Add rt2x00-mac80211 snapshot (#1916)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8184 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/rt2x00/src/rt2x00usb.h

@@ -0,0 +1,132 @@
+/*
+	Copyright (C) 2004 - 2007 rt2x00 SourceForge Project
+	<http://rt2x00.serialmonkey.com>
+
+	This program is free software; you can redistribute it and/or modify
+	it under the terms of the GNU General Public License as published by
+	the Free Software Foundation; either version 2 of the License, or
+	(at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty of
+	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+	GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public License
+	along with this program; if not, write to the
+	Free Software Foundation, Inc.,
+	59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ */
+
+/*
+	Module: rt2x00usb
+	Abstract: Data structures for the rt2x00usb module.
+	Supported chipsets: rt2570, rt2571W & rt2671.
+ */
+
+#ifndef RT2X00USB_H
+#define RT2X00USB_H
+
+/*
+ * This variable should be used with the
+ * usb_driver structure initialization.
+ */
+#define USB_DEVICE_DATA(__ops)	.driver_info = (kernel_ulong_t)(__ops)
+
+/*
+ * Register defines.
+ * When register access attempts should be repeated
+ * only REGISTER_BUSY_COUNT attempts with a delay
+ * of REGISTER_BUSY_DELAY us should be taken.
+ * For USB vendor requests we need to pass a timeout
+ * time in ms, for this we use the REGISTER_TIMEOUT,
+ * however when loading firmware a higher value is
+ * required. For that we use the REGISTER_TIMEOUT_FIRMWARE.
+ */
+#define REGISTER_BUSY_COUNT		5
+#define REGISTER_BUSY_DELAY		100
+#define REGISTER_TIMEOUT		20
+#define REGISTER_TIMEOUT_FIRMWARE	1000
+
+/*
+ * USB request types.
+ */
+#define USB_VENDOR_REQUEST	( USB_TYPE_VENDOR | USB_RECIP_DEVICE )
+#define USB_VENDOR_REQUEST_IN	( USB_DIR_IN | USB_VENDOR_REQUEST )
+#define USB_VENDOR_REQUEST_OUT	( USB_DIR_OUT | USB_VENDOR_REQUEST )
+
+/*
+ * USB vendor commands.
+ */
+#define USB_DEVICE_MODE		0x01
+#define USB_SINGLE_WRITE	0x02
+#define USB_SINGLE_READ		0x03
+#define USB_MULTI_WRITE		0x06
+#define USB_MULTI_READ		0x07
+#define USB_EEPROM_WRITE	0x08
+#define USB_EEPROM_READ		0x09
+#define USB_LED_CONTROL		0x0a	/* RT73USB */
+#define USB_RX_CONTROL		0x0c
+
+/*
+ * Device modes offset
+ */
+#define USB_MODE_RESET		0x01
+#define USB_MODE_UNPLUG		0x02
+#define USB_MODE_FUNCTION	0x03
+#define USB_MODE_TEST		0x04
+#define USB_MODE_SLEEP		0x07	/* RT73USB */
+#define USB_MODE_FIRMWARE	0x08	/* RT73USB */
+#define USB_MODE_WAKEUP		0x09	/* RT73USB */
+
+/*
+ * USB devices need an additional Beacon (guardian beacon) to be generated.
+ */
+#undef BEACON_ENTRIES
+#define BEACON_ENTRIES 2
+
+/*
+ * Interfacing with the HW.
+ */
+int rt2x00usb_vendor_request(const struct rt2x00_dev *rt2x00dev,
+	const u8 request, const u8 type, const u16 offset,
+	u32 value, void *buffer, const u16 buffer_length, const u16 timeout);
+
+/*
+ * Radio handlers
+ */
+void rt2x00usb_enable_radio(struct rt2x00_dev *rt2x00dev);
+void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev);
+
+/*
+ * Beacon handlers.
+ */
+int rt2x00usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
+	struct ieee80211_tx_control *control);
+void rt2x00usb_beacondone(struct urb *urb);
+
+/*
+ * TX data handlers.
+ */
+int rt2x00usb_write_tx_data(struct rt2x00_dev *rt2x00dev,
+	struct data_ring *ring, struct sk_buff *skb,
+	struct ieee80211_tx_control *control);
+
+/*
+ * Device initialization handlers.
+ */
+int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev);
+void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev);
+
+/*
+ * USB driver handlers.
+ */
+int rt2x00usb_probe(struct usb_interface *usb_intf,
+	const struct usb_device_id *id);
+void rt2x00usb_disconnect(struct usb_interface *usb_intf);
+#ifdef CONFIG_PM
+int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state);
+int rt2x00usb_resume(struct usb_interface *usb_intf);
+#endif /* CONFIG_PM */
+
+#endif /* RT2X00USB_H */