mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-13 16:22:50 +02:00
312 lines
7.4 KiB
C
312 lines
7.4 KiB
C
|
/* Only eth0 supported for now
|
||
|
*
|
||
|
* (C) Copyright 2003
|
||
|
* Thomas.Lange@corelatus.se
|
||
|
*
|
||
|
* See file CREDITS for list of people who contributed to this
|
||
|
* project.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation; either version 2 of
|
||
|
* the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
* MA 02111-1307 USA
|
||
|
*/
|
||
|
#include <config.h>
|
||
|
|
||
|
#ifdef CONFIG_AU1X00
|
||
|
|
||
|
#if defined(CFG_DISCOVER_PHY)
|
||
|
#error "PHY not supported yet"
|
||
|
/* We just assume that we are running 100FD for now */
|
||
|
/* We all use switches, right? ;-) */
|
||
|
#endif
|
||
|
|
||
|
/* I assume ethernet behaves like au1000 */
|
||
|
|
||
|
#ifdef CONFIG_AU1000
|
||
|
/* Base address differ between cpu:s */
|
||
|
#define ETH0_BASE AU1000_ETH0_BASE
|
||
|
#define MAC0_ENABLE AU1000_MAC0_ENABLE
|
||
|
#else
|
||
|
#ifdef CONFIG_AU1100
|
||
|
#define ETH0_BASE AU1100_ETH0_BASE
|
||
|
#define MAC0_ENABLE AU1100_MAC0_ENABLE
|
||
|
#else
|
||
|
#ifdef CONFIG_AU1500
|
||
|
#define ETH0_BASE AU1500_ETH0_BASE
|
||
|
#define MAC0_ENABLE AU1500_MAC0_ENABLE
|
||
|
#else
|
||
|
#ifdef CONFIG_AU1550
|
||
|
#define ETH0_BASE AU1550_ETH0_BASE
|
||
|
#define MAC0_ENABLE AU1550_MAC0_ENABLE
|
||
|
#else
|
||
|
#error "No valid cpu set"
|
||
|
#endif
|
||
|
#endif
|
||
|
#endif
|
||
|
#endif
|
||
|
|
||
|
#include <common.h>
|
||
|
#include <malloc.h>
|
||
|
#include <net.h>
|
||
|
#include <command.h>
|
||
|
#include <asm/io.h>
|
||
|
#include <asm/au1x00.h>
|
||
|
|
||
|
#if (CONFIG_COMMANDS & CFG_CMD_MII)
|
||
|
#include <miiphy.h>
|
||
|
#endif
|
||
|
|
||
|
/* Ethernet Transmit and Receive Buffers */
|
||
|
#define DBUF_LENGTH 1520
|
||
|
#define PKT_MAXBUF_SIZE 1518
|
||
|
|
||
|
static char txbuf[DBUF_LENGTH];
|
||
|
|
||
|
static int next_tx;
|
||
|
static int next_rx;
|
||
|
|
||
|
/* 4 rx and 4 tx fifos */
|
||
|
#define NO_OF_FIFOS 4
|
||
|
|
||
|
typedef struct{
|
||
|
u32 status;
|
||
|
u32 addr;
|
||
|
u32 len; /* Only used for tx */
|
||
|
u32 not_used;
|
||
|
} mac_fifo_t;
|
||
|
|
||
|
mac_fifo_t mac_fifo[NO_OF_FIFOS];
|
||
|
|
||
|
#define MAX_WAIT 1000
|
||
|
|
||
|
static int au1x00_send(struct eth_device* dev, volatile void *packet, int length){
|
||
|
volatile mac_fifo_t *fifo_tx =
|
||
|
(volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
|
||
|
int i;
|
||
|
int res;
|
||
|
|
||
|
/* tx fifo should always be idle */
|
||
|
fifo_tx[next_tx].len = length;
|
||
|
fifo_tx[next_tx].addr = (virt_to_phys(packet))|TX_DMA_ENABLE;
|
||
|
au_sync();
|
||
|
|
||
|
udelay(1);
|
||
|
i=0;
|
||
|
while(!(fifo_tx[next_tx].addr&TX_T_DONE)){
|
||
|
if(i>MAX_WAIT){
|
||
|
printf("TX timeout\n");
|
||
|
break;
|
||
|
}
|
||
|
udelay(1);
|
||
|
i++;
|
||
|
}
|
||
|
|
||
|
/* Clear done bit */
|
||
|
fifo_tx[next_tx].addr = 0;
|
||
|
fifo_tx[next_tx].len = 0;
|
||
|
au_sync();
|
||
|
|
||
|
res = fifo_tx[next_tx].status;
|
||
|
|
||
|
next_tx++;
|
||
|
if(next_tx>=NO_OF_FIFOS){
|
||
|
next_tx=0;
|
||
|
}
|
||
|
return(res);
|
||
|
}
|
||
|
|
||
|
static int au1x00_recv(struct eth_device* dev){
|
||
|
volatile mac_fifo_t *fifo_rx =
|
||
|
(volatile mac_fifo_t*)(MAC0_RX_DMA_ADDR+MAC_RX_BUFF0_STATUS);
|
||
|
|
||
|
int length;
|
||
|
u32 status;
|
||
|
|
||
|
for(;;){
|
||
|
if(!(fifo_rx[next_rx].addr&RX_T_DONE)){
|
||
|
/* Nothing has been received */
|
||
|
return(-1);
|
||
|
}
|
||
|
|
||
|
status = fifo_rx[next_rx].status;
|
||
|
|
||
|
length = status&0x3FFF;
|
||
|
|
||
|
if(status&RX_ERROR){
|
||
|
printf("Rx error 0x%x\n", status);
|
||
|
}
|
||
|
else{
|
||
|
/* Pass the packet up to the protocol layers. */
|
||
|
NetReceive(NetRxPackets[next_rx], length - 4);
|
||
|
}
|
||
|
|
||
|
fifo_rx[next_rx].addr = (virt_to_phys(NetRxPackets[next_rx]))|RX_DMA_ENABLE;
|
||
|
|
||
|
next_rx++;
|
||
|
if(next_rx>=NO_OF_FIFOS){
|
||
|
next_rx=0;
|
||
|
}
|
||
|
} /* for */
|
||
|
|
||
|
return(0); /* Does anyone use this? */
|
||
|
}
|
||
|
|
||
|
static int au1x00_init(struct eth_device* dev, bd_t * bd){
|
||
|
|
||
|
volatile u32 *macen = (volatile u32*)MAC0_ENABLE;
|
||
|
volatile u32 *mac_ctrl = (volatile u32*)(ETH0_BASE+MAC_CONTROL);
|
||
|
volatile u32 *mac_addr_high = (volatile u32*)(ETH0_BASE+MAC_ADDRESS_HIGH);
|
||
|
volatile u32 *mac_addr_low = (volatile u32*)(ETH0_BASE+MAC_ADDRESS_LOW);
|
||
|
volatile u32 *mac_mcast_high = (volatile u32*)(ETH0_BASE+MAC_MCAST_HIGH);
|
||
|
volatile u32 *mac_mcast_low = (volatile u32*)(ETH0_BASE+MAC_MCAST_LOW);
|
||
|
volatile mac_fifo_t *fifo_tx =
|
||
|
(volatile mac_fifo_t*)(MAC0_TX_DMA_ADDR+MAC_TX_BUFF0_STATUS);
|
||
|
volatile mac_fifo_t *fifo_rx =
|
||
|
(volatile mac_fifo_t*)(MAC0_RX_DMA_ADDR+MAC_RX_BUFF0_STATUS);
|
||
|
int i;
|
||
|
|
||
|
next_tx = TX_GET_DMA_BUFFER(fifo_tx[0].addr);
|
||
|
next_rx = RX_GET_DMA_BUFFER(fifo_rx[0].addr);
|
||
|
|
||
|
/* We have to enable clocks before releasing reset */
|
||
|
*macen = MAC_EN_CLOCK_ENABLE;
|
||
|
udelay(10);
|
||
|
|
||
|
/* Enable MAC0 */
|
||
|
/* We have to release reset before accessing registers */
|
||
|
*macen = MAC_EN_CLOCK_ENABLE|MAC_EN_RESET0|
|
||
|
MAC_EN_RESET1|MAC_EN_RESET2;
|
||
|
udelay(10);
|
||
|
|
||
|
for(i=0;i<NO_OF_FIFOS;i++){
|
||
|
fifo_tx[i].len = 0;
|
||
|
fifo_tx[i].addr = virt_to_phys(&txbuf[0]);
|
||
|
fifo_rx[i].addr = (virt_to_phys(NetRxPackets[i]))|RX_DMA_ENABLE;
|
||
|
}
|
||
|
|
||
|
/* Put mac addr in little endian */
|
||
|
#define ea eth_get_dev()->enetaddr
|
||
|
*mac_addr_high = (ea[5] << 8) | (ea[4] ) ;
|
||
|
*mac_addr_low = (ea[3] << 24) | (ea[2] << 16) |
|
||
|
(ea[1] << 8) | (ea[0] ) ;
|
||
|
#undef ea
|
||
|
*mac_mcast_low = 0;
|
||
|
*mac_mcast_high = 0;
|
||
|
|
||
|
/* Make sure the MAC buffer is in the correct endian mode */
|
||
|
#ifdef __LITTLE_ENDIAN
|
||
|
*mac_ctrl = MAC_FULL_DUPLEX;
|
||
|
udelay(1);
|
||
|
*mac_ctrl = MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
|
||
|
#else
|
||
|
*mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX;
|
||
|
udelay(1);
|
||
|
*mac_ctrl = MAC_BIG_ENDIAN|MAC_FULL_DUPLEX|MAC_RX_ENABLE|MAC_TX_ENABLE;
|
||
|
#endif
|
||
|
|
||
|
return(1);
|
||
|
}
|
||
|
|
||
|
static void au1x00_halt(struct eth_device* dev){
|
||
|
}
|
||
|
|
||
|
int au1x00_enet_initialize(bd_t *bis){
|
||
|
struct eth_device* dev;
|
||
|
|
||
|
if ((dev = (struct eth_device*)malloc(sizeof *dev)) == NULL) {
|
||
|
puts ("malloc failed\n");
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
memset(dev, 0, sizeof *dev);
|
||
|
|
||
|
sprintf(dev->name, "Au1X00 ethernet");
|
||
|
dev->iobase = 0;
|
||
|
dev->priv = 0;
|
||
|
dev->init = au1x00_init;
|
||
|
dev->halt = au1x00_halt;
|
||
|
dev->send = au1x00_send;
|
||
|
dev->recv = au1x00_recv;
|
||
|
|
||
|
eth_register(dev);
|
||
|
|
||
|
#if (CONFIG_COMMANDS & CFG_CMD_MII)
|
||
|
miiphy_register(dev->name,
|
||
|
au1x00_miiphy_read, au1x00_miiphy_write);
|
||
|
#endif
|
||
|
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
#if (CONFIG_COMMANDS & CFG_CMD_MII)
|
||
|
int au1x00_miiphy_read(char *devname, unsigned char addr,
|
||
|
unsigned char reg, unsigned short * value)
|
||
|
{
|
||
|
volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
|
||
|
volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
|
||
|
u32 mii_control;
|
||
|
unsigned int timedout = 20;
|
||
|
|
||
|
while (*mii_control_reg & MAC_MII_BUSY) {
|
||
|
udelay(1000);
|
||
|
if (--timedout == 0) {
|
||
|
printf("au1x00_eth: miiphy_read busy timeout!!\n");
|
||
|
return -1;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
mii_control = MAC_SET_MII_SELECT_REG(reg) |
|
||
|
MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_READ;
|
||
|
|
||
|
*mii_control_reg = mii_control;
|
||
|
|
||
|
timedout = 20;
|
||
|
while (*mii_control_reg & MAC_MII_BUSY) {
|
||
|
udelay(1000);
|
||
|
if (--timedout == 0) {
|
||
|
printf("au1x00_eth: miiphy_read busy timeout!!\n");
|
||
|
return -1;
|
||
|
}
|
||
|
}
|
||
|
*value = *mii_data_reg;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
int au1x00_miiphy_write(char *devname, unsigned char addr,
|
||
|
unsigned char reg, unsigned short value)
|
||
|
{
|
||
|
volatile u32 *mii_control_reg = (volatile u32*)(ETH0_BASE+MAC_MII_CNTRL);
|
||
|
volatile u32 *mii_data_reg = (volatile u32*)(ETH0_BASE+MAC_MII_DATA);
|
||
|
u32 mii_control;
|
||
|
unsigned int timedout = 20;
|
||
|
|
||
|
while (*mii_control_reg & MAC_MII_BUSY) {
|
||
|
udelay(1000);
|
||
|
if (--timedout == 0) {
|
||
|
printf("au1x00_eth: miiphy_write busy timeout!!\n");
|
||
|
return;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
mii_control = MAC_SET_MII_SELECT_REG(reg) |
|
||
|
MAC_SET_MII_SELECT_PHY(addr) | MAC_MII_WRITE;
|
||
|
|
||
|
*mii_data_reg = value;
|
||
|
*mii_control_reg = mii_control;
|
||
|
return 0;
|
||
|
}
|
||
|
#endif /* CONFIG_COMMANDS & CFG_CMD_MII */
|
||
|
|
||
|
#endif /* CONFIG_AU1X00 */
|