qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-11-23 23:16:16 +02:00
Code

Asus WL-330gE Support

Browse Source 
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.

Signed-off-by: David Cooper <dave@kupesoft.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@14624 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
nbd 2009-02-22 18:45:39 +00:00
parent 05c2bdffe4
commit 03c1e266f1
2 changed files with 37 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
package/broadcom-diag/src/diag.c
View File

@ -68,6 +68,7 @@ enum {
WLHDD, WLHDD,
WL300G, WL300G,
WL320GE, WL320GE,
WL330GE,
WL500G, WL500G,
WL500GD, WL500GD,
WL500GP, WL500GP,
@ -307,6 +308,15 @@ static struct platform_t __initdata platforms[] = {
{ .name = "link", .gpio = 1 << 11, .polarity = REVERSE }, { .name = "link", .gpio = 1 << 11, .polarity = REVERSE },
}, },
}, },
[WL330GE] = {
.name = "ASUS WL-330gE",
.buttons = {
{ .name = "reset", .gpio = 1 << 2 },
},
.leds = {
{ .name = "power", .gpio = 1 << 0, .polarity = REVERSE },
},
},
[WL500G] = { [WL500G] = {
.name = "ASUS WL-500g", .name = "ASUS WL-500g",
.buttons = { .buttons = {
@ -764,6 +774,8 @@ static struct platform_t __init *platform_detect(void)
return &platforms[WL520GC]; return &platforms[WL520GC];
if (startswith(buf,"WL520GU-")) /* WL520GU-* */ if (startswith(buf,"WL520GU-")) /* WL520GU-* */
return &platforms[WL520GU]; return &platforms[WL520GU];
if (startswith(buf,"WL330GE-")) /* WL330GE-* */
return &platforms[WL330GE];
} }
/* Based on "ModelId" */ /* Based on "ModelId" */

36
target/linux/brcm-2.4/base-files/etc/init.d/netconfig
View File

@ -57,6 +57,12 @@ start() {
c["wan_ifname"] = "" c["wan_ifname"] = ""
c["lan_ifname"] = "eth1" c["lan_ifname"] = "eth1"
} }
if (model == "ASUS WL-330gE") {
c["wan_ifname"] = ""
c["lan_ifname"] = "eth0"
c["vlan0ports"] = ""
c["vlan1ports"] = ""
}
if (model == "ASUS WL-500g") { if (model == "ASUS WL-500g") {
c["wan_ifname"] = "eth1" c["wan_ifname"] = "eth1"
c["lan_ifname"] = "eth0" c["lan_ifname"] = "eth0"
@ -149,12 +155,14 @@ start() {
c["vlan1ports"] = "" c["vlan1ports"] = ""
} }
print "#### VLAN configuration " if (c["vlan0ports"] || c["vlan1ports"]) {
print "config switch eth0" print "#### VLAN configuration "
p("vlan0", "vlan0ports") print "config switch eth0"
p("vlan1", "vlan1ports") p("vlan0", "vlan0ports")
print "" p("vlan1", "vlan1ports")
print "" print ""
print ""
}
print "#### Loopback configuration" print "#### Loopback configuration"
print "config interface loopback" print "config interface loopback"
print " option ifname \"lo\"" print " option ifname \"lo\""
@ -173,10 +181,16 @@ start() {
print " option netmask 255.255.255.0" print " option netmask 255.255.255.0"
print "" print ""
print "" print ""
print "#### WAN configuration" if (c["wan_ifname"]) {
print "config interface wan" print "#### WAN configuration"
p("ifname", "wan_ifname") print "config interface wan"
p("macaddr", "wan_macaddr") p("ifname", "wan_ifname")
print " option proto dhcp" p("macaddr", "wan_macaddr")
print " option proto dhcp"
} else {
print "#### WAN configuration (disabled)"
print "#config interface wan"
print "# option proto dhcp"
}
}' > /etc/config/network }' > /etc/config/network
} }