mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-06 04:42:28 +02:00
2420 lines
63 KiB
C
2420 lines
63 KiB
C
|
/* ==========================================================================
|
||
|
* $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
|
||
|
* $Revision: #70 $
|
||
|
* $Date: 2008/10/14 $
|
||
|
* $Change: 1115682 $
|
||
|
*
|
||
|
* Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
|
||
|
* "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
|
||
|
* otherwise expressly agreed to in writing between Synopsys and you.
|
||
|
*
|
||
|
* The Software IS NOT an item of Licensed Software or Licensed Product under
|
||
|
* any End User Software License Agreement or Agreement for Licensed Product
|
||
|
* with Synopsys or any supplement thereto. You are permitted to use and
|
||
|
* redistribute this Software in source and binary forms, with or without
|
||
|
* modification, provided that redistributions of source code must retain this
|
||
|
* notice. You may not view, use, disclose, copy or distribute this file or
|
||
|
* any information contained herein except pursuant to this license grant from
|
||
|
* Synopsys. If you do not agree with this notice, including the disclaimer
|
||
|
* below, then you are not authorized to use the Software.
|
||
|
*
|
||
|
* THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
|
||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
|
* ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
|
||
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
|
||
|
* DAMAGE.
|
||
|
* ========================================================================== */
|
||
|
#ifndef DWC_HOST_ONLY
|
||
|
|
||
|
/** @file
|
||
|
* This file implements the Peripheral Controller Driver.
|
||
|
*
|
||
|
* The Peripheral Controller Driver (PCD) is responsible for
|
||
|
* translating requests from the Function Driver into the appropriate
|
||
|
* actions on the DWC_otg controller. It isolates the Function Driver
|
||
|
* from the specifics of the controller by providing an API to the
|
||
|
* Function Driver.
|
||
|
*
|
||
|
* The Peripheral Controller Driver for Linux will implement the
|
||
|
* Gadget API, so that the existing Gadget drivers can be used.
|
||
|
* (Gadget Driver is the Linux terminology for a Function Driver.)
|
||
|
*
|
||
|
* The Linux Gadget API is defined in the header file
|
||
|
* <code><linux/usb_gadget.h></code>. The USB EP operations API is
|
||
|
* defined in the structure <code>usb_ep_ops</code> and the USB
|
||
|
* Controller API is defined in the structure
|
||
|
* <code>usb_gadget_ops</code>.
|
||
|
*
|
||
|
* An important function of the PCD is managing interrupts generated
|
||
|
* by the DWC_otg controller. The implementation of the DWC_otg device
|
||
|
* mode interrupt service routines is in dwc_otg_pcd_intr.c.
|
||
|
*
|
||
|
* @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
|
||
|
* @todo Does it work when the request size is greater than DEPTSIZ
|
||
|
* transfer size
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
|
||
|
#include <linux/kernel.h>
|
||
|
#include <linux/module.h>
|
||
|
#include <linux/moduleparam.h>
|
||
|
#include <linux/init.h>
|
||
|
#include <linux/device.h>
|
||
|
#include <linux/platform_device.h>
|
||
|
#include <linux/errno.h>
|
||
|
#include <linux/list.h>
|
||
|
#include <linux/interrupt.h>
|
||
|
#include <linux/string.h>
|
||
|
#include <linux/dma-mapping.h>
|
||
|
#include <linux/version.h>
|
||
|
|
||
|
#include <mach/irqs.h>
|
||
|
#include <linux/usb/ch9.h>
|
||
|
|
||
|
//#include <linux/usb_gadget.h>
|
||
|
|
||
|
#include "otg_driver.h"
|
||
|
#include "otg_pcd.h"
|
||
|
|
||
|
|
||
|
|
||
|
/**
|
||
|
* Static PCD pointer for use in usb_gadget_register_driver and
|
||
|
* usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init.
|
||
|
*/
|
||
|
static dwc_otg_pcd_t *s_pcd = 0;
|
||
|
|
||
|
|
||
|
/* Display the contents of the buffer */
|
||
|
extern void dump_msg(const u8 *buf, unsigned int length);
|
||
|
|
||
|
|
||
|
/**
|
||
|
* This function completes a request. It call's the request call back.
|
||
|
*/
|
||
|
void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req,
|
||
|
int status)
|
||
|
{
|
||
|
unsigned stopped = ep->stopped;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep);
|
||
|
list_del_init(&req->queue);
|
||
|
|
||
|
if (req->req.status == -EINPROGRESS) {
|
||
|
req->req.status = status;
|
||
|
} else {
|
||
|
status = req->req.status;
|
||
|
}
|
||
|
|
||
|
/* don't modify queue heads during completion callback */
|
||
|
ep->stopped = 1;
|
||
|
SPIN_UNLOCK(&ep->pcd->lock);
|
||
|
req->req.complete(&ep->ep, &req->req);
|
||
|
SPIN_LOCK(&ep->pcd->lock);
|
||
|
|
||
|
if (ep->pcd->request_pending > 0) {
|
||
|
--ep->pcd->request_pending;
|
||
|
}
|
||
|
|
||
|
ep->stopped = stopped;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function terminates all the requsts in the EP request queue.
|
||
|
*/
|
||
|
void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep)
|
||
|
{
|
||
|
dwc_otg_pcd_request_t *req;
|
||
|
|
||
|
ep->stopped = 1;
|
||
|
|
||
|
/* called with irqs blocked?? */
|
||
|
while (!list_empty(&ep->queue)) {
|
||
|
req = list_entry(ep->queue.next, dwc_otg_pcd_request_t,
|
||
|
queue);
|
||
|
dwc_otg_request_done(ep, req, -ESHUTDOWN);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* USB Endpoint Operations */
|
||
|
/*
|
||
|
* The following sections briefly describe the behavior of the Gadget
|
||
|
* API endpoint operations implemented in the DWC_otg driver
|
||
|
* software. Detailed descriptions of the generic behavior of each of
|
||
|
* these functions can be found in the Linux header file
|
||
|
* include/linux/usb_gadget.h.
|
||
|
*
|
||
|
* The Gadget API provides wrapper functions for each of the function
|
||
|
* pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
|
||
|
* function, which then calls the underlying PCD function. The
|
||
|
* following sections are named according to the wrapper
|
||
|
* functions. Within each section, the corresponding DWC_otg PCD
|
||
|
* function name is specified.
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
* This function assigns periodic Tx FIFO to an periodic EP
|
||
|
* in shared Tx FIFO mode
|
||
|
*/
|
||
|
static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t *core_if)
|
||
|
{
|
||
|
uint32_t PerTxMsk = 1;
|
||
|
int i;
|
||
|
for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i)
|
||
|
{
|
||
|
if((PerTxMsk & core_if->p_tx_msk) == 0) {
|
||
|
core_if->p_tx_msk |= PerTxMsk;
|
||
|
return i + 1;
|
||
|
}
|
||
|
PerTxMsk <<= 1;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
/**
|
||
|
* This function releases periodic Tx FIFO
|
||
|
* in shared Tx FIFO mode
|
||
|
*/
|
||
|
static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
|
||
|
{
|
||
|
core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
|
||
|
}
|
||
|
/**
|
||
|
* This function assigns periodic Tx FIFO to an periodic EP
|
||
|
* in shared Tx FIFO mode
|
||
|
*/
|
||
|
static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if)
|
||
|
{
|
||
|
uint32_t TxMsk = 1;
|
||
|
int i;
|
||
|
|
||
|
for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i)
|
||
|
{
|
||
|
if((TxMsk & core_if->tx_msk) == 0) {
|
||
|
core_if->tx_msk |= TxMsk;
|
||
|
return i + 1;
|
||
|
}
|
||
|
TxMsk <<= 1;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
/**
|
||
|
* This function releases periodic Tx FIFO
|
||
|
* in shared Tx FIFO mode
|
||
|
*/
|
||
|
static void release_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num)
|
||
|
{
|
||
|
core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function is called by the Gadget Driver for each EP to be
|
||
|
* configured for the current configuration (SET_CONFIGURATION).
|
||
|
*
|
||
|
* This function initializes the dwc_otg_ep_t data structure, and then
|
||
|
* calls dwc_otg_ep_activate.
|
||
|
*/
|
||
|
static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep,
|
||
|
const struct usb_endpoint_descriptor *ep_desc)
|
||
|
{
|
||
|
dwc_otg_pcd_ep_t *ep = 0;
|
||
|
dwc_otg_pcd_t *pcd = 0;
|
||
|
unsigned long flags;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc);
|
||
|
|
||
|
ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
|
||
|
if (!usb_ep || !ep_desc || ep->desc ||
|
||
|
ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
|
||
|
DWC_WARN("%s, bad ep or descriptor\n", __func__);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
if (ep == &ep->pcd->ep0) {
|
||
|
DWC_WARN("%s, bad ep(0)\n", __func__);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
/* Check FIFO size? */
|
||
|
if (!ep_desc->wMaxPacketSize) {
|
||
|
DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
|
||
|
return -ERANGE;
|
||
|
}
|
||
|
|
||
|
pcd = ep->pcd;
|
||
|
if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
|
||
|
DWC_WARN("%s, bogus device state\n", __func__);
|
||
|
return -ESHUTDOWN;
|
||
|
}
|
||
|
|
||
|
SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
|
||
|
|
||
|
ep->desc = ep_desc;
|
||
|
ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize);
|
||
|
|
||
|
/*
|
||
|
* Activate the EP
|
||
|
*/
|
||
|
ep->stopped = 0;
|
||
|
|
||
|
ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0;
|
||
|
ep->dwc_ep.maxpacket = ep->ep.maxpacket;
|
||
|
|
||
|
ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
|
||
|
|
||
|
if(ep->dwc_ep.is_in) {
|
||
|
if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) {
|
||
|
ep->dwc_ep.tx_fifo_num = 0;
|
||
|
|
||
|
if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) {
|
||
|
/*
|
||
|
* if ISOC EP then assign a Periodic Tx FIFO.
|
||
|
*/
|
||
|
ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if);
|
||
|
}
|
||
|
} else {
|
||
|
/*
|
||
|
* if Dedicated FIFOs mode is on then assign a Tx FIFO.
|
||
|
*/
|
||
|
ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if);
|
||
|
|
||
|
}
|
||
|
}
|
||
|
/* Set initial data PID. */
|
||
|
if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) {
|
||
|
ep->dwc_ep.data_pid_start = 0;
|
||
|
}
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n",
|
||
|
ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"),
|
||
|
ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
|
||
|
|
||
|
if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) {
|
||
|
ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
|
||
|
}
|
||
|
|
||
|
dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
|
||
|
SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function is called when an EP is disabled due to disconnect or
|
||
|
* change in configuration. Any pending requests will terminate with a
|
||
|
* status of -ESHUTDOWN.
|
||
|
*
|
||
|
* This function modifies the dwc_otg_ep_t data structure for this EP,
|
||
|
* and then calls dwc_otg_ep_deactivate.
|
||
|
*/
|
||
|
static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep)
|
||
|
{
|
||
|
dwc_otg_pcd_ep_t *ep;
|
||
|
dwc_otg_pcd_t *pcd = 0;
|
||
|
unsigned long flags;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep);
|
||
|
ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
|
||
|
if (!usb_ep || !ep->desc) {
|
||
|
DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
|
||
|
usb_ep ? ep->ep.name : NULL);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
|
||
|
|
||
|
dwc_otg_request_nuke(ep);
|
||
|
|
||
|
dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
|
||
|
ep->desc = 0;
|
||
|
ep->stopped = 1;
|
||
|
|
||
|
if(ep->dwc_ep.is_in) {
|
||
|
dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
|
||
|
release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
|
||
|
release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num);
|
||
|
}
|
||
|
|
||
|
/* Free DMA Descriptors */
|
||
|
pcd = ep->pcd;
|
||
|
|
||
|
SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
|
||
|
|
||
|
if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) {
|
||
|
dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT);
|
||
|
}
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
|
||
|
/**
|
||
|
* This function allocates a request object to use with the specified
|
||
|
* endpoint.
|
||
|
*
|
||
|
* @param ep The endpoint to be used with with the request
|
||
|
* @param gfp_flags the GFP_* flags to use.
|
||
|
*/
|
||
|
static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
|
||
|
gfp_t gfp_flags)
|
||
|
{
|
||
|
dwc_otg_pcd_request_t *req;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags);
|
||
|
if (0 == ep) {
|
||
|
DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
|
||
|
return 0;
|
||
|
}
|
||
|
req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags);
|
||
|
if (0 == req) {
|
||
|
DWC_WARN("%s() %s\n", __func__,
|
||
|
"request allocation failed!\n");
|
||
|
return 0;
|
||
|
}
|
||
|
memset(req, 0, sizeof(dwc_otg_pcd_request_t));
|
||
|
req->req.dma = DMA_ADDR_INVALID;
|
||
|
INIT_LIST_HEAD(&req->queue);
|
||
|
return &req->req;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function frees a request object.
|
||
|
*
|
||
|
* @param ep The endpoint associated with the request
|
||
|
* @param req The request being freed
|
||
|
*/
|
||
|
static void dwc_otg_pcd_free_request(struct usb_ep *ep,
|
||
|
struct usb_request *req)
|
||
|
{
|
||
|
dwc_otg_pcd_request_t *request;
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req);
|
||
|
|
||
|
if (0 == ep || 0 == req) {
|
||
|
DWC_WARN("%s() %s\n", __func__,
|
||
|
"Invalid ep or req argument!\n");
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
request = container_of(req, dwc_otg_pcd_request_t, req);
|
||
|
kfree(request);
|
||
|
}
|
||
|
|
||
|
#if 0
|
||
|
/**
|
||
|
* This function allocates an I/O buffer to be used for a transfer
|
||
|
* to/from the specified endpoint.
|
||
|
*
|
||
|
* @param usb_ep The endpoint to be used with with the request
|
||
|
* @param bytes The desired number of bytes for the buffer
|
||
|
* @param dma Pointer to the buffer's DMA address; must be valid
|
||
|
* @param gfp_flags the GFP_* flags to use.
|
||
|
* @return address of a new buffer or null is buffer could not be allocated.
|
||
|
*/
|
||
|
static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
|
||
|
dma_addr_t *dma,
|
||
|
gfp_t gfp_flags)
|
||
|
{
|
||
|
void *buf;
|
||
|
dwc_otg_pcd_ep_t *ep;
|
||
|
dwc_otg_pcd_t *pcd = 0;
|
||
|
|
||
|
ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
|
||
|
pcd = ep->pcd;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
|
||
|
dma, gfp_flags);
|
||
|
|
||
|
/* Check dword alignment */
|
||
|
if ((bytes & 0x3UL) != 0) {
|
||
|
DWC_WARN("%s() Buffer size is not a multiple of"
|
||
|
"DWORD size (%d)",__func__, bytes);
|
||
|
}
|
||
|
|
||
|
if (GET_CORE_IF(pcd)->dma_enable) {
|
||
|
buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags);
|
||
|
}
|
||
|
else {
|
||
|
buf = kmalloc(bytes, gfp_flags);
|
||
|
}
|
||
|
|
||
|
/* Check dword alignment */
|
||
|
if (((int)buf & 0x3UL) != 0) {
|
||
|
DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
|
||
|
__func__, buf);
|
||
|
}
|
||
|
|
||
|
return buf;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function frees an I/O buffer that was allocated by alloc_buffer.
|
||
|
*
|
||
|
* @param usb_ep the endpoint associated with the buffer
|
||
|
* @param buf address of the buffer
|
||
|
* @param dma The buffer's DMA address
|
||
|
* @param bytes The number of bytes of the buffer
|
||
|
*/
|
||
|
static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
|
||
|
dma_addr_t dma, unsigned bytes)
|
||
|
{
|
||
|
dwc_otg_pcd_ep_t *ep;
|
||
|
dwc_otg_pcd_t *pcd = 0;
|
||
|
|
||
|
ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
|
||
|
pcd = ep->pcd;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes);
|
||
|
|
||
|
if (GET_CORE_IF(pcd)->dma_enable) {
|
||
|
dma_free_coherent (NULL, bytes, buf, dma);
|
||
|
}
|
||
|
else {
|
||
|
kfree(buf);
|
||
|
}
|
||
|
}
|
||
|
#endif
|
||
|
|
||
|
/**
|
||
|
* This function is used to submit an I/O Request to an EP.
|
||
|
*
|
||
|
* - When the request completes the request's completion callback
|
||
|
* is called to return the request to the driver.
|
||
|
* - An EP, except control EPs, may have multiple requests
|
||
|
* pending.
|
||
|
* - Once submitted the request cannot be examined or modified.
|
||
|
* - Each request is turned into one or more packets.
|
||
|
* - A BULK EP can queue any amount of data; the transfer is
|
||
|
* packetized.
|
||
|
* - Zero length Packets are specified with the request 'zero'
|
||
|
* flag.
|
||
|
*/
|
||
|
static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep,
|
||
|
struct usb_request *usb_req,
|
||
|
gfp_t gfp_flags)
|
||
|
{
|
||
|
int prevented = 0;
|
||
|
dwc_otg_pcd_request_t *req;
|
||
|
dwc_otg_pcd_ep_t *ep;
|
||
|
dwc_otg_pcd_t *pcd;
|
||
|
unsigned long flags = 0;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n",
|
||
|
__func__, usb_ep, usb_req, gfp_flags);
|
||
|
|
||
|
req = container_of(usb_req, dwc_otg_pcd_request_t, req);
|
||
|
if (!usb_req || !usb_req->complete || !usb_req->buf ||
|
||
|
!list_empty(&req->queue)) {
|
||
|
DWC_WARN("%s, bad params\n", __func__);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
|
||
|
if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) {
|
||
|
DWC_WARN("%s, bad ep\n", __func__);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
pcd = ep->pcd;
|
||
|
if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
|
||
|
DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
|
||
|
DWC_WARN("%s, bogus device state\n", __func__);
|
||
|
return -ESHUTDOWN;
|
||
|
}
|
||
|
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
|
||
|
usb_ep->name, usb_req, usb_req->length, usb_req->buf);
|
||
|
|
||
|
if (!GET_CORE_IF(pcd)->core_params->opt) {
|
||
|
if (ep->dwc_ep.num != 0) {
|
||
|
DWC_ERROR("%s queue req %p, len %d buf %p\n",
|
||
|
usb_ep->name, usb_req, usb_req->length, usb_req->buf);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
|
||
|
|
||
|
#if defined(DEBUG) & defined(VERBOSE)
|
||
|
dump_msg(usb_req->buf, usb_req->length);
|
||
|
#endif
|
||
|
|
||
|
usb_req->status = -EINPROGRESS;
|
||
|
usb_req->actual = 0;
|
||
|
|
||
|
/*
|
||
|
* For EP0 IN without premature status, zlp is required?
|
||
|
*/
|
||
|
if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
|
||
|
DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name);
|
||
|
//_req->zero = 1;
|
||
|
}
|
||
|
|
||
|
/* Start the transfer */
|
||
|
if (list_empty(&ep->queue) && !ep->stopped) {
|
||
|
/* EP0 Transfer? */
|
||
|
if (ep->dwc_ep.num == 0) {
|
||
|
switch (pcd->ep0state) {
|
||
|
case EP0_IN_DATA_PHASE:
|
||
|
DWC_DEBUGPL(DBG_PCD,
|
||
|
"%s ep0: EP0_IN_DATA_PHASE\n",
|
||
|
__func__);
|
||
|
break;
|
||
|
|
||
|
case EP0_OUT_DATA_PHASE:
|
||
|
DWC_DEBUGPL(DBG_PCD,
|
||
|
"%s ep0: EP0_OUT_DATA_PHASE\n",
|
||
|
__func__);
|
||
|
if (pcd->request_config) {
|
||
|
/* Complete STATUS PHASE */
|
||
|
ep->dwc_ep.is_in = 1;
|
||
|
pcd->ep0state = EP0_IN_STATUS_PHASE;
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
case EP0_IN_STATUS_PHASE:
|
||
|
DWC_DEBUGPL(DBG_PCD,
|
||
|
"%s ep0: EP0_IN_STATUS_PHASE\n",
|
||
|
__func__);
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
|
||
|
pcd->ep0state);
|
||
|
SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
|
||
|
return -EL2HLT;
|
||
|
}
|
||
|
ep->dwc_ep.dma_addr = usb_req->dma;
|
||
|
ep->dwc_ep.start_xfer_buff = usb_req->buf;
|
||
|
ep->dwc_ep.xfer_buff = usb_req->buf;
|
||
|
ep->dwc_ep.xfer_len = usb_req->length;
|
||
|
ep->dwc_ep.xfer_count = 0;
|
||
|
ep->dwc_ep.sent_zlp = 0;
|
||
|
ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
|
||
|
|
||
|
if(usb_req->zero) {
|
||
|
if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0)
|
||
|
&& (ep->dwc_ep.xfer_len != 0)) {
|
||
|
ep->dwc_ep.sent_zlp = 1;
|
||
|
}
|
||
|
|
||
|
}
|
||
|
|
||
|
ep_check_and_patch_dma_addr(ep);
|
||
|
dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
|
||
|
}
|
||
|
else {
|
||
|
|
||
|
uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
|
||
|
|
||
|
/* Setup and start the Transfer */
|
||
|
ep->dwc_ep.dma_addr = usb_req->dma;
|
||
|
ep->dwc_ep.start_xfer_buff = usb_req->buf;
|
||
|
ep->dwc_ep.xfer_buff = usb_req->buf;
|
||
|
ep->dwc_ep.sent_zlp = 0;
|
||
|
ep->dwc_ep.total_len = usb_req->length;
|
||
|
ep->dwc_ep.xfer_len = 0;
|
||
|
ep->dwc_ep.xfer_count = 0;
|
||
|
|
||
|
if(max_transfer > MAX_TRANSFER_SIZE) {
|
||
|
ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket);
|
||
|
} else {
|
||
|
ep->dwc_ep.maxxfer = max_transfer;
|
||
|
}
|
||
|
|
||
|
if(usb_req->zero) {
|
||
|
if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0)
|
||
|
&& (ep->dwc_ep.total_len != 0)) {
|
||
|
ep->dwc_ep.sent_zlp = 1;
|
||
|
}
|
||
|
|
||
|
}
|
||
|
|
||
|
ep_check_and_patch_dma_addr(ep);
|
||
|
dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if ((req != 0) || prevented) {
|
||
|
++pcd->request_pending;
|
||
|
list_add_tail(&req->queue, &ep->queue);
|
||
|
if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) {
|
||
|
/** @todo NGS Create a function for this. */
|
||
|
diepmsk_data_t diepmsk = { .d32 = 0};
|
||
|
diepmsk.b.intktxfemp = 1;
|
||
|
if(&GET_CORE_IF(pcd)->multiproc_int_enable) {
|
||
|
dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num],
|
||
|
0, diepmsk.d32);
|
||
|
} else {
|
||
|
dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
|
||
|
SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function cancels an I/O request from an EP.
|
||
|
*/
|
||
|
static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep,
|
||
|
struct usb_request *usb_req)
|
||
|
{
|
||
|
dwc_otg_pcd_request_t *req;
|
||
|
dwc_otg_pcd_ep_t *ep;
|
||
|
dwc_otg_pcd_t *pcd;
|
||
|
unsigned long flags;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req);
|
||
|
|
||
|
ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
|
||
|
if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) {
|
||
|
DWC_WARN("%s, bad argument\n", __func__);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
pcd = ep->pcd;
|
||
|
if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
|
||
|
DWC_WARN("%s, bogus device state\n", __func__);
|
||
|
return -ESHUTDOWN;
|
||
|
}
|
||
|
|
||
|
SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
|
||
|
DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name,
|
||
|
ep->dwc_ep.is_in ? "IN" : "OUT",
|
||
|
usb_req);
|
||
|
|
||
|
/* make sure it's actually queued on this endpoint */
|
||
|
list_for_each_entry(req, &ep->queue, queue)
|
||
|
{
|
||
|
if (&req->req == usb_req) {
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (&req->req != usb_req) {
|
||
|
SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
if (!list_empty(&req->queue)) {
|
||
|
dwc_otg_request_done(ep, req, -ECONNRESET);
|
||
|
}
|
||
|
else {
|
||
|
req = 0;
|
||
|
}
|
||
|
|
||
|
SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
|
||
|
|
||
|
return req ? 0 : -EOPNOTSUPP;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* usb_ep_set_halt stalls an endpoint.
|
||
|
*
|
||
|
* usb_ep_clear_halt clears an endpoint halt and resets its data
|
||
|
* toggle.
|
||
|
*
|
||
|
* Both of these functions are implemented with the same underlying
|
||
|
* function. The behavior depends on the value argument.
|
||
|
*
|
||
|
* @param[in] usb_ep the Endpoint to halt or clear halt.
|
||
|
* @param[in] value
|
||
|
* - 0 means clear_halt.
|
||
|
* - 1 means set_halt,
|
||
|
* - 2 means clear stall lock flag.
|
||
|
* - 3 means set stall lock flag.
|
||
|
*/
|
||
|
static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value)
|
||
|
{
|
||
|
int retval = 0;
|
||
|
unsigned long flags;
|
||
|
dwc_otg_pcd_ep_t *ep = 0;
|
||
|
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value);
|
||
|
|
||
|
ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
|
||
|
|
||
|
if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) ||
|
||
|
ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
|
||
|
DWC_WARN("%s, bad ep\n", __func__);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
|
||
|
if (!list_empty(&ep->queue)) {
|
||
|
DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name);
|
||
|
retval = -EAGAIN;
|
||
|
}
|
||
|
else if (value == 0) {
|
||
|
dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if,
|
||
|
&ep->dwc_ep);
|
||
|
}
|
||
|
else if(value == 1) {
|
||
|
if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) {
|
||
|
dtxfsts_data_t txstatus;
|
||
|
fifosize_data_t txfifosize;
|
||
|
|
||
|
txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]);
|
||
|
txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts);
|
||
|
|
||
|
if(txstatus.b.txfspcavail < txfifosize.b.depth) {
|
||
|
DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name);
|
||
|
retval = -EAGAIN;
|
||
|
}
|
||
|
else {
|
||
|
if (ep->dwc_ep.num == 0) {
|
||
|
ep->pcd->ep0state = EP0_STALL;
|
||
|
}
|
||
|
|
||
|
ep->stopped = 1;
|
||
|
dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
|
||
|
&ep->dwc_ep);
|
||
|
}
|
||
|
}
|
||
|
else {
|
||
|
if (ep->dwc_ep.num == 0) {
|
||
|
ep->pcd->ep0state = EP0_STALL;
|
||
|
}
|
||
|
|
||
|
ep->stopped = 1;
|
||
|
dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if,
|
||
|
&ep->dwc_ep);
|
||
|
}
|
||
|
}
|
||
|
else if (value == 2) {
|
||
|
ep->dwc_ep.stall_clear_flag = 0;
|
||
|
}
|
||
|
else if (value == 3) {
|
||
|
ep->dwc_ep.stall_clear_flag = 1;
|
||
|
}
|
||
|
|
||
|
SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags);
|
||
|
return retval;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function allocates a DMA Descriptor chain for the Endpoint
|
||
|
* buffer to be used for a transfer to/from the specified endpoint.
|
||
|
*/
|
||
|
dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count)
|
||
|
{
|
||
|
|
||
|
return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL);
|
||
|
}
|
||
|
|
||
|
LIST_HEAD(tofree_list);
|
||
|
DEFINE_SPINLOCK(tofree_list_lock);
|
||
|
|
||
|
struct free_param {
|
||
|
struct list_head list;
|
||
|
|
||
|
void* addr;
|
||
|
dma_addr_t dma_addr;
|
||
|
uint32_t size;
|
||
|
};
|
||
|
void free_list_agent_fn(void *data){
|
||
|
struct list_head free_list;
|
||
|
struct free_param *cur,*next;
|
||
|
|
||
|
spin_lock(&tofree_list_lock);
|
||
|
list_add(&free_list,&tofree_list);
|
||
|
list_del_init(&tofree_list);
|
||
|
spin_unlock(&tofree_list_lock);
|
||
|
|
||
|
list_for_each_entry_safe(cur,next,&free_list,list){
|
||
|
if(cur==&free_list) break;
|
||
|
dma_free_coherent(NULL,cur->size,cur->addr,cur->dma_addr);
|
||
|
list_del(&cur->list);
|
||
|
kfree(cur);
|
||
|
}
|
||
|
}
|
||
|
DECLARE_WORK(free_list_agent,free_list_agent_fn);
|
||
|
/**
|
||
|
* This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
|
||
|
*/
|
||
|
void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count)
|
||
|
{
|
||
|
if(irqs_disabled()){
|
||
|
struct free_param* fp=kmalloc(sizeof(struct free_param),GFP_KERNEL);
|
||
|
fp->addr=desc_addr;
|
||
|
fp->dma_addr=dma_desc_addr;
|
||
|
fp->size=count*sizeof(dwc_otg_dma_desc_t);
|
||
|
|
||
|
spin_lock(&tofree_list_lock);
|
||
|
list_add(&fp->list,&tofree_list);
|
||
|
spin_unlock(&tofree_list_lock);
|
||
|
|
||
|
schedule_work(&free_list_agent);
|
||
|
return ;
|
||
|
}
|
||
|
dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr);
|
||
|
}
|
||
|
|
||
|
#ifdef DWC_EN_ISOC
|
||
|
|
||
|
/**
|
||
|
* This function initializes a descriptor chain for Isochronous transfer
|
||
|
*
|
||
|
* @param core_if Programming view of DWC_otg controller.
|
||
|
* @param dwc_ep The EP to start the transfer on.
|
||
|
*
|
||
|
*/
|
||
|
void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep)
|
||
|
{
|
||
|
|
||
|
dsts_data_t dsts = { .d32 = 0};
|
||
|
depctl_data_t depctl = { .d32 = 0 };
|
||
|
volatile uint32_t *addr;
|
||
|
int i, j;
|
||
|
|
||
|
if(dwc_ep->is_in)
|
||
|
dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
|
||
|
else
|
||
|
dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
|
||
|
|
||
|
|
||
|
/** Allocate descriptors for double buffering */
|
||
|
dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2);
|
||
|
if(dwc_ep->desc_addr) {
|
||
|
DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
|
||
|
|
||
|
/** ISO OUT EP */
|
||
|
if(dwc_ep->is_in == 0) {
|
||
|
desc_sts_data_t sts = { .d32 =0 };
|
||
|
dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
|
||
|
dma_addr_t dma_ad;
|
||
|
uint32_t data_per_desc;
|
||
|
dwc_otg_dev_out_ep_regs_t *out_regs =
|
||
|
core_if->dev_if->out_ep_regs[dwc_ep->num];
|
||
|
int offset;
|
||
|
|
||
|
addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
|
||
|
dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma));
|
||
|
|
||
|
/** Buffer 0 descriptors setup */
|
||
|
dma_ad = dwc_ep->dma_addr0;
|
||
|
|
||
|
sts.b_iso_out.bs = BS_HOST_READY;
|
||
|
sts.b_iso_out.rxsts = 0;
|
||
|
sts.b_iso_out.l = 0;
|
||
|
sts.b_iso_out.sp = 0;
|
||
|
sts.b_iso_out.ioc = 0;
|
||
|
sts.b_iso_out.pid = 0;
|
||
|
sts.b_iso_out.framenum = 0;
|
||
|
|
||
|
offset = 0;
|
||
|
for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
|
||
|
{
|
||
|
|
||
|
for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
|
||
|
{
|
||
|
data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
|
||
|
dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
|
||
|
|
||
|
data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
|
||
|
sts.b_iso_out.rxbytes = data_per_desc;
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
|
||
|
offset += data_per_desc;
|
||
|
dma_desc ++;
|
||
|
//(uint32_t)dma_ad += data_per_desc;
|
||
|
dma_ad = (uint32_t)dma_ad + data_per_desc;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
|
||
|
{
|
||
|
data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
|
||
|
dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
|
||
|
data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
|
||
|
sts.b_iso_out.rxbytes = data_per_desc;
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
|
||
|
offset += data_per_desc;
|
||
|
dma_desc ++;
|
||
|
//(uint32_t)dma_ad += data_per_desc;
|
||
|
dma_ad = (uint32_t)dma_ad + data_per_desc;
|
||
|
}
|
||
|
|
||
|
sts.b_iso_out.ioc = 1;
|
||
|
data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
|
||
|
dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
|
||
|
data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
|
||
|
sts.b_iso_out.rxbytes = data_per_desc;
|
||
|
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
dma_desc ++;
|
||
|
|
||
|
/** Buffer 1 descriptors setup */
|
||
|
sts.b_iso_out.ioc = 0;
|
||
|
dma_ad = dwc_ep->dma_addr1;
|
||
|
|
||
|
offset = 0;
|
||
|
for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
|
||
|
{
|
||
|
for(j = 0; j < dwc_ep->pkt_per_frm; ++j)
|
||
|
{
|
||
|
data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
|
||
|
dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
|
||
|
data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
|
||
|
sts.b_iso_out.rxbytes = data_per_desc;
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
|
||
|
offset += data_per_desc;
|
||
|
dma_desc ++;
|
||
|
//(uint32_t)dma_ad += data_per_desc;
|
||
|
dma_ad = (uint32_t)dma_ad + data_per_desc;
|
||
|
}
|
||
|
}
|
||
|
for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j)
|
||
|
{
|
||
|
data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
|
||
|
dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
|
||
|
data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
|
||
|
sts.b_iso_out.rxbytes = data_per_desc;
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
|
||
|
offset += data_per_desc;
|
||
|
dma_desc ++;
|
||
|
//(uint32_t)dma_ad += data_per_desc;
|
||
|
dma_ad = (uint32_t)dma_ad + data_per_desc;
|
||
|
}
|
||
|
|
||
|
sts.b_iso_out.ioc = 1;
|
||
|
sts.b_iso_out.l = 1;
|
||
|
data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ?
|
||
|
dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket;
|
||
|
data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0;
|
||
|
sts.b_iso_out.rxbytes = data_per_desc;
|
||
|
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
|
||
|
dwc_ep->next_frame = 0;
|
||
|
|
||
|
/** Write dma_ad into DOEPDMA register */
|
||
|
dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
|
||
|
|
||
|
}
|
||
|
/** ISO IN EP */
|
||
|
else {
|
||
|
desc_sts_data_t sts = { .d32 =0 };
|
||
|
dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr;
|
||
|
dma_addr_t dma_ad;
|
||
|
dwc_otg_dev_in_ep_regs_t *in_regs =
|
||
|
core_if->dev_if->in_ep_regs[dwc_ep->num];
|
||
|
unsigned int frmnumber;
|
||
|
fifosize_data_t txfifosize,rxfifosize;
|
||
|
|
||
|
txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts);
|
||
|
rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz);
|
||
|
|
||
|
|
||
|
addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
|
||
|
|
||
|
dma_ad = dwc_ep->dma_addr0;
|
||
|
|
||
|
dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
|
||
|
|
||
|
sts.b_iso_in.bs = BS_HOST_READY;
|
||
|
sts.b_iso_in.txsts = 0;
|
||
|
sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0;
|
||
|
sts.b_iso_in.ioc = 0;
|
||
|
sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
|
||
|
|
||
|
|
||
|
frmnumber = dwc_ep->next_frame;
|
||
|
|
||
|
sts.b_iso_in.framenum = frmnumber;
|
||
|
sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
|
||
|
sts.b_iso_in.l = 0;
|
||
|
|
||
|
/** Buffer 0 descriptors setup */
|
||
|
for(i = 0; i < dwc_ep->desc_cnt - 1; i++)
|
||
|
{
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
dma_desc ++;
|
||
|
|
||
|
//(uint32_t)dma_ad += dwc_ep->data_per_frame;
|
||
|
dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
|
||
|
sts.b_iso_in.framenum += dwc_ep->bInterval;
|
||
|
}
|
||
|
|
||
|
sts.b_iso_in.ioc = 1;
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
++dma_desc;
|
||
|
|
||
|
/** Buffer 1 descriptors setup */
|
||
|
sts.b_iso_in.ioc = 0;
|
||
|
dma_ad = dwc_ep->dma_addr1;
|
||
|
|
||
|
for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm)
|
||
|
{
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
dma_desc ++;
|
||
|
|
||
|
//(uint32_t)dma_ad += dwc_ep->data_per_frame;
|
||
|
dma_ad = (uint32_t)dma_ad + dwc_ep->data_per_frame;
|
||
|
sts.b_iso_in.framenum += dwc_ep->bInterval;
|
||
|
|
||
|
sts.b_iso_in.ioc = 0;
|
||
|
}
|
||
|
sts.b_iso_in.ioc = 1;
|
||
|
sts.b_iso_in.l = 1;
|
||
|
|
||
|
writel((uint32_t)dma_ad, &dma_desc->buf);
|
||
|
writel(sts.d32, &dma_desc->status);
|
||
|
|
||
|
dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
|
||
|
|
||
|
/** Write dma_ad into diepdma register */
|
||
|
dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr);
|
||
|
}
|
||
|
/** Enable endpoint, clear nak */
|
||
|
depctl.d32 = 0;
|
||
|
depctl.b.epena = 1;
|
||
|
depctl.b.usbactep = 1;
|
||
|
depctl.b.cnak = 1;
|
||
|
|
||
|
dwc_modify_reg32(addr, depctl.d32,depctl.d32);
|
||
|
depctl.d32 = dwc_read_reg32(addr);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function initializes a descriptor chain for Isochronous transfer
|
||
|
*
|
||
|
* @param core_if Programming view of DWC_otg controller.
|
||
|
* @param ep The EP to start the transfer on.
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
|
||
|
{
|
||
|
depctl_data_t depctl = { .d32 = 0 };
|
||
|
volatile uint32_t *addr;
|
||
|
|
||
|
|
||
|
if(ep->is_in) {
|
||
|
addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
|
||
|
} else {
|
||
|
addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
|
||
|
}
|
||
|
|
||
|
|
||
|
if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) {
|
||
|
return;
|
||
|
} else {
|
||
|
deptsiz_data_t deptsiz = { .d32 = 0 };
|
||
|
|
||
|
ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
|
||
|
ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) /
|
||
|
ep->maxpacket;
|
||
|
ep->xfer_count = 0;
|
||
|
ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
|
||
|
ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
|
||
|
|
||
|
if(ep->is_in) {
|
||
|
/* Program the transfer size and packet count
|
||
|
* as follows: xfersize = N * maxpacket +
|
||
|
* short_packet pktcnt = N + (short_packet
|
||
|
* exist ? 1 : 0)
|
||
|
*/
|
||
|
deptsiz.b.mc = ep->pkt_per_frm;
|
||
|
deptsiz.b.xfersize = ep->xfer_len;
|
||
|
deptsiz.b.pktcnt =
|
||
|
(ep->xfer_len - 1 + ep->maxpacket) /
|
||
|
ep->maxpacket;
|
||
|
dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32);
|
||
|
|
||
|
/* Write the DMA register */
|
||
|
dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr);
|
||
|
|
||
|
} else {
|
||
|
deptsiz.b.pktcnt =
|
||
|
(ep->xfer_len + (ep->maxpacket - 1)) /
|
||
|
ep->maxpacket;
|
||
|
deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
|
||
|
|
||
|
dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
|
||
|
|
||
|
/* Write the DMA register */
|
||
|
dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr);
|
||
|
|
||
|
}
|
||
|
/** Enable endpoint, clear nak */
|
||
|
depctl.d32 = 0;
|
||
|
dwc_modify_reg32(addr, depctl.d32,depctl.d32);
|
||
|
|
||
|
depctl.b.epena = 1;
|
||
|
depctl.b.cnak = 1;
|
||
|
|
||
|
dwc_modify_reg32(addr, depctl.d32,depctl.d32);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
|
||
|
/**
|
||
|
* This function does the setup for a data transfer for an EP and
|
||
|
* starts the transfer. For an IN transfer, the packets will be
|
||
|
* loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
|
||
|
* the packets are unloaded from the Rx FIFO in the ISR. the ISR.
|
||
|
*
|
||
|
* @param core_if Programming view of DWC_otg controller.
|
||
|
* @param ep The EP to start the transfer on.
|
||
|
*/
|
||
|
|
||
|
void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
|
||
|
{
|
||
|
if(core_if->dma_enable) {
|
||
|
if(core_if->dma_desc_enable) {
|
||
|
if(ep->is_in) {
|
||
|
ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
|
||
|
} else {
|
||
|
ep->desc_cnt = ep->pkt_cnt;
|
||
|
}
|
||
|
dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
|
||
|
} else {
|
||
|
if(core_if->pti_enh_enable) {
|
||
|
dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
|
||
|
} else {
|
||
|
ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
|
||
|
ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
|
||
|
dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
|
||
|
}
|
||
|
}
|
||
|
} else {
|
||
|
ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
|
||
|
ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
|
||
|
dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function does the setup for a data transfer for an EP and
|
||
|
* starts the transfer. For an IN transfer, the packets will be
|
||
|
* loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
|
||
|
* the packets are unloaded from the Rx FIFO in the ISR. the ISR.
|
||
|
*
|
||
|
* @param core_if Programming view of DWC_otg controller.
|
||
|
* @param ep The EP to start the transfer on.
|
||
|
*/
|
||
|
|
||
|
void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep)
|
||
|
{
|
||
|
depctl_data_t depctl = { .d32 = 0 };
|
||
|
volatile uint32_t *addr;
|
||
|
|
||
|
if(ep->is_in == 1) {
|
||
|
addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
|
||
|
}
|
||
|
else {
|
||
|
addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
|
||
|
}
|
||
|
|
||
|
/* disable the ep */
|
||
|
depctl.d32 = dwc_read_reg32(addr);
|
||
|
|
||
|
depctl.b.epdis = 1;
|
||
|
depctl.b.snak = 1;
|
||
|
|
||
|
dwc_write_reg32(addr, depctl.d32);
|
||
|
|
||
|
if(core_if->dma_desc_enable &&
|
||
|
ep->iso_desc_addr && ep->iso_dma_desc_addr) {
|
||
|
dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2);
|
||
|
}
|
||
|
|
||
|
/* reset varibales */
|
||
|
ep->dma_addr0 = 0;
|
||
|
ep->dma_addr1 = 0;
|
||
|
ep->xfer_buff0 = 0;
|
||
|
ep->xfer_buff1 = 0;
|
||
|
ep->data_per_frame = 0;
|
||
|
ep->data_pattern_frame = 0;
|
||
|
ep->sync_frame = 0;
|
||
|
ep->buf_proc_intrvl = 0;
|
||
|
ep->bInterval = 0;
|
||
|
ep->proc_buf_num = 0;
|
||
|
ep->pkt_per_frm = 0;
|
||
|
ep->pkt_per_frm = 0;
|
||
|
ep->desc_cnt = 0;
|
||
|
ep->iso_desc_addr = 0;
|
||
|
ep->iso_dma_desc_addr = 0;
|
||
|
}
|
||
|
|
||
|
|
||
|
/**
|
||
|
* This function is used to submit an ISOC Transfer Request to an EP.
|
||
|
*
|
||
|
* - Every time a sync period completes the request's completion callback
|
||
|
* is called to provide data to the gadget driver.
|
||
|
* - Once submitted the request cannot be modified.
|
||
|
* - Each request is turned into periodic data packets untill ISO
|
||
|
* Transfer is stopped..
|
||
|
*/
|
||
|
static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
|
||
|
gfp_t gfp_flags)
|
||
|
{
|
||
|
dwc_otg_pcd_ep_t *ep;
|
||
|
dwc_otg_pcd_t *pcd;
|
||
|
dwc_ep_t *dwc_ep;
|
||
|
unsigned long flags = 0;
|
||
|
int32_t frm_data;
|
||
|
dwc_otg_core_if_t *core_if;
|
||
|
dcfg_data_t dcfg;
|
||
|
dsts_data_t dsts;
|
||
|
|
||
|
|
||
|
if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
|
||
|
DWC_WARN("%s, bad params\n", __func__);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
|
||
|
|
||
|
if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
|
||
|
DWC_WARN("%s, bad ep\n", __func__);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
pcd = ep->pcd;
|
||
|
core_if = GET_CORE_IF(pcd);
|
||
|
|
||
|
dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg);
|
||
|
|
||
|
if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
|
||
|
DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
|
||
|
DWC_WARN("%s, bogus device state\n", __func__);
|
||
|
return -ESHUTDOWN;
|
||
|
}
|
||
|
|
||
|
SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags);
|
||
|
|
||
|
dwc_ep = &ep->dwc_ep;
|
||
|
|
||
|
if(ep->iso_req) {
|
||
|
DWC_WARN("%s, iso request in progress\n", __func__);
|
||
|
}
|
||
|
req->status = -EINPROGRESS;
|
||
|
|
||
|
dwc_ep->dma_addr0 = req->dma0;
|
||
|
dwc_ep->dma_addr1 = req->dma1;
|
||
|
|
||
|
dwc_ep->xfer_buff0 = req->buf0;
|
||
|
dwc_ep->xfer_buff1 = req->buf1;
|
||
|
|
||
|
ep->iso_req = req;
|
||
|
|
||
|
dwc_ep->data_per_frame = req->data_per_frame;
|
||
|
|
||
|
/** @todo - pattern data support is to be implemented in the future */
|
||
|
dwc_ep->data_pattern_frame = req->data_pattern_frame;
|
||
|
dwc_ep->sync_frame = req->sync_frame;
|
||
|
|
||
|
dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl;
|
||
|
|
||
|
dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
|
||
|
|
||
|
dwc_ep->proc_buf_num = 0;
|
||
|
|
||
|
dwc_ep->pkt_per_frm = 0;
|
||
|
frm_data = ep->dwc_ep.data_per_frame;
|
||
|
while(frm_data > 0) {
|
||
|
dwc_ep->pkt_per_frm++;
|
||
|
frm_data -= ep->dwc_ep.maxpacket;
|
||
|
}
|
||
|
|
||
|
dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts);
|
||
|
|
||
|
if(req->flags & USB_REQ_ISO_ASAP) {
|
||
|
dwc_ep->next_frame = dsts.b.soffn + 1;
|
||
|
if(dwc_ep->bInterval != 1){
|
||
|
dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval);
|
||
|
}
|
||
|
} else {
|
||
|
dwc_ep->next_frame = req->start_frame;
|
||
|
}
|
||
|
|
||
|
|
||
|
if(!core_if->pti_enh_enable) {
|
||
|
dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
|
||
|
} else {
|
||
|
dwc_ep->pkt_cnt =
|
||
|
(dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
|
||
|
- 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
|
||
|
}
|
||
|
|
||
|
if(core_if->dma_desc_enable) {
|
||
|
dwc_ep->desc_cnt =
|
||
|
dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval;
|
||
|
}
|
||
|
|
||
|
dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL);
|
||
|
if(!dwc_ep->pkt_info) {
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
if(core_if->pti_enh_enable) {
|
||
|
memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
|
||
|
}
|
||
|
|
||
|
dwc_ep->cur_pkt = 0;
|
||
|
|
||
|
SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
|
||
|
|
||
|
dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function stops ISO EP Periodic Data Transfer.
|
||
|
*/
|
||
|
static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
|
||
|
{
|
||
|
dwc_otg_pcd_ep_t *ep;
|
||
|
dwc_otg_pcd_t *pcd;
|
||
|
dwc_ep_t *dwc_ep;
|
||
|
unsigned long flags;
|
||
|
|
||
|
ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep);
|
||
|
|
||
|
if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) {
|
||
|
DWC_WARN("%s, bad ep\n", __func__);
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
pcd = ep->pcd;
|
||
|
|
||
|
if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) {
|
||
|
DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed);
|
||
|
DWC_WARN("%s, bogus device state\n", __func__);
|
||
|
return -ESHUTDOWN;
|
||
|
}
|
||
|
|
||
|
dwc_ep = &ep->dwc_ep;
|
||
|
|
||
|
dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
|
||
|
|
||
|
kfree(dwc_ep->pkt_info);
|
||
|
|
||
|
SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
|
||
|
|
||
|
if(ep->iso_req != req) {
|
||
|
return -EINVAL;
|
||
|
}
|
||
|
|
||
|
req->status = -ECONNRESET;
|
||
|
|
||
|
SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
|
||
|
|
||
|
|
||
|
ep->iso_req = 0;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function is used for perodical data exchnage between PCD and gadget drivers.
|
||
|
* for Isochronous EPs
|
||
|
*
|
||
|
* - Every time a sync period completes this function is called to
|
||
|
* perform data exchange between PCD and gadget
|
||
|
*/
|
||
|
void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req)
|
||
|
{
|
||
|
int i;
|
||
|
struct usb_gadget_iso_packet_descriptor *iso_packet;
|
||
|
dwc_ep_t *dwc_ep;
|
||
|
|
||
|
dwc_ep = &ep->dwc_ep;
|
||
|
|
||
|
if(ep->iso_req->status == -ECONNRESET) {
|
||
|
DWC_PRINT("Device has already disconnected\n");
|
||
|
/*Device has been disconnected*/
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
if(dwc_ep->proc_buf_num != 0) {
|
||
|
iso_packet = ep->iso_req->iso_packet_desc0;
|
||
|
}
|
||
|
|
||
|
else {
|
||
|
iso_packet = ep->iso_req->iso_packet_desc1;
|
||
|
}
|
||
|
|
||
|
/* Fill in ISOC packets descriptors & pass to gadget driver*/
|
||
|
|
||
|
for(i = 0; i < dwc_ep->pkt_cnt; ++i) {
|
||
|
iso_packet[i].status = dwc_ep->pkt_info[i].status;
|
||
|
iso_packet[i].offset = dwc_ep->pkt_info[i].offset;
|
||
|
iso_packet[i].actual_length = dwc_ep->pkt_info[i].length;
|
||
|
dwc_ep->pkt_info[i].status = 0;
|
||
|
dwc_ep->pkt_info[i].offset = 0;
|
||
|
dwc_ep->pkt_info[i].length = 0;
|
||
|
}
|
||
|
|
||
|
/* Call callback function to process data buffer */
|
||
|
ep->iso_req->status = 0;/* success */
|
||
|
|
||
|
SPIN_UNLOCK(&ep->pcd->lock);
|
||
|
ep->iso_req->process_buffer(&ep->ep, ep->iso_req);
|
||
|
SPIN_LOCK(&ep->pcd->lock);
|
||
|
}
|
||
|
|
||
|
|
||
|
static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets,
|
||
|
gfp_t gfp_flags)
|
||
|
{
|
||
|
struct usb_iso_request *pReq = NULL;
|
||
|
uint32_t req_size;
|
||
|
|
||
|
|
||
|
req_size = sizeof(struct usb_iso_request);
|
||
|
req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
|
||
|
|
||
|
|
||
|
pReq = kmalloc(req_size, gfp_flags);
|
||
|
if (!pReq) {
|
||
|
DWC_WARN("%s, can't allocate Iso Request\n", __func__);
|
||
|
return 0;
|
||
|
}
|
||
|
pReq->iso_packet_desc0 = (void*) (pReq + 1);
|
||
|
|
||
|
pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
|
||
|
|
||
|
return pReq;
|
||
|
}
|
||
|
|
||
|
static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
|
||
|
{
|
||
|
kfree(req);
|
||
|
}
|
||
|
|
||
|
static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops =
|
||
|
{
|
||
|
.ep_ops =
|
||
|
{
|
||
|
.enable = dwc_otg_pcd_ep_enable,
|
||
|
.disable = dwc_otg_pcd_ep_disable,
|
||
|
|
||
|
.alloc_request = dwc_otg_pcd_alloc_request,
|
||
|
.free_request = dwc_otg_pcd_free_request,
|
||
|
|
||
|
//.alloc_buffer = dwc_otg_pcd_alloc_buffer,
|
||
|
//.free_buffer = dwc_otg_pcd_free_buffer,
|
||
|
|
||
|
.queue = dwc_otg_pcd_ep_queue,
|
||
|
.dequeue = dwc_otg_pcd_ep_dequeue,
|
||
|
|
||
|
.set_halt = dwc_otg_pcd_ep_set_halt,
|
||
|
.fifo_status = 0,
|
||
|
.fifo_flush = 0,
|
||
|
},
|
||
|
.iso_ep_start = dwc_otg_pcd_iso_ep_start,
|
||
|
.iso_ep_stop = dwc_otg_pcd_iso_ep_stop,
|
||
|
.alloc_iso_request = dwc_otg_pcd_alloc_iso_request,
|
||
|
.free_iso_request = dwc_otg_pcd_free_iso_request,
|
||
|
};
|
||
|
|
||
|
#else
|
||
|
|
||
|
|
||
|
static struct usb_ep_ops dwc_otg_pcd_ep_ops =
|
||
|
{
|
||
|
.enable = dwc_otg_pcd_ep_enable,
|
||
|
.disable = dwc_otg_pcd_ep_disable,
|
||
|
|
||
|
.alloc_request = dwc_otg_pcd_alloc_request,
|
||
|
.free_request = dwc_otg_pcd_free_request,
|
||
|
|
||
|
// .alloc_buffer = dwc_otg_pcd_alloc_buffer,
|
||
|
// .free_buffer = dwc_otg_pcd_free_buffer,
|
||
|
|
||
|
.queue = dwc_otg_pcd_ep_queue,
|
||
|
.dequeue = dwc_otg_pcd_ep_dequeue,
|
||
|
|
||
|
.set_halt = dwc_otg_pcd_ep_set_halt,
|
||
|
.fifo_status = 0,
|
||
|
.fifo_flush = 0,
|
||
|
|
||
|
|
||
|
};
|
||
|
|
||
|
#endif /* DWC_EN_ISOC */
|
||
|
/* Gadget Operations */
|
||
|
/**
|
||
|
* The following gadget operations will be implemented in the DWC_otg
|
||
|
* PCD. Functions in the API that are not described below are not
|
||
|
* implemented.
|
||
|
*
|
||
|
* The Gadget API provides wrapper functions for each of the function
|
||
|
* pointers defined in usb_gadget_ops. The Gadget Driver calls the
|
||
|
* wrapper function, which then calls the underlying PCD function. The
|
||
|
* following sections are named according to the wrapper functions
|
||
|
* (except for ioctl, which doesn't have a wrapper function). Within
|
||
|
* each section, the corresponding DWC_otg PCD function name is
|
||
|
* specified.
|
||
|
*
|
||
|
*/
|
||
|
|
||
|
/**
|
||
|
*Gets the USB Frame number of the last SOF.
|
||
|
*/
|
||
|
static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget)
|
||
|
{
|
||
|
dwc_otg_pcd_t *pcd;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
|
||
|
|
||
|
if (gadget == 0) {
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
else {
|
||
|
pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
|
||
|
dwc_otg_get_frame_number(GET_CORE_IF(pcd));
|
||
|
}
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd)
|
||
|
{
|
||
|
uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl);
|
||
|
gotgctl_data_t mem;
|
||
|
gotgctl_data_t val;
|
||
|
|
||
|
val.d32 = dwc_read_reg32(addr);
|
||
|
if (val.b.sesreq) {
|
||
|
DWC_ERROR("Session Request Already active!\n");
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
DWC_NOTICE("Session Request Initated\n");
|
||
|
mem.d32 = dwc_read_reg32(addr);
|
||
|
mem.b.sesreq = 1;
|
||
|
dwc_write_reg32(addr, mem.d32);
|
||
|
|
||
|
/* Start the SRP timer */
|
||
|
dwc_otg_pcd_start_srp_timer(pcd);
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set)
|
||
|
{
|
||
|
dctl_data_t dctl = {.d32=0};
|
||
|
volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl);
|
||
|
|
||
|
if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
|
||
|
if (pcd->remote_wakeup_enable) {
|
||
|
if (set) {
|
||
|
dctl.b.rmtwkupsig = 1;
|
||
|
dwc_modify_reg32(addr, 0, dctl.d32);
|
||
|
DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
|
||
|
mdelay(1);
|
||
|
dwc_modify_reg32(addr, dctl.d32, 0);
|
||
|
DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
|
||
|
}
|
||
|
else {
|
||
|
}
|
||
|
}
|
||
|
else {
|
||
|
DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
|
||
|
}
|
||
|
}
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* Initiates Session Request Protocol (SRP) to wakeup the host if no
|
||
|
* session is in progress. If a session is already in progress, but
|
||
|
* the device is suspended, remote wakeup signaling is started.
|
||
|
*
|
||
|
*/
|
||
|
static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget)
|
||
|
{
|
||
|
unsigned long flags;
|
||
|
dwc_otg_pcd_t *pcd;
|
||
|
dsts_data_t dsts;
|
||
|
gotgctl_data_t gotgctl;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget);
|
||
|
|
||
|
if (gadget == 0) {
|
||
|
return -ENODEV;
|
||
|
}
|
||
|
else {
|
||
|
pcd = container_of(gadget, dwc_otg_pcd_t, gadget);
|
||
|
}
|
||
|
SPIN_LOCK_IRQSAVE(&pcd->lock, flags);
|
||
|
|
||
|
/*
|
||
|
* This function starts the Protocol if no session is in progress. If
|
||
|
* a session is already in progress, but the device is suspended,
|
||
|
* remote wakeup signaling is started.
|
||
|
*/
|
||
|
|
||
|
/* Check if valid session */
|
||
|
gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
|
||
|
if (gotgctl.b.bsesvld) {
|
||
|
/* Check if suspend state */
|
||
|
dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts));
|
||
|
if (dsts.b.suspsts) {
|
||
|
dwc_otg_pcd_remote_wakeup(pcd, 1);
|
||
|
}
|
||
|
}
|
||
|
else {
|
||
|
dwc_otg_pcd_initiate_srp(pcd);
|
||
|
}
|
||
|
|
||
|
SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags);
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
static const struct usb_gadget_ops dwc_otg_pcd_ops =
|
||
|
{
|
||
|
.get_frame = dwc_otg_pcd_get_frame,
|
||
|
.wakeup = dwc_otg_pcd_wakeup,
|
||
|
// current versions must always be self-powered
|
||
|
};
|
||
|
|
||
|
/**
|
||
|
* This function updates the otg values in the gadget structure.
|
||
|
*/
|
||
|
void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset)
|
||
|
{
|
||
|
|
||
|
if (!pcd->gadget.is_otg)
|
||
|
return;
|
||
|
|
||
|
if (reset) {
|
||
|
pcd->b_hnp_enable = 0;
|
||
|
pcd->a_hnp_support = 0;
|
||
|
pcd->a_alt_hnp_support = 0;
|
||
|
}
|
||
|
|
||
|
pcd->gadget.b_hnp_enable = pcd->b_hnp_enable;
|
||
|
pcd->gadget.a_hnp_support = pcd->a_hnp_support;
|
||
|
pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function is the top level PCD interrupt handler.
|
||
|
*/
|
||
|
static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev)
|
||
|
{
|
||
|
dwc_otg_pcd_t *pcd = dev;
|
||
|
int32_t retval = IRQ_NONE;
|
||
|
|
||
|
retval = dwc_otg_pcd_handle_intr(pcd);
|
||
|
return IRQ_RETVAL(retval);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* PCD Callback function for initializing the PCD when switching to
|
||
|
* device mode.
|
||
|
*
|
||
|
* @param p void pointer to the <code>dwc_otg_pcd_t</code>
|
||
|
*/
|
||
|
static int32_t dwc_otg_pcd_start_cb(void *p)
|
||
|
{
|
||
|
dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
|
||
|
|
||
|
/*
|
||
|
* Initialized the Core for Device mode.
|
||
|
*/
|
||
|
if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) {
|
||
|
dwc_otg_core_dev_init(GET_CORE_IF(pcd));
|
||
|
}
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* PCD Callback function for stopping the PCD when switching to Host
|
||
|
* mode.
|
||
|
*
|
||
|
* @param p void pointer to the <code>dwc_otg_pcd_t</code>
|
||
|
*/
|
||
|
static int32_t dwc_otg_pcd_stop_cb(void *p)
|
||
|
{
|
||
|
dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
|
||
|
extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd);
|
||
|
|
||
|
dwc_otg_pcd_stop(pcd);
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
|
||
|
/**
|
||
|
* PCD Callback function for notifying the PCD when resuming from
|
||
|
* suspend.
|
||
|
*
|
||
|
* @param p void pointer to the <code>dwc_otg_pcd_t</code>
|
||
|
*/
|
||
|
static int32_t dwc_otg_pcd_suspend_cb(void *p)
|
||
|
{
|
||
|
dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
|
||
|
|
||
|
if (pcd->driver && pcd->driver->resume) {
|
||
|
SPIN_UNLOCK(&pcd->lock);
|
||
|
pcd->driver->suspend(&pcd->gadget);
|
||
|
SPIN_LOCK(&pcd->lock);
|
||
|
}
|
||
|
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
|
||
|
/**
|
||
|
* PCD Callback function for notifying the PCD when resuming from
|
||
|
* suspend.
|
||
|
*
|
||
|
* @param p void pointer to the <code>dwc_otg_pcd_t</code>
|
||
|
*/
|
||
|
static int32_t dwc_otg_pcd_resume_cb(void *p)
|
||
|
{
|
||
|
dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p;
|
||
|
|
||
|
if (pcd->driver && pcd->driver->resume) {
|
||
|
SPIN_UNLOCK(&pcd->lock);
|
||
|
pcd->driver->resume(&pcd->gadget);
|
||
|
SPIN_LOCK(&pcd->lock);
|
||
|
}
|
||
|
|
||
|
/* Stop the SRP timeout timer. */
|
||
|
if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) ||
|
||
|
(!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
|
||
|
if (GET_CORE_IF(pcd)->srp_timer_started) {
|
||
|
GET_CORE_IF(pcd)->srp_timer_started = 0;
|
||
|
del_timer(&pcd->srp_timer);
|
||
|
}
|
||
|
}
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
|
||
|
/**
|
||
|
* PCD Callback structure for handling mode switching.
|
||
|
*/
|
||
|
static dwc_otg_cil_callbacks_t pcd_callbacks =
|
||
|
{
|
||
|
.start = dwc_otg_pcd_start_cb,
|
||
|
.stop = dwc_otg_pcd_stop_cb,
|
||
|
.suspend = dwc_otg_pcd_suspend_cb,
|
||
|
.resume_wakeup = dwc_otg_pcd_resume_cb,
|
||
|
.p = 0, /* Set at registration */
|
||
|
};
|
||
|
|
||
|
/**
|
||
|
* This function is called when the SRP timer expires. The SRP should
|
||
|
* complete within 6 seconds.
|
||
|
*/
|
||
|
static void srp_timeout(unsigned long ptr)
|
||
|
{
|
||
|
gotgctl_data_t gotgctl;
|
||
|
dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr;
|
||
|
volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
|
||
|
|
||
|
gotgctl.d32 = dwc_read_reg32(addr);
|
||
|
|
||
|
core_if->srp_timer_started = 0;
|
||
|
|
||
|
if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
|
||
|
(core_if->core_params->i2c_enable)) {
|
||
|
DWC_PRINT("SRP Timeout\n");
|
||
|
|
||
|
if ((core_if->srp_success) &&
|
||
|
(gotgctl.b.bsesvld)) {
|
||
|
if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
|
||
|
core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
|
||
|
}
|
||
|
|
||
|
/* Clear Session Request */
|
||
|
gotgctl.d32 = 0;
|
||
|
gotgctl.b.sesreq = 1;
|
||
|
dwc_modify_reg32(&core_if->core_global_regs->gotgctl,
|
||
|
gotgctl.d32, 0);
|
||
|
|
||
|
core_if->srp_success = 0;
|
||
|
}
|
||
|
else {
|
||
|
DWC_ERROR("Device not connected/responding\n");
|
||
|
gotgctl.b.sesreq = 0;
|
||
|
dwc_write_reg32(addr, gotgctl.d32);
|
||
|
}
|
||
|
}
|
||
|
else if (gotgctl.b.sesreq) {
|
||
|
DWC_PRINT("SRP Timeout\n");
|
||
|
|
||
|
DWC_ERROR("Device not connected/responding\n");
|
||
|
gotgctl.b.sesreq = 0;
|
||
|
dwc_write_reg32(addr, gotgctl.d32);
|
||
|
}
|
||
|
else {
|
||
|
DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* Start the SRP timer to detect when the SRP does not complete within
|
||
|
* 6 seconds.
|
||
|
*
|
||
|
* @param pcd the pcd structure.
|
||
|
*/
|
||
|
void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd)
|
||
|
{
|
||
|
struct timer_list *srp_timer = &pcd->srp_timer;
|
||
|
GET_CORE_IF(pcd)->srp_timer_started = 1;
|
||
|
init_timer(srp_timer);
|
||
|
srp_timer->function = srp_timeout;
|
||
|
srp_timer->data = (unsigned long)GET_CORE_IF(pcd);
|
||
|
srp_timer->expires = jiffies + (HZ*6);
|
||
|
add_timer(srp_timer);
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* Tasklet
|
||
|
*
|
||
|
*/
|
||
|
extern void start_next_request(dwc_otg_pcd_ep_t *ep);
|
||
|
|
||
|
static void start_xfer_tasklet_func (unsigned long data)
|
||
|
{
|
||
|
dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data;
|
||
|
dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if;
|
||
|
|
||
|
int i;
|
||
|
depctl_data_t diepctl;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
|
||
|
|
||
|
diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl);
|
||
|
|
||
|
if (pcd->ep0.queue_sof) {
|
||
|
pcd->ep0.queue_sof = 0;
|
||
|
start_next_request (&pcd->ep0);
|
||
|
// break;
|
||
|
}
|
||
|
|
||
|
for (i=0; i<core_if->dev_if->num_in_eps; i++)
|
||
|
{
|
||
|
depctl_data_t diepctl;
|
||
|
diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl);
|
||
|
|
||
|
if (pcd->in_ep[i].queue_sof) {
|
||
|
pcd->in_ep[i].queue_sof = 0;
|
||
|
start_next_request (&pcd->in_ep[i]);
|
||
|
// break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
return;
|
||
|
}
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
|
||
|
static struct tasklet_struct start_xfer_tasklet = {
|
||
|
.next = NULL,
|
||
|
.state = 0,
|
||
|
.count = ATOMIC_INIT(0),
|
||
|
.func = start_xfer_tasklet_func,
|
||
|
.data = 0,
|
||
|
};
|
||
|
/**
|
||
|
* This function initialized the pcd Dp structures to there default
|
||
|
* state.
|
||
|
*
|
||
|
* @param pcd the pcd structure.
|
||
|
*/
|
||
|
void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd)
|
||
|
{
|
||
|
static const char * names[] =
|
||
|
{
|
||
|
|
||
|
"ep0",
|
||
|
"ep1in",
|
||
|
"ep2in",
|
||
|
"ep3in",
|
||
|
"ep4in",
|
||
|
"ep5in",
|
||
|
"ep6in",
|
||
|
"ep7in",
|
||
|
"ep8in",
|
||
|
"ep9in",
|
||
|
"ep10in",
|
||
|
"ep11in",
|
||
|
"ep12in",
|
||
|
"ep13in",
|
||
|
"ep14in",
|
||
|
"ep15in",
|
||
|
"ep1out",
|
||
|
"ep2out",
|
||
|
"ep3out",
|
||
|
"ep4out",
|
||
|
"ep5out",
|
||
|
"ep6out",
|
||
|
"ep7out",
|
||
|
"ep8out",
|
||
|
"ep9out",
|
||
|
"ep10out",
|
||
|
"ep11out",
|
||
|
"ep12out",
|
||
|
"ep13out",
|
||
|
"ep14out",
|
||
|
"ep15out"
|
||
|
|
||
|
};
|
||
|
|
||
|
int i;
|
||
|
int in_ep_cntr, out_ep_cntr;
|
||
|
uint32_t hwcfg1;
|
||
|
uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
|
||
|
uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
|
||
|
dwc_otg_pcd_ep_t *ep;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
|
||
|
|
||
|
INIT_LIST_HEAD (&pcd->gadget.ep_list);
|
||
|
pcd->gadget.ep0 = &pcd->ep0.ep;
|
||
|
pcd->gadget.speed = USB_SPEED_UNKNOWN;
|
||
|
|
||
|
INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list);
|
||
|
|
||
|
/**
|
||
|
* Initialize the EP0 structure.
|
||
|
*/
|
||
|
ep = &pcd->ep0;
|
||
|
|
||
|
/* Init EP structure */
|
||
|
ep->desc = 0;
|
||
|
ep->pcd = pcd;
|
||
|
ep->stopped = 1;
|
||
|
|
||
|
/* Init DWC ep structure */
|
||
|
ep->dwc_ep.num = 0;
|
||
|
ep->dwc_ep.active = 0;
|
||
|
ep->dwc_ep.tx_fifo_num = 0;
|
||
|
/* Control until ep is actvated */
|
||
|
ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
|
||
|
ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
|
||
|
ep->dwc_ep.dma_addr = 0;
|
||
|
ep->dwc_ep.start_xfer_buff = 0;
|
||
|
ep->dwc_ep.xfer_buff = 0;
|
||
|
ep->dwc_ep.xfer_len = 0;
|
||
|
ep->dwc_ep.xfer_count = 0;
|
||
|
ep->dwc_ep.sent_zlp = 0;
|
||
|
ep->dwc_ep.total_len = 0;
|
||
|
ep->queue_sof = 0;
|
||
|
ep->dwc_ep.desc_addr = 0;
|
||
|
ep->dwc_ep.dma_desc_addr = 0;
|
||
|
|
||
|
ep->dwc_ep.aligned_buf=NULL;
|
||
|
ep->dwc_ep.aligned_buf_size=0;
|
||
|
ep->dwc_ep.aligned_dma_addr=0;
|
||
|
|
||
|
|
||
|
/* Init the usb_ep structure. */
|
||
|
ep->ep.name = names[0];
|
||
|
ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
|
||
|
|
||
|
/**
|
||
|
* @todo NGS: What should the max packet size be set to
|
||
|
* here? Before EP type is set?
|
||
|
*/
|
||
|
ep->ep.maxpacket = MAX_PACKET_SIZE;
|
||
|
|
||
|
list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
|
||
|
|
||
|
INIT_LIST_HEAD (&ep->queue);
|
||
|
/**
|
||
|
* Initialize the EP structures.
|
||
|
*/
|
||
|
in_ep_cntr = 0;
|
||
|
hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
|
||
|
|
||
|
for (i = 1; in_ep_cntr < num_in_eps; i++)
|
||
|
{
|
||
|
if((hwcfg1 & 0x1) == 0) {
|
||
|
dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
|
||
|
in_ep_cntr ++;
|
||
|
|
||
|
/* Init EP structure */
|
||
|
ep->desc = 0;
|
||
|
ep->pcd = pcd;
|
||
|
ep->stopped = 1;
|
||
|
|
||
|
/* Init DWC ep structure */
|
||
|
ep->dwc_ep.is_in = 1;
|
||
|
ep->dwc_ep.num = i;
|
||
|
ep->dwc_ep.active = 0;
|
||
|
ep->dwc_ep.tx_fifo_num = 0;
|
||
|
|
||
|
/* Control until ep is actvated */
|
||
|
ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
|
||
|
ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
|
||
|
ep->dwc_ep.dma_addr = 0;
|
||
|
ep->dwc_ep.start_xfer_buff = 0;
|
||
|
ep->dwc_ep.xfer_buff = 0;
|
||
|
ep->dwc_ep.xfer_len = 0;
|
||
|
ep->dwc_ep.xfer_count = 0;
|
||
|
ep->dwc_ep.sent_zlp = 0;
|
||
|
ep->dwc_ep.total_len = 0;
|
||
|
ep->queue_sof = 0;
|
||
|
ep->dwc_ep.desc_addr = 0;
|
||
|
ep->dwc_ep.dma_desc_addr = 0;
|
||
|
|
||
|
/* Init the usb_ep structure. */
|
||
|
ep->ep.name = names[i];
|
||
|
ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
|
||
|
|
||
|
/**
|
||
|
* @todo NGS: What should the max packet size be set to
|
||
|
* here? Before EP type is set?
|
||
|
*/
|
||
|
ep->ep.maxpacket = MAX_PACKET_SIZE;
|
||
|
|
||
|
//add only even number ep as in
|
||
|
if((i%2)==1)
|
||
|
list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
|
||
|
|
||
|
INIT_LIST_HEAD (&ep->queue);
|
||
|
}
|
||
|
hwcfg1 >>= 2;
|
||
|
}
|
||
|
|
||
|
out_ep_cntr = 0;
|
||
|
hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
|
||
|
|
||
|
for (i = 1; out_ep_cntr < num_out_eps; i++)
|
||
|
{
|
||
|
if((hwcfg1 & 0x1) == 0) {
|
||
|
dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
|
||
|
out_ep_cntr++;
|
||
|
|
||
|
/* Init EP structure */
|
||
|
ep->desc = 0;
|
||
|
ep->pcd = pcd;
|
||
|
ep->stopped = 1;
|
||
|
|
||
|
/* Init DWC ep structure */
|
||
|
ep->dwc_ep.is_in = 0;
|
||
|
ep->dwc_ep.num = i;
|
||
|
ep->dwc_ep.active = 0;
|
||
|
ep->dwc_ep.tx_fifo_num = 0;
|
||
|
/* Control until ep is actvated */
|
||
|
ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
|
||
|
ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
|
||
|
ep->dwc_ep.dma_addr = 0;
|
||
|
ep->dwc_ep.start_xfer_buff = 0;
|
||
|
ep->dwc_ep.xfer_buff = 0;
|
||
|
ep->dwc_ep.xfer_len = 0;
|
||
|
ep->dwc_ep.xfer_count = 0;
|
||
|
ep->dwc_ep.sent_zlp = 0;
|
||
|
ep->dwc_ep.total_len = 0;
|
||
|
ep->queue_sof = 0;
|
||
|
|
||
|
/* Init the usb_ep structure. */
|
||
|
ep->ep.name = names[15 + i];
|
||
|
ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops;
|
||
|
/**
|
||
|
* @todo NGS: What should the max packet size be set to
|
||
|
* here? Before EP type is set?
|
||
|
*/
|
||
|
ep->ep.maxpacket = MAX_PACKET_SIZE;
|
||
|
|
||
|
//add only odd number ep as out
|
||
|
if((i%2)==0)
|
||
|
list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list);
|
||
|
|
||
|
INIT_LIST_HEAD (&ep->queue);
|
||
|
}
|
||
|
hwcfg1 >>= 2;
|
||
|
}
|
||
|
|
||
|
/* remove ep0 from the list. There is a ep0 pointer.*/
|
||
|
list_del_init (&pcd->ep0.ep.ep_list);
|
||
|
|
||
|
pcd->ep0state = EP0_DISCONNECT;
|
||
|
pcd->ep0.ep.maxpacket = MAX_EP0_SIZE;
|
||
|
pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
|
||
|
pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* This function releases the Gadget device.
|
||
|
* required by device_unregister().
|
||
|
*
|
||
|
* @todo Should this do something? Should it free the PCD?
|
||
|
*/
|
||
|
static void dwc_otg_pcd_gadget_release(struct device *dev)
|
||
|
{
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev);
|
||
|
}
|
||
|
|
||
|
|
||
|
|
||
|
/**
|
||
|
* This function initialized the PCD portion of the driver.
|
||
|
*
|
||
|
*/
|
||
|
u8 dev_id[]="gadget";
|
||
|
int dwc_otg_pcd_init(struct platform_device *pdev)
|
||
|
{
|
||
|
static char pcd_name[] = "dwc_otg_pcd";
|
||
|
dwc_otg_pcd_t *pcd;
|
||
|
dwc_otg_core_if_t* core_if;
|
||
|
dwc_otg_dev_if_t* dev_if;
|
||
|
dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
|
||
|
int retval = 0;
|
||
|
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, pdev);
|
||
|
/*
|
||
|
* Allocate PCD structure
|
||
|
*/
|
||
|
pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL);
|
||
|
|
||
|
if (pcd == 0) {
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
memset(pcd, 0, sizeof(dwc_otg_pcd_t));
|
||
|
spin_lock_init(&pcd->lock);
|
||
|
|
||
|
otg_dev->pcd = pcd;
|
||
|
s_pcd = pcd;
|
||
|
pcd->gadget.name = pcd_name;
|
||
|
|
||
|
pcd->gadget.dev.init_name = dev_id;
|
||
|
pcd->otg_dev = platform_get_drvdata(pdev);
|
||
|
|
||
|
pcd->gadget.dev.parent = &pdev->dev;
|
||
|
pcd->gadget.dev.release = dwc_otg_pcd_gadget_release;
|
||
|
pcd->gadget.ops = &dwc_otg_pcd_ops;
|
||
|
|
||
|
core_if = GET_CORE_IF(pcd);
|
||
|
dev_if = core_if->dev_if;
|
||
|
|
||
|
if(core_if->hwcfg4.b.ded_fifo_en) {
|
||
|
DWC_PRINT("Dedicated Tx FIFOs mode\n");
|
||
|
}
|
||
|
else {
|
||
|
DWC_PRINT("Shared Tx FIFO mode\n");
|
||
|
}
|
||
|
|
||
|
/* If the module is set to FS or if the PHY_TYPE is FS then the gadget
|
||
|
* should not report as dual-speed capable. replace the following line
|
||
|
* with the block of code below it once the software is debugged for
|
||
|
* this. If is_dualspeed = 0 then the gadget driver should not report
|
||
|
* a device qualifier descriptor when queried. */
|
||
|
if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) ||
|
||
|
((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) &&
|
||
|
(GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) &&
|
||
|
(GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) {
|
||
|
pcd->gadget.max_speed = USB_SPEED_FULL;
|
||
|
}
|
||
|
else {
|
||
|
pcd->gadget.max_speed = USB_SPEED_HIGH;
|
||
|
}
|
||
|
|
||
|
if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) ||
|
||
|
(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) ||
|
||
|
(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
|
||
|
(otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
|
||
|
pcd->gadget.is_otg = 0;
|
||
|
}
|
||
|
else {
|
||
|
pcd->gadget.is_otg = 1;
|
||
|
}
|
||
|
|
||
|
|
||
|
pcd->driver = 0;
|
||
|
/* Register the gadget device */
|
||
|
printk("%s: 1\n",__func__);
|
||
|
retval = device_register(&pcd->gadget.dev);
|
||
|
if (retval != 0) {
|
||
|
kfree (pcd);
|
||
|
printk("%s: 2\n",__func__);
|
||
|
return retval;
|
||
|
}
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Initialized the Core for Device mode.
|
||
|
*/
|
||
|
if (dwc_otg_is_device_mode(core_if)) {
|
||
|
dwc_otg_core_dev_init(core_if);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Initialize EP structures
|
||
|
*/
|
||
|
dwc_otg_pcd_reinit(pcd);
|
||
|
|
||
|
/*
|
||
|
* Register the PCD Callbacks.
|
||
|
*/
|
||
|
dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks,
|
||
|
pcd);
|
||
|
/*
|
||
|
* Setup interupt handler
|
||
|
*/
|
||
|
DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq);
|
||
|
retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq,
|
||
|
IRQF_SHARED, pcd->gadget.name, pcd);
|
||
|
if (retval != 0) {
|
||
|
DWC_ERROR("request of irq%d failed\n", otg_dev->irq);
|
||
|
device_unregister(&pcd->gadget.dev);
|
||
|
kfree (pcd);
|
||
|
return -EBUSY;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Initialize the DMA buffer for SETUP packets
|
||
|
*/
|
||
|
if (GET_CORE_IF(pcd)->dma_enable) {
|
||
|
pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0);
|
||
|
if (pcd->setup_pkt == 0) {
|
||
|
free_irq(otg_dev->irq, pcd);
|
||
|
device_unregister(&pcd->gadget.dev);
|
||
|
kfree (pcd);
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0);
|
||
|
if (pcd->status_buf == 0) {
|
||
|
dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
|
||
|
free_irq(otg_dev->irq, pcd);
|
||
|
device_unregister(&pcd->gadget.dev);
|
||
|
kfree (pcd);
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
if (GET_CORE_IF(pcd)->dma_desc_enable) {
|
||
|
dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1);
|
||
|
dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1);
|
||
|
dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1);
|
||
|
dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1);
|
||
|
|
||
|
if(dev_if->setup_desc_addr[0] == 0
|
||
|
|| dev_if->setup_desc_addr[1] == 0
|
||
|
|| dev_if->in_desc_addr == 0
|
||
|
|| dev_if->out_desc_addr == 0 ) {
|
||
|
|
||
|
if(dev_if->out_desc_addr)
|
||
|
dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
|
||
|
if(dev_if->in_desc_addr)
|
||
|
dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
|
||
|
if(dev_if->setup_desc_addr[1])
|
||
|
dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
|
||
|
if(dev_if->setup_desc_addr[0])
|
||
|
dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
|
||
|
|
||
|
|
||
|
dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle);
|
||
|
dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle);
|
||
|
|
||
|
free_irq(otg_dev->irq, pcd);
|
||
|
device_unregister(&pcd->gadget.dev);
|
||
|
kfree (pcd);
|
||
|
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
}
|
||
|
}
|
||
|
else {
|
||
|
pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL);
|
||
|
if (pcd->setup_pkt == 0) {
|
||
|
free_irq(otg_dev->irq, pcd);
|
||
|
device_unregister(&pcd->gadget.dev);
|
||
|
kfree (pcd);
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
|
||
|
pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL);
|
||
|
if (pcd->status_buf == 0) {
|
||
|
kfree(pcd->setup_pkt);
|
||
|
free_irq(otg_dev->irq, pcd);
|
||
|
device_unregister(&pcd->gadget.dev);
|
||
|
kfree (pcd);
|
||
|
return -ENOMEM;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
|
||
|
/* Initialize tasklet */
|
||
|
start_xfer_tasklet.data = (unsigned long)pcd;
|
||
|
pcd->start_xfer_tasklet = &start_xfer_tasklet;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/**
|
||
|
* Cleanup the PCD.
|
||
|
*/
|
||
|
void dwc_otg_pcd_remove(struct platform_device *pdev)
|
||
|
{
|
||
|
dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev);
|
||
|
dwc_otg_pcd_t *pcd = otg_dev->pcd;
|
||
|
dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if;
|
||
|
|
||
|
DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pdev);
|
||
|
|
||
|
/*
|
||
|
* Free the IRQ
|
||
|
*/
|
||
|
free_irq(otg_dev->irq, pcd);
|
||
|
|
||
|
/* start with the driver above us */
|
||
|
if (pcd->driver) {
|
||
|
/* should have been done already by driver model core */
|
||
|
DWC_WARN("driver '%s' is still registered\n",
|
||
|
pcd->driver->driver.name);
|
||
|
usb_gadget_unregister_driver(pcd->driver);
|
||
|
}
|
||
|
device_unregister(&pcd->gadget.dev);
|
||
|
|
||
|
if (GET_CORE_IF(pcd)->dma_enable) {
|
||
|
dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle);
|
||
|
dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle);
|
||
|
if (GET_CORE_IF(pcd)->dma_desc_enable) {
|
||
|
dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1);
|
||
|
dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1);
|
||
|
dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1);
|
||
|
dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1);
|
||
|
}
|
||
|
}
|
||
|
else {
|
||
|
kfree (pcd->setup_pkt);
|
||
|
kfree (pcd->status_buf);
|
||
|
}
|
||
|
|
||
|
kfree(pcd);
|
||
|
otg_dev->pcd = 0;
|
||
|
}
|
||
|
|
||
|
#endif /* DWC_HOST_ONLY */
|