qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-23 18:53:20 +02:00
Code
afc4535cfc
openwrt-xburst/target/linux/brcm47xx/image/Makefile

138 lines
6.1 KiB
Makefile
Raw Normal View History

[brcm47xx]: generate images for the D-Link DWL-3150 as well git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 12:42:58 +03:00
#
# Copyright (C) 2006-2012 OpenWrt.org
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define Build/Clean
$(MAKE) -C lzma-loader clean
endef
define Image/Prepare
cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma
rm -f $(KDIR)/loader.gz
$(MAKE) -C lzma-loader \
BUILD_DIR="$(KDIR)" \
TARGET="$(KDIR)" \
clean install
echo -ne "\\x00" >> $(KDIR)/loader.gz
rm -f $(KDIR)/fs_mark
brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28125 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-08-30 00:23:51 +03:00
echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
endef
bcm47xx: Remove kernel checks from image Makefile 2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the 2.6 check will break with 3.0, remove it alltogether. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-16 00:11:49 +03:00
define Image/Build/wgt634u
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
dd if=$(KDIR)/loader.elf of=$(BIN_DIR)/openwrt-wgt634u-$(2).bin bs=131072 conv=sync
cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx >> $(BIN_DIR)/openwrt-wgt634u-$(2).bin
bcm47xx: Remove kernel checks from image Makefile 2.4 isn't present anymore, so it will always be 2.6 (or newer). Since the 2.6 check will break with 3.0, remove it alltogether. Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@27185 3c298f89-4303-0410-b956-a3cf2f4a3e73
2011-06-16 00:11:49 +03:00
endef
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
[brcm47xx]: generate images for the D-Link DWL-3150 as well git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 12:42:58 +03:00
define Image/Build/dwl3150
cp $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-dwl3150-$(2).bin
echo "BCM-5352-2050-0000000-01" >> $(BIN_DIR)/openwrt-dwl3150-$(2).bin
endef
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
define Image/Build/CyberTAN
$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
endef
define Image/Build/CyberTAN2
renamed wrt54g3gv2-vf images 'factory' and 'sysupgrade' did not make much sense. A discussion with jow convinced me that .trx results in a helpdesk disaster. So I decided to use '.bin' for normal bin-headers and '.noheader.bin' for the trx-v2 image. I fixed the wiki accordingly. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01 13:48:13 +03:00
$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/openwrt-$(2)-$(5).noheader.bin -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
endef
define Image/Build/CyberTANHead
$(STAGING_DIR_HOST)/bin/addpattern -5 -p $(3) -v v$(4) -i /dev/null -o $(KDIR)/openwrt-$(2)-header.bin $(if $(6),-s $(6))
endef
define Image/Build/Motorola
$(STAGING_DIR_HOST)/bin/motorola-bin -$(3) $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(4).bin
endef
define Image/Build/USR
$(STAGING_DIR_HOST)/bin/trx2usr $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin
endef
brcm47xx: Add edimax PS1208mfg support Thank you clemvangelis for the patches. (closes #7672) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02 23:27:54 +02:00
define Image/Build/Edi
$(STAGING_DIR_HOST)/bin/trx2edips $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin
endef
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
define trxalign/jffs2-128k
-a 0x20000 -f $(KDIR)/root.$(1)
endef
define trxalign/jffs2-64k
-a 0x10000 -f $(KDIR)/root.$(1)
endef
define trxalign/squashfs
mostly revert commit r22396 CFE does not boot images generated with these checksums because of wrong checksum. After flashing then with tftp to my Asus wl500-GPv1 the following messages are show: Null Rescue Flag. Boot program checksum is invalid Hello!! Enter Rescue Mode: (Check error) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22418 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-31 00:19:49 +03:00
-a 1024 -f $(KDIR)/root.$(1) $(if $(2),-f $(2)) -a 0x10000 -A $(KDIR)/fs_mark
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
endef
define Image/Build/trxV2
$(call Image/Build/CyberTANHead,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
renamed wrt54g3gv2-vf images 'factory' and 'sysupgrade' did not make much sense. A discussion with jow convinced me that .trx results in a helpdesk disaster. So I decided to use '.bin' for normal bin-headers and '.noheader.bin' for the trx-v2 image. I fixed the wiki accordingly. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22013 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-07-01 13:48:13 +03:00
$(STAGING_DIR_HOST)/bin/trx -2 -o $(BIN_DIR)/openwrt-$(2)-$(5).noheader.bin \
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
-f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
$(call trxalign/$(1),$(1),$(KDIR)/openwrt-$(2)-header.bin)
$(call Image/Build/CyberTAN2,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
endef
define Image/Build/jffs2-128k
$(call Image/Build/CyberTAN,$(1),wrt54gs,W54S,4.80.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrtsl54gs,W54U,2.08.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/trxV2,$(1),wrt54g3gv2-vf,3G2V,3.00.24,$(patsubst jffs2-%,jffs2,$(1)),6)
$(call Image/Build/wgt634u,$(1),$(patsubst jffs2-%,jffs2,$(1)))
endef
define Image/Build/jffs2-64k
$(call Image/Build/CyberTAN,$(1),wrt54g3g,W54F,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt54g3g-em,W3GN,2.20.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt54g,W54G,4.71.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt54gs_v4,W54s,1.09.1,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt150n,N150,1.51.3,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt300n_v1,EWCB,1.03.6,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt300n_v11,EWC2,1.51.2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/CyberTAN,$(1),wrt350n_v1,EWCG,1.04.1,$(patsubst jffs2-%,jffs2,$(1)))
brcm47xx: generate image for Linksys WRT610N V1 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31696 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-05-13 03:16:57 +03:00
$(call Image/Build/CyberTAN,$(1),wrt610n_v1,610N,1.0.1,$(patsubst jffs2-%,jffs2,$(1)))
brcm47xx: Additional BCM4716 support Additional BCM4716 support. Still needs working ethernet driver. Signed-off-by: Nathan Hintz <nlhintz@hotmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34672 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-12-13 20:57:38 +02:00
# $(call Image/Build/CyberTAN,$(1),wrt610n_v2,610N,2.0.0,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/CyberTAN,$(1),e3000_v1,61XN,1.0.3,$(patsubst jffs2-%,jffs2,$(1)))
[brcm47xx] generate image for Linksys e3200 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33003 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-08-05 16:14:00 +03:00
# $(call Image/Build/CyberTAN,$(1),e3200_v1,3200,1.0.1,$(patsubst jffs2-%,jffs2,$(1)))
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
$(call Image/Build/Motorola,$(1),wa840g,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Motorola,$(1),we800g,3,$(patsubst jffs2-%,jffs2,$(1)))
brcm47xx: Add edimax PS1208mfg support Thank you clemvangelis for the patches. (closes #7672) git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24217 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-12-02 23:27:54 +02:00
$(call Image/Build/Edi,$(1),ps1208mfg,$(patsubst jffs2-%,jffs2,$(1)))
[brcm47xx]: generate images for the D-Link DWL-3150 as well git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33961 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-10-27 12:42:58 +03:00
$(call Image/Build/dwl3150,$(1),$(patsubst jffs2-%,jffs2,$(1)))
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
endef
define Image/Build/squashfs
$(call Image/Build/jffs2-64k,$(1))
$(call Image/Build/jffs2-128k,$(1))
endef
define Image/Build/Initramfs
$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs.trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma
endef
brcm47xx: Add new image generation and fix leds/reset button on WNR834B V2 Thank you realopty for the patch. tools/firmware-utils/src/mkchkimg.c is from http://www.myopenrouter.com/download/10611/mkchkimg/ This closes #7702. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22516 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-06 23:21:32 +03:00
define Image/Build/Chk
$(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(2)-$(5).chk -k $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -b $(3) -r $(4)
endef
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
define Image/Build
$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx \
-f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
$(call trxalign/$(1),$(1))
$(call Image/Build/$(1),$(1))
$(call Image/Build/Motorola,$(1),wr850g,1,$(1))
$(call Image/Build/USR,$(1),usr5461,$(1))
brcm47xx: do not generate image for wgr614_v8 as long as we did not get any positive reports with that device. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22522 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-08-07 01:50:58 +03:00
# $(call Image/Build/Chk,$(1),wgr614_v8,U12H072T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
brcm47xx: add code to generate images for some netgear devices This is commented out until we get report of working devices. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30639 3c298f89-4303-0410-b956-a3cf2f4a3e73
2012-02-19 01:21:47 +02:00
# $(call Image/Build/Chk,$(1),wgr614_v9,U12H094T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wndr3300,U12H093T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wndr3400_v1,U12H155T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wndr3400_vcna,U12H155T01_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wndr4000,U12H181T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
$(call Image/Build/Chk,$(1),wnr834b_v2,U12H081T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wnr2000v2,U12H114T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wnr3500L,U12H136T99_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wnr3500U,U12H136T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wnr3500v2,U12H127T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
# $(call Image/Build/Chk,$(1),wnr3500v2_VC,U12H127T70_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
add back the base-files/image code from brcm-2.4 to brcm47xx git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21945 3c298f89-4303-0410-b956-a3cf2f4a3e73
2010-06-26 23:41:49 +03:00
endef
$(eval $(call BuildImage))
Copy Permalink