mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-24 21:42:04 +02:00
478 lines
13 KiB
C
478 lines
13 KiB
C
|
/*
|
||
|
* Driver for batteries with bq27000 chips inside via HDQ
|
||
|
*
|
||
|
* Copyright 2008 Openmoko, Inc
|
||
|
* Andy Green <andy@openmoko.com>
|
||
|
*
|
||
|
* based on ds2760 driver, original copyright notice for that --->
|
||
|
*
|
||
|
* Copyright © 2007 Anton Vorontsov
|
||
|
* 2004-2007 Matt Reimer
|
||
|
* 2004 Szabolcs Gyurko
|
||
|
*
|
||
|
* Use consistent with the GNU GPL is permitted,
|
||
|
* provided that this copyright notice is
|
||
|
* preserved in its entirety in all copies and derived works.
|
||
|
*
|
||
|
* Author: Anton Vorontsov <cbou@mail.ru>
|
||
|
* February 2007
|
||
|
*
|
||
|
* Matt Reimer <mreimer@vpop.net>
|
||
|
* April 2004, 2005, 2007
|
||
|
*
|
||
|
* Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
|
||
|
* September 2004
|
||
|
*/
|
||
|
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/param.h>
|
||
|
#include <linux/jiffies.h>
|
||
|
#include <linux/delay.h>
|
||
|
#include <linux/pm.h>
|
||
|
#include <linux/workqueue.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/power_supply.h>
|
||
|
#include <linux/bq27000_battery.h>
|
||
|
|
||
|
enum bq27000_regs {
|
||
|
/* RAM regs */
|
||
|
/* read-write after this */
|
||
|
BQ27000_CTRL = 0, /* Device Control Register */
|
||
|
BQ27000_MODE, /* Device Mode Register */
|
||
|
BQ27000_AR_L, /* At-Rate H L */
|
||
|
BQ27000_AR_H,
|
||
|
/* read-only after this */
|
||
|
BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */
|
||
|
BQ27000_ARTTE_H,
|
||
|
BQ27000_TEMP_L, /* Reported Temperature H L */
|
||
|
BQ27000_TEMP_H,
|
||
|
BQ27000_VOLT_L, /* Reported Voltage H L */
|
||
|
BQ27000_VOLT_H,
|
||
|
BQ27000_FLAGS, /* Status Flags */
|
||
|
BQ27000_RSOC, /* Relative State of Charge */
|
||
|
BQ27000_NAC_L, /* Nominal Available Capacity H L */
|
||
|
BQ27000_NAC_H,
|
||
|
BQ27000_CACD_L, /* Discharge Compensated H L */
|
||
|
BQ27000_CACD_H,
|
||
|
BQ27000_CACT_L, /* Temperature Compensated H L */
|
||
|
BQ27000_CACT_H,
|
||
|
BQ27000_LMD_L, /* Last measured discharge H L */
|
||
|
BQ27000_LMD_H,
|
||
|
BQ27000_AI_L, /* Average Current H L */
|
||
|
BQ27000_AI_H,
|
||
|
BQ27000_TTE_L, /* Time to Empty H L */
|
||
|
BQ27000_TTE_H,
|
||
|
BQ27000_TTF_L, /* Time to Full H L */
|
||
|
BQ27000_TTF_H,
|
||
|
BQ27000_SI_L, /* Standby Current H L */
|
||
|
BQ27000_SI_H,
|
||
|
BQ27000_STTE_L, /* Standby Time To Empty H L */
|
||
|
BQ27000_STTE_H,
|
||
|
BQ27000_MLI_L, /* Max Load Current H L */
|
||
|
BQ27000_MLI_H,
|
||
|
BQ27000_MLTTE_L, /* Max Load Time To Empty H L */
|
||
|
BQ27000_MLTTE_H,
|
||
|
BQ27000_SAE_L, /* Available Energy H L */
|
||
|
BQ27000_SAE_H,
|
||
|
BQ27000_AP_L, /* Available Power H L */
|
||
|
BQ27000_AP_H,
|
||
|
BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */
|
||
|
BQ27000_TTECP_H,
|
||
|
BQ27000_CYCL_L, /* Cycle count since learning cycle H L */
|
||
|
BQ27000_CYCL_H,
|
||
|
BQ27000_CYCT_L, /* Cycle Count Total H L */
|
||
|
BQ27000_CYCT_H,
|
||
|
BQ27000_CSOC, /* Compensated State Of Charge */
|
||
|
/* EEPROM regs */
|
||
|
/* read-write after this */
|
||
|
BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */
|
||
|
BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */
|
||
|
BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */
|
||
|
BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */
|
||
|
BQ27000_EE_ISLC, /* Initial Standby Load Current */
|
||
|
BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */
|
||
|
BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */
|
||
|
BQ27000_EE_PKCFG, /* Pack Configuration Values */
|
||
|
BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */
|
||
|
BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */
|
||
|
BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */
|
||
|
};
|
||
|
|
||
|
enum bq27000_status_flags {
|
||
|
BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */
|
||
|
BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */
|
||
|
BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */
|
||
|
BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely innacurate */
|
||
|
BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */
|
||
|
BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */
|
||
|
BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */
|
||
|
BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */
|
||
|
};
|
||
|
|
||
|
#define NANOVOLTS_UNIT 3750
|
||
|
|
||
|
struct bq27000_bat_regs {
|
||
|
int ai;
|
||
|
int flags;
|
||
|
int lmd;
|
||
|
int rsoc;
|
||
|
int temp;
|
||
|
int tte;
|
||
|
int ttf;
|
||
|
int volt;
|
||
|
};
|
||
|
|
||
|
struct bq27000_device_info {
|
||
|
struct device *dev;
|
||
|
struct power_supply bat;
|
||
|
struct power_supply ac;
|
||
|
struct power_supply usb;
|
||
|
struct delayed_work work;
|
||
|
struct bq27000_platform_data *pdata;
|
||
|
|
||
|
struct bq27000_bat_regs regs;
|
||
|
};
|
||
|
|
||
|
static unsigned int cache_time = 5000;
|
||
|
module_param(cache_time, uint, 0644);
|
||
|
MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
|
||
|
|
||
|
/*
|
||
|
* reading 16 bit values over HDQ has a special hazard where the
|
||
|
* hdq device firmware can update the 16-bit register during the time we
|
||
|
* read the two halves. TI document SLUS556D recommends the algorithm here
|
||
|
* to avoid trouble
|
||
|
*/
|
||
|
|
||
|
static int hdq_read16(struct bq27000_device_info *di, int address)
|
||
|
{
|
||
|
int acc;
|
||
|
int high;
|
||
|
int retries = 3;
|
||
|
|
||
|
while (retries--) {
|
||
|
|
||
|
high = (di->pdata->hdq_read)(address + 1); /* high part */
|
||
|
|
||
|
if (high < 0)
|
||
|
return high;
|
||
|
acc = (di->pdata->hdq_read)(address);
|
||
|
if (acc < 0)
|
||
|
return acc;
|
||
|
|
||
|
/* confirm high didn't change between reading it and low */
|
||
|
if (high == (di->pdata->hdq_read)(address + 1))
|
||
|
return (high << 8) | acc;
|
||
|
}
|
||
|
|
||
|
return -ETIME;
|
||
|
}
|
||
|
|
||
|
static void bq27000_battery_external_power_changed(struct power_supply *psy)
|
||
|
{
|
||
|
struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
|
||
|
|
||
|
dev_dbg(di->dev, "%s\n", __FUNCTION__);
|
||
|
schedule_delayed_work(&di->work, 0);
|
||
|
}
|
||
|
|
||
|
static int bq27000_battery_get_property(struct power_supply *psy,
|
||
|
enum power_supply_property psp,
|
||
|
union power_supply_propval *val)
|
||
|
{
|
||
|
int n;
|
||
|
struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
|
||
|
|
||
|
if (di->regs.rsoc < 0 && psp != POWER_SUPPLY_PROP_PRESENT)
|
||
|
return -ENODEV;
|
||
|
|
||
|
switch (psp) {
|
||
|
case POWER_SUPPLY_PROP_STATUS:
|
||
|
val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
|
||
|
|
||
|
if (!di->pdata->get_charger_online_status)
|
||
|
goto use_bat;
|
||
|
if ((di->pdata->get_charger_online_status)()) {
|
||
|
/*
|
||
|
* charger is definitively present
|
||
|
* we report our state in terms of what it says it
|
||
|
* is doing
|
||
|
*/
|
||
|
if (!di->pdata->get_charger_active_status)
|
||
|
goto use_bat;
|
||
|
|
||
|
if ((di->pdata->get_charger_active_status)()) {
|
||
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
||
|
break;
|
||
|
}
|
||
|
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* platform provided definite indication of charger presence,
|
||
|
* and it is telling us it isn't there... but we are on so we
|
||
|
* must be running from battery --->
|
||
|
*/
|
||
|
|
||
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
||
|
break;
|
||
|
|
||
|
use_bat:
|
||
|
/*
|
||
|
* either the charger is not connected, or the
|
||
|
* platform doesn't give info about charger, use battery state
|
||
|
* but... battery state can be out of date by 4 seconds or
|
||
|
* so... use the platform callbacks if possible.
|
||
|
*/
|
||
|
|
||
|
/* no real activity on the battery */
|
||
|
if (di->regs.ai < 2) {
|
||
|
if (!di->regs.ttf)
|
||
|
val->intval = POWER_SUPPLY_STATUS_FULL;
|
||
|
else
|
||
|
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
||
|
break;
|
||
|
}
|
||
|
/* power is actually going in or out... */
|
||
|
if (di->regs.flags < 0)
|
||
|
return di->regs.flags;
|
||
|
if (di->regs.flags & BQ27000_STATUS_CHGS)
|
||
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
||
|
else
|
||
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_HEALTH:
|
||
|
val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
|
||
|
/* Do we have accurate readings... */
|
||
|
if (di->regs.flags < 0)
|
||
|
return di->regs.flags;
|
||
|
if (di->regs.flags & BQ27000_STATUS_VDQ)
|
||
|
val->intval = POWER_SUPPLY_HEALTH_GOOD;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_VOLTAGE_NOW:
|
||
|
if (di->regs.volt < 0)
|
||
|
return di->regs.volt;
|
||
|
/* mV -> uV */
|
||
|
val->intval = di->regs.volt * 1000;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_CURRENT_NOW:
|
||
|
if (di->regs.flags < 0)
|
||
|
return di->regs.flags;
|
||
|
if (di->regs.flags & BQ27000_STATUS_CHGS)
|
||
|
n = -NANOVOLTS_UNIT;
|
||
|
else
|
||
|
n = NANOVOLTS_UNIT;
|
||
|
if (di->regs.ai < 0)
|
||
|
return di->regs.ai;
|
||
|
val->intval = (di->regs.ai * n) / di->pdata->rsense_mohms;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_CHARGE_FULL:
|
||
|
if (di->regs.lmd < 0)
|
||
|
return di->regs.lmd;
|
||
|
val->intval = (di->regs.lmd * 3570) / di->pdata->rsense_mohms;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_TEMP:
|
||
|
if (di->regs.temp < 0)
|
||
|
return di->regs.temp;
|
||
|
/* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/
|
||
|
/* 10926 = 27315 * 4 / 10 */
|
||
|
val->intval = (((long)di->regs.temp * 10l) - 10926) / 4;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_TECHNOLOGY:
|
||
|
val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_CAPACITY:
|
||
|
val->intval = di->regs.rsoc;
|
||
|
if (val->intval < 0)
|
||
|
return val->intval;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_PRESENT:
|
||
|
val->intval = !(di->regs.rsoc < 0);
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
|
||
|
if (di->regs.tte < 0)
|
||
|
return di->regs.tte;
|
||
|
val->intval = 60 * di->regs.tte;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
|
||
|
if (di->regs.ttf < 0)
|
||
|
return di->regs.ttf;
|
||
|
val->intval = 60 * di->regs.ttf;
|
||
|
break;
|
||
|
case POWER_SUPPLY_PROP_ONLINE:
|
||
|
if (di->pdata->get_charger_online_status)
|
||
|
val->intval = (di->pdata->get_charger_online_status)();
|
||
|
else
|
||
|
return -EINVAL;
|
||
|
break;
|
||
|
default:
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static void bq27000_battery_work(struct work_struct *work)
|
||
|
{
|
||
|
struct bq27000_device_info *di =
|
||
|
container_of(work, struct bq27000_device_info, work.work);
|
||
|
|
||
|
if ((di->pdata->hdq_initialized)()) {
|
||
|
struct bq27000_bat_regs regs;
|
||
|
|
||
|
regs.ai = hdq_read16(di, BQ27000_AI_L);
|
||
|
regs.flags = (di->pdata->hdq_read)(BQ27000_FLAGS);
|
||
|
regs.lmd = hdq_read16(di, BQ27000_LMD_L);
|
||
|
regs.rsoc = (di->pdata->hdq_read)(BQ27000_RSOC);
|
||
|
regs.temp = hdq_read16(di, BQ27000_TEMP_L);
|
||
|
regs.tte = hdq_read16(di, BQ27000_TTE_L);
|
||
|
regs.ttf = hdq_read16(di, BQ27000_TTF_L);
|
||
|
regs.volt = hdq_read16(di, BQ27000_VOLT_L);
|
||
|
|
||
|
if (memcmp (®s, &di->regs, sizeof(regs)) != 0) {
|
||
|
di->regs = regs;
|
||
|
power_supply_changed(&di->bat);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (!schedule_delayed_work(&di->work, cache_time))
|
||
|
dev_err(di->dev, "battery service reschedule failed\n");
|
||
|
}
|
||
|
|
||
|
static enum power_supply_property bq27000_battery_props[] = {
|
||
|
POWER_SUPPLY_PROP_STATUS,
|
||
|
POWER_SUPPLY_PROP_HEALTH,
|
||
|
POWER_SUPPLY_PROP_VOLTAGE_NOW,
|
||
|
POWER_SUPPLY_PROP_CURRENT_NOW,
|
||
|
POWER_SUPPLY_PROP_CHARGE_FULL,
|
||
|
POWER_SUPPLY_PROP_TEMP,
|
||
|
POWER_SUPPLY_PROP_TECHNOLOGY,
|
||
|
POWER_SUPPLY_PROP_PRESENT,
|
||
|
POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
|
||
|
POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
|
||
|
POWER_SUPPLY_PROP_CAPACITY,
|
||
|
POWER_SUPPLY_PROP_ONLINE
|
||
|
};
|
||
|
|
||
|
static int bq27000_battery_probe(struct platform_device *pdev)
|
||
|
{
|
||
|
int retval = 0;
|
||
|
struct bq27000_device_info *di;
|
||
|
struct bq27000_platform_data *pdata;
|
||
|
|
||
|
dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n");
|
||
|
|
||
|
di = kzalloc(sizeof(*di), GFP_KERNEL);
|
||
|
if (!di) {
|
||
|
retval = -ENOMEM;
|
||
|
goto di_alloc_failed;
|
||
|
}
|
||
|
|
||
|
platform_set_drvdata(pdev, di);
|
||
|
|
||
|
pdata = pdev->dev.platform_data;
|
||
|
di->dev = &pdev->dev;
|
||
|
/* di->w1_dev = pdev->dev.parent; */
|
||
|
di->bat.name = pdata->name;
|
||
|
di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
|
||
|
di->bat.properties = bq27000_battery_props;
|
||
|
di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props);
|
||
|
di->bat.get_property = bq27000_battery_get_property;
|
||
|
di->bat.external_power_changed =
|
||
|
bq27000_battery_external_power_changed;
|
||
|
di->bat.use_for_apm = 1;
|
||
|
di->pdata = pdata;
|
||
|
|
||
|
retval = power_supply_register(&pdev->dev, &di->bat);
|
||
|
if (retval) {
|
||
|
dev_err(di->dev, "failed to register battery\n");
|
||
|
goto batt_failed;
|
||
|
}
|
||
|
|
||
|
INIT_DELAYED_WORK(&di->work, bq27000_battery_work);
|
||
|
|
||
|
if (!schedule_delayed_work(&di->work, 0))
|
||
|
dev_err(di->dev, "failed to schedule bq27000_battery_work\n");
|
||
|
|
||
|
return 0;
|
||
|
|
||
|
batt_failed:
|
||
|
kfree(di);
|
||
|
di_alloc_failed:
|
||
|
return retval;
|
||
|
}
|
||
|
|
||
|
static int bq27000_battery_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
struct bq27000_device_info *di = platform_get_drvdata(pdev);
|
||
|
|
||
|
cancel_delayed_work(&di->work);
|
||
|
|
||
|
power_supply_unregister(&di->bat);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
void bq27000_charging_state_change(struct platform_device *pdev)
|
||
|
{
|
||
|
struct bq27000_device_info *di = platform_get_drvdata(pdev);
|
||
|
|
||
|
if (!di)
|
||
|
return;
|
||
|
}
|
||
|
EXPORT_SYMBOL_GPL(bq27000_charging_state_change);
|
||
|
|
||
|
#ifdef CONFIG_PM
|
||
|
|
||
|
static int bq27000_battery_suspend(struct platform_device *pdev,
|
||
|
pm_message_t state)
|
||
|
{
|
||
|
struct bq27000_device_info *di = platform_get_drvdata(pdev);
|
||
|
|
||
|
cancel_delayed_work(&di->work);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static int bq27000_battery_resume(struct platform_device *pdev)
|
||
|
{
|
||
|
struct bq27000_device_info *di = platform_get_drvdata(pdev);
|
||
|
|
||
|
schedule_delayed_work(&di->work, 0);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#else
|
||
|
|
||
|
#define bq27000_battery_suspend NULL
|
||
|
#define bq27000_battery_resume NULL
|
||
|
|
||
|
#endif /* CONFIG_PM */
|
||
|
|
||
|
static struct platform_driver bq27000_battery_driver = {
|
||
|
.driver = {
|
||
|
.name = "bq27000-battery",
|
||
|
},
|
||
|
.probe = bq27000_battery_probe,
|
||
|
.remove = bq27000_battery_remove,
|
||
|
.suspend = bq27000_battery_suspend,
|
||
|
.resume = bq27000_battery_resume,
|
||
|
};
|
||
|
|
||
|
static int __init bq27000_battery_init(void)
|
||
|
{
|
||
|
return platform_driver_register(&bq27000_battery_driver);
|
||
|
}
|
||
|
|
||
|
static void __exit bq27000_battery_exit(void)
|
||
|
{
|
||
|
platform_driver_unregister(&bq27000_battery_driver);
|
||
|
}
|
||
|
|
||
|
module_init(bq27000_battery_init);
|
||
|
module_exit(bq27000_battery_exit);
|
||
|
|
||
|
MODULE_LICENSE("GPL");
|
||
|
MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
|
||
|
MODULE_DESCRIPTION("bq27000 battery driver");
|