mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-25 16:22:48 +02:00
377 lines
13 KiB
C
377 lines
13 KiB
C
|
/*
|
|||
|
|
* linux/drivers/video/jzslcd.h -- Ingenic On-Chip SLCD frame buffer device
|
|||
|
|
*
|
|||
|
|
* Copyright (C) 2005-2007, Ingenic Semiconductor Inc.
|
|||
|
|
*
|
|||
|
|
* This program is free software; you can redistribute it and/or modify
|
|||
|
|
* it under the terms of the GNU General Public License version 2 as
|
|||
|
|
* published by the Free Software Foundation.
|
|||
|
|
*
|
|||
|
|
*/
|
|||
|
|
|
|||
|
|
#ifndef __JZSLCD_H__
|
|||
|
|
#define __JZSLCD_H__
|
|||
|
|
|
|||
|
|
#define UINT16 unsigned short
|
|||
|
|
#define UINT32 unsigned int
|
|||
|
|
|
|||
|
|
#define NR_PALETTE 256
|
|||
|
|
/* Jz LCDFB supported I/O controls. */
|
|||
|
|
#define FBIOSETBACKLIGHT 0x4688
|
|||
|
|
#define FBIODISPON 0x4689
|
|||
|
|
#define FBIODISPOFF 0x468a
|
|||
|
|
#define FBIORESET 0x468b
|
|||
|
|
#define FBIOPRINT_REG 0x468c
|
|||
|
|
#define FBIO_REFRESH_ALWAYS 0x468d
|
|||
|
|
#define FBIO_REFRESH_EVENTS 0x468e
|
|||
|
|
#define FBIO_DO_REFRESH 0x468f
|
|||
|
|
#define FBIO_SET_REG 0x4690
|
|||
|
|
|
|||
|
|
#ifdef CONFIG_JZ_SLCD_LGDP4551
|
|||
|
|
#define PIN_CS_N (32*2+18) /* Chip select :SLCD_WR: GPC18 */
|
|||
|
|
#define PIN_RESET_N (32*2+21) /* LCD reset :SLCD_RST: GPC21*/
|
|||
|
|
#define PIN_RS_N (32*2+19)
|
|||
|
|
|
|||
|
|
#define __slcd_special_pin_init() \
|
|||
|
|
do { \
|
|||
|
|
__gpio_as_output(PIN_CS_N); \
|
|||
|
|
__gpio_as_output(PIN_RESET_N); \
|
|||
|
|
__gpio_clear_pin(PIN_CS_N); /* Clear CS */\
|
|||
|
|
mdelay(100); \
|
|||
|
|
} while(0)
|
|||
|
|
|
|||
|
|
#define __slcd_special_on() \
|
|||
|
|
do { /* RESET# */ \
|
|||
|
|
__gpio_set_pin(PIN_RESET_N); \
|
|||
|
|
mdelay(10); \
|
|||
|
|
__gpio_clear_pin(PIN_RESET_N); \
|
|||
|
|
mdelay(10); \
|
|||
|
|
__gpio_set_pin(PIN_RESET_N); \
|
|||
|
|
mdelay(100); \
|
|||
|
|
Mcupanel_RegSet(0x0015,0x0050); \
|
|||
|
|
Mcupanel_RegSet(0x0011,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0010,0x3628); \
|
|||
|
|
Mcupanel_RegSet(0x0012,0x0002); \
|
|||
|
|
Mcupanel_RegSet(0x0013,0x0E47); \
|
|||
|
|
udelay(100); \
|
|||
|
|
Mcupanel_RegSet(0x0012,0x0012); \
|
|||
|
|
udelay(100); \
|
|||
|
|
Mcupanel_RegSet(0x0010,0x3620); \
|
|||
|
|
Mcupanel_RegSet(0x0013,0x2E47); \
|
|||
|
|
udelay(50); \
|
|||
|
|
Mcupanel_RegSet(0x0030,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0031,0x0502); \
|
|||
|
|
Mcupanel_RegSet(0x0032,0x0307); \
|
|||
|
|
Mcupanel_RegSet(0x0033,0x0304); \
|
|||
|
|
Mcupanel_RegSet(0x0034,0x0004); \
|
|||
|
|
Mcupanel_RegSet(0x0035,0x0401); \
|
|||
|
|
Mcupanel_RegSet(0x0036,0x0707); \
|
|||
|
|
Mcupanel_RegSet(0x0037,0x0303); \
|
|||
|
|
Mcupanel_RegSet(0x0038,0x1E02); \
|
|||
|
|
Mcupanel_RegSet(0x0039,0x1E02); \
|
|||
|
|
Mcupanel_RegSet(0x0001,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0002,0x0300); \
|
|||
|
|
if (jzfb.bpp == 16) \
|
|||
|
|
Mcupanel_RegSet(0x0003,0x10B8); /*8-bit system interface two transfers
|
|||
|
|
up:0x10B8 down:0x1088 left:0x1090 right:0x10a0*/ \
|
|||
|
|
else \
|
|||
|
|
if (jzfb.bpp == 32)\
|
|||
|
|
Mcupanel_RegSet(0x0003,0xD0B8);/*8-bit system interface three transfers,666
|
|||
|
|
up:0xD0B8 down:0xD088 left:0xD090 right:0xD0A0*/ \
|
|||
|
|
Mcupanel_RegSet(0x0008,0x0204);\
|
|||
|
|
Mcupanel_RegSet(0x000A,0x0008);\
|
|||
|
|
Mcupanel_RegSet(0x0060,0x3100);\
|
|||
|
|
Mcupanel_RegSet(0x0061,0x0001);\
|
|||
|
|
Mcupanel_RegSet(0x0090,0x0052);\
|
|||
|
|
Mcupanel_RegSet(0x0092,0x000F);\
|
|||
|
|
Mcupanel_RegSet(0x0093,0x0001);\
|
|||
|
|
Mcupanel_RegSet(0x009A,0x0008);\
|
|||
|
|
Mcupanel_RegSet(0x00A3,0x0010);\
|
|||
|
|
Mcupanel_RegSet(0x0050,0x0000);\
|
|||
|
|
Mcupanel_RegSet(0x0051,0x00EF);\
|
|||
|
|
Mcupanel_RegSet(0x0052,0x0000);\
|
|||
|
|
Mcupanel_RegSet(0x0053,0x018F);\
|
|||
|
|
/*===Display_On_Function=== */ \
|
|||
|
|
Mcupanel_RegSet(0x0007,0x0001);\
|
|||
|
|
Mcupanel_RegSet(0x0007,0x0021);\
|
|||
|
|
Mcupanel_RegSet(0x0007,0x0023);\
|
|||
|
|
Mcupanel_RegSet(0x0007,0x0033);\
|
|||
|
|
Mcupanel_RegSet(0x0007,0x0133);\
|
|||
|
|
Mcupanel_Command(0x0022);/*Write Data to GRAM */ \
|
|||
|
|
udelay(1); \
|
|||
|
|
Mcupanel_SetAddr(0,0); \
|
|||
|
|
mdelay(100); \
|
|||
|
|
} while (0)
|
|||
|
|
|
|||
|
|
#define __slcd_special_off() \
|
|||
|
|
do { \
|
|||
|
|
} while(0)
|
|||
|
|
#endif /*CONFIG_JZ_SLCD_LGDP4551_xxBUS*/
|
|||
|
|
|
|||
|
|
#ifdef CONFIG_JZ_SLCD_SPFD5420A
|
|||
|
|
|
|||
|
|
//#define PIN_CS_N (32*2+18) // Chip select //GPC18;
|
|||
|
|
#define PIN_CS_N (32*2+22) // Chip select //GPC18;
|
|||
|
|
#define PIN_RESET_N (32*1+18) // LCD reset //GPB18;
|
|||
|
|
#define PIN_RS_N (32*2+19) // LCD RS //GPC19;
|
|||
|
|
#define PIN_POWER_N (32*3+0) //Power off //GPD0;
|
|||
|
|
#define PIN_FMARK_N (32*3+1) //fmark //GPD1;
|
|||
|
|
|
|||
|
|
#define GAMMA() \
|
|||
|
|
do { \
|
|||
|
|
Mcupanel_RegSet(0x0300,0x0101); \
|
|||
|
|
Mcupanel_RegSet(0x0301,0x0b27); \
|
|||
|
|
Mcupanel_RegSet(0x0302,0x132a); \
|
|||
|
|
Mcupanel_RegSet(0x0303,0x2a13); \
|
|||
|
|
Mcupanel_RegSet(0x0304,0x270b); \
|
|||
|
|
Mcupanel_RegSet(0x0305,0x0101); \
|
|||
|
|
Mcupanel_RegSet(0x0306,0x1205); \
|
|||
|
|
Mcupanel_RegSet(0x0307,0x0512); \
|
|||
|
|
Mcupanel_RegSet(0x0308,0x0005); \
|
|||
|
|
Mcupanel_RegSet(0x0309,0x0003); \
|
|||
|
|
Mcupanel_RegSet(0x030a,0x0f04); \
|
|||
|
|
Mcupanel_RegSet(0x030b,0x0f00); \
|
|||
|
|
Mcupanel_RegSet(0x030c,0x000f); \
|
|||
|
|
Mcupanel_RegSet(0x030d,0x040f); \
|
|||
|
|
Mcupanel_RegSet(0x030e,0x0300); \
|
|||
|
|
Mcupanel_RegSet(0x030f,0x0500); \
|
|||
|
|
/*** secorrect gamma2 ***/ \
|
|||
|
|
Mcupanel_RegSet(0x0400,0x3500); \
|
|||
|
|
Mcupanel_RegSet(0x0401,0x0001); \
|
|||
|
|
Mcupanel_RegSet(0x0404,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0500,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0501,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0502,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0503,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0504,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0505,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0600,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0606,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x06f0,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x07f0,0x5420); \
|
|||
|
|
Mcupanel_RegSet(0x07f3,0x288a); \
|
|||
|
|
Mcupanel_RegSet(0x07f4,0x0022); \
|
|||
|
|
Mcupanel_RegSet(0x07f5,0x0001); \
|
|||
|
|
Mcupanel_RegSet(0x07f0,0x0000); \
|
|||
|
|
} while(0)
|
|||
|
|
|
|||
|
|
#define __slcd_special_on() \
|
|||
|
|
do { \
|
|||
|
|
__gpio_set_pin(PIN_RESET_N); \
|
|||
|
|
mdelay(10); \
|
|||
|
|
__gpio_clear_pin(PIN_RESET_N); \
|
|||
|
|
mdelay(10); \
|
|||
|
|
__gpio_set_pin(PIN_RESET_N); \
|
|||
|
|
mdelay(100); \
|
|||
|
|
if (jzfb.bus == 18) {\
|
|||
|
|
Mcupanel_RegSet(0x0606,0x0000); \
|
|||
|
|
udelay(10); \
|
|||
|
|
Mcupanel_RegSet(0x0007,0x0001); \
|
|||
|
|
udelay(10); \
|
|||
|
|
Mcupanel_RegSet(0x0110,0x0001); \
|
|||
|
|
udelay(10); \
|
|||
|
|
Mcupanel_RegSet(0x0100,0x17b0); \
|
|||
|
|
Mcupanel_RegSet(0x0101,0x0147); \
|
|||
|
|
Mcupanel_RegSet(0x0102,0x019d); \
|
|||
|
|
Mcupanel_RegSet(0x0103,0x8600); \
|
|||
|
|
Mcupanel_RegSet(0x0281,0x0010); \
|
|||
|
|
udelay(10); \
|
|||
|
|
Mcupanel_RegSet(0x0102,0x01bd); \
|
|||
|
|
udelay(10); \
|
|||
|
|
/************initial************/\
|
|||
|
|
Mcupanel_RegSet(0x0000,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0001,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0002,0x0400); \
|
|||
|
|
Mcupanel_RegSet(0x0003,0x1288); /*up:0x1288 down:0x12B8 left:0x1290 right:0x12A0*/ \
|
|||
|
|
Mcupanel_RegSet(0x0006,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0008,0x0503); \
|
|||
|
|
Mcupanel_RegSet(0x0009,0x0001); \
|
|||
|
|
Mcupanel_RegSet(0x000b,0x0010); \
|
|||
|
|
Mcupanel_RegSet(0x000c,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x000f,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0007,0x0001); \
|
|||
|
|
Mcupanel_RegSet(0x0010,0x0010); \
|
|||
|
|
Mcupanel_RegSet(0x0011,0x0202); \
|
|||
|
|
Mcupanel_RegSet(0x0012,0x0300); \
|
|||
|
|
Mcupanel_RegSet(0x0020,0x021e); \
|
|||
|
|
Mcupanel_RegSet(0x0021,0x0202); \
|
|||
|
|
Mcupanel_RegSet(0x0022,0x0100); \
|
|||
|
|
Mcupanel_RegSet(0x0090,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0092,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0100,0x16b0); \
|
|||
|
|
Mcupanel_RegSet(0x0101,0x0147); \
|
|||
|
|
Mcupanel_RegSet(0x0102,0x01bd); \
|
|||
|
|
Mcupanel_RegSet(0x0103,0x2c00); \
|
|||
|
|
Mcupanel_RegSet(0x0107,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0110,0x0001); \
|
|||
|
|
Mcupanel_RegSet(0x0210,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0211,0x00ef); \
|
|||
|
|
Mcupanel_RegSet(0x0212,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0213,0x018f); \
|
|||
|
|
Mcupanel_RegSet(0x0280,0x0000); \
|
|||
|
|
Mcupanel_RegSet(0x0281,0x0001); \
|
|||
|
|
Mcupanel_RegSet(0x0282,0x0000); \
|
|||
|
|
GAMMA(); \
|
|||
|
|
Mcupanel_RegSet(0x0007,0x0173); \
|
|||
|
|
} else { \
|
|||
|
|
Mcupanel_RegSet(0x0600, 0x0001); /*soft reset*/ \
|
|||
|
|
mdelay(10); \
|
|||
|
|
Mcupanel_RegSet(0x0600, 0x0000); /*soft reset*/ \
|
|||
|
|
mdelay(10); \
|
|||
|
|
Mcupanel_RegSet(0x0606, 0x0000); /*i80-i/F Endian Control*/ \
|
|||
|
|
/*===User setting=== */ \
|
|||
|
|
Mcupanel_RegSet(0x0001, 0x0000);/* Driver Output Control-----0x0100 SM(bit10) | 0x400*/ \
|
|||
|
|
Mcupanel_RegSet(0x0002, 0x0100); /*LCD Driving Wave Control 0x0100 */ \
|
|||
|
|
if (jzfb.bpp == 16) \
|
|||
|
|
Mcupanel_RegSet(0x0003, 0x50A8);/*Entry Mode 0x1030*/ \
|
|||
|
|
else /*bpp = 18*/ \
|
|||
|
|
Mcupanel_RegSet(0x0003, 0x1010 | 0xC8); /*Entry Mode 0x1030*/ \
|
|||
|
|
/*#endif */ \
|
|||
|
|
Mcupanel_RegSet(0x0006, 0x0000); /*Outline Sharpening Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0008, 0x0808); /*Sets the number of lines for front/back porch period*/\
|
|||
|
|
Mcupanel_RegSet(0x0009, 0x0001); /*Display Control 3 */\
|
|||
|
|
Mcupanel_RegSet(0x000B, 0x0010); /*Low Power Control*/\
|
|||
|
|
Mcupanel_RegSet(0x000C, 0x0000); /*External Display Interface Control 1 /*0x0001*/\
|
|||
|
|
Mcupanel_RegSet(0x000F, 0x0000); /*External Display Interface Control 2 */\
|
|||
|
|
Mcupanel_RegSet(0x0400, 0xB104);/*Base Image Number of Line---GS(bit15) | 0x8000*/ \
|
|||
|
|
Mcupanel_RegSet(0x0401, 0x0001); /*Base Image Display 0x0001*/\
|
|||
|
|
Mcupanel_RegSet(0x0404, 0x0000); /*Base Image Vertical Scroll Control 0x0000*/\
|
|||
|
|
Mcupanel_RegSet(0x0500, 0x0000); /*Partial Image 1: Display Position*/\
|
|||
|
|
Mcupanel_RegSet(0x0501, 0x0000); /*RAM Address (Start Line Address) */\
|
|||
|
|
Mcupanel_RegSet(0x0502, 0x018f); /*RAM Address (End Line Address) */ \
|
|||
|
|
Mcupanel_RegSet(0x0503, 0x0000); /*Partial Image 2: Display Position RAM Address*/\
|
|||
|
|
Mcupanel_RegSet(0x0504, 0x0000); /*RAM Address (Start Line Address) */\
|
|||
|
|
Mcupanel_RegSet(0x0505, 0x0000); /*RAM Address (End Line Address)*/\
|
|||
|
|
/*Panel interface control===*/\
|
|||
|
|
Mcupanel_RegSet(0x0010, 0x0011); /*Division Ratio,Clocks per Line 14 */\
|
|||
|
|
mdelay(10); \
|
|||
|
|
Mcupanel_RegSet(0x0011, 0x0202); /*Division Ratio,Clocks per Line*/\
|
|||
|
|
Mcupanel_RegSet(0x0012, 0x0300); /*Sets low power VCOM drive period. */\
|
|||
|
|
mdelay(10); \
|
|||
|
|
Mcupanel_RegSet(0x0020, 0x021e); /*Panel Interface Control 4 */\
|
|||
|
|
Mcupanel_RegSet(0x0021, 0x0202); /*Panel Interface Control 5 */\
|
|||
|
|
Mcupanel_RegSet(0x0022, 0x0100); /*Panel Interface Control 6*/\
|
|||
|
|
Mcupanel_RegSet(0x0090, 0x0000); /*Frame Marker Control */\
|
|||
|
|
Mcupanel_RegSet(0x0092, 0x0000); /*MDDI Sub-display Control */\
|
|||
|
|
/*===Gamma setting=== */\
|
|||
|
|
Mcupanel_RegSet(0x0300, 0x0101); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0301, 0x0000); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0302, 0x0016); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0303, 0x2913); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0304, 0x260B); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0305, 0x0101); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0306, 0x1204); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0307, 0x0415); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0308, 0x0205); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x0309, 0x0303); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x030a, 0x0E05); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x030b, 0x0D01); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x030c, 0x010D); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x030d, 0x050E); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x030e, 0x0303); /*γ Control*/\
|
|||
|
|
Mcupanel_RegSet(0x030f, 0x0502); /*γ Control*/\
|
|||
|
|
/*===Power on sequence===*/\
|
|||
|
|
Mcupanel_RegSet(0x0007, 0x0001); /*Display Control 1*/\
|
|||
|
|
Mcupanel_RegSet(0x0110, 0x0001); /*Power supply startup enable bit*/\
|
|||
|
|
Mcupanel_RegSet(0x0112, 0x0060); /*Power Control 7*/\
|
|||
|
|
Mcupanel_RegSet(0x0100, 0x16B0); /*Power Control 1 */\
|
|||
|
|
Mcupanel_RegSet(0x0101, 0x0115); /*Power Control 2*/\
|
|||
|
|
Mcupanel_RegSet(0x0102, 0x0119); /*Starts VLOUT3,Sets the VREG1OUT.*/\
|
|||
|
|
mdelay(50); \
|
|||
|
|
Mcupanel_RegSet(0x0103, 0x2E00); /*set the amplitude of VCOM*/\
|
|||
|
|
mdelay(50);\
|
|||
|
|
Mcupanel_RegSet(0x0282, 0x0093);/*0x008E);/*0x0093); /*VCOMH voltage*/\
|
|||
|
|
Mcupanel_RegSet(0x0281, 0x000A); /*Selects the factor of VREG1OUT to generate VCOMH. */\
|
|||
|
|
Mcupanel_RegSet(0x0102, 0x01BE); /*Starts VLOUT3,Sets the VREG1OUT.*/\
|
|||
|
|
mdelay(10);\
|
|||
|
|
/*Address */\
|
|||
|
|
Mcupanel_RegSet(0x0210, 0x0000); /*Window Horizontal RAM Address Start*/\
|
|||
|
|
Mcupanel_RegSet(0x0211, 0x00ef); /*Window Horizontal RAM Address End*/\
|
|||
|
|
Mcupanel_RegSet(0x0212, 0x0000); /*Window Vertical RAM Address Start*/\
|
|||
|
|
Mcupanel_RegSet(0x0213, 0x018f); /*Window Vertical RAM Address End */\
|
|||
|
|
Mcupanel_RegSet(0x0200, 0x0000); /*RAM Address Set (Horizontal Address)*/\
|
|||
|
|
Mcupanel_RegSet(0x0201, 0x018f); /*RAM Address Set (Vertical Address)*/ \
|
|||
|
|
/*===Display_On_Function===*/\
|
|||
|
|
Mcupanel_RegSet(0x0007, 0x0021); /*Display Control 1 */\
|
|||
|
|
mdelay(50); /*40*/\
|
|||
|
|
Mcupanel_RegSet(0x0007, 0x0061); /*Display Control 1 */\
|
|||
|
|
mdelay(50); /*100*/\
|
|||
|
|
Mcupanel_RegSet(0x0007, 0x0173); /*Display Control 1 */\
|
|||
|
|
mdelay(50); /*300*/\
|
|||
|
|
}\
|
|||
|
|
Mcupanel_Command(0x0202); /*Write Data to GRAM */ \
|
|||
|
|
udelay(10);\
|
|||
|
|
Mcupanel_SetAddr(0,0);\
|
|||
|
|
udelay(100);\
|
|||
|
|
} while(0)
|
|||
|
|
|
|||
|
|
#define __slcd_special_pin_init() \
|
|||
|
|
do { \
|
|||
|
|
__gpio_as_output(PIN_CS_N); \
|
|||
|
|
__gpio_as_output(PIN_RESET_N); \
|
|||
|
|
__gpio_clear_pin(PIN_CS_N); /* Clear CS */ \
|
|||
|
|
__gpio_as_output(PIN_POWER_N); \
|
|||
|
|
mdelay(100); \
|
|||
|
|
} while(0)
|
|||
|
|
|
|||
|
|
#endif /*CONFIG_JZ_SLCD_SPFD5420A*/
|
|||
|
|
|
|||
|
|
#ifndef __slcd_special_pin_init
|
|||
|
|
#define __slcd_special_pin_init()
|
|||
|
|
#endif
|
|||
|
|
#ifndef __slcd_special_on
|
|||
|
|
#define __slcd_special_on()
|
|||
|
|
#endif
|
|||
|
|
#ifndef __slcd_special_off
|
|||
|
|
#define __slcd_special_off()
|
|||
|
|
#endif
|
|||
|
|
|
|||
|
|
/*
|
|||
|
|
* Platform specific definition
|
|||
|
|
*/
|
|||
|
|
#if defined(CONFIG_SOC_JZ4740)
|
|||
|
|
#if defined(CONFIG_JZ4740_PAVO)
|
|||
|
|
#define GPIO_PWM 123 /* GP_D27 */
|
|||
|
|
#define PWM_CHN 4 /* pwm channel */
|
|||
|
|
#define PWM_FULL 101
|
|||
|
|
/* 100 level: 0,1,...,100 */
|
|||
|
|
#define __slcd_set_backlight_level(n)\
|
|||
|
|
do { \
|
|||
|
|
__gpio_as_output(32*3+27); \
|
|||
|
|
__gpio_set_pin(32*3+27); \
|
|||
|
|
} while (0)
|
|||
|
|
|
|||
|
|
#define __slcd_close_backlight() \
|
|||
|
|
do { \
|
|||
|
|
__gpio_as_output(GPIO_PWM); \
|
|||
|
|
__gpio_clear_pin(GPIO_PWM); \
|
|||
|
|
} while (0)
|
|||
|
|
|
|||
|
|
#else
|
|||
|
|
|
|||
|
|
#define __slcd_set_backlight_level(n)
|
|||
|
|
#define __slcd_close_backlight()
|
|||
|
|
|
|||
|
|
#endif /* #if defined(CONFIG_MIPS_JZ4740_PAVO) */
|
|||
|
|
|
|||
|
|
#define __slcd_display_pin_init() \
|
|||
|
|
do { \
|
|||
|
|
__slcd_special_pin_init(); \
|
|||
|
|
} while (0)
|
|||
|
|
|
|||
|
|
#define __slcd_display_on() \
|
|||
|
|
do { \
|
|||
|
|
__slcd_special_on(); \
|
|||
|
|
__slcd_set_backlight_level(80); \
|
|||
|
|
} while (0)
|
|||
|
|
|
|||
|
|
#define __slcd_display_off() \
|
|||
|
|
do { \
|
|||
|
|
__slcd_special_off(); \
|
|||
|
|
__slcd_close_backlight(); \
|
|||
|
|
} while (0)
|
|||
|
|
|
|||
|
|
#endif /* CONFIG_SOC_JZ4740 */
|
|||
|
|
#endif /*__JZSLCD_H__*/
|
|||
|
|
|