1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-10 08:36:15 +02:00
openwrt-xburst/openwrt/package/linux/kernel-source/arch/mips/brcm-boards/bcm947xx/time.c

118 lines
2.8 KiB
C
Raw Normal View History

/*
* Copyright 2004, Broadcom Corporation
* All Rights Reserved.
*
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
*
* $Id$
*/
#include <linux/config.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/serial_reg.h>
#include <linux/interrupt.h>
#include <asm/addrspace.h>
#include <asm/io.h>
#include <asm/time.h>
#include <typedefs.h>
#include <bcmnvram.h>
#include <sbconfig.h>
#include <sbextif.h>
#include <sbutils.h>
#include <sbmips.h>
/* Global SB handle */
extern void *bcm947xx_sbh;
extern spinlock_t bcm947xx_sbh_lock;
/* Convenience */
#define sbh bcm947xx_sbh
#define sbh_lock bcm947xx_sbh_lock
extern int panic_timeout;
static int watchdog = 0;
static u8 *mcr = NULL;
void __init
bcm947xx_time_init(void)
{
unsigned int hz;
extifregs_t *eir;
/*
* Use deterministic values for initial counter interrupt
* so that calibrate delay avoids encountering a counter wrap.
*/
write_c0_count(0);
write_c0_compare(0xffff);
if (!(hz = sb_mips_clock(sbh)))
hz = 100000000;
printk("CPU: BCM%04x rev %d at %d MHz\n", sb_chip(sbh), sb_chiprev(sbh),
(hz + 500000) / 1000000);
/* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
mips_hpt_frequency = hz / 2;
/* Set watchdog interval in ms */
watchdog = simple_strtoul(nvram_safe_get("watchdog"), NULL, 0);
/* Please set the watchdog to 3 sec if it is less than 3 but not equal to 0 */
if (watchdog > 0) {
if (watchdog < 3000)
watchdog = 3000;
}
/* Set panic timeout in seconds */
panic_timeout = watchdog / 1000;
/* Setup blink */
if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
sbconfig_t *sb = (sbconfig_t *)((unsigned int) eir + SBCONFIGOFF);
unsigned long base = EXTIF_CFGIF_BASE(sb_base(readl(&sb->sbadmatch1)));
mcr = (u8 *) ioremap_nocache(base + UART_MCR, 1);
}
}
static void
bcm947xx_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
/* Generic MIPS timer code */
timer_interrupt(irq, dev_id, regs);
/* Set the watchdog timer to reset after the specified number of ms */
if (watchdog > 0)
sb_watchdog(sbh, WATCHDOG_CLOCK / 1000 * watchdog);
#ifdef CONFIG_HWSIM
(*((int *)0xa0000f1c))++;
#else
/* Blink one of the LEDs in the external UART */
if (mcr && !(jiffies % (HZ/2)))
writeb(readb(mcr) ^ UART_MCR_OUT2, mcr);
#endif
}
static struct irqaction bcm947xx_timer_irqaction = {
bcm947xx_timer_interrupt,
SA_INTERRUPT,
0,
"timer",
NULL,
NULL
};
void __init
bcm947xx_timer_setup(struct irqaction *irq)
{
/* Enable the timer interrupt */
setup_irq(7, &bcm947xx_timer_irqaction);
}