openwrt-xburst/target/linux/brcm63xx/patches-3.6/552-board_96348gw-10_reset_button.patch

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -844,6 +844,17 @@ static struct board_info __initdata boar
 			.active_low	= 1,
 		},
 	},
+
+	.buttons = {
+		{
+			.desc		= "reset",
+			.gpio		= 6,
+			.active_low	= 1,
+			.type		= EV_KEY,
+			.code		= KEY_RESTART,
+			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+		},
+	},
 };
 
 static struct board_info __initdata board_96348gw_11 = {
[brcm63xx] add preliminary support for 3.6 kernel git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33936 3c298f89-4303-0410-b956-a3cf2f4a3e73 2012-10-26 00:16:51 +03:00			`--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c`
			`+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c`
bcm63xx: Enable LED pin support for ath9k pci fixup. Some boards need specifying LED pin in order to get it working. For example, in board HW556 (Huawei HG556a) "led_pin" must be "2". By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1". Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34321 3c298f89-4303-0410-b956-a3cf2f4a3e73 2012-11-24 16:19:16 +02:00			`@@ -844,6 +844,17 @@ static struct board_info __initdata boar`
[brcm63xx] add preliminary support for 3.6 kernel git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33936 3c298f89-4303-0410-b956-a3cf2f4a3e73 2012-10-26 00:16:51 +03:00			`.active_low = 1,`
			`},`
			`},`
			`+`
			`+ .buttons = {`
			`+ {`
			`+ .desc = "reset",`
			`+ .gpio = 6,`
			`+ .active_low = 1,`
			`+ .type = EV_KEY,`
			`+ .code = KEY_RESTART,`
			`+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,`
			`+ },`
			`+ },`
			`};`

			`static struct board_info __initdata board_96348gw_11 = {`