1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-03 01:46:16 +02:00
openwrt-xburst/docs/network-scripts.tex

55 lines
2.0 KiB
TeX
Raw Normal View History

\subsubsection{Using the network scripts}
To be able to access the network functions, you need to include
the necessary shell scripts by running:
\begin{Verbatim}
. /etc/functions.sh # common functions
include /lib/network # include /lib/network/*.sh
scan_interfaces # read and parse the network config
\end{Verbatim}
Some protocols, such as PPP might change the configured interface names
at run time (e.g. \texttt{eth0} => \texttt{ppp0} for PPPoE). That's why you have to run
\texttt{scan\_interfaces} instead of reading the values from the config directly.
After running \texttt{scan\_interfaces}, the \texttt{'ifname'} option will always contain
the effective interface name (which is used for IP traffic) and if the
physical device name differs from it, it will be stored in the \texttt{'device'}
option.
That means that running \texttt{config\_get lan ifname}
after \texttt{scan\_interfaces} might not return the same result as running it before.
After running \texttt{scan\_interfaces}, the following functions are available:
\begin{itemize}
\item{\texttt{find\_config \textit{interface}}} \\
looks for a network configuration that includes
the specified network interface.
\item{\texttt{setup\_interface \textit{interface [config] [protocol]}}} \\
will set up the specified interface, optionally overriding the network configuration
name or the protocol that it uses.
\end{itemize}
\subsubsection{Writing protocol handlers}
You can add custom protocol handlers by adding shell scripts to
\texttt{/lib/network}. They provide the following two shell functions:
\begin{Verbatim}
scan_<protocolname>() {
local config="$1"
# change the interface names if necessary
}
setup_interface_<protocolname>() {
local interface="$1"
local config="$2"
# set up the interface
}
\end{Verbatim}
\texttt{scan\_\textit{protocolname}} is optional and only necessary if your protocol
uses a custom device, e.g. a tunnel or a PPP device.