1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-05 05:49:42 +02:00
openwrt-xburst/target/linux/at91/patches-2.6.21/009-fdl-uartinit.patch

37 lines
1.4 KiB
Diff
Raw Normal View History

Index: linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
===================================================================
--- linux-2.6.21.7.orig/arch/arm/mach-at91/at91rm9200_devices.c
+++ linux-2.6.21.7/arch/arm/mach-at91/at91rm9200_devices.c
@@ -618,7 +618,6 @@ void __init at91_init_leds(u8 cpu_led, u
#if defined(CONFIG_NEW_LEDS)
-
static struct platform_device at91_leds = {
.name = "at91_leds",
.id = -1,
@@ -724,6 +723,10 @@ static inline void configure_usart0_pins
* We need to drive the pin manually. Default is off (RTS is active low).
*/
at91_set_gpio_output(AT91_PIN_PA21, 1);
+ at91_set_gpio_output(AT91_PIN_PB6, 1); /* DTR0 */
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* RI0 */
+ at91_set_gpio_input(AT91_PIN_PA19, 1); /* DCD0 */
+ at91_set_deglitch(AT91_PIN_PA19, 1);
}
static struct resource uart1_resources[] = {
@@ -835,6 +838,12 @@ static inline void configure_usart3_pins
{
at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
+ at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
+ at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
+ at91_set_gpio_output(AT91_PIN_PB29, 1); /* DTR0 */
+ at91_set_gpio_output(AT91_PIN_PB2, 1); /* RI0 */
+ at91_set_gpio_input(AT91_PIN_PA24, 1); /* DCD0 */
+ at91_set_deglitch(AT91_PIN_PA24, 1);
}
struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */