openwrt-xburst/target/linux/brcm-2.4/files/arch/mips/bcm947xx/hndchipc.c

/*
 * BCM47XX support code for some chipcommon facilities (uart, jtagm)
 *
 * Copyright 2007, Broadcom Corporation
 * All Rights Reserved.
 * 
 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 *
 */

#include <typedefs.h>
#include <bcmdefs.h>
#include <osl.h>
#include <sbutils.h>
#include <bcmdevs.h>
#include <bcmnvram.h>
#include <sbconfig.h>
#include <sbchipc.h>
#include <sbextif.h>
#include <hndchipc.h>
#include <hndcpu.h>

/* debug/trace */
#define	CC_ERROR(args)

#ifdef BCMDBG
#define	CC_MSG(args)	printf args
#else
#define	CC_MSG(args)
#endif /* BCMDBG */

/* interested chipcommon interrupt source
 *  - GPIO
 *  - EXTIF
 *  - ECI
 *  - PMU
 *  - UART
 */
#define	MAX_CC_INT_SOURCE 5

/* chipc secondary isr info */
typedef struct {
	uint intmask;		/* int mask */
	cc_isr_fn isr;		/* secondary isr handler */
	void *cbdata;		/* pointer to private data */
} cc_isr_info_t;

static cc_isr_info_t cc_isr_desc[MAX_CC_INT_SOURCE];

/* chip common intmask */
static uint32 cc_intmask = 0;

static bool BCMINITFN(serial_exists) (osl_t * osh, uint8 * regs) {
	uint8 save_mcr, status1;

	save_mcr = R_REG(osh, &regs[UART_MCR]);
	W_REG(osh, &regs[UART_MCR], UART_MCR_LOOP | 0x0a);
	status1 = R_REG(osh, &regs[UART_MSR]) & 0xf0;
	W_REG(osh, &regs[UART_MCR], save_mcr);

	return (status1 == 0x90);
}

static void __init sb_extif_serial_init(sb_t * sbh, void *regs,
					sb_serial_init_fn add)
{
	osl_t *osh = sb_osh(sbh);
	extifregs_t *eir = (extifregs_t *) regs;
	sbconfig_t *sb;
	ulong base;
	uint irq;
	int i, n;

	/* Determine external UART register base */
	sb = (sbconfig_t *) ((ulong) eir + SBCONFIGOFF);
	base = EXTIF_CFGIF_BASE(sb_base(R_REG(osh, &sb->sbadmatch1)));

	/* Determine IRQ */
	irq = sb_irq(sbh);

	/* Disable GPIO interrupt initially */
	W_REG(osh, &eir->gpiointpolarity, 0);
	W_REG(osh, &eir->gpiointmask, 0);

	/* Search for external UARTs */
	n = 2;
	for (i = 0; i < 2; i++) {
		regs = (void *)REG_MAP(base + (i * 8), 8);
		if (serial_exists(osh, regs)) {
			/* Set GPIO 1 to be the external UART IRQ */
			W_REG(osh, &eir->gpiointmask, 2);
			/* XXXDetermine external UART clock */
			if (add)
				add(regs, irq, 13500000, 0);
		}
	}

	/* Add internal UART if enabled */
	if (R_REG(osh, &eir->corecontrol) & CC_UE)
		if (add)
			add((void *)&eir->uartdata, irq, sb_clock(sbh), 2);
}

/*
 * Initializes UART access. The callback function will be called once
 * per found UART.
 */
void BCMINITFN(sb_serial_init) (sb_t * sbh, sb_serial_init_fn add) {
	osl_t *osh;
	void *regs;
	chipcregs_t *cc;
	uint32 rev, cap, pll, baud_base, div;
	uint irq;
	int i, n;

	osh = sb_osh(sbh);

	regs = sb_setcore(sbh, SB_EXTIF, 0);
	if (regs) {
		sb_extif_serial_init(sbh, regs, add);
		return;
	}

	cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0);
	ASSERT(cc);

	/* Determine core revision and capabilities */
	rev = sbh->ccrev;
	cap = sbh->cccaps;
	pll = cap & CC_CAP_PLL_MASK;

	/* Determine IRQ */
	irq = sb_irq(sbh);

	if (pll == PLL_TYPE1) {
		/* PLL clock */
		baud_base = sb_clock_rate(pll,
					  R_REG(osh, &cc->clockcontrol_n),
					  R_REG(osh, &cc->clockcontrol_m2));
		div = 1;
	} else {
		/* 5354 chip common uart uses a constant clock
		 * frequency of 25MHz */
		if (sb_corerev(sbh) == 20) {
			/* Set the override bit so we don't divide it */
			W_REG(osh, &cc->corecontrol, CC_UARTCLKO);
			baud_base = 25000000;
		} else if (rev >= 11 && rev != 15) {
			/* Fixed ALP clock */
			baud_base = sb_alp_clock(sbh);
			div = 1;
			/* Turn off UART clock before switching clock source */
			if (rev >= 21)
				AND_REG(osh, &cc->corecontrol, ~CC_UARTCLKEN);
			/* Set the override bit so we don't divide it */
			OR_REG(osh, &cc->corecontrol, CC_UARTCLKO);
			if (rev >= 21)
				OR_REG(osh, &cc->corecontrol, CC_UARTCLKEN);
		} else if (rev >= 3) {
			/* Internal backplane clock */
			baud_base = sb_clock(sbh);
			div = 2;	/* Minimum divisor */
			W_REG(osh, &cc->clkdiv,
			      ((R_REG(osh, &cc->clkdiv) & ~CLKD_UART) | div));
		} else {
			/* Fixed internal backplane clock */
			baud_base = 88000000;
			div = 48;
		}

		/* Clock source depends on strapping if UartClkOverride is unset */
		if ((rev > 0)
		    && ((R_REG(osh, &cc->corecontrol) & CC_UARTCLKO) == 0)) {
			if ((cap & CC_CAP_UCLKSEL) == CC_CAP_UINTCLK) {
				/* Internal divided backplane clock */
				baud_base /= div;
			} else {
				/* Assume external clock of 1.8432 MHz */
				baud_base = 1843200;
			}
		}
	}

	/* Add internal UARTs */
	n = cap & CC_CAP_UARTS_MASK;
	for (i = 0; i < n; i++) {
		/* Register offset changed after revision 0 */
		if (rev)
			regs = (void *)((ulong) & cc->uart0data + (i * 256));
		else
			regs = (void *)((ulong) & cc->uart0data + (i * 8));

		if (add)
			add(regs, irq, baud_base, 0);
	}
}

#if 0
/*
 * Initialize jtag master and return handle for
 * jtag_rwreg. Returns NULL on failure.
 */
void *sb_jtagm_init(sb_t * sbh, uint clkd, bool exttap)
{
	void *regs;

	if ((regs = sb_setcore(sbh, SB_CC, 0)) != NULL) {
		chipcregs_t *cc = (chipcregs_t *) regs;
		uint32 tmp;

		/*
		 * Determine jtagm availability from
		 * core revision and capabilities.
		 */

		/*
		 * Corerev 10 has jtagm, but the only chip
		 * with it does not have a mips, and
		 * the layout of the jtagcmd register is
		 * different. We'll only accept >= 11.
		 */
		if (sbh->ccrev < 11)
			return (NULL);

		if ((sbh->cccaps & CC_CAP_JTAGP) == 0)
			return (NULL);

		/* Set clock divider if requested */
		if (clkd != 0) {
			tmp = R_REG(osh, &cc->clkdiv);
			tmp =
			    (tmp & ~CLKD_JTAG) | ((clkd << CLKD_JTAG_SHIFT) &
						  CLKD_JTAG);
			W_REG(osh, &cc->clkdiv, tmp);
		}

		/* Enable jtagm */
		tmp = JCTRL_EN | (exttap ? JCTRL_EXT_EN : 0);
		W_REG(osh, &cc->jtagctrl, tmp);
	}

	return (regs);
}

void sb_jtagm_disable(osl_t * osh, void *h)
{
	chipcregs_t *cc = (chipcregs_t *) h;

	W_REG(osh, &cc->jtagctrl, R_REG(osh, &cc->jtagctrl) & ~JCTRL_EN);
}

/*
 * Read/write a jtag register. Assumes a target with
 * 8 bit IR and 32 bit DR.
 */
#define	IRWIDTH		8	/* Default Instruction Register width */
#define	DRWIDTH		32	/* Default Data Register width */

uint32 jtag_rwreg(osl_t * osh, void *h, uint32 ir, uint32 dr)
{
	chipcregs_t *cc = (chipcregs_t *) h;
	uint32 tmp;

	W_REG(osh, &cc->jtagir, ir);
	W_REG(osh, &cc->jtagdr, dr);
	tmp = JCMD_START | JCMD_ACC_IRDR |
	    ((IRWIDTH - 1) << JCMD_IRW_SHIFT) | (DRWIDTH - 1);
	W_REG(osh, &cc->jtagcmd, tmp);
	while (((tmp = R_REG(osh, &cc->jtagcmd)) & JCMD_BUSY) == JCMD_BUSY) {
		/* OSL_DELAY(1); */
	}

	tmp = R_REG(osh, &cc->jtagdr);
	return (tmp);
}
#endif

/*
 * Interface to register chipc secondary isr
 */
bool
BCMINITFN(sb_cc_register_isr) (sb_t * sbh, cc_isr_fn isr, uint32 ccintmask,
			       void *cbdata) {
	bool done = FALSE;
	chipcregs_t *regs;
	uint origidx;
	uint i;

	/* Save the current core index */
	origidx = sb_coreidx(sbh);
	regs = sb_setcore(sbh, SB_CC, 0);
	ASSERT(regs);

	for (i = 0; i < MAX_CC_INT_SOURCE; i++) {
		if (cc_isr_desc[i].isr == NULL) {
			cc_isr_desc[i].isr = isr;
			cc_isr_desc[i].cbdata = cbdata;
			cc_isr_desc[i].intmask = ccintmask;
			done = TRUE;
			break;
		}
	}

	if (done) {
		cc_intmask = R_REG(sb_osh(sbh), &regs->intmask);
		cc_intmask |= ccintmask;
		W_REG(sb_osh(sbh), &regs->intmask, cc_intmask);
	}

	/* restore original coreidx */
	sb_setcoreidx(sbh, origidx);
	return done;
}

/* 
 * chipc primary interrupt handler
 */
void sb_cc_isr(sb_t * sbh, chipcregs_t * regs)
{
	uint32 ccintstatus;
	uint32 intstatus;
	uint32 i;

	/* prior to rev 21 chipc interrupt means uart and gpio */
	if (sbh->ccrev >= 21)
		ccintstatus = R_REG(sb_osh(sbh), &regs->intstatus) & cc_intmask;
	else
		ccintstatus = (CI_UART | CI_GPIO);

	for (i = 0; i < MAX_CC_INT_SOURCE; i++) {
		if ((cc_isr_desc[i].isr != NULL) &&
		    (intstatus = (cc_isr_desc[i].intmask & ccintstatus))) {
			(cc_isr_desc[i].isr) (cc_isr_desc[i].cbdata, intstatus);
		}
	}
}