mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-18 15:49:20 +02:00
90 lines
2.8 KiB
Diff
90 lines
2.8 KiB
Diff
|
From af14a456c58c153c6d761e6c0af48157692b52ad Mon Sep 17 00:00:00 2001
|
||
|
|
From: John Crispin <blogic@openwrt.org>
|
||
|
|
Date: Fri, 9 Nov 2012 13:43:30 +0100
|
||
|
|
Subject: [PATCH 5/6] MIPS: lantiq: adds code for booting GPHY
|
||
|
|
|
||
|
|
The XRX200 family of SoCs has embedded gigabit PHYs. This patch adds code to
|
||
|
|
boot them up.
|
||
|
|
|
||
|
|
Signed-off-by: John Crispin <blogic@openwrt.org>
|
||
|
|
Patchwork: http://patchwork.linux-mips.org/patch/4522
|
||
|
|
---
|
||
|
|
.../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 ++
|
||
|
|
arch/mips/lantiq/xway/reset.c | 36 ++++++++++++++++++++
|
||
|
|
2 files changed, 39 insertions(+)
|
||
|
|
|
||
|
|
diff --git a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
|
||
|
|
index 6a2df70..133336b 100644
|
||
|
|
--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
|
||
|
|
+++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h
|
||
|
|
@@ -82,6 +82,9 @@ extern __iomem void *ltq_cgu_membase;
|
||
|
|
#define LTQ_MPS_BASE_ADDR (KSEG1 + 0x1F107000)
|
||
|
|
#define LTQ_MPS_CHIPID ((u32 *)(LTQ_MPS_BASE_ADDR + 0x0344))
|
||
|
|
|
||
|
|
+/* allow booting xrx200 phys */
|
||
|
|
+int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr);
|
||
|
|
+
|
||
|
|
/* request a non-gpio and set the PIO config */
|
||
|
|
#define PMU_PPE BIT(13)
|
||
|
|
extern void ltq_pmu_enable(unsigned int module);
|
||
|
|
diff --git a/arch/mips/lantiq/xway/reset.c b/arch/mips/lantiq/xway/reset.c
|
||
|
|
index 2799212..544dbb7 100644
|
||
|
|
--- a/arch/mips/lantiq/xway/reset.c
|
||
|
|
+++ b/arch/mips/lantiq/xway/reset.c
|
||
|
|
@@ -28,9 +28,15 @@
|
||
|
|
#define RCU_RST_REQ 0x0010
|
||
|
|
/* reset status register */
|
||
|
|
#define RCU_RST_STAT 0x0014
|
||
|
|
+/* vr9 gphy registers */
|
||
|
|
+#define RCU_GFS_ADD0_XRX200 0x0020
|
||
|
|
+#define RCU_GFS_ADD1_XRX200 0x0068
|
||
|
|
|
||
|
|
/* reboot bit */
|
||
|
|
+#define RCU_RD_GPHY0_XRX200 BIT(31)
|
||
|
|
#define RCU_RD_SRST BIT(30)
|
||
|
|
+#define RCU_RD_GPHY1_XRX200 BIT(29)
|
||
|
|
+
|
||
|
|
/* reset cause */
|
||
|
|
#define RCU_STAT_SHIFT 26
|
||
|
|
/* boot selection */
|
||
|
|
@@ -60,6 +66,36 @@ unsigned char ltq_boot_select(void)
|
||
|
|
return RCU_BOOT_SEL(val);
|
||
|
|
}
|
||
|
|
|
||
|
|
+/* reset / boot a gphy */
|
||
|
|
+static struct ltq_xrx200_gphy_reset {
|
||
|
|
+ u32 rd;
|
||
|
|
+ u32 addr;
|
||
|
|
+} xrx200_gphy[] = {
|
||
|
|
+ {RCU_RD_GPHY0_XRX200, RCU_GFS_ADD0_XRX200},
|
||
|
|
+ {RCU_RD_GPHY1_XRX200, RCU_GFS_ADD1_XRX200},
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+/* reset and boot a gphy. these phys only exist on xrx200 SoC */
|
||
|
|
+int xrx200_gphy_boot(struct device *dev, unsigned int id, dma_addr_t dev_addr)
|
||
|
|
+{
|
||
|
|
+ if (!of_device_is_compatible(ltq_rcu_np, "lantiq,rcu-xrx200")) {
|
||
|
|
+ dev_err(dev, "this SoC has no GPHY\n");
|
||
|
|
+ return -EINVAL;
|
||
|
|
+ }
|
||
|
|
+ if (id > 1) {
|
||
|
|
+ dev_err(dev, "%u is an invalid gphy id\n", id);
|
||
|
|
+ return -EINVAL;
|
||
|
|
+ }
|
||
|
|
+ dev_info(dev, "booting GPHY%u firmware at %X\n", id, dev_addr);
|
||
|
|
+
|
||
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) | xrx200_gphy[id].rd,
|
||
|
|
+ RCU_RST_REQ);
|
||
|
|
+ ltq_rcu_w32(dev_addr, xrx200_gphy[id].addr);
|
||
|
|
+ ltq_rcu_w32(ltq_rcu_r32(RCU_RST_REQ) & ~xrx200_gphy[id].rd,
|
||
|
|
+ RCU_RST_REQ);
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
/* reset a io domain for u micro seconds */
|
||
|
|
void ltq_reset_once(unsigned int module, ulong u)
|
||
|
|
{
|
||
|
|
--
|
||
|
|
1.7.10.4
|
||
|
|
|