100	/* ST serial flash */
 #define   BCMA_CC_FLASHT_ATSER		0x00000200	/* Atmel serial flash */
+#define   BCMA_CC_FLASHT_NFLASH		0x00000200
 #define	  BCMA_CC_FLASHT_PARA		0x00000700	/* Parallel flash */
 #define  BCMA_CC_CAP_PLLT		0x00038000	/* PLL Type */
 #define   BCMA_PLLTYPE_NONE		0x00000000
@@ -178,16 +179,9 @@
 #define BCMA_CC_PROG_CFG		0x0120
 #define BCMA_CC_PROG_WAITCNT		0x0124
 #define BCMA_CC_FLASH_CFG		0x0128
+#define  BCMA_CC_FLASH_CFG_DS		0x0010	/* Data size, 0=8bit, 1=16bit */
 #define BCMA_CC_FLASH_WAITCNT		0x012C
-#define BCMA_CC_CLKCTLST		0x01E0 /* Clock control and status (rev >= 20) */
-#define  BCMA_CC_CLKCTLST_FORCEALP	0x00000001 /* Force ALP request */
-#define  BCMA_CC_CLKCTLST_FORCEHT	0x00000002 /* Force HT request */
-#define  BCMA_CC_CLKCTLST_FORCEILP	0x00000004 /* Force ILP request */
-#define  BCMA_CC_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
-#define  BCMA_CC_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
-#define  BCMA_CC_CLKCTLST_HWCROFF	0x00000020 /* Force HW clock request off */
-#define  BCMA_CC_CLKCTLST_HAVEHT	0x00010000 /* HT available */
-#define  BCMA_CC_CLKCTLST_HAVEALP	0x00020000 /* APL available */
+/* 0x1E0 is defined as shared BCMA_CLKCTLST */
 #define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
 #define BCMA_CC_UART0_DATA		0x0300
 #define BCMA_CC_UART0_IMR		0x0304
@@ -209,6 +203,7 @@
 #define BCMA_CC_PMU_CTL			0x0600 /* PMU control */
 #define  BCMA_CC_PMU_CTL_ILP_DIV	0xFFFF0000 /* ILP div mask */
 #define  BCMA_CC_PMU_CTL_ILP_DIV_SHIFT	16
+#define  BCMA_CC_PMU_CTL_PLL_UPD	0x00000400
 #define  BCMA_CC_PMU_CTL_NOILPONW	0x00000200 /* No ILP on wait */
 #define  BCMA_CC_PMU_CTL_HTREQEN	0x00000100 /* HT req enable */
 #define  BCMA_CC_PMU_CTL_ALPREQEN	0x00000080 /* ALP req enable */
@@ -244,6 +239,66 @@
 #define BCMA_CC_REGCTL_DATA		0x065C
 #define BCMA_CC_PLLCTL_ADDR		0x0660
 #define BCMA_CC_PLLCTL_DATA		0x0664
+#define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
+#define BCMA_CC_SPROM_PCIE6		0x0830 /* SPROM beginning on PCIe rev >= 6 */
+
+/* Divider allocation in 4716/47162/5356 */
+#define BCMA_CC_PMU5_MAINPLL_CPU	1
+#define BCMA_CC_PMU5_MAINPLL_MEM	2
+#define BCMA_CC_PMU5_MAINPLL_SSB	3
+
+/* PLL usage in 4716/47162 */
+#define BCMA_CC_PMU4716_MAINPLL_PLL0	12
+
+/* PLL usage in 5356/5357 */
+#define BCMA_CC_PMU5356_MAINPLL_PLL0	0
+#define BCMA_CC_PMU5357_MAINPLL_PLL0	0
+
+/* 4706 PMU */
+#define BCMA_CC_PMU4706_MAINPLL_PLL0	0
+
+/* ALP clock on pre-PMU chips */
+#define BCMA_CC_PMU_ALP_CLOCK		20000000
+/* HT clock for systems with PMU-enabled chipcommon */
+#define BCMA_CC_PMU_HT_CLOCK		80000000
+
+/* PMU rev 5 (& 6) */
+#define BCMA_CC_PPL_P1P2_OFF		0
+#define BCMA_CC_PPL_P1_MASK		0x0f000000
+#define BCMA_CC_PPL_P1_SHIFT		24
+#define BCMA_CC_PPL_P2_MASK		0x00f00000
+#define BCMA_CC_PPL_P2_SHIFT		20
+#define BCMA_CC_PPL_M14_OFF		1
+#define BCMA_CC_PPL_MDIV_MASK		0x000000ff
+#define BCMA_CC_PPL_MDIV_WIDTH		8
+#define BCMA_CC_PPL_NM5_OFF		2
+#define BCMA_CC_PPL_NDIV_MASK		0xfff00000
+#define BCMA_CC_PPL_NDIV_SHIFT		20
+#define BCMA_CC_PPL_FMAB_OFF		3
+#define BCMA_CC_PPL_MRAT_MASK		0xf0000000
+#define BCMA_CC_PPL_MRAT_SHIFT		28
+#define BCMA_CC_PPL_ABRAT_MASK		0x08000000
+#define BCMA_CC_PPL_ABRAT_SHIFT		27
+#define BCMA_CC_PPL_FDIV_MASK		0x07ffffff
+#define BCMA_CC_PPL_PLLCTL_OFF		4
+#define BCMA_CC_PPL_PCHI_OFF		5
+#define BCMA_CC_PPL_PCHI_MASK		0x0000003f
+
+/* BCM4331 ChipControl numbers. */
+#define BCMA_CHIPCTL_4331_BT_COEXIST		BIT(0)	/* 0 disable */
+#define BCMA_CHIPCTL_4331_SECI			BIT(1)	/* 0 SECI is disabled (JATG functional) */
+#define BCMA_CHIPCTL_4331_EXT_LNA		BIT(2)	/* 0 disable */
+#define BCMA_CHIPCTL_4331_SPROM_GPIO13_15	BIT(3)	/* sprom/gpio13-15 mux */
+#define BCMA_CHIPCTL_4331_EXTPA_EN		BIT(4)	/* 0 ext pa disable, 1 ext pa enabled */
+#define BCMA_CHIPCTL_4331_GPIOCLK_ON_SPROMCS	BIT(5)	/* set drive out GPIO_CLK on sprom_cs pin */
+#define BCMA_CHIPCTL_4331_PCIE_MDIO_ON_SPROMCS	BIT(6)	/* use sprom_cs pin as PCIE mdio interface */
+#define BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5	BIT(7)	/* aband extpa will be at gpio2/5 and sprom_dout */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXCLKEN	BIT(8)	/* override core control on pipe_AuxClkEnable */
+#define BCMA_CHIPCTL_4331_OVR_PIPEAUXPWRDOWN	BIT(9)	/* override core control on pipe_AuxPowerDown */
+#define BCMA_CHIPCTL_4331_PCIE_AUXCLKEN		BIT(10)	/* pcie_auxclkenable */
+#define BCMA_CHIPCTL_4331_PCIE_PIPE_PLLDOWN	BIT(11)	/* pcie_pipe_pllpowerdown */
+#define BCMA_CHIPCTL_4331_BT_SHD0_ON_GPIO4	BIT(16)	/* enable bt_shd0 at gpio4 */
+#define BCMA_CHIPCTL_4331_BT_SHD1_ON_GPIO5	BIT(17)	/* enable bt_shd1 at gpio5 */
 
 /* Data for the PMU, if available.
  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
@@ -253,14 +308,37 @@ struct bcma_chipcommon_pmu {
 	u32 crystalfreq;	/* The active crystal frequency (in kHz) */
 };
 
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+struct bcma_pflash {
+	u8 buswidth;
+	u32 window;
+	u32 window_size;
+};
+
+struct bcma_serial_port {
+	void *regs;
+	unsigned long clockspeed;
+	unsigned int irq;
+	unsigned int baud_base;
+	unsigned int reg_shift;
+};
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
+
 struct bcma_drv_cc {
 	struct bcma_device *core;
 	u32 status;
 	u32 capabilities;
 	u32 capabilities_ext;
+	u8 setup_done:1;
 	/* Fast Powerup Delay constant */
 	u16 fast_pwrup_delay;
 	struct bcma_chipcommon_pmu pmu;
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+	struct bcma_pflash pflash;
+
+	int nr_serial_ports;
+	struct bcma_serial_port serial_ports[4];
+#endif /* CONFIG_BCMA_DRIVER_MIPS */
 };
 
 /* Register access */
@@ -281,6 +359,8 @@ extern void bcma_core_chipcommon_init(st
 extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
 extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
 
+void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
+
 extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
 					  u32 ticks);
 
@@ -299,4 +379,13 @@ u32 bcma_chipco_gpio_polarity(struct bcm
 /* PMU support */
 extern void bcma_pmu_init(struct bcma_drv_cc *cc);
 
+extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
+				  u32 value);
+extern void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset,
+				    u32 mask, u32 set);
+extern void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
+					u32 offset, u32 mask, u32 set);
+extern void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc,
+				       u32 offset, u32 mask, u32 set);
+
 #endif /* LINUX_BCMA_DRIVER_CC_H_ */
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -0,0 +1,51 @@
+#ifndef LINUX_BCMA_DRIVER_MIPS_H_
+#define LINUX_BCMA_DRIVER_MIPS_H_
+
+#define BCMA_MIPS_IPSFLAG		0x0F08
+/* which sbflags get routed to mips interrupt 1 */
+#define  BCMA_MIPS_IPSFLAG_IRQ1		0x0000003F
+#define  BCMA_MIPS_IPSFLAG_IRQ1_SHIFT	0
+/* which sbflags get routed to mips interrupt 2 */
+#define  BCMA_MIPS_IPSFLAG_IRQ2		0x00003F00
+#define  BCMA_MIPS_IPSFLAG_IRQ2_SHIFT	8
+/* which sbflags get routed to mips interrupt 3 */
+#define  BCMA_MIPS_IPSFLAG_IRQ3		0x003F0000
+#define  BCMA_MIPS_IPSFLAG_IRQ3_SHIFT	16
+/* which sbflags get routed to mips interrupt 4 */
+#define  BCMA_MIPS_IPSFLAG_IRQ4		0x3F000000
+#define  BCMA_MIPS_IPSFLAG_IRQ4_SHIFT	24
+
+/* MIPS 74K core registers */
+#define BCMA_MIPS_MIPS74K_CORECTL	0x0000
+#define BCMA_MIPS_MIPS74K_EXCEPTBASE	0x0004
+#define BCMA_MIPS_MIPS74K_BIST		0x000C
+#define BCMA_MIPS_MIPS74K_INTMASK_INT0	0x0014
+#define BCMA_MIPS_MIPS74K_INTMASK(int) \
+	((int) * 4 + BCMA_MIPS_MIPS74K_INTMASK_INT0)
+#define BCMA_MIPS_MIPS74K_NMIMASK	0x002C
+#define BCMA_MIPS_MIPS74K_GPIOSEL	0x0040
+#define BCMA_MIPS_MIPS74K_GPIOOUT	0x0044
+#define BCMA_MIPS_MIPS74K_GPIOEN	0x0048
+#define BCMA_MIPS_MIPS74K_CLKCTLST	0x01E0
+
+#define BCMA_MIPS_OOBSELOUTA30		0x100
+
+struct bcma_device;
+
+struct bcma_drv_mips {
+	struct bcma_device *core;
+	u8 setup_done:1;
+	unsigned int assigned_irqs;
+};
+
+#ifdef CONFIG_BCMA_DRIVER_MIPS
+extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+#else
+static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+#endif
+
+extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
+
+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+
+#endif /* LINUX_BCMA_DRIVER_MIPS_H_ */
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -85,5 +85,7 @@ struct bcma_drv_pci {
 #define pcicore_write32(pc, offset, val)	bcma_write32((pc)->core, offset, val)
 
 extern void bcma_core_pci_init(struct bcma_drv_pci *pc);
+extern int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc,
+				 struct bcma_device *core, bool enable);
 
 #endif /* LINUX_BCMA_DRIVER_PCI_H_ */
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -1,13 +1,38 @@
 #ifndef LINUX_BCMA_REGS_H_
 #define LINUX_BCMA_REGS_H_
 
+/* Some single registers are shared between many cores */
+/* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */
+#define BCMA_CLKCTLST			0x01E0 /* Clock control and status */
+#define  BCMA_CLKCTLST_FORCEALP		0x00000001 /* Force ALP request */
+#define  BCMA_CLKCTLST_FORCEHT		0x00000002 /* Force HT request */
+#define  BCMA_CLKCTLST_FORCEILP		0x00000004 /* Force ILP request */
+#define  BCMA_CLKCTLST_HAVEALPREQ	0x00000008 /* ALP available request */
+#define  BCMA_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
+#define  BCMA_CLKCTLST_HWCROFF		0x00000020 /* Force HW clock request off */
+#define  BCMA_CLKCTLST_EXTRESREQ	0x00000700 /* Mask of external resource requests */
+#define  BCMA_CLKCTLST_HAVEALP		0x00010000 /* ALP available */
+#define  BCMA_CLKCTLST_HAVEHT		0x00020000 /* HT available */
+#define  BCMA_CLKCTLST_BP_ON_ALP	0x00040000 /* RO: running on ALP clock */
+#define  BCMA_CLKCTLST_BP_ON_HT		0x00080000 /* RO: running on HT clock */
+#define  BCMA_CLKCTLST_EXTRESST		0x07000000 /* Mask of external resource status */
+/* Is there any BCM4328 on BCMA bus? */
+#define  BCMA_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
+#define  BCMA_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
+
 /* Agent registers (common for every core) */
-#define BCMA_IOCTL			0x0408
+#define BCMA_IOCTL			0x0408 /* IO control */
 #define  BCMA_IOCTL_CLK			0x0001
 #define  BCMA_IOCTL_FGC			0x0002
 #define  BCMA_IOCTL_CORE_BITS		0x3FFC
 #define  BCMA_IOCTL_PME_EN		0x4000
 #define  BCMA_IOCTL_BIST_EN		0x8000
+#define BCMA_IOST			0x0500 /* IO status */
+#define  BCMA_IOST_CORE_BITS		0x0FFF
+#define  BCMA_IOST_DMA64		0x1000
+#define  BCMA_IOST_GATED_CLK		0x2000
+#define  BCMA_IOST_BIST_ERROR		0x4000
+#define  BCMA_IOST_BIST_DONE		0x8000
 #define BCMA_RESET_CTL			0x0800
 #define  BCMA_RESET_CTL_RESET		0x0001
 
--- /dev/null
+++ b/include/linux/bcma/bcma_soc.h
@@ -0,0 +1,16 @@
+#ifndef LINUX_BCMA_SOC_H_
+#define LINUX_BCMA_SOC_H_
+
+#include <linux/bcma/bcma.h>
+
+struct bcma_soc {
+	struct bcma_bus bus;
+	struct bcma_device core_cc;
+	struct bcma_device core_mips;
+};
+
+int __init bcma_host_soc_register(struct bcma_soc *soc);
+
+int bcma_bus_register(struct bcma_bus *bus);
+
+#endif /* LINUX_BCMA_SOC_H_ */