openwrt-xburst/target/linux/generic/patches-3.6/025-bcma_backport.patch

--- a/arch/mips/bcm47xx/nvram.c
+++ b/arch/mips/bcm47xx/nvram.c
@@ -43,8 +43,8 @@ static void early_nvram_init(void)
 #ifdef CONFIG_BCM47XX_SSB
 	case BCM47XX_BUS_TYPE_SSB:
 		mcore_ssb = &bcm47xx_bus.ssb.mipscore;
-		base = mcore_ssb->flash_window;
-		lim = mcore_ssb->flash_window_size;
+		base = mcore_ssb->pflash.window;
+		lim = mcore_ssb->pflash.window_size;
 		break;
 #endif
 #ifdef CONFIG_BCM47XX_BCMA
--- a/arch/mips/bcm47xx/wgt634u.c
+++ b/arch/mips/bcm47xx/wgt634u.c
@@ -156,10 +156,10 @@ static int __init wgt634u_init(void)
 					    SSB_CHIPCO_IRQ_GPIO);
 		}
 
-		wgt634u_flash_data.width = mcore->flash_buswidth;
-		wgt634u_flash_resource.start = mcore->flash_window;
-		wgt634u_flash_resource.end = mcore->flash_window
-					   + mcore->flash_window_size
+		wgt634u_flash_data.width = mcore->pflash.buswidth;
+		wgt634u_flash_resource.start = mcore->pflash.window;
+		wgt634u_flash_resource.end = mcore->pflash.window
+					   + mcore->pflash.window_size
 					   - 1;
 		return platform_add_devices(wgt634u_devices,
 					    ARRAY_SIZE(wgt634u_devices));
--- a/drivers/bcma/Kconfig
+++ b/drivers/bcma/Kconfig
@@ -48,12 +48,12 @@ config BCMA_DRIVER_MIPS
 
 config BCMA_SFLASH
 	bool
-	depends on BCMA_DRIVER_MIPS && BROKEN
+	depends on BCMA_DRIVER_MIPS
 	default y
 
 config BCMA_NFLASH
 	bool
-	depends on BCMA_DRIVER_MIPS && BROKEN
+	depends on BCMA_DRIVER_MIPS
 	default y
 
 config BCMA_DRIVER_GMAC_CMN
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
@@ -48,12 +48,13 @@ void bcma_chipco_serial_init(struct bcma
 #endif /* CONFIG_BCMA_DRIVER_MIPS */
 
 /* driver_chipcommon_pmu.c */
-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc);
-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc);
+u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
+u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
 
 #ifdef CONFIG_BCMA_SFLASH
 /* driver_chipcommon_sflash.c */
 int bcma_sflash_init(struct bcma_drv_cc *cc);
+extern struct platform_device bcma_sflash_dev;
 #else
 static inline int bcma_sflash_init(struct bcma_drv_cc *cc)
 {
@@ -65,6 +66,7 @@ static inline int bcma_sflash_init(struc
 #ifdef CONFIG_BCMA_NFLASH
 /* driver_chipcommon_nflash.c */
 int bcma_nflash_init(struct bcma_drv_cc *cc);
+extern struct platform_device bcma_nflash_dev;
 #else
 static inline int bcma_nflash_init(struct bcma_drv_cc *cc)
 {
@@ -82,6 +84,8 @@ extern void __exit bcma_host_pci_exit(vo
 /* driver_pci.c */
 u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address);
 
+extern int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc);
+
 #ifdef CONFIG_BCMA_DRIVER_PCI_HOSTMODE
 bool __devinit bcma_core_pci_is_in_hostmode(struct bcma_drv_pci *pc);
 void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc);
--- a/drivers/bcma/core.c
+++ b/drivers/bcma/core.c
@@ -65,7 +65,7 @@ void bcma_core_set_clockmode(struct bcma
 	switch (clkmode) {
 	case BCMA_CLKMODE_FAST:
 		bcma_set32(core, BCMA_CLKCTLST, BCMA_CLKCTLST_FORCEHT);
-		udelay(64);
+		usleep_range(64, 300);
 		for (i = 0; i < 1500; i++) {
 			if (bcma_read32(core, BCMA_CLKCTLST) &
 			    BCMA_CLKCTLST_HAVEHT) {
--- a/drivers/bcma/driver_chipcommon.c
+++ b/drivers/bcma/driver_chipcommon.c
@@ -4,12 +4,15 @@
  *
  * Copyright 2005, Broadcom Corporation
  * Copyright 2006, 2007, Michael Buesch <m@bues.ch>
+ * Copyright 2012, Hauke Mehrtens <hauke@hauke-m.de>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
 #include "bcma_private.h"
+#include <linux/bcm47xx_wdt.h>
 #include <linux/export.h>
+#include <linux/platform_device.h>
 #include <linux/bcma/bcma.h>
 
 static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset,
@@ -22,12 +25,93 @@ static inline u32 bcma_cc_write32_masked
 	return value;
 }
 
-void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+static u32 bcma_chipco_get_alp_clock(struct bcma_drv_cc *cc)
 {
-	u32 leddc_on = 10;
-	u32 leddc_off = 90;
+	if (cc->capabilities & BCMA_CC_CAP_PMU)
+		return bcma_pmu_get_alp_clock(cc);
 
-	if (cc->setup_done)
+	return 20000000;
+}
+
+static u32 bcma_chipco_watchdog_get_max_timer(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+	u32 nb;
+
+	if (cc->capabilities & BCMA_CC_CAP_PMU) {
+		if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
+			nb = 32;
+		else if (cc->core->id.rev < 26)
+			nb = 16;
+		else
+			nb = (cc->core->id.rev >= 37) ? 32 : 24;
+	} else {
+		nb = 28;
+	}
+	if (nb == 32)
+		return 0xffffffff;
+	else
+		return (1 << nb) - 1;
+}
+
+static u32 bcma_chipco_watchdog_timer_set_wdt(struct bcm47xx_wdt *wdt,
+					      u32 ticks)
+{
+	struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
+
+	return bcma_chipco_watchdog_timer_set(cc, ticks);
+}
+
+static u32 bcma_chipco_watchdog_timer_set_ms_wdt(struct bcm47xx_wdt *wdt,
+						 u32 ms)
+{
+	struct bcma_drv_cc *cc = bcm47xx_wdt_get_drvdata(wdt);
+	u32 ticks;
+
+	ticks = bcma_chipco_watchdog_timer_set(cc, cc->ticks_per_ms * ms);
+	return ticks / cc->ticks_per_ms;
+}
+
+static int bcma_chipco_watchdog_ticks_per_ms(struct bcma_drv_cc *cc)
+{
+	struct bcma_bus *bus = cc->core->bus;
+
+	if (cc->capabilities & BCMA_CC_CAP_PMU) {
+		if (bus->chipinfo.id == BCMA_CHIP_ID_BCM4706)
+			/* 4706 CC and PMU watchdogs are clocked at 1/4 of ALP clock */
+			return bcma_chipco_get_alp_clock(cc) / 4000;
+		else
+			/* based on 32KHz ILP clock */
+			return 32;
+	} else {
+		return bcma_chipco_get_alp_clock(cc) / 1000;
+	}
+}
+
+int bcma_chipco_watchdog_register(struct bcma_drv_cc *cc)
+{
+	struct bcm47xx_wdt wdt = {};
+	struct platform_device *pdev;
+
+	wdt.driver_data = cc;
+	wdt.timer_set = bcma_chipco_watchdog_timer_set_wdt;
+	wdt.timer_set_ms = bcma_chipco_watchdog_timer_set_ms_wdt;
+	wdt.max_timer_ms = bcma_chipco_watchdog_get_max_timer(cc) / cc->ticks_per_ms;
+
+	pdev = platform_device_register_data(NULL, "bcm47xx-wdt",
+					     cc->core->bus->num, &wdt,
+					     sizeof(wdt));
+	if (IS_ERR(pdev))
+		return PTR_ERR(pdev);
+
+	cc->watchdog = pdev;
+
+	return 0;
+}
+
+void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc)
+{
+	if (cc->early_setup_done)
 		return;
 
 	if (cc->core->id.rev >= 11)
@@ -36,6 +120,22 @@ void bcma_core_chipcommon_init(struct bc
 	if (cc->core->id.rev >= 35)
 		cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT);
 
+	if (cc->capabilities & BCMA_CC_CAP_PMU)
+		bcma_pmu_early_init(cc);
+
+	cc->early_setup_done = true;
+}
+
+void bcma_core_chipcommon_init(struct bcma_drv_cc *cc)
+{
+	u32 leddc_on = 10;
+	u32 leddc_off = 90;
+
+	if (cc->setup_done)
+		return;
+
+	bcma_core_chipcommon_early_init(cc);
+
 	if (cc->core->id.rev >= 20) {
 		bcma_cc_write32(cc, BCMA_CC_GPIOPULLUP, 0);
 		bcma_cc_write32(cc, BCMA_CC_GPIOPULLDOWN, 0);
@@ -56,15 +156,33 @@ void bcma_core_chipcommon_init(struct bc
 			((leddc_on << BCMA_CC_GPIOTIMER_ONTIME_SHIFT) |
 			 (leddc_off << BCMA_CC_GPIOTIMER_OFFTIME_SHIFT)));
 	}
+	cc->ticks_per_ms = bcma_chipco_watchdog_ticks_per_ms(cc);
 
 	cc->setup_done = true;
 }
 
 /* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */
-void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
+u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks)
 {
-	/* instant NMI */
-	bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
+	u32 maxt;
+	enum bcma_clkmode clkmode;
+
+	maxt = bcma_chipco_watchdog_get_max_timer(cc);
+	if (cc->capabilities & BCMA_CC_CAP_PMU) {
+		if (ticks == 1)
+			ticks = 2;
+		else if (ticks > maxt)
+			ticks = maxt;
+		bcma_cc_write32(cc, BCMA_CC_PMU_WATCHDOG, ticks);
+	} else {
+		clkmode = ticks ? BCMA_CLKMODE_FAST : BCMA_CLKMODE_DYNAMIC;
+		bcma_core_set_clockmode(cc->core, clkmode);
+		if (ticks > maxt)
+			ticks = maxt;
+		/* instant NMI */
+		bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks);
+	}
+	return ticks;
 }
 
 void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value)
@@ -118,8 +236,7 @@ void bcma_chipco_serial_init(struct bcma
 	struct bcma_serial_port *ports = cc->serial_ports;
 
 	if (ccrev >= 11 && ccrev != 15) {
-		/* Fixed ALP clock */
-		baud_base = bcma_pmu_alp_clock(cc);
+		baud_base = bcma_chipco_get_alp_clock(cc);
 		if (ccrev >= 21) {
 			/* Turn off UART clock before switching clocksource. */
 			bcma_cc_write32(cc, BCMA_CC_CORECTL,
--- a/drivers/bcma/driver_chipcommon_nflash.c
+++ b/drivers/bcma/driver_chipcommon_nflash.c
@@ -5,15 +5,40 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <linux/platform_device.h>
 #include <linux/bcma/bcma.h>
-#include <linux/bcma/bcma_driver_chipcommon.h>
-#include <linux/delay.h>
 
 #include "bcma_private.h"
 
+struct platform_device bcma_nflash_dev = {
+	.name		= "bcma_nflash",
+	.num_resources	= 0,
+};
+
 /* Initialize NAND flash access */
 int bcma_nflash_init(struct bcma_drv_cc *cc)
 {
-	bcma_err(cc->core->bus, "NAND flash support is broken\n");
+	struct bcma_bus *bus = cc->core->bus;
+
+	if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 &&
+	    cc->core->id.rev != 0x38) {
+		bcma_err(bus, "NAND flash on unsupported board!\n");
+		return -ENOTSUPP;
+	}
+
+	if (!(cc->capabilities & BCMA_CC_CAP_NFLASH)) {
+		bcma_err(bus, "NAND flash not present according to ChipCommon\n");
+		return -ENODEV;
+	}
+
+	cc->nflash.present = true;
+	if (cc->core->id.rev == 38 &&
+	    (cc->status & BCMA_CC_CHIPST_5357_NAND_BOOT))
+		cc->nflash.boot = true;
+
+	/* Prepare platform device, but don't register it yet. It's too early,
+	 * malloc (required by device_private_init) is not available yet. */
+	bcma_nflash_dev.dev.platform_data = &cc->nflash;
+
 	return 0;
 }
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -76,7 +76,10 @@ static void bcma_pmu_resources_init(stru
 	if (max_msk)
 		bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);
 
-	/* Add some delay; allow resources to come up and settle. */
+	/*
+	 * Add some delay; allow resources to come up and settle.
+	 * Delay is required for SoC (early init).
+	 */
 	mdelay(2);
 }
 
@@ -101,7 +104,7 @@ void bcma_chipco_bcm4331_ext_pa_lines_ct
 	bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
 }
 
-void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
+static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 
@@ -141,7 +144,7 @@ void bcma_pmu_workarounds(struct bcma_dr
 	}
 }
 
-void bcma_pmu_init(struct bcma_drv_cc *cc)
+void bcma_pmu_early_init(struct bcma_drv_cc *cc)
 {
 	u32 pmucap;
 
@@ -150,7 +153,10 @@ void bcma_pmu_init(struct bcma_drv_cc *c
 
 	bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
 		   cc->pmu.rev, pmucap);
+}
 
+void bcma_pmu_init(struct bcma_drv_cc *cc)
+{
 	if (cc->pmu.rev == 1)
 		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
 			      ~BCMA_CC_PMU_CTL_NOILPONW);
@@ -162,7 +168,7 @@ void bcma_pmu_init(struct bcma_drv_cc *c
 	bcma_pmu_workarounds(cc);
 }
 
-u32 bcma_pmu_alp_clock(struct bcma_drv_cc *cc)
+u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 
@@ -190,7 +196,7 @@ u32 bcma_pmu_alp_clock(struct bcma_drv_c
 /* Find the output of the "m" pll divider given pll controls that start with
  * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
  */
-static u32 bcma_pmu_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+static u32 bcma_pmu_pll_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
 {
 	u32 tmp, div, ndiv, p1, p2, fc;
 	struct bcma_bus *bus = cc->core->bus;
@@ -219,14 +225,14 @@ static u32 bcma_pmu_clock(struct bcma_dr
 	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;
 
 	/* Do calculation in Mhz */
-	fc = bcma_pmu_alp_clock(cc) / 1000000;
+	fc = bcma_pmu_get_alp_clock(cc) / 1000000;
 	fc = (p1 * ndiv * fc) / p2;
 
 	/* Return clock in Hertz */
 	return (fc / div) * 1000000;
 }
 
-static u32 bcma_pmu_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
+static u32 bcma_pmu_pll_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
 {
 	u32 tmp, ndiv, p1div, p2div;
 	u32 clock;
@@ -257,7 +263,7 @@ static u32 bcma_pmu_clock_bcm4706(struct
 }
 
 /* query bus clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcontrol(struct bcma_drv_cc *cc)
+static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 
@@ -265,40 +271,42 @@ u32 bcma_pmu_get_clockcontrol(struct bcm
 	case BCMA_CHIP_ID_BCM4716:
 	case BCMA_CHIP_ID_BCM4748:
 	case BCMA_CHIP_ID_BCM47162:
-		return bcma_pmu_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
-				      BCMA_CC_PMU5_MAINPLL_SSB);
+		return bcma_pmu_pll_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
+					  BCMA_CC_PMU5_MAINPLL_SSB);
 	case BCMA_CHIP_ID_BCM5356:
-		return bcma_pmu_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
-				      BCMA_CC_PMU5_MAINPLL_SSB);
+		return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
+					  BCMA_CC_PMU5_MAINPLL_SSB);
 	case BCMA_CHIP_ID_BCM5357:
 	case BCMA_CHIP_ID_BCM4749:
-		return bcma_pmu_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
-				      BCMA_CC_PMU5_MAINPLL_SSB);
+		return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
+					  BCMA_CC_PMU5_MAINPLL_SSB);
 	case BCMA_CHIP_ID_BCM4706:
-		return bcma_pmu_clock_bcm4706(cc, BCMA_CC_PMU4706_MAINPLL_PLL0,
-					      BCMA_CC_PMU5_MAINPLL_SSB);
+		return bcma_pmu_pll_clock_bcm4706(cc,
+						  BCMA_CC_PMU4706_MAINPLL_PLL0,
+						  BCMA_CC_PMU5_MAINPLL_SSB);
 	case BCMA_CHIP_ID_BCM53572:
 		return 75000000;
 	default:
-		bcma_warn(bus, "No backplane clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
+		bcma_warn(bus, "No bus clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
 	}
 	return BCMA_CC_PMU_HT_CLOCK;
 }
 
 /* query cpu clock frequency for PMU-enabled chipcommon */
-u32 bcma_pmu_get_clockcpu(struct bcma_drv_cc *cc)
+u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 
 	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572)
 		return 300000000;
 
+	/* New PMUs can have different clock for bus and CPU */
 	if (cc->pmu.rev >= 5) {
 		u32 pll;
 		switch (bus->chipinfo.id) {
 		case BCMA_CHIP_ID_BCM4706:
-			return bcma_pmu_clock_bcm4706(cc,
+			return bcma_pmu_pll_clock_bcm4706(cc,
 						BCMA_CC_PMU4706_MAINPLL_PLL0,
 						BCMA_CC_PMU5_MAINPLL_CPU);
 		case BCMA_CHIP_ID_BCM5356:
@@ -313,10 +321,11 @@ u32 bcma_pmu_get_clockcpu(struct bcma_dr
 			break;
 		}
 
-		return bcma_pmu_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
+		return bcma_pmu_pll_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
 	}
 
-	return bcma_pmu_get_clockcontrol(cc);
+	/* On old PMUs CPU has the same clock as the bus */
+	return bcma_pmu_get_bus_clock(cc);
 }
 
 static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
--- a/drivers/bcma/driver_chipcommon_sflash.c
+++ b/drivers/bcma/driver_chipcommon_sflash.c
@@ -5,15 +5,161 @@
  * Licensed under the GNU/GPL. See COPYING for details.
  */
 
+#include <linux/platform_device.h>
 #include <linux/bcma/bcma.h>
-#include <linux/bcma/bcma_driver_chipcommon.h>
-#include <linux/delay.h>
 
 #include "bcma_private.h"
 
+static struct resource bcma_sflash_resource = {
+	.name	= "bcma_sflash",
+	.start	= BCMA_SOC_FLASH2,
+	.end	= 0,
+	.flags  = IORESOURCE_MEM | IORESOURCE_READONLY,
+};
+
+struct platform_device bcma_sflash_dev = {
+	.name		= "bcma_sflash",
+	.resource	= &bcma_sflash_resource,
+	.num_resources	= 1,
+};
+
+struct bcma_sflash_tbl_e {
+	char *name;
+	u32 id;
+	u32 blocksize;
+	u16 numblocks;
+};
+
+static struct bcma_sflash_tbl_e bcma_sflash_st_tbl[] = {
+	{ "M25P20", 0x11, 0x10000, 4, },
+	{ "M25P40", 0x12, 0x10000, 8, },
+
+	{ "M25P16", 0x14, 0x10000, 32, },
+	{ "M25P32", 0x14, 0x10000, 64, },
+	{ "M25P64", 0x16, 0x10000, 128, },
+	{ "M25FL128", 0x17, 0x10000, 256, },
+	{ 0 },
+};
+
+static struct bcma_sflash_tbl_e bcma_sflash_sst_tbl[] = {
+	{ "SST25WF512", 1, 0x1000, 16, },
+	{ "SST25VF512", 0x48, 0x1000, 16, },
+	{ "SST25WF010", 2, 0x1000, 32, },
+	{ "SST25VF010", 0x49, 0x1000, 32, },
+	{ "SST25WF020", 3, 0x1000, 64, },
+	{ "SST25VF020", 0x43, 0x1000, 64, },
+	{ "SST25WF040", 4, 0x1000, 128, },
+	{ "SST25VF040", 0x44, 0x1000, 128, },
+	{ "SST25VF040B", 0x8d, 0x1000, 128, },
+	{ "SST25WF080", 5, 0x1000, 256, },
+	{ "SST25VF080B", 0x8e, 0x1000, 256, },
+	{ "SST25VF016", 0x41, 0x1000, 512, },
+	{ "SST25VF032", 0x4a, 0x1000, 1024, },
+	{ "SST25VF064", 0x4b, 0x1000, 2048, },
+	{ 0 },
+};
+
+static struct bcma_sflash_tbl_e bcma_sflash_at_tbl[] = {
+	{ "AT45DB011", 0xc, 256, 512, },
+	{ "AT45DB021", 0x14, 256, 1024, },
+	{ "AT45DB041", 0x1c, 256, 2048, },
+	{ "AT45DB081", 0x24, 256, 4096, },
+	{ "AT45DB161", 0x2c, 512, 4096, },
+	{ "AT45DB321", 0x34, 512, 8192, },
+	{ "AT45DB642", 0x3c, 1024, 8192, },
+	{ 0 },
+};
+
+static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
+{
+	int i;
+	bcma_cc_write32(cc, BCMA_CC_FLASHCTL,
+			BCMA_CC_FLASHCTL_START | opcode);
+	for (i = 0; i < 1000; i++) {
+		if (!(bcma_cc_read32(cc, BCMA_CC_FLASHCTL) &
+		      BCMA_CC_FLASHCTL_BUSY))
+			return;
+		cpu_relax();
+	}
+	bcma_err(cc->core->bus, "SFLASH control command failed (timeout)!\n");
+}
+
 /* Initialize serial flash access */
 int bcma_sflash_init(struct bcma_drv_cc *cc)
 {
-	bcma_err(cc->core->bus, "Serial flash support is broken\n");
+	struct bcma_bus *bus = cc->core->bus;
+	struct bcma_sflash *sflash = &cc->sflash;
+	struct bcma_sflash_tbl_e *e;
+	u32 id, id2;
+
+	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
+	case BCMA_CC_FLASHT_STSER:
+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_DP);
+
+		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 0);
+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
+		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
+
+		bcma_cc_write32(cc, BCMA_CC_FLASHADDR, 1);
+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_ST_RES);
+		id2 = bcma_cc_read32(cc, BCMA_CC_FLASHDATA);
+
+		switch (id) {
+		case 0xbf:
+			for (e = bcma_sflash_sst_tbl; e->name; e++) {
+				if (e->id == id2)
+					break;
+			}
+			break;
+		case 0x13:
+			return -ENOTSUPP;
+		default:
+			for (e = bcma_sflash_st_tbl; e->name; e++) {
+				if (e->id == id)
+					break;
+			}
+			break;
+		}
+		if (!e->name) {
+			bcma_err(bus, "Unsupported ST serial flash (id: 0x%X, id2: 0x%X)\n", id, id2);
+			return -ENOTSUPP;
+		}
+
+		break;
+	case BCMA_CC_FLASHT_ATSER:
+		bcma_sflash_cmd(cc, BCMA_CC_FLASHCTL_AT_STATUS);
+		id = bcma_cc_read32(cc, BCMA_CC_FLASHDATA) & 0x3c;
+
+		for (e = bcma_sflash_at_tbl; e->name; e++) {
+			if (e->id == id)
+				break;
+		}
+		if (!e->name) {
+			bcma_err(bus, "Unsupported Atmel serial flash (id: 0x%X)\n", id);
+			return -ENOTSUPP;
+		}
+
+		break;
+	default:
+		bcma_err(bus, "Unsupported flash type\n");
+		return -ENOTSUPP;
+	}
+
+	sflash->window = BCMA_SOC_FLASH2;
+	sflash->blocksize = e->blocksize;
+	sflash->numblocks = e->numblocks;
+	sflash->size = sflash->blocksize * sflash->numblocks;
+	sflash->present = true;
+
+	bcma_info(bus, "Found %s serial flash (size: %dKiB, blocksize: 0x%X, blocks: %d)\n",
+		  e->name, sflash->size / 1024, sflash->blocksize,
+		  sflash->numblocks);
+
+	/* Prepare platform device, but don't register it yet. It's too early,
+	 * malloc (required by device_private_init) is not available yet. */
+	bcma_sflash_dev.resource[0].end = bcma_sflash_dev.resource[0].start +
+					  sflash->size;
+	bcma_sflash_dev.dev.platform_data = sflash;
+
 	return 0;
 }
--- a/drivers/bcma/driver_mips.c
+++ b/drivers/bcma/driver_mips.c
@@ -115,7 +115,7 @@ static void bcma_core_mips_set_irq(struc
 			    bcma_read32(mdev, BCMA_MIPS_MIPS74K_INTMASK(0)) &
 			    ~(1 << irqflag));
 	else
-		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(irq), 0);
+		bcma_write32(mdev, BCMA_MIPS_MIPS74K_INTMASK(oldirq), 0);
 
 	/* assign the new one */
 	if (irq == 0) {
@@ -171,7 +171,7 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
 	struct bcma_bus *bus = mcore->core->bus;
 
 	if (bus->drv_cc.capabilities & BCMA_CC_CAP_PMU)
-		return bcma_pmu_get_clockcpu(&bus->drv_cc);
+		return bcma_pmu_get_cpu_clock(&bus->drv_cc);
 
 	bcma_err(bus, "No PMU available, need this to get the cpu clock\n");
 	return 0;
@@ -181,47 +181,66 @@ EXPORT_SYMBOL(bcma_cpu_clock);
 static void bcma_core_mips_flash_detect(struct bcma_drv_mips *mcore)
 {
 	struct bcma_bus *bus = mcore->core->bus;
+	struct bcma_drv_cc *cc = &bus->drv_cc;
 
-	switch (bus->drv_cc.capabilities & BCMA_CC_CAP_FLASHT) {
+	switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
 	case BCMA_CC_FLASHT_STSER:
 	case BCMA_CC_FLASHT_ATSER:
 		bcma_debug(bus, "Found serial flash\n");
-		bcma_sflash_init(&bus->drv_cc);
+		bcma_sflash_init(cc);
 		break;
 	case BCMA_CC_FLASHT_PARA:
 		bcma_debug(bus, "Found parallel flash\n");
-		bus->drv_cc.pflash.window = 0x1c000000;
-		bus->drv_cc.pflash.window_size = 0x02000000;
+		cc->pflash.present = true;
+		cc->pflash.window = BCMA_SOC_FLASH2;
+		cc->pflash.window_size = BCMA_SOC_FLASH2_SZ;
 
-		if ((bcma_read32(bus->drv_cc.core, BCMA_CC_FLASH_CFG) &
+		if ((bcma_read32(cc->core, BCMA_CC_FLASH_CFG) &
 		     BCMA_CC_FLASH_CFG_DS) == 0)
-			bus->drv_cc.pflash.buswidth = 1;
+			cc->pflash.buswidth = 1;
 		else
-			bus->drv_cc.pflash.buswidth = 2;
+			cc->pflash.buswidth = 2;
 		break;
 	default:
 		bcma_err(bus, "Flash type not supported\n");
 	}
 
-	if (bus->drv_cc.core->id.rev == 38 ||
+	if (cc->core->id.rev == 38 ||
 	    bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
-		if (bus->drv_cc.capabilities & BCMA_CC_CAP_NFLASH) {
+		if (cc->capabilities & BCMA_CC_CAP_NFLASH) {
 			bcma_debug(bus, "Found NAND flash\n");
-			bcma_nflash_init(&bus->drv_cc);
+			bcma_nflash_init(cc);
 		}
 	}
 }
 
+void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+{
+	struct bcma_bus *bus = mcore->core->bus;
+
+	if (mcore->early_setup_done)
+		return;
+
+	bcma_chipco_serial_init(&bus->drv_cc);
+	bcma_core_mips_flash_detect(mcore);
+
+	mcore->early_setup_done = true;
+}
+
 void bcma_core_mips_init(struct bcma_drv_mips *mcore)
 {
 	struct bcma_bus *bus;
 	struct bcma_device *core;
 	bus = mcore->core->bus;
 
+	if (mcore->setup_done)
+		return;
+
 	bcma_info(bus, "Initializing MIPS core...\n");
 
-	if (!mcore->setup_done)
-		mcore->assigned_irqs = 1;
+	bcma_core_mips_early_init(mcore);
+
+	mcore->assigned_irqs = 1;
 
 	/* Assign IRQs to all cores on the bus */
 	list_for_each_entry(core, &bus->cores, list) {
@@ -256,10 +275,5 @@ void bcma_core_mips_init(struct bcma_drv
 	bcma_info(bus, "IRQ reconfiguration done\n");
 	bcma_core_mips_dump_irq(bus);
 
-	if (mcore->setup_done)
-		return;
-
-	bcma_chipco_serial_init(&bus->drv_cc);
-	bcma_core_mips_flash_detect(mcore);
 	mcore->setup_done = true;
 }
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -51,7 +51,7 @@ static void bcma_pcie_mdio_set_phy(struc
 		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
 		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
 			break;
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
 }
 
@@ -92,7 +92,7 @@ static u16 bcma_pcie_mdio_read(struct bc
 			ret = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_DATA);
 			break;
 		}
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
 	return ret;
@@ -132,7 +132,7 @@ static void bcma_pcie_mdio_write(struct
 		v = pcicore_read32(pc, BCMA_CORE_PCI_MDIO_CONTROL);
 		if (v & BCMA_CORE_PCI_MDIOCTL_ACCESS_DONE)
 			break;
-		msleep(1);
+		usleep_range(1000, 2000);
 	}
 	pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
 }
--- a/drivers/bcma/driver_pci_host.c
+++ b/drivers/bcma/driver_pci_host.c
@@ -35,11 +35,6 @@ bool __devinit bcma_core_pci_is_in_hostm
 	    chipid_top != 0x5300)
 		return false;
 
-	if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
-		bcma_info(bus, "This PCI core is disabled and not working\n");
-		return false;
-	}
-
 	bcma_core_enable(pc->core, 0);
 
 	return !mips_busprobe32(tmp, pc->core->io_addr);
@@ -396,6 +391,11 @@ void __devinit bcma_core_pci_hostmode_in
 
 	bcma_info(bus, "PCIEcore in host mode found\n");
 
+	if (bus->sprom.boardflags_lo & BCMA_CORE_PCI_BFL_NOPCI) {
+		bcma_info(bus, "This PCIE core is disabled and not working\n");
+		return;
+	}
+
 	pc_host = kzalloc(sizeof(*pc_host), GFP_KERNEL);
 	if (!pc_host)  {
 		bcma_err(bus, "can not allocate memory");
@@ -425,9 +425,9 @@ void __devinit bcma_core_pci_hostmode_in
 	pc_host->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED;
 
 	/* Reset RC */
-	udelay(3000);
+	usleep_range(3000, 5000);
 	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST_OE);
-	udelay(1000);
+	usleep_range(1000, 2000);
 	pcicore_write32(pc, BCMA_CORE_PCI_CTL, BCMA_CORE_PCI_CTL_RST |
 			BCMA_CORE_PCI_CTL_RST_OE);
 
@@ -452,6 +452,8 @@ void __devinit bcma_core_pci_hostmode_in
 			pc_host->mem_resource.start = BCMA_SOC_PCI_MEM;
 			pc_host->mem_resource.end = BCMA_SOC_PCI_MEM +
 						    BCMA_SOC_PCI_MEM_SZ - 1;
+			pc_host->io_resource.start = 0x100;
+			pc_host->io_resource.end = 0x47F;
 			pci_membase_1G = BCMA_SOC_PCIE_DMA_H32;
 			pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
 					tmp | BCMA_SOC_PCI_MEM);
@@ -459,6 +461,8 @@ void __devinit bcma_core_pci_hostmode_in
 			pc_host->mem_resource.start = BCMA_SOC_PCI1_MEM;
 			pc_host->mem_resource.end = BCMA_SOC_PCI1_MEM +
 						    BCMA_SOC_PCI_MEM_SZ - 1;
+			pc_host->io_resource.start = 0x480;
+			pc_host->io_resource.end = 0x7FF;
 			pci_membase_1G = BCMA_SOC_PCIE1_DMA_H32;
 			pc_host->host_cfg_addr = BCMA_SOC_PCI1_CFG;
 			pcicore_write32(pc, BCMA_CORE_PCI_SBTOPCI0,
@@ -481,7 +485,7 @@ void __devinit bcma_core_pci_hostmode_in
 	 * before issuing configuration requests to PCI Express
 	 * devices.
 	 */
-	udelay(100000);
+	msleep(100);
 
 	bcma_core_pci_enable_crs(pc);
 
@@ -501,7 +505,7 @@ void __devinit bcma_core_pci_hostmode_in
 	set_io_port_base(pc_host->pci_controller.io_map_base);
 	/* Give some time to the PCI controller to configure itself with the new
 	 * values. Not waiting at this point causes crashes of the machine. */
-	mdelay(10);
+	usleep_range(10000, 15000);
 	register_pci_controller(&pc_host->pci_controller);
 	return;
 }
@@ -534,7 +538,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_
 static void bcma_core_pci_fixup_addresses(struct pci_dev *dev)
 {
 	struct resource *res;
-	int pos;
+	int pos, err;
 
 	if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
 		/* This is not a device on the PCI-core bridge. */
@@ -547,8 +551,12 @@ static void bcma_core_pci_fixup_addresse
 
 	for (pos = 0; pos < 6; pos++) {
 		res = &dev->resource[pos];
-		if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM))
-			pci_assign_resource(dev, pos);
+		if (res->flags & (IORESOURCE_IO | IORESOURCE_MEM)) {
+			err = pci_assign_resource(dev, pos);
+			if (err)
+				pr_err("PCI: Problem fixing up the addresses on %s\n",
+				       pci_name(dev));
+		}
 	}
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, bcma_core_pci_fixup_addresses);
--- a/drivers/bcma/host_pci.c
+++ b/drivers/bcma/host_pci.c
@@ -77,8 +77,8 @@ static void bcma_host_pci_write32(struct
 }
 
 #ifdef CONFIG_BCMA_BLOCKIO
-void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
-			      size_t count, u16 offset, u8 reg_width)
+static void bcma_host_pci_block_read(struct bcma_device *core, void *buffer,
+				     size_t count, u16 offset, u8 reg_width)
 {
 	void __iomem *addr = core->bus->mmio + offset;
 	if (core->bus->mapped_core != core)
@@ -100,8 +100,9 @@ void bcma_host_pci_block_read(struct bcm
 	}
 }
 
-void bcma_host_pci_block_write(struct bcma_device *core, const void *buffer,
-			       size_t count, u16 offset, u8 reg_width)
+static void bcma_host_pci_block_write(struct bcma_device *core,
+				      const void *buffer, size_t count,
+				      u16 offset, u8 reg_width)
 {
 	void __iomem *addr = core->bus->mmio + offset;
 	if (core->bus->mapped_core != core)
@@ -139,7 +140,7 @@ static void bcma_host_pci_awrite32(struc
 	iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset);
 }
 
-const struct bcma_host_ops bcma_host_pci_ops = {
+static const struct bcma_host_ops bcma_host_pci_ops = {
 	.read8		= bcma_host_pci_read8,
 	.read16		= bcma_host_pci_read16,
 	.read32		= bcma_host_pci_read32,
@@ -237,7 +238,7 @@ static void __devexit bcma_host_pci_remo
 	pci_set_drvdata(dev, NULL);
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int bcma_host_pci_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
@@ -260,11 +261,11 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
 			 bcma_host_pci_resume);
 #define BCMA_PM_OPS	(&bcma_pm_ops)
 
-#else /* CONFIG_PM */
+#else /* CONFIG_PM_SLEEP */
 
 #define BCMA_PM_OPS     NULL
 
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM_SLEEP */
 
 static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
@@ -272,6 +273,7 @@ static DEFINE_PCI_DEVICE_TABLE(bcma_pci_
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4358) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4359) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
 	{ 0, },
--- a/drivers/bcma/host_soc.c
+++ b/drivers/bcma/host_soc.c
@@ -143,7 +143,7 @@ static void bcma_host_soc_awrite32(struc
 	writel(value, core->io_wrap + offset);
 }
 
-const struct bcma_host_ops bcma_host_soc_ops = {
+static const struct bcma_host_ops bcma_host_soc_ops = {
 	.read8		= bcma_host_soc_read8,
 	.read16		= bcma_host_soc_read16,
 	.read32		= bcma_host_soc_read32,
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
@@ -7,6 +7,7 @@
 
 #include "bcma_private.h"
 #include <linux/module.h>
+#include <linux/platform_device.h>
 #include <linux/bcma/bcma.h>
 #include <linux/slab.h>
 
@@ -80,6 +81,18 @@ struct bcma_device *bcma_find_core(struc
 }
 EXPORT_SYMBOL_GPL(bcma_find_core);
 
+static struct bcma_device *bcma_find_core_unit(struct bcma_bus *bus, u16 coreid,
+					       u8 unit)
+{
+	struct bcma_device *core;
+
+	list_for_each_entry(core, &bus->cores, list) {
+		if (core->id.id == coreid && core->core_unit == unit)
+			return core;
+	}
+	return NULL;
+}
+
 static void bcma_release_core_dev(struct device *dev)
 {
 	struct bcma_device *core = container_of(dev, struct bcma_device, dev);
@@ -136,6 +149,28 @@ static int bcma_register_cores(struct bc
 		dev_id++;
 	}
 
+#ifdef CONFIG_BCMA_SFLASH
+	if (bus->drv_cc.sflash.present) {
+		err = platform_device_register(&bcma_sflash_dev);
+		if (err)
+			bcma_err(bus, "Error registering serial flash\n");
+	}
+#endif
+
+#ifdef CONFIG_BCMA_NFLASH
+	if (bus->drv_cc.nflash.present) {
+		err = platform_device_register(&bcma_nflash_dev);
+		if (err)
+			bcma_err(bus, "Error registering NAND flash\n");
+	}
+#endif
+
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
+		err = bcma_chipco_watchdog_register(&bus->drv_cc);
+		if (err)
+			bcma_err(bus, "Error registering watchdog driver\n");
+	}
+
 	return 0;
 }
 
@@ -148,6 +183,8 @@ static void bcma_unregister_cores(struct
 		if (core->dev_registered)
 			device_unregister(&core->dev);
 	}
+	if (bus->hosttype == BCMA_HOSTTYPE_SOC)
+		platform_device_unregister(bus->drv_cc.watchdog);
 }
 
 int __devinit bcma_bus_register(struct bcma_bus *bus)
@@ -166,6 +203,20 @@ int __devinit bcma_bus_register(struct b
 		return -1;
 	}
 
+	/* Early init CC core */
+	core = bcma_find_core(bus, bcma_cc_core_id(bus));
+	if (core) {
+		bus->drv_cc.core = core;
+		bcma_core_chipcommon_early_init(&bus->drv_cc);
+	}
+
+	/* Try to get SPROM */
+	err = bcma_sprom_get(bus);
+	if (err == -ENOENT) {
+		bcma_err(bus, "No SPROM available\n");
+	} else if (err)
+		bcma_err(bus, "Failed to get SPROM: %d\n", err);
+
 	/* Init CC core */
 	core = bcma_find_core(bus, bcma_cc_core_id(bus));
 	if (core) {
@@ -181,10 +232,17 @@ int __devinit bcma_bus_register(struct b
 	}
 
 	/* Init PCIE core */
-	core = bcma_find_core(bus, BCMA_CORE_PCIE);
+	core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 0);
+	if (core) {
+		bus->drv_pci[0].core = core;
+		bcma_core_pci_init(&bus->drv_pci[0]);
+	}
+
+	/* Init PCIE core */
+	core = bcma_find_core_unit(bus, BCMA_CORE_PCIE, 1);
 	if (core) {
-		bus->drv_pci.core = core;
-		bcma_core_pci_init(&bus->drv_pci);
+		bus->drv_pci[1].core = core;
+		bcma_core_pci_init(&bus->drv_pci[1]);
 	}
 
 	/* Init GBIT MAC COMMON core */
@@ -194,13 +252,6 @@ int __devinit bcma_bus_register(struct b
 		bcma_core_gmac_cmn_init(&bus->drv_gmac_cmn);
 	}
 
-	/* Try to get SPROM */
-	err = bcma_sprom_get(bus);
-	if (err == -ENOENT) {
-		bcma_err(bus, "No SPROM available\n");
-	} else if (err)
-		bcma_err(bus, "Failed to get SPROM: %d\n", err);
-
 	/* Register found cores */
 	bcma_register_cores(bus);
 
@@ -211,7 +262,17 @@ int __devinit bcma_bus_register(struct b
 
 void bcma_bus_unregister(struct bcma_bus *bus)
 {
+	struct bcma_device *cores[3];
+
+	cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
+	cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
+	cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
+
 	bcma_unregister_cores(bus);
+
+	kfree(cores[2]);
+	kfree(cores[1]);
+	kfree(cores[0]);
 }
 
 int __init bcma_bus_early_register(struct bcma_bus *bus,
@@ -248,18 +309,18 @@ int __init bcma_bus_early_register(struc
 		return -1;
 	}
 
-	/* Init CC core */
+	/* Early init CC core */
 	core = bcma_find_core(bus, bcma_cc_core_id(bus));
 	if (core) {
 		bus->drv_cc.core = core;
-		bcma_core_chipcommon_init(&bus->drv_cc);
+		bcma_core_chipcommon_early_init(&bus->drv_cc);
 	}
 
-	/* Init MIPS core */
+	/* Early init MIPS core */
 	core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
 	if (core) {
 		bus->drv_mips.core = core;
-		bcma_core_mips_init(&bus->drv_mips);
+		bcma_core_mips_early_init(&bus->drv_mips);
 	}
 
 	bcma_info(bus, "Early bus registered\n");
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -507,7 +507,9 @@ static bool bcma_sprom_onchip_available(
 		/* for these chips OTP is always available */
 		present = true;
 		break;
+	case BCMA_CHIP_ID_BCM43227:
 	case BCMA_CHIP_ID_BCM43228:
+	case BCMA_CHIP_ID_BCM43428:
 		present = chip_status & BCMA_CC_CHIPST_43228_OTP_PRESENT;
 		break;
 	default:
@@ -593,8 +595,11 @@ int bcma_sprom_get(struct bcma_bus *bus)
 		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
 
 	err = bcma_sprom_valid(sprom);
-	if (err)
+	if (err) {
+		bcma_warn(bus, "invalid sprom read from the PCIe card, try to use fallback sprom\n");
+		err = bcma_fill_sprom_with_fallback(bus, &bus->sprom);
 		goto out;
+	}
 
 	bcma_sprom_extract_r8(bus, sprom);
 
--- a/include/linux/bcma/bcma.h
+++ b/include/linux/bcma/bcma.h
@@ -10,7 +10,7 @@
 #include <linux/bcma/bcma_driver_gmac_cmn.h>
 #include <linux/ssb/ssb.h> /* SPROM sharing */
 
-#include "bcma_regs.h"
+#include <linux/bcma/bcma_regs.h>
 
 struct bcma_device;
 struct bcma_bus;
@@ -157,6 +157,7 @@ struct bcma_host_ops {
 
 /* Chip IDs of SoCs */
 #define BCMA_CHIP_ID_BCM4706	0x5300
+#define  BCMA_PKG_ID_BCM4706L	1
 #define BCMA_CHIP_ID_BCM4716	0x4716
 #define  BCMA_PKG_ID_BCM4716	8
 #define  BCMA_PKG_ID_BCM4717	9
@@ -166,7 +167,11 @@ struct bcma_host_ops {
 #define BCMA_CHIP_ID_BCM4749	0x4749
 #define BCMA_CHIP_ID_BCM5356	0x5356
 #define BCMA_CHIP_ID_BCM5357	0x5357
+#define  BCMA_PKG_ID_BCM5358	9
+#define  BCMA_PKG_ID_BCM47186	10
+#define  BCMA_PKG_ID_BCM5357	11
 #define BCMA_CHIP_ID_BCM53572	53572
+#define  BCMA_PKG_ID_BCM47188	9
 
 struct bcma_device {
 	struct bcma_bus *bus;
@@ -251,7 +256,7 @@ struct bcma_bus {
 	u8 num;
 
 	struct bcma_drv_cc drv_cc;
-	struct bcma_drv_pci drv_pci;
+	struct bcma_drv_pci drv_pci[2];
 	struct bcma_drv_mips drv_mips;
 	struct bcma_drv_gmac_cmn drv_gmac_cmn;
 
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -1,6 +1,8 @@
 #ifndef LINUX_BCMA_DRIVER_CC_H_
 #define LINUX_BCMA_DRIVER_CC_H_
 
+#include <linux/platform_device.h>
+
 /** ChipCommon core registers. **/
 #define BCMA_CC_ID			0x0000
 #define  BCMA_CC_ID_ID			0x0000FFFF
@@ -100,6 +102,7 @@
 #define  BCMA_CC_CHIPST_4706_SFLASH_TYPE	BIT(2) /* 0: 8b-p/ST-s flash, 1: 16b-p/Atmal-s flash */
 #define  BCMA_CC_CHIPST_4706_MIPS_BENDIAN	BIT(3) /* 0: little, 1: big endian */
 #define  BCMA_CC_CHIPST_4706_PCIE1_DISABLE	BIT(5) /* PCIE1 enable strap pin */
+#define  BCMA_CC_CHIPST_5357_NAND_BOOT		BIT(4) /* NAND boot, valid for CC rev 38 and/or BCM5357 */
 #define BCMA_CC_JCMD			0x0030		/* Rev >= 10 only */
 #define  BCMA_CC_JCMD_START		0x80000000
 #define  BCMA_CC_JCMD_BUSY		0x80000000
@@ -266,6 +269,29 @@
 #define  BCMA_CC_SROM_CONTROL_SIZE_16K	0x00000004
 #define  BCMA_CC_SROM_CONTROL_SIZE_SHIFT	1
 #define  BCMA_CC_SROM_CONTROL_PRESENT	0x00000001
+/* Block 0x140 - 0x190 registers are chipset specific */
+#define BCMA_CC_4706_FLASHSCFG		0x18C		/* Flash struct configuration */
+#define  BCMA_CC_4706_FLASHSCFG_MASK	0x000000ff
+#define  BCMA_CC_4706_FLASHSCFG_SF1	0x00000001	/* 2nd serial flash present */
+#define  BCMA_CC_4706_FLASHSCFG_PF1	0x00000002	/* 2nd parallel flash present */
+#define  BCMA_CC_4706_FLASHSCFG_SF1_TYPE	0x00000004	/* 2nd serial flash type : 0 : ST, 1 : Atmel */
+#define  BCMA_CC_4706_FLASHSCFG_NF1	0x00000008	/* 2nd NAND flash present */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_MASK	0x000000f0
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_4MB	0x00000010	/* 4MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_8MB	0x00000020	/* 8MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_16MB	0x00000030	/* 16MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_32MB	0x00000040	/* 32MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_64MB	0x00000050	/* 64MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_128MB	0x00000060	/* 128MB */
+#define  BCMA_CC_4706_FLASHSCFG_1ST_MADDR_SEG_256MB	0x00000070	/* 256MB */
+/* NAND flash registers for BCM4706 (corerev = 31) */
+#define BCMA_CC_NFLASH_CTL		0x01A0
+#define  BCMA_CC_NFLASH_CTL_ERR		0x08000000
+#define BCMA_CC_NFLASH_CONF		0x01A4
+#define BCMA_CC_NFLASH_COL_ADDR		0x01A8
+#define BCMA_CC_NFLASH_ROW_ADDR		0x01AC
+#define BCMA_CC_NFLASH_DATA		0x01B0
+#define BCMA_CC_NFLASH_WAITCNT0		0x01B4
 /* 0x1E0 is defined as shared BCMA_CLKCTLST */
 #define BCMA_CC_HW_WORKAROUND		0x01E4 /* Hardware workaround (rev >= 20) */
 #define BCMA_CC_UART0_DATA		0x0300
@@ -325,6 +351,60 @@
 #define BCMA_CC_PLLCTL_ADDR		0x0660
 #define BCMA_CC_PLLCTL_DATA		0x0664
 #define BCMA_CC_SPROM			0x0800 /* SPROM beginning */
+/* NAND flash MLC controller registers (corerev >= 38) */
+#define BCMA_CC_NAND_REVISION		0x0C00
+#define BCMA_CC_NAND_CMD_START		0x0C04
+#define BCMA_CC_NAND_CMD_ADDR_X		0x0C08
+#define BCMA_CC_NAND_CMD_ADDR		0x0C0C
+#define BCMA_CC_NAND_CMD_END_ADDR	0x0C10
+#define BCMA_CC_NAND_CS_NAND_SELECT	0x0C14
+#define BCMA_CC_NAND_CS_NAND_XOR	0x0C18
+#define BCMA_CC_NAND_SPARE_RD0		0x0C20
+#define BCMA_CC_NAND_SPARE_RD4		0x0C24
+#define BCMA_CC_NAND_SPARE_RD8		0x0C28
+#define BCMA_CC_NAND_SPARE_RD12		0x0C2C
+#define BCMA_CC_NAND_SPARE_WR0		0x0C30
+#define BCMA_CC_NAND_SPARE_WR4		0x0C34
+#define BCMA_CC_NAND_SPARE_WR8		0x0C38
+#define BCMA_CC_NAND_SPARE_WR12		0x0C3C
+#define BCMA_CC_NAND_ACC_CONTROL	0x0C40
+#define BCMA_CC_NAND_CONFIG		0x0C48
+#define BCMA_CC_NAND_TIMING_1		0x0C50
+#define BCMA_CC_NAND_TIMING_2		0x0C54
+#define BCMA_CC_NAND_SEMAPHORE		0x0C58
+#define BCMA_CC_NAND_DEVID		0x0C60
+#define BCMA_CC_NAND_DEVID_X		0x0C64
+#define BCMA_CC_NAND_BLOCK_LOCK_STATUS	0x0C68
+#define BCMA_CC_NAND_INTFC_STATUS	0x0C6C
+#define BCMA_CC_NAND_ECC_CORR_ADDR_X	0x0C70
+#define BCMA_CC_NAND_ECC_CORR_ADDR	0x0C74
+#define BCMA_CC_NAND_ECC_UNC_ADDR_X	0x0C78
+#define BCMA_CC_NAND_ECC_UNC_ADDR	0x0C7C
+#define BCMA_CC_NAND_READ_ERROR_COUNT	0x0C80
+#define BCMA_CC_NAND_CORR_STAT_THRESHOLD	0x0C84
+#define BCMA_CC_NAND_READ_ADDR_X	0x0C90
+#define BCMA_CC_NAND_READ_ADDR		0x0C94
+#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR_X	0x0C98
+#define BCMA_CC_NAND_PAGE_PROGRAM_ADDR	0x0C9C
+#define BCMA_CC_NAND_COPY_BACK_ADDR_X	0x0CA0
+#define BCMA_CC_NAND_COPY_BACK_ADDR	0x0CA4
+#define BCMA_CC_NAND_BLOCK_ERASE_ADDR_X	0x0CA8
+#define BCMA_CC_NAND_BLOCK_ERASE_ADDR	0x0CAC
+#define BCMA_CC_NAND_INV_READ_ADDR_X	0x0CB0
+#define BCMA_CC_NAND_INV_READ_ADDR	0x0CB4
+#define BCMA_CC_NAND_BLK_WR_PROTECT	0x0CC0
+#define BCMA_CC_NAND_ACC_CONTROL_CS1	0x0CD0
+#define BCMA_CC_NAND_CONFIG_CS1		0x0CD4
+#define BCMA_CC_NAND_TIMING_1_CS1	0x0CD8
+#define BCMA_CC_NAND_TIMING_2_CS1	0x0CDC
+#define BCMA_CC_NAND_SPARE_RD16		0x0D30
+#define BCMA_CC_NAND_SPARE_RD20		0x0D34
+#define BCMA_CC_NAND_SPARE_RD24		0x0D38
+#define BCMA_CC_NAND_SPARE_RD28		0x0D3C
+#define BCMA_CC_NAND_CACHE_ADDR		0x0D40
+#define BCMA_CC_NAND_CACHE_DATA		0x0D44
+#define BCMA_CC_NAND_CTRL_CONFIG	0x0D48
+#define BCMA_CC_NAND_CTRL_STATUS	0x0D4C
 
 /* Divider allocation in 4716/47162/5356 */
 #define BCMA_CC_PMU5_MAINPLL_CPU	1
@@ -415,6 +495,13 @@
 /* 4313 Chip specific ChipControl register bits */
 #define BCMA_CCTRL_4313_12MA_LED_DRIVE		0x00000007	/* 12 mA drive strengh for later 4313 */
 
+/* BCM5357 ChipControl register bits */
+#define BCMA_CHIPCTL_5357_EXTPA			BIT(14)
+#define BCMA_CHIPCTL_5357_ANT_MUX_2O3		BIT(15)
+#define BCMA_CHIPCTL_5357_NFLASH		BIT(16)
+#define BCMA_CHIPCTL_5357_I2S_PINS_ENABLE	BIT(18)
+#define BCMA_CHIPCTL_5357_I2CSPI_PINS_ENABLE	BIT(19)
+
 /* Data for the PMU, if available.
  * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU)
  */
@@ -425,11 +512,35 @@ struct bcma_chipcommon_pmu {
 
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 struct bcma_pflash {
+	bool present;
 	u8 buswidth;
 	u32 window;
 	u32 window_size;
 };
 
+#ifdef CONFIG_BCMA_SFLASH
+struct bcma_sflash {
+	bool present;
+	u32 window;
+	u32 blocksize;
+	u16 numblocks;
+	u32 size;
+
+	struct mtd_info *mtd;
+};
+#endif
+
+#ifdef CONFIG_BCMA_NFLASH
+struct mtd_info;
+
+struct bcma_nflash {
+	bool present;
+	bool boot;		/* This is the flash the SoC boots from */
+
+	struct mtd_info *mtd;
+};
+#endif
+
 struct bcma_serial_port {
 	void *regs;
 	unsigned long clockspeed;
@@ -445,15 +556,24 @@ struct bcma_drv_cc {
 	u32 capabilities;
 	u32 capabilities_ext;
 	u8 setup_done:1;
+	u8 early_setup_done:1;
 	/* Fast Powerup Delay constant */
 	u16 fast_pwrup_delay;
 	struct bcma_chipcommon_pmu pmu;
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 	struct bcma_pflash pflash;
+#ifdef CONFIG_BCMA_SFLASH
+	struct bcma_sflash sflash;
+#endif
+#ifdef CONFIG_BCMA_NFLASH
+	struct bcma_nflash nflash;
+#endif
 
 	int nr_serial_ports;
 	struct bcma_serial_port serial_ports[4];
 #endif /* CONFIG_BCMA_DRIVER_MIPS */
+	u32 ticks_per_ms;
+	struct platform_device *watchdog;
 };
 
 /* Register access */
@@ -470,14 +590,14 @@ struct bcma_drv_cc {
 	bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set))
 
 extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc);
+extern void bcma_core_chipcommon_early_init(struct bcma_drv_cc *cc);
 
 extern void bcma_chipco_suspend(struct bcma_drv_cc *cc);
 extern void bcma_chipco_resume(struct bcma_drv_cc *cc);
 
 void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable);
 
-extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc,
-					  u32 ticks);
+extern u32 bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks);
 
 void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value);
 
@@ -493,6 +613,7 @@ u32 bcma_chipco_gpio_polarity(struct bcm
 
 /* PMU support */
 extern void bcma_pmu_init(struct bcma_drv_cc *cc);
+extern void bcma_pmu_early_init(struct bcma_drv_cc *cc);
 
 extern void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset,
 				  u32 value);
--- a/include/linux/bcma/bcma_driver_mips.h
+++ b/include/linux/bcma/bcma_driver_mips.h
@@ -35,13 +35,16 @@ struct bcma_device;
 struct bcma_drv_mips {
 	struct bcma_device *core;
 	u8 setup_done:1;
+	u8 early_setup_done:1;
 	unsigned int assigned_irqs;
 };
 
 #ifdef CONFIG_BCMA_DRIVER_MIPS
 extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
 #else
 static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
 #endif
 
 extern u32 bcma_cpu_clock(struct bcma_drv_mips *mcore);
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -11,11 +11,13 @@
 #define  BCMA_CLKCTLST_HAVEHTREQ	0x00000010 /* HT available request */
 #define  BCMA_CLKCTLST_HWCROFF		0x00000020 /* Force HW clock request off */
 #define  BCMA_CLKCTLST_EXTRESREQ	0x00000700 /* Mask of external resource requests */
+#define  BCMA_CLKCTLST_EXTRESREQ_SHIFT	8
 #define  BCMA_CLKCTLST_HAVEALP		0x00010000 /* ALP available */
 #define  BCMA_CLKCTLST_HAVEHT		0x00020000 /* HT available */
 #define  BCMA_CLKCTLST_BP_ON_ALP	0x00040000 /* RO: running on ALP clock */
 #define  BCMA_CLKCTLST_BP_ON_HT		0x00080000 /* RO: running on HT clock */
 #define  BCMA_CLKCTLST_EXTRESST		0x07000000 /* Mask of external resource status */
+#define  BCMA_CLKCTLST_EXTRESST_SHIFT	24
 /* Is there any BCM4328 on BCMA bus? */
 #define  BCMA_CLKCTLST_4328A0_HAVEHT	0x00010000 /* 4328a0 has reversed bits */
 #define  BCMA_CLKCTLST_4328A0_HAVEALP	0x00020000 /* 4328a0 has reversed bits */
@@ -83,4 +85,9 @@
 							 * (2 ZettaBytes), high 32 bits
 							 */
 
+#define BCMA_SOC_FLASH1			0x1fc00000	/* MIPS Flash Region 1 */
+#define BCMA_SOC_FLASH1_SZ		0x00400000	/* MIPS Size of Flash Region 1 */
+#define BCMA_SOC_FLASH2			0x1c000000	/* Flash Region 2 (region 1 shadowed here) */
+#define BCMA_SOC_FLASH2_SZ		0x02000000	/* Size of Flash Region 2 */
+
 #endif /* LINUX_BCMA_REGS_H_ */
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4622,7 +4622,7 @@ static int b43_wireless_core_init(struct
 	switch (dev->dev->bus_type) {
 #ifdef CONFIG_B43_BCMA
 	case B43_BUS_BCMA:
-		bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci,
+		bcma_core_pci_irq_ctl(&dev->dev->bdev->bus->drv_pci[0],
 				      dev->dev->bdev, true);
 		break;
 #endif
--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c
@@ -695,7 +695,7 @@ void ai_pci_up(struct si_pub *sih)
 	sii = container_of(sih, struct si_info, pub);
 
 	if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
-		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, true);
+		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], true);
 }
 
 /* Unconfigure and/or apply various WARs when going down */
@@ -706,7 +706,7 @@ void ai_pci_down(struct si_pub *sih)
 	sii = container_of(sih, struct si_info, pub);
 
 	if (sii->icbus->hosttype == BCMA_HOSTTYPE_PCI)
-		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci, false);
+		bcma_core_pci_extend_L1timer(&sii->icbus->drv_pci[0], false);
 }
 
 /* Enable BT-COEX & Ex-PA for 4313 */
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -5077,7 +5077,7 @@ static int brcms_b_up_prep(struct brcms_
 	 * Configure pci/pcmcia here instead of in brcms_c_attach()
 	 * to allow mfg hotswap:  down, hotswap (chip power cycle), up.
 	 */
-	bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci, wlc_hw->d11core,
+	bcma_core_pci_irq_ctl(&wlc_hw->d11core->bus->drv_pci[0], wlc_hw->d11core,
 			      true);
 
 	/*