qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-27 23:29:22 +02:00
Code

[kirkwood] Use kirkwood_nand_init instead of manually registering the nand driver

Browse Source 
This fixes that the device would hang during boot.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22837 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
lars 2010-08-29 21:10:59 +00:00
parent fd9a76005d
commit 02a00e24a8
1 changed files with 4 additions and 31 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
target/linux/kirkwood/patches/100-dockstar.patch
View File

@ -38,7 +38,7 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
--- /dev/null
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -0,0 +1,148 @@
@@ -0,0 +1,121 @@
+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
@ -61,7 +61,6 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include <plat/orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+
@ -81,7 +80,7 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_64M,
+ .size = SZ_32M,
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
@ -89,33 +88,6 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
+ },
+};
+
+static struct resource dockstar_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data dockstar_nand_data = {
+ .parts = dockstar_nand_parts,
+ .nr_parts = ARRAY_SIZE(dockstar_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+ .chip_delay = 25,
+};
+
+static struct platform_device dockstar_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &dockstar_nand_data,
+ },
+ .resource = &dockstar_nand_resource,
+ .num_resources = 1,
+};
+
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
@ -172,9 +144,10 @@ Signed-off-by: Eric Cooper <ecc@xxxxxxx>
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_nand_init(ARRAY_AND_SIZE(dockstar_nand_parts), 25);
+
+ kirkwood_ge00_init(&dockstar_ge00_data);
+
+ platform_device_register(&dockstar_nand_flash);
+ platform_device_register(&dockstar_leds);
+}
+