openwrt-xburst/target/linux/lantiq/patches-3.2/0043-NET-adds-driver-for-lantiq-vr9-ethernet.patch

From 7591c5702cfe842f415e42f387532fe71ea3640f Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Fri, 9 Mar 2012 19:03:40 +0100
Subject: [PATCH 43/70] NET: adds driver for lantiq vr9 ethernet

---
 .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h |    2 +-
 arch/mips/lantiq/xway/devices.c                    |   20 +
 arch/mips/lantiq/xway/devices.h                    |    1 +
 drivers/net/ethernet/Kconfig                       |    6 +
 drivers/net/ethernet/Makefile                      |    1 +
 drivers/net/ethernet/lantiq_vrx200.c               | 1358 ++++++++++++++++++++
 6 files changed, 1387 insertions(+), 1 deletions(-)
 create mode 100644 drivers/net/ethernet/lantiq_vrx200.c

--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
@@ -102,7 +102,7 @@
 
 /* GBIT - gigabit switch */
 #define LTQ_GBIT_BASE_ADDR	0x1E108000
-#define LTQ_GBIT_SIZE		0x200
+#define LTQ_GBIT_SIZE		0x4000
 
 /* DMA */
 #define LTQ_DMA_BASE_ADDR	0x1E104100
--- a/arch/mips/lantiq/xway/devices.c
+++ b/arch/mips/lantiq/xway/devices.c
@@ -83,6 +83,7 @@ static struct platform_device ltq_etop =
 	.name		= "ltq_etop",
 	.resource	= ltq_etop_resources,
 	.num_resources	= 1,
+	.id		= -1,
 };
 
 void __init
@@ -96,3 +97,22 @@ ltq_register_etop(struct ltq_eth_data *e
 		platform_device_register(&ltq_etop);
 	}
 }
+
+/* ethernet */
+static struct resource ltq_vrx200_resources[] = {
+	MEM_RES("gbit", LTQ_GBIT_BASE_ADDR, LTQ_GBIT_SIZE),
+};
+
+static struct platform_device ltq_vrx200 = {
+	.name		= "ltq_vrx200",
+	.resource	= ltq_vrx200_resources,
+	.num_resources	= 1,
+	.id = -1,
+};
+
+void __init
+ltq_register_vrx200(struct ltq_eth_data *eth)
+{
+	ltq_vrx200.dev.platform_data = eth;
+	platform_device_register(&ltq_vrx200);
+}
--- a/arch/mips/lantiq/xway/devices.h
+++ b/arch/mips/lantiq/xway/devices.h
@@ -17,5 +17,6 @@ extern void ltq_register_gpio_stp(void);
 extern void ltq_register_ase_asc(void);
 extern void ltq_register_etop(struct ltq_eth_data *eth);
 extern void xway_register_nand(struct mtd_partition *parts, int count);
+extern void ltq_register_vrx200(struct ltq_eth_data *eth);
 
 #endif
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -84,6 +84,12 @@ config LANTIQ_ETOP
 	---help---
 	  Support for the MII0 inside the Lantiq SoC
 
+config LANTIQ_VRX200
+	tristate "Lantiq SoC vrx200 driver"
+	depends on SOC_TYPE_XWAY
+	---help---
+	  Support for the MII0 inside the Lantiq SoC
+
 source "drivers/net/ethernet/marvell/Kconfig"
 source "drivers/net/ethernet/mellanox/Kconfig"
 source "drivers/net/ethernet/micrel/Kconfig"
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_IP1000) += icplus/
 obj-$(CONFIG_JME) += jme.o
 obj-$(CONFIG_KORINA) += korina.o
 obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
+obj-$(CONFIG_LANTIQ_VRX200) += lantiq_vrx200.o
 obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
 obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
 obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
--- /dev/null
+++ b/drivers/net/ethernet/lantiq_vrx200.c
@@ -0,0 +1,1358 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify it
+ *   under the terms of the GNU General Public License version 2 as published
+ *   by the Free Software Foundation.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2011 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/uaccess.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/phy.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#include <asm/checksum.h>
+
+#include <lantiq_soc.h>
+#include <xway_dma.h>
+#include <lantiq_platform.h>
+
+#define LTQ_SWITCH_BASE                 0x1E108000
+#define LTQ_SWITCH_CORE_BASE            LTQ_SWITCH_BASE
+#define LTQ_SWITCH_TOP_PDI_BASE         LTQ_SWITCH_CORE_BASE
+#define LTQ_SWITCH_BM_PDI_BASE          (LTQ_SWITCH_CORE_BASE + 4 * 0x40)
+#define LTQ_SWITCH_MAC_PDI_0_BASE       (LTQ_SWITCH_CORE_BASE + 4 * 0x900)
+#define LTQ_SWITCH_MAC_PDI_X_BASE(x)    (LTQ_SWITCH_MAC_PDI_0_BASE + x * 0x30)
+#define LTQ_SWITCH_TOPLEVEL_BASE        (LTQ_SWITCH_BASE + 4 * 0xC40)
+#define LTQ_SWITCH_MDIO_PDI_BASE        (LTQ_SWITCH_TOPLEVEL_BASE)
+#define LTQ_SWITCH_MII_PDI_BASE         (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x36)
+#define LTQ_SWITCH_PMAC_PDI_BASE        (LTQ_SWITCH_TOPLEVEL_BASE + 4 * 0x82)
+
+#define LTQ_ETHSW_MAC_CTRL0_PADEN               (1 << 8)
+#define LTQ_ETHSW_MAC_CTRL0_FCS                 (1 << 7)
+#define LTQ_ETHSW_MAC_CTRL1_SHORTPRE            (1 << 8)
+#define LTQ_ETHSW_MAC_CTRL2_MLEN                (1 << 3)
+#define LTQ_ETHSW_MAC_CTRL2_LCHKL               (1 << 2)
+#define LTQ_ETHSW_MAC_CTRL2_LCHKS_DIS           0
+#define LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG         1
+#define LTQ_ETHSW_MAC_CTRL2_LCHKS_TAG           2
+#define LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT   9
+#define LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS        (1 << 6)
+#define LTQ_ETHSW_GLOB_CTRL_SE                  (1 << 15)
+#define LTQ_ETHSW_MDC_CFG1_MCEN                 (1 << 8)
+#define LTQ_ETHSW_PMAC_HD_CTL_FC                (1 << 10)
+#define LTQ_ETHSW_PMAC_HD_CTL_RC                (1 << 4)
+#define LTQ_ETHSW_PMAC_HD_CTL_AC                (1 << 2)
+#define ADVERTIZE_MPD          (1 << 10)
+
+#define MDIO_DEVAD_NONE                    (-1)
+
+#define LTQ_ETH_RX_BUFFER_CNT           PKTBUFSRX
+
+#define LTQ_MDIO_DRV_NAME               "ltq-mdio"
+#define LTQ_ETH_DRV_NAME                "ltq-eth"
+
+#define LTQ_ETHSW_MAX_GMAC              1
+#define LTQ_ETHSW_PMAC                  1
+
+#define ltq_setbits(a, set) \
+        ltq_w32(ltq_r32(a) | (set), a)
+
+enum ltq_reset_modules {
+	LTQ_RESET_CORE,
+	LTQ_RESET_DMA,
+	LTQ_RESET_ETH,
+	LTQ_RESET_PHY,
+	LTQ_RESET_HARD,
+	LTQ_RESET_SOFT,
+};
+
+static inline void
+dbg_ltq_writel(void *a, unsigned int b)
+{
+	ltq_w32(b, a);
+}
+
+int ltq_reset_once(enum ltq_reset_modules module, ulong usec);
+
+struct ltq_ethsw_mac_pdi_x_regs {
+	u32     pstat;          /* Port status */
+	u32     pisr;           /* Interrupt status */
+	u32     pier;           /* Interrupt enable */
+	u32     ctrl_0;         /* Control 0 */
+	u32     ctrl_1;         /* Control 1 */
+	u32     ctrl_2;         /* Control 2 */
+	u32     ctrl_3;         /* Control 3 */
+	u32     ctrl_4;         /* Control 4 */
+	u32     ctrl_5;         /* Control 5 */
+	u32     ctrl_6;         /* Control 6 */
+	u32     bufst;          /* TX/RX buffer control */
+	u32     testen;         /* Test enable */
+};
+
+struct ltq_ethsw_mac_pdi_regs {
+	struct ltq_ethsw_mac_pdi_x_regs mac[12];
+};
+
+struct ltq_ethsw_mdio_pdi_regs {
+	u32     glob_ctrl;      /* Global control 0 */
+	u32     rsvd0[7];
+	u32     mdio_ctrl;      /* MDIO control */
+	u32     mdio_read;      /* MDIO read data */
+	u32     mdio_write;     /* MDIO write data */
+	u32     mdc_cfg_0;      /* MDC clock configuration 0 */
+	u32     mdc_cfg_1;      /* MDC clock configuration 1 */
+	u32     rsvd[3];
+	u32     phy_addr_5;     /* PHY address port 5 */
+	u32     phy_addr_4;     /* PHY address port 4 */
+	u32     phy_addr_3;     /* PHY address port 3 */
+	u32     phy_addr_2;     /* PHY address port 2 */
+	u32     phy_addr_1;     /* PHY address port 1 */
+	u32     phy_addr_0;     /* PHY address port 0 */
+	u32     mdio_stat_0;    /* MDIO PHY polling status port 0 */
+	u32     mdio_stat_1;    /* MDIO PHY polling status port 1 */
+	u32     mdio_stat_2;    /* MDIO PHY polling status port 2 */
+	u32     mdio_stat_3;    /* MDIO PHY polling status port 3 */
+	u32     mdio_stat_4;    /* MDIO PHY polling status port 4 */
+	u32     mdio_stat_5;    /* MDIO PHY polling status port 5 */
+};
+
+struct ltq_ethsw_mii_pdi_regs {
+	u32     mii_cfg0;       /* xMII port 0 configuration */
+	u32     pcdu0;          /* Port 0 clock delay configuration */
+	u32     mii_cfg1;       /* xMII port 1 configuration */
+	u32     pcdu1;          /* Port 1 clock delay configuration */
+	u32     mii_cfg2;       /* xMII port 2 configuration */
+	u32     rsvd0;
+	u32     mii_cfg3;       /* xMII port 3 configuration */
+	u32     rsvd1;
+	u32     mii_cfg4;       /* xMII port 4 configuration */
+	u32     rsvd2;
+	u32     mii_cfg5;       /* xMII port 5 configuration */
+	u32     pcdu5;          /* Port 5 clock delay configuration */
+};
+
+struct ltq_ethsw_pmac_pdi_regs {
+	u32     hd_ctl;         /* PMAC header control */
+	u32     tl;             /* PMAC type/length */
+	u32     sa1;            /* PMAC source address 1 */
+	u32     sa2;            /* PMAC source address 2 */
+	u32     sa3;            /* PMAC source address 3 */
+	u32     da1;            /* PMAC destination address 1 */
+	u32     da2;            /* PMAC destination address 2 */
+	u32     da3;            /* PMAC destination address 3 */
+	u32     vlan;           /* PMAC VLAN */
+	u32     rx_ipg;         /* PMAC interpacket gap in RX direction */
+	u32     st_etype;       /* PMAC special tag ethertype */
+	u32     ewan;           /* PMAC ethernet WAN group */
+};
+
+struct ltq_mdio_phy_addr_reg {
+	union {
+		struct {
+			unsigned rsvd:1;
+			unsigned lnkst:2;       /* Link status control */
+			unsigned speed:2;       /* Speed control */
+			unsigned fdup:2;        /* Full duplex control */
+			unsigned fcontx:2;      /* Flow control mode TX */
+			unsigned fconrx:2;      /* Flow control mode RX */
+			unsigned addr:5;        /* PHY address */
+		} bits;
+		u16 val;
+	};
+};
+
+enum ltq_mdio_phy_addr_lnkst {
+	LTQ_MDIO_PHY_ADDR_LNKST_AUTO = 0,
+	LTQ_MDIO_PHY_ADDR_LNKST_UP = 1,
+	LTQ_MDIO_PHY_ADDR_LNKST_DOWN = 2,
+};
+
+enum ltq_mdio_phy_addr_speed {
+	LTQ_MDIO_PHY_ADDR_SPEED_M10 = 0,
+	LTQ_MDIO_PHY_ADDR_SPEED_M100 = 1,
+	LTQ_MDIO_PHY_ADDR_SPEED_G1 = 2,
+	LTQ_MDIO_PHY_ADDR_SPEED_AUTO = 3,
+};
+
+enum ltq_mdio_phy_addr_fdup {
+	LTQ_MDIO_PHY_ADDR_FDUP_AUTO = 0,
+	LTQ_MDIO_PHY_ADDR_FDUP_ENABLE = 1,
+	LTQ_MDIO_PHY_ADDR_FDUP_DISABLE = 3,
+};
+
+enum ltq_mdio_phy_addr_fcon {
+	LTQ_MDIO_PHY_ADDR_FCON_AUTO = 0,
+	LTQ_MDIO_PHY_ADDR_FCON_ENABLE = 1,
+	LTQ_MDIO_PHY_ADDR_FCON_DISABLE = 3,
+};
+
+struct ltq_mii_mii_cfg_reg {
+	union {
+		struct {
+			unsigned res:1;         /* Hardware reset */
+			unsigned en:1;          /* xMII interface enable */
+			unsigned isol:1;        /* xMII interface isolate */
+			unsigned ldclkdis:1;    /* Link down clock disable */
+			unsigned rsvd:1;
+			unsigned crs:2;         /* CRS sensitivity config */
+			unsigned rgmii_ibs:1;   /* RGMII In Band status */
+			unsigned rmii:1;        /* RMII ref clock direction */
+			unsigned miirate:3;     /* xMII interface clock rate */
+			unsigned miimode:4;     /* xMII interface mode */
+		} bits;
+		u16 val;
+	};
+};
+
+enum ltq_mii_mii_cfg_miirate {
+	LTQ_MII_MII_CFG_MIIRATE_M2P5 = 0,
+	LTQ_MII_MII_CFG_MIIRATE_M25 = 1,
+	LTQ_MII_MII_CFG_MIIRATE_M125 = 2,
+	LTQ_MII_MII_CFG_MIIRATE_M50 = 3,
+	LTQ_MII_MII_CFG_MIIRATE_AUTO = 4,
+};
+
+enum ltq_mii_mii_cfg_miimode {
+	LTQ_MII_MII_CFG_MIIMODE_MIIP = 0,
+	LTQ_MII_MII_CFG_MIIMODE_MIIM = 1,
+	LTQ_MII_MII_CFG_MIIMODE_RMIIP = 2,
+	LTQ_MII_MII_CFG_MIIMODE_RMIIM = 3,
+	LTQ_MII_MII_CFG_MIIMODE_RGMII = 4,
+};
+
+struct ltq_eth_priv {
+	struct ltq_dma_device *dma_dev;
+	struct mii_dev *bus;
+	struct eth_device *dev;
+	struct phy_device *phymap[LTQ_ETHSW_MAX_GMAC];
+	int rx_num;
+};
+
+enum ltq_mdio_mbusy {
+	LTQ_MDIO_MBUSY_IDLE = 0,
+	LTQ_MDIO_MBUSY_BUSY = 1,
+};
+
+enum ltq_mdio_op {
+	LTQ_MDIO_OP_WRITE = 1,
+	LTQ_MDIO_OP_READ = 2,
+};
+
+struct ltq_mdio_access {
+	union {
+		struct {
+			unsigned rsvd:3;
+			unsigned mbusy:1;
+			unsigned op:2;
+			unsigned phyad:5;
+			unsigned regad:5;
+		} bits;
+		u16 val;
+	};
+};
+
+enum LTQ_ETH_PORT_FLAGS {
+	LTQ_ETH_PORT_NONE       = 0,
+	LTQ_ETH_PORT_PHY        = 1,
+	LTQ_ETH_PORT_SWITCH     = (1 << 1),
+	LTQ_ETH_PORT_MAC        = (1 << 2),
+};
+
+struct ltq_eth_port_config {
+	u8 num;
+	u8 phy_addr;
+	u16 flags;
+	phy_interface_t phy_if;
+};
+
+struct ltq_eth_board_config {
+	const struct ltq_eth_port_config *ports;
+	int num_ports;
+};
+
+static const struct ltq_eth_port_config eth_port_config[] = {
+	/* GMAC0: external Lantiq PEF7071 10/100/1000 PHY for LAN port 0 */
+	{ 0, 0x0, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
+	/* GMAC1: external Lantiq PEF7071 10/100/1000 PHY for LAN port 1 */
+	{ 1, 0x1, LTQ_ETH_PORT_PHY, PHY_INTERFACE_MODE_RGMII },
+};
+
+static const struct ltq_eth_board_config board_config = {
+	.ports = eth_port_config,
+	.num_ports = ARRAY_SIZE(eth_port_config),
+};
+
+static struct ltq_ethsw_mac_pdi_regs *ltq_ethsw_mac_pdi_regs =
+	(struct ltq_ethsw_mac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MAC_PDI_0_BASE);
+
+static struct ltq_ethsw_mdio_pdi_regs *ltq_ethsw_mdio_pdi_regs =
+	(struct ltq_ethsw_mdio_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MDIO_PDI_BASE);
+
+static struct ltq_ethsw_mii_pdi_regs *ltq_ethsw_mii_pdi_regs =
+	(struct ltq_ethsw_mii_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_MII_PDI_BASE);
+
+static struct ltq_ethsw_pmac_pdi_regs *ltq_ethsw_pmac_pdi_regs =
+	(struct ltq_ethsw_pmac_pdi_regs *) CKSEG1ADDR(LTQ_SWITCH_PMAC_PDI_BASE);
+
+
+#define MAX_DMA_CHAN		0x8
+#define MAX_DMA_CRC_LEN		0x4
+#define MAX_DMA_DATA_LEN	0x600
+
+/* use 2 static channels for TX/RX
+   depending on the SoC we need to use different DMA channels for ethernet */
+#define LTQ_ETOP_TX_CHANNEL	1
+#define LTQ_ETOP_RX_CHANNEL	0
+
+#define IS_TX(x)		(x == LTQ_ETOP_TX_CHANNEL)
+#define IS_RX(x)		(x == LTQ_ETOP_RX_CHANNEL)
+
+#define DRV_VERSION	"1.0"
+
+static void __iomem *ltq_vrx200_membase;
+
+struct ltq_vrx200_chan {
+	int idx;
+	int tx_free;
+	struct net_device *netdev;
+	struct napi_struct napi;
+	struct ltq_dma_channel dma;
+	struct sk_buff *skb[LTQ_DESC_NUM];
+};
+
+struct ltq_vrx200_priv {
+	struct net_device *netdev;
+	struct ltq_eth_data *pldata;
+	struct resource *res;
+
+	struct mii_bus *mii_bus;
+	struct phy_device *phydev;
+
+	struct ltq_vrx200_chan ch[MAX_DMA_CHAN];
+	int tx_free[MAX_DMA_CHAN >> 1];
+
+	spinlock_t lock;
+
+	struct clk *clk_ppe;
+};
+
+static int ltq_vrx200_mdio_wr(struct mii_bus *bus, int phy_addr,
+				int phy_reg, u16 phy_data);
+
+static int
+ltq_vrx200_alloc_skb(struct ltq_vrx200_chan *ch)
+{
+	ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN);
+	if (!ch->skb[ch->dma.desc])
+		return -ENOMEM;
+	ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+		ch->skb[ch->dma.desc]->data, MAX_DMA_DATA_LEN,
+		DMA_FROM_DEVICE);
+	ch->dma.desc_base[ch->dma.desc].addr =
+		CPHYSADDR(ch->skb[ch->dma.desc]->data);
+	ch->dma.desc_base[ch->dma.desc].ctl =
+		LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+		MAX_DMA_DATA_LEN;
+	skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
+	return 0;
+}
+
+static void
+ltq_vrx200_hw_receive(struct ltq_vrx200_chan *ch)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+	struct sk_buff *skb = ch->skb[ch->dma.desc];
+	int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - MAX_DMA_CRC_LEN;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (ltq_vrx200_alloc_skb(ch)) {
+		netdev_err(ch->netdev,
+			"failed to allocate new rx buffer, stopping DMA\n");
+		ltq_dma_close(&ch->dma);
+	}
+	ch->dma.desc++;
+	ch->dma.desc %= LTQ_DESC_NUM;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	skb_put(skb, len);
+	skb->dev = ch->netdev;
+	skb->protocol = eth_type_trans(skb, ch->netdev);
+	netif_receive_skb(skb);
+}
+
+static int
+ltq_vrx200_poll_rx(struct napi_struct *napi, int budget)
+{
+	struct ltq_vrx200_chan *ch = container_of(napi,
+				struct ltq_vrx200_chan, napi);
+	struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
+	int rx = 0;
+	int complete = 0;
+	unsigned long flags;
+
+	while ((rx < budget) && !complete) {
+		struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+
+		if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+			ltq_vrx200_hw_receive(ch);
+			rx++;
+		} else {
+			complete = 1;
+		}
+	}
+	if (complete || !rx) {
+		napi_complete(&ch->napi);
+		spin_lock_irqsave(&priv->lock, flags);
+		ltq_dma_ack_irq(&ch->dma);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	return rx;
+}
+
+static int
+ltq_vrx200_poll_tx(struct napi_struct *napi, int budget)
+{
+	struct ltq_vrx200_chan *ch =
+		container_of(napi, struct ltq_vrx200_chan, napi);
+	struct ltq_vrx200_priv *priv = netdev_priv(ch->netdev);
+	struct netdev_queue *txq =
+		netdev_get_tx_queue(ch->netdev, ch->idx >> 1);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	while ((ch->dma.desc_base[ch->tx_free].ctl &
+			(LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+		dev_kfree_skb_any(ch->skb[ch->tx_free]);
+		ch->skb[ch->tx_free] = NULL;
+		memset(&ch->dma.desc_base[ch->tx_free], 0,
+			sizeof(struct ltq_dma_desc));
+		ch->tx_free++;
+		ch->tx_free %= LTQ_DESC_NUM;
+	}
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (netif_tx_queue_stopped(txq))
+		netif_tx_start_queue(txq);
+	napi_complete(&ch->napi);
+	spin_lock_irqsave(&priv->lock, flags);
+	ltq_dma_ack_irq(&ch->dma);
+	spin_unlock_irqrestore(&priv->lock, flags);
+	return 1;
+}
+
+static irqreturn_t
+ltq_vrx200_dma_irq(int irq, void *_priv)
+{
+	struct ltq_vrx200_priv *priv = _priv;
+	int ch = irq - LTQ_DMA_ETOP;
+
+	napi_schedule(&priv->ch[ch].napi);
+	return IRQ_HANDLED;
+}
+
+static void
+ltq_vrx200_free_channel(struct net_device *dev, struct ltq_vrx200_chan *ch)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+
+	ltq_dma_free(&ch->dma);
+	if (ch->dma.irq)
+		free_irq(ch->dma.irq, priv);
+	if (IS_RX(ch->idx)) {
+		int desc;
+		for (desc = 0; desc < LTQ_DESC_NUM; desc++)
+			dev_kfree_skb_any(ch->skb[ch->dma.desc]);
+	}
+}
+
+static void
+ltq_vrx200_hw_exit(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	int i;
+
+	clk_disable(priv->clk_ppe);
+
+	for (i = 0; i < MAX_DMA_CHAN; i++)
+		if (IS_TX(i) || IS_RX(i))
+			ltq_vrx200_free_channel(dev, &priv->ch[i]);
+}
+
+static void *ltq_eth_phy_addr_reg(int num)
+{
+	switch (num) {
+	case 0:
+		return &ltq_ethsw_mdio_pdi_regs->phy_addr_0;
+	case 1:
+		return &ltq_ethsw_mdio_pdi_regs->phy_addr_1;
+	case 2:
+		return &ltq_ethsw_mdio_pdi_regs->phy_addr_2;
+	case 3:
+		return &ltq_ethsw_mdio_pdi_regs->phy_addr_3;
+	case 4:
+		return &ltq_ethsw_mdio_pdi_regs->phy_addr_4;
+	case 5:
+		return &ltq_ethsw_mdio_pdi_regs->phy_addr_5;
+	}
+
+	return NULL;
+}
+
+static void *ltq_eth_mii_cfg_reg(int num)
+{
+	switch (num) {
+	case 0:
+		return &ltq_ethsw_mii_pdi_regs->mii_cfg0;
+	case 1:
+		return &ltq_ethsw_mii_pdi_regs->mii_cfg1;
+	case 2:
+		return &ltq_ethsw_mii_pdi_regs->mii_cfg2;
+	case 3:
+		return &ltq_ethsw_mii_pdi_regs->mii_cfg3;
+	case 4:
+		return &ltq_ethsw_mii_pdi_regs->mii_cfg4;
+	case 5:
+		return &ltq_ethsw_mii_pdi_regs->mii_cfg5;
+	}
+
+	return NULL;
+}
+
+static void ltq_eth_gmac_update(struct phy_device *phydev, int num)
+{
+	struct ltq_mdio_phy_addr_reg phy_addr_reg;
+	struct ltq_mii_mii_cfg_reg mii_cfg_reg;
+	void *phy_addr = ltq_eth_phy_addr_reg(num);
+	void *mii_cfg = ltq_eth_mii_cfg_reg(num);
+
+	phy_addr_reg.val = ltq_r32(phy_addr);
+	mii_cfg_reg.val = ltq_r32(mii_cfg);
+
+	phy_addr_reg.bits.addr = phydev->addr;
+
+	if (phydev->link)
+		phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_UP;
+	else
+		phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
+
+	switch (phydev->speed) {
+	case SPEED_1000:
+		phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_G1;
+		mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M125;
+		break;
+	case SPEED_100:
+		phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M100;
+		switch (mii_cfg_reg.bits.miimode) {
+		case LTQ_MII_MII_CFG_MIIMODE_RMIIM:
+		case LTQ_MII_MII_CFG_MIIMODE_RMIIP:
+			mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M50;
+			break;
+		default:
+			mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M25;
+			break;
+		}
+		break;
+	default:
+		phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
+		mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
+		break;
+	}
+
+	if (phydev->duplex == DUPLEX_FULL)
+		phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_ENABLE;
+	else
+		phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
+
+	dbg_ltq_writel(phy_addr, phy_addr_reg.val);
+	dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
+	udelay(1);
+}
+
+
+static void ltq_eth_port_config(struct ltq_vrx200_priv *priv,
+	const struct ltq_eth_port_config *port)
+{
+	struct ltq_mii_mii_cfg_reg mii_cfg_reg;
+	void *mii_cfg = ltq_eth_mii_cfg_reg(port->num);
+	int setup_gpio = 0;
+
+	mii_cfg_reg.val = ltq_r32(mii_cfg);
+
+
+	switch (port->num) {
+	case 0: /* xMII0 */
+	case 1: /* xMII1 */
+		switch (port->phy_if) {
+		case PHY_INTERFACE_MODE_MII:
+			if (port->flags & LTQ_ETH_PORT_PHY)
+				/* MII MAC mode, connected to external PHY */
+				mii_cfg_reg.bits.miimode =
+					LTQ_MII_MII_CFG_MIIMODE_MIIM;
+			else
+				/* MII PHY mode, connected to external MAC */
+				mii_cfg_reg.bits.miimode =
+					LTQ_MII_MII_CFG_MIIMODE_MIIP;
+				setup_gpio = 1;
+			break;
+		case PHY_INTERFACE_MODE_RMII:
+			if (port->flags & LTQ_ETH_PORT_PHY)
+				/* RMII MAC mode, connected to external PHY */
+				mii_cfg_reg.bits.miimode =
+					LTQ_MII_MII_CFG_MIIMODE_RMIIM;
+			else
+				/* RMII PHY mode, connected to external MAC */
+				mii_cfg_reg.bits.miimode =
+					LTQ_MII_MII_CFG_MIIMODE_RMIIP;
+				setup_gpio = 1;
+				break;
+		case PHY_INTERFACE_MODE_RGMII:
+			/* RGMII MAC mode, connected to external PHY */
+			mii_cfg_reg.bits.miimode =
+				LTQ_MII_MII_CFG_MIIMODE_RGMII;
+			setup_gpio = 1;
+			break;
+		default:
+			break;
+		}
+		break;
+	case 2: /* internal GPHY0 */
+	case 3: /* internal GPHY0 */
+	case 4: /* internal GPHY1 */
+		switch (port->phy_if) {
+			case PHY_INTERFACE_MODE_MII:
+			case PHY_INTERFACE_MODE_GMII:
+				/* MII MAC mode, connected to internal GPHY */
+				mii_cfg_reg.bits.miimode =
+					LTQ_MII_MII_CFG_MIIMODE_MIIM;
+				setup_gpio = 1;
+				break;
+			default:
+				break;
+		}
+		break;
+	case 5: /* internal GPHY1 or xMII2 */
+		switch (port->phy_if) {
+		case PHY_INTERFACE_MODE_MII:
+			/* MII MAC mode, connected to internal GPHY */
+			mii_cfg_reg.bits.miimode =
+				LTQ_MII_MII_CFG_MIIMODE_MIIM;
+			setup_gpio = 1;
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			/* RGMII MAC mode, connected to external PHY */
+			mii_cfg_reg.bits.miimode =
+				LTQ_MII_MII_CFG_MIIMODE_RGMII;
+			setup_gpio = 1;
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	/* Enable MII interface */
+	mii_cfg_reg.bits.en = port->flags ? 1 : 0;
+	dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
+
+}
+
+static void ltq_eth_gmac_init(int num)
+{
+	struct ltq_mdio_phy_addr_reg phy_addr_reg;
+	struct ltq_mii_mii_cfg_reg mii_cfg_reg;
+	void *phy_addr = ltq_eth_phy_addr_reg(num);
+	void *mii_cfg = ltq_eth_mii_cfg_reg(num);
+	struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
+
+	mac_pdi_regs = &ltq_ethsw_mac_pdi_regs->mac[num];
+
+	/* Reset PHY status to link down */
+	phy_addr_reg.val = ltq_r32(phy_addr);
+	phy_addr_reg.bits.addr = num;
+	phy_addr_reg.bits.lnkst = LTQ_MDIO_PHY_ADDR_LNKST_DOWN;
+	phy_addr_reg.bits.speed = LTQ_MDIO_PHY_ADDR_SPEED_M10;
+	phy_addr_reg.bits.fdup = LTQ_MDIO_PHY_ADDR_FDUP_DISABLE;
+	dbg_ltq_writel(phy_addr, phy_addr_reg.val);
+
+	/* Reset and disable MII interface */
+	mii_cfg_reg.val = ltq_r32(mii_cfg);
+	mii_cfg_reg.bits.en = 0;
+	mii_cfg_reg.bits.res = 1;
+	mii_cfg_reg.bits.miirate = LTQ_MII_MII_CFG_MIIRATE_M2P5;
+	dbg_ltq_writel(mii_cfg, mii_cfg_reg.val);
+
+	/*
+	* Enable padding of short frames, enable frame checksum generation
+	* in transmit direction
+	*/
+	dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
+		LTQ_ETHSW_MAC_CTRL0_FCS);
+
+	/* Set inter packet gap size to 12 bytes */
+	dbg_ltq_writel(&mac_pdi_regs->ctrl_1, 12);
+
+	/*
+	* Configure frame length checks:
+	* - allow jumbo frames
+	* - enable long length check
+	* - enable short length without VLAN tags
+	*/
+	dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
+		LTQ_ETHSW_MAC_CTRL2_LCHKL |
+		LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
+}
+
+
+static void ltq_eth_pmac_init(void)
+{
+	struct ltq_ethsw_mac_pdi_x_regs *mac_pdi_regs;
+
+	mac_pdi_regs = &ltq_ethsw_mac_pdi_regs->mac[LTQ_ETHSW_PMAC];
+
+	/*
+	* Enable padding of short frames, enable frame checksum generation
+	* in transmit direction
+	*/
+	dbg_ltq_writel(&mac_pdi_regs->ctrl_0, LTQ_ETHSW_MAC_CTRL0_PADEN |
+		LTQ_ETHSW_MAC_CTRL0_FCS);
+
+	/*
+	* Configure frame length checks:
+	* - allow jumbo frames
+	* - enable long length check
+	* - enable short length without VLAN tags
+	*/
+	dbg_ltq_writel(&mac_pdi_regs->ctrl_2, LTQ_ETHSW_MAC_CTRL2_MLEN |
+		LTQ_ETHSW_MAC_CTRL2_LCHKL |
+		LTQ_ETHSW_MAC_CTRL2_LCHKS_UNTAG);
+
+	/*
+	* Apply workaround for buffer congestion:
+	* - shorten preambel to 1 byte
+	* - set minimum inter packet gap size to 7 bytes
+	* - enable receive buffer bypass mode
+	*/
+	dbg_ltq_writel(&mac_pdi_regs->ctrl_1, LTQ_ETHSW_MAC_CTRL1_SHORTPRE | 7);
+	dbg_ltq_writel(&mac_pdi_regs->ctrl_6,
+		(6 << LTQ_ETHSW_MAC_CTRL6_RBUF_DLY_WP_SHIFT) |
+		LTQ_ETHSW_MAC_CTRL6_RXBUF_BYPASS);
+
+	/* Set request assertion threshold to 8, IPG counter to 11 */
+	dbg_ltq_writel(&ltq_ethsw_pmac_pdi_regs->rx_ipg, 0x8B);
+
+	/*
+	* Configure frame header control:
+	* - enable reaction on pause frames (flow control)
+	* - remove CRC for packets from PMAC to DMA
+	* - add CRC for packets from DMA to PMAC
+	*/
+	dbg_ltq_writel(&ltq_ethsw_pmac_pdi_regs->hd_ctl, LTQ_ETHSW_PMAC_HD_CTL_FC |
+		/*LTQ_ETHSW_PMAC_HD_CTL_RC | */LTQ_ETHSW_PMAC_HD_CTL_AC);
+}
+
+static int
+ltq_vrx200_hw_init(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	int err = 0;
+	int i;
+
+	netdev_info(dev, "setting up dma\n");
+	ltq_dma_init_port(DMA_PORT_ETOP);
+
+	netdev_info(dev, "setting up pmu\n");
+	clk_enable(priv->clk_ppe);
+
+	/* Reset ethernet and switch subsystems */
+	netdev_info(dev, "reset core\n");
+	ltq_reset_once(BIT(8), 10);
+
+	/* Enable switch macro */
+	ltq_setbits(&ltq_ethsw_mdio_pdi_regs->glob_ctrl,
+		LTQ_ETHSW_GLOB_CTRL_SE);
+
+	/* Disable MDIO auto-polling for all ports */
+	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdc_cfg_0, 0);
+
+	/*
+	 * Enable and set MDIO management clock to 2.5 MHz. This is the
+	 * maximum clock for FE PHYs.
+	 * Formula for clock is:
+	 *
+	 *      50 MHz
+	 * x = ----------- - 1
+	 *      2 * f_MDC
+	 */
+	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdc_cfg_1,
+		LTQ_ETHSW_MDC_CFG1_MCEN | 9);
+
+	/* Init MAC connected to CPU  */
+	ltq_eth_pmac_init();
+
+	/* Init MACs connected to external MII interfaces */
+	for (i = 0; i < LTQ_ETHSW_MAX_GMAC; i++)
+		ltq_eth_gmac_init(i);
+
+	for (i = 0; i < MAX_DMA_CHAN && !err; i++) {
+		int irq = LTQ_DMA_ETOP + i;
+		struct ltq_vrx200_chan *ch = &priv->ch[i];
+
+		ch->idx = ch->dma.nr = i;
+
+		if (IS_TX(i)) {
+			ltq_dma_alloc_tx(&ch->dma);
+			err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
+				"vrx200_tx", priv);
+		} else if (IS_RX(i)) {
+			ltq_dma_alloc_rx(&ch->dma);
+			for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+					ch->dma.desc++)
+				if (ltq_vrx200_alloc_skb(ch))
+					err = -ENOMEM;
+			ch->dma.desc = 0;
+			err = request_irq(irq, ltq_vrx200_dma_irq, IRQF_DISABLED,
+				"vrx200_rx", priv);
+		}
+		if (!err)
+			ch->dma.irq = irq;
+	}
+	for (i = 0; i < board_config.num_ports; i++)
+		ltq_eth_port_config(priv, &board_config.ports[i]);
+	return err;
+}
+
+static void
+ltq_vrx200_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	strcpy(info->driver, "Lantiq ETOP");
+	strcpy(info->bus_info, "internal");
+	strcpy(info->version, DRV_VERSION);
+}
+
+static int
+ltq_vrx200_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+
+	return phy_ethtool_gset(priv->phydev, cmd);
+}
+
+static int
+ltq_vrx200_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+
+	return phy_ethtool_sset(priv->phydev, cmd);
+}
+
+static int
+ltq_vrx200_nway_reset(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+
+	return phy_start_aneg(priv->phydev);
+}
+
+static const struct ethtool_ops ltq_vrx200_ethtool_ops = {
+	.get_drvinfo = ltq_vrx200_get_drvinfo,
+	.get_settings = ltq_vrx200_get_settings,
+	.set_settings = ltq_vrx200_set_settings,
+	.nway_reset = ltq_vrx200_nway_reset,
+};
+
+static inline int ltq_mdio_poll(struct mii_bus *bus)
+{
+	struct ltq_mdio_access acc;
+	unsigned cnt = 10000;
+
+	while (likely(cnt--)) {
+		acc.val = ltq_r32(&ltq_ethsw_mdio_pdi_regs->mdio_ctrl);
+		if (!acc.bits.mbusy)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int
+ltq_vrx200_mdio_wr(struct mii_bus *bus, int addr, int regnum, u16 val)
+{
+	struct ltq_mdio_access acc;
+	int ret;
+
+	acc.val = 0;
+	acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
+	acc.bits.op = LTQ_MDIO_OP_WRITE;
+	acc.bits.phyad = addr;
+	acc.bits.regad = regnum;
+
+	ret = ltq_mdio_poll(bus);
+	if (ret)
+		return ret;
+
+	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdio_write, val);
+	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
+
+	return 0;
+}
+
+static int
+ltq_vrx200_mdio_rd(struct mii_bus *bus, int addr, int regnum)
+{
+	struct ltq_mdio_access acc;
+	int ret;
+
+	acc.val = 0;
+	acc.bits.mbusy = LTQ_MDIO_MBUSY_BUSY;
+	acc.bits.op = LTQ_MDIO_OP_READ;
+	acc.bits.phyad = addr;
+	acc.bits.regad = regnum;
+
+	ret = ltq_mdio_poll(bus);
+	if (ret)
+		goto timeout;
+
+	dbg_ltq_writel(&ltq_ethsw_mdio_pdi_regs->mdio_ctrl, acc.val);
+
+	ret = ltq_mdio_poll(bus);
+	if (ret)
+		goto timeout;
+
+	ret = ltq_r32(&ltq_ethsw_mdio_pdi_regs->mdio_read);
+
+	return ret;
+timeout:
+	return -1;
+}
+
+static void
+ltq_vrx200_mdio_link(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	ltq_eth_gmac_update(priv->phydev, 0);
+}
+
+static int
+ltq_vrx200_mdio_probe(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	struct phy_device *phydev = NULL;
+	int val;
+
+	phydev = priv->mii_bus->phy_map[0];
+
+	if (!phydev) {
+		netdev_err(dev, "no PHY found\n");
+		return -ENODEV;
+	}
+
+	phydev = phy_connect(dev, dev_name(&phydev->dev), &ltq_vrx200_mdio_link,
+			0, 0);
+
+	if (IS_ERR(phydev)) {
+		netdev_err(dev, "Could not attach to PHY\n");
+		return PTR_ERR(phydev);
+	}
+
+	phydev->supported &= (SUPPORTED_10baseT_Half
+			      | SUPPORTED_10baseT_Full
+			      | SUPPORTED_100baseT_Half
+			      | SUPPORTED_100baseT_Full
+			      | SUPPORTED_1000baseT_Half
+			      | SUPPORTED_1000baseT_Full
+			      | SUPPORTED_Autoneg
+			      | SUPPORTED_MII
+			      | SUPPORTED_TP);
+	phydev->advertising = phydev->supported;
+	priv->phydev = phydev;
+
+	pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+	       dev->name, phydev->drv->name,
+	       dev_name(&phydev->dev), phydev->irq);
+
+	val = ltq_vrx200_mdio_rd(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
+	val |= ADVERTIZE_MPD;
+	ltq_vrx200_mdio_wr(priv->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
+	ltq_vrx200_mdio_wr(priv->mii_bus, 0, 0, 0x1040);
+
+        phy_start_aneg(phydev);
+
+	return 0;
+}
+
+static int
+ltq_vrx200_mdio_init(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	int i;
+	int err;
+
+	priv->mii_bus = mdiobus_alloc();
+	if (!priv->mii_bus) {
+		netdev_err(dev, "failed to allocate mii bus\n");
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	priv->mii_bus->priv = dev;
+	priv->mii_bus->read = ltq_vrx200_mdio_rd;
+	priv->mii_bus->write = ltq_vrx200_mdio_wr;
+	priv->mii_bus->name = "ltq_mii";
+	snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+	priv->mii_bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL);
+	if (!priv->mii_bus->irq) {
+		err = -ENOMEM;
+		goto err_out_free_mdiobus;
+	}
+
+	for (i = 0; i < PHY_MAX_ADDR; ++i)
+		priv->mii_bus->irq[i] = PHY_POLL;
+
+	if (mdiobus_register(priv->mii_bus)) {
+		err = -ENXIO;
+		goto err_out_free_mdio_irq;
+	}
+
+	if (ltq_vrx200_mdio_probe(dev)) {
+		err = -ENXIO;
+		goto err_out_unregister_bus;
+	}
+	return 0;
+
+err_out_unregister_bus:
+	mdiobus_unregister(priv->mii_bus);
+err_out_free_mdio_irq:
+	kfree(priv->mii_bus->irq);
+err_out_free_mdiobus:
+	mdiobus_free(priv->mii_bus);
+err_out:
+	return err;
+}
+
+static void
+ltq_vrx200_mdio_cleanup(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+
+	phy_disconnect(priv->phydev);
+	mdiobus_unregister(priv->mii_bus);
+	kfree(priv->mii_bus->irq);
+	mdiobus_free(priv->mii_bus);
+}
+
+void phy_dump(struct net_device *dev)
+{
+        struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	int i;
+	for (i = 0; i < 0x1F; i++) {
+		unsigned int val = ltq_vrx200_mdio_rd(priv->mii_bus, 0, i);
+		printk("%d %4X\n", i, val);
+	}
+}
+
+static int
+ltq_vrx200_open(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	int i;
+	unsigned long flags;
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		struct ltq_vrx200_chan *ch = &priv->ch[i];
+
+		if (!IS_TX(i) && (!IS_RX(i)))
+			continue;
+		napi_enable(&ch->napi);
+		spin_lock_irqsave(&priv->lock, flags);
+		ltq_dma_open(&ch->dma);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	if (priv->phydev) {
+		phy_start(priv->phydev);
+		phy_dump(dev);
+	}
+	netif_tx_start_all_queues(dev);
+	return 0;
+}
+
+static int
+ltq_vrx200_stop(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	int i;
+	unsigned long flags;
+
+	netif_tx_stop_all_queues(dev);
+	if (priv->phydev)
+		phy_stop(priv->phydev);
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		struct ltq_vrx200_chan *ch = &priv->ch[i];
+
+		if (!IS_RX(i) && !IS_TX(i))
+			continue;
+		napi_disable(&ch->napi);
+		spin_lock_irqsave(&priv->lock, flags);
+		ltq_dma_close(&ch->dma);
+		spin_unlock_irqrestore(&priv->lock, flags);
+	}
+	return 0;
+}
+
+static int
+ltq_vrx200_tx(struct sk_buff *skb, struct net_device *dev)
+{
+	int queue = skb_get_queue_mapping(skb);
+	struct netdev_queue *txq = netdev_get_tx_queue(dev, queue);
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	struct ltq_vrx200_chan *ch = &priv->ch[(queue << 1) | 1];
+	struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+	unsigned long flags;
+	u32 byte_offset;
+	int len;
+
+	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+	if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+		netdev_err(dev, "tx ring full\n");
+		netif_tx_stop_queue(txq);
+		return NETDEV_TX_BUSY;
+	}
+
+	/* dma needs to start on a 16 byte aligned address */
+	byte_offset = CPHYSADDR(skb->data) % 16;
+	ch->skb[ch->dma.desc] = skb;
+
+	dev->trans_start = jiffies;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
+						DMA_TO_DEVICE)) - byte_offset;
+	wmb();
+	desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+		LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+	ch->dma.desc++;
+	ch->dma.desc %= LTQ_DESC_NUM;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN)
+		netif_tx_stop_queue(txq);
+
+	return NETDEV_TX_OK;
+}
+
+static int
+ltq_vrx200_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+
+	/* TODO: mii-toll reports "No MII transceiver present!." ?!*/
+	return phy_mii_ioctl(priv->phydev, rq, cmd);
+}
+
+static u16
+ltq_vrx200_select_queue(struct net_device *dev, struct sk_buff *skb)
+{
+	/* we are currently only using the first queue */
+	return 0;
+}
+
+static int
+ltq_vrx200_init(struct net_device *dev)
+{
+	struct ltq_vrx200_priv *priv = netdev_priv(dev);
+	struct sockaddr mac;
+	int err;
+
+	ether_setup(dev);
+	dev->watchdog_timeo = 10 * HZ;
+
+	err = ltq_vrx200_hw_init(dev);
+	if (err)
+		goto err_hw;
+
+	memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr));
+	if (!is_valid_ether_addr(mac.sa_data)) {
+		pr_warn("vrx200: invalid MAC, using random\n");
+		random_ether_addr(mac.sa_data);
+	}
+	eth_mac_addr(dev, &mac);
+
+	if (!ltq_vrx200_mdio_init(dev))
+		dev->ethtool_ops = &ltq_vrx200_ethtool_ops;
+	else
+		pr_warn("vrx200: mdio probe failed\n");;
+	return 0;
+
+err_hw:
+	ltq_vrx200_hw_exit(dev);
+	return err;
+}
+
+static void
+ltq_vrx200_tx_timeout(struct net_device *dev)
+{
+	int err;
+
+	ltq_vrx200_hw_exit(dev);
+	err = ltq_vrx200_hw_init(dev);
+	if (err)
+		goto err_hw;
+	dev->trans_start = jiffies;
+	netif_wake_queue(dev);
+	return;
+
+err_hw:
+	ltq_vrx200_hw_exit(dev);
+	netdev_err(dev, "failed to restart vrx200 after TX timeout\n");
+}
+
+static const struct net_device_ops ltq_eth_netdev_ops = {
+	.ndo_open = ltq_vrx200_open,
+	.ndo_stop = ltq_vrx200_stop,
+	.ndo_start_xmit = ltq_vrx200_tx,
+	.ndo_change_mtu = eth_change_mtu,
+	.ndo_do_ioctl = ltq_vrx200_ioctl,
+	.ndo_set_mac_address = eth_mac_addr,
+	.ndo_validate_addr = eth_validate_addr,
+	.ndo_select_queue = ltq_vrx200_select_queue,
+	.ndo_init = ltq_vrx200_init,
+	.ndo_tx_timeout = ltq_vrx200_tx_timeout,
+};
+
+static int __devinit
+ltq_vrx200_probe(struct platform_device *pdev)
+{
+	struct net_device *dev;
+	struct ltq_vrx200_priv *priv;
+	struct resource *res;
+	int err;
+	int i;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "failed to get vrx200 resource\n");
+		err = -ENOENT;
+		goto err_out;
+	}
+
+	res = devm_request_mem_region(&pdev->dev, res->start,
+		resource_size(res), dev_name(&pdev->dev));
+	if (!res) {
+		dev_err(&pdev->dev, "failed to request vrx200 resource\n");
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	ltq_vrx200_membase = devm_ioremap_nocache(&pdev->dev,
+		res->start, resource_size(res));
+	if (!ltq_vrx200_membase) {
+		dev_err(&pdev->dev, "failed to remap vrx200 engine %d\n",
+			pdev->id);
+		err = -ENOMEM;
+		goto err_out;
+	}
+
+	if (ltq_gpio_request(&pdev->dev, 42, 2, 1, "MDIO") ||
+			ltq_gpio_request(&pdev->dev, 43, 2, 1, "MDC")) {
+		dev_err(&pdev->dev, "failed to request MDIO gpios\n");
+		err = -EBUSY;
+		goto err_out;
+	}
+
+	dev = alloc_etherdev_mq(sizeof(struct ltq_vrx200_priv), 4);
+	strcpy(dev->name, "eth%d");
+	dev->netdev_ops = &ltq_eth_netdev_ops;
+	priv = netdev_priv(dev);
+	priv->res = res;
+	priv->pldata = dev_get_platdata(&pdev->dev);
+	priv->netdev = dev;
+
+	priv->clk_ppe = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->clk_ppe))
+		return PTR_ERR(priv->clk_ppe);
+
+	spin_lock_init(&priv->lock);
+
+	for (i = 0; i < MAX_DMA_CHAN; i++) {
+		if (IS_TX(i))
+			netif_napi_add(dev, &priv->ch[i].napi,
+				ltq_vrx200_poll_tx, 8);
+		else if (IS_RX(i))
+			netif_napi_add(dev, &priv->ch[i].napi,
+				ltq_vrx200_poll_rx, 32);
+		priv->ch[i].netdev = dev;
+	}
+
+	err = register_netdev(dev);
+	if (err)
+		goto err_free;
+
+	platform_set_drvdata(pdev, dev);
+	return 0;
+
+err_free:
+	kfree(dev);
+err_out:
+	return err;
+}
+
+static int __devexit
+ltq_vrx200_remove(struct platform_device *pdev)
+{
+	struct net_device *dev = platform_get_drvdata(pdev);
+
+	if (dev) {
+		netif_tx_stop_all_queues(dev);
+		ltq_vrx200_hw_exit(dev);
+		ltq_vrx200_mdio_cleanup(dev);
+		unregister_netdev(dev);
+	}
+	return 0;
+}
+
+static struct platform_driver ltq_mii_driver = {
+	.probe = ltq_vrx200_probe,
+	.remove = __devexit_p(ltq_vrx200_remove),
+	.driver = {
+		.name = "ltq_vrx200",
+		.owner = THIS_MODULE,
+	},
+};
+
+module_platform_driver(ltq_mii_driver);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC ETOP");
+MODULE_LICENSE("GPL");