openwrt-xburst/package/madwifi/patches/383-ibss_hostap.patch

--- a/ath/if_ath.c
+++ b/ath/if_ath.c
@@ -1452,6 +1452,23 @@ ath_vap_create(struct ieee80211com *ic, 
 		sc->sc_nstavaps++;
 	else if (opmode == IEEE80211_M_MONITOR)
 		sc->sc_nmonvaps++;
+
+
+	/* Driving the HAL in IBSS sometimes adapts the TSF and other timing registers
+	 * from received beacons/probes. If that happens, expected TX interrupts may
+	 * not occur until next reset. Which triggers the "lost beacon" tasklet.
+	 * Resulting effectively in not sending packets for minutes. Because that only
+	 * happens in large mesh networks, this mode needs to be activated by a kernel
+	 * module parameter: hostap_for_ibss=1. Note that using this mode has side
+	 * effects. Such as not supressing beacons/probe answers randomly when
+	 * receiving other node beacons. It's recommended to lower the beacon interval
+	 * then. When using an IBSS-VAP together with an HOSTAP-VAP, you may also need
+	 * to re-trigger IBSS beacon generation after creating the HOSTAP-VAP by
+	 * issueing "iwpriv athX bintval 1000".
+	 */
+	if ((flags & IEEE80211_NO_STABEACONS) && (ic->ic_opmode == IEEE80211_M_IBSS))
+		sc->sc_opmode = HAL_M_HOSTAP;
+	else
 	/*
 	 * Adhoc demo mode is a pseudo mode; to the HAL it's
 	 * just IBSS mode and the driver doesn't use management
@@ -4279,7 +4296,8 @@ ath_calcrxfilter(struct ath_softc *sc)
 	if (ic->ic_opmode != IEEE80211_M_HOSTAP && (dev->flags & IFF_PROMISC))
 		rfilt |= HAL_RX_FILTER_PROM;
 	if (ic->ic_opmode == IEEE80211_M_STA ||
-	    sc->sc_opmode == HAL_M_IBSS ||	/* NB: AHDEMO too */
+	    ic->ic_opmode == IEEE80211_M_IBSS ||
+	    ic->ic_opmode == IEEE80211_M_AHDEMO ||
 	    (sc->sc_nostabeacons) || sc->sc_scanning ||
 		(ic->ic_opmode == IEEE80211_M_HOSTAP))
 		rfilt |= HAL_RX_FILTER_BEACON;
@@ -6435,6 +6453,33 @@ ath_capture(struct net_device *dev, cons
 }
 
 /*
+ * Advances (forwards/adds) a microsecond value to current chip's TSF registers
+ */
+
+/* from ath_info.c */
+#define AR5K_TSF_L32_5210		0x806c	/* TSF (lower 32 bits) */
+#define AR5K_TSF_L32_5211		0x804c
+#define AR5K_TSF_L32			(ar_device(ah->ah_sc->devid) == 5210 ? \
+					AR5K_TSF_L32_5210 : AR5K_TSF_L32_5211)
+
+#define AR5K_TSF_U32_5210		0x8070
+#define AR5K_TSF_U32_5211		0x8050
+#define AR5K_TSF_U32			(ar_device(ah->ah_sc->devid) == 5210 ? \
+					AR5K_TSF_U32_5210 : AR5K_TSF_U32_5211)
+
+static inline void ath_hal_settsf64(struct ath_hal *ah, u_int64_t tsf_adv)
+{
+	ATH_HAL_LOCK_IRQ(ah->ah_sc);
+	ath_hal_set_function(__func__);
+	tsf_adv += ah->ah_getTsf64(ah);
+	OS_REG_WRITE(ah, AR5K_TSF_L32, 0ll);
+	OS_REG_WRITE(ah, AR5K_TSF_U32, (tsf_adv >> 32) & 0xffffffffll);
+	OS_REG_WRITE(ah, AR5K_TSF_L32, (tsf_adv >> 00) & 0xffffffffll);
+	ath_hal_set_function(NULL);
+	ATH_HAL_UNLOCK_IRQ(ah->ah_sc);
+}
+
+/*
  * Intercept management frames to collect beacon RSSI data and to do
  * ibss merges. This function is called for all management frames,
  * including those belonging to other BSS.
@@ -6487,10 +6532,19 @@ ath_recv_mgmt(struct ieee80211vap * vap,
 			DPRINTF(sc, ATH_DEBUG_BEACON, 
 				"Updated beacon timers\n");
 		}
-		if ((sc->sc_opmode == HAL_M_IBSS) &&
-				IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid) &&
-				ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval)) {
-			DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
+		if ((vap->iv_opmode == IEEE80211_M_IBSS) &&
+				(sc->sc_opmode == HAL_M_HOSTAP) &&
+				IEEE80211_ADDR_EQ(ni->ni_bssid, vap->iv_bss->ni_bssid)) {
+			/* In this mode, we drive the HAL in HOSTAP mode. Hence
+			 * we do the IBSS merging in software. Also do not merge
+			 * if the difference it too small. Otherwise we are playing
+			 * tsf-pingpong with other vendors drivers */
+			beacon_tsf = le64_to_cpu(ni->ni_tstamp.tsf);
+			if (beacon_tsf > rtsf + 0xffff) {
+				ath_hal_settsf64(sc->sc_ah, beacon_tsf - rtsf);
+				ieee80211_ibss_merge(ni);
+			}
+			break;
 		}
 		/* NB: Fall Through */
 	case IEEE80211_FC0_SUBTYPE_PROBE_RESP:
@@ -6563,6 +6617,10 @@ ath_recv_mgmt(struct ieee80211vap * vap,
 #endif
 			if (do_merge)
 				ieee80211_ibss_merge(ni);
+
+			if ((sc->sc_opmode == HAL_M_IBSS) &&
+					ath_hw_check_atim(sc, 1, vap->iv_bss->ni_intval))
+				DPRINTF(sc, ATH_DEBUG_ANY, "Fixed ATIM window after beacon recv\n");
 		}
 		break;
 	}