openwrt-xburst/target/linux/mpc83xx/patches-3.3/120-ucc_tdm.patch

--- /dev/null
+++ b/drivers/misc/ucc_tdm.h
@@ -0,0 +1,221 @@
+/*
+ * drivers/misc/ucc_tdm.h
+ *
+ * UCC Based Linux TDM Driver
+ * This driver is designed to support UCC based TDM for PowerPC processors.
+ * This driver can interface with SLIC device to run VOIP kind of
+ * applications.
+ *
+ * Author: Ashish Kalra & Poonam Aggrwal
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef TDM_H
+#define TDM_H
+
+#define NUM_TS 8
+#define ACTIVE_CH 8
+
+/* SAMPLE_DEPTH is the sample depth is the number of frames before
+ * an interrupt. Must be a multiple of 4
+ */
+#define SAMPLE_DEPTH 80
+
+/* define the number of Rx interrupts to go by for initial stuttering */
+#define STUTTER_INT_CNT 1
+
+/* BMRx Field Descriptions to specify tstate and rstate in UCC parameter RAM*/
+#define EN_BUS_SNOOPING 0x20
+#define BE_BO 0x10
+
+/* UPSMR Register for Transparent UCC controller Bit definitions*/
+#define NBO 0x00000000 /* Normal Mode 1 bit of data per clock */
+
+/* SI Mode register bit definitions */
+#define NORMAL_OPERATION 0x0000
+#define AUTO_ECHO 0x0400
+#define INTERNAL_LB 0x0800
+#define CONTROL_LB 0x0c00
+#define SIMODE_CRT (0x8000 >> 9)
+#define SIMODE_SL (0x8000 >> 10)
+#define SIMODE_CE (0x8000 >> 11)
+#define SIMODE_FE (0x8000 >> 12)
+#define SIMODE_GM (0x8000 >> 13)
+#define SIMODE_TFSD(val) (val)
+#define SIMODE_RFSD(val) ((val) << 8)
+
+#define SI_TDM_MODE_REGISTER_OFFSET 0
+
+#define R_CM 0x02000000
+#define T_CM 0x02000000
+
+#define SET_RX_SI_RAM(n, val) \
+ out_be16((u16 *)&qe_immr->sir.rx[(n)*2], (u16)(val))
+
+#define SET_TX_SI_RAM(n, val) \
+ out_be16((u16 *)&qe_immr->sir.tx[(n)*2], (u16)(val))
+
+/* SI RAM entries */
+#define SIR_LAST 0x0001
+#define SIR_CNT(n) ((n) << 2)
+#define SIR_BYTE 0x0002
+#define SIR_BIT 0x0000
+#define SIR_IDLE 0
+#define SIR_UCC(uccx) (((uccx+9)) << 5)
+
+/* BRGC Register Bit definitions */
+#define BRGC_RESET (0x1<<17)
+#define BRGC_EN (0x1<<16)
+#define BRGC_EXTC_QE (0x00<<14)
+#define BRGC_EXTC_CLK3 (0x01<<14)
+#define BRGC_EXTC_CLK5 (0x01<<15)
+#define BRGC_EXTC_CLK9 (0x01<<14)
+#define BRGC_EXTC_CLK11 (0x01<<14)
+#define BRGC_EXTC_CLK13 (0x01<<14)
+#define BRGC_EXTC_CLK15 (0x01<<15)
+#define BRGC_ATB (0x1<<13)
+#define BRGC_DIV16 (0x1)
+
+/* structure representing UCC transparent parameter RAM */
+struct ucc_transparent_pram {
+ __be16 riptr;
+ __be16 tiptr;
+ __be16 res0;
+ __be16 mrblr;
+ __be32 rstate;
+ __be32 rbase;
+ __be16 rbdstat;
+ __be16 rbdlen;
+ __be32 rdptr;
+ __be32 tstate;
+ __be32 tbase;
+ __be16 tbdstat;
+ __be16 tbdlen;
+ __be32 tdptr;
+ __be32 rbptr;
+ __be32 tbptr;
+ __be32 rcrc;
+ __be32 res1;
+ __be32 tcrc;
+ __be32 res2;
+ __be32 res3;
+ __be32 c_mask;
+ __be32 c_pres;
+ __be16 disfc;
+ __be16 crcec;
+ __be32 res4[4];
+ __be16 ts_tmp;
+ __be16 tmp_mb;
+};
+
+#define UCC_TRANSPARENT_PRAM_SIZE 0x100
+
+struct tdm_cfg {
+ u8 com_pin; /* Common receive and transmit pins
+ * 0 = separate pins
+ * 1 = common pins
+ */
+
+ u8 fr_sync_level; /* SLx bit Frame Sync Polarity
+ * 0 = L1R/TSYNC active logic "1"
+ * 1 = L1R/TSYNC active logic "0"
+ */
+
+ u8 clk_edge; /* CEx bit Tx Rx Clock Edge
+ * 0 = TX data on rising edge of clock
+ * RX data on falling edge
+ * 1 = TX data on falling edge of clock
+ * RX data on rising edge
+ */
+
+ u8 fr_sync_edge; /* FEx bit Frame sync edge
+ * Determine when the sync pulses are sampled
+ * 0 = Falling edge
+ * 1 = Rising edge
+ */
+
+ u8 rx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
+ * 00 = no bit delay
+ * 01 = 1 bit delay
+ * 10 = 2 bit delay
+ * 11 = 3 bit delay
+ */
+
+ u8 tx_fr_sync_delay; /* TFSDx/RFSDx bits Frame Sync Delay
+ * 00 = no bit delay
+ * 01 = 1 bit delay
+ * 10 = 2 bit delay
+ * 11 = 3 bit delay
+ */
+
+ u8 active_num_ts; /* Number of active time slots in TDM
+ * assume same active Rx/Tx time slots
+ */
+};
+
+struct ucc_tdm_info {
+ struct ucc_fast_info uf_info;
+ u32 ucc_busy;
+};
+
+struct tdm_ctrl {
+ u32 device_busy;
+ struct device *device;
+ struct ucc_fast_private *uf_private;
+ struct ucc_tdm_info *ut_info;
+ u32 tdm_port; /* port for this tdm:TDMA,TDMB,TDMC,TDMD */
+ u32 si; /* serial interface: 0 or 1 */
+ struct ucc_fast __iomem *uf_regs; /* UCC Fast registers */
+ u16 rx_mask[8]; /* Active Receive channels LSB is ch0 */
+ u16 tx_mask[8]; /* Active Transmit channels LSB is ch0 */
+ /* Only channels less than the number of FRAME_SIZE are implemented */
+ struct tdm_cfg cfg_ctrl; /* Signaling controls configuration */
+ u8 *tdm_input_data; /* buffer used for Rx by the tdm */
+ u8 *tdm_output_data; /* buffer used for Tx by the tdm */
+
+ dma_addr_t dma_input_addr; /* dma mapped buffer for TDM Rx */
+ dma_addr_t dma_output_addr; /* dma mapped buffer for TDM Tx */
+ u16 physical_num_ts; /* physical number of timeslots in the tdm
+ frame */
+ u32 phase_rx; /* cycles through 0, 1, 2 */
+ u32 phase_tx; /* cycles through 0, 1, 2 */
+ /*
+ * the following two variables are for dealing with "stutter" problem
+ * "stutter" period is about 20 frames or so, varies depending active
+ * channel num depending on the sample depth, the code should let a
+ * few Rx interrupts go by
+ */
+ u32 tdm_icnt;
+ u32 tdm_flag;
+ struct ucc_transparent_pram __iomem *ucc_pram;
+ struct qe_bd __iomem *tx_bd;
+ struct qe_bd __iomem *rx_bd;
+ u32 ucc_pram_offset;
+ u32 tx_bd_offset;
+ u32 rx_bd_offset;
+ u32 rx_ucode_buf_offset;
+ u32 tx_ucode_buf_offset;
+ bool leg_slic;
+ wait_queue_head_t wakeup_event;
+};
+
+struct tdm_client {
+ u32 client_id;
+ void (*tdm_read)(u32 client_id, short chn_id,
+ short *pcm_buffer, short len);
+ void (*tdm_write)(u32 client_id, short chn_id,
+ short *pcm_buffer, short len);
+ wait_queue_head_t *wakeup_event;
+ };
+
+#define MAX_PHASE 1
+#define NR_BUFS 2
+#define EFF_ACTIVE_CH ACTIVE_CH / 2
+
+#endif
--- /dev/null
+++ b/drivers/misc/ucc_tdm.c
@@ -0,0 +1,1017 @@
+/*
+ * drivers/misc/ucc_tdm.c
+ *
+ * UCC Based Linux TDM Driver
+ * This driver is designed to support UCC based TDM for PowerPC processors.
+ * This driver can interface with SLIC device to run VOIP kind of
+ * applications.
+ *
+ * Author: Ashish Kalra & Poonam Aggrwal
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <generated/autoconf.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/time.h>
+#include <linux/skbuff.h>
+#include <linux/proc_fs.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/string.h>
+#include <linux/irq.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+#include <linux/wait.h>
+#include <linux/timer.h>
+
+#include <asm/immap_qe.h>
+#include <asm/qe.h>
+#include <asm/ucc.h>
+#include <asm/ucc_fast.h>
+#include <asm/ucc_slow.h>
+
+#include "ucc_tdm.h"
+#define DRV_DESC "Freescale QE UCC TDM Driver"
+#define DRV_NAME "ucc_tdm"
+
+
+/*
+ * define the following #define if snooping or hardware-based cache coherency
+ * is disabled on the UCC transparent controller.This flag enables
+ * software-based cache-coherency support by explicitly flushing data cache
+ * contents after setting up the TDM output buffer(s) and invalidating the
+ * data cache contents before the TDM input buffer(s) are read.
+ */
+#undef UCC_CACHE_SNOOPING_DISABLED
+
+#define MAX_NUM_TDM_DEVICES 8
+
+static struct tdm_ctrl *tdm_ctrl[MAX_NUM_TDM_DEVICES];
+
+static int num_tdm_devices;
+static int num_tdm_clients;
+
+static struct ucc_tdm_info utdm_primary_info = {
+ .uf_info = {
+ .tsa = 1,
+ .cdp = 1,
+ .cds = 1,
+ .ctsp = 1,
+ .ctss = 1,
+ .revd = 1,
+ .urfs = 0x128,
+ .utfs = 0x128,
+ .utfet = 0,
+ .utftt = 0x128,
+ .ufpt = 256,
+ .ttx_trx = UCC_FAST_GUMR_TRANSPARENT_TTX_TRX_TRANSPARENT,
+ .tenc = UCC_FAST_TX_ENCODING_NRZ,
+ .renc = UCC_FAST_RX_ENCODING_NRZ,
+ .tcrc = UCC_FAST_16_BIT_CRC,
+ .synl = UCC_FAST_SYNC_LEN_NOT_USED,
+ },
+ .ucc_busy = 0,
+};
+
+static struct ucc_tdm_info utdm_info[8];
+
+static void dump_siram(struct tdm_ctrl *tdm_c)
+{
+#ifdef DEBUG
+ int i;
+ u16 phy_num_ts;
+
+ phy_num_ts = tdm_c->physical_num_ts;
+
+ pr_debug("SI TxRAM dump\n");
+ /* each slot entry in SI RAM is of 2 bytes */
+ for (i = 0; i < phy_num_ts * 2; i++)
+ pr_debug("%x ", in_8(&qe_immr->sir.tx[i]));
+ pr_debug("\nSI RxRAM dump\n");
+ for (i = 0; i < phy_num_ts * 2; i++)
+ pr_debug("%x ", in_8(&qe_immr->sir.rx[i]));
+ pr_debug("\n");
+#endif
+}
+
+static void dump_ucc(struct tdm_ctrl *tdm_c)
+{
+#ifdef DEBUG
+ struct ucc_transparent_pram *ucc_pram;
+
+ ucc_pram = tdm_c->ucc_pram;
+
+ pr_debug("%s Dumping UCC Registers\n", __FUNCTION__);
+ ucc_fast_dump_regs(tdm_c->uf_private);
+ pr_debug("%s Dumping UCC Parameter RAM\n", __FUNCTION__);
+ pr_debug("rbase = 0x%x\n", in_be32(&ucc_pram->rbase));
+ pr_debug("rbptr = 0x%x\n", in_be32(&ucc_pram->rbptr));
+ pr_debug("mrblr = 0x%x\n", in_be16(&ucc_pram->mrblr));
+ pr_debug("rbdlen = 0x%x\n", in_be16(&ucc_pram->rbdlen));
+ pr_debug("rbdstat = 0x%x\n", in_be16(&ucc_pram->rbdstat));
+ pr_debug("rstate = 0x%x\n", in_be32(&ucc_pram->rstate));
+ pr_debug("rdptr = 0x%x\n", in_be32(&ucc_pram->rdptr));
+ pr_debug("tbase = 0x%x\n", in_be32(&ucc_pram->tbase));
+ pr_debug("tbptr = 0x%x\n", in_be32(&ucc_pram->tbptr));
+ pr_debug("tbdlen = 0x%x\n", in_be16(&ucc_pram->tbdlen));
+ pr_debug("tbdstat = 0x%x\n", in_be16(&ucc_pram->tbdstat));
+ pr_debug("tstate = 0x%x\n", in_be32(&ucc_pram->tstate));
+ pr_debug("tdptr = 0x%x\n", in_be32(&ucc_pram->tdptr));
+#endif
+}
+
+/*
+ * For use when a framing bit is not present
+ * Program current-route SI ram
+ * Set SIxRAM TDMx
+ * Entries must be in units of 8.
+ * SIR_UCC -> Channel Select
+ * SIR_CNT -> Number of bits or bytes
+ * SIR_BYTE -> Byte or Bit resolution
+ * SIR_LAST -> Indicates last entry in SIxRAM
+ * SIR_IDLE -> The Tx data pin is Tri-stated and the Rx data pin is
+ * ignored
+ */
+static void set_siram(struct tdm_ctrl *tdm_c, enum comm_dir dir)
+{
+ const u16 *mask;
+ u16 temp_mask = 1;
+ u16 siram_code = 0;
+ u32 i, j, k;
+ u32 ucc;
+ u32 phy_num_ts;
+
+ phy_num_ts = tdm_c->physical_num_ts;
+ ucc = tdm_c->ut_info->uf_info.ucc_num;
+
+ if (dir == COMM_DIR_RX)
+ mask = tdm_c->rx_mask;
+ else
+ mask = tdm_c->tx_mask;
+ k = 0;
+ j = 0;
+ for (i = 0; i < phy_num_ts; i++) {
+ if ((mask[k] & temp_mask) == temp_mask)
+ siram_code = SIR_UCC(ucc) | SIR_CNT(0) | SIR_BYTE;
+ else
+ siram_code = SIR_IDLE | SIR_CNT(0) | SIR_BYTE;
+ if (dir == COMM_DIR_RX)
+ out_be16((u16 *)&qe_immr->sir.rx[i * 2], siram_code);
+ else
+ out_be16((u16 *)&qe_immr->sir.tx[i * 2], siram_code);
+ temp_mask = temp_mask << 1;
+ j++;
+ if (j >= 16) {
+ j = 0;
+ temp_mask = 0x0001;
+ k++;
+ }
+ }
+ siram_code = siram_code | SIR_LAST;
+
+ if (dir == COMM_DIR_RX)
+ out_be16((u16 *)&qe_immr->sir.rx[(phy_num_ts - 1) * 2],
+ siram_code);
+ else
+ out_be16((u16 *)&qe_immr->sir.tx[(phy_num_ts - 1) * 2],
+ siram_code);
+}
+
+static void config_si(struct tdm_ctrl *tdm_c)
+{
+ u8 rxsyncdelay, txsyncdelay, tdm_port;
+ u16 sixmr_val = 0;
+ u32 tdma_mode_off;
+ u16 *si1_tdm_mode_reg;
+
+ tdm_port = tdm_c->tdm_port;
+
+ set_siram(tdm_c, COMM_DIR_RX);
+
+ set_siram(tdm_c, COMM_DIR_TX);
+
+ rxsyncdelay = tdm_c->cfg_ctrl.rx_fr_sync_delay;
+ txsyncdelay = tdm_c->cfg_ctrl.tx_fr_sync_delay;
+ if (tdm_c->cfg_ctrl.com_pin)
+ sixmr_val |= SIMODE_CRT;
+ if (tdm_c->cfg_ctrl.fr_sync_level == 1)
+ sixmr_val |= SIMODE_SL;
+ if (tdm_c->cfg_ctrl.clk_edge == 1)
+ sixmr_val |= SIMODE_CE;
+ if (tdm_c->cfg_ctrl.fr_sync_edge == 1)
+ sixmr_val |= SIMODE_FE;
+ sixmr_val |= (SIMODE_TFSD(txsyncdelay) | SIMODE_RFSD(rxsyncdelay));
+
+ tdma_mode_off = SI_TDM_MODE_REGISTER_OFFSET * tdm_c->tdm_port;
+
+ si1_tdm_mode_reg = (u8 *)&qe_immr->si1 + tdma_mode_off;
+ out_be16(si1_tdm_mode_reg, sixmr_val);
+
+ dump_siram(tdm_c);
+}
+
+static int tdm_init(struct tdm_ctrl *tdm_c)
+{
+ u32 tdm_port, ucc, act_num_ts;
+ int ret, i, err;
+ u32 cecr_subblock;
+ u32 pram_offset;
+ u32 rxbdt_offset;
+ u32 txbdt_offset;
+ u32 rx_ucode_buf_offset, tx_ucode_buf_offset;
+ u16 bd_status, bd_len;
+ enum qe_clock clock;
+ struct qe_bd __iomem *rx_bd, *tx_bd;
+
+ tdm_port = tdm_c->tdm_port;
+ ucc = tdm_c->ut_info->uf_info.ucc_num;
+ act_num_ts = tdm_c->cfg_ctrl.active_num_ts;
+
+ /*
+ * TDM Tx and Rx CLKs = 2048 KHz.
+ */
+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_clk, "BRG")) {
+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_clk);
+ err = qe_setbrg(clock, 2048000, 1);
+ if (err < 0) {
+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
+ tdm_c->ut_info->uf_info.tdm_tx_clk);
+ return err;
+ }
+ }
+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_clk, "BRG")) {
+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_clk);
+ err = qe_setbrg(clock, 2048000, 1);
+ if (err < 0) {
+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
+ tdm_c->ut_info->uf_info.tdm_rx_clk);
+ return err;
+ }
+ }
+ /*
+ * TDM FSyncs = 4 KHz.
+ */
+ if (strstr(tdm_c->ut_info->uf_info.tdm_tx_sync, "BRG")) {
+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_tx_sync);
+ err = qe_setbrg(clock, 4000, 1);
+ if (err < 0) {
+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
+ tdm_c->ut_info->uf_info.tdm_tx_sync);
+ return err;
+ }
+ }
+ if (strstr(tdm_c->ut_info->uf_info.tdm_rx_sync, "BRG")) {
+ clock = qe_clock_source(tdm_c->ut_info->uf_info.tdm_rx_sync);
+ err = qe_setbrg(clock, 4000, 1);
+ if (err < 0) {
+ printk(KERN_ERR "%s: Failed to set %s\n", __FUNCTION__,
+ tdm_c->ut_info->uf_info.tdm_rx_sync);
+ return err;
+ }
+ }
+
+ tdm_c->ut_info->uf_info.uccm_mask = (u32)
+ ((UCC_TRANS_UCCE_RXB | UCC_TRANS_UCCE_BSY) << 16);
+
+ if (ucc_fast_init(&(tdm_c->ut_info->uf_info), &tdm_c->uf_private)) {
+ printk(KERN_ERR "%s: Failed to init uccf\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
+
+ /* Write to QE CECR, UCCx channel to Stop Transmission */
+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
+ qe_issue_cmd(QE_STOP_TX, cecr_subblock,
+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ pram_offset = qe_muram_alloc(UCC_TRANSPARENT_PRAM_SIZE,
+ ALIGNMENT_OF_UCC_SLOW_PRAM);
+ if (IS_ERR_VALUE(pram_offset)) {
+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for"
+ " transparent UCC\n", __FUNCTION__);
+ ret = -ENOMEM;
+ goto pram_alloc_error;
+ }
+
+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
+ qe_issue_cmd(QE_ASSIGN_PAGE_TO_DEVICE, cecr_subblock,
+ QE_CR_PROTOCOL_UNSPECIFIED, pram_offset);
+
+ tdm_c->ucc_pram = qe_muram_addr(pram_offset);
+ tdm_c->ucc_pram_offset = pram_offset;
+
+ /*
+ * zero-out pram, this will also ensure RSTATE, TSTATE are cleared, also
+ * DISFC & CRCEC counters will be initialized.
+ */
+ memset(tdm_c->ucc_pram, 0, sizeof(struct ucc_transparent_pram));
+
+ /* rbase, tbase alignment is 8. */
+ rxbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_ERR_VALUE(rxbdt_offset)) {
+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for RxBDs\n",
+ __FUNCTION__);
+ ret = -ENOMEM;
+ goto rxbd_alloc_error;
+ }
+ txbdt_offset = qe_muram_alloc(NR_BUFS * sizeof(struct qe_bd),
+ QE_ALIGNMENT_OF_BD);
+ if (IS_ERR_VALUE(txbdt_offset)) {
+ printk(KERN_ERR "%s: Cannot allocate MURAM memory for TxBDs\n",
+ __FUNCTION__);
+ ret = -ENOMEM;
+ goto txbd_alloc_error;
+ }
+ tdm_c->tx_bd = qe_muram_addr(txbdt_offset);
+ tdm_c->rx_bd = qe_muram_addr(rxbdt_offset);
+
+ tdm_c->tx_bd_offset = txbdt_offset;
+ tdm_c->rx_bd_offset = rxbdt_offset;
+
+ rx_bd = tdm_c->rx_bd;
+ tx_bd = tdm_c->tx_bd;
+
+ out_be32(&tdm_c->ucc_pram->rbase, (u32) immrbar_virt_to_phys(rx_bd));
+ out_be32(&tdm_c->ucc_pram->tbase, (u32) immrbar_virt_to_phys(tx_bd));
+
+ for (i = 0; i < NR_BUFS - 1; i++) {
+ bd_status = (u16) ((R_E | R_CM | R_I) >> 16);
+ bd_len = 0;
+ out_be16(&rx_bd->length, bd_len);
+ out_be16(&rx_bd->status, bd_status);
+ out_be32(&rx_bd->buf,
+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
+ rx_bd += 1;
+
+ bd_status = (u16) ((T_R | T_CM) >> 16);
+ bd_len = SAMPLE_DEPTH * act_num_ts;
+ out_be16(&tx_bd->length, bd_len);
+ out_be16(&tx_bd->status, bd_status);
+ out_be32(&tx_bd->buf,
+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
+ tx_bd += 1;
+ }
+
+ bd_status = (u16) ((R_E | R_CM | R_I | R_W) >> 16);
+ bd_len = 0;
+ out_be16(&rx_bd->length, bd_len);
+ out_be16(&rx_bd->status, bd_status);
+ out_be32(&rx_bd->buf,
+ tdm_c->dma_input_addr + i * SAMPLE_DEPTH * act_num_ts);
+
+ bd_status = (u16) ((T_R | T_CM | T_W) >> 16);
+ bd_len = SAMPLE_DEPTH * act_num_ts;
+ out_be16(&tx_bd->length, bd_len);
+ out_be16(&tx_bd->status, bd_status);
+ out_be32(&tx_bd->buf,
+ tdm_c->dma_output_addr + i * SAMPLE_DEPTH * act_num_ts);
+
+ config_si(tdm_c);
+
+ setbits32(&qe_immr->ic.qimr, (0x80000000UL >> ucc));
+
+ rx_ucode_buf_offset = qe_muram_alloc(32, 32);
+ if (IS_ERR_VALUE(rx_ucode_buf_offset)) {
+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Rx"
+ " ucode buf\n", __FUNCTION__);
+ ret = -ENOMEM;
+ goto rxucode_buf_alloc_error;
+ }
+
+ tx_ucode_buf_offset = qe_muram_alloc(32, 32);
+ if (IS_ERR_VALUE(tx_ucode_buf_offset)) {
+ printk(KERN_ERR "%s: Cannot allocate MURAM mem for Tx"
+ " ucode buf\n", __FUNCTION__);
+ ret = -ENOMEM;
+ goto txucode_buf_alloc_error;
+ }
+ out_be16(&tdm_c->ucc_pram->riptr, (u16) rx_ucode_buf_offset);
+ out_be16(&tdm_c->ucc_pram->tiptr, (u16) tx_ucode_buf_offset);
+
+ tdm_c->rx_ucode_buf_offset = rx_ucode_buf_offset;
+ tdm_c->tx_ucode_buf_offset = tx_ucode_buf_offset;
+
+ /*
+ * set the receive buffer descriptor maximum size to be
+ * SAMPLE_DEPTH * number of active RX channels
+ */
+ out_be16(&tdm_c->ucc_pram->mrblr, (u16) SAMPLE_DEPTH * act_num_ts);
+
+ /*
+ * enable snooping and BE byte ordering on the UCC pram's
+ * tstate & rstate registers.
+ */
+ out_be32(&tdm_c->ucc_pram->tstate, 0x30000000UL);
+ out_be32(&tdm_c->ucc_pram->rstate, 0x30000000UL);
+
+ /*Put UCC transparent controller into serial interface mode. */
+ out_be32(&tdm_c->uf_regs->upsmr, 0);
+
+ /* Reset TX and RX for UCCx */
+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
+ qe_issue_cmd(QE_INIT_TX_RX, cecr_subblock,
+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ return 0;
+
+txucode_buf_alloc_error:
+ qe_muram_free(rx_ucode_buf_offset);
+rxucode_buf_alloc_error:
+ qe_muram_free(txbdt_offset);
+txbd_alloc_error:
+ qe_muram_free(rxbdt_offset);
+rxbd_alloc_error:
+ qe_muram_free(pram_offset);
+pram_alloc_error:
+ ucc_fast_free(tdm_c->uf_private);
+ return ret;
+}
+
+static void tdm_deinit(struct tdm_ctrl *tdm_c)
+{
+ qe_muram_free(tdm_c->rx_ucode_buf_offset);
+ qe_muram_free(tdm_c->tx_ucode_buf_offset);
+
+ if (tdm_c->rx_bd_offset) {
+ qe_muram_free(tdm_c->rx_bd_offset);
+ tdm_c->rx_bd = NULL;
+ tdm_c->rx_bd_offset = 0;
+ }
+ if (tdm_c->tx_bd_offset) {
+ qe_muram_free(tdm_c->tx_bd_offset);
+ tdm_c->tx_bd = NULL;
+ tdm_c->tx_bd_offset = 0;
+ }
+ if (tdm_c->ucc_pram_offset) {
+ qe_muram_free(tdm_c->ucc_pram_offset);
+ tdm_c->ucc_pram = NULL;
+ tdm_c->ucc_pram_offset = 0;
+ }
+}
+
+
+static irqreturn_t tdm_isr(int irq, void *dev_id)
+{
+ u8 *input_tdm_buffer, *output_tdm_buffer;
+ u32 txb, rxb;
+ u32 ucc;
+ register u32 ucce = 0;
+ struct tdm_ctrl *tdm_c;
+ tdm_c = (struct tdm_ctrl *)dev_id;
+
+ tdm_c->tdm_icnt++;
+ ucc = tdm_c->ut_info->uf_info.ucc_num;
+ input_tdm_buffer = tdm_c->tdm_input_data;
+ output_tdm_buffer = tdm_c->tdm_output_data;
+
+ if (in_be32(tdm_c->uf_private->p_ucce) &
+ (UCC_TRANS_UCCE_BSY << 16)) {
+ out_be32(tdm_c->uf_private->p_ucce,
+ (UCC_TRANS_UCCE_BSY << 16));
+ pr_info("%s: From tdm isr busy interrupt\n",
+ __FUNCTION__);
+ dump_ucc(tdm_c);
+
+ return IRQ_HANDLED;
+ }
+
+ if (tdm_c->tdm_flag == 1) {
+ /* track phases for Rx/Tx */
+ tdm_c->phase_rx += 1;
+ if (tdm_c->phase_rx == MAX_PHASE)
+ tdm_c->phase_rx = 0;
+
+ tdm_c->phase_tx += 1;
+ if (tdm_c->phase_tx == MAX_PHASE)
+ tdm_c->phase_tx = 0;
+
+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
+ {
+ u32 temp_rx, temp_tx, phase_tx, phase_rx;
+ int i;
+ phase_rx = tdm_c->phase_rx;
+ phase_tx = tdm_c->phase_tx;
+ if (phase_rx == 0)
+ phase_rx = MAX_PHASE;
+ else
+ phase_rx -= 1;
+ if (phase_tx == 0)
+ phase_tx = MAX_PHASE;
+ else
+ phase_tx -= 1;
+ temp_rx = phase_rx * SAMPLE_DEPTH * ACTIVE_CH;
+ temp_tx = phase_tx * SAMPLE_DEPTH * ACTIVE_CH;
+
+ /*check if loopback received data on TS0 is correct. */
+ pr_debug("%s: check if loopback received data on TS0"
+ " is correct\n", __FUNCTION__);
+ pr_debug("%d,%d ", phase_rx, phase_tx);
+ for (i = 0; i < 8; i++)
+ pr_debug("%1d,%1d ",
+ input_tdm_buffer[temp_rx + i],
+ output_tdm_buffer[temp_tx + i]);
+ pr_debug("\n");
+ }
+#endif
+
+ /* schedule BH */
+ wake_up_interruptible(&tdm_c->wakeup_event);
+ } else {
+ if (tdm_c->tdm_icnt == STUTTER_INT_CNT) {
+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
+ in_be32(&tdm_c->ucc_pram->tbase);
+ rxb = in_be32(&tdm_c->ucc_pram->rbptr) -
+ in_be32(&tdm_c->ucc_pram->rbase);
+ tdm_c->phase_tx = txb / sizeof(struct qe_bd);
+ tdm_c->phase_rx = rxb / sizeof(struct qe_bd);
+
+#ifdef CONFIG_TDM_HW_LB_TSA_SLIC
+ tdm_c->phase_tx = tdm_c->phase_rx;
+#endif
+
+ /* signal "stuttering" period is over */
+ tdm_c->tdm_flag = 1;
+
+ pr_debug("%s: stuttering period is over\n",
+ __FUNCTION__);
+
+ if (in_be32(tdm_c->uf_private->p_ucce) &
+ (UCC_TRANS_UCCE_TXE << 16)) {
+ u32 cecr_subblock;
+ out_be32(tdm_c->uf_private->p_ucce,
+ (UCC_TRANS_UCCE_TXE << 16));
+ pr_debug("%s: From tdm isr txe interrupt\n",
+ __FUNCTION__);
+
+ cecr_subblock =
+ ucc_fast_get_qe_cr_subblock(ucc);
+ qe_issue_cmd(QE_RESTART_TX, cecr_subblock,
+ (u8) QE_CR_PROTOCOL_UNSPECIFIED,
+ 0);
+ }
+ }
+ }
+
+ ucce = (in_be32(tdm_c->uf_private->p_ucce)
+ & in_be32(tdm_c->uf_private->p_uccm));
+
+ out_be32(tdm_c->uf_private->p_ucce, ucce);
+
+ return IRQ_HANDLED;
+}
+
+static int tdm_start(struct tdm_ctrl *tdm_c)
+{
+ if (request_irq(tdm_c->ut_info->uf_info.irq, tdm_isr,
+ 0, "tdm", tdm_c)) {
+ printk(KERN_ERR "%s: request_irq for tdm_isr failed\n",
+ __FUNCTION__);
+ return -ENODEV;
+ }
+
+ ucc_fast_enable(tdm_c->uf_private, COMM_DIR_RX | COMM_DIR_TX);
+
+ pr_info("%s 16-bit linear pcm mode active with"
+ " slots 0 & 2\n", __FUNCTION__);
+
+ dump_siram(tdm_c);
+ dump_ucc(tdm_c);
+
+ setbits8(&(qe_immr->si1.siglmr1_h), (0x1 << tdm_c->tdm_port));
+ pr_info("%s UCC based TDM enabled\n", __FUNCTION__);
+
+ return 0;
+}
+
+static void tdm_stop(struct tdm_ctrl *tdm_c)
+{
+ u32 port, si;
+ u32 ucc;
+ u32 cecr_subblock;
+
+ port = tdm_c->tdm_port;
+ si = tdm_c->si;
+ ucc = tdm_c->ut_info->uf_info.ucc_num;
+ cecr_subblock = ucc_fast_get_qe_cr_subblock(ucc);
+
+ qe_issue_cmd(QE_GRACEFUL_STOP_TX, cecr_subblock,
+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+ qe_issue_cmd(QE_CLOSE_RX_BD, cecr_subblock,
+ (u8) QE_CR_PROTOCOL_UNSPECIFIED, 0);
+
+ clrbits8(&qe_immr->si1.siglmr1_h, (0x1 << port));
+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_RX);
+ ucc_fast_disable(tdm_c->uf_private, COMM_DIR_TX);
+ free_irq(tdm_c->ut_info->uf_info.irq, tdm_c);
+}
+
+
+static void config_tdm(struct tdm_ctrl *tdm_c)
+{
+ u32 i, j, k;
+
+ j = 0;
+ k = 0;
+
+ /* Set Mask Bits */
+ for (i = 0; i < ACTIVE_CH; i++) {
+ tdm_c->tx_mask[k] |= (1 << j);
+ tdm_c->rx_mask[k] |= (1 << j);
+ j++;
+ if (j >= 16) {
+ j = 0;
+ k++;
+ }
+ }
+ /* physical number of slots in a frame */
+ tdm_c->physical_num_ts = NUM_TS;
+
+ /* common receive and transmit pins */
+ tdm_c->cfg_ctrl.com_pin = 1;
+
+ /* L1R/TSYNC active logic "1" */
+ tdm_c->cfg_ctrl.fr_sync_level = 0;
+
+ /*
+ * TX data on rising edge of clock
+ * RX data on falling edge
+ */
+ tdm_c->cfg_ctrl.clk_edge = 0;
+
+ /* Frame sync sampled on falling edge */
+ tdm_c->cfg_ctrl.fr_sync_edge = 0;
+
+ /* no bit delay */
+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 0;
+
+ /* no bit delay */
+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 0;
+
+#ifndef CONFIG_TDM_HW_LB_TSA_SLIC
+ if (tdm_c->leg_slic) {
+ /* Need 1 bit delay for Legrity SLIC */
+ tdm_c->cfg_ctrl.rx_fr_sync_delay = 1;
+ tdm_c->cfg_ctrl.tx_fr_sync_delay = 1;
+ pr_info("%s Delay for Legerity!\n", __FUNCTION__);
+ }
+#endif
+
+ tdm_c->cfg_ctrl.active_num_ts = ACTIVE_CH;
+}
+
+static void tdm_read(u32 client_id, short chn_id, short *pcm_buffer,
+ short len)
+{
+ int i;
+ u32 phase_rx;
+ /* point to where to start for the current phase data processing */
+ u32 temp_rx;
+
+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
+
+ u16 *input_tdm_buffer =
+ (u16 *)tdm_c->tdm_input_data;
+
+ phase_rx = tdm_c->phase_rx;
+ if (phase_rx == 0)
+ phase_rx = MAX_PHASE;
+ else
+ phase_rx -= 1;
+
+ temp_rx = phase_rx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
+
+#ifdef UCC_CACHE_SNOOPING_DISABLED
+ flush_dcache_range((size_t) &input_tdm_buffer[temp_rx],
+ (size_t) &input_tdm_buffer[temp_rx +
+ SAMPLE_DEPTH * ACTIVE_CH]);
+#endif
+ for (i = 0; i < len; i++)
+ pcm_buffer[i] =
+ input_tdm_buffer[i * EFF_ACTIVE_CH + temp_rx + chn_id];
+
+}
+
+static void tdm_write(u32 client_id, short chn_id, short *pcm_buffer,
+ short len)
+{
+ int i;
+ int phase_tx;
+ u32 txb;
+ /* point to where to start for the current phase data processing */
+ int temp_tx;
+ struct tdm_ctrl *tdm_c = tdm_ctrl[client_id];
+
+ u16 *output_tdm_buffer;
+ output_tdm_buffer = (u16 *)tdm_c->tdm_output_data;
+ txb = in_be32(&tdm_c->ucc_pram->tbptr) -
+ in_be32(&tdm_c->ucc_pram->tbase);
+ phase_tx = txb / sizeof(struct qe_bd);
+
+ if (phase_tx == 0)
+ phase_tx = MAX_PHASE;
+ else
+ phase_tx -= 1;
+
+ temp_tx = phase_tx * SAMPLE_DEPTH * EFF_ACTIVE_CH;
+
+ for (i = 0; i < len; i++)
+ output_tdm_buffer[i * EFF_ACTIVE_CH + temp_tx + chn_id] =
+ pcm_buffer[i];
+
+#ifdef UCC_CACHE_SNOOPING_DISABLED
+ flush_dcache_range((size_t) &output_tdm_buffer[temp_tx],
+ (size_t) &output_tdm_buffer[temp_tx + SAMPLE_DEPTH *
+ ACTIVE_CH]);
+#endif
+}
+
+
+static int tdm_register_client(struct tdm_client *tdm_client)
+{
+ u32 i;
+ if (num_tdm_clients == num_tdm_devices) {
+ printk(KERN_ERR "all TDM devices busy\n");
+ return -EBUSY;
+ }
+
+ for (i = 0; i < num_tdm_devices; i++) {
+ if (!tdm_ctrl[i]->device_busy) {
+ tdm_ctrl[i]->device_busy = 1;
+ break;
+ }
+ }
+ num_tdm_clients++;
+ tdm_client->client_id = i;
+ tdm_client->tdm_read = tdm_read;
+ tdm_client->tdm_write = tdm_write;
+ tdm_client->wakeup_event =
+ &(tdm_ctrl[i]->wakeup_event);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(tdm_register_client);
+
+static int tdm_deregister_client(struct tdm_client *tdm_client)
+{
+ num_tdm_clients--;
+ tdm_ctrl[tdm_client->client_id]->device_busy = 0;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(tdm_deregister_client);
+
+static int ucc_tdm_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ struct device_node *np = ofdev->node;
+ struct resource res;
+ const unsigned int *prop;
+ u32 ucc_num, device_num, err, ret = 0;
+ struct device_node *np_tmp;
+ dma_addr_t physaddr;
+ void *tdm_buff;
+ struct ucc_tdm_info *ut_info;
+
+ prop = of_get_property(np, "device-id", NULL);
+ if (prop == NULL) {
+ printk(KERN_ERR "ucc_tdm: device-id missing\n");
+ return -ENODEV;
+ }
+
+ ucc_num = *prop - 1;
+ if ((ucc_num < 0) || (ucc_num > 7))
+ return -ENODEV;
+
+ ut_info = &utdm_info[ucc_num];
+ if (ut_info->ucc_busy) {
+ printk(KERN_ERR "ucc_tdm: UCC in use by another TDM driver"
+ "instance\n");
+ return -EBUSY;
+ }
+ if (num_tdm_devices == MAX_NUM_TDM_DEVICES) {
+ printk(KERN_ERR "ucc_tdm: All TDM devices already"
+ " initialized\n");
+ return -ENODEV;
+ }
+
+ ut_info->ucc_busy = 1;
+ tdm_ctrl[num_tdm_devices++] =
+ kzalloc(sizeof(struct tdm_ctrl), GFP_KERNEL);
+ if (!tdm_ctrl[num_tdm_devices - 1]) {
+ printk(KERN_ERR "ucc_tdm: no memory to allocate for"
+ " tdm control structure\n");
+ num_tdm_devices--;
+ return -ENOMEM;
+ }
+ device_num = num_tdm_devices - 1;
+
+ tdm_ctrl[device_num]->device = &ofdev->dev;
+ tdm_ctrl[device_num]->ut_info = ut_info;
+
+ tdm_ctrl[device_num]->ut_info->uf_info.ucc_num = ucc_num;
+
+ prop = of_get_property(np, "fsl,tdm-num", NULL);
+ if (prop == NULL) {
+ ret = -EINVAL;
+ goto get_property_error;
+ }
+
+ tdm_ctrl[device_num]->tdm_port = *prop - 1;
+
+ if (tdm_ctrl[device_num]->tdm_port > 3) {
+ ret = -EINVAL;
+ goto get_property_error;
+ }
+
+ prop = of_get_property(np, "fsl,si-num", NULL);
+ if (prop == NULL) {
+ ret = -EINVAL;
+ goto get_property_error;
+ }
+
+ tdm_ctrl[device_num]->si = *prop - 1;
+
+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk =
+ of_get_property(np, "fsl,tdm-tx-clk", NULL);
+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_clk == NULL) {
+ ret = -EINVAL;
+ goto get_property_error;
+ }
+
+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk =
+ of_get_property(np, "fsl,tdm-rx-clk", NULL);
+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_clk == NULL) {
+ ret = -EINVAL;
+ goto get_property_error;
+ }
+
+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync =
+ of_get_property(np, "fsl,tdm-tx-sync", NULL);
+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_tx_sync == NULL) {
+ ret = -EINVAL;
+ goto get_property_error;
+ }
+
+ tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync =
+ of_get_property(np, "fsl,tdm-rx-sync", NULL);
+ if (tdm_ctrl[device_num]->ut_info->uf_info.tdm_rx_sync == NULL) {
+ ret = -EINVAL;
+ goto get_property_error;
+ }
+
+ tdm_ctrl[device_num]->ut_info->uf_info.irq =
+ irq_of_parse_and_map(np, 0);
+ err = of_address_to_resource(np, 0, &res);
+ if (err) {
+ ret = -EINVAL;
+ goto get_property_error;
+ }
+ tdm_ctrl[device_num]->ut_info->uf_info.regs = res.start;
+ tdm_ctrl[device_num]->uf_regs = of_iomap(np, 0);
+
+ np_tmp = NULL;
+ np_tmp = of_find_compatible_node(np_tmp, "slic", "legerity-slic");
+ if (np_tmp != NULL) {
+ tdm_ctrl[device_num]->leg_slic = 1;
+ of_node_put(np_tmp);
+ } else
+ tdm_ctrl[device_num]->leg_slic = 0;
+
+ config_tdm(tdm_ctrl[device_num]);
+
+ tdm_buff = dma_alloc_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
+ &physaddr, GFP_KERNEL);
+ if (!tdm_buff) {
+ printk(KERN_ERR "ucc-tdm: could not allocate buffer"
+ "descriptors\n");
+ ret = -ENOMEM;
+ goto alloc_error;
+ }
+
+ tdm_ctrl[device_num]->tdm_input_data = tdm_buff;
+ tdm_ctrl[device_num]->dma_input_addr = physaddr;
+
+ tdm_ctrl[device_num]->tdm_output_data = tdm_buff + NR_BUFS *
+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
+ tdm_ctrl[device_num]->dma_output_addr = physaddr + NR_BUFS *
+ SAMPLE_DEPTH * tdm_ctrl[device_num]->cfg_ctrl.active_num_ts;
+
+ init_waitqueue_head(&(tdm_ctrl[device_num]->wakeup_event));
+
+ ret = tdm_init(tdm_ctrl[device_num]);
+ if (ret != 0)
+ goto tdm_init_error;
+
+ ret = tdm_start(tdm_ctrl[device_num]);
+ if (ret != 0)
+ goto tdm_start_error;
+
+ dev_set_drvdata(&(ofdev->dev), tdm_ctrl[device_num]);
+
+ pr_info("%s UCC based tdm module installed\n", __FUNCTION__);
+ return 0;
+
+tdm_start_error:
+ tdm_deinit(tdm_ctrl[device_num]);
+tdm_init_error:
+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
+ tdm_ctrl[device_num]->cfg_ctrl.active_num_ts,
+ tdm_ctrl[device_num]->tdm_input_data,
+ tdm_ctrl[device_num]->dma_input_addr);
+
+alloc_error:
+ irq_dispose_mapping(tdm_ctrl[device_num]->ut_info->uf_info.irq);
+ iounmap(tdm_ctrl[device_num]->uf_regs);
+
+get_property_error:
+ num_tdm_devices--;
+ kfree(tdm_ctrl[device_num]);
+ ut_info->ucc_busy = 0;
+ return ret;
+}
+
+static int ucc_tdm_remove(struct of_device *ofdev)
+{
+ struct tdm_ctrl *tdm_c;
+ struct ucc_tdm_info *ut_info;
+ u32 ucc_num;
+
+ tdm_c = dev_get_drvdata(&(ofdev->dev));
+ dev_set_drvdata(&(ofdev->dev), NULL);
+ ucc_num = tdm_c->ut_info->uf_info.ucc_num;
+ ut_info = &utdm_info[ucc_num];
+ tdm_stop(tdm_c);
+ tdm_deinit(tdm_c);
+
+ ucc_fast_free(tdm_c->uf_private);
+
+ dma_free_coherent(NULL, 2 * NR_BUFS * SAMPLE_DEPTH *
+ tdm_c->cfg_ctrl.active_num_ts,
+ tdm_c->tdm_input_data,
+ tdm_c->dma_input_addr);
+
+ irq_dispose_mapping(tdm_c->ut_info->uf_info.irq);
+ iounmap(tdm_c->uf_regs);
+
+ num_tdm_devices--;
+ kfree(tdm_c);
+
+ ut_info->ucc_busy = 0;
+
+ pr_info("%s UCC based tdm module uninstalled\n", __FUNCTION__);
+ return 0;
+}
+
+const struct of_device_id ucc_tdm_match[] = {
+ { .type = "tdm", .compatible = "fsl,ucc-tdm", },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, ucc_tdm_match);
+
+static struct of_platform_driver ucc_tdm_driver = {
+ .name = DRV_NAME,
+ .match_table = ucc_tdm_match,
+ .probe = ucc_tdm_probe,
+ .remove = ucc_tdm_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ucc_tdm_init(void)
+{
+ u32 i;
+
+ pr_info("ucc_tdm: " DRV_DESC "\n");
+ for (i = 0; i < 8; i++)
+ memcpy(&(utdm_info[i]), &utdm_primary_info,
+ sizeof(utdm_primary_info));
+
+ return of_register_platform_driver(&ucc_tdm_driver);
+}
+
+static void __exit ucc_tdm_exit(void)
+{
+ of_unregister_platform_driver(&ucc_tdm_driver);
+}
+
+module_init(ucc_tdm_init);
+module_exit(ucc_tdm_exit);
+MODULE_AUTHOR("Freescale Semiconductor, Inc");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_LICENSE("GPL");
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_INTEL_MID_PTI)	+= pti.o
 obj-$(CONFIG_ATMEL_PWM)		+= atmel_pwm.o
 obj-$(CONFIG_ATMEL_SSC)		+= atmel-ssc.o
 obj-$(CONFIG_ATMEL_TCLIB)	+= atmel_tclib.o
+obj-$(CONFIG_UCC_TDM)		+= ucc_tdm.o
 obj-$(CONFIG_BMP085)		+= bmp085.o
 obj-$(CONFIG_ICS932S401)	+= ics932s401.o
 obj-$(CONFIG_LKDTM)		+= lkdtm.o
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -211,6 +211,20 @@ config ATMEL_SSC
 
 	  If unsure, say N.
 
+config UCC_TDM
+	tristate "Freescale UCC TDM Driver"
+	depends on QUICC_ENGINE && UCC_FAST
+	default n
+	help
+	 The TDM driver is for UCC based TDM devices for example, TDM device on
+	 MPC832x RDB. Select it to run PowerVoIP on MPC832x RDB board.
+	 The TDM driver can interface with SLIC kind of devices to transmit
+	 and receive TDM samples. The TDM driver receives Time Division
+	 multiplexed samples(for different channels) from the SLIC device,
+	 demutiplexes them and sends them to the upper layers. At the transmit
+	 end the TDM drivers receives samples for different channels, it
+	 multiplexes them and sends them to the SLIC device.
+
 config ENCLOSURE_SERVICES
 	tristate "Enclosure Services"
 	default n
--- a/arch/powerpc/include/asm/ucc_fast.h
+++ b/arch/powerpc/include/asm/ucc_fast.h
@@ -150,6 +150,10 @@ struct ucc_fast_info {
 	enum ucc_fast_rx_decoding_method renc;
 	enum ucc_fast_transparent_tcrc tcrc;
 	enum ucc_fast_sync_len synl;
+	char *tdm_rx_clk;
+	char *tdm_tx_clk;
+	char *tdm_rx_sync;
+	char *tdm_tx_sync;
 };
 
 struct ucc_fast_private {
--- a/arch/powerpc/include/asm/qe.h
+++ b/arch/powerpc/include/asm/qe.h
@@ -669,6 +669,14 @@ struct ucc_slow_pram {
 #define UCC_GETH_UCCE_RXF1      0x00000002
 #define UCC_GETH_UCCE_RXF0      0x00000001
 
+/* Transparent UCC Event Register (UCCE) */
+#define UCC_TRANS_UCCE_GRA 0x0080
+#define UCC_TRANS_UCCE_TXE 0x0010
+#define UCC_TRANS_UCCE_RXF 0x0008
+#define UCC_TRANS_UCCE_BSY 0x0004
+#define UCC_TRANS_UCCE_TXB 0x0002
+#define UCC_TRANS_UCCE_RXB 0x0001
+
 /* UCC Protocol Specific Mode Register (UPSMR), when used for UART */
 #define UCC_UART_UPSMR_FLC		0x8000
 #define UCC_UART_UPSMR_SL		0x4000