mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-18 19:11:35 +02:00
106 lines
4.0 KiB
Diff
106 lines
4.0 KiB
Diff
|
--- a/ath/if_ath.c
|
||
|
|
+++ b/ath/if_ath.c
|
||
|
|
@@ -1452,6 +1452,23 @@
|
||
|
|
sc->sc_nstavaps++;
|
||
|
|
else if (opmode == IEEE80211_M_MONITOR)
|
||
|
|
sc->sc_nmonvaps++;
|
||
|
|
+
|
||
|
|
+
|
||
|
|
+ /* Driving the HAL in IBSS sometimes adapts the TSF and other timing registers
|
||
|
|
+ * from received beacons/probes. If that happens, expected TX interrupts may
|
||
|
|
+ * not occur until next reset. Which triggers the "lost beacon" tasklet.
|
||
|
|
+ * Resulting effectively in not sending packets for minutes. Because that only
|
||
|
|
+ * happens in large mesh networks, this mode needs to be activated by a kernel
|
||
|
|
+ * module parameter: hostap_for_ibss=1. Note that using this mode has side
|
||
|
|
+ * effects. Such as not supressing beacons/probe answers randomly when
|
||
|
|
+ * receiving other node beacons. It's recommended to lower the beacon interval
|
||
|
|
+ * then. When using an IBSS-VAP together with an HOSTAP-VAP, you may also need
|
||
|
|
+ * to re-trigger IBSS beacon generation after creating the HOSTAP-VAP by
|
||
|
|
+ * issueing "iwpriv athX bintval 1000".
|
||
|
|
+ */
|
||
|
|
+ if ((flags & IEEE80211_NO_STABEACONS) && (ic->ic_opmode == IEEE80211_M_IBSS))
|
||
|
|
+ sc->sc_opmode = HAL_M_HOSTAP;
|
||
|
|
+ else
|
||
|
|
/*
|
||
|
|
* Adhoc demo mode is a pseudo mode; to the HAL it's
|
||
|
|
* just IBSS mode and the driver doesn't use management
|
||
|
|
@@ -4279,7 +4296,8 @@
|
||
|
|
if (ic->ic_opmode != IEEE80211_M_HOSTAP && (dev->flags & IFF_PROMISC))
|
||
|
|
rfilt |= HAL_RX_FILTER_PROM;
|
||
|
|
if (ic->ic_opmode == IEEE80211_M_STA ||
|
||
|
|
- sc->sc_opmode == HAL_M_IBSS || /* NB: AHDEMO too */
|
||
|
|
+ ic->ic_opmode == IEEE80211_M_IBSS ||
|
||
|
|
+ ic->ic_opmode == IEEE80211_M_AHDEMO ||
|
||
|
|
(sc->sc_nostabeacons) || sc->sc_scanning ||
|
||
|
|
(ic->ic_opmode == IEEE80211_M_HOSTAP))
|
||
|
|
rfilt |= HAL_RX_FILTER_BEACON;
|
||
|
|
@@ -6433,6 +6451,33 @@
|
||
|
|
}
|
||
|
|
|
||
|
|
/*
|
||
|
|
+ * Advances (forwards/adds) a microsecond value to current chip's TSF registers
|
||
|
|
+ */
|
||
|
|
+
|
||
|
|
+/* from ath_info.c */
|
||
|
|
+#define AR5K_TSF_L32_5210 0x806c /* TSF (lower 32 bits) */
|
||
|
|
+#define AR5K_TSF_L32_5211 0x804c
|
||
|
|
+#define AR5K_TSF_L32 (ar_device(ah->ah_sc->devid) == 5210 ? \
|
||
|
|
+ AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
|
||
|
|
+
|
||
|
|
+#define AR5K_TSF_U32_5210 0x8070
|
||
|
|
+#define AR5K_TSF_U32_5211 0x8050
|
||
|
|
+#define AR5K_TSF_U32 (ar_device(ah->ah_sc->devid) == 5210 ? \
|
||
|
|
+ AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
|
||
|
|
+
|
||
|
|
+static inline void ath_hal_settsf64(struct ath_hal *ah, u_int64_t tsf_adv)
|
||
|
|
+{
|
||
|
|
+ ATH_HAL_LOCK_IRQ(ah->ah_sc);
|
||
|
|
+ ath_hal_set_function(__func__);
|
||
|
|
+ tsf_adv += ah->ah_getTsf64(ah);
|
||
|
|
+ OS_REG_WRITE(ah, AR5K_TSF_L32, 0ll);
|
||
|
|
+ OS_REG_WRITE(ah, AR5K_TSF_U32, (tsf_adv >> 32) & 0xffffffffll);
|
||
|
|
+ OS_REG_WRITE(ah, AR5K_TSF_L32, (tsf_adv >> 00) & 0xffffffffll);
|
||
|
|
+ ath_hal_set_function(NULL);
|
||
|
|
+ ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+/*
|
||
|
|
* Intercept management frames to collect beacon RSSI data and to do
|
||
|
|
* ibss merges. This function is called for all management frames,
|
||
|
|
* including those belonging to other BSS.
|
||
|
|
@@ -6485,10 +6530,19 @@
|
||
|
|
DPRINTF(sc, ATH_DEBUG_BEACON,
|
||
|
|
"Updated beacon timers\n");
|
||
|
|
}
|
||
|
|
- if ((sc->sc_opmode == HAL_M_IBSS) &&
|
||
|
|
- IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid) &&
|
||
|
|
- ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval)) {
|
||
|
|
- DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
|
||
|
|
+ if ((vap->iv_opmode == IEEE80211_M_IBSS) &&
|
||
|
|
+ (sc->sc_opmode == HAL_M_HOSTAP) &&
|
||
|
|
+ IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) {
|
||
|
|
+ /* In this mode, we drive the HAL in HOSTAP mode. Hence
|
||
|
|
+ * we do the IBSS merging in software. Also do not merge
|
||
|
|
+ * if the difference it too small. Otherwise we are playing
|
||
|
|
+ * tsf-pingpong with other vendors drivers */
|
||
|
|
+ beacon_tsf = le64_to_cpu(ni->ni_tstamp.tsf);
|
||
|
|
+ if (beacon_tsf > rtsf + 0xffff) {
|
||
|
|
+ ath_hal_settsf64(sc->sc_ah, beacon_tsf - rtsf);
|
||
|
|
+ ieee80211_ibss_merge(ni);
|
||
|
|
+ }
|
||
|
|
+ break;
|
||
|
|
}
|
||
|
|
/* NB: Fall Through */
|
||
|
|
case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
|
||
|
|
@@ -6561,6 +6615,10 @@
|
||
|
|
#endif
|
||
|
|
if (do_merge)
|
||
|
|
ieee80211_ibss_merge(ni);
|
||
|
|
+
|
||
|
|
+ if ((sc->sc_opmode == HAL_M_IBSS) &&
|
||
|
|
+ ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval))
|
||
|
|
+ DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
|
||
|
|
}
|
||
|
|
break;
|
||
|
|
}
|