1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-29 17:22:24 +02:00
openwrt-xburst/target/linux/brcm-2.4/files/arch/mips/bcm947xx/include/sbextif.h

235 lines
6.5 KiB
C
Raw Normal View History

/*
* Hardware-specific External Interface I/O core definitions
* for the BCM47xx family of SiliconBackplane-based chips.
*
* The External Interface core supports a total of three external chip selects
* supporting external interfaces. One of the external chip selects is
* used for Flash, one is used for PCMCIA, and the other may be
* programmed to support either a synchronous interface or an
* asynchronous interface. The asynchronous interface can be used to
* support external devices such as UARTs and the BCM2019 Bluetooth
* baseband processor.
* The external interface core also contains 2 on-chip 16550 UARTs, clock
* frequency control, a watchdog interrupt timer, and a GPIO interface.
*
* Copyright 2006, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id: sbextif.h,v 1.1.1.8 2006/02/27 03:43:16 honor Exp $
*/
#ifndef _SBEXTIF_H
#define _SBEXTIF_H
/* external interface address space */
#define EXTIF_PCMCIA_MEMBASE(x) (x)
#define EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
#define EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
#define EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
#define EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
/* cpp contortions to concatenate w/arg prescan */
#ifndef PAD
#define _PADLINE(line) pad ## line
#define _XSTR(line) _PADLINE(line)
#define PAD _XSTR(__LINE__)
#endif /* PAD */
/*
* The multiple instances of output and output enable registers
* are present to allow driver software for multiple cores to control
* gpio outputs without needing to share a single register pair.
*/
struct gpiouser {
uint32 out;
uint32 outen;
};
#define NGPIOUSER 5
typedef volatile struct {
uint32 corecontrol;
uint32 extstatus;
uint32 PAD[2];
/* pcmcia control registers */
uint32 pcmcia_config;
uint32 pcmcia_memwait;
uint32 pcmcia_attrwait;
uint32 pcmcia_iowait;
/* programmable interface control registers */
uint32 prog_config;
uint32 prog_waitcount;
/* flash control registers */
uint32 flash_config;
uint32 flash_waitcount;
uint32 PAD[4];
uint32 watchdog;
/* clock control */
uint32 clockcontrol_n;
uint32 clockcontrol_sb;
uint32 clockcontrol_pci;
uint32 clockcontrol_mii;
uint32 PAD[3];
/* gpio */
uint32 gpioin;
struct gpiouser gpio[NGPIOUSER];
uint32 PAD;
uint32 ejtagouten;
uint32 gpiointpolarity;
uint32 gpiointmask;
uint32 PAD[153];
uint8 uartdata;
uint8 PAD[3];
uint8 uartimer;
uint8 PAD[3];
uint8 uartfcr;
uint8 PAD[3];
uint8 uartlcr;
uint8 PAD[3];
uint8 uartmcr;
uint8 PAD[3];
uint8 uartlsr;
uint8 PAD[3];
uint8 uartmsr;
uint8 PAD[3];
uint8 uartscratch;
uint8 PAD[3];
} extifregs_t;
/* corecontrol */
#define CC_UE (1 << 0) /* uart enable */
/* extstatus */
#define ES_EM (1 << 0) /* endian mode (ro) */
#define ES_EI (1 << 1) /* external interrupt pin (ro) */
#define ES_GI (1 << 2) /* gpio interrupt pin (ro) */
/* gpio bit mask */
#define GPIO_BIT0 (1 << 0)
#define GPIO_BIT1 (1 << 1)
#define GPIO_BIT2 (1 << 2)
#define GPIO_BIT3 (1 << 3)
#define GPIO_BIT4 (1 << 4)
#define GPIO_BIT5 (1 << 5)
#define GPIO_BIT6 (1 << 6)
#define GPIO_BIT7 (1 << 7)
/* pcmcia/prog/flash_config */
#define CF_EN (1 << 0) /* enable */
#define CF_EM_MASK 0xe /* mode */
#define CF_EM_SHIFT 1
#define CF_EM_FLASH 0x0 /* flash/asynchronous mode */
#define CF_EM_SYNC 0x2 /* synchronous mode */
#define CF_EM_PCMCIA 0x4 /* pcmcia mode */
#define CF_DS (1 << 4) /* destsize: 0=8bit, 1=16bit */
#define CF_BS (1 << 5) /* byteswap */
#define CF_CD_MASK 0xc0 /* clock divider */
#define CF_CD_SHIFT 6
#define CF_CD_DIV2 0x0 /* backplane/2 */
#define CF_CD_DIV3 0x40 /* backplane/3 */
#define CF_CD_DIV4 0x80 /* backplane/4 */
#define CF_CE (1 << 8) /* clock enable */
#define CF_SB (1 << 9) /* size/bytestrobe (synch only) */
/* pcmcia_memwait */
#define PM_W0_MASK 0x3f /* waitcount0 */
#define PM_W1_MASK 0x1f00 /* waitcount1 */
#define PM_W1_SHIFT 8
#define PM_W2_MASK 0x1f0000 /* waitcount2 */
#define PM_W2_SHIFT 16
#define PM_W3_MASK 0x1f000000 /* waitcount3 */
#define PM_W3_SHIFT 24
/* pcmcia_attrwait */
#define PA_W0_MASK 0x3f /* waitcount0 */
#define PA_W1_MASK 0x1f00 /* waitcount1 */
#define PA_W1_SHIFT 8
#define PA_W2_MASK 0x1f0000 /* waitcount2 */
#define PA_W2_SHIFT 16
#define PA_W3_MASK 0x1f000000 /* waitcount3 */
#define PA_W3_SHIFT 24
/* prog_waitcount */
#define PW_W0_MASK 0x0000001f /* waitcount0 */
#define PW_W1_MASK 0x00001f00 /* waitcount1 */
#define PW_W1_SHIFT 8
#define PW_W2_MASK 0x001f0000 /* waitcount2 */
#define PW_W2_SHIFT 16
#define PW_W3_MASK 0x1f000000 /* waitcount3 */
#define PW_W3_SHIFT 24
#define PW_W0 0x0000000c
#define PW_W1 0x00000a00
#define PW_W2 0x00020000
#define PW_W3 0x01000000
/* flash_waitcount */
#define FW_W0_MASK 0x1f /* waitcount0 */
#define FW_W1_MASK 0x1f00 /* waitcount1 */
#define FW_W1_SHIFT 8
#define FW_W2_MASK 0x1f0000 /* waitcount2 */
#define FW_W2_SHIFT 16
#define FW_W3_MASK 0x1f000000 /* waitcount3 */
#define FW_W3_SHIFT 24
/* watchdog */
#define WATCHDOG_CLOCK 48000000 /* Hz */
/* clockcontrol_n */
#define CN_N1_MASK 0x3f /* n1 control */
#define CN_N2_MASK 0x3f00 /* n2 control */
#define CN_N2_SHIFT 8
/* clockcontrol_sb/pci/mii */
#define CC_M1_MASK 0x3f /* m1 control */
#define CC_M2_MASK 0x3f00 /* m2 control */
#define CC_M2_SHIFT 8
#define CC_M3_MASK 0x3f0000 /* m3 control */
#define CC_M3_SHIFT 16
#define CC_MC_MASK 0x1f000000 /* mux control */
#define CC_MC_SHIFT 24
/* Clock control default values */
#define CC_DEF_N 0x0009 /* Default values for bcm4710 */
#define CC_DEF_100 0x04020011
#define CC_DEF_33 0x11030011
#define CC_DEF_25 0x11050011
/* Clock control values for 125Mhz */
#define CC_125_N 0x0802
#define CC_125_M 0x04020009
#define CC_125_M25 0x11090009
#define CC_125_M33 0x11090005
/* Clock control magic field values */
#define CC_F6_2 0x02 /* A factor of 2 in */
#define CC_F6_3 0x03 /* 6-bit fields like */
#define CC_F6_4 0x05 /* N1, M1 or M3 */
#define CC_F6_5 0x09
#define CC_F6_6 0x11
#define CC_F6_7 0x21
#define CC_F5_BIAS 5 /* 5-bit fields get this added */
#define CC_MC_BYPASS 0x08
#define CC_MC_M1 0x04
#define CC_MC_M1M2 0x02
#define CC_MC_M1M2M3 0x01
#define CC_MC_M1M3 0x11
#define CC_CLOCK_BASE 24000000 /* Half the clock freq. in the 4710 */
#endif /* _SBEXTIF_H */