openwrt-xburst/target/linux/brcm47xx/patches-3.2/046-bcma-add-extra-sprom-check.patch

From 1cd3d0de72e42161fe0df355c5429459265aeef0 Mon Sep 17 00:00:00 2001
From: Hauke Mehrtens <hauke@hauke-m.de>
Date: Sat, 14 Jan 2012 16:11:17 +0100
Subject: [PATCH 30/32] bcma: add extra sprom check

This check is needed on the BCM43224 device as it says in the
capabilities it has an sprom but is extra check says it has not.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
---
 drivers/bcma/sprom.c                        |    8 ++++++++
 include/linux/bcma/bcma_driver_chipcommon.h |   16 ++++++++++++++++
 2 files changed, 24 insertions(+), 0 deletions(-)

--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -209,6 +209,7 @@ int bcma_sprom_get(struct bcma_bus *bus)
 {
 	u16 offset;
 	u16 *sprom;
+	u32 sromctrl;
 	int err = 0;
 
 	if (!bus->drv_cc.core)
@@ -217,6 +218,12 @@ int bcma_sprom_get(struct bcma_bus *bus)
 	if (!(bus->drv_cc.capabilities & BCMA_CC_CAP_SPROM))
 		return -ENOENT;
 
+	if (bus->drv_cc.core->id.rev >= 32) {
+		sromctrl = bcma_read32(bus->drv_cc.core, BCMA_CC_SROM_CONTROL);
+		if (!(sromctrl & BCMA_CC_SROM_CONTROL_PRESENT))
+			return -ENOENT;
+	}
+
 	sprom = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
 			GFP_KERNEL);
 	if (!sprom)
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -239,6 +239,22 @@
 #define BCMA_CC_FLASH_CFG		0x0128
 #define  BCMA_CC_FLASH_CFG_DS		0x0010	/* Data size, 0=8bit, 1=16bit */
 #define BCMA_CC_FLASH_WAITCNT		0x012C
+#define BCMA_CC_SROM_CONTROL		0x0190
+#define  BCMA_CC_SROM_CONTROL_START	0x80000000
+#define  BCMA_CC_SROM_CONTROL_BUSY	0x80000000
+#define  BCMA_CC_SROM_CONTROL_OPCODE	0x60000000
+#define  BCMA_CC_SROM_CONTROL_OP_READ	0x00000000
+#define  BCMA_CC_SROM_CONTROL_OP_WRITE	0x20000000
+#define  BCMA_CC_SROM_CONTROL_OP_WRDIS	0x40000000
+#define  BCMA_CC_SROM_CONTROL_OP_WREN	0x60000000
+#define  BCMA_CC_SROM_CONTROL_OTPSEL	0x00000010
+#define  BCMA_CC_SROM_CONTROL_LOCK	0x00000008
+#define  BCMA_CC_SROM_CONTROL_SIZE_MASK	0x00000006
+#define  BCMA_CC_SROM_CONTROL_SIZE_1K	0x00000000
+#define  BCMA_CC_SROM_CONTROL_SIZE_4K	0x00000002
+#define  BCMA_CC_SROM_CONTROL_SIZE_16K	0x00000004
+#define  BCMA_CC_SROM_CONTROL_SIZE_SHIFT	1
+#define  BCMA_CC_SROM_CONTROL_PRESENT	0x00000001
 /* 0x1E0 is defined as shared BCMA_CLKCTLST */
 #define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
 #define BCMA_CC_UART0_DATA		0x0300