qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-29 06:28:28 +02:00
Code
a66785b06c
openwrt-xburst/target/linux/xburst/files-2.6.27/drivers/net/jz4760_eth.h

1055 lines
40 KiB
C
Raw Normal View History

yet another patchset - 2.6.27 it's basically also provided by ingenic and nativly based on 2.6.27, adjusted to fit into the OpenWrt-environment
2009-08-18 13:44:38 +03:00
/*
* Jz4760 On-Chip ethernet driver.
*
* Copyright (C) 2005 - 2007 Ingenic Semiconductor Inc. Jason<xwang@ingenic.cn>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __JZ4760_ETH_H__
#define __JZ4760_ETH_H__
// ----------------------------------------------------------------------------------
// PE-MACMII registers (16-bit)
// ----------------------------------------------------------------------------------
#define ETH_MAC_MCR1 (ETHC_BASE + 0x00 )// MAC configuration register #1
#define ETH_MAC_MCR2 (ETHC_BASE + 0x04 )// MAC configuration register #2
#define ETH_MAC_IPGR (ETHC_BASE + 0x08 )// Back-to-Back Inter-Packet-Gap register
#define ETH_MAC_NIPGR (ETHC_BASE + 0x0c )// Non-Back-to-Back Inter-Packet-Gap register
#define ETH_MAC_CWR (ETHC_BASE + 0x10 )// Collision Window / Retry register
#define ETH_MAC_MFR (ETHC_BASE + 0x14 )// Maximum Frame register
#define ETH_MAC_PSR (ETHC_BASE + 0x18 )// PHY Support register (SMII / RMII / PMD / ENDEC)
#define ETH_MAC_TR (ETHC_BASE + 0x1c )// Test register
#define ETH_MAC_MCFGR (ETHC_BASE + 0x20 )// MII Mgmt Configuration
#define ETH_MAC_MCMDR (ETHC_BASE + 0x24 )// MII Mgmt Command
#define ETH_MAC_MADRR (ETHC_BASE + 0x28 )// MII Mgmt Address
#define ETH_MAC_MWTDR (ETHC_BASE + 0x2c )// MII Mgmt Write Data
#define ETH_MAC_MRDDR (ETHC_BASE + 0x30 )// MII Mgmt Read Data
#define ETH_MAC_MINDR (ETHC_BASE + 0x34 )// MII Mgmt Indicators
#define ETH_MAC_SA0 (ETHC_BASE + 0x40 )// Station Address
#define ETH_MAC_SA1 (ETHC_BASE + 0x44 )// Station Address
#define ETH_MAC_SA2 (ETHC_BASE + 0x48 )// Station Address
// Constants for ETH_MAC_MCR1 register
#define MCR1_SOFTRST (1 << 15) // Soft reset
#define MCR1_SMLTRST (1 << 14) // Simulation reset
#define MCR1_MCSRRST (1 << 11) // MAC Control Sublayer / Rx domain logic reset
#define MCR1_RFUNRST (1 << 10) // Rx Function logic reset
#define MCR1_MCSTRST (1 << 9) // MAC Control Sublayer / Tx domain logic reset
#define MCR1_TFUNRST (1 << 8) // Tx Function logic reset
#define MCR1_LB (1 << 4) // Tx interface loop back to Rx interface
#define MCR1_TFC (1 << 3) // Enable Tx flow control
#define MCR1_RFC (1 << 2) // Enable Rx flow control
#define MCR1_PARF (1 << 1) // Pass all receive frames
#define MCR1_RE (1 << 0) // Enable receive
// Constants for ETH_MAC_MCR2 register
#define MCR2_ED (1 << 14) // Defer to carrier indefinitely as per the Standard
#define MCR2_BPNB (1 << 13) // Back Pressure / No Backoff
#define MCR2_NB (1 << 12) // No Backoff
#define MCR2_LPE (1 << 9) // Long Preamble Enforcement
#define MCR2_PPE (1 << 8) // Pure Preamble Enforcement
#define MCR2_ADPE (1 << 7) // Auto-Detect Pad Enable
#define MCR2_VPE (1 << 6) // VLAN Pad Enable
#define MCR2_PCE (1 << 5) // Pad / CRC Enable
#define MCR2_CE (1 << 4) // CRC Enable
#define MCR2_DC (1 << 3) // Delayed CRC
#define MCR2_HFE (1 << 2) // Huge Frame Enable
#define MCR2_FLC (1 << 1) // Frame Length Checking
#define MCR2_FD (1 << 0) // Full-Duplex
// Contants for ETH_MAC_IPGR register
#define IPGR_MASK 0x007f // In Full-Duplex the recommended value is 0x15(21d)
// Contants for ETH_MAC_NIPGR register
#define NIPGR_P1_MASK 0x7f00 // The recommended value is 0xC(12d)
#define NIPGR_P2_MASK 0x007f // The recommended value is 0x12(18d)
// Contants for ETH_MAC_CWR register
#define CWR_CW_MASK 0x3f00 // Collision window, Default value is 0x37(55d)
#define CWR_RM_MASK 0x000f // Retry time, default & standard is 0xF(15d)
// Contants for ETH_MAC_PSR register
#define PSR_RIM (1 << 15) // Reset Interface Module
#define PSR_PM (1 << 12) // PHY Module
#define PSR_RPERMII (1 << 11) // Reset PERMII
#define PSR_OS (1 << 8) // Operating Speed
#define PSR_RPE100M (1 << 7) // Reset PE100M module
#define PSR_FQ (1 << 6) // Force Quiet
#define PSR_NC (1 << 5) // No Cipher
#define PSR_DLF (1 << 4) // Disable Link Fail
#define PSR_RPE10T (1 << 3) // Reset PE10T module
#define PSR_EJP (1 << 1) // Enable Jabber Protection
#define PSR_BM (1 << 0) // Bit Mode
// Contants for ETH_MAC_TR register
#define TR_TB (1 << 2) // Test Backpressure
#define TR_TP (1 << 1) // Test Pause
#define TR_SPQ (1 << 0) // Shortcut Pause Quanta
// Contants for ETH_MAC_MCFGR register
#define MCFGR_RST (1 << 15) // Reset MII Mgmt
#define MCFGR_CS_MASK 0x001c // Clock Reset
#define MCFGR_SP (1 << 1) // Suppress Preamble
#define MCFGR_SI (1 << 0) // Scan Increment
// Contants for ETH_MAC_MCMDR register
#define MCMDR_SCAN (1 << 1) // Cause MII Mgmt module to perform Read cycles continuously
#define MCMDR_READ (1 << 0) // Cause MII Mgmt module to perform single Read cycles
#define MII_SCAN (1 << 1)
#define MII_NO_SCAN 0
// Contants for ETH_MAC_MADRR register
#define MADRR_PA_MASK 0x1f00 // PHY Address
#define MADRR_RA_MASK 0x001f // Register Address
// Contants for ETH_MAC_MINDR register
#define MINDR_LF (1 << 3) // Link Fail
#define MINDR_NV (1 << 2) // Not Valid
#define MINDR_S (1 << 1) // Scanning
#define MINDR_BUSY (1 << 0) // Busy
// ----------------------------------------------------------------------------------
// M-AHBE DMA control and status registers (32-bit)
// ----------------------------------------------------------------------------------
#define ETH_DMA_TCR (ETHC_BASE + 0x180)// Transmit control
#define ETH_DMA_TDR (ETHC_BASE + 0x184)// Pointer to Transmit Descriptor
#define ETH_DMA_TSR (ETHC_BASE + 0x188)// Transmit Status
#define ETH_DMA_RCR (ETHC_BASE + 0x18c)// Receive Control
#define ETH_DMA_RDR (ETHC_BASE + 0x190)// Pointer to Receive Descriptor
#define ETH_DMA_RSR (ETHC_BASE + 0x194)// Receive Status
#define ETH_DMA_IMR (ETHC_BASE + 0x198)// Interrupt Mask
#define ETH_DMA_IR (ETHC_BASE + 0x19c)// Interrupts
/* ETH_DMA_IR = ETH_DMA_IMR _AND_ corresponding status flags which in ETH_DMA_TSR and ETH_DMA_RSR
*
* ETH_DMA_IR is read only, so the way to disable all interrupt is clear ETH_DMA_IMR or ETH_DMA_T(R)SR.
* Clear ETH_DMA_IMR is better. Then read status and call handle routine.
* Reset ETH_DMA_IMR after all interrupt-enabled status flags be cleared.
*/
// Constants for ETH_DMA_TCR register
#define TCR_ENABLE (1 << 0) // Enable DMA tx packet transfers
// Constants for ETH_DMA_TSR register
#define TSR_PKTSENT (1 << 0) // Indicates packet(s) have(has) been successfully txed
#define TSR_UNDERRUN (1 << 1) // Set whenever DMA controller reads a Empty Flag
#define TSR_BUSERR (1 << 3) // Indicates that DMA controller found tx bus error
#define TSR_PKTCNT_MASK (0xFF << 16) // Bit mask of tx packet counter
#define TSR_FLAGS (TSR_PKTSENT | TSR_UNDERRUN | TSR_BUSERR)
// Constants for ETH_DMA_RCR register
#define RCR_ENABLE (1 << 0) // Enable DMA rx packet transfers
// Constants for ETH_DMA_RSR register
#define RSR_PKTRECV (1 << 0) // Indicates packet(s) have(has) been successfully rxed
#define RSR_OVERFLOW (1 << 1) // Set whenever DMA controller reads a Non-Empty Flag
#define RSR_BUSERR (1 << 3) // Indicates that DMA controller found rx bus error
#define RSR_PKTCNT_MASK (0xFF << 16) // Bit mask of rx packet counter
#define RSR_FLAGS (RSR_PKTRECV | RSR_OVERFLOW | RSR_BUSERR)
// Constants for ETH_DMA_IMR register
#define IMR_PKTSENT (1 << 0) // Packet sent interrupt mask
#define IMR_UNDERRUN (1 << 1) // Underrun interrupt mask
#define IMR_TBUSERR (1 << 3) // Tx bus error interrupt mask
#define IMR_PKTRECV (1 << 4) // Packet received interrupt mask
#define IMR_OVERFLOW (1 << 6) // Overflow interrupt mask
#define IMR_RBUSERR (1 << 7) // Rx bus error interrupt mask
#define IMR_ALL_IRQ (IMR_UNDERRUN | IMR_TBUSERR | IMR_OVERFLOW | IMR_RBUSERR | IMR_PKTRECV)
//#define IMR_ALL_IRQ (IMR_UNDERRUN | IMR_TBUSERR | IMR_OVERFLOW | IMR_RBUSERR | IMR_PKTSENT | IMR_PKTRECV)
#define BURST_LEN_LO (1 << 27)
#define BURST_LEN_HI (1 << 28)
// Burst length configuration.
// HI LO Burst length
// 0 0 4
// 0 1 8
// 1 0 16
// 1 1 4
#define BURST_LEN_4 (0 << 27)
#define BURST_LEN_8 (1 << 27)
#define BURST_LEN_16 (2 << 27)
// ----------------------------------------------------------------------------------
// M-MIIFIF (32-bits) registers (32-bit)
// ----------------------------------------------------------------------------------
#define ETH_FIFO_CR0 (ETHC_BASE + 0x3c )// Configuration Register 0
#define ETH_FIFO_CR1 (ETHC_BASE + 0x4c )// Configuration Register 1
#define ETH_FIFO_CR2 (ETHC_BASE + 0x50 )// Configuration Register 2
#define ETH_FIFO_CR3 (ETHC_BASE + 0x54 )// Configuration Register 3
#define ETH_FIFO_CR4 (ETHC_BASE + 0x58 )// Configuration Register 4
#define ETH_FIFO_CR5 (ETHC_BASE + 0x5c )// Configuration Register 5
#define ETH_FIFO_RAR0 (ETHC_BASE + 0x60 )// RAM Access Register 0
#define ETH_FIFO_RAR1 (ETHC_BASE + 0x64 )// RAM Access Register 1
#define ETH_FIFO_RAR2 (ETHC_BASE + 0x68 )// RAM Access Register 2
#define ETH_FIFO_RAR3 (ETHC_BASE + 0x6c )// RAM Access Register 3
#define ETH_FIFO_RAR4 (ETHC_BASE + 0x70 )// RAM Access Register 4
#define ETH_FIFO_RAR5 (ETHC_BASE + 0x74 )// RAM Access Register 5
#define ETH_FIFO_RAR6 (ETHC_BASE + 0x78 )// RAM Access Register 6
#define ETH_FIFO_RAR7 (ETHC_BASE + 0x7c )// RAM Access Register 7
// Constants for ETH_FIFO_CR0 register
#define FTF_EN_RPLY (1 << 20) // Indicate whether mmiitfif_fab module is enabled
#define STF_EN_RPLY (1 << 19) // Indicate whether mmiitfif_sys module is enabled
#define FRF_EN_RPLY (1 << 18) // Indicate whether mmiirfif_fab module is enabled
#define SRF_EN_RPLY (1 << 17) // Indicate whether mmiirfif_sys module is enabled
#define WTM_EN_RPLY (1 << 16) // Indicate whether mmiitfif_wtm module is enabled
#define ALL_EN_RPLY (FTF_EN_RPLY | STF_EN_RPLY | FRF_EN_RPLY | SRF_EN_RPLY | WTM_EN_RPLY)
#define FTF_EN_REQ (1 << 12) // Request enable/disable -ing the mmiitfif_fab module
#define STF_EN_REQ (1 << 11) // Request enable/disable -ing the mmiitfif_sys module
#define FRF_EN_REQ (1 << 10) // Request enable/disable -ing the mmiirfif_fab module
#define SRF_EN_REQ (1 << 9) // Request enable/disable -ing the mmiirfif_sys module
#define WTM_EN_REQ (1 << 8) // Request enable/disable -ing the mmiitfif_wtm module
#define ALL_EN_REQ (FTF_EN_REQ | STF_EN_REQ | FRF_EN_REQ | SRF_EN_REQ | WTM_EN_REQ)
#define FTF_RST (1 << 4) // Reset mmiitfif_fab module
#define STF_RST (1 << 3) // Reset mmiitfif_sys module
#define FRT_RST (1 << 2) // Reset mmiirfif_fab module
#define SRF_RST (1 << 1) // Reset mmiirfif_sys module
#define WTM_RST (1 << 0) // Reset mmiitfif_wtm module
#define ALL_RST (FTF_RST | STF_RST | FRT_RST | SRF_RST | WTM_RST)
// Constants for ETH_FIFO_CR1 register
#define CFG_FR_TH_MASK (0x0fff << 16) // Fabric Receive Threshold mask
#define CFG_XOFF_RTX_MASK 0xffff // ??????????????
// Constants for ETH_FIFO_CR2 register
#define CFG_H_WM_MASK (0x1fff << 16) // Receive RAM high watermark mask
#define CFG_L_WM_MASK 0x1fff // Receive RAM low watermark mask
// Constants for ETH_FIFO_CR3 register
#define CFG_H_WM_FT_MASK (0x0fff << 16) // ??????????????
#define CFG_FT_TH_MASK 0xffff // Fabric Transmit Threshold mask
// Constants for ETH_FIFO_CR4 register
#define HST_FLT_RFRM_MASK 0xffff // Indicate drop condition
// Constants for ETH_FIFO_CR5 register
#define CFG_H_DPLX (1 << 22) // Enable Half-duplex backpressure as flow control mchm
#define CFG_SR_FULL (1 << 21) // Indicate whether FIFO storage has been met or exceeded
#define CFG_SR_FULL_CLR (1 << 20) // Clear CFG_SR_FULL bit
#define CLK_EN_MODE (1 << 19) //
#define HST_DR_LT_64 (1 << 18) // Drop the frame which less than 16 bit length
#define HST_FLT_RFRMDC_MASK (0xffff) // Indicate drop condition ... which don't care
// Constants for ETH_FIFO_RAR0 register
#define RAR0_HT_W_REQ (1 << 31) // Host Tx RAM write request
#define RAR0_HT_W_ACK (1 << 30) // Host Tx RAM write acknowledge
#define RAR0_HT_W_CD_MASK (0xff << 16) // Host Tx RAM write control data
#define RAR0_HT_W_ADDR_MASK (0x3ff << 0) // Host Tx RAM write address, [9:0] 10 bit, (4k RAM / 4 = 1024)
// Constants for ETH_FIFO_RAR2 register
#define RAR2_HT_R_REQ (1 << 31) // Host Tx RAM read request
#define RAR2_HT_R_ACK (1 << 30) // Host Tx RAM read acknowledge
#define RAR2_HT_R_CD_MASK (0xff << 16) // Host Tx RAM read control data
#define RAR2_HT_R_ADDR_MASK (0x3ff << 0) // Host Tx RAM read address, [9:0] 10 bit
// Constants for ETH_FIFO_RAR4 register
#define RAR4_HR_W_REQ (1 << 31) // Host Rx RAM write request
#define RAR4_HR_W_ACK (1 << 30) // Host Rx RAM write acknowledge
#define RAR4_HR_W_CD_MASK (0xf << 16) // Host Rx RAM write control data
#define RAR4_HR_W_ADDR_MASK (0x3ff << 0) // Host Rx RAM write address
// Constants for ETH_FIFO_RAR6 register
#define RAR4_HR_R_REQ (1 << 31) // Host Rx RAM read request
#define RAR4_HR_R_ACK (1 << 30) // Host Rx RAM read acknowledge
#define RAR4_HR_R_CD_MASK (0xf << 16) // Host Rx RAM read control data
#define RAR4_HR_R_ADDR_MASK (0x3ff << 0) // Host Rx RAM read address
// ----------------------------------------------------------------------------------
// PE-MSTAT registers (32-bit)
// ----------------------------------------------------------------------------------
// Several control signal
#define ETH_STAT_CR ETH_DMA_IMR // Use high 3 bits of ETH_DMA_IMR
#define STAT_EN (1 << 31) // Enable PE-MSTAT module
#define STAT_CL (1 << 30) // Clear counters, need voltage jump
#define STAT_AZ (1 << 29) // Enable Auto-Zero after read
// Combined transmit and receive counters. [17 : 0] available
#define ETH_STAT_TR64 (ETHC_BASE + 0x80 )// Tx & Rx 64 bytes frame counter
#define ETH_STAT_TR127 (ETHC_BASE + 0x84 )// Tx & Rx 65 ~ 127 bytes frame counter
#define ETH_STAT_TR255 (ETHC_BASE + 0x88 )// Tx & Rx 128 ~ 255 bytes frame counter
#define ETH_STAT_TR511 (ETHC_BASE + 0x8c )// Tx & Rx 256 ~ 511 bytes frame counter
#define ETH_STAT_TR1K (ETHC_BASE + 0x90 )// Tx & Rx 512 ~ 1023 bytes frame counter
#define ETH_STAT_TRMAX (ETHC_BASE + 0x94 )// Tx & Rx 1024 ~ 1518 bytes frame counter
#define ETH_STAT_TRMGV (ETHC_BASE + 0x98 )// Tx & Rx 1519 ~ 1522 bytes good VLAN frame counter
// Receive counters
#define ETH_STAT_RBYT (ETHC_BASE + 0x9c )// Rx Byte counter [23 : 0]
#define ETH_STAT_RPKT (ETHC_BASE + 0xa0 )// Rx Packet counter [17 : 0]
#define ETH_STAT_RFCS (ETHC_BASE + 0xa4 )// Rx FCS Error counter [11 : 0]
#define ETH_STAT_RMCA (ETHC_BASE + 0xa8 )// Rx Multicast packet counter [17 : 0]
#define ETH_STAT_RBCA (ETHC_BASE + 0xac )// Rx Broadcast packet counter [21 : 0]
#define ETH_STAT_RXCF (ETHC_BASE + 0xb0 )// Rx Control frame packet counter [17 : 0]
#define ETH_STAT_RXPF (ETHC_BASE + 0xb4 )// Rx PAUSE frame packet counter [11 : 0]
#define ETH_STAT_RXUO (ETHC_BASE + 0xb8 )// Rx Unkown OP code counter [11 : 0]
#define ETH_STAT_RALN (ETHC_BASE + 0xbc )// Rx Alignment Error counter [11 : 0]
#define ETH_STAT_RFLR (ETHC_BASE + 0xc0 )// Rx Frame Length Error counter [15 : 0]
#define ETH_STAT_RCDE (ETHC_BASE + 0xc4 )// Rx Code Error counter [11 : 0]
#define ETH_STAT_RCSE (ETHC_BASE + 0xc8 )// Rx Carrier Sense Error counter [11 : 0]
#define ETH_STAT_RUND (ETHC_BASE + 0xcc )// Rx Undersize packet counter [11 : 0]
#define ETH_STAT_ROVR (ETHC_BASE + 0xd0 )// Rx Oversize packet counter [11 : 0]
#define ETH_STAT_RFRG (ETHC_BASE + 0xd4 )// Rx Fragments counter [11 : 0]
#define ETH_STAT_RJBR (ETHC_BASE + 0xd8 )// Rx Jabber counter [11 : 0]
#define ETH_STAT_RDRP (ETHC_BASE + 0xdc )// Rx Drop [11 : 0]
// Transmit counters
#define ETH_STAT_TBYT (ETHC_BASE + 0xe0 )// Tx Byte counter [23 : 0]
#define ETH_STAT_TPKT (ETHC_BASE + 0xe4 )// Tx Packet counter [17 : 0]
#define ETH_STAT_TMCA (ETHC_BASE + 0xe8 )// Tx Multicast packet counter [17 : 0]
#define ETH_STAT_TBCA (ETHC_BASE + 0xec )// Tx Broadcast packet counter [17 : 0]
#define ETH_STAT_TXPF (ETHC_BASE + 0xf0 )// Tx PAUSE frame packet counter [11 : 0]
#define ETH_STAT_TDFR (ETHC_BASE + 0xf4 )// Tx Deferral packet counter [11 : 0]
#define ETH_STAT_TEDF (ETHC_BASE + 0xf8 )// Tx Excessive Deferral packet counter [11 : 0]
#define ETH_STAT_TSCL (ETHC_BASE + 0xfc )// Tx Single Collision packet counter [11 : 0]
#define ETH_STAT_TMCL (ETHC_BASE + 0x100)// Tx Multiple Collision packet counte [11 : 0]
#define ETH_STAT_TLCL (ETHC_BASE + 0x104)// Tx Late Collision packet counter [11 : 0]
#define ETH_STAT_TXCL (ETHC_BASE + 0x108)// Tx Excessive Collision packet counter [11 : 0]
#define ETH_STAT_TNCL (ETHC_BASE + 0x10c)// Tx Total Collision packet counter [12 : 0]
#define ETH_STAT_TPFH (ETHC_BASE + 0x110)// Tx PAUSE frames Honored counter [11 : 0]
#define ETH_STAT_TDRP (ETHC_BASE + 0x114)// Tx Drop frame counter [11 : 0]
#define ETH_STAT_TJBR (ETHC_BASE + 0x118)// Tx Jabber frame counter [11 : 0]
#define ETH_STAT_TFCS (ETHC_BASE + 0x11c)// Tx FCS Error counter [11 : 0]
#define ETH_STAT_TXCF (ETHC_BASE + 0x120)// Tx Control frame counter [11 : 0]
#define ETH_STAT_TOVR (ETHC_BASE + 0x124)// Tx Oversize frame counter [11 : 0]
#define ETH_STAT_TUND (ETHC_BASE + 0x128)// Tx Undersize frame counter [11 : 0]
#define ETH_STAT_TFRG (ETHC_BASE + 0x12c)// Tx Fragments frame counter [11 : 0]
// Carry registers
#define ETH_STAT_CAR1 (ETHC_BASE + 0x130)// Carry Register 1
#define ETH_STAT_CAR2 (ETHC_BASE + 0x134)// Carry Register 2
#define ETH_STAT_CARM1 (ETHC_BASE + 0x138)// Carry Mask Register 1
#define ETH_STAT_CARM2 (ETHC_BASE + 0x13c)// Carry Mask Register 2
// Constants for ETH_STAT_CAR*
#define CAR1_TR64 (1 << 31)
#define CAR1_TR127 (1 << 30)
#define CAR1_TR255 (1 << 29)
#define CAR1_TR511 (1 << 28)
#define CAR1_TR1K (1 << 27)
#define CAR1_TRMAX (1 << 26)
#define CAR1_TRMGV (1 << 25)
#define CAR1_RBY (1 << 16)
#define CAR1_RPK (1 << 15)
#define CAR1_RFC (1 << 14)
#define CAR1_RMC (1 << 13)
#define CAR1_RBC (1 << 12)
#define CAR1_RXC (1 << 11)
#define CAR1_RXP (1 << 10)
#define CAR1_RXU (1 << 9)
#define CAR1_RAL (1 << 8)
#define CAR1_RFL (1 << 7)
#define CAR1_RCD (1 << 6)
#define CAR1_RCS (1 << 5)
#define CAR1_RUN (1 << 4)
#define CAR1_ROV (1 << 3)
#define CAR1_RFR (1 << 2)
#define CAR1_RJB (1 << 1)
#define CAR1_RDR (1 << 0)
#define CAR2_TJB (1 << 19)
#define CAR2_TFC (1 << 18)
#define CAR2_TCF (1 << 17)
#define CAR2_TOV (1 << 16)
#define CAR2_TUN (1 << 15)
#define CAR2_TFG (1 << 14)
#define CAR2_TBY (1 << 13)
#define CAR2_TPK (1 << 12)
#define CAR2_TMC (1 << 11)
#define CAR2_TBC (1 << 10)
#define CAR2_TPF (1 << 9)
#define CAR2_TDF (1 << 8)
#define CAR2_TED (1 << 7)
#define CAR2_TSC (1 << 6)
#define CAR2_TMA (1 << 5)
#define CAR2_TLC (1 << 4)
#define CAR2_TXC (1 << 3)
#define CAR2_TNC (1 << 2)
#define CAR2_TPH (1 << 1)
#define CAR2_TDP (1 << 0)
#define CARM1_TR64 (1 << 31)
#define CARM1_TR127 (1 << 30)
#define CARM1_TR255 (1 << 29)
#define CARM1_TR511 (1 << 28)
#define CARM1_TR1K (1 << 27)
#define CARM1_TRMAX (1 << 26)
#define CARM1_TRMGV (1 << 25)
#define CARM1_RBY (1 << 16)
#define CARM1_RPK (1 << 15)
#define CARM1_RFC (1 << 14)
#define CARM1_RMC (1 << 13)
#define CARM1_RBC (1 << 12)
#define CARM1_RXC (1 << 11)
#define CARM1_RXP (1 << 10)
#define CARM1_RXU (1 << 9)
#define CARM1_RAL (1 << 8)
#define CARM1_RFL (1 << 7)
#define CARM1_RCD (1 << 6)
#define CARM1_RCS (1 << 5)
#define CARM1_RUN (1 << 4)
#define CARM1_ROV (1 << 3)
#define CARM1_RFR (1 << 2)
#define CARM1_RJB (1 << 1)
#define CARM1_RDR (1 << 0)
#define CARM2_TJB (1 << 19)
#define CARM2_TFC (1 << 18)
#define CARM2_TCF (1 << 17)
#define CARM2_TOV (1 << 16)
#define CARM2_TUN (1 << 15)
#define CARM2_TFG (1 << 14)
#define CARM2_TBY (1 << 13)
#define CARM2_TPK (1 << 12)
#define CARM2_TMC (1 << 11)
#define CARM2_TBC (1 << 10)
#define CARM2_TPF (1 << 9)
#define CARM2_TDF (1 << 8)
#define CARM2_TED (1 << 7)
#define CARM2_TSC (1 << 6)
#define CARM2_TMA (1 << 5)
#define CARM2_TLC (1 << 4)
#define CARM2_TXC (1 << 3)
#define CARM2_TNC (1 << 2)
#define CARM2_TPH (1 << 1)
#define CARM2_TDP (1 << 0)
// ----------------------------------------------------------------------------------
// PE-SAL registers (32-bit)
// ----------------------------------------------------------------------------------
#define ETH_SAL_AFR (ETHC_BASE + 0x1a0)// Address Filter Register
#define ETH_SAL_HT1 (ETHC_BASE + 0x1a4)// Hash Table [64 : 32]
#define ETH_SAL_HT2 (ETHC_BASE + 0x1a8)// Hash Table [31 : 0 ]
// Constants for ETH_SAL_AFR
#define AFR_PRO (1 << 3) // Promiscuous mode
#define AFR_PRM (1 << 2) // Accept Multicast
#define AFR_AMC (1 << 1) // Accept Multicast qualified
#define AFR_ABC (1 << 0) // Accept Broadcast
// ----------------------------------------------------------------------------------
// MISC definition
// ----------------------------------------------------------------------------------
// Receive Status Vector
#define RSV_RVTD (1 << 30) // Receive VLAN Type detected
#define RSV_RUO (1 << 29) // Receive Unsupported Op-code
#define RSV_RPCF (1 << 28) // Receive Pause Control Frame
#define RSV_RCF (1 << 27) // Receive Control Frame
#define RSV_DN (1 << 26) // Dribble Nibble
#define RSV_BP (1 << 25) // Broadcast Packet
#define RSV_MP (1 << 24) // Multicast Packet
#define RSV_OK (1 << 23) // Receive OK
#define RSV_LOR (1 << 22) // Length Out of Range
#define RSV_LCE (1 << 21) // Length Check Error
#define RSV_CRCE (1 << 20) // CRC Error
#define RSV_RCV (1 << 19) // Receive Code Violation
#define RSV_CEPS (1 << 18) // Carrier Event Previously Seen
#define RSV_REPS (1 << 17) // RXDV Event Previously Seen
#define RSV_PPI (1 << 16) // Packet Previously Ignored
// ----------------------------------------------------------------------------------
// MII Registers and Definitions
// ----------------------------------------------------------------------------------
#define MII_BMCR 0x00 /* MII Management Control Register */
#define MII_BMSR 0x01 /* MII Management Status Register */
#define MII_ID1 0x02 /* PHY Identifier Register 0 */
#define MII_ID2 0x03 /* PHY Identifier Register 1 */
#define MII_ANAR 0x04 /* Auto Negotiation Advertisement */
#define MII_ANLPAR 0x05 /* Auto Negotiation Link Partner Ability */
#define MII_ANER 0x06 /* Auto Negotiation Expansion */
#define MII_ANP 0x07 /* Auto Negotiation Next Page TX */
#define MII_DSCR 0x10 /* Davicom Specified Configration Register */
#define MII_DSCSR 0x11 /* Davicom Specified Configration/Status Register */
#define MII_10BTCSR 0x12 /* 10base-T Specified Configration/Status Register */
#define MII_PREAMBLE 0xffffffff /* MII Management Preamble */
#define MII_TEST 0xaaaaaaaa /* MII Test Signal */
#define MII_STRD 0x06 /* Start of Frame+Op Code: use low nibble */
#define MII_STWR 0x0a /* Start of Frame+Op Code: use low nibble */
// MII Management Control Register
#define MII_CR_RST 0x8000 /* RESET the PHY chip */
#define MII_CR_LPBK 0x4000 /* Loopback enable */
#define MII_CR_SPD 0x2000 /* 0: 10Mb/s; 1: 100Mb/s */
#define MII_CR_10 0x0000 /* Set 10Mb/s */
#define MII_CR_100 0x2000 /* Set 100Mb/s */
#define MII_CR_ASSE 0x1000 /* Auto Speed Select Enable */
#define MII_CR_PD 0x0800 /* Power Down */
#define MII_CR_ISOL 0x0400 /* Isolate Mode */
#define MII_CR_RAN 0x0200 /* Restart Auto Negotiation */
#define MII_CR_FDM 0x0100 /* Full Duplex Mode */
#define MII_CR_CTE 0x0080 /* Collision Test Enable */
// MII Management Status Register
#define MII_SR_T4C 0x8000 /* 100BASE-T4 capable */
#define MII_SR_TXFD 0x4000 /* 100BASE-TX Full Duplex capable */
#define MII_SR_TXHD 0x2000 /* 100BASE-TX Half Duplex capable */
#define MII_SR_TFD 0x1000 /* 10BASE-T Full Duplex capable */
#define MII_SR_THD 0x0800 /* 10BASE-T Half Duplex capable */
#define MII_SR_ASSC 0x0020 /* Auto Speed Selection Complete*/
#define MII_SR_RFD 0x0010 /* Remote Fault Detected */
#define MII_SR_ANC 0x0008 /* Auto Negotiation capable */
#define MII_SR_LKS 0x0004 /* Link Status */
#define MII_SR_JABD 0x0002 /* Jabber Detect */
#define MII_SR_XC 0x0001 /* Extended Capabilities */
// MII Management Auto Negotiation Advertisement Register
#define MII_ANAR_TAF 0x03e0 /* Technology Ability Field */
#define MII_ANAR_T4AM 0x0200 /* T4 Technology Ability Mask */
#define MII_ANAR_TXAM 0x0180 /* TX Technology Ability Mask */
#define MII_ANAR_FDAM 0x0140 /* Full Duplex Technology Ability Mask */
#define MII_ANAR_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */
#define MII_ANAR_100M 0x0380 /* 100Mb Technology Ability Mask */
#define MII_ANAR_10M 0x0060 /* 10Mb Technology Ability Mask */
#define MII_ANAR_CSMA 0x0001 /* CSMA-CD Capable */
// MII Management Auto Negotiation Remote End Register
#define MII_ANLPAR_NP 0x8000 /* Next Page (Enable) */
#define MII_ANLPAR_ACK 0x4000 /* Remote Acknowledge */
#define MII_ANLPAR_RF 0x2000 /* Remote Fault */
#define MII_ANLPAR_TAF 0x03e0 /* Technology Ability Field */
#define MII_ANLPAR_T4AM 0x0200 /* T4 Technology Ability Mask */
#define MII_ANLPAR_TXAM 0x0180 /* TX Technology Ability Mask */
#define MII_ANLPAR_FDAM 0x0140 /* Full Duplex Technology Ability Mask */
#define MII_ANLPAR_HDAM 0x02a0 /* Half Duplex Technology Ability Mask */
#define MII_ANLPAR_100M 0x0380 /* 100Mb Technology Ability Mask */
#define MII_ANLPAR_10M 0x0060 /* 10Mb Technology Ability Mask */
#define MII_ANLPAR_CSMA 0x0001 /* CSMA-CD Capable */
// Media / mode state machine definitions
// User selectable:
#define TP 0x0040 /* 10Base-T (now equiv to _10Mb) */
#define TP_NW 0x0002 /* 10Base-T with Nway */
#define BNC 0x0004 /* Thinwire */
#define AUI 0x0008 /* Thickwire */
#define BNC_AUI 0x0010 /* BNC/AUI on DC21040 indistinguishable */
#define _10Mb 0x0040 /* 10Mb/s Ethernet */
#define _100Mb 0x0080 /* 100Mb/s Ethernet */
#define AUTO 0x4000 /* Auto sense the media or speed */
// Internal states
#define NC 0x0000 /* No Connection */
#define ANS 0x0020 /* Intermediate AutoNegotiation State */
#define SPD_DET 0x0100 /* Parallel speed detection */
#define INIT 0x0200 /* Initial state */
#define EXT_SIA 0x0400 /* External SIA for motherboard chip */
#define ANS_SUSPECT 0x0802 /* Suspect the ANS (TP) port is down */
#define TP_SUSPECT 0x0803 /* Suspect the TP port is down */
#define BNC_AUI_SUSPECT 0x0804 /* Suspect the BNC or AUI port is down */
#define EXT_SIA_SUSPECT 0x0805 /* Suspect the EXT SIA port is down */
#define BNC_SUSPECT 0x0806 /* Suspect the BNC port is down */
#define AUI_SUSPECT 0x0807 /* Suspect the AUI port is down */
#define MII 0x1000 /* MII on the 21143 */
// ----------------------------------------------------------------------------------
// Device data and structure
// ----------------------------------------------------------------------------------
#define READ_COMMAND (SIOCDEVPRIVATE+4)
#define WRITE_COMMAND (SIOCDEVPRIVATE+5)
#define GETDRIVERINFO (SIOCDEVPRIVATE+6)
#define ETH_TX_TIMEOUT (6*HZ)
#define RX_BUF_SIZE (1536 + 64)
#define NUM_RX_DESCS 64
#define NUM_TX_DESCS 16
#define MAX_WAIT 2000
#define STAT_INTERVAL HZ * 3
// Constants for DMA descriptor
#define EMPTY_FLAG_MASK (1 << 31)
#define FTPP_FLAGS_MASK (0x1f << 16)
#define FTCFRM_MASK (1 << 20)
#define FTPP_PADMODE_MASK (0x3 << 18)
#define FTPP_GENFCS_MASK (1 << 17)
#define FTPP_EN_MASK (1 << 16)
#define PKT_SIZE_MASK (0x0FFF)
/*
static const char *media_types[] = {
"10BaseT-HD ", "10BaseT-FD ","100baseTx-HD ",
"100baseTx-FD", "100baseT4", 0
};
*/
typedef struct {
unsigned int pkt_addr; // phy addr
unsigned int pkt_size; // include empty flag
unsigned int next_desc; // phy addr
unsigned int for_align; // for 4-word alignment
} jz_desc_t;
enum counters{
// CNT_TR64,
// CNT_TR127,
// CNT_TR255,
// CNT_TR511,
// CNT_TR1K,
// CNT_TRMAX,
// CNT_TRMGV,
CNT_RBYT,
CNT_RPKT,
CNT_RFCS,
CNT_RMCA,
// CNT_RBCA,
// CNT_RXCF,
// CNT_RXPF,
// CNT_RXUO,
// CNT_RALN,
// CNT_RFLR,
// CNT_RCDE,
// CNT_RCSE,
// CNT_RUND,
// CNT_ROVR,
// CNT_RFRG,
// CNT_RJBR,
CNT_RDRP,
CNT_TBYT,
CNT_TPKT,
// CNT_TMCA,
// CNT_TBCA,
// CNT_TXPF,
// CNT_TDFR,
// CNT_TEDF,
// CNT_TSCL,
// CNT_TMCL,
// CNT_TLCL,
// CNT_TXCL,
CNT_TNCL,
// CNT_TPFH,
CNT_TDRP,
// CNT_TJBR,
CNT_TFCS,
// CNT_TXCF,
// CNT_TOVR,
// CNT_TUND,
// CNT_TFRG,
STAT_CNT_NUM
};
/* Allocate by alloc_etherdev, which could ensure the struct was 32-byte align */
struct jz_eth_private {
jz_desc_t tx_ring[NUM_TX_DESCS]; /* transmit descriptors, 4-word align */
jz_desc_t rx_ring[NUM_RX_DESCS]; /* receive descriptors, 4-word align */
dma_addr_t dma_tx_ring; /* bus address of tx ring */
dma_addr_t dma_rx_ring; /* bus address of rx ring */
dma_addr_t dma_rx_buf; /* DMA address of rx buffer */
unsigned int vaddr_rx_buf; /* virtual address of rx buffer */
unsigned int rx_head; /* first rx descriptor */
unsigned int tx_head; /* first tx descriptor */
unsigned int tx_tail; /* last unacked transmit packet */
unsigned int tx_full; /* transmit buffers are full */
struct sk_buff *tx_skb[NUM_TX_DESCS]; /* skbuffs for packets to transmit */
struct net_device_stats stats;
unsigned int carry_counters[STAT_CNT_NUM];
spinlock_t lock;
int media; /* Media (eg TP), mode (eg 100B)*/
int full_duplex; /* Current duplex setting */
int link_state;
char phys[32]; /* List of attached PHY devices */
char valid_phy; /* Current linked phy-id with MAC */
int mii_phy_cnt;
int phy_type; /* 1-RTL8309,0-DVCOM */
struct ethtool_cmd ecmds[32];
u16 advertising; /* NWay media advertisement */
struct task_struct *thread; /* Link cheak thread */
int thread_die;
struct completion thr_exited;
wait_queue_head_t thr_wait;
struct pm_dev *pmdev;
};
// ----------------------------------------------------------------------------------
// Operation defination
// ----------------------------------------------------------------------------------
// Operations of ETH DMA
#define __eth_dma_tx_enable() \
do { \
REG32(ETH_DMA_TCR) |= TCR_ENABLE; \
} while(0)
#define __eth_dma_tx_disable() \
do { \
REG32(ETH_DMA_TCR) &= ~TCR_ENABLE; \
} while(0)
#define __eth_dma_set_burst_len(len_macro) \
do { \
REG32(ETH_DMA_IMR) &= ~(BURST_LEN_LO | BURST_LEN_HI); \
REG32(ETH_DMA_IMR) |= (len_macro); \
} while(0)
#define __eth_set_tx_desc_addr(desc_addr) \
do { \
REG32(ETH_DMA_TDR) = desc_addr; \
} while(0)
#define __eth_get_flag_pkt_sent() (REG32(ETH_DMA_TSR) & TSR_PKTSENT)
#define __eth_get_flag_underrun() (REG32(ETH_DMA_TSR) & TSR_UNDERRUN)
#define __eth_get_flag_tx_bus_err() (REG32(ETH_DMA_TSR) & TSR_BUSERR)
#define __eth_get_tx_pkt_cnt() ((REG32(ETH_DMA_TSR) & TSR_PKTCNT_MASK) >> 0x10)
#define __eth_reduce_pkt_sent_cnt() (REG32(ETH_DMA_TSR) |= TSR_PKTSENT)
#define __eth_clear_flag_underrun() (REG32(ETH_DMA_TSR) |= TSR_UNDERRUN)
#define __eth_clear_flag_tx_bus_err() (REG32(ETH_DMA_TSR) |= TSR_BUSERR)
#define __eth_clear_tx_pkt_cnt() \
do { \
unsigned int tmp_cnt = __eth_get_tx_pkt_cnt(); \
for (; tmp_cnt > 0; tmp_cnt--) \
__eth_reduce_pkt_sent_cnt(); \
} while(0)
#define __eth_dma_rx_enable() \
do { \
REG32(ETH_DMA_RCR) |= RCR_ENABLE; \
} while(0)
#define __eth_dma_rx_disable() \
do { \
REG32(ETH_DMA_RCR) &= ~RCR_ENABLE; \
} while(0)
#define __eth_set_rx_desc_addr(desc_addr) \
do { \
REG32(ETH_DMA_RDR) = desc_addr; \
} while(0)
#define __eth_get_flag_pkt_recv() (REG32(ETH_DMA_RSR) & RSR_PKTRECV)
#define __eth_get_flag_overflow() (REG32(ETH_DMA_RSR) & RSR_OVERFLOW)
#define __eth_get_flag_rx_bus_err() (REG32(ETH_DMA_RSR) & RSR_BUSERR)
#define __eth_get_rx_pkt_cnt() ((REG32(ETH_DMA_RSR) & RSR_PKTCNT_MASK) >> 0x10)
#define __eth_reduce_pkt_recv_cnt() (REG32(ETH_DMA_RSR) |= RSR_PKTRECV)
#define __eth_clear_flag_overflow() (REG32(ETH_DMA_RSR) |= RSR_OVERFLOW)
#define __eth_clear_flag_rx_bus_err() (REG32(ETH_DMA_RSR) |= RSR_BUSERR)
#define __eth_clear_rx_pkt_cnt() \
do { \
unsigned int tmp_cnt = __eth_get_rx_pkt_cnt(); \
for (; tmp_cnt > 0; tmp_cnt--) \
__eth_reduce_pkt_recv_cnt(); \
} while(0)
#define __eth_clear_rx_flags() \
do { \
/*__eth_clear_rx_pkt_cnt();*/ \
REG32(ETH_DMA_RSR) = RSR_OVERFLOW | RSR_BUSERR; \
} while(0)
#define __eth_clear_tx_flags() \
do { \
/*__eth_clear_tx_pkt_cnt();*/ \
REG32(ETH_DMA_TSR) = TSR_UNDERRUN | TSR_BUSERR; \
} while(0)
#define __eth_enable_irq() \
do { \
REG32(ETH_DMA_IMR) |= IMR_ALL_IRQ; \
} while(0)
#define __eth_disable_irq() \
do { \
REG32(ETH_DMA_IMR) &= ~IMR_ALL_IRQ; \
} while(0)
#define __eth_enable() \
do { \
__eth_dma_tx_enable(); \
__eth_dma_rx_enable(); \
} while(0)
#define __eth_disable() \
do { \
__eth_dma_tx_disable(); \
__eth_dma_rx_disable(); \
} while(0)
#define __eth_set_mac_address(b1, b2, b3, b4, b5, b6) \
do { \
REG16(ETH_MAC_SA0) = ((b1) << 8) | ((b2) & 0xff); \
REG16(ETH_MAC_SA1) = ((b3) << 8) | ((b4) & 0xff); \
REG16(ETH_MAC_SA2) = ((b5) << 8) | ((b6) & 0xff); \
} while(0)
// Operations of ETH MAC registers
#define __mac_reset() \
do { \
REG16(ETH_MAC_MCR1) |= MCR1_SOFTRST; \
udelay(1000); \
REG16(ETH_MAC_MCR1) &= ~MCR1_SOFTRST; \
} while(0)
#define __mac_get_IPGR() (REG16(ETH_MAC_IPGR) & IPGR_MASK)
#define __mac_set_IPGR(ipgt) \
do { \
REG16(ETH_MAC_IPGR) = ipgt; \
} while(0)
#define __mac_get_NIPGR1() ((REG16(ETH_MAC_NIPGR) & NIPGR_P1_MASK) >> 8)
#define __mac_set_NIPGR1(v1) \
do { \
REG16(ETH_MAC_NIPGR) |= ((v1) << 8) & NIPGR_P1_MASK; \
} while(0)
#define __mac_get_NIPGR2() (REG16(ETH_MAC_NIPGR) & NIPGR_P2_MASK)
#define __mac_set_NIPGR2(v2) \
do { \
REG16(ETH_MAC_NIPGR) |= (v2) & NIPGR_P2_MASK; \
} while(0)
#define __mac_get_collision_window() ((REG16(ETH_MAC_CWR) & CWR_CW_MASK) >> 8)
#define __mac_set_collision_window(cw) \
do { \
REG16(ETH_MAC_CWR) |= ((cw) << 8) & CWR_CW_MASK; \
} while(0)
#define __mac_get_retx_maximum() (REG16(ETH_MAC_CWR) & CWR_RM_MASK)
#define __mac_set_retx_maximum(rm) \
do { \
REG16(ETH_MAC_CWR) |= (rm) & CWR_RM_MASK; \
} while(0)
#define __mac_get_max_frame_length() (REG16(ETH_MAC_MFR))
#define __mac_set_max_frame_length(len) \
do { \
REG16(ETH_MAC_MFR) = len; \
} while(0)
#define __mac_set_mii_clk(_clkdiv) \
do { \
REG16(ETH_MAC_MCFGR) |= ((_clkdiv) << 2) & MCFGR_CS_MASK; \
} while(0)
#define __mac_set_mii_address(pa, ra) \
do { \
REG16(ETH_MAC_MADRR) = \
(((pa) << 8)& MADRR_PA_MASK)|((ra) & MADRR_RA_MASK); \
} while(0)
#define __mac_send_mii_read_cmd(pa, ra, scan) \
do { \
__mac_set_mii_address(pa, ra); \
REG16(ETH_MAC_MCMDR) &= ~MCMDR_SCAN & ~MCMDR_READ; \
REG16(ETH_MAC_MCMDR) |= MCMDR_READ | ((scan) & MCMDR_SCAN); \
} while(0)
#define __mac_send_mii_write_cmd(pa, ra, wdata) \
do { \
__mac_set_mii_address(pa, ra); \
REG16(ETH_MAC_MCMDR) &= ~MCMDR_SCAN & ~MCMDR_READ; \
__mac_mii_write_data(wdata); \
} while(0)
#define __mac_mii_write_data(_2byte) (REG16(ETH_MAC_MWTDR) = _2byte)
#define __mac_mii_read_data() REG16(ETH_MAC_MRDDR)
#define __mac_mii_is_busy() (REG16(ETH_MAC_MINDR) & MINDR_BUSY)
// Operations of ETH FIFO registers
#define __fifo_enable_all_modules() \
do { \
REG32(ETH_FIFO_CR0) |= ALL_EN_REQ; \
} while(0)
#define __fifo_enable_all_modules_finish() \
do { \
REG32(ETH_FIFO_CR0) &= ~ALL_EN_REQ; \
} while(0)
// All enabled mean all reply bits were set except SRF_EN_RPLY...
#define __fifo_all_enabled() ((REG32(ETH_FIFO_CR0) & (ALL_EN_RPLY & ~SRF_EN_RPLY)) == (ALL_EN_RPLY & ~SRF_EN_RPLY))
#define __fifo_reset_all() \
do { \
REG32(ETH_FIFO_CR0) |= ALL_RST; \
REG32(ETH_FIFO_CR0) &= ~ALL_RST; \
} while(0)
#define __fifo_set_fr_threshold(_th) \
do { \
REG32(ETH_FIFO_CR1) &= ~CFG_FR_TH_MASK; \
REG32(ETH_FIFO_CR1) |= ((_th) << 16) & CFG_FR_TH_MASK; \
} while(0)
#define __fifo_set_XOFF_RTX(_th) \
do { \
REG32(ETH_FIFO_CR1) &= ~CFG_XOFF_RTX_MASK; \
REG32(ETH_FIFO_CR1) |= (_th) & CFG_XOFF_RTX_MASK; \
} while(0)
#define __fifo_set_high_wm(_th) \
do { \
REG32(ETH_FIFO_CR2) &= ~CFG_H_WM_MASK; \
REG32(ETH_FIFO_CR2) |= ((_th) << 16) & CFG_H_WM_MASK; \
} while(0)
#define __fifo_set_low_wm(_th) \
do { \
REG32(ETH_FIFO_CR2) &= ~CFG_L_WM_MASK; \
REG32(ETH_FIFO_CR2) |= (_th) & CFG_L_WM_MASK; \
} while(0)
#define __fifo_set_ft_high_wm(_th) \
do { \
REG32(ETH_FIFO_CR3) &= ~CFG_H_WM_FT_MASK; \
REG32(ETH_FIFO_CR3) |= ((_th) << 16) & CFG_H_WM_FT_MASK; \
} while(0)
#define __fifo_set_ft_threshold(_th) \
do { \
REG32(ETH_FIFO_CR3) &= ~CFG_FT_TH_MASK; \
REG32(ETH_FIFO_CR3) |= (_th) & CFG_FT_TH_MASK; \
} while(0)
#define __fifo_set_drop_cond(_cdt) \
do { \
REG32(ETH_FIFO_CR4) |= ((_cdt) >> 16) & HST_FLT_RFRM_MASK; \
} while(0)
#define __fifo_set_dropdc_cond(_cdt) \
do { \
REG32(ETH_FIFO_CR5) &= ~(((_cdt)>>16) & HST_FLT_RFRMDC_MASK); \
} while(0)
#define __fifo_set_pause_control() \
do { \
REG32(ETH_FIFO_CR5) &= ~CFG_H_DPLX; \
} while(0)
#define __fifo_set_clk_enable_mode() \
do { \
REG32(ETH_FIFO_CR5) |= CLK_EN_MODE; \
} while(0)
#define __fifo_set_half_duplex() \
do { \
REG32(ETH_FIFO_CR5) |= CFG_H_DPLX; \
} while(0)
#define __fifo_drop_lt64_frame() \
do { \
REG32(ETH_FIFO_CR5) |= HST_DR_LT_64; \
} while(0)
// Operations of ETH STAT registers
#define __stat_enable() \
do { \
REG32(ETH_STAT_CR) |= STAT_EN; \
} while(0)
#define __stat_disable() \
do { \
REG32(ETH_STAT_CR) &= ~STAT_EN; \
} while(0)
#define __stat_clear_counters() \
do { \
REG32(ETH_STAT_CR) &= ~STAT_CL; \
REG32(ETH_STAT_CR) |= STAT_CL; \
} while(0)
#define __stat_enable_auto_zero() \
do { \
REG32(ETH_STAT_CR) |= STAT_AZ; \
} while(0)
#define __stat_disable_auto_zero() \
do { \
REG32(ETH_STAT_CR) &= ~STAT_AZ; \
} while(0)
#define __stat_enable_carry_irq() \
do { \
__stat_unmask1(CARM1_RPK | CARM1_RBY | CARM1_RFC | CARM1_RDR | CARM1_RMC);\
__stat_unmask2(CARM2_TPK | CARM2_TBY | CARM2_TFC | CARM2_TDP | CARM2_TNC);\
} while(0)
#define __stat_disable_carry_irq() \
do { \
__stat_unmask1(0); \
__stat_unmask2(0); \
} while(0)
#define __stat_unmask1(_counter) \
do { \
REG32(ETH_STAT_CARM1) = ~(_counter); \
} while(0)
#define __stat_unmask2(_counter) \
do { \
REG32(ETH_STAT_CARM2) = ~(_counter); \
} while(0)
// Operations of ETH SAL registers
// Anyhow, enable broadcast ...
#define __sal_set_mode(_mode) \
do { \
REG32(ETH_SAL_AFR) = (_mode) | AFR_ABC; \
} while(0)
#define __sal_set_hash_table(_hi32, _lo32) \
do { \
REG32(ETH_SAL_HT1) = _hi32; \
REG32(ETH_SAL_HT2) = _lo32; \
} while(0)
#define __sal_get_hash_table(_hi32, _lo32) \
do { \
_hi32 = REG32(ETH_SAL_HT1); \
_lo32 = REG32(ETH_SAL_HT2); \
} while(0)
// Operations of DMA descripter
#define __desc_get_empty_flag(pktsize) (pktsize & EMPTY_FLAG_MASK)
#define __desc_get_FTPP_flags(pktsize) ((pktsize & FTPP_FLAGS_MASK) >> 16)
#define __desc_get_FTCFRM_flag(pktsize) (pktsize & FTCFRM_MASK)
#define __desc_get_FTPP_PADMODE_flag(pktsize) ((pktsize & FTPP_PADMODE_MASK) >> 18)
#define __desc_get_FTPP_GENFCS_flag(pktsize) (pktsize & FTPP_GENFCS_MASK)
#define __desc_get_FTPP_enable_flag(pktsize) (pktsize & FTPP_EN_MASK)
#define __desc_get_pkt_size(pktsize) (pktsize & PKT_SIZE_MASK)
#endif
Copy Permalink