openwrt-xburst/target/linux/pxa/patches-2.6.21/035-pxafb-definition.patch

Index: linux-2.6.21.7/arch/arm/mach-pxa/gumstix.c
===================================================================
--- linux-2.6.21.7.orig/arch/arm/mach-pxa/gumstix.c
+++ linux-2.6.21.7/arch/arm/mach-pxa/gumstix.c
@@ -25,6 +25,7 @@
 #include <asm/arch/udc.h>
 #include <asm/arch/mmc.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/pxafb.h>
 #include <asm/arch/gumstix.h>
 
 #include "generic.h"
@@ -90,6 +91,89 @@ static struct platform_device gum_audio_
 	.id		= -1,
 };
 
+
+#if defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) || defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
+static void gumstix_lcd_backlight(int on_or_off)
+{
+	if(on_or_off)
+	{
+		pxa_gpio_mode(17 | GPIO_IN);
+	} else {
+		GPCR(17) = GPIO_bit(17);
+		pxa_gpio_mode(17 | GPIO_OUT);
+		GPCR(17) = GPIO_bit(17);
+	}
+}
+#endif
+
+
+#ifdef CONFIG_FB_PXA_ALPS_CDOLLAR
+static struct pxafb_mode_info gumstix_fb_mode = {
+	.pixclock	= 300000,
+	.xres		= 240,
+	.yres		= 320,
+	.bpp		= 16,
+	.hsync_len	= 2,
+	.left_margin	= 1,
+	.right_margin	= 1,
+	.vsync_len	= 3,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info gumstix_fb_info = {
+	.modes		= &gumstix_fb_mode,
+	.num_modes	= 1,
+	.lccr0		= LCCR0_Pas | LCCR0_Sngl | LCCR0_Color,
+	.lccr3		= 0,
+};
+#elif defined(CONFIG_FB_PXA_SHARP_LQ043_PSP)
+static struct pxafb_mode_info gumstix_fb_mode = {
+	.pixclock	= 110000,
+	.xres		= 480,
+	.yres		= 272,
+	.bpp		= 16,
+	.hsync_len	= 41,
+	.left_margin	= 2,
+	.right_margin	= 2,
+	.vsync_len	= 10,
+	.upper_margin	= 2,
+	.lower_margin	= 2,
+	.sync		= 0, // Hsync and Vsync both active low
+};
+
+static struct pxafb_mach_info gumstix_fb_info = {
+	.modes			= &gumstix_fb_mode,
+	.num_modes		= 1,
+	.lccr0			= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
+	.lccr3			= LCCR3_OutEnH | LCCR3_PixFlEdg | (3 << 30),
+	.pxafb_backlight_power	= &gumstix_lcd_backlight,
+};
+#elif defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
+static struct pxafb_mode_info gumstix_fb_mode = {
+	.pixclock	= 108696, // 9.2MHz typical DOTCLK from datasheet
+	.xres		= 480,
+	.hsync_len	= 41, // HLW from datasheet: 41 typ
+	.left_margin	= 4, // HBP - HLW from datasheet: 45 - 41 = 4
+	.right_margin	= 8, // HFP from datasheet: 8 typ
+	.yres		= 272,
+	.vsync_len	= 10, // VLW from datasheet: 10 typ
+	.upper_margin	= 2, // VBP - VLW from datasheet: 12 - 10 = 2
+	.lower_margin	= 4, // VFP from datasheet: 4 typ
+	.bpp		= 16,
+	.sync		= 0, // Hsync and Vsync both active low
+};
+
+static struct pxafb_mach_info gumstix_fb_info = {
+	.modes			= &gumstix_fb_mode,
+	.num_modes		= 1,
+	.lccr0			= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
+	.lccr3			= LCCR3_OutEnH | LCCR3_PixFlEdg | (3 << 30),
+	.pxafb_backlight_power	= &gumstix_lcd_backlight,
+};
+#endif
+
 static struct platform_device *devices[] __initdata = {
 	&gum_audio_device,
 };
@@ -98,6 +182,9 @@ static void __init gumstix_init(void)
 {
 	pxa_set_mci_info(&gumstix_mci_platform_data);
 	pxa_set_udc_info(&gumstix_udc_info);
+#if defined(CONFIG_FB_PXA_ALPS_CDOLLAR) | defined(CONFIG_FB_PXA_SHARP_LQ043_PSP) | defined(CONFIG_FB_PXA_SAMSUNG_LTE430WQ_F0C)
+	set_pxa_fb_info(&gumstix_fb_info);
+#endif
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
Index: linux-2.6.21.7/drivers/video/Kconfig
===================================================================
--- linux-2.6.21.7.orig/drivers/video/Kconfig
+++ linux-2.6.21.7/drivers/video/Kconfig
@@ -1495,6 +1495,37 @@ config FB_PXA
 
 	  If unsure, say N.
 
+choice
+	depends on FB_PXA
+	prompt "LCD Panel"
+	default FB_PXA_SAMSUNG_LTE430WQ_F0C
+
+config FB_PXA_ALPS_CDOLLAR
+	boolean "Chris Dollar's ALPS screen"
+	---help---
+	  Enable definitions (over-ridable on the kernel command line if
+	  "PXA LCD command line parameters" is also selected) for an ALPS
+	  screen which Chris Dollar uses
+
+config FB_PXA_SHARP_LQ043_PSP
+	boolean "SHARP LQ043... series"
+	---help---
+	  Enable definitions (over-ridable on the kernel command line if
+	  "PXA LCD command line parameters" is also selected) for a SHARP
+	  LQ043... screen, such as the one used by the PSP.  These screens are
+	  the ones normally sold by gumstix with its boards.
+
+config FB_PXA_SAMSUNG_LTE430WQ_F0C
+	boolean "Samsung LTE430WQ-F0C (standard gumstix LCD)"
+	---help---
+	  Enable definitions for a Samsung LTE430WQ-F0C LCD panel, such as the ones resold
+	  by gumstix for use with their "LCD-Ready" boards.
+
+config FB_PXA_NONEOFTHEABOVE
+	boolean "None of the above"
+
+endchoice
+
 config FB_PXA_PARAMETERS
 	bool "PXA LCD command line parameters"
 	default n
Index: linux-2.6.21.7/drivers/video/pxafb.c
===================================================================
--- linux-2.6.21.7.orig/drivers/video/pxafb.c
+++ linux-2.6.21.7/drivers/video/pxafb.c
@@ -22,6 +22,7 @@
  *
  */
 
+#include <linux/autoconf.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/kernel.h>
@@ -789,7 +790,13 @@ static void pxafb_setup_gpio(struct pxaf
 	pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
 	pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
 	pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
+#ifdef CONFIG_FB_PXA_SHARP_LQ043_PSP
+	/* DISP must be always high while screen is on */
+	pxa_gpio_mode(GPIO77_LCD_ACBIAS | GPIO_OUT);
+	GPSR(GPIO77_LCD_ACBIAS) = GPIO_bit(GPIO77_LCD_ACBIAS);
+#else
 	pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+#endif
 }
 
 static void pxafb_enable_controller(struct pxafb_info *fbi)