Merge branch 'master' of projects.qi-hardware.com:openwrt-xburst

Config.in

@@ -126,6 +126,10 @@ menu "Global build settings"
 
 	comment "General build options"
 
+	config DISPLAY_SUPPORT
+		bool "Show packages that require graphics support (local or remote)"
+		default n
+
 	config BUILD_PATENTED
 		default y
 		bool "Compile with support for patented functionality"

include/package-defaults.mk

@@ -23,6 +23,11 @@ define Package/Default
   else
     VERSION:=$(PKG_RELEASE)
   endif
+  ifneq ($(PKG_FLAGS),)
+    PKGFLAGS:=$(PKG_FLAGS)
+  else
+    PKGFLAGS:=
+  endif
   ifneq ($(ARCH_PACKAGES),)
     PKGARCH:=$(ARCH_PACKAGES)
   else

include/package-ipkg.mk

@@ -49,6 +49,7 @@ ifeq ($(DUMP),)
     IPKG_$(1):=$(PACKAGE_DIR)/$(1)_$(VERSION)_$(PKGARCH).ipk
     IDIR_$(1):=$(PKG_BUILD_DIR)/ipkg-$(PKGARCH)/$(1)
     INFO_$(1):=$(IPKG_STATE_DIR)/info/$(1).list
+    KEEP_$(1):=$(strip $(call Package/$(1)/conffiles))
 
     ifeq ($(if $(VARIANT),$(BUILD_VARIANT)),$(VARIANT))
     ifdef Package/$(1)/install
@@ -98,6 +99,8 @@ ifeq ($(DUMP),)
 		echo "Provides: $(PROVIDES)"; \
 		echo "Source: $(SOURCE)"; \
 		echo "Section: $(SECTION)"; \
+		echo "Status: unknown $(if $(filter hold,$(PKG_FLAGS)),hold,ok) not-installed"; \
+		echo "Essential: $(if $(filter essential,$(PKG_FLAGS)),yes,no)"; \
 		echo "Priority: $(PRIORITY)"; \
 		echo "Maintainer: $(MAINTAINER)"; \
 		echo "Architecture: $(PKGARCH)"; \
@@ -114,12 +117,27 @@ ifeq ($(DUMP),)
 	$(RSTRIP) $$(IDIR_$(1))
 	SIZE=`cd $$(IDIR_$(1)); du -bs --exclude=./CONTROL . 2>/dev/null | cut -f1`; \
 	$(SED) "s|^\(Installed-Size:\).*|\1 $$$$SIZE|g" $$(IDIR_$(1))/CONTROL/control
+
+    ifneq ($$(KEEP_$(1)),)
+		@( \
+			keepfiles=""; \
+			for x in $$(KEEP_$(1)); do \
+				[ -f "$$(IDIR_$(1))/$$$$x" ] || keepfiles="$$$${keepfiles:+$$$$keepfiles }$$$$x"; \
+			done; \
+			[ -z "$keepfiles" ] || { \
+				mkdir -p $$(IDIR_$(1))/lib/upgrade/keep.d; \
+				for x in $$$$keepfiles; do echo $$$$x >> $$(IDIR_$(1))/lib/upgrade/keep.d/$(1); done; \
+			}; \
+		)
+    endif
+
 	$(IPKG_BUILD) $$(IDIR_$(1)) $(PACKAGE_DIR)
 	@[ -f $$(IPKG_$(1)) ] || false 
 
     $$(INFO_$(1)): $$(IPKG_$(1))
 	@[ -d $(TARGET_DIR)/tmp ] || mkdir -p $(TARGET_DIR)/tmp
 	$(OPKG) install $$(IPKG_$(1))
+	$(if $(filter-out essential,$(PKG_FLAGS)),for flag in $(filter-out essential,$(PKG_FLAGS)); do $(OPKG) flag $$$$flag $(1); done)
 
     $(1)-clean:
 	rm -f $(PACKAGE_DIR)/$(1)_*

include/package.mk

@@ -21,6 +21,8 @@ STAMP_CONFIGURED:=$(PKG_BUILD_DIR)/.configured$(if $(DUMP),,_$(call confvar,$(PK
 STAMP_BUILT:=$(PKG_BUILD_DIR)/.built
 STAMP_INSTALLED:=$(STAGING_DIR)/stamp/.$(PKG_NAME)_installed
 
+STAGING_FILES_LIST:=$(PKG_NAME)$(if $(BUILD_VARIANT),.$(BUILD_VARIANT),).list
+
 include $(INCLUDE_DIR)/download.mk
 include $(INCLUDE_DIR)/quilt.mk
 include $(INCLUDE_DIR)/package-defaults.mk
@@ -125,7 +127,7 @@ define Build/DefaultTargets
 		$(call $(hook),$(TMP_DIR)/stage-$(PKG_NAME),$(TMP_DIR)/stage-$(PKG_NAME)/host)$(sep)\
 	)
 	if [ -d $(TMP_DIR)/stage-$(PKG_NAME) ]; then \
-		(cd $(TMP_DIR)/stage-$(PKG_NAME); find ./ > $(STAGING_DIR)/packages/$(PKG_NAME).list); \
+		(cd $(TMP_DIR)/stage-$(PKG_NAME); find ./ > $(STAGING_DIR)/packages/$(STAGING_FILES_LIST)); \
 		$(CP) $(TMP_DIR)/stage-$(PKG_NAME)/* $(STAGING_DIR)/; \
 	fi
 	rm -rf $(TMP_DIR)/stage-$(PKG_NAME)
@@ -213,15 +215,15 @@ clean-staging: FORCE
 	rm -f $(STAMP_INSTALLED)
 	@-(\
 		cd "$(STAGING_DIR)"; \
-		if [ -f packages/$(PKG_NAME).list ]; then \
+		if [ -f packages/$(STAGING_FILES_LIST) ]; then \
-			cat packages/$(PKG_NAME).list | xargs -r rm -f 2>/dev/null; \
+			cat packages/$(STAGING_FILES_LIST) | xargs -r rm -f 2>/dev/null; \
 		fi; \
 	)
 
 clean: clean-staging FORCE
 	$(call Build/UninstallDev,$(STAGING_DIR),$(STAGING_DIR_HOST))
 	$(Build/Clean)
-	rm -f $(STAGING_DIR)/packages/$(PKG_NAME).list $(STAGING_DIR_HOST)/packages/$(PKG_NAME).list
+	rm -f $(STAGING_DIR)/packages/$(STAGING_FILES_LIST) $(STAGING_DIR_HOST)/packages/$(STAGING_FILES_LIST)
 	rm -rf $(PKG_BUILD_DIR)
 
 dist:

include/toplevel.mk

@@ -42,6 +42,8 @@ endif
 SCAN_COOKIE?=$(shell echo $$$$)
 export SCAN_COOKIE
 
+SUBMAKE:=umask 022; $(SUBMAKE)
+
 prepare-mk: FORCE ;
 
 prepare-tmpinfo: FORCE

package/6in4/Makefile

@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=6in4
-PKG_VERSION:=6
+PKG_VERSION:=7
 PKG_RELEASE:=1
 
 include $(INCLUDE_DIR)/package.mk

package/6in4/files/6in4.hotplug

@@ -17,11 +17,9 @@ if [ "$ACTION" = ifup ]; then
 		config_get wandev "$cfg" wan_device "$(find_6in4_wanif)"
 		[ "$wandev" = "$DEVICE" ] || return 0
 
-		local oldip
 		local wanip=$(find_6in4_wanip "$wandev")
-		config_get oldip "$cfg" ipaddr
 
-		[ -n "$wanip" ] && [ "$oldip" != "$wanip" ] && {
+		[ -n "$wanip" ] && {
 			local tunnelid
 			config_get tunnelid "$cfg" tunnelid
 
@@ -37,7 +35,22 @@ if [ "$ACTION" = ifup ]; then
 				}
 				uci_set_state network "$cfg" ipaddr "$wanip"
 
-				( wget -qO/dev/null "http://ipv4.tunnelbroker.net/ipv4_end.php?ipv4b=AUTO&user_id=$username&pass=$password&tunnel_id=$tunnelid" && ifup "$cfg" )&
+				(
+					local url="http://ipv4.tunnelbroker.net/ipv4_end.php?ipv4b=AUTO&user_id=$username&pass=$password&tunnel_id=$tunnelid"
+					local try=0
+					local max=3
+
+					while [ $((++try)) -le $max ]; do
+						wget -qO/dev/null "$url" 2>/dev/null && {
+							logger -t 6in4-update "Updated tunnel #$tunnelid endpoint to $wanip"
+							ifup "$cfg"
+							break
+						} || {
+							logger -t 6in4-update "Try $try/$max failed, retrying"
+							sleep 1
+						}
+					done
+				)&
 			}
 		}
 	}

package/Makefile

@@ -17,7 +17,7 @@ else
   $(curdir)/builddirs-install:=. $(sort $(package-y))
 endif
 ifneq ($(IGNORE_ERRORS),)
-  $(curdir)/builddirs-ignore-compile:= $(if $(filter m y, $(IGNORE_ERRORS)),$(foreach m,$(IGNORE_ERRORS),$(package-$(m))),$(package-m))
+  $(curdir)/builddirs-ignore-compile:= $(if $(filter n m y, $(IGNORE_ERRORS)),$(foreach m,$(IGNORE_ERRORS),$(package-$(subst n,,$(m)))),$(package-m) $(package-))
 endif
 
 $(curdir)/install:=$(curdir)/install-cleanup

package/acx/files/lib/wifi/acx.sh

@@ -185,7 +185,7 @@ detect_acx() {
 		cat <<EOF
 config wifi-device  $dev
 	option type     acx
-	option channel  5
+	option channel  11
 
 	# REMOVE THIS LINE TO ENABLE WIFI:
 	option disabled 1

package/base-files/Makefile

@@ -10,7 +10,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=base-files
-PKG_RELEASE:=43.3
+PKG_RELEASE:=43.8
 
 PKG_FILE_DEPENDS:=$(PLATFORM_DIR)/ $(GENERIC_PLATFORM_DIR)/base-files/
 PKG_BUILD_DEPENDS:=opkg/host
@@ -50,9 +50,14 @@ define Package/base-files/conffiles
 /etc/inittab
 /etc/group
 /etc/passwd
+/etc/shadow
 /etc/profile
 /etc/shells
 /etc/sysctl.conf
+/etc/rc.local
+/etc/sysupgrade.conf
+/etc/config/
+/etc/dropbear/
 $(call $(TARGET)/conffiles)
 endef
 
@@ -159,6 +164,7 @@ ifneq ($(TARGET_avr32)$(TARGET_coldfire),)
   DEPENDS:=+libgcc
 endif
   URL:=$(LIBC_URL)
+  PKG_FLAGS:=hold essential
 endef
 
 

package/base-files/files/bin/login.sh

@@ -1,18 +1,16 @@
 #!/bin/sh
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
 
-grep '^root:[^!]' /etc/passwd >&- 2>&-
+if grep -qs '^root:[^!]' /etc/passwd /etc/shadow && [ -z "$FAILSAFE" ]; then
-[ "$?" = "0" -a -z "$FAILSAFE" ]  &&  
+	echo "Login failed."
-{
+	exit 0
-    echo "Login failed."
+else
-    exit 0
-} || {
 cat << EOF
  === IMPORTANT ============================
   Use 'passwd' to set your login password
   this will disable telnet and enable SSH
  ------------------------------------------
 EOF
-}
+fi
 
 exec /bin/ash --login

package/base-files/files/etc/functions.sh

@@ -274,4 +274,42 @@ uci_apply_defaults() {
 	uci commit
 }
 
+service_kill() {
+	local name="${1}"
+	local pid="${2:-$(pidof "$name")}"
+	local grace="${3:-5}"
+
+	[ -f "$pid" ] && pid="$(head -n1 "$pid" 2>/dev/null)"
+
+	for pid in $pid; do
+		[ -d "/proc/$pid" ] || continue
+		local try=0
+		kill -TERM $pid 2>/dev/null && \
+			while grep -qs "$name" "/proc/$pid/cmdline" && [ $((try++)) -lt $grace ]; do sleep 1; done
+		kill -KILL $pid 2>/dev/null && \
+			while grep -qs "$name" "/proc/$pid/cmdline"; do sleep 1; done
+	done
+}
+
+
+pi_include() {
+	if [ -f "/tmp/overlay/$1" ]; then
+		. "/tmp/overlay/$1"
+	elif [ -f "$1" ]; then
+		. "$1"
+	elif [ -d "/tmp/overlay/$1" ]; then
+		for src_script in /tmp/overlay/$1/*.sh; do
+			. "$src_script"
+		done
+	elif [ -d "$1" ]; then
+		for src_script in $1/*.sh; do
+			. "$src_script"
+		done
+	else
+		echo "WARNING: $1 not found"
+		return 1
+	fi
+	return 0
+}
+
 [ -z "$IPKG_INSTROOT" -a -f /lib/config/uci.sh ] && . /lib/config/uci.sh

package/base-files/files/etc/preinit

@@ -5,12 +5,6 @@
 export PATH=/bin:/sbin:/usr/bin:/usr/sbin
 . /etc/diag.sh
 
-preinit_essential_hook=
-preinit_main_hook=
-failsafe_hook=
-initramfs_hook=
-preinit_mount_root_hook=
-
 pi_ifname=
 pi_ip=192.168.1.1
 pi_broadcast=192.168.1.255
@@ -28,8 +22,14 @@ pi_init_suppress_stderr="y"
 pi_init_path="/bin:/sbin:/usr/bin:/usr/sbin"
 pi_init_cmd="/sbin/init"
 
+. /etc/functions.sh
 . /lib/functions/boot.sh
 
+boot_hook_init preinit_essential
+boot_hook_init preinit_main
+boot_hook_init failsafe
+boot_hook_init initramfs
+boot_hook_init preinit_mount_root
 
 for pi_source_file in /lib/preinit/*; do
     . $pi_source_file

package/base-files/files/etc/sysupgrade.conf

@@ -0,0 +1,5 @@
+## This file contains files and directories that should
+## be preserved during an upgrade.
+
+# /etc/example.conf
+# /etc/openvpn/

package/base-files/files/lib/functions/boot.sh

@@ -6,19 +6,66 @@ mount() {
 	/bin/busybox mount "$@"
 }
 
+boot_hook_splice_start() {
+	export -n PI_HOOK_SPLICE=1
+}
+
+boot_hook_splice_finish() {
+	local hook
+	for hook in $PI_STACK_LIST; do
+		local v; eval "v=\${${hook}_splice:+\$${hook}_splice }$hook"
+		export -n "${hook}=${v% }"
+		export -n "${hook}_splice="
+	done
+	export -n PI_HOOK_SPLICE=
+}
+
+boot_hook_init() {
+	local hook="${1}_hook"
+	export -n "PI_STACK_LIST=${PI_STACK_LIST:+$PI_STACK_LIST }$hook"
+	export -n "$hook="
+}
+
 boot_hook_add() {
-    	local hook="${1}_hook"
+	local hook="${1}_hook${PI_HOOK_SPLICE:+_splice}"
-	local value="$2"
+	local func="${2}"
-	local sep=" "
+
-	
+	[ -n "$func" ] && {
-	eval "$hook=\"\${$hook:+\${$hook}\${value:+\$sep}}\$value\""
+		local v; eval "v=\$$hook"
+		export -n "$hook=${v:+$v }$func"
+	}
+}
+
+boot_hook_shift() {
+	local hook="${1}_hook"
+	local rvar="${2}"
+
+	local v; eval "v=\$$hook"
+	[ -n "$v" ] && {
+		local first="${v%% *}"
+
+		[ "$v" != "${v#* }" ] && \
+			export -n "$hook=${v#* }" || \
+			export -n "$hook="
+
+		export -n "$rvar=$first"
+		return 0
+	}
+
+	return 1
 }
 
 boot_run_hook() {
-    local boot_func
+	local hook="$1"
-    for boot_func in $(eval "echo \"\$${1}_hook\""); do
+	local func
-	$boot_func "$1" "$2"
+
-    done
+	while boot_hook_shift "$hook" func; do
+		local ran; eval "ran=\$PI_RAN_$func"
+		[ -n "$ran" ] || {
+			export -n "PI_RAN_$func=1"
+			$func "$1" "$2"
+		}
+	done
 }
 
 find_mtd_part() {
@@ -95,6 +142,7 @@ fopivot() { # <rw_root> <ro_root> <dupe?>
 
 ramoverlay() {
 	mkdir -p /tmp/root
-	mount -t tmpfs root /tmp/root
+	mount -t tmpfs -o mode=0755 root /tmp/root
 	fopivot /tmp/root /rom 1
 }
+

package/base-files/files/lib/network/config.sh

@@ -339,40 +339,34 @@ setup_interface() {
 			setup_interface_static "$iface" "$config"
 		;;
 		dhcp)
-			local lockfile="/var/lock/dhcp-$iface"
+			# kill running udhcpc instance
-			lock "$lockfile"
-
-			# prevent udhcpc from starting more than once
 			local pidfile="/var/run/dhcp-${iface}.pid"
-			local pid="$(cat "$pidfile" 2>/dev/null)"
+			service_kill udhcpc "$pidfile"
-			if [ -d "/proc/$pid" ] && grep -qs udhcpc "/proc/${pid}/cmdline"; then
-				lock -u "$lockfile"
-			else
-				local ipaddr netmask hostname proto1 clientid broadcast
-				config_get ipaddr "$config" ipaddr
-				config_get netmask "$config" netmask
-				config_get hostname "$config" hostname
-				config_get proto1 "$config" proto
-				config_get clientid "$config" clientid
-				config_get_bool broadcast "$config" broadcast 0
 
-				[ -z "$ipaddr" ] || \
+			local ipaddr netmask hostname proto1 clientid vendorid broadcast
-					$DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
+			config_get ipaddr "$config" ipaddr
+			config_get netmask "$config" netmask
+			config_get hostname "$config" hostname
+			config_get proto1 "$config" proto
+			config_get clientid "$config" clientid
+			config_get vendorid "$config" vendorid
+			config_get_bool broadcast "$config" broadcast 0
 
-				# don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
+			[ -z "$ipaddr" ] || \
-				local dhcpopts
+				$DEBUG ifconfig "$iface" "$ipaddr" ${netmask:+netmask "$netmask"}
-				[ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
-				[ "$broadcast" = 1 ] && broadcast="-O broadcast" || broadcast=
 
-				$DEBUG eval udhcpc -t 0 -i "$iface" \
+			# don't stay running in background if dhcp is not the main proto on the interface (e.g. when using pptp)
-					${ipaddr:+-r $ipaddr} \
+			local dhcpopts
-					${hostname:+-H $hostname} \
+			[ ."$proto1" != ."$proto" ] && dhcpopts="-n -q"
-					${clientid:+-c $clientid} \
+			[ "$broadcast" = 1 ] && broadcast="-O broadcast" || broadcast=
-					-b -p "$pidfile" $broadcast \
-					${dhcpopts:- -O rootpath -R &}
 
-				lock -u "$lockfile"
+			$DEBUG eval udhcpc -t 0 -i "$iface" \
-			fi
+				${ipaddr:+-r $ipaddr} \
+				${hostname:+-H $hostname} \
+				${clientid:+-c $clientid} \
+				${vendorid:+-V $vendorid} \
+				-b -p "$pidfile" $broadcast \
+				${dhcpopts:- -O rootpath -R &}
 		;;
 		none)
 			setup_interface_none "$iface" "$config"
@@ -400,12 +394,7 @@ stop_interface_dhcp() {
 	remove_dns "$config"
 
 	local pidfile="/var/run/dhcp-${ifname}.pid"
-	local pid="$(cat "$pidfile" 2>/dev/null)"
+	service_kill udhcpc "$pidfile"
-	[ -d "/proc/$pid" ] && {
-		grep -qs udhcpc "/proc/$pid/cmdline" && kill -TERM $pid && \
-			while grep -qs udhcpc "/proc/$pid/cmdline"; do sleep 1; done
-		rm -f "$pidfile"
-	}
 
 	uci -P /var/state revert "network.$config"
 }

package/base-files/files/lib/preinit/20_device_fs_mount

@@ -7,7 +7,7 @@ do_mount_devfs() {
 }
 
 do_mount_hotplug() {
-    mount -t tmpfs tmpfs /dev -o size=512K
+    mount -t tmpfs tmpfs /dev -o mode=0755,size=512K
 }
 
 do_mount_udev() {

package/base-files/files/lib/preinit/41_merge_overlay_hooks

@@ -0,0 +1,24 @@
+#!/bin/sh
+# Copyright (C) 2010 OpenWrt.org
+
+merge_overlay_hooks() {
+	jffs2_not_mounted || [ ! -d /tmp/overlay/lib/preinit ] || {
+		echo "- merge overlay components -"
+
+		mkdir -p /tmp/preinit-hook-merge
+		ln -sf /lib/preinit/* /tmp/overlay/lib/preinit/[0-9][0-9]_* /tmp/preinit-hook-merge/
+
+		boot_hook_splice_start
+
+		local pipart
+		for pipart in /tmp/preinit-hook-merge/*; do
+			. $pipart
+		done
+
+		boot_hook_splice_finish
+
+		rm -rf /tmp/preinit-hook-merge
+	}
+}
+
+boot_hook_add preinit_mount_root merge_overlay_hooks

package/base-files/files/lib/upgrade/keep.d/base-files-essential

@@ -0,0 +1,10 @@
+# Essential files that will be always kept
+/etc/banner
+/etc/hosts
+/etc/inittab
+/etc/group
+/etc/passwd
+/etc/profile
+/etc/shells
+/etc/sysctl.conf
+/etc/rc.local

package/base-files/files/sbin/sysupgrade

@@ -51,8 +51,10 @@ EOF
 
 add_uci_conffiles() {
 	local file="$1"
-	find /etc/config /etc/passwd /etc/group /etc/dropbear \
+	( find $(sed -ne '/^[[:space:]]*$/d; /^#/d; p' \
-		/etc/firewall.user /etc/rc.local -type f > "$file"
+		/etc/sysupgrade.conf /lib/upgrade/keep.d/* 2>/dev/null) \
+		-type f 2>/dev/null;
+	  opkg list-changed-conffiles ) | sort -u > "$file"
 	return 0
 }
 

package/base-files/files/usr/share/udhcpc/default.script

@@ -21,9 +21,9 @@ setup_interface () {
 	local user_router
 
 	[ -n "$ifc" ] && {
-		config_get old_ip        "$ifc" ipaddr
+		old_ip="$(uci_get_state network "$ifc" ipaddr)"
-		config_get old_broadcast "$ifc" broadcast
+		old_broadcast="$(uci_get_state network "$ifc" broadcast)"
-		config_get old_subnet    "$ifc" netmask
+		old_subnet="$(uci_get_state network "$ifc" netmask)"
 	}
 
 	[ "$ip" != "$old_ip" ] \
@@ -41,8 +41,8 @@ setup_interface () {
 	# Default Route
 	[ -n "$ifc" ] && {
 		change_state network "$ifc" lease_gateway "$router"
-		config_get old_router "$ifc" gateway
+		old_router="$(uci_get_state network "$ifc" gateway)"
-		user_router=$(uci_get "network.$ifc.gateway")
+		user_router="$(uci_get network "$ifc" gateway)"
 		[ -n "$user_router" ] && router="$user_router"
 	}
 

package/block-extroot/Makefile

@@ -17,10 +17,9 @@ PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME)
 include $(INCLUDE_DIR)/package.mk
 
 define Package/block-extroot/Default
-  SECTION:=utils
+  SECTION:=base
-  CATEGORY:=Utilities
+  CATEGORY:=Base system
   TITLE:=root filesystem on secondary storage
-  SUBMENU:=disc
 endef
 
 define Package/block-extroot

package/block-extroot/files/50_determine_usb_root

@@ -4,11 +4,10 @@
 # See /LICENSE for more information.
 
 
-. /etc/functions.sh
-. /lib/functions/extmount.sh
-. /lib/functions/mount.sh
-
 determine_external_root() {
+	pi_include /lib/functions/extmount.sh
+	pi_include /lib/functions/mount.sh
+
 	local OLD_UCI_CONFIG_DIR="$UCI_CONFIG_DIR"
 	set_jffs_mp
 	determine_root_device

package/block-extroot/files/extmount.sh

@@ -13,12 +13,14 @@ set_jffs_mp() {
 }
 
 er_load_modules() {
-	[ -d $ER_ROOT/etc/modules.d ] && {
+	mkdir -p /tmp/extroot_modules/modules.d
-	    cd $ER_ROOT/etc/modules.d && {
+	mkdir -p /tmp/extroot_modules/modules
-	    	local modules="$(grep -l '# May be required for rootfs' *)"
+	ln -sf /etc/modules.d/* /tmp/overlay/etc/modules.d/* /tmp/extroot_modules/modules.d
-	    	cat $modules | sed 's/^\([^#]\)/insmod \1/' | sh 2>&- || : 
+	ln -sf /lib/modules/*/* /tmp/overlay/lib/modules/*/* /tmp/extroot_modules/modules
-	    }
+    	local modules="$(grep -l '# May be required for rootfs' /tmp/extroot_modules/modules.d/*)"
+	cd /tmp/extroot_modules/modules && {
+		cat $modules | sed -e 's/^\([^#].*\)/insmod \.\/\1.ko/'| sh 2>&- || :
 	}
+	rm -rf /tmp/extroot_modules
 }
 
-

package/block-mount/files/block.sh

@@ -118,15 +118,18 @@ config_create_swap_fstab_entry() {
 
 	[ -n "$device" ] || return 0
 
-	local fstabnew="$(mktemp -t '.fstab.XXXXXXXX')"
+	local fstabnew
 	
 	mkdir -p /var/lock
-	lock /var/lock/fstab.lck
+	lock -w /var/lock/fstab.lck && {
-	cat /tmp/fstab | grep -E -v "^$device[[:blank:]]" >>"$fstabnew"
+		lock /var/lock/fstab.lck
-	[ "$enabled" -eq 1 ] && echo "$device	none	swap	sw	0	0" >> "$fstabnew"
+		fstabnew="$(mktemp -t '.fstab.XXXXXXXX')"
-	cat "$fstabnew" >/tmp/fstab
+		cat /tmp/fstab | grep -E -v "^$device[[:blank:]]" >>"$fstabnew"
-	lock -u /var/lock/fstab.lck
+		[ "$enabled" -eq 1 ] && echo "$device	none	swap	sw	0	0" >> "$fstabnew"
-	rm -f $fstabnew
+		cat "$fstabnew" >/tmp/fstab
+		rm -f $fstabnew
+		lock -u /var/lock/fstab.lck
+	}
 }
 
 config_create_mount_fstab_entry() {
@@ -140,15 +143,18 @@ config_create_mount_fstab_entry() {
 	[ -n "$target" ] || return 0
 	[ -n "$device" ] || return 0
 
-	local fstabnew="$(mktemp -t '.fstab.XXXXXXXX')"
+	local fstabnew
 	
 	mkdir -p /var/lock
-	lock /var/lock/fstab.lck
+	lock -w /var/lock/fstab.lck && {
-	cat /tmp/fstab | grep -E -v "^$device[[:blank:]]" | grep -v "$target" >>"$fstabnew"
+		lock /var/lock/fstab.lck
-	echo "$device	$target	$fstype	$options	0	0" >>"$fstabnew"
+		fstabnew="$(mktemp -t '.fstab.XXXXXXXX')"
-	cat "$fstabnew" >/tmp/fstab		
+		cat /tmp/fstab | grep -E -v "^$device[[:blank:]]" | grep -v "$target" >>"$fstabnew"
-	lock -u /var/lock/fstab.lck
+		echo "$device	$target	$fstype	$options	0	0" >>"$fstabnew"
-	rm -f $fstabnew
+		cat "$fstabnew" >/tmp/fstab		
+		rm -f $fstabnew
+		lock -u /var/lock/fstab.lck
+	}
 }
 
 libmount_find_token() {

package/block-mount/files/fsck.sh

@@ -12,25 +12,23 @@ libmount_fsck() {
 	local found_fsck=0
 	
 
-	[ -n "$fsck_type" ] && [ "$fsck_type" != "swap" ] && {
+	grep -q "$device" /proc/swaps || grep -q "$device" /proc/mounts || {
-		grep -q "$device" /proc/swaps || grep -q "$device" /proc/mounts || {
+		[ -e "$device" ] && [ "$fsck_enabled" -eq 1 ] && {
-			[ -e "$device" ] && [ "$fsck_enabled" -eq 1 ] && {
+			for known_type in $libmount_known_fsck; do
-				for known_type in $libmount_known_fsck; do
+				if [ "$known_type" = "$fsck_fstype" ]; then
-					if [ "$known_type" = "$fsck_fstype" ]; then
+					fsck_${known_type} "$device"
-						fsck_${known_type} "$device"
+					found_fsck=1
-						found_fsck=1
+					break
-						break
-					fi
-				done
-				if [ "$found_fsck" -ne 1 ]; then
-					logger -t 'fstab' "Unable to check/repair $device; no known fsck for filesystem type $fstype"
 				fi
-			}
+			done
+			if [ "$found_fsck" -ne 1 ]; then
+				logger -t 'fstab' "Unable to check/repair $device; no known fsck for filesystem type $fstype"
+			fi
 		}
 	}
 }
 
 libmount_known_fsck=""
 
-include /lib/functions/fsck
+pi_include /lib/functions/fsck
 

package/block-mount/files/fstab.init

@@ -8,8 +8,6 @@
 
 START=20
 
-. /lib/functions/mount.sh
-
 do_mount() {
 	local cfg="$1"
 	config_mount_by_section "$cfg"
@@ -39,19 +37,29 @@ do_swapoff() {
 }
 
 start() {
+	. /lib/functions/mount.sh
+
 	config_load fstab
 	mkdir -p /var/lock
-	lock /var/lock/fstab.lck
+	lock -w /var/lock/fstab.lck && {
-	echo '# WARNING: this is an auto generated file, please use uci to set defined filesystems' > /etc/fstab
+		lock /var/lock/fstab.lck
-	lock -u /var/lock/fstab.lck
+		[ -e /tmp/fstab ] || { 
-	config_foreach do_mount mount
+			echo '# WARNING: this is an auto generated file, please use uci to set defined filesystems' > /tmp/fstab
+		}
+		lock -u /var/lock/fstab.lck
+	}
 	config_foreach do_swapon swap
+	config_foreach do_mount mount
+	config_foreach do_swapon swap  # do swap a second time so that swap on filesystems is enabled
 }
 
 stop() {
+	. /lib/functions/mount.sh
+
 	config_load fstab
 	config_foreach do_unmount mount
 	config_foreach do_swapoff swap
 	swapoff -a
 }
 
+

package/block-mount/files/mount.sh

@@ -5,8 +5,8 @@
 #
 
 
-. /lib/functions/block.sh
+pi_include /lib/functions/block.sh
-. /lib/functions/fsck.sh
+pi_include /lib/functions/fsck.sh
 
 config_mount_by_section() {
 	local cfg="$1"
@@ -28,14 +28,13 @@ config_mount_by_section() {
 		local is_rootfs="$9"
 		shift
 		local found_device=""
-		local fsck_type=""
 		
 		found_device="$(libmount_find_device_by_id "$uuid" "$label" "$device" "$cfgdevice")"
 		if [ -n "$found_device" ]; then
 			if [ -z "$find_rootfs" ] || [ "$find_rootfs" -eq 0 ] || [ "$is_rootfs" -eq 1 ]; then
 				[ "$enabled_fsck" -eq 1 ] && {
 					grep -q "$found_device" /proc/swaps || grep -q "$found_device" /proc/mounts || {
-						libmount_fsck "$found_device" "$fsck_type" "$enabled_fsck"
+						libmount_fsck "$found_device" "$fstype" "$enabled_fsck"
 					}
 				}								
 	
@@ -72,7 +71,6 @@ config_swapon_by_section() {
 		local label
 		
 		local found_device=""
-		local fsck_type=""
 		
 		found_device="$(libmount_find_device_by_id "$uuid" "$label" "$device" "$cfgdevice")"
 

package/broadcom-wl/files/lib/wifi/broadcom.sh

@@ -354,7 +354,7 @@ detect_broadcom() {
 		cat <<EOF
 config wifi-device  wl${i}
 	option type     broadcom
-	option channel  5
+	option channel  11
 
 	# REMOVE THIS LINE TO ENABLE WIFI:
 	option disabled 1

package/busybox/Makefile

@@ -10,6 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=busybox
 PKG_VERSION:=1.15.3
 PKG_RELEASE:=2
+PKG_FLAGS:=essential
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=http://www.busybox.net/downloads \

package/busybox/files/telnet

@@ -1,16 +1,24 @@
 #!/bin/sh /etc/rc.common
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2010 OpenWrt.org
 START=50
 
+has_root_pwd() {
+	local pwd=$([ -f "$1" ] && cat "$1")
+	      pwd="${pwd#*root:}"
+	      pwd="${pwd%%:*}"
+
+	test -n "${pwd#!}"
+}
+
 start() {
-	if 	[ \! -f /etc/passwd ] || \
+	if ( ! has_root_pwd /etc/passwd && ! has_root_pwd /etc/shadow ) || \
-		awk -F: '/^root:/ && ($2 != "") && ($2 !~ /\!/) {exit 1}' /etc/passwd 2>/dev/null || \
+	   ( [ ! -x /usr/sbin/dropbear ] && [ ! -x /usr/sbin/sshd ] );
-		( [ \! -x /usr/sbin/dropbear ] && [ \! -x /usr/sbin/sshd ] )
+	then
-	then \
 		telnetd -l /bin/login.sh
 	fi
 }
 
 stop() {
-	killall telnetd
+	killall telnetd 2>/dev/null
 }
+

package/carl9170/Makefile

@@ -1,90 +0,0 @@
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=carl9170
-PKG_VERSION:=1.0.5.3
-PKG_RELEASE:=1
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=@KERNEL/linux/kernel/people/chr/carl9170/$(PKG_VERSION) \
-	@KERNEL/linux/kernel/people/chr/carl9170/old/$(PKG_VERSION)
-PKG_MD5SUM:=91d714d1e5c5c62da1191ac5afd8bcb0
-
-PKG_CONFIG_DEPENDS:= \
-	CONFIG_PACKAGE_CARL9170_DEBUGFS \
-
-include $(INCLUDE_DIR)/package.mk
-
-DRV_PATH:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170
-
-define KernelPackage/carl9170
-  SUBMENU:=Wireless Drivers
-  TITLE:=Driver for Atheros AR9170 USB sticks
-  DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core
-  URL:=http://www.kernel.org/pub/linux/kernel/people/chr/carl9170
-  FILES:=$(DRV_PATH)/carl9170usb.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,60,carl9170usb)
-  MENU:=1
-endef
-
-define KernelPackage/carl9170/config
-	menu "Configuration"
-		depends PACKAGE_kmod-carl9170
-
-	config PACKAGE_CARL9170_DEBUGFS
-		bool "Enable Debugging (DebugFS) Support"
-		depends PACKAGE_MAC80211_DEBUGFS
-		help
-		  Say Y if you need access to carl9170usb's statistics for QoS queue 
-		  status, rate control, etc...
-
-	endmenu
-endef
-
-define KernelPackage/carl9170/description
- This package contains a driver for Atheros AR9170 USB sticks using the free firmware
-endef
-
-define Build/Prepare
-	rm -rf $(PKG_BUILD_DIR)
-	mkdir -p $(PKG_BUILD_DIR)
-	$(HOST_TAR) -C $(PKG_BUILD_DIR) -xjf $(DL_DIR)/$(PKG_SOURCE)
-	$(HOST_TAR) -C $(PKG_BUILD_DIR) -xf $(PKG_BUILD_DIR)/$(PKG_VERSION)/driver/carl9170-driver-$(PKG_VERSION).tar
-	ln -s $(STAGING_DIR)/usr/include/mac80211/ath/*.h $(PKG_BUILD_DIR)/drivers/net/wireless/ath/
-	$(Build/Patch)
-endef
-
-BUILDFLAGS = \
-	CONFIG_CARL9170_USB=m \
-	CONFIG_CARL9170_LEDS=$(if $(CONFIG_LEDS_TRIGGERS),y) \
-	CONFIG_CARL9170_DEBUGFS=$(if $(CONFIG_PACKAGE_CARL9170_DEBUGFS),y) \
-	CONFIG_MAC80211_DEBUGFS=$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),y) \
-
-EXTRA_CFLAGS = \
-	$(if $(CONFIG_ATH_USER_REGD),-DATH_USER_REGD) \
-	$(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS -DCONFIG_CARL9170_LEDS) \
-	$(if $(CONFIG_PACKAGE_CARL9170_DEBUGFS),-DCONFIG_CARL9170_DEBUGFS) \
-	$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),-DCONFIG_MAC80211_DEBUGFS) \
-
-define Build/Compile
-	$(MAKE) -C $(LINUX_DIR) \
-		SUBDIRS="$(DRV_PATH)" \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(KERNEL_CROSS)" \
-		CC="$(TARGET_CC) -I$(STAGING_DIR)/usr/include/mac80211 $(EXTRA_CFLAGS)" \
-		$(BUILDFLAGS)
-endef
-
-define KernelPackage/carl9170/install
-	$(INSTALL_DIR) $(1)/lib/firmware
-	$(INSTALL_DATA) $(PKG_BUILD_DIR)/$(PKG_VERSION)/firmware_build/carl9170-1.fw $(1)/lib/firmware/
-endef
-
-$(eval $(call KernelPackage,carl9170))

package/carl9170/patches/100-request_firmware_compat.patch

@@ -1,31 +0,0 @@
---- a/drivers/net/wireless/ath/carl9170/usb.c
-+++ b/drivers/net/wireless/ath/carl9170/usb.c
-@@ -1000,11 +1000,28 @@ err_failed:
- 	ar9170_usb_firmware_failed(aru);
- }
- 
-+
-+
- static int ar9170_usb_request_firmware(struct ar9170_usb *aru)
- {
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,33))
-+	const struct firmware *fw;
-+	int ret;
-+
-+	ret = request_firmware(&fw,
-+		ar9170_fws[aru->fw_load].files[aru->fw_files].name,
-+		&aru->udev->dev);
-+
-+	if (ret < 0)
-+		return ret;
-+
-+	ar9170_usb_firmware_step2(fw, aru);
-+	return 0;
-+#else
- 	return request_firmware_nowait(THIS_MODULE, 1,
- 		ar9170_fws[aru->fw_load].files[aru->fw_files].name,
- 		&aru->udev->dev, GFP_KERNEL, aru, ar9170_usb_firmware_step2);
-+#endif
- }
- 
- static void ar9170_usb_disconnect(struct usb_interface *intf)

package/carl9170/patches/110-ht_default.patch

@@ -1,11 +0,0 @@
---- a/drivers/net/wireless/ath/carl9170/main.c
-+++ b/drivers/net/wireless/ath/carl9170/main.c
-@@ -51,7 +51,7 @@ static int modparam_nohwcrypt;
- module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
- MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
- 
--int modparam_ht;
-+int modparam_ht = 1;
- module_param_named(ht, modparam_ht, bool, S_IRUGO);
- MODULE_PARM_DESC(ht, "enable MPDU aggregation.");
- 

package/crda/Makefile

@@ -28,7 +28,7 @@ define Package/crda
   SECTION:=net
   CATEGORY:=Network
   TITLE:=Central Regulatory Domain Agent (CRDA)
-  DEPENDS:=@LINUX_2_6 +hotplug2 +kmod-mac80211 +libnl-tiny
+  DEPENDS:=@LINUX_2_6 +hotplug2 +libnl-tiny
   URL:=http://wireless.kernel.org/en/developers/Regulatory/CRDA
 endef
 

package/dnsmasq/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=dnsmasq
 PKG_VERSION:=2.55
-PKG_RELEASE:=3
+PKG_RELEASE:=5
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=http://thekelleys.org.uk/dnsmasq

package/dnsmasq/files/dhcp.conf

@@ -4,7 +4,7 @@ config dnsmasq
 	option filterwin2k	0  # enable for dial on demand
 	option localise_queries	1
 	option rebind_protection 1  # disable if upstream must serve RFC1918 addresses
-	option rebind_localhost 0  # enable for RBL checking and similar services
+	option rebind_localhost 1  # enable for RBL checking and similar services
 	#list rebind_domain example.lan  # whitelist RFC1918 responses for domains
 	option local	'/lan/'
 	option domain	'lan'
@@ -18,6 +18,7 @@ config dnsmasq
 	#option nonwildcard	1
 	#list interface		br-lan
 	#list notinterface	lo
+	#list bogusnxdomain     '64.94.110.11'
 
 config dhcp lan
 	option interface	lan

package/dnsmasq/files/dnsmasq.init

@@ -42,17 +42,23 @@ append_server() {
 }
 
 append_interface() {
-	append args "-i $1"
+	local ifname=$(uci_get_state network "$1" ifname "$1")
+	append args "-i $ifname"
 }
 
 append_notinterface() {
-	append args "-I $1"
+	local ifname=$(uci_get_state network "$1" ifname "$1")
+	append args "-I $ifname"
 }
 
 append_addnhosts() {
 	append args "-H $1"
 }
 
+append_bogusnxdomain() {
+       append args "-B $1"
+}
+
 dnsmasq() {
 	local cfg="$1"
 	append_bool "$cfg" authoritative "-K"
@@ -72,6 +78,7 @@ dnsmasq() {
 	append_bool "$cfg" enable_tftp "--enable-tftp"
 	append_bool "$cfg" nonwildcard "-z"
 
+	append_parm "$cfg" cachesize "-c"
 	append_parm "$cfg" dnsforwardmax "-0"
 	append_parm "$cfg" port "-p"
 	append_parm "$cfg" ednspacket_max "-P"
@@ -83,6 +90,7 @@ dnsmasq() {
 	config_list_foreach "$cfg" "interface" append_interface
 	config_list_foreach "$cfg" "notinterface" append_notinterface
 	config_list_foreach "$cfg" "addnhosts" append_addnhosts
+	config_list_foreach "$cfg" "bogusnxdomain" append_bogusnxdomain
 	append_parm "$cfg" "leasefile" "-l"
 	append_parm "$cfg" "resolvfile" "-r"
 	append_parm "$cfg" "tftp_root" "--tftp-root"
@@ -94,7 +102,7 @@ dnsmasq() {
 	[ "$readethers" = "1" ] && [ -e "/etc/ethers" ] || touch /etc/ethers
 
 	config_get leasefile $cfg leasefile
-	[ -e "$leasefile" ] || touch "$leasefile"
+	[ -n "$leasefile" ] && [ -e "$leasefile" ] || touch "$leasefile"
 	config_get_bool cachelocal "$cfg" cachelocal 1
 
 	config_get hostsfile "$cfg" dhcphostsfile

package/firewall/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=firewall
 
 PKG_VERSION:=1
-PKG_RELEASE:=16
+PKG_RELEASE:=20
 
 include $(INCLUDE_DIR)/package.mk
 
@@ -32,6 +32,7 @@ endef
 
 define Package/firewall/conffiles
 /etc/config/firewall
+/etc/firewall.user
 endef
 
 define Package/firewall/install

package/firewall/files/reflection.hotplug

@@ -15,6 +15,11 @@ if [ "$ACTION" = "add" ] && [ "$INTERFACE" = "wan" ]; then
 		iptables -t nat -A postrouting_rule -j nat_reflection_out
 	}
 
+	iptables -t filter -F nat_reflection_fwd 2>/dev/null || {
+		iptables -t filter -N nat_reflection_fwd
+		iptables -t filter -A forwarding_rule -j nat_reflection_fwd
+	}
+
 	find_networks() {
 		find_networks_cb() {
 			local cfg="$1"
@@ -34,10 +39,14 @@ if [ "$ACTION" = "add" ] && [ "$INTERFACE" = "wan" ]; then
 
 		config_foreach find_networks_cb zone "$1"
 	}
-	
+
 	setup_fwd() {
 		local cfg="$1"
 
+		local reflection
+		config_get_bool reflection "$cfg" reflection 1
+		[ "$reflection" == 1 ] || return
+
 		local src
 		config_get src "$cfg" src
 
@@ -56,10 +65,6 @@ if [ "$ACTION" = "add" ] && [ "$INTERFACE" = "wan" ]; then
 				local proto
 				config_get proto "$cfg" proto
 
-				local reflection
-				config_get_bool reflection "$cfg" reflection 1
-				[ "$reflection" == 1 ] || return
-
 				local epmin epmax extport
 				config_get extport "$cfg" src_dport
 				[ -n "$extport" ] || return
@@ -82,6 +87,9 @@ if [ "$ACTION" = "add" ] && [ "$INTERFACE" = "wan" ]; then
 
 				[ "$proto" = tcpudp ] && proto="tcp udp"
 
+				[ "${inthost#!}" = "$inthost" ] || return 0
+				[ "${exthost#!}" = "$exthost" ] || return 0
+
 				local p
 				for p in ${proto:-tcp udp}; do
 					case "$p" in
@@ -95,6 +103,11 @@ if [ "$ACTION" = "add" ] && [ "$INTERFACE" = "wan" ]; then
 								-s $lanip/$lanmk -d $inthost \
 								-p $p --dport $ipmin${ipmax:+:$ipmax} \
 								-j SNAT --to-source $lanip
+
+							iptables -t filter -A nat_reflection_fwd \
+								-s $lanip/$lanmk -d $inthost \
+								-p $p --dport $ipmin${ipmax:+:$ipmax} \
+								-j ACCEPT
 						;;
 					esac
 				done
@@ -105,4 +118,3 @@ if [ "$ACTION" = "add" ] && [ "$INTERFACE" = "wan" ]; then
 	config_load firewall
 	config_foreach setup_fwd redirect
 fi
-

package/firewall/files/uci_firewall.sh

@@ -15,6 +15,7 @@ config_load firewall
 
 config fw_zones
 ZONE_LIST=$CONFIG_SECTION
+ZONE_NAMES=
 
 CUSTOM_CHAINS=1
 DEF_INPUT=DROP
@@ -23,6 +24,25 @@ DEF_FORWARD=DROP
 CONNTRACK_ZONES=
 NOTRACK_DISABLED=
 
+add_state() {
+	local var="$1"
+	local item="$2"
+
+	local val="$(uci_get_state firewall core $var)"
+	uci_set_state firewall core $var "${val:+$val }$item"
+}
+
+del_state() {
+	local var="$1"
+	local item="$2"
+
+	local val=" $(uci_get_state firewall core $var) "
+	val="${val// $item / }"
+	val="${val# }"
+	val="${val% }"
+	uci_set_state firewall core $var "$val"
+}
+
 find_item() {
 	local item="$1"; shift
 	for i in "$@"; do
@@ -44,6 +64,16 @@ get_portrange() {
 		export -n -- "$_var=${_min:-$_max}"
 }
 
+get_negation() {
+	local _var="$1"
+	local _flag="$2"
+	local _ipaddr="$3"
+
+	[ "${_ipaddr#!}" != "$_ipaddr" ] && \
+		export -n -- "$_var=! $_flag ${_ipaddr#!}" || \
+		export -n -- "$_var=${_ipaddr:+$_flag $_ipaddr}"
+}
+
 load_policy() {
 	config_get input $1 input
 	config_get output $1 output
@@ -88,13 +118,15 @@ create_zone() {
 	if [ "$masq" == "1" ]; then
 		local msrc mdst
 		for msrc in ${masq_src:-0.0.0.0/0}; do
-			[ "${msrc#!}" != "$msrc" ] && msrc="! -s ${msrc#!}" || msrc="-s $msrc"
+			get_negation msrc '-s' "$msrc"
 			for mdst in ${masq_dest:-0.0.0.0/0}; do
-				[ "${mdst#!}" != "$mdst" ] && mdst="! -d ${mdst#!}" || mdst="-d $mdst"
+				get_negation mdst '-d' "$mdst"
 				$IPTABLES -A zone_${name}_nat -t nat $msrc $mdst -j MASQUERADE
 			done
 		done
 	fi
+
+	append ZONE_NAMES "$name"
 }
 
 
@@ -132,6 +164,8 @@ addif() {
 	uci_set_state firewall core "${network}_ifname" "$ifname"
 	uci_set_state firewall core "${network}_zone" "$zone"
 
+	add_state "${zone}_networks" "$network"
+
 	ACTION=add ZONE="$zone" INTERFACE="$network" DEVICE="$ifname" /sbin/hotplug-call firewall
 }
 
@@ -158,6 +192,8 @@ delif() {
 	uci_revert_state firewall core "${network}_ifname"
 	uci_revert_state firewall core "${network}_zone"
 
+	del_state "${zone}_networks" "$network"
+
 	ACTION=remove ZONE="$zone" INTERFACE="$network" DEVICE="$ifname" /sbin/hotplug-call firewall
 }
 
@@ -327,27 +363,41 @@ fw_rule() {
 	config_get target $1 target
 	config_get ruleset $1 ruleset
 
+	[ "$target" != "NOTRACK" ] || [ -n "$src" ] || {
+		echo "NOTRACK rule needs src"
+		return
+	}
+
+	local srcaddr destaddr
+	get_negation srcaddr '-s' "$src_ip"
+	get_negation destaddr '-d' "$dest_ip"
+
 	local srcports destports
 	get_portrange srcports "$src_port" ":"
 	get_portrange destports "$dest_port" ":"
 
 	ZONE=input
-	TARGET=$target
+	TABLE=filter
-	[ -z "$target" ] && target=DROP
+	TARGET="${target:-DROP}"
-	[ -n "$src" -a -z "$dest" ] && ZONE=zone_$src
-	[ -n "$src" -a -n "$dest" ] && ZONE=zone_${src}_forward
-	[ -n "$dest" ] && TARGET=zone_${dest}_$target
 
-	eval 'RULE_COUNT=$((++RULE_COUNT_'$ZONE'))'
+	if [ "$TARGET" = "NOTRACK" ]; then
+		TABLE=raw
+		ZONE="zone_${src}_notrack"
+	else
+		[ -n "$src" ] && ZONE="zone_${src}${dest:+_forward}"
+		[ -n "$dest" ] && TARGET="zone_${dest}_${TARGET}"
+	fi
+
+	local pos
+	eval 'pos=$((++FW__RULE_COUNT_'$ZONE'))'
 
 	add_rule() {
-		$IPTABLES -I $ZONE $RULE_COUNT \
+		$IPTABLES -t $TABLE -I $ZONE $pos \
+			$srcaddr $destaddr \
 			${proto:+-p $proto} \
 			${icmp_type:+--icmp-type $icmp_type} \
-			${src_ip:+-s $src_ip} \
 			${srcports:+--sport $srcports} \
 			${src_mac:+-m mac --mac-source $src_mac} \
-			${dest_ip:+-d $dest_ip} \
 			${destports:+--dport $destports} \
 			-j $TARGET
 	}
@@ -413,7 +463,7 @@ fw_redirect() {
 		nataddr="$dest_ip"
 		get_portrange natports "$dest_port" "-"
 
-		srcdaddr="$src_dip"
+		get_negation srcdaddr '-d' "$src_dip"
 		get_portrange srcdports "$src_dport" ":"
 
 		find_item "$src" $CONNTRACK_ZONES || \
@@ -432,7 +482,7 @@ fw_redirect() {
 		nataddr="$src_dip"
 		get_portrange natports "$src_dport" "-"
 
-		srcdaddr="$dest_ip"
+		get_negation srcdaddr '-d' "$dest_ip"
 		get_portrange srcdports "$dest_port" ":"
 
 		find_item "$dest" $CONNTRACK_ZONES || \
@@ -443,26 +493,31 @@ fw_redirect() {
 		return
 	fi
 
+	local srcaddr destaddr
+	get_negation srcaddr '-s' "$src_ip"
+	get_negation destaddr '-d' "$dest_ip"
+
 	local srcports destports
 	get_portrange srcports "$src_port" ":"
 	get_portrange destports "${dest_port-$src_dport}" ":"
 
 	add_rule() {
-		$IPTABLES -I $natchain 1 -t nat \
+		local pos
+		eval 'pos=$((++FW__REDIR_COUNT_'$natchain'))'
+
+		$IPTABLES -I $natchain $pos -t nat \
+			$srcaddr $srcdaddr \
 			${proto:+-p $proto} \
-			${src_ip:+-s $src_ip} \
 			${srcports:+--sport $srcports} \
-			${srcdaddr:+-d $srcdaddr} \
 			${srcdports:+--dport $srcdports} \
 			${src_mac:+-m mac --mac-source $src_mac} \
 			-j ${target:-DNAT} $natopt $nataddr${natports:+:$natports}
 
 		[ -n "$dest_ip" ] && \
 		$IPTABLES -I ${fwdchain:-forward} 1 \
+			$srcaddr $destaddr \
 			${proto:+-p $proto} \
-			${src_ip:+-s $src_ip} \
 			${srcports:+--sport $srcports} \
-			${dest_ip:+-d $dest_ip} \
 			${destports:+--dport $destports} \
 			${src_mac:+-m mac --mac-source $src_mac} \
 			-j ACCEPT
@@ -605,9 +660,22 @@ fw_init() {
 	for interface in $INTERFACES; do
 		fw_event ifup "$interface"
 	done
+
+	uci_set_state firewall core zones "$ZONE_NAMES"
 }
 
 fw_stop() {
+	local z n i
+	config_get z core zones
+	for z in $z; do
+		config_get n core "${z}_networks"
+		for n in $n; do
+			config_get i core "${n}_ifname"
+			[ -n "$i" ] && env -i ACTION=remove ZONE="$z" INTERFACE="$n" DEVICE="$i" \
+				/sbin/hotplug-call firewall
+		done
+	done
+
 	fw_clear
 	$IPTABLES -P INPUT ACCEPT
 	$IPTABLES -P OUTPUT ACCEPT

package/hostapd/Config.in

@@ -20,3 +20,8 @@ config WPA_SUPPLICANT_OPENSSL
 	select PACKAGE_libopenssl
 
 endchoice
+
+config WPA_RFKILL_SUPPORT
+	bool "Add rfkill support"
+	depends PACKAGE_wpa-supplicant || PACKAGE_wpa-supplicant-mini || PACKAGE_wpad || PACKAGE_wpad-mini
+	default n

package/hostapd/Makefile

@@ -8,9 +8,9 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=hostapd
-PKG_VERSION:=20100418
+PKG_VERSION:=20100705
-PKG_RELEASE:=2
+PKG_RELEASE:=1
-PKG_REV:=0b86f67a2970403d1b1b6d34ce49f5485ef5dbb3
+PKG_REV:=2f1ce78bf78cecd7021385b04a4f55f22e76ab97
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=git://w1.fi/srv/git/hostap.git
@@ -30,7 +30,8 @@ PKG_CONFIG_DEPENDS:= \
 	CONFIG_PACKAGE_kmod-madwifi \
 	CONFIG_PACKAGE_hostapd \
 	CONFIG_PACKAGE_hostapd-mini \
-	CONFIG_PACKAGE_kmod-hostap
+	CONFIG_PACKAGE_kmod-hostap \
+	CONFIG_WPA_RFKILL_SUPPORT
 
 LOCAL_TYPE=$(strip \
 		$(if $(findstring wpad,$(BUILD_VARIANT)),wpad, \
@@ -64,7 +65,8 @@ DRIVER_MAKEOPTS= \
 	CONFIG_DRIVER_MADWIFI=$(CONFIG_PACKAGE_kmod-madwifi) \
 	CONFIG_DRIVER_HOSTAP=$(CONFIG_PACKAGE_kmod-hostap) \
 	CONFIG_IEEE80211N=$(HOSTAPD_IEEE80211N) \
-	CONFIG_IEEE80211W=$(CONFIG_PACKAGE_kmod-ath9k)
+	CONFIG_IEEE80211W=$(CONFIG_PACKAGE_kmod-ath9k) \
+	$(if $(CONFIG_WPA_RFKILL_SUPPORT),NEED_RFKILL=y)
 
 ifneq ($(LOCAL_TYPE),hostapd)
   ifdef CONFIG_WPA_SUPPLICANT_OPENSSL
@@ -80,7 +82,7 @@ ifneq ($(LOCAL_TYPE),hostapd)
 	CONFIG_DRIVER_ROBOSWITCH=$(CONFIG_PACKAGE_kmod-switch)
 endif
 
-DRV_DEPENDS:=+PACKAGE_kmod-mac80211:libnl-tiny +PACKAGE_kmod-mac80211:crda @(!(TARGET_avr32||TARGET_etrax)||BROKEN)
+DRV_DEPENDS:=+PACKAGE_kmod-mac80211:libnl-tiny @(!(TARGET_avr32||TARGET_etrax)||BROKEN)
 
 define Package/hostapd/Default
   SECTION:=net
@@ -115,7 +117,7 @@ endef
 define Package/hostapd-utils
   $(call Package/hostapd/Default)
   TITLE+= (utils)
-  DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini
+  DEPENDS:=@PACKAGE_hostapd||PACKAGE_hostapd-mini||PACKAGE_wpad||PACKAGE_wpad-mini
 endef
 
 define Package/hostapd-utils/description
@@ -186,7 +188,7 @@ endef
 define Package/wpa-cli
   SECTION:=net
   CATEGORY:=Network
-  DEPENDS:=wpa-supplicant
+  DEPENDS:=@PACKAGE_wpa-supplicant||PACKAGE_wpad-mini||PACKAGE_wpad
   TITLE:=WPA Supplicant command line interface
   MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
 endef
@@ -237,7 +239,7 @@ endef
 define Build/Compile/wpad
 	echo ` \
 		$(call Build/RunMake,hostapd,-s MULTICALL=1 dump_cflags); \
-		$(call Build/RunMake,wpa_supplicant,-s dump_cflags) | \
+		$(call Build/RunMake,wpa_supplicant,-s MULTICALL=1 dump_cflags) | \
 		sed -e 's,-n ,,g' -e 's,$(TARGET_CFLAGS),,' \
 	` > $(PKG_BUILD_DIR)/.cflags
 	$(call Build/RunMake,hostapd, \
@@ -294,8 +296,9 @@ Package/hostapd-mini/install = $(Package/hostapd/install)
 
 ifneq ($(LOCAL_TYPE),supplicant)
   define Package/hostapd-utils/install
-	$(INSTALL_DIR) $(1)/usr/sbin
+	$(INSTALL_DIR) $(1)/usr/sbin $(1)/etc/hotplug.d/button
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/hostapd/hostapd_cli $(1)/usr/sbin/
+	$(INSTALL_DATA) ./files/wps-hotplug.sh $(1)/etc/hotplug.d/button/50-wps
   endef
 endif
 

package/hostapd/files/hostapd-full.config

@@ -156,3 +156,5 @@ CONFIG_TLS=internal
 CONFIG_INTERNAL_LIBTOMMATH=y
 CONFIG_INTERNAL_AES=y
 NEED_AES_DEC=y
+
+CONFIG_WPS=y

package/hostapd/files/hostapd.sh

@@ -1,7 +1,7 @@
 hostapd_set_bss_options() {
 	local var="$1"
 	local vif="$2"
-	local enc wpa_group_rekey
+	local enc wpa_group_rekey wps_possible
 
 	config_get enc "$vif" encryption
 	config_get wpa_group_rekey "$vif" wpa_group_rekey
@@ -60,6 +60,7 @@ hostapd_set_bss_options() {
 			else
 				append "$var" "wpa_passphrase=$psk" "$N"
 			fi
+			wps_possible=1
 		;;
 		*wpa*)
 			# required fields? formats?
@@ -76,7 +77,6 @@ hostapd_set_bss_options() {
 			append "$var" "eapol_key_index_workaround=1" "$N"
 			append "$var" "radius_acct_interim_interval=300" "$N"
 			append "$var" "ieee8021x=1" "$N"
-			append "$var" "auth_algs=1" "$N"
 			append "$var" "wpa_key_mgmt=WPA-EAP" "$N"
 			append "$var" "wpa_group_rekey=300" "$N"
 			append "$var" "wpa_gmk_rekey=640" "$N"
@@ -100,6 +100,14 @@ hostapd_set_bss_options() {
 					append "$var" "wep_default_key=0" "$N"
 				;;
 			esac
+			case "$enc" in
+				*shared*)
+					auth_algs=2
+				;;
+				*mixed*)
+					auth_algs=3
+				;;
+			esac
 			wpa=0
 			crypto=
 		;;
@@ -108,6 +116,7 @@ hostapd_set_bss_options() {
 			crypto=
 		;;
 	esac
+	append "$var" "auth_algs=${auth_algs:-1}" "$N"
 	append "$var" "wpa=$wpa" "$N"
 	[ -n "$crypto" ] && append "$var" "wpa_pairwise=$crypto" "$N"
 	[ -n "$wpa_group_rekey" ] && append "$var" "wpa_group_rekey=$wpa_group_rekey" "$N"
@@ -115,10 +124,20 @@ hostapd_set_bss_options() {
 	config_get ssid "$vif" ssid
 	config_get bridge "$vif" bridge
 	config_get ieee80211d "$vif" ieee80211d
+	config_get iapp_interface "$vif" iapp_interface
+
+	config_get_bool wps_pbc "$vif" wps_pushbutton 0
+	[ -n "$wps_possible" -a "$wps_pbc" -gt 0 ] && {
+		append "$var" "eap_server=1" "$N"
+		append "$var" "wps_state=2" "$N"
+		append "$var" "ap_setup_locked=1" "$N"
+		append "$var" "config_methods=push_button" "$N"
+	}
 
 	append "$var" "ssid=$ssid" "$N"
 	[ -n "$bridge" ] && append "$var" "bridge=$bridge" "$N"
 	[ -n "$ieee80211d" ] && append "$var" "ieee80211d=$ieee80211d" "$N"
+	[ -n "$iapp_interface" ] && append "$var" $(uci_get_state network "$iapp_interface" ifname "$iapp_interface") "$N"
 
 	[ "$wpa" -ge "2" ] && config_get ieee80211w "$vif" ieee80211w
 	case "$ieee80211w" in

package/hostapd/files/wpa_supplicant-full.config

@@ -189,7 +189,7 @@ CONFIG_EAP_LEAP=y
 #CONFIG_EAP_TNC=y
 
 # Wi-Fi Protected Setup (WPS)
-#CONFIG_WPS=y
+CONFIG_WPS=y
 
 # EAP-IKEv2
 #CONFIG_EAP_IKEV2=y

package/hostapd/files/wpa_supplicant.sh

@@ -2,6 +2,7 @@ wpa_supplicant_setup_vif() {
 	local vif="$1"
 	local driver="$2"
 	local key="$key"
+	local options="$3"
 
 	# wpa_supplicant should use wext for mac80211 cards
 	[ "$driver" = "mac80211" ] && driver='wext'
@@ -133,5 +134,5 @@ network={
 }
 EOF
 	[ -z "$proto" -a "$key_mgmt" != "NONE" ] || \
-		wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf
+		wpa_supplicant ${bridge:+ -b $bridge} -B -P "/var/run/wifi-${ifname}.pid" -D ${driver:-wext} -i "$ifname" -c /var/run/wpa_supplicant-$ifname.conf $options
 }

package/hostapd/files/wps-hotplug.sh

@@ -0,0 +1,6 @@
+if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then
+	for dir in /var/run/hostapd-*; do
+		[ -d "$dir" ] || continue
+		hostapd_cli -p "$dir" wps_pbc
+	done
+fi

package/hostapd/patches/110-countrycode.patch

@@ -1,6 +1,6 @@
 --- a/src/ap/hostapd.c
 +++ b/src/ap/hostapd.c
-@@ -659,7 +659,6 @@ static int setup_interface(struct hostap
+@@ -660,7 +660,6 @@ static int setup_interface(struct hostap
  		country[3] = '\0';
  		if (hostapd_set_country(hapd, country) < 0) {
  			wpa_printf(MSG_ERROR, "Failed to set country code");

package/hostapd/patches/130-scan_wait.patch

@@ -10,7 +10,7 @@
  /* hostapd.c */
 --- a/src/ap/hostapd.c
 +++ b/src/ap/hostapd.c
-@@ -754,6 +754,9 @@ int hostapd_setup_interface_complete(str
+@@ -755,6 +755,9 @@ int hostapd_setup_interface_complete(str
  	wpa_printf(MSG_DEBUG, "%s: Setup of interface done.",
  		   iface->bss[0]->conf->iface);
  

package/hostapd/patches/200-multicall.patch

@@ -62,7 +62,7 @@
  
  ifndef CONFIG_OS
  ifdef CONFIG_NATIVE_WINDOWS
-@@ -579,6 +580,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
+@@ -581,6 +582,10 @@ ifdef CONFIG_DYNAMIC_EAP_METHODS
  CFLAGS += -DCONFIG_DYNAMIC_EAP_METHODS
  LIBS += -ldl -rdynamic
  endif
@@ -73,7 +73,7 @@
  endif
  
  ifdef CONFIG_AP
-@@ -631,6 +636,12 @@ CFLAGS += -DEAP_SERVER_WSC
+@@ -635,6 +640,12 @@ CFLAGS += -DEAP_SERVER_WSC
  OBJS += ../src/ap/wps_hostapd.o
  OBJS += ../src/eap_server/eap_server_wsc.o
  endif
@@ -86,7 +86,7 @@
  endif
  
  ifdef NEED_RSN_AUTHENTICATOR
-@@ -1262,6 +1273,12 @@ BCHECK=../src/drivers/build.wpa_supplica
+@@ -1270,6 +1281,12 @@ BCHECK=../src/drivers/build.wpa_supplica
  wpa_priv: $(BCHECK) $(OBJS_priv)
  	$(LDO) $(LDFLAGS) -o wpa_priv $(OBJS_priv) $(LIBS)
  
@@ -99,7 +99,7 @@
  wpa_supplicant: .config $(BCHECK) $(OBJS) $(EXTRA_progs)
  	$(LDO) $(LDFLAGS) -o wpa_supplicant $(OBJS) $(LIBS) $(EXTRALIBS)
  
-@@ -1321,6 +1338,12 @@ endif
+@@ -1329,6 +1346,12 @@ endif
  	$(Q)$(CC) -c -o $@ $(CFLAGS) $<
  	@$(E) "  CC " $<
  
@@ -114,7 +114,7 @@
  wpa_cli.exe: wpa_cli
 --- a/src/drivers/driver.h
 +++ b/src/drivers/driver.h
-@@ -2449,8 +2449,8 @@ union wpa_event_data {
+@@ -2465,8 +2465,8 @@ union wpa_event_data {
   * Driver wrapper code should call this function whenever an event is received
   * from the driver.
   */
@@ -169,7 +169,7 @@
  	for (;;) {
 --- a/wpa_supplicant/events.c
 +++ b/wpa_supplicant/events.c
-@@ -1577,8 +1577,8 @@ static void ft_rx_action(struct wpa_supp
+@@ -1582,8 +1582,8 @@ static void ft_rx_action(struct wpa_supp
  #endif /* CONFIG_IEEE80211R */
  
  
@@ -182,7 +182,7 @@
  	u16 reason_code = 0;
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -2223,6 +2223,9 @@ struct wpa_supplicant * wpa_supplicant_g
+@@ -2228,6 +2228,9 @@ struct wpa_supplicant * wpa_supplicant_g
  	return NULL;
  }
  
@@ -192,7 +192,7 @@
  
  /**
   * wpa_supplicant_init - Initialize %wpa_supplicant
-@@ -2241,6 +2244,7 @@ struct wpa_global * wpa_supplicant_init(
+@@ -2246,6 +2249,7 @@ struct wpa_global * wpa_supplicant_init(
  	if (params == NULL)
  		return NULL;
  

package/hostapd/patches/300-timestamp_check.patch

@@ -1,6 +1,6 @@
 --- a/src/tls/x509v3.c
 +++ b/src/tls/x509v3.c
-@@ -1832,8 +1832,11 @@ int x509_certificate_chain_validate(stru
+@@ -1854,8 +1854,11 @@ int x509_certificate_chain_validate(stru
  		if (chain_trusted)
  			continue;
  

package/hostapd/patches/310-scan_ssid.patch

@@ -8,7 +8,7 @@
  	size_t max_ssids;
  	enum wpa_states prev_state;
  
-@@ -311,6 +312,16 @@ static void wpa_supplicant_scan(void *el
+@@ -316,6 +317,16 @@ static void wpa_supplicant_scan(void *el
  	    wpa_s->wpa_state == WPA_INACTIVE)
  		wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
  
@@ -25,7 +25,7 @@
  	/* Find the starting point from which to continue scanning */
  	ssid = wpa_s->conf->ssid;
  	if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) {
-@@ -374,6 +385,9 @@ static void wpa_supplicant_scan(void *el
+@@ -379,6 +390,9 @@ static void wpa_supplicant_scan(void *el
  		int_array_sort_unique(params.freqs);
  	}
  

package/hostapd/patches/320-rescan_immediately.patch

@@ -1,6 +1,6 @@
 --- a/wpa_supplicant/events.c
 +++ b/wpa_supplicant/events.c
-@@ -958,7 +958,7 @@ static void wpa_supplicant_event_scan_re
+@@ -963,7 +963,7 @@ static void wpa_supplicant_event_scan_re
  			wpa_printf(MSG_DEBUG, "Setup a new network");
  			wpa_supplicant_associate(wpa_s, NULL, ssid);
  		} else {

package/hostapd/patches/330-madwifi_merge.patch

@@ -336,7 +336,7 @@
 -	return 0;
 -}
 -
- static int
+-static int
 -set80211param(struct wpa_driver_madwifi_data *drv, int op, int arg,
 -	      int show_err)
 -{
@@ -355,7 +355,7 @@
 -	return 0;
 -}
 -
--static int
+ static int
 -wpa_driver_madwifi_set_wpa_ie(struct wpa_driver_madwifi_data *drv,
 +wpa_driver_madwifi_set_wpa_ie(struct madwifi_driver_data *drv,
  			      const u8 *wpa_ie, size_t wpa_ie_len)
@@ -627,7 +627,7 @@
  	return wpa_driver_wext_get_ssid(drv->wext, ssid);
  }
  
-@@ -1705,14 +1481,14 @@ static int wpa_driver_madwifi_get_ssid(v
+@@ -1705,14 +1481,16 @@ static int wpa_driver_madwifi_get_ssid(v
  static struct wpa_scan_results *
  wpa_driver_madwifi_get_scan_results(void *priv)
  {
@@ -641,10 +641,12 @@
  {
 -	struct wpa_driver_madwifi_data *drv = priv;
 +	struct madwifi_driver_data *drv = priv;
++	if (!drv->wext)
++		return 0;
  	return wpa_driver_wext_set_operstate(drv->wext, state);
  }
  
-@@ -1733,7 +1509,7 @@ static int wpa_driver_madwifi_set_probe_
+@@ -1733,7 +1511,7 @@ static int wpa_driver_madwifi_set_probe_
  
  	ret = set80211priv(priv, IEEE80211_IOCTL_SET_APPIEBUF, probe_req_ie,
  			   sizeof(struct ieee80211req_getset_appiebuf) +
@@ -653,7 +655,7 @@
  
  	os_free(probe_req_ie);
  
-@@ -1743,7 +1519,7 @@ static int wpa_driver_madwifi_set_probe_
+@@ -1743,7 +1521,7 @@ static int wpa_driver_madwifi_set_probe_
  
  static void * wpa_driver_madwifi_init(void *ctx, const char *ifname)
  {
@@ -662,7 +664,7 @@
  
  	drv = os_zalloc(sizeof(*drv));
  	if (drv == NULL)
-@@ -1754,17 +1530,17 @@ static void * wpa_driver_madwifi_init(vo
+@@ -1754,17 +1532,17 @@ static void * wpa_driver_madwifi_init(vo
  
  	drv->ctx = ctx;
  	os_strlcpy(drv->ifname, ifname, sizeof(drv->ifname));
@@ -684,7 +686,7 @@
  		wpa_printf(MSG_DEBUG, "%s: failed to enable WPA support",
  			   __FUNCTION__);
  		goto fail3;
-@@ -1773,7 +1549,7 @@ static void * wpa_driver_madwifi_init(vo
+@@ -1773,7 +1551,7 @@ static void * wpa_driver_madwifi_init(vo
  	return drv;
  
  fail3:
@@ -693,7 +695,7 @@
  fail2:
  	wpa_driver_wext_deinit(drv->wext);
  fail:
-@@ -1784,38 +1560,37 @@ fail:
+@@ -1784,38 +1562,37 @@ fail:
  
  static void wpa_driver_madwifi_deinit(void *priv)
  {
@@ -739,7 +741,7 @@
  #ifdef HOSTAPD
  	.hapd_init		= madwifi_init,
  	.hapd_deinit		= madwifi_deinit,
-@@ -1835,7 +1610,8 @@ const struct wpa_driver_ops wpa_driver_m
+@@ -1835,7 +1612,8 @@ const struct wpa_driver_ops wpa_driver_m
  	.sta_clear_stats        = madwifi_sta_clear_stats,
  	.commit			= madwifi_commit,
  	.set_ap_wps_ie		= madwifi_set_ap_wps_ie,
@@ -749,7 +751,7 @@
  	.get_bssid		= wpa_driver_madwifi_get_bssid,
  	.get_ssid		= wpa_driver_madwifi_get_ssid,
  	.init			= wpa_driver_madwifi_init,
-@@ -1847,5 +1623,5 @@ const struct wpa_driver_ops wpa_driver_m
+@@ -1847,5 +1625,5 @@ const struct wpa_driver_ops wpa_driver_m
  	.disassociate		= wpa_driver_madwifi_disassociate,
  	.associate		= wpa_driver_madwifi_associate,
  	.set_operstate		= wpa_driver_madwifi_set_operstate,

package/hostapd/patches/350-wds_fix.patch

@@ -1,6 +1,6 @@
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -4576,9 +4576,11 @@ static int i802_set_wds_sta(void *priv, 
+@@ -4652,9 +4652,11 @@ static int i802_set_wds_sta(void *priv, 
  	wpa_printf(MSG_DEBUG, "nl80211: Set WDS STA addr=" MACSTR
  		   " aid=%d val=%d name=%s", MAC2STR(addr), aid, val, name);
  	if (val) {
@@ -16,7 +16,7 @@
  	} else {
 --- a/src/ap/ieee802_11.c
 +++ b/src/ap/ieee802_11.c
-@@ -1614,6 +1614,9 @@ static void handle_assoc_cb(struct hosta
+@@ -1627,6 +1627,9 @@ static void handle_assoc_cb(struct hosta
  			       "Could not add STA to kernel driver");
  	}
  

package/hostapd/patches/360-wds_bridge.patch

@@ -21,7 +21,7 @@
  			/* clear to get error below if setting is invalid */
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -4566,7 +4566,8 @@ static int i802_set_sta_vlan(void *priv,
+@@ -4642,7 +4642,8 @@ static int i802_set_sta_vlan(void *priv,
  }
  
  
@@ -31,7 +31,7 @@
  {
  	struct i802_bss *bss = priv;
  	struct wpa_driver_nl80211_data *drv = bss->drv;
-@@ -4580,6 +4581,10 @@ static int i802_set_wds_sta(void *priv, 
+@@ -4656,6 +4657,10 @@ static int i802_set_wds_sta(void *priv, 
  			if (nl80211_create_iface(drv, name, NL80211_IFTYPE_AP_VLAN,
  					 NULL, 1) < 0)
  				return -1;

package/hostapd/patches/370-basic_rates.patch

@@ -1,6 +1,6 @@
 --- a/src/ap/hostapd.c
 +++ b/src/ap/hostapd.c
-@@ -715,6 +715,16 @@ int hostapd_setup_interface_complete(str
+@@ -716,6 +716,16 @@ int hostapd_setup_interface_complete(str
  		}
  	}
  

package/hostapd/patches/380-ap_isolate.patch

@@ -38,7 +38,7 @@
  	 * @freq: Frequency (in MHz) of the channel
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -4263,6 +4263,29 @@ static int i802_set_rate_sets(void *priv
+@@ -4339,6 +4339,29 @@ static int i802_set_rate_sets(void *priv
  	return -ENOBUFS;
  }
  
@@ -68,7 +68,7 @@
  #endif /* HOSTAPD */
  
  
-@@ -5372,6 +5395,7 @@ const struct wpa_driver_ops wpa_driver_n
+@@ -5448,6 +5471,7 @@ const struct wpa_driver_ops wpa_driver_n
  	.set_tx_queue_params = i802_set_tx_queue_params,
  	.set_sta_vlan = i802_set_sta_vlan,
  	.set_wds_sta = i802_set_wds_sta,

package/hostapd/patches/390-nl80211_fixes.patch

@@ -1,6 +1,6 @@
 --- a/src/drivers/driver_nl80211.c
 +++ b/src/drivers/driver_nl80211.c
-@@ -1119,7 +1119,6 @@ nla_put_failure:
+@@ -1135,7 +1135,6 @@ nla_put_failure:
  }
  
  
@@ -8,7 +8,7 @@
  struct wiphy_info_data {
  	int max_scan_ssids;
  	int ap_supported;
-@@ -1231,7 +1230,6 @@ static int wpa_driver_nl80211_capa(struc
+@@ -1247,7 +1246,6 @@ static int wpa_driver_nl80211_capa(struc
  
  	return 0;
  }
@@ -16,7 +16,7 @@
  
  
  static int wpa_driver_nl80211_init_nl(struct wpa_driver_nl80211_data *drv,
-@@ -1371,6 +1369,7 @@ static void * wpa_driver_nl80211_init(vo
+@@ -1411,6 +1409,7 @@ static void * wpa_driver_nl80211_init(vo
  	drv->monitor_ifidx = -1;
  	drv->monitor_sock = -1;
  	drv->ioctl_sock = -1;
@@ -24,7 +24,7 @@
  
  	if (wpa_driver_nl80211_init_nl(drv, ctx)) {
  		os_free(drv);
-@@ -1468,24 +1467,23 @@ wpa_driver_nl80211_finish_drv_init(struc
+@@ -1530,32 +1529,32 @@ wpa_driver_nl80211_finish_drv_init(struc
  	drv->ifindex = if_nametoindex(bss->ifname);
  	drv->first_bss.ifindex = drv->ifindex;
  
@@ -33,23 +33,38 @@
 -		wpa_printf(MSG_DEBUG, "nl80211: Could not configure driver to "
 -			   "use managed mode");
 -	}
--
--	if (linux_set_iface_flags(drv->ioctl_sock, bss->ifname, 1)) {
--		wpa_printf(MSG_ERROR, "Could not set interface '%s' UP",
--			   bss->ifname);
--		return -1;
--	}
 +	if (drv->nlmode == NL80211_IFTYPE_STATION) {
-+		if (wpa_driver_nl80211_set_mode(bss, IEEE80211_MODE_INFRA) < 0)
++		if (wpa_driver_nl80211_set_mode(bss, IEEE80211_MODE_INFRA) < 0) {
-+			wpa_printf(MSG_DEBUG, "nl80211: Could not configure "
++			wpa_printf(MSG_DEBUG, "nl80211: Could not configure driver to "
-+				   "driver to use managed mode");
++				   "use managed mode");
-+
-+		if (linux_set_iface_flags(drv->ioctl_sock, bss->ifname, 1)) {
-+			wpa_printf(MSG_ERROR, "Could not set interface '%s' UP",
-+				   bss->ifname);
-+			return -1;
 +		}
  
+-	if (linux_set_iface_flags(drv->ioctl_sock, bss->ifname, 1)) {
+-		if (rfkill_is_blocked(drv->rfkill)) {
+-			wpa_printf(MSG_DEBUG, "nl80211: Could not yet enable "
+-				   "interface '%s' due to rfkill",
+-				   bss->ifname);
+-			drv->if_disabled = 1;
+-			send_rfkill_event = 1;
+-		} else {
+-			wpa_printf(MSG_ERROR, "nl80211: Could not set "
+-				   "interface '%s' UP", bss->ifname);
+-			return -1;
++		if (linux_set_iface_flags(drv->ioctl_sock, bss->ifname, 1)) {
++			if (rfkill_is_blocked(drv->rfkill)) {
++				wpa_printf(MSG_DEBUG, "nl80211: Could not yet enable "
++					   "interface '%s' due to rfkill",
++					   bss->ifname);
++				drv->if_disabled = 1;
++				send_rfkill_event = 1;
++			} else {
++				wpa_printf(MSG_ERROR, "nl80211: Could not set "
++					   "interface '%s' UP", bss->ifname);
++				return -1;
++			}
+ 		}
+-	}
+ 
 -	if (wpa_driver_nl80211_capa(drv))
 -		return -1;
 +		if (wpa_driver_nl80211_capa(drv))
@@ -64,7 +79,7 @@
  
  	if (nl80211_register_action_frames(drv) < 0) {
  		wpa_printf(MSG_DEBUG, "nl80211: Failed to register Action "
-@@ -2143,13 +2141,9 @@ static int wpa_driver_nl80211_set_key(co
+@@ -2219,13 +2218,9 @@ static int wpa_driver_nl80211_set_key(co
  	 */
  	if (ret || !set_tx || alg == WPA_ALG_NONE)
  		return ret;
@@ -79,7 +94,7 @@
  
  	msg = nlmsg_alloc();
  	if (!msg)
-@@ -2990,7 +2984,8 @@ static void nl80211_remove_iface(struct 
+@@ -3066,7 +3061,8 @@ static void nl80211_remove_iface(struct 
  
  #ifdef HOSTAPD
  	/* stop listening for EAPOL on this interface */
@@ -89,7 +104,7 @@
  #endif /* HOSTAPD */
  
  	msg = nlmsg_alloc();
-@@ -3063,7 +3058,8 @@ static int nl80211_create_iface_once(str
+@@ -3139,7 +3135,8 @@ static int nl80211_create_iface_once(str
  
  #ifdef HOSTAPD
  	/* start listening for EAPOL on this interface */
@@ -99,7 +114,7 @@
  #endif /* HOSTAPD */
  
  	if (addr && iftype != NL80211_IFTYPE_MONITOR &&
-@@ -4766,6 +4762,7 @@ static void *i802_init(struct hostapd_da
+@@ -4842,6 +4839,7 @@ static void *i802_init(struct hostapd_da
  		return NULL;
  
  	drv = bss->drv;

package/hostapd/patches/400-nl80211_sta_auth.patch

@@ -1,6 +1,6 @@
 --- a/wpa_supplicant/wpa_supplicant.c
 +++ b/wpa_supplicant/wpa_supplicant.c
-@@ -543,10 +543,16 @@ void wpa_supplicant_set_state(struct wpa
+@@ -545,10 +545,16 @@ void wpa_supplicant_set_state(struct wpa
  		wpa_s->reassociated_connection = 1;
  		wpa_drv_set_operstate(wpa_s, 1);
  		wpa_s->after_wps = 0;

package/hostapd/patches/410-no_rfkill.patch

@@ -0,0 +1,263 @@
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -75,7 +75,9 @@ struct wpa_driver_nl80211_data {
+ 	int ifindex;
+ 	int if_removed;
+ 	int if_disabled;
++#ifdef CONFIG_RFKILL
+ 	struct rfkill_data *rfkill;
++#endif
+ 	struct wpa_driver_capa capa;
+ 	int has_capability;
+ 
+@@ -1361,7 +1363,7 @@ err1:
+ 	return -1;
+ }
+ 
+-
++#ifdef CONFIG_RFKILL
+ static void wpa_driver_nl80211_rfkill_blocked(void *ctx)
+ {
+ 	wpa_printf(MSG_DEBUG, "nl80211: RFKILL blocked");
+@@ -1383,6 +1385,7 @@ static void wpa_driver_nl80211_rfkill_un
+ 	}
+ 	/* rtnetlink ifup handler will report interface as enabled */
+ }
++#endif /* CONFIG_RFKILL */
+ 
+ 
+ /**
+@@ -1396,7 +1399,9 @@ static void * wpa_driver_nl80211_init(vo
+ {
+ 	struct wpa_driver_nl80211_data *drv;
+ 	struct netlink_config *cfg;
++#ifdef CONFIG_RFKILL
+ 	struct rfkill_config *rcfg;
++#endif
+ 	struct i802_bss *bss;
+ 
+ 	drv = os_zalloc(sizeof(*drv));
+@@ -1434,6 +1439,7 @@ static void * wpa_driver_nl80211_init(vo
+ 		goto failed;
+ 	}
+ 
++#ifdef CONFIG_RFKILL
+ 	rcfg = os_zalloc(sizeof(*rcfg));
+ 	if (rcfg == NULL)
+ 		goto failed;
+@@ -1446,6 +1452,7 @@ static void * wpa_driver_nl80211_init(vo
+ 		wpa_printf(MSG_DEBUG, "nl80211: RFKILL status not available");
+ 		os_free(rcfg);
+ 	}
++#endif /* CONFIG_RFKILL */
+ 
+ 	if (wpa_driver_nl80211_finish_drv_init(drv))
+ 		goto failed;
+@@ -1453,7 +1460,9 @@ static void * wpa_driver_nl80211_init(vo
+ 	return bss;
+ 
+ failed:
++#ifdef CONFIG_RFKILL
+ 	rfkill_deinit(drv->rfkill);
++#endif
+ 	netlink_deinit(drv->netlink);
+ 	if (drv->ioctl_sock >= 0)
+ 		close(drv->ioctl_sock);
+@@ -1514,10 +1523,12 @@ static int nl80211_register_action_frame
+ }
+ 
+ 
++#ifdef CONFIG_RFKILL
+ static void wpa_driver_nl80211_send_rfkill(void *eloop_ctx, void *timeout_ctx)
+ {
+ 	wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL);
+ }
++#endif /* CONFIG_RFKILL */
+ 
+ 
+ static int
+@@ -1536,13 +1547,16 @@ wpa_driver_nl80211_finish_drv_init(struc
+ 		}
+ 
+ 		if (linux_set_iface_flags(drv->ioctl_sock, bss->ifname, 1)) {
++#ifdef CONFIG_RFKILL
+ 			if (rfkill_is_blocked(drv->rfkill)) {
+ 				wpa_printf(MSG_DEBUG, "nl80211: Could not yet enable "
+ 					   "interface '%s' due to rfkill",
+ 					   bss->ifname);
+ 				drv->if_disabled = 1;
+ 				send_rfkill_event = 1;
+-			} else {
++			} else
++#endif
++			{
+ 				wpa_printf(MSG_ERROR, "nl80211: Could not set "
+ 					   "interface '%s' UP", bss->ifname);
+ 				return -1;
+@@ -1567,8 +1581,10 @@ wpa_driver_nl80211_finish_drv_init(struc
+ 	}
+ 
+ 	if (send_rfkill_event) {
++#ifdef CONFIG_RFKILL
+ 		eloop_register_timeout(0, 0, wpa_driver_nl80211_send_rfkill,
+ 				       drv, drv->ctx);
++#endif
+ 	}
+ 
+ 	return 0;
+@@ -1647,7 +1663,9 @@ static void wpa_driver_nl80211_deinit(vo
+ 
+ 	netlink_send_oper_ifla(drv->netlink, drv->ifindex, 0, IF_OPER_UP);
+ 	netlink_deinit(drv->netlink);
++#ifdef CONFIG_RFKILL
+ 	rfkill_deinit(drv->rfkill);
++#endif
+ 
+ 	eloop_cancel_timeout(wpa_driver_nl80211_scan_timeout, drv, drv->ctx);
+ 
+--- a/src/drivers/driver_wext.c
++++ b/src/drivers/driver_wext.c
+@@ -700,7 +700,7 @@ static void wpa_driver_wext_event_rtm_de
+ 	}
+ }
+ 
+-
++#ifdef CONFIG_RFKILL
+ static void wpa_driver_wext_rfkill_blocked(void *ctx)
+ {
+ 	wpa_printf(MSG_DEBUG, "WEXT: RFKILL blocked");
+@@ -722,7 +722,7 @@ static void wpa_driver_wext_rfkill_unblo
+ 	}
+ 	/* rtnetlink ifup handler will report interface as enabled */
+ }
+-
++#endif /* CONFIG_RFKILL */
+ 
+ /**
+  * wpa_driver_wext_init - Initialize WE driver interface
+@@ -735,7 +735,9 @@ void * wpa_driver_wext_init(void *ctx, c
+ {
+ 	struct wpa_driver_wext_data *drv;
+ 	struct netlink_config *cfg;
++#ifdef CONFIG_RFKILL
+ 	struct rfkill_config *rcfg;
++#endif
+ 	char path[128];
+ 	struct stat buf;
+ 
+@@ -769,6 +771,7 @@ void * wpa_driver_wext_init(void *ctx, c
+ 		goto err2;
+ 	}
+ 
++#ifdef CONFIG_RFKILL
+ 	rcfg = os_zalloc(sizeof(*rcfg));
+ 	if (rcfg == NULL)
+ 		goto err3;
+@@ -781,6 +784,7 @@ void * wpa_driver_wext_init(void *ctx, c
+ 		wpa_printf(MSG_DEBUG, "WEXT: RFKILL status not available");
+ 		os_free(rcfg);
+ 	}
++#endif /* CONFIG_RFKILL */
+ 
+ 	drv->mlme_sock = -1;
+ 
+@@ -792,7 +796,9 @@ void * wpa_driver_wext_init(void *ctx, c
+ 	return drv;
+ 
+ err3:
++#ifdef CONFIG_RFKILL
+ 	rfkill_deinit(drv->rfkill);
++#endif
+ 	netlink_deinit(drv->netlink);
+ err2:
+ 	close(drv->ioctl_sock);
+@@ -802,10 +808,12 @@ err1:
+ }
+ 
+ 
++#ifdef CONFIG_RFKILL
+ static void wpa_driver_wext_send_rfkill(void *eloop_ctx, void *timeout_ctx)
+ {
+ 	wpa_supplicant_event(timeout_ctx, EVENT_INTERFACE_DISABLED, NULL);
+ }
++#endif /* CONFIG_RFKILL */
+ 
+ 
+ static int wpa_driver_wext_finish_drv_init(struct wpa_driver_wext_data *drv)
+@@ -813,13 +821,16 @@ static int wpa_driver_wext_finish_drv_in
+ 	int send_rfkill_event = 0;
+ 
+ 	if (linux_set_iface_flags(drv->ioctl_sock, drv->ifname, 1) < 0) {
++#ifdef CONFIG_RFKILL
+ 		if (rfkill_is_blocked(drv->rfkill)) {
+ 			wpa_printf(MSG_DEBUG, "WEXT: Could not yet enable "
+ 				   "interface '%s' due to rfkill",
+ 				   drv->ifname);
+ 			drv->if_disabled = 1;
+ 			send_rfkill_event = 1;
+-		} else {
++		} else
++#endif
++		{
+ 			wpa_printf(MSG_ERROR, "WEXT: Could not set "
+ 				   "interface '%s' UP", drv->ifname);
+ 			return -1;
+@@ -867,8 +878,10 @@ static int wpa_driver_wext_finish_drv_in
+ 			       1, IF_OPER_DORMANT);
+ 
+ 	if (send_rfkill_event) {
++#ifdef CONFIG_RFKILL
+ 		eloop_register_timeout(0, 0, wpa_driver_wext_send_rfkill,
+ 				       drv, drv->ctx);
++#endif
+ 	}
+ 
+ 	return 0;
+@@ -898,7 +911,9 @@ void wpa_driver_wext_deinit(void *priv)
+ 
+ 	netlink_send_oper_ifla(drv->netlink, drv->ifindex, 0, IF_OPER_UP);
+ 	netlink_deinit(drv->netlink);
++#ifdef CONFIG_RFKILL
+ 	rfkill_deinit(drv->rfkill);
++#endif
+ 
+ 	if (drv->mlme_sock >= 0)
+ 		eloop_unregister_read_sock(drv->mlme_sock);
+--- a/src/drivers/drivers.mak
++++ b/src/drivers/drivers.mak
+@@ -31,7 +31,6 @@ NEED_SME=y
+ NEED_AP_MLME=y
+ NEED_NETLINK=y
+ NEED_LINUX_IOCTL=y
+-NEED_RFKILL=y
+ DRV_LIBS += -lnl
+ 
+ ifdef CONFIG_LIBNL20
+@@ -78,7 +77,6 @@ DRV_WPA_CFLAGS += -DCONFIG_DRIVER_WEXT
+ CONFIG_WIRELESS_EXTENSION=y
+ NEED_NETLINK=y
+ NEED_LINUX_IOCTL=y
+-NEED_RFKILL=y
+ endif
+ 
+ ifdef CONFIG_DRIVER_HERMES
+@@ -166,6 +164,7 @@ endif
+ 
+ ifdef NEED_RFKILL
+ DRV_OBJS += ../src/drivers/rfkill.o
++DRV_WPA_CFLAGS += -DCONFIG_RFKILL
+ endif
+ 
+ 
+--- a/src/drivers/driver_wext.h
++++ b/src/drivers/driver_wext.h
+@@ -27,7 +27,9 @@ struct wpa_driver_wext_data {
+ 	int ifindex2;
+ 	int if_removed;
+ 	int if_disabled;
++#ifdef CONFIG_RFKILL
+ 	struct rfkill_data *rfkill;
++#endif
+ 	u8 *assoc_req_ies;
+ 	size_t assoc_req_ies_len;
+ 	u8 *assoc_resp_ies;

package/hostapd/patches/430-supplicant_bridge_fix.patch

@@ -0,0 +1,45 @@
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -410,6 +410,10 @@ static void wpa_driver_nl80211_event_rtm
+ 		return;
+ 	}
+ 
++	if (ifi->ifi_family == AF_BRIDGE &&
++	    drv->nlmode != NL80211_IFTYPE_AP)
++		return;
++
+ 	wpa_printf(MSG_DEBUG, "RTM_NEWLINK: operstate=%d ifi_flags=0x%x "
+ 		   "(%s%s%s%s)",
+ 		   drv->operstate, ifi->ifi_flags,
+@@ -481,6 +485,10 @@ static void wpa_driver_nl80211_event_rtm
+ 	attrlen = len;
+ 	attr = (struct rtattr *) buf;
+ 
++	if (ifi->ifi_family == AF_BRIDGE &&
++	    drv->nlmode != NL80211_IFTYPE_AP)
++		return;
++
+ 	rta_len = RTA_ALIGN(sizeof(struct rtattr));
+ 	while (RTA_OK(attr, attrlen)) {
+ 		if (attr->rta_type == IFLA_IFNAME) {
+@@ -1347,6 +1355,11 @@ static int wpa_driver_nl80211_init_nl(st
+ 	eloop_register_read_sock(nl_socket_get_fd(drv->nl_handle_event),
+ 				 wpa_driver_nl80211_event_receive, drv, ctx);
+ 
++#ifdef HOSTAPD
++	drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int);
++	drv->if_indices = drv->default_if_indices;
++#endif
++
+ 	return 0;
+ 
+ err4:
+@@ -4867,8 +4880,6 @@ static void *i802_init(struct hostapd_da
+ 		br_ifindex = 0;
+ 	}
+ 
+-	drv->num_if_indices = sizeof(drv->default_if_indices) / sizeof(int);
+-	drv->if_indices = drv->default_if_indices;
+ 	for (i = 0; i < params->num_bridge; i++) {
+ 		if (params->bridge[i]) {
+ 			ifindex = if_nametoindex(params->bridge[i]);

package/hostapd/patches/440-mbss_reload_fix.patch

@@ -0,0 +1,89 @@
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -42,37 +42,8 @@ static int hostapd_setup_encryption(char
+ 
+ extern int wpa_debug_level;
+ 
+-
+-int hostapd_reload_config(struct hostapd_iface *iface)
++static int hostapd_reload_bss(struct hostapd_data *hapd)
+ {
+-	struct hostapd_data *hapd = iface->bss[0];
+-	struct hostapd_config *newconf, *oldconf;
+-	size_t j;
+-
+-	if (iface->config_read_cb == NULL)
+-		return -1;
+-	newconf = iface->config_read_cb(iface->config_fname);
+-	if (newconf == NULL)
+-		return -1;
+-
+-	/*
+-	 * Deauthenticate all stations since the new configuration may not
+-	 * allow them to use the BSS anymore.
+-	 */
+-	for (j = 0; j < iface->num_bss; j++)
+-		hostapd_flush_old_stations(iface->bss[j]);
+-
+-#ifndef CONFIG_NO_RADIUS
+-	/* TODO: update dynamic data based on changed configuration
+-	 * items (e.g., open/close sockets, etc.) */
+-	radius_client_flush(hapd->radius, 0);
+-#endif /* CONFIG_NO_RADIUS */
+-
+-	oldconf = hapd->iconf;
+-	hapd->iconf = newconf;
+-	hapd->conf = &newconf->bss[0];
+-	iface->conf = newconf;
+-
+ 	if (hostapd_setup_wpa_psk(hapd->conf)) {
+ 		wpa_printf(MSG_ERROR, "Failed to re-configure WPA PSK "
+ 			   "after reloading configuration");
+@@ -110,10 +81,46 @@ int hostapd_reload_config(struct hostapd
+ 		wpa_printf(MSG_ERROR, "Could not set SSID for kernel driver");
+ 		/* try to continue */
+ 	}
++	wpa_printf(MSG_DEBUG, "Reconfigured interface %s", hapd->conf->iface);
++}
++
++int hostapd_reload_config(struct hostapd_iface *iface)
++{
++	struct hostapd_data *hapd = iface->bss[0];
++	struct hostapd_config *newconf, *oldconf;
++	size_t j;
++
++	if (iface->config_read_cb == NULL)
++		return -1;
++	newconf = iface->config_read_cb(iface->config_fname);
++	if (newconf == NULL)
++		return -1;
++
++	/*
++	 * Deauthenticate all stations since the new configuration may not
++	 * allow them to use the BSS anymore.
++	 */
++	for (j = 0; j < iface->num_bss; j++)
++		hostapd_flush_old_stations(iface->bss[j]);
++
++#ifndef CONFIG_NO_RADIUS
++	/* TODO: update dynamic data based on changed configuration
++	 * items (e.g., open/close sockets, etc.) */
++	radius_client_flush(hapd->radius, 0);
++#endif /* CONFIG_NO_RADIUS */
++
++	oldconf = hapd->iconf;
++	iface->conf = newconf;
++
++	for (j = 0; j < iface->num_bss; j++) {
++		hapd = iface->bss[j];
++		hapd->iconf = newconf;
++		hapd->conf = &newconf->bss[j];
++		hostapd_reload_bss(hapd);
++	}
+ 
+ 	hostapd_config_free(oldconf);
+ 
+-	wpa_printf(MSG_DEBUG, "Reconfigured interface %s", hapd->conf->iface);
+ 
+ 	return 0;
+ }

package/hostapd/patches/450-reload_settings.patch

@@ -0,0 +1,13 @@
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -112,6 +112,10 @@ int hostapd_reload_config(struct hostapd
+ 	oldconf = hapd->iconf;
+ 	iface->conf = newconf;
+ 
++	iface->freq = hostapd_hw_get_freq(hapd, hapd->iconf->channel);
++	if (iface->current_mode)
++		hostapd_prepare_rates(hapd, iface->current_mode);
++
+ 	for (j = 0; j < iface->num_bss; j++) {
+ 		hapd = iface->bss[j];
+ 		hapd->iconf = newconf;

package/hostapd/patches/451-nl80211_del_beacon_bss.patch

@@ -0,0 +1,63 @@
+--- a/src/drivers/driver_nl80211.c
++++ b/src/drivers/driver_nl80211.c
+@@ -1604,23 +1604,41 @@ wpa_driver_nl80211_finish_drv_init(struc
+ }
+ 
+ 
+-static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv)
++static int wpa_driver_nl80211_del_bss_beacon(struct i802_bss *bss)
+ {
++	struct wpa_driver_nl80211_data *drv = bss->drv;
+ 	struct nl_msg *msg;
+ 
++	bss->beacon_set = 0;
++
+ 	msg = nlmsg_alloc();
+ 	if (!msg)
+ 		return -ENOMEM;
+ 
+ 	genlmsg_put(msg, 0, 0, genl_family_get_id(drv->nl80211), 0,
+ 		    0, NL80211_CMD_DEL_BEACON, 0);
+-	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, drv->ifindex);
++	NLA_PUT_U32(msg, NL80211_ATTR_IFINDEX, bss->ifindex);
+ 
+ 	return send_and_recv_msgs(drv, msg, NULL, NULL);
+  nla_put_failure:
++	nlmsg_free(msg);
+ 	return -ENOBUFS;
+ }
+ 
++static int wpa_driver_nl80211_del_beacon(struct wpa_driver_nl80211_data *drv)
++{
++	struct i802_bss *bss;
++
++	for (bss = &drv->first_bss; bss; bss = bss->next)
++		wpa_driver_nl80211_del_bss_beacon(bss);
++}
++
++static int wpa_driver_nl80211_stop_ap(void *priv)
++{
++	struct i802_bss *bss = priv;
++
++	wpa_driver_nl80211_del_beacon(bss->drv);
++}
+ 
+ /**
+  * wpa_driver_nl80211_deinit - Deinitialize nl80211 driver interface
+@@ -5512,4 +5530,5 @@ const struct wpa_driver_ops wpa_driver_n
+ 	.send_ft_action = nl80211_send_ft_action,
+ 	.signal_monitor = nl80211_signal_monitor,
+ 	.send_frame = nl80211_send_frame,
++	.stop_ap = wpa_driver_nl80211_stop_ap,
+ };
+--- a/src/drivers/driver.h
++++ b/src/drivers/driver.h
+@@ -1774,6 +1774,8 @@ struct wpa_driver_ops {
+ 	 */
+ 	int (*send_frame)(void *priv, const u8 *data, size_t data_len,
+ 			  int encrypt);
++
++	int (*stop_ap)(void *priv);
+ };
+ 
+ 

package/hostapd/patches/452-ctrl_iface_reload.patch

@@ -0,0 +1,96 @@
+--- a/hostapd/ctrl_iface.c
++++ b/hostapd/ctrl_iface.c
+@@ -35,6 +35,7 @@
+ #include "ap/wps_hostapd.h"
+ #include "ap/ctrl_iface_ap.h"
+ #include "ctrl_iface.h"
++#include "config_file.h"
+ 
+ 
+ struct wpa_ctrl_dst {
+@@ -45,6 +46,7 @@ struct wpa_ctrl_dst {
+ 	int errors;
+ };
+ 
++static char *reload_opts = NULL;
+ 
+ static void hostapd_ctrl_iface_send(struct hostapd_data *hapd, int level,
+ 				    const char *buf, size_t len);
+@@ -315,6 +317,66 @@ static int hostapd_ctrl_iface_wps_oob(st
+ #endif /* CONFIG_WPS_OOB */
+ #endif /* CONFIG_WPS */
+ 
++static int hostapd_ctrl_iface_set_down(struct hostapd_data *hapd)
++{
++	if (hapd->driver->stop_ap)
++		hapd->driver->stop_ap(hapd->drv_priv);
++	return 0;
++}
++
++static char *get_option(char *opt, char *str)
++{
++	int len = strlen(str);
++
++	if (!strncmp(opt, str, len))
++		return opt + len;
++	else
++		return NULL;
++}
++
++static struct hostapd_config *hostapd_ctrl_iface_config_read(const char *fname)
++{
++	struct hostapd_config *conf;
++	char *opt, *val;
++
++	conf = hostapd_config_read(fname);
++	if (!conf)
++		return NULL;
++
++	for (opt = strtok(reload_opts, " ");
++	     opt;
++		 opt = strtok(NULL, " ")) {
++
++		if ((val = get_option(opt, "channel=")))
++			conf->channel = atoi(val);
++		else if ((val = get_option(opt, "ht_capab=")))
++			conf->ht_capab = atoi(val);
++		else if ((val = get_option(opt, "ht_capab_mask=")))
++			conf->ht_capab &= atoi(val);
++		else if ((val = get_option(opt, "sec_chan=")))
++			conf->secondary_channel = atoi(val);
++		else if ((val = get_option(opt, "hwmode=")))
++			conf->hw_mode = atoi(val);
++		else if ((val = get_option(opt, "ieee80211n=")))
++			conf->ieee80211n = atoi(val);
++		else
++			break;
++	}
++
++	return conf;
++}
++
++static int hostapd_ctrl_iface_reload(struct hostapd_data *hapd, char *txt)
++{
++	struct hostapd_iface *iface = hapd->iface;
++
++	iface->config_read_cb = hostapd_ctrl_iface_config_read;
++	reload_opts = txt;
++
++	hostapd_reload_config(iface);
++
++	iface->config_read_cb = hostapd_config_read;
++}
+ 
+ static void hostapd_ctrl_iface_receive(int sock, void *eloop_ctx,
+ 				       void *sock_ctx)
+@@ -379,6 +441,10 @@ static void hostapd_ctrl_iface_receive(i
+ 				reply_len += res;
+ 		}
+ #endif /* CONFIG_NO_RADIUS */
++	} else if (os_strcmp(buf, "DOWN") == 0) {
++		hostapd_ctrl_iface_set_down(hapd);
++	} else if (os_strncmp(buf, "RELOAD ", 7) == 0) {
++		hostapd_ctrl_iface_reload(hapd, buf + 7);
+ 	} else if (os_strcmp(buf, "STA-FIRST") == 0) {
+ 		reply_len = hostapd_ctrl_iface_sta_first(hapd, reply,
+ 							 reply_size);

package/hostapd/patches/453-ap_sta_support.patch

@@ -0,0 +1,211 @@
+--- a/wpa_supplicant/wpa_supplicant_i.h
++++ b/wpa_supplicant/wpa_supplicant_i.h
+@@ -98,6 +98,8 @@ struct wpa_interface {
+ 	 * receiving of EAPOL frames from an additional interface.
+ 	 */
+ 	const char *bridge_ifname;
++
++	const char *hostapd_ctrl;
+ };
+ 
+ /**
+@@ -316,6 +318,8 @@ struct wpa_supplicant {
+ #endif /* CONFIG_CTRL_IFACE_DBUS_NEW */
+ 	char bridge_ifname[16];
+ 
++	struct wpa_ctrl *hostapd;
++
+ 	char *confname;
+ 	struct wpa_config *conf;
+ 	int countermeasures;
+--- a/wpa_supplicant/Makefile
++++ b/wpa_supplicant/Makefile
+@@ -51,6 +51,11 @@ OBJS_p += ../src/utils/wpa_debug.o
+ OBJS_p += ../src/utils/wpabuf.o
+ OBJS_c = wpa_cli.o ../src/common/wpa_ctrl.o
+ 
++ifdef MULTICALL
++OBJS += ../src/common/wpa_ctrl.o
++CFLAGS += -DMULTICALL
++endif
++
+ -include .config
+ -include $(if $(MULTICALL),../hostapd/.config)
+ 
+--- a/wpa_supplicant/wpa_supplicant.c
++++ b/wpa_supplicant/wpa_supplicant.c
+@@ -120,6 +120,55 @@ extern int wpa_debug_show_keys;
+ extern int wpa_debug_timestamp;
+ extern struct wpa_driver_ops *wpa_drivers[];
+ 
++#ifdef MULTICALL
++static int hostapd_stop(struct wpa_supplicant *wpa_s)
++{
++	const char *cmd = "DOWN";
++	char buf[256];
++	int len = sizeof(buf);
++
++	if (wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL) < 0) {
++		wpa_printf(MSG_ERROR, "\nFailed to stop hostapd AP interfaces\n");
++		return -1;
++	}
++	return 0;
++}
++
++static int hostapd_reload(struct wpa_supplicant *wpa_s, struct wpa_bss *bss)
++{
++	char *cmd = NULL;
++	char buf[256];
++	int len = sizeof(buf);
++	int channel, hw_mode;
++	int ret;
++
++	if (!bss)
++		return;
++
++	if (bss->freq < 4000) {
++		hw_mode = HOSTAPD_MODE_IEEE80211G;
++		channel = (bss->freq - 2407) / 5;
++	} else {
++		hw_mode = HOSTAPD_MODE_IEEE80211A;
++		channel = (bss->freq - 5000) / 5;
++	}
++
++	if (asprintf(&cmd, "RELOAD channel=%d sec_chan=0 hw_mode=%d ieee80211n=%d",
++		     channel, hw_mode, !!bss->ht_capab) < 0) {
++		return -1;
++	}
++
++	ret = wpa_ctrl_request(wpa_s->hostapd, cmd, os_strlen(cmd), buf, &len, NULL);
++	free(cmd);
++
++	if (ret < 0) {
++		wpa_printf(MSG_ERROR, "\nFailed to reload hostapd AP interfaces\n");
++		return -1;
++	}
++	return 0;
++}
++#endif
++
+ /* Configure default/group WEP keys for static WEP */
+ int wpa_set_wep_keys(struct wpa_supplicant *wpa_s, struct wpa_ssid *ssid)
+ {
+@@ -548,8 +597,16 @@ void wpa_supplicant_set_state(struct wpa
+ #ifndef IEEE8021X_EAPOL
+ 		wpa_drv_set_supp_port(wpa_s, 1);
+ #endif
++#ifdef MULTICALL
++		if (wpa_s->hostapd)
++			hostapd_reload(wpa_s, wpa_s->current_bss);
++#endif
+ 	} else if (state == WPA_DISCONNECTED || state == WPA_ASSOCIATING ||
+ 		   state == WPA_ASSOCIATED) {
++#ifdef MULTICALL
++		if (wpa_s->hostapd)
++			hostapd_stop(wpa_s);
++#endif
+ 		wpa_s->new_connection = 1;
+ 		wpa_drv_set_operstate(wpa_s, 0);
+ #ifndef IEEE8021X_EAPOL
+@@ -1957,6 +2014,21 @@ static int wpa_supplicant_init_iface(str
+ 		os_strlcpy(wpa_s->bridge_ifname, iface->bridge_ifname,
+ 			   sizeof(wpa_s->bridge_ifname));
+ 	}
++#ifdef MULTICALL
++	if (iface->hostapd_ctrl) {
++		char *cmd = "DOWN";
++		char buf[256];
++		int len = sizeof(buf);
++
++		wpa_s->hostapd = wpa_ctrl_open(iface->hostapd_ctrl);
++		if (!wpa_s->hostapd) {
++			wpa_printf(MSG_ERROR, "\nFailed to connect to hostapd\n");
++			return -1;
++		}
++		if (hostapd_stop(wpa_s) < 0)
++			return -1;
++	}
++#endif
+ 
+ 	/* RSNA Supplicant Key Management - INITIALIZE */
+ 	eapol_sm_notify_portEnabled(wpa_s->eapol, FALSE);
+--- a/wpa_supplicant/bss.c
++++ b/wpa_supplicant/bss.c
+@@ -17,6 +17,7 @@
+ #include "utils/common.h"
+ #include "utils/eloop.h"
+ #include "common/ieee802_11_defs.h"
++#include "common/ieee802_11_common.h"
+ #include "drivers/driver.h"
+ #include "wpa_supplicant_i.h"
+ #include "config.h"
+@@ -89,6 +90,8 @@ struct wpa_bss * wpa_bss_get(struct wpa_
+ 
+ static void wpa_bss_copy_res(struct wpa_bss *dst, struct wpa_scan_res *src)
+ {
++	struct ieee80211_ht_capabilities *capab;
++	struct ieee802_11_elems elems;
+ 	os_time_t usec;
+ 
+ 	dst->flags = src->flags;
+@@ -101,6 +104,12 @@ static void wpa_bss_copy_res(struct wpa_
+ 	dst->level = src->level;
+ 	dst->tsf = src->tsf;
+ 
++	memset(&elems, 0, sizeof(elems));
++	ieee802_11_parse_elems((u8 *) (src + 1), src->ie_len, &elems, 0);
++	capab = (struct ieee80211_ht_capabilities *) elems.ht_capabilities;
++	if (capab)
++		dst->ht_capab = le_to_host16(capab->ht_capabilities_info);
++
+ 	os_get_time(&dst->last_update);
+ 	dst->last_update.sec -= src->age / 1000;
+ 	usec = (src->age % 1000) * 1000;
+--- a/wpa_supplicant/bss.h
++++ b/wpa_supplicant/bss.h
+@@ -56,6 +56,7 @@ struct wpa_bss {
+ 	unsigned int flags;
+ 	u8 bssid[ETH_ALEN];
+ 	u8 ssid[32];
++	u16 ht_capab;
+ 	size_t ssid_len;
+ 	int freq;
+ 	u16 beacon_int;
+--- a/wpa_supplicant/main.c
++++ b/wpa_supplicant/main.c
+@@ -31,7 +31,7 @@ static void usage(void)
+ 	       "usage:\n"
+ 	       "  wpa_supplicant [-BddhKLqqstuvW] [-P<pid file>] "
+ 	       "[-g<global ctrl>] \\\n"
+-	       "        -i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] "
++	       "        -i<ifname> -c<config file> [-C<ctrl>] [-D<driver>] [-H<hostapd path>]"
+ 	       "[-p<driver_param>] \\\n"
+ 	       "        [-b<br_ifname>] [-f<debug file>] \\\n"
+ 	       "        [-o<override driver>] [-O<override ctrl>] \\\n"
+@@ -67,6 +67,7 @@ static void usage(void)
+ #endif /* CONFIG_DEBUG_SYSLOG */
+ 	printf("  -t = include timestamp in debug messages\n"
+ 	       "  -h = show this help text\n"
++		   "  -H = connect to a hostapd instance to manage state changes\n"
+ 	       "  -L = show license (GPL and BSD)\n"
+ 	       "  -o = override driver parameter for new interfaces\n"
+ 	       "  -O = override ctrl_interface parameter for new interfaces\n"
+@@ -143,7 +144,7 @@ int main(int argc, char *argv[])
+ 	wpa_supplicant_fd_workaround();
+ 
+ 	for (;;) {
+-		c = getopt(argc, argv, "b:Bc:C:D:df:g:hi:KLNo:O:p:P:qstuvW");
++		c = getopt(argc, argv, "b:Bc:C:D:df:g:hH:i:KLNo:O:p:P:qstuvW");
+ 		if (c < 0)
+ 			break;
+ 		switch (c) {
+@@ -184,6 +185,9 @@ int main(int argc, char *argv[])
+ 			usage();
+ 			exitcode = 0;
+ 			goto out;
++		case 'H':
++			iface->hostapd_ctrl = optarg;
++			break;
+ 		case 'i':
+ 			iface->ifname = optarg;
+ 			break;

package/hostapd/patches/460-oper_state_fix.patch

@@ -0,0 +1,25 @@
+From: Jouni Malinen <jouni.malinen@atheros.com>
+Date: Tue, 26 Oct 2010 13:30:28 +0000 (+0300)
+Subject: hostapd: Set operstate UP when initializing AP mode
+X-Git-Url: http://w1.fi/gitweb/gitweb.cgi?p=hostap.git;a=commitdiff_plain;h=e11f5a2cbc333113a3a1cc1aeea7f698c3936ca3
+
+hostapd: Set operstate UP when initializing AP mode
+
+This is needed to avoid problems with other applications setting and
+leaving the interface to IF_OPER_DORMANT state. In AP mode, the interface
+is ready immediately after the keys are set, so we better make sure the
+DORMANT state does not prevent normal operations after that.
+---
+
+--- a/src/ap/hostapd.c
++++ b/src/ap/hostapd.c
+@@ -622,6 +622,9 @@ static int hostapd_setup_bss(struct host
+ 
+ 	ieee802_11_set_beacon(hapd);
+ 
++	if (hapd->driver && hapd->driver->set_operstate)
++		hapd->driver->set_operstate(hapd->drv_priv, 1);
++
+ 	return 0;
+ }
+ 

package/hotplug2/Makefile

@@ -15,7 +15,7 @@ PKG_RELEASE:=2
 PKG_SOURCE_PROTO:=svn
 PKG_SOURCE_VERSION:=$(PKG_REV)
 PKG_SOURCE_SUBDIR:=hotplug2-$(PKG_VERSION)
-PKG_SOURCE_URL:=http://svn.nomi.cz/svn/isteve/hotplug2 
+PKG_SOURCE_URL:=http://svn.nomi.cz/svn/isteve/hotplug2
 PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
 #PKG_SOURCE_URL:=http://isteve.bofh.cz/~isteve/hotplug2
 #PKG_MD5SUM:=ea2c01d027b4002e4e6b0ff266f51a51
@@ -36,6 +36,10 @@ define Package/hotplug2/description
  This is an implementation of Hotplug2-1.0-beta
 endef
 
+define Package/hotplug2/conffiles
+/etc/hotplug2.rules
+endef
+
 MAKE_FLAGS += \
 	COPTS="$(TARGET_CFLAGS)" \
 	STATIC_WORKER="fork"

package/iproute2/Makefile

@@ -30,6 +30,10 @@ $(call Package/iproute2/Default)
   TITLE:=Routing control utility
 endef
 
+define Package/ip/conffiles
+/etc/iproute2/rt_tables
+endef
+
 define Package/tc
 $(call Package/iproute2/Default)
   TITLE:=Traffic control utility

package/iptables/patches/011-iprange-linux-2.4-compat.patch

@@ -0,0 +1,24 @@
+--- a/extensions/libxt_iprange.c
++++ b/extensions/libxt_iprange.c
+@@ -96,7 +96,8 @@ static int iprange_parse(int c, char **a
+ 		if (invert)
+ 			info->flags |= IPRANGE_SRC_INV;
+ 		iprange_parse_range(optarg, range, NFPROTO_IPV4, "--src-range");
+-
++		info->src.min_ip = range[0].in.s_addr;
++		info->src.max_ip = range[1].in.s_addr;
+ 		break;
+ 
+ 	case '2':
+@@ -110,8 +111,9 @@ static int iprange_parse(int c, char **a
+ 		if (invert)
+ 			info->flags |= IPRANGE_DST_INV;
+ 
+-		iprange_parse_range(optarg, range, NFPROTO_IPV4, "--src-range");
+-
++		iprange_parse_range(optarg, range, NFPROTO_IPV4, "--dst-range");
++		info->dst.min_ip = range[0].in.s_addr;
++		info->dst.max_ip = range[1].in.s_addr;
+ 		break;
+ 
+ 	default:

package/iw/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=iw
-PKG_VERSION:=0.9.19
+PKG_VERSION:=0.9.21
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:=http://wireless.kernel.org/download/iw/
-PKG_MD5SUM:=3b88743f9c6ce8a7e2f5fd7d18fdea42
+PKG_MD5SUM:=726db5f1fd6bc316434414770513ef81
 PKG_BUILD_DEPENDS:=mac80211
 
 include $(INCLUDE_DIR)/package.mk
@@ -48,11 +48,9 @@ MAKE_FLAGS += \
 	LIBS="-lm -lnl-tiny" \
 	V=1
 
-ifneq ($(CONFIG_LINUX_2_6),)
+define Package/iw/install
-  define Package/iw/install
 	$(INSTALL_DIR) $(1)/usr/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/iw $(1)/usr/sbin/
-  endef
+endef
-endif
 
 $(eval $(call BuildPackage,iw))

package/iw/patches/001-nl80211_sync.patch

@@ -0,0 +1,183 @@
+--- a/nl80211.h
++++ b/nl80211.h
+@@ -295,7 +295,9 @@
+  *	auth and assoc steps. For this, you need to specify the SSID in a
+  *	%NL80211_ATTR_SSID attribute, and can optionally specify the association
+  *	IEs in %NL80211_ATTR_IE, %NL80211_ATTR_AUTH_TYPE, %NL80211_ATTR_MAC,
+- *	%NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_CONTROL_PORT.
++ *	%NL80211_ATTR_WIPHY_FREQ, %NL80211_ATTR_CONTROL_PORT,
++ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE and
++ *	%NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT.
+  *	It is also sent as an event, with the BSSID and response IEs when the
+  *	connection is established or failed to be established. This can be
+  *	determined by the STATUS_CODE attribute.
+@@ -313,8 +315,8 @@
+  *	channel for the specified amount of time. This can be used to do
+  *	off-channel operations like transmit a Public Action frame and wait for
+  *	a response while being associated to an AP on another channel.
+- *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
+- *	radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
++ *	%NL80211_ATTR_IFINDEX is used to specify which interface (and thus
++ *	radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
+  *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
+  *	optionally used to specify additional channel parameters.
+  *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
+@@ -385,6 +387,8 @@
+  *	of any other interfaces, and other interfaces will again take
+  *	precedence when they are used.
+  *
++ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
++ *
+  * @NL80211_CMD_MAX: highest used command number
+  * @__NL80211_CMD_AFTER_LAST: internal use
+  */
+@@ -487,6 +491,7 @@ enum nl80211_commands {
+ 	NL80211_CMD_NOTIFY_CQM,
+ 
+ 	NL80211_CMD_SET_CHANNEL,
++	NL80211_CMD_SET_WDS_PEER,
+ 
+ 	/* add new commands above here */
+ 
+@@ -686,6 +691,15 @@ enum nl80211_commands {
+  *	request, the driver will assume that the port is unauthorized until
+  *	authorized by user space. Otherwise, port is marked authorized by
+  *	default in station mode.
++ * @NL80211_ATTR_CONTROL_PORT_ETHERTYPE: A 16-bit value indicating the
++ *	ethertype that will be used for key negotiation. It can be
++ *	specified with the associate and connect commands. If it is not
++ *	specified, the value defaults to 0x888E (PAE, 802.1X). This
++ *	attribute is also used as a flag in the wiphy information to
++ *	indicate that protocols other than PAE are supported.
++ * @NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT: When included along with
++ *	%NL80211_ATTR_CONTROL_PORT_ETHERTYPE, indicates that the custom
++ *	ethertype frames used for key negotiation must not be encrypted.
+  *
+  * @NL80211_ATTR_TESTDATA: Testmode data blob, passed through to the driver.
+  *	We recommend using nested, driver-specific attributes within this.
+@@ -787,6 +801,11 @@ enum nl80211_commands {
+  *      This is used in association with @NL80211_ATTR_WIPHY_TX_POWER_SETTING
+  *      for non-automatic settings.
+  *
++ * @NL80211_ATTR_SUPPORT_IBSS_RSN: The device supports IBSS RSN, which mostly
++ *	means support for per-station GTKs.
++ *
++ * @NL80211_ATTR_MCAST_RATE: Multicast tx rate (in 100 kbps) for IBSS
++ *
+  * @NL80211_ATTR_MAX: highest attribute number currently defined
+  * @__NL80211_ATTR_AFTER_LAST: internal use
+  */
+@@ -951,6 +970,13 @@ enum nl80211_attrs {
+ 	NL80211_ATTR_RX_FRAME_TYPES,
+ 	NL80211_ATTR_FRAME_TYPE,
+ 
++	NL80211_ATTR_CONTROL_PORT_ETHERTYPE,
++	NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT,
++
++	NL80211_ATTR_SUPPORT_IBSS_RSN,
++
++	NL80211_ATTR_MCAST_RATE,
++
+ 	/* add attributes here, update the policy in nl80211.c */
+ 
+ 	__NL80211_ATTR_AFTER_LAST,
+@@ -1006,6 +1032,8 @@ enum nl80211_attrs {
+  * @NL80211_IFTYPE_WDS: wireless distribution interface
+  * @NL80211_IFTYPE_MONITOR: monitor interface receiving all frames
+  * @NL80211_IFTYPE_MESH_POINT: mesh point
++ * @NL80211_IFTYPE_P2P_CLIENT: P2P client
++ * @NL80211_IFTYPE_P2P_GO: P2P group owner
+  * @NL80211_IFTYPE_MAX: highest interface type number currently defined
+  * @NUM_NL80211_IFTYPES: number of defined interface types
+  *
+@@ -1022,6 +1050,8 @@ enum nl80211_iftype {
+ 	NL80211_IFTYPE_WDS,
+ 	NL80211_IFTYPE_MONITOR,
+ 	NL80211_IFTYPE_MESH_POINT,
++	NL80211_IFTYPE_P2P_CLIENT,
++	NL80211_IFTYPE_P2P_GO,
+ 
+ 	/* keep last */
+ 	NUM_NL80211_IFTYPES,
+@@ -1111,6 +1141,8 @@ enum nl80211_rate_info {
+  * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
+  * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
+  *	station)
++ * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
++ * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
+  */
+ enum nl80211_sta_info {
+ 	__NL80211_STA_INFO_INVALID,
+@@ -1124,6 +1156,8 @@ enum nl80211_sta_info {
+ 	NL80211_STA_INFO_TX_BITRATE,
+ 	NL80211_STA_INFO_RX_PACKETS,
+ 	NL80211_STA_INFO_TX_PACKETS,
++	NL80211_STA_INFO_TX_RETRIES,
++	NL80211_STA_INFO_TX_FAILED,
+ 
+ 	/* keep last */
+ 	__NL80211_STA_INFO_AFTER_LAST,
+@@ -1382,6 +1416,17 @@ enum nl80211_reg_rule_flags {
+  * @__NL80211_SURVEY_INFO_INVALID: attribute number 0 is reserved
+  * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
+  * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
++ * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
++ *	spent on this channel
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
++ *	channel was sensed busy (either due to activity or energy detect)
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
++ *	channel was sensed busy
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
++ *	receiving data
++ * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
++ *	transmitting data
+  * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+  *	currently defined
+  * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
+@@ -1390,6 +1435,12 @@ enum nl80211_survey_info {
+ 	__NL80211_SURVEY_INFO_INVALID,
+ 	NL80211_SURVEY_INFO_FREQUENCY,
+ 	NL80211_SURVEY_INFO_NOISE,
++	NL80211_SURVEY_INFO_IN_USE,
++	NL80211_SURVEY_INFO_CHANNEL_TIME,
++	NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
++	NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
++	NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
++	NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
+ 
+ 	/* keep last */
+ 	__NL80211_SURVEY_INFO_AFTER_LAST,
+@@ -1636,11 +1687,14 @@ enum nl80211_auth_type {
+  * @NL80211_KEYTYPE_GROUP: Group (broadcast/multicast) key
+  * @NL80211_KEYTYPE_PAIRWISE: Pairwise (unicast/individual) key
+  * @NL80211_KEYTYPE_PEERKEY: PeerKey (DLS)
++ * @NUM_NL80211_KEYTYPES: number of defined key types
+  */
+ enum nl80211_key_type {
+ 	NL80211_KEYTYPE_GROUP,
+ 	NL80211_KEYTYPE_PAIRWISE,
+ 	NL80211_KEYTYPE_PEERKEY,
++
++	NUM_NL80211_KEYTYPES
+ };
+ 
+ /**
+@@ -1671,6 +1725,9 @@ enum nl80211_wpa_versions {
+  *	CCMP keys, each six bytes in little endian
+  * @NL80211_KEY_DEFAULT: flag indicating default key
+  * @NL80211_KEY_DEFAULT_MGMT: flag indicating default management key
++ * @NL80211_KEY_TYPE: the key type from enum nl80211_key_type, if not
++ *	specified the default depends on whether a MAC address was
++ *	given with the command using the key or not (u32)
+  * @__NL80211_KEY_AFTER_LAST: internal
+  * @NL80211_KEY_MAX: highest key attribute
+  */
+@@ -1682,6 +1739,7 @@ enum nl80211_key_attributes {
+ 	NL80211_KEY_SEQ,
+ 	NL80211_KEY_DEFAULT,
+ 	NL80211_KEY_DEFAULT_MGMT,
++	NL80211_KEY_TYPE,
+ 
+ 	/* keep last */
+ 	__NL80211_KEY_AFTER_LAST,

package/iw/patches/001-sync_nl80211_h.patch

@@ -1,167 +0,0 @@
---- a/nl80211.h
-+++ b/nl80211.h
-@@ -270,6 +270,35 @@
-  * @NL80211_CMD_SET_WIPHY_NETNS: Set a wiphy's netns. Note that all devices
-  *	associated with this wiphy must be down and will follow.
-  *
-+ * @NL80211_CMD_REMAIN_ON_CHANNEL: Request to remain awake on the specified
-+ *	channel for the specified amount of time. This can be used to do
-+ *	off-channel operations like transmit a Public Action frame and wait for
-+ *	a response while being associated to an AP on another channel.
-+ *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify which
-+ *	radio is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the
-+ *	frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be
-+ *	optionally used to specify additional channel parameters.
-+ *	%NL80211_ATTR_DURATION is used to specify the duration in milliseconds
-+ *	to remain on the channel. This command is also used as an event to
-+ *	notify when the requested duration starts (it may take a while for the
-+ *	driver to schedule this time due to other concurrent needs for the
-+ *	radio).
-+ *	When called, this operation returns a cookie (%NL80211_ATTR_COOKIE)
-+ *	that will be included with any events pertaining to this request;
-+ *	the cookie is also used to cancel the request.
-+ * @NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL: This command can be used to cancel a
-+ *	pending remain-on-channel duration if the desired operation has been
-+ *	completed prior to expiration of the originally requested duration.
-+ *	%NL80211_ATTR_WIPHY or %NL80211_ATTR_IFINDEX is used to specify the
-+ *	radio. The %NL80211_ATTR_COOKIE attribute must be given as well to
-+ *	uniquely identify the request.
-+ *	This command is also used as an event to notify when a requested
-+ *	remain-on-channel duration has expired.
-+ *
-+ * @NL80211_CMD_SET_TX_BITRATE_MASK: Set the mask of rates to be used in TX
-+ *	rate selection. %NL80211_ATTR_IFINDEX is used to specify the interface
-+ *	and @NL80211_ATTR_TX_RATES the set of allowed rates.
-+ *
-  * @NL80211_CMD_MAX: highest used command number
-  * @__NL80211_CMD_AFTER_LAST: internal use
-  */
-@@ -349,6 +378,15 @@ enum nl80211_commands {
- 	NL80211_CMD_GET_SURVEY,
- 	NL80211_CMD_NEW_SURVEY_RESULTS,
- 
-+	NL80211_CMD_SET_PMKSA,
-+	NL80211_CMD_DEL_PMKSA,
-+	NL80211_CMD_FLUSH_PMKSA,
-+
-+	NL80211_CMD_REMAIN_ON_CHANNEL,
-+	NL80211_CMD_CANCEL_REMAIN_ON_CHANNEL,
-+
-+	NL80211_CMD_SET_TX_BITRATE_MASK,
-+
- 	/* add new commands above here */
- 
- 	/* used to define NL80211_CMD_MAX below */
-@@ -398,6 +436,8 @@ enum nl80211_commands {
-  * @NL80211_ATTR_WIPHY_RTS_THRESHOLD: RTS threshold (TX frames with length
-  *	larger than or equal to this use RTS/CTS handshake); allowed range:
-  *	0..65536, disable with (u32)-1; dot11RTSThreshold; u32
-+ * @NL80211_ATTR_WIPHY_COVERAGE_CLASS: Coverage Class as defined by IEEE 802.11
-+ *	section 7.3.2.9; dot11CoverageClass; u8
-  *
-  * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on
-  * @NL80211_ATTR_IFNAME: network interface name
-@@ -598,6 +638,21 @@ enum nl80211_commands {
-  *      the survey response for %NL80211_CMD_GET_SURVEY, nested attribute
-  *      containing info as possible, see &enum survey_info.
-  *
-+ * @NL80211_ATTR_PMKID: PMK material for PMKSA caching.
-+ * @NL80211_ATTR_MAX_NUM_PMKIDS: maximum number of PMKIDs a firmware can
-+ *	cache, a wiphy attribute.
-+ *
-+ * @NL80211_ATTR_DURATION: Duration of an operation in milliseconds, u32.
-+ *
-+ * @NL80211_ATTR_COOKIE: Generic 64-bit cookie to identify objects.
-+ *
-+ * @NL80211_ATTR_TX_RATES: Nested set of attributes
-+ *	(enum nl80211_tx_rate_attributes) describing TX rates per band. The
-+ *	enum nl80211_band value is used as the index (nla_type() of the nested
-+ *	data. If a band is not included, it will be configured to allow all
-+ *	rates based on negotiated supported rates information. This attribute
-+ *	is used with %NL80211_CMD_SET_TX_BITRATE_MASK.
-+ *
-  * @NL80211_ATTR_MAX: highest attribute number currently defined
-  * @__NL80211_ATTR_AFTER_LAST: internal use
-  */
-@@ -732,6 +787,17 @@ enum nl80211_attrs {
- 
- 	NL80211_ATTR_SURVEY_INFO,
- 
-+	NL80211_ATTR_PMKID,
-+	NL80211_ATTR_MAX_NUM_PMKIDS,
-+
-+	NL80211_ATTR_DURATION,
-+
-+	NL80211_ATTR_COOKIE,
-+
-+	NL80211_ATTR_WIPHY_COVERAGE_CLASS,
-+
-+	NL80211_ATTR_TX_RATES,
-+
- 	/* add attributes here, update the policy in nl80211.c */
- 
- 	__NL80211_ATTR_AFTER_LAST,
-@@ -1312,13 +1378,20 @@ enum nl80211_channel_type {
-  * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16)
-  * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16)
-  * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the
-- *	raw information elements from the probe response/beacon (bin)
-+ *	raw information elements from the probe response/beacon (bin);
-+ *	if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are
-+ *	from a Probe Response frame; otherwise they are from a Beacon frame.
-+ *	However, if the driver does not indicate the source of the IEs, these
-+ *	IEs may be from either frame subtype.
-  * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon
-  *	in mBm (100 * dBm) (s32)
-  * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon
-  *	in unspecified units, scaled to 0..100 (u8)
-  * @NL80211_BSS_STATUS: status, if this BSS is "used"
-  * @NL80211_BSS_SEEN_MS_AGO: age of this BSS entry in ms
-+ * @NL80211_BSS_BEACON_IES: binary attribute containing the raw information
-+ *	elements from a Beacon frame (bin); not present if no Beacon frame has
-+ *	yet been received
-  * @__NL80211_BSS_AFTER_LAST: internal
-  * @NL80211_BSS_MAX: highest BSS attribute
-  */
-@@ -1334,6 +1407,7 @@ enum nl80211_bss {
- 	NL80211_BSS_SIGNAL_UNSPEC,
- 	NL80211_BSS_STATUS,
- 	NL80211_BSS_SEEN_MS_AGO,
-+	NL80211_BSS_BEACON_IES,
- 
- 	/* keep last */
- 	__NL80211_BSS_AFTER_LAST,
-@@ -1431,4 +1505,33 @@ enum nl80211_key_attributes {
- 	NL80211_KEY_MAX = __NL80211_KEY_AFTER_LAST - 1
- };
- 
-+/**
-+ * enum nl80211_tx_rate_attributes - TX rate set attributes
-+ * @__NL80211_TXRATE_INVALID: invalid
-+ * @NL80211_TXRATE_LEGACY: Legacy (non-MCS) rates allowed for TX rate selection
-+ *	in an array of rates as defined in IEEE 802.11 7.3.2.2 (u8 values with
-+ *	1 = 500 kbps) but without the IE length restriction (at most
-+ *	%NL80211_MAX_SUPP_RATES in a single array).
-+ * @__NL80211_TXRATE_AFTER_LAST: internal
-+ * @NL80211_TXRATE_MAX: highest TX rate attribute
-+ */
-+enum nl80211_tx_rate_attributes {
-+	__NL80211_TXRATE_INVALID,
-+	NL80211_TXRATE_LEGACY,
-+
-+	/* keep last */
-+	__NL80211_TXRATE_AFTER_LAST,
-+	NL80211_TXRATE_MAX = __NL80211_TXRATE_AFTER_LAST - 1
-+};
-+
-+/**
-+ * enum nl80211_band - Frequency band
-+ * @NL80211_BAND_2GHZ - 2.4 GHz ISM band
-+ * @NL80211_BAND_5GHZ - around 5 GHz band (4.9 - 5.7 GHz)
-+ */
-+enum nl80211_band {
-+	NL80211_BAND_2GHZ,
-+	NL80211_BAND_5GHZ,
-+};
-+
- #endif /* __LINUX_NL80211_H */

package/iw/patches/100-coverage_class.patch

@@ -1,81 +0,0 @@
---- a/info.c
-+++ b/info.c
-@@ -156,6 +156,14 @@ static int print_phy_handler(struct nl_m
- 			printf("\tRTS threshold: %d\n", rts);
- 	}
- 
-+	if (tb_msg[NL80211_ATTR_WIPHY_COVERAGE_CLASS]) {
-+		unsigned char coverage;
-+
-+		coverage = nla_get_u8(tb_msg[NL80211_ATTR_WIPHY_COVERAGE_CLASS]);
-+		/* See handle_distance() for an explanation where the '450' comes from */
-+		printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
-+	}
-+
- 	if (!tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES])
- 		goto commands;
- 
---- a/phy.c
-+++ b/phy.c
-@@ -164,3 +164,61 @@ static int handle_netns(struct nl80211_s
- COMMAND(set, netns, "<pid>",
- 	NL80211_CMD_SET_WIPHY_NETNS, 0, CIB_PHY, handle_netns,
- 	"Put this wireless device into a different network namespace");
-+
-+static int handle_coverage(struct nl80211_state *state,
-+			struct nl_cb *cb,
-+			struct nl_msg *msg,
-+			int argc, char **argv)
-+{
-+	unsigned int coverage;
-+
-+	if (argc != 1)
-+		return 1;
-+
-+	coverage = strtoul(argv[0], NULL, 10);
-+	if (coverage > 255)
-+		return 1;
-+	
-+	NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS, coverage);
-+
-+	return 0;
-+ nla_put_failure:
-+	return -ENOBUFS;
-+}
-+COMMAND(set, coverage, "<coverage class>",
-+	NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_coverage,
-+	"Set coverage class (1 for every 3 usec of air propagation time).\n"
-+	"Valid values: 0 - 255.");
-+
-+static int handle_distance(struct nl80211_state *state,
-+			struct nl_cb *cb,
-+			struct nl_msg *msg,
-+			int argc, char **argv)
-+{
-+	unsigned int distance, coverage;
-+
-+	if (argc != 1)
-+		return 1;
-+
-+	distance = strtoul(argv[0], NULL, 10);
-+	
-+	/*
-+	 * Divide double the distance by the speed of light in m/usec (300) to
-+	 * get round-trip time in microseconds and then divide the result by
-+	 * three to get coverage class as specified in IEEE 802.11-2007 table
-+	 * 7-27. Values are rounded upwards.
-+	 */
-+	coverage = (distance + 449) / 450;
-+	if (coverage > 255)
-+		return 1;
-+	
-+	NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS, coverage);
-+
-+	return 0;
-+ nla_put_failure:
-+	return -ENOBUFS;
-+}
-+COMMAND(set, distance, "<distance>",
-+	NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_distance,
-+	"Set appropriate coverage class for given link distance in meters.\n"
-+	"Valid values: 0 - 114750");

package/iw/patches/100-survey_freq_in_use.patch

@@ -0,0 +1,14 @@
+--- a/survey.c
++++ b/survey.c
+@@ -44,8 +44,9 @@ static int print_survey_handler(struct n
+ 	}
+ 
+ 	if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
+-		printf("\tfrequency:\t%u MHz\n",
+-			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]));
++		printf("\tfrequency:\t%u MHz%s\n",
++			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
++			sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
+ 	if (sinfo[NL80211_SURVEY_INFO_NOISE])
+ 		printf("\tnoise:\t\t%d dBm\n",
+ 			(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));

package/iw/patches/110-freq.patch

@@ -1,30 +0,0 @@
---- a/interface.c
-+++ b/interface.c
-@@ -260,6 +260,27 @@ static int print_iface_handler(struct nl
- 		printf("%s\tifindex %d\n", indent, nla_get_u32(tb_msg[NL80211_ATTR_IFINDEX]));
- 	if (tb_msg[NL80211_ATTR_IFTYPE])
- 		printf("%s\ttype %s\n", indent, iftype_name(nla_get_u32(tb_msg[NL80211_ATTR_IFTYPE])));
-+	if (tb_msg[NL80211_ATTR_WIPHY_FREQ]) {
-+		const char *mode;
-+
-+		if (tb_msg[NL80211_ATTR_WIPHY_CHANNEL_TYPE])
-+			switch(nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_CHANNEL_TYPE])) {
-+			case NL80211_CHAN_HT20:
-+				mode = "HT20";
-+				break;
-+			case NL80211_CHAN_HT40PLUS:
-+				mode = "HT40+";
-+				break;
-+			case NL80211_CHAN_HT40MINUS:
-+				mode = "HT40-";
-+				break;
-+			default:
-+				mode = "";
-+			}
-+
-+		printf("%s\tfrequency %d MHz %s\n", indent, nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_FREQ]), mode);
-+	}
-+
- 
- 	return NL_SKIP;
- }

package/iw/patches/110-survey_phy_stats.patch

@@ -0,0 +1,32 @@
+--- a/survey.c
++++ b/survey.c
+@@ -44,12 +44,27 @@ static int print_survey_handler(struct n
+ 	}
+ 
+ 	if (sinfo[NL80211_SURVEY_INFO_FREQUENCY])
+-		printf("\tfrequency:\t%u MHz%s\n",
++		printf("\tfrequency:\t\t\t%u MHz%s\n",
+ 			nla_get_u32(sinfo[NL80211_SURVEY_INFO_FREQUENCY]),
+ 			sinfo[NL80211_SURVEY_INFO_IN_USE] ? " [in use]" : "");
+ 	if (sinfo[NL80211_SURVEY_INFO_NOISE])
+-		printf("\tnoise:\t\t%d dBm\n",
++		printf("\tnoise:\t\t\t\t%d dBm\n",
+ 			(int8_t)nla_get_u8(sinfo[NL80211_SURVEY_INFO_NOISE]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME])
++		printf("\tchannel active time:\t\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY])
++		printf("\tchannel busy time:\t\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY])
++		printf("\textension channel busy time:\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX])
++		printf("\tchannel receive time:\t\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_RX]));
++	if (sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX])
++		printf("\tchannel transmit time:\t\t%lld ms\n",
++			(int64_t)nla_get_u64(sinfo[NL80211_SURVEY_INFO_CHANNEL_TIME_TX]));
+ 	return NL_SKIP;
+ }
+ 

package/iw/patches/120-ibss_mcast_rate.patch

@@ -0,0 +1,32 @@
+--- a/ibss.c
++++ b/ibss.c
+@@ -83,6 +83,20 @@ static int join_ibss(struct nl80211_stat
+ 		argc--;
+ 	}
+ 
++	/* multicast rate */
++	if (argc > 1 && strcmp(argv[0], "mcast-rate") == 0) {
++		argv++;
++		argc--;
++
++		rate = strtod(argv[0], &end);
++		if (*end != '\0')
++			return 1;
++
++		NLA_PUT_U32(msg, NL80211_ATTR_MCAST_RATE, (int) rate * 10);
++		argv++;
++		argc--;
++	}
++
+ 	if (!argc)
+ 		return 0;
+ 
+@@ -109,7 +123,7 @@ COMMAND(ibss, leave, NULL,
+ 	"Leave the current IBSS cell.");
+ COMMAND(ibss, join,
+ 	"<SSID> <freq in MHz> [fixed-freq] [<fixed bssid>] "
+-	"[basic-rates <rate in Mbps,rate2,...>] [key d:0:abcde]",
++	"[basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] [key d:0:abcde]",
+ 	NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
+ 	"Join the IBSS cell with the given SSID, if it doesn't exist create\n"
+ 	"it on the given frequency. When fixed frequency is requested, don't\n"

package/kernel/Makefile

@@ -9,6 +9,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=kernel
+PKG_FLAGS:=hold
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/packages
 SCAN_DEPS=modules/*.mk

package/kernel/modules/netdevices.mk

@@ -146,6 +146,22 @@ endef
 $(eval $(call KernelPackage,8139too))
 
 
+define KernelPackage/8139cp
+  SUBMENU:=$(NETWORK_DEVICES_MENU)
+  TITLE:=RealTek RTL-8139C+ PCI Fast Ethernet Adapter kernel support
+  DEPENDS:=@TARGET_x86
+  KCONFIG:=CONFIG_8139CP
+  FILES:=$(LINUX_DIR)/drivers/net/8139cp.$(LINUX_KMOD_SUFFIX)
+  AUTOLOAD:=$(call AutoLoad,50,8139cp)
+endef
+
+define KernelPackage/8139cp/description
+ Kernel module for RealTek RTL-8139C+ PCI Fast Ethernet adapters.
+endef
+
+$(eval $(call KernelPackage,8139cp))
+
+
 define KernelPackage/r8169
   SUBMENU:=$(NETWORK_DEVICES_MENU)
   TITLE:=RealTek RTL-8169 PCI Gigabit Ethernet Adapter kernel support

package/kernel/modules/video.mk

@@ -85,7 +85,7 @@ $(eval $(call KernelPackage,video-konica))
 define KernelPackage/video-ov511
 $(call KernelPackage/video/Depends,@LINUX_2_6 @USB_SUPPORT +kmod-usb-core)
   TITLE:=OV511 USB webcam support
-  KCONFIG:=CONFIG_VIDEO_OV511
+  KCONFIG:=CONFIG_USB_OV511
   FILES:=$(LINUX_DIR)/drivers/media/video/ov511.$(LINUX_KMOD_SUFFIX)
   AUTOLOAD:=$(call AutoLoad,70,ov511)
 endef

package/lua/Makefile

@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 
 PKG_NAME:=lua
 PKG_VERSION:=5.1.4
-PKG_RELEASE:=6
+PKG_RELEASE:=7
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=http://www.lua.org/ftp/ \

package/lua/patches-host/011-lnum-use-double.patch

@@ -0,0 +1,11 @@
+--- a/src/lnum_config.h
++++ b/src/lnum_config.h
+@@ -11,7 +11,7 @@
+ ** Default number modes
+ */
+ #if (!defined LNUM_DOUBLE) && (!defined LNUM_FLOAT) && (!defined LNUM_LDOUBLE)
+-# define LNUM_FLOAT
++# define LNUM_DOUBLE
+ #endif
+ #if (!defined LNUM_INT16) && (!defined LNUM_INT32) && (!defined LNUM_INT64)
+ # define LNUM_INT32

package/lua/patches/011-lnum-use-double.patch

@@ -0,0 +1,11 @@
+--- a/src/lnum_config.h
++++ b/src/lnum_config.h
+@@ -11,7 +11,7 @@
+ ** Default number modes
+ */
+ #if (!defined LNUM_DOUBLE) && (!defined LNUM_FLOAT) && (!defined LNUM_LDOUBLE)
+-# define LNUM_FLOAT
++# define LNUM_DOUBLE
+ #endif
+ #if (!defined LNUM_INT16) && (!defined LNUM_INT32) && (!defined LNUM_INT64)
+ # define LNUM_INT32

package/mac80211/Makefile

@@ -10,23 +10,25 @@ include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=mac80211
 
-PKG_VERSION:=2010-07-29
+PKG_VERSION:=2010-10-19
 PKG_RELEASE:=1
 PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources
 #	http://www.orbit-lab.org/kernel/compat-wireless-2.6/2010/11 \
 #	http://wireless.kernel.org/download/compat-wireless-2.6
-PKG_MD5SUM:=fcfb757939c4718efbf9c87ca59c6932
+PKG_MD5SUM:=3bad1752f0154baa57a4d94774bd2ccf
 
 PKG_SOURCE:=compat-wireless-$(PKG_VERSION).tar.bz2
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION)
+PKG_BUILD_PARALLEL:=1
 
 PKG_CONFIG_DEPENDS:= \
 	CONFIG_PACKAGE_kmod-mac80211 \
 	CONFIG_PACKAGE_MAC80211_DEBUGFS \
-	CONFIG_PACKAGE_ATH9K_USE_MINSTREL \
 	CONFIG_PACKAGE_ATH_DEBUG \
 	CONFIG_ATH_USER_REGD \
 
+CARL9170_FW_VERSION:=1.8.8.2
+
 include $(INCLUDE_DIR)/package.mk
 
 WMENU:=Wireless Drivers
@@ -35,23 +37,23 @@ define KernelPackage/mac80211/Default
   SUBMENU:=$(WMENU)
   URL:=http://linuxwireless.org/
   MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
-  DEPENDS:=@!LINUX_2_4 @(!(TARGET_avr32||TARGET_ep93xx||TARGET_ps3||TARGET_pxcab)||BROKEN)
+  DEPENDS:=@(!(TARGET_avr32||TARGET_ep93xx||TARGET_ps3||TARGET_pxcab)||BROKEN)
 endef
 
 define KernelPackage/cfg80211
   $(call KernelPackage/mac80211/Default)
   TITLE:=cfg80211 - wireless configuration API
-  DEPENDS+= +wireless-tools +iw @!LINUX_2_6_25
+  DEPENDS+= +wireless-tools +iw @!LINUX_2_6_25 @!LINUX_2_4 +crda
 ifeq ($(strip $(call CompareKernelPatchVer,$(KERNEL_PATCHVER),ge,2.6.33)),1)
   FILES:= \
-	$(PKG_BUILD_DIR)/compat/compat.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/compat/compat.ko \
-	$(PKG_BUILD_DIR)/net/wireless/cfg80211.$(LINUX_KMOD_SUFFIX)
+	$(PKG_BUILD_DIR)/net/wireless/cfg80211.ko
   AUTOLOAD:=$(call AutoLoad,20,compat cfg80211)
 else
   FILES:= \
-	$(PKG_BUILD_DIR)/compat/compat.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/compat/compat.ko \
-	$(PKG_BUILD_DIR)/compat/compat_firmware_class.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/compat/compat_firmware_class.ko \
-	$(PKG_BUILD_DIR)/net/wireless/cfg80211.$(LINUX_KMOD_SUFFIX)
+	$(PKG_BUILD_DIR)/net/wireless/cfg80211.ko
   AUTOLOAD:=$(call AutoLoad,20,compat compat_firmware_class cfg80211)
 endif
 endef
@@ -64,7 +66,7 @@ define KernelPackage/mac80211
   $(call KernelPackage/mac80211/Default)
   TITLE:=Linux 802.11 Wireless Networking Stack
   DEPENDS+= +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-cfg80211
-  FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.$(LINUX_KMOD_SUFFIX)
+  FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko
   AUTOLOAD:=$(call AutoLoad,21,mac80211)
   MENU:=1
 endef
@@ -92,6 +94,8 @@ endef
 # Prism54 drivers
 P54PCIFW:=2.13.12.0.arm
 P54USBFW:=2.13.24.0.lm87.arm
+P54SPIFW:=2.13.0.0.a.13.14.arm
+CARL9170_FW:=carl9170-1.fw
 
 define Download/p54usb
   FILE:=$(P54USBFW)
@@ -107,6 +111,20 @@ define Download/p54pci
 endef
 $(eval $(call Download,p54pci))
 
+define Download/p54spi
+  FILE:=$(P54SPIFW)
+  URL:=http://daemonizer.de/prism54/prism54-fw/stlc4560
+  MD5SUM:=42661f8ecbadd88012807493f596081d
+endef
+$(eval $(call Download,p54spi))
+
+define Download/carl9170
+  FILE:=$(CARL9170_FW)
+  URL:=http://www.kernel.org/pub/linux/kernel/people/chr/carl9170/fw/$(CARL9170_FW_VERSION)
+  MD5SUM:=114c43846ed1d2f89cc92bd0e2ec0589
+endef
+$(eval $(call Download,carl9170))
+
 define KernelPackage/p54/Default
   $(call KernelPackage/mac80211/Default)
   TITLE:=Prism54 Drivers
@@ -118,9 +136,9 @@ endef
 
 define KernelPackage/p54-common
   $(call KernelPackage/p54/Default)
-  DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT +kmod-mac80211
+  DEPENDS+= @PCI_SUPPORT||@USB_SUPPORT||@TARGET_omap24xx +kmod-mac80211 +kmod-crc-ccitt
   TITLE+= (COMMON)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54common.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54common.ko
   AUTOLOAD:=$(call AutoLoad,30,p54common)
 endef
 
@@ -128,7 +146,7 @@ define KernelPackage/p54-pci
   $(call KernelPackage/p54/Default)
   TITLE+= (PCI)
   DEPENDS+= @PCI_SUPPORT +kmod-p54-common
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54pci.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54pci.ko
   AUTOLOAD:=$(call AutoLoad,31,p54pci)
 endef
 
@@ -136,10 +154,18 @@ define KernelPackage/p54-usb
   $(call KernelPackage/p54/Default)
   TITLE+= (USB)
   DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-p54-common
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54usb.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54usb.ko
   AUTOLOAD:=$(call AutoLoad,31,p54usb)
 endef
 
+define KernelPackage/p54-spi
+  $(call KernelPackage/p54/Default)
+  TITLE+= (SPI)
+  DEPENDS+= @TARGET_omap24xx +kmod-p54-common
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/p54/p54spi.ko
+  AUTOLOAD:=$(call AutoLoad,31,p54spi)
+endef
+
 # Ralink rt2x00 drivers
 RT61FW:=RT61_Firmware_V1.2.zip
 RT71FW:=RT71W_Firmware_V1.8.zip
@@ -197,7 +223,7 @@ define KernelPackage/rt2x00-lib
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-mac80211 +kmod-crc-itu-t
   TITLE+= (LIB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00lib.ko
   AUTOLOAD:=$(call AutoLoad,25,rt2x00lib)
   MENU:=1
 endef
@@ -226,7 +252,7 @@ define KernelPackage/rt2x00-pci
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @(PCI_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +kmod-eeprom-93cx6
   TITLE+= (PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00pci.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00pci.ko
   AUTOLOAD:=$(call AutoLoad,26,rt2x00pci)
 endef
 
@@ -234,7 +260,7 @@ define KernelPackage/rt2x00-usb
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @USB_SUPPORT +kmod-rt2x00-lib +kmod-usb-core
   TITLE+= (USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00usb.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00usb.ko
   AUTOLOAD:=$(call AutoLoad,26,rt2x00usb)
 endef
 
@@ -242,7 +268,7 @@ define KernelPackage/rt2x00-soc
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @TARGET_ramips +kmod-rt2x00-lib
   TITLE+= (SoC)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00soc.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00soc.ko
   AUTOLOAD:=$(call AutoLoad,26,rt2x00soc)
 endef
 
@@ -250,7 +276,7 @@ define KernelPackage/rt2800-lib
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @(PCI_SUPPORT||USB_SUPPORT||TARGET_ramips) +kmod-rt2x00-lib +USB_SUPPORT:kmod-rt2x00-usb +TARGET_ramips:kmod-rt2x00-soc
   TITLE+= (rt2800 LIB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800lib.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800lib.ko
   AUTOLOAD:=$(call AutoLoad,27,rt2800lib)
 endef
 
@@ -258,7 +284,7 @@ define KernelPackage/rt2400-pci
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
   TITLE+= (RT2400 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2400pci.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2400pci.ko
   AUTOLOAD:=$(call AutoLoad,27,rt2400pci)
 endef
 
@@ -266,7 +292,7 @@ define KernelPackage/rt2500-pci
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
   TITLE+= (RT2500 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500pci.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500pci.ko
   AUTOLOAD:=$(call AutoLoad,27,rt2500pci)
 endef
 
@@ -274,7 +300,7 @@ define KernelPackage/rt2500-usb
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
   TITLE+= (RT2500 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500usb.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2500usb.ko
   AUTOLOAD:=$(call AutoLoad,27,rt2500usb)
 endef
 
@@ -282,7 +308,7 @@ define KernelPackage/rt61-pci
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @PCI_SUPPORT +kmod-rt2x00-pci
   TITLE+= (RT2x61 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt61pci.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt61pci.ko
   AUTOLOAD:=$(call AutoLoad,27,rt61pci)
 endef
 
@@ -290,7 +316,7 @@ define KernelPackage/rt73-usb
   $(call KernelPackage/rt2x00/Default)
   DEPENDS+= @USB_SUPPORT +kmod-rt2x00-usb
   TITLE+= (RT73 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt73usb.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt73usb.ko
   AUTOLOAD:=$(call AutoLoad,27,rt73usb)
 endef
 
@@ -298,7 +324,7 @@ define KernelPackage/rt2800-pci
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= +kmod-rt2x00-pci +kmod-rt2800-lib +kmod-crc-ccitt +TARGET_ramips:kmod-rt2x00-soc
   TITLE+= (RT2860 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800pci.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800pci.ko
   AUTOLOAD:=$(call AutoLoad,28,rt2800pci)
 endef
 
@@ -306,7 +332,7 @@ define KernelPackage/rt2800-usb
 $(call KernelPackage/rt2x00/Default)
   DEPENDS+= +kmod-rt2x00-usb +kmod-rt2800-lib +kmod-crc-ccitt
   TITLE+= (RT2870 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800usb.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2800usb.ko
   AUTOLOAD:=$(call AutoLoad,28,rt2800usb)
 endef
 
@@ -321,7 +347,7 @@ define KernelPackage/rtl8180
   $(call KernelPackage/rtl818x/Default)
   DEPENDS+= @PCI_SUPPORT
   TITLE+= (RTL8180 PCI)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8180.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8180.ko
   AUTOLOAD:=$(call AutoLoad,27,rtl8180)
 endef
 
@@ -329,7 +355,7 @@ define KernelPackage/rtl8187
 $(call KernelPackage/rtl818x/Default)
   DEPENDS+= @USB_SUPPORT
   TITLE+= (RTL8187 USB)
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8187.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/rtl818x/rtl8187.ko
   AUTOLOAD:=$(call AutoLoad,27,rtl8187)
 endef
 
@@ -346,7 +372,7 @@ define KernelPackage/zd1211rw
   $(call KernelPackage/mac80211/Default)
   TITLE:=Zydas ZD1211 support
   DEPENDS+= @USB_SUPPORT +kmod-usb-core +kmod-mac80211
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/zd1211rw/zd1211rw.ko
   AUTOLOAD:=$(call AutoLoad,60,zd1211rw)
 endef
 
@@ -378,7 +404,7 @@ define KernelPackage/ath
   $(call KernelPackage/mac80211/Default)
   TITLE:=Atheros common driver part
   DEPENDS+= @PCI_SUPPORT +kmod-mac80211
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath.ko
   AUTOLOAD:=$(call AutoLoad,26,ath)
   MENU:=1
 endef
@@ -392,7 +418,7 @@ define KernelPackage/ath5k
   TITLE:=Atheros 5xxx wireless cards support
   URL:=http://linuxwireless.org/en/users/Drivers/ath5k
   DEPENDS+= +kmod-ath
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath5k/ath5k.ko
   AUTOLOAD:=$(call AutoLoad,27,ath5k)
 endef
 
@@ -407,9 +433,9 @@ define KernelPackage/ath9k
   URL:=http://linuxwireless.org/en/users/Drivers/ath9k
   DEPENDS+= +kmod-ath
   FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_common.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k_hw.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.$(LINUX_KMOD_SUFFIX)
+	$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ath9k/ath9k.ko
   AUTOLOAD:=$(call AutoLoad,27,ath9k_hw ath9k_common ath9k)
   MENU:=1
 endef
@@ -419,17 +445,20 @@ This module adds support for wireless adapters based on
 Atheros IEEE 802.11n AR5008 and AR9001 family of chipsets.
 endef
 
-define KernelPackage/ath9k/config
+define KernelPackage/carl9170
-	menu "Configuration"
+  $(call KernelPackage/mac80211/Default)
-		depends PACKAGE_kmod-ath9k
+  TITLE:=Driver for Atheros AR9170 USB sticks
-
+  DEPENDS:=@USB_SUPPORT +kmod-mac80211 +kmod-ath +kmod-usb-core
-	config PACKAGE_ATH9K_USE_MINSTREL
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/carl9170/carl9170.ko
-		bool "use the new minstrel_ht rate control for ath9k"
+  AUTOLOAD:=$(call AutoLoad,60,carl9170)
-		default y
-
-	endmenu
 endef
 
+define KernelPackage/carl9170/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(DL_DIR)/$(CARL9170_FW) $(1)/lib/firmware/
+endef
+
+
 USB8388FW_NAME:=usb8388
 USB8388FW_VERSION:=5.110.22.p23
 
@@ -464,8 +493,8 @@ define KernelPackage/libertas-usb
   DEPENDS+= @USB_SUPPORT +kmod-mac80211 +kmod-usb-core +kmod-lib80211
   TITLE:=Marvell 88W8015 Wireless Driver
   FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/usb8xxx.$(LINUX_KMOD_SUFFIX)
+	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/usb8xxx.ko
   AUTOLOAD:=$(call AutoLoad,27,libertas usb8xxx)
 endef
 
@@ -474,29 +503,16 @@ define KernelPackage/libertas-sd
   DEPENDS+= +kmod-mac80211 +kmod-lib80211
   TITLE:=Marvell 88W8686 Wireless Driver
   FILES:= \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas.ko \
-	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas_sdio.$(LINUX_KMOD_SUFFIX)
+	$(PKG_BUILD_DIR)/drivers/net/wireless/libertas/libertas_sdio.ko
   AUTOLOAD:=$(call AutoLoad,27,libertas libertas_sdio)
 endef
 
-define KernelPackage/ar9170
-  $(call KernelPackage/mac80211/Default)
-  TITLE:=Atheros AR9170 802.11n USB support
-  URL:=http://wireless.kernel.org/en/users/Drivers/ar9170
-  DEPENDS+= @USB_SUPPORT @!LINUX_2_6_25 +kmod-ath +kmod-usb-core
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ath/ar9170/ar9170usb.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,27,ar9170usb)
-endef
-
-define KernelPackage/ar9170/description
- This is a driver for the Atheros "otus" 802.11n USB devices.
-endef
-
 define KernelPackage/mac80211-hwsim
   $(call KernelPackage/mac80211/Default)
   TITLE:=mac80211 HW simulation device
   DEPENDS+= +kmod-mac80211
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mac80211_hwsim.ko
   AUTOLOAD:=$(call AutoLoad,60,mac80211_hwsim)
 endef
 
@@ -504,7 +520,7 @@ define KernelPackage/net-libipw
   $(call KernelPackage/mac80211/Default)
   TITLE:=libipw for ipw2100 and ipw2200
   DEPENDS:=@PCI_SUPPORT +kmod-crypto-core +kmod-crypto-arc4 +kmod-crypto-aes +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/libipw.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/libipw.ko
   AUTOLOAD:=$(call AutoLoad,49,libipw)
 endef
 
@@ -526,7 +542,7 @@ define KernelPackage/net-ipw2100
   $(call KernelPackage/mac80211/Default)
   TITLE:=Intel IPW2100 driver
   DEPENDS:=@PCI_SUPPORT +kmod-net-libipw
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2100.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2100.ko
   AUTOLOAD:=$(call AutoLoad,50,ipw2100)
 endef
 
@@ -550,7 +566,7 @@ define KernelPackage/net-ipw2200
   $(call KernelPackage/mac80211/Default)
   TITLE:=Intel IPW2200 driver
   DEPENDS:=@PCI_SUPPORT +kmod-net-libipw
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2200.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/ipw2x00/ipw2200.ko
   AUTOLOAD:=$(call AutoLoad,50,ipw2200)
 endef
 
@@ -566,7 +582,7 @@ define KernelPackage/mwl8k
   TITLE:=Driver for Marvell TOPDOG 802.11 Wireless cards
   URL:=http://wireless.kernel.org/en/users/Drivers/mwl8k
   DEPENDS+= @PCI_SUPPORT +kmod-mac80211
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/mwl8k.ko
   AUTOLOAD:=$(call AutoLoad,27,mwl8k)
 endef
 
@@ -661,7 +677,7 @@ endef
 define KernelPackage/b43
 $(call KernelPackage/b43-common)
   TITLE:=Broadcom 43xx wireless support
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43/b43.ko
   AUTOLOAD:=$(call AutoLoad,30,b43)
   MENU:=1
 endef
@@ -759,7 +775,7 @@ endef
 define KernelPackage/b43legacy
 $(call KernelPackage/b43-common)
   TITLE:=Broadcom 43xx-legacy wireless support
-  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.$(LINUX_KMOD_SUFFIX)
+  FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/b43legacy/b43legacy.ko
   AUTOLOAD:=$(call AutoLoad,30,b43legacy)
   MENU:=1
 endef
@@ -804,12 +820,11 @@ BUILDFLAGS:= \
 	$(if $(CONFIG_PCI),-DCONFIG_B43_PCI_AUTOSELECT -DCONFIG_B43_PCICORE_AUTOSELECT) \
 	$(if $(CONFIG_LEDS_TRIGGERS), -DCONFIG_MAC80211_LEDS -DCONFIG_LEDS_TRIGGERS -DCONFIG_B43_LEDS -DCONFIG_B43LEGACY_LEDS -DCONFIG_AR9170_LEDS) \
 	-DCONFIG_B43_HWRNG -DCONFIG_B43LEGACY_HWRNG \
-	$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),-DCONFIG_MAC80211_DEBUGFS -DCONFIG_ATH9K_DEBUGFS) \
+	$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),-DCONFIG_MAC80211_DEBUGFS -DCONFIG_ATH9K_DEBUGFS -DCONFIG_CARL9170_DEBUGFS) \
 	$(if $(CONFIG_PACKAGE_ATH_DEBUG),-DCONFIG_ATH_DEBUG -DCONFIG_ATH9K_PKTLOG) \
 	-D__CONFIG_MAC80211_RC_DEFAULT=minstrel \
 	-DCONFIG_MAC80211_RC_MINSTREL_HT \
 	$(if $(CONFIG_ATH_USER_REGD),-DATH_USER_REGD=1) \
-	$(if $(CONFIG_PACKAGE_ATH9K_USE_MINSTREL),-DATH9K_USE_MINSTREL) \
 	$(if $(CONFIG_PACKAGE_RT2X00_LIB_DEBUGFS),-DCONFIG_RT2X00_LIB_DEBUGFS) \
 	$(if $(CONFIG_PACKAGE_RT2X00_DEBUG),-DCONFIG_RT2X00_DEBUG) \
 	$(if $(NEED_RT2X00_LIB_HT),-DCONFIG_RT2X00_LIB_HT) \
@@ -821,6 +836,7 @@ BUILDFLAGS:= \
 	$(if $(CONFIG_PACKAGE_kmod-rt2x00-soc),-DCONFIG_RT2X00_LIB_SOC) \
 	$(if $(CONFIG_PCI_SUPPORT),-DCONFIG_RT2800PCI_PCI) \
 	$(if $(CONFIG_TARGET_ramips),-DCONFIG_RT2800PCI_SOC) \
+	-DCONFIG_P54_SPI_DEFAULT_EEPROM
 
 MAKE_OPTS:= \
 	CROSS_COMPILE="$(KERNEL_CROSS)" \
@@ -845,12 +861,17 @@ MAKE_OPTS:= \
 	CONFIG_ATH9K_PKTLOG=$(if $(CONFIG_PACKAGE_ATH_DEBUG),y) \
 	CONFIG_ATH5K=$(if $(CONFIG_PACKAGE_kmod-ath5k),m) \
 	CONFIG_ATH9K=$(if $(CONFIG_PACKAGE_kmod-ath9k),m) \
+	CONFIG_ATH9K_HW=$(if $(CONFIG_PACKAGE_kmod-ath9k),m) \
+	CONFIG_ATH9K_COMMON=$(if $(CONFIG_PACKAGE_kmod-ath9k),m) \
 	CONFIG_ATH9K_DEBUGFS=$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),y) \
+	CONFIG_CARL9170=$(if $(CONFIG_PACKAGE_kmod-carl9170),m) \
+	CONFIG_CARL9170_DEBUGFS=$(if $(CONFIG_PACKAGE_MAC80211_DEBUGFS),y) \
 	CONFIG_ZD1211RW=$(if $(CONFIG_PACKAGE_kmod-zd1211rw),m) \
 	CONFIG_P54_COMMON=$(if $(CONFIG_PACKAGE_kmod-p54-common),m) \
 	CONFIG_P54_PCI=$(if $(CONFIG_PACKAGE_kmod-p54-pci),m) \
 	CONFIG_P54_USB=$(if $(CONFIG_PACKAGE_kmod-p54-usb),m) \
-	CONFIG_P54_SPI= \
+	CONFIG_P54_SPI=$(if $(CONFIG_PACKAGE_kmod-p54-spi),m) \
+	CONFIG_P54_SPI_DEFAULT_EEPROM=y \
 	CONFIG_RT2X00=$(if $(CONFIG_PACKAGE_kmod-rt2x00-lib),m) \
 	CONFIG_RT2X00_LIB=$(if $(CONFIG_PACKAGE_kmod-rt2x00-lib),m) \
 	CONFIG_RT2X00_LIB_PCI=$(if $(CONFIG_PACKAGE_kmod-rt2x00-pci),m) \
@@ -890,6 +911,7 @@ MAKE_OPTS:= \
 	CONFIG_LIB80211_CRYPT_CCMP= \
 	CONFIG_LIB80211_CRYPT_TKIP= \
 	CONFIG_IWLWIFI= \
+	CONFIG_COMPAT_IWLWIFI= \
 	CONFIG_IWLAGN= \
 	CONFIG_MWL8K=$(if $(CONFIG_PACKAGE_kmod-mwl8k),m) \
 	CONFIG_ATMEL= \
@@ -935,7 +957,7 @@ endef
 ifneq ($(CONFIG_PACKAGE_kmod-cfg80211),)
  define Build/Compile/kmod
 	rm -rf $(PKG_BUILD_DIR)/modules
-	$(MAKE) -C "$(PKG_BUILD_DIR)" $(MAKE_OPTS) all
+	$(MAKE) $(PKG_JOBS) -C "$(PKG_BUILD_DIR)" $(MAKE_OPTS) all
  endef
 endif
 
@@ -980,6 +1002,11 @@ define KernelPackage/p54-usb/install
 	$(INSTALL_DATA) $(DL_DIR)/$(P54USBFW) $(1)/lib/firmware/isl3887usb
 endef
 
+define KernelPackage/p54-spi/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(DL_DIR)/$(P54SPIFW) $(1)/lib/firmware/3826.arm
+endef
+
 define KernelPackage/rt61-pci/install
 	$(INSTALL_DIR) $(1)/lib/firmware
 	$(INSTALL_DATA) $(PKG_BUILD_DIR)/rt2?61*.bin $(1)/lib/firmware/
@@ -1076,6 +1103,7 @@ $(eval $(call KernelPackage,mac80211))
 $(eval $(call KernelPackage,p54-common))
 $(eval $(call KernelPackage,p54-pci))
 $(eval $(call KernelPackage,p54-usb))
+$(eval $(call KernelPackage,p54-spi))
 $(eval $(call KernelPackage,rt2x00-lib))
 $(eval $(call KernelPackage,rt2x00-pci))
 $(eval $(call KernelPackage,rt2x00-usb))
@@ -1094,7 +1122,7 @@ $(eval $(call KernelPackage,zd1211rw))
 $(eval $(call KernelPackage,mac80211-hwsim))
 $(eval $(call KernelPackage,ath9k))
 $(eval $(call KernelPackage,ath))
-$(eval $(call KernelPackage,ar9170))
+$(eval $(call KernelPackage,carl9170))
 $(eval $(call KernelPackage,b43))
 $(eval $(call KernelPackage,b43legacy))
 $(eval $(call KernelPackage,net-libipw))

package/mac80211/files/lib/wifi/mac80211.sh

@@ -165,6 +165,14 @@ scan_mac80211() {
 	config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${monitor:+$monitor }${mesh:+$mesh}"
 }
 
+list_phy_interfaces() {
+	local phy="$1"
+	if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
+		ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
+	else
+		ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
+	fi
+}
 
 disable_mac80211() (
 	local device="$1"
@@ -181,7 +189,7 @@ disable_mac80211() (
 	done
 
 	include /lib/network
-	for wdev in $(ls /sys/class/ieee80211/${phy}/device/net 2>/dev/null); do
+	for wdev in $(list_phy_interfaces "$phy"); do
 		[ -f "/var/run/$wdev.pid" ] && kill $(cat /var/run/$wdev.pid) >&/dev/null 2>&1
 		for pid in `pidof wpa_supplicant`; do
 			grep "$wdev" /proc/$pid/cmdline >/dev/null && \
@@ -214,6 +222,7 @@ enable_mac80211() {
 	local macidx=0
 	local apidx=0
 	fixed=""
+	local hostapd_ctrl=""
 
 	[ -n "$country" ] && iw reg set "$country"
 	[ "$channel" = "auto" -o "$channel" = "0" ] || {
@@ -336,6 +345,7 @@ enable_mac80211() {
 			config_get mode "$vif" mode
 			config_get ifname "$vif" ifname
 			[ "$mode" = "ap" ] || continue
+			hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd-$phy/$ifname}"
 			mac80211_start_vif "$vif" "$ifname"
 		done
 	}
@@ -352,11 +362,18 @@ enable_mac80211() {
 				adhoc)
 					config_get bssid "$vif" bssid
 					config_get ssid "$vif" ssid
-					iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid
+					config_get mcast_rate "$vif" mcast_rate
+					local mcval=""
+					[ -n "$mcast_rate" ] && {
+						mcval="$(($mcast_rate / 1000))"
+						mcsub="$(( ($mcast_rate / 100) % 10 ))"
+						[ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
+					}
+					iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid ${mcval:+mcast-rate $mcval}
 				;;
 				sta)
 					if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
-						wpa_supplicant_setup_vif "$vif" wext || {
+						wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" || {
 							echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
 							# make sure this wifi interface won't accidentally stay open without encryption
 							ifconfig "$ifname" down
@@ -396,7 +413,7 @@ detect_mac80211() {
 
 		mode_11n=""
 		mode_band="g"
-		channel="5"
+		channel="11"
 		ht_cap=0
 		for cap in $(iw phy "$dev" info | grep 'Capabilities:' | cut -d: -f2); do
 			ht_cap="$(($ht_cap | $cap))"
@@ -408,6 +425,7 @@ detect_mac80211() {
 
 			list="	list ht_capab"
 			[ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list	LDPC" "$N"
+			[ "$(($ht_cap & 16))" -eq 16 ] && append ht_capab "$list	GF" "$N"
 			[ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list	SHORT-GI-20" "$N"
 			[ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list	SHORT-GI-40" "$N"
 			[ "$(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list	TX-STBC" "$N"

package/mac80211/patches/001-disable_b44.patch

@@ -1,6 +1,6 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -268,8 +268,8 @@ endif
+@@ -300,8 +300,8 @@ endif #CONFIG_SSB
  
  CONFIG_P54_PCI=m
  

package/mac80211/patches/002-disable_rfkill.patch

@@ -1,6 +1,6 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -72,7 +72,7 @@ endif # build check
+@@ -74,7 +74,7 @@ endif # build check
  endif # kernel Makefile check
  
  # These both are needed by compat-wireless || compat-bluetooth so enable them
@@ -9,7 +9,7 @@
  
  ifeq ($(CONFIG_MAC80211),y)
  $(error "ERROR: you have MAC80211 compiled into the kernel, CONFIG_MAC80211=y, as such you cannot replace its mac80211 driver. You need this set to CONFIG_MAC80211=m. If you are using Fedora upgrade your kernel as later version should this set as modular. For further information on Fedora see https://bugzilla.redhat.com/show_bug.cgi?id=470143. If you are using your own kernel recompile it and make mac80211 modular")
-@@ -495,8 +495,8 @@ endif
+@@ -585,8 +585,8 @@ endif #CONFIG_COMPAT_KERNEL_27
  # We need the backported rfkill module on kernel < 2.6.31.
  # In more recent kernel versions use the in kernel rfkill module.
  ifdef CONFIG_COMPAT_KERNEL_31
@@ -19,5 +19,5 @@
 +# CONFIG_RFKILL_BACKPORT=m
 +# CONFIG_RFKILL_BACKPORT_LEDS=y
 +# CONFIG_RFKILL_BACKPORT_INPUT=y
- endif
+ endif #CONFIG_COMPAT_KERNEL_31
  

package/mac80211/patches/003-disable_bt.patch

@@ -1,6 +1,6 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -94,8 +94,8 @@ ifndef CONFIG_COMPAT_KERNEL_27
+@@ -96,8 +96,8 @@ ifndef CONFIG_COMPAT_KERNEL_27
  ifeq ($(CONFIG_BT),y)
  # we'll ignore compiling bluetooth
  else
@@ -9,5 +9,5 @@
 +# CONFIG_COMPAT_BLUETOOTH=y
 +# CONFIG_COMPAT_BLUETOOTH_MODULES=m
  endif
- endif # Kernel >= 2.6.26
+ endif #CONFIG_COMPAT_KERNEL_27
  

package/mac80211/patches/005-disable_ssb_build.patch

@@ -6,9 +6,9 @@
  obj-$(CONFIG_COMPAT_NETWORK_MODULES) += drivers/net/
 -obj-$(CONFIG_COMPAT_VAR_MODULES) +=  drivers/ssb/ drivers/misc/eeprom/
 +obj-$(CONFIG_COMPAT_VAR_MODULES) +=  drivers/misc/eeprom/
- endif
  
- obj-$(CONFIG_COMPAT_BLUETOOTH) += net/bluetooth/
+ ifeq ($(CONFIG_STAGING_EXCLUDE_BUILD),)
+ obj-$(CONFIG_COMPAT_STAGING) += drivers/staging/ath6kl/
 --- a/config.mk
 +++ b/config.mk
 @@ -9,7 +9,6 @@ ifeq ($(wildcard $(KLIB_BUILD)/.config),
@@ -19,11 +19,11 @@
  else
  include $(KLIB_BUILD)/.config
  endif
-@@ -251,21 +250,6 @@ CONFIG_IPW2200_QOS=y
+@@ -283,21 +282,6 @@ CONFIG_IPW2200_QOS=y
- #
  # % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface
+ endif #CONFIG_WIRELESS_EXT
  
--ifneq ($(CONFIG_SSB),)
+-ifdef CONFIG_SSB
 -# Sonics Silicon Backplane
 -CONFIG_SSB_SPROM=y
 -# CONFIG_SSB_DEBUG=y
@@ -31,21 +31,21 @@
 -CONFIG_SSB_BLOCKIO=y
 -CONFIG_SSB_PCIHOST=y
 -CONFIG_SSB_B43_PCI_BRIDGE=y
--ifneq ($(CONFIG_PCMCIA),)
+-ifdef CONFIG_PCMCIA
 -CONFIG_SSB_PCMCIAHOST=y
--endif
+-endif #CONFIG_PCMCIA
 -# CONFIG_SSB_DEBUG=y
 -CONFIG_SSB_DRIVER_PCICORE=y
--endif
+-endif #CONFIG_SSB
 -
  CONFIG_P54_PCI=m
  
  # CONFIG_B44=m
-@@ -429,7 +413,6 @@ endif # end of SPI driver list
+@@ -485,7 +469,6 @@ endif #CONFIG_SPI_MASTER end of SPI driv
  
- ifneq ($(CONFIG_MMC),)
+ ifdef CONFIG_MMC
  
 -CONFIG_SSB_SDIOHOST=y
  CONFIG_B43_SDIO=y
- CONFIG_WL1251_SDIO=m
  
+ ifdef CONFIG_CRC7

package/mac80211/patches/007-remove_misc_drivers.patch

@@ -1,6 +1,15 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -282,13 +282,13 @@ endif
+@@ -196,7 +196,7 @@ $(warning "WARNING: CONFIG_CFG80211_WEXT
+ endif #CONFIG_WIRELESS_EXT
+ 
+ ifneq ($(CONFIG_STAGING),)
+- CONFIG_COMPAT_STAGING=m
++# CONFIG_COMPAT_STAGING=m
+ endif
+ 
+ # mac80211 test driver
+@@ -314,13 +314,13 @@ endif #CONFIG_CRC_ITU_T
  CONFIG_MWL8K=m
  
  # Ethernet drivers go here
@@ -13,24 +22,35 @@
  ifdef CONFIG_COMPAT_KERNEL_27
 -CONFIG_ATL1C=n
 +# CONFIG_ATL1C=n
- else
+ else #CONFIG_COMPAT_KERNEL_27
 -CONFIG_ATL1C=m
 +# CONFIG_ATL1C=m
- endif
+ endif #CONFIG_COMPAT_KERNEL_27
  
- CONFIG_HERMES=m
+ ifdef CONFIG_WIRELESS_EXT
-@@ -342,10 +342,10 @@ CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
+@@ -371,17 +371,17 @@ CONFIG_ZD1211RW=m
- CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
+ # Note: this depends on CONFIG_USB_NET_RNDIS_HOST and CONFIG_USB_NET_CDCETHER
- CONFIG_USB_NET_COMPAT_CDCETHER=n
+ # it also requires new RNDIS_HOST and CDC_ETHER modules which we add
- else
+ ifdef CONFIG_COMPAT_KERNEL_29
+-CONFIG_USB_COMPAT_USBNET=n
+-CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
+-CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
+-CONFIG_USB_NET_COMPAT_CDCETHER=n
++# CONFIG_USB_COMPAT_USBNET=n
++# CONFIG_USB_NET_COMPAT_RNDIS_HOST=n
++# CONFIG_USB_NET_COMPAT_RNDIS_WLAN=n
++# CONFIG_USB_NET_COMPAT_CDCETHER=n
+ else #CONFIG_COMPAT_KERNEL_29
 -CONFIG_USB_COMPAT_USBNET=m
++# CONFIG_USB_COMPAT_USBNET=m
+ ifdef CONFIG_USB_NET_CDCETHER
 -CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
 -CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
--CONFIG_USB_NET_COMPAT_CDCETHER=m
-+# CONFIG_USB_COMPAT_USBNET=m
 +# CONFIG_USB_NET_COMPAT_RNDIS_HOST=m
 +# CONFIG_USB_NET_COMPAT_RNDIS_WLAN=m
+ endif #CONFIG_USB_NET_CDCETHER
+-CONFIG_USB_NET_COMPAT_CDCETHER=m
 +# CONFIG_USB_NET_COMPAT_CDCETHER=m
- endif
+ endif #CONFIG_COMPAT_KERNEL_29
  
  

package/mac80211/patches/008-led_default.patch

@@ -0,0 +1,127 @@
+--- a/config.mk
++++ b/config.mk
+@@ -132,7 +132,7 @@ CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstr
+ CONFIG_MAC80211_RC_PID=y
+ CONFIG_MAC80211_RC_MINSTREL=y
+ CONFIG_MAC80211_RC_MINSTREL_HT=y
+-CONFIG_MAC80211_LEDS=y
++# CONFIG_MAC80211_LEDS=y
+ 
+ # enable mesh networking too
+ CONFIG_MAC80211_MESH=y
+@@ -240,7 +240,7 @@ CONFIG_B43_PCI_AUTOSELECT=y
+ ifdef CONFIG_PCMCIA
+ CONFIG_B43_PCMCIA=y
+ endif #CONFIG_PCMCIA
+-CONFIG_B43_LEDS=y
++# CONFIG_B43_LEDS=y
+ CONFIG_B43_PHY_LP=y
+ CONFIG_B43_NPHY=y
+ # CONFIG_B43_FORCE_PIO=y
+@@ -249,7 +249,7 @@ CONFIG_B43_NPHY=y
+ CONFIG_B43LEGACY=m
+ CONFIG_B43LEGACY_HWRNG=y
+ CONFIG_B43LEGACY_PCI_AUTOSELECT=y
+-CONFIG_B43LEGACY_LEDS=y
++# CONFIG_B43LEGACY_LEDS=y
+ # CONFIG_B43LEGACY_DEBUG=y
+ CONFIG_B43LEGACY_DMA=y
+ CONFIG_B43LEGACY_PIO=y
+@@ -542,7 +542,7 @@ endif
+ 
+ # p54
+ CONFIG_P54_COMMON=m
+-CONFIG_P54_LEDS=y
++# CONFIG_P54_LEDS=y
+ 
+ # Atheros
+ CONFIG_ATH_COMMON=m
+--- a/drivers/net/wireless/ath/ath9k/gpio.c
++++ b/drivers/net/wireless/ath/ath9k/gpio.c
+@@ -54,6 +54,7 @@ static void ath_led_blink_work(struct wo
+ 		sc->sc_flags |= SC_OP_LED_ON;
+ }
+ 
++#ifdef CONFIG_LEDS_CLASS
+ static void ath_led_brightness(struct led_classdev *led_cdev,
+ 			       enum led_brightness brightness)
+ {
+@@ -90,10 +91,12 @@ static void ath_led_brightness(struct le
+ 		break;
+ 	}
+ }
++#endif
+ 
+ static int ath_register_led(struct ath_softc *sc, struct ath_led *led,
+ 			    char *trigger)
+ {
++#ifdef CONFIG_LEDS_CLASS
+ 	int ret;
+ 
+ 	led->sc = sc;
+@@ -108,14 +111,19 @@ static int ath_register_led(struct ath_s
+ 	else
+ 		led->registered = 1;
+ 	return ret;
++#else
++	return 0;
++#endif
+ }
+ 
+ static void ath_unregister_led(struct ath_led *led)
+ {
++#ifdef CONFIG_LEDS_CLASS
+ 	if (led->registered) {
+ 		led_classdev_unregister(&led->led_cdev);
+ 		led->registered = 0;
+ 	}
++#endif
+ }
+ 
+ void ath_deinit_leds(struct ath_softc *sc)
+--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
++++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+@@ -860,6 +860,7 @@ static void ath9k_led_brightness_work(st
+ 	}
+ }
+ 
++#ifdef CONFIG_LEDS_CLASS
+ static void ath9k_led_brightness(struct led_classdev *led_cdev,
+ 				 enum led_brightness brightness)
+ {
+@@ -871,6 +872,7 @@ static void ath9k_led_brightness(struct 
+ 		ieee80211_queue_delayed_work(priv->hw,
+ 					     &led->brightness_work, 0);
+ }
++#endif
+ 
+ static void ath9k_led_stop_brightness(struct ath9k_htc_priv *priv)
+ {
+@@ -883,6 +885,7 @@ static void ath9k_led_stop_brightness(st
+ static int ath9k_register_led(struct ath9k_htc_priv *priv, struct ath_led *led,
+ 			      char *trigger)
+ {
++#ifdef CONFIG_LEDS_CLASS
+ 	int ret;
+ 
+ 	led->priv = priv;
+@@ -900,14 +903,19 @@ static int ath9k_register_led(struct ath
+ 	INIT_DELAYED_WORK(&led->brightness_work, ath9k_led_brightness_work);
+ 
+ 	return ret;
++#else
++	return 0;
++#endif
+ }
+ 
+ static void ath9k_unregister_led(struct ath_led *led)
+ {
++#ifdef CONFIG_LEDS_CLASS
+ 	if (led->registered) {
+ 		led_classdev_unregister(&led->led_cdev);
+ 		led->registered = 0;
+ 	}
++#endif
+ }
+ 
+ void ath9k_deinit_leds(struct ath9k_htc_priv *priv)

package/mac80211/patches/009-remove_mac80211_module_dependence.patch

@@ -1,6 +1,6 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -42,21 +42,6 @@ $(error "ERROR: Your 2.6.27 kernel has C
+@@ -42,23 +42,6 @@ $(error "ERROR: Your 2.6.27 kernel has C
  endif
  endif
  
@@ -13,9 +13,11 @@
 -#
 -# skb->requeue
 -#
--ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 27 && echo yes),yes)
+-# In kernel 2.6.32 both attributes were removed.
+-#
+-ifeq ($(shell test $(KERNEL_SUBLEVEL) -ge 27 -a $(KERNEL_SUBLEVEL) -le 31 && echo yes),yes)
 -ifeq ($(CONFIG_MAC80211),)
--$(error "ERROR: Your >=2.6.27 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.")
+-$(error "ERROR: Your >=2.6.27 and <= 2.6.31 kernel has CONFIG_MAC80211 disabled, you should have it CONFIG_MAC80211=m if you want to use this thing.")
 -endif
 -endif
 -

package/mac80211/patches/010-no_pcmcia.patch

@@ -9,12 +9,12 @@
  else
  include $(KLIB_BUILD)/.config
  endif
-@@ -192,7 +192,7 @@ CONFIG_B43=m
+@@ -221,7 +221,7 @@ CONFIG_B43=m
  CONFIG_B43_HWRNG=y
  CONFIG_B43_PCI_AUTOSELECT=y
- ifneq ($(CONFIG_PCMCIA),)
+ ifdef CONFIG_PCMCIA
 -CONFIG_B43_PCMCIA=y
 +# CONFIG_B43_PCMCIA=y
- endif
+ endif #CONFIG_PCMCIA
- CONFIG_B43_LEDS=y
+ # CONFIG_B43_LEDS=y
  CONFIG_B43_PHY_LP=y

package/mac80211/patches/011-no_sdio.patch

@@ -1,11 +1,11 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -398,7 +398,7 @@ endif # end of SPI driver list
+@@ -452,7 +452,7 @@ endif #CONFIG_SPI_MASTER end of SPI driv
  
- ifneq ($(CONFIG_MMC),)
+ ifdef CONFIG_MMC
  
 -CONFIG_B43_SDIO=y
 +# CONFIG_B43_SDIO=y
- CONFIG_WL1251_SDIO=m
  
- ifndef CONFIG_COMPAT_KERNEL_32
+ ifdef CONFIG_CRC7
+ CONFIG_WL1251_SDIO=m

package/mac80211/patches/013-disable_b43_nphy.patch

@@ -1,8 +1,8 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -196,7 +196,7 @@ ifneq ($(CONFIG_PCMCIA),)
+@@ -225,7 +225,7 @@ ifdef CONFIG_PCMCIA
- endif
+ endif #CONFIG_PCMCIA
- CONFIG_B43_LEDS=y
+ # CONFIG_B43_LEDS=y
  CONFIG_B43_PHY_LP=y
 -CONFIG_B43_NPHY=y
 +# CONFIG_B43_NPHY is not set

package/mac80211/patches/015-remove-rt2x00-options.patch

@@ -1,6 +1,6 @@
 --- a/config.mk
 +++ b/config.mk
-@@ -244,12 +244,12 @@ CONFIG_RTL8180=m
+@@ -274,12 +274,12 @@ CONFIG_RTL8180=m
  
  CONFIG_ADM8211=m
  
@@ -8,19 +8,19 @@
 +# CONFIG_RT2X00_LIB_PCI=m
  CONFIG_RT2400PCI=m
  CONFIG_RT2500PCI=m
- ifneq ($(CONFIG_CRC_CCITT),)
+ ifdef CONFIG_CRC_CCITT
  CONFIG_RT2800PCI=m
 -CONFIG_RT2800PCI_PCI=y
 +# CONFIG_RT2800PCI_PCI=y
  # CONFIG_RT2800PCI_RT30XX=y
  # CONFIG_RT2800PCI_RT35XX=y
  # CONFIG_RT2800PCI_SOC=y
-@@ -355,7 +355,7 @@ CONFIG_RT2800USB_RT30XX=y
+@@ -402,7 +402,7 @@ CONFIG_RT2800USB_RT30XX=y
  CONFIG_RT2800USB_RT35XX=y
  CONFIG_RT2800USB_UNKNOWN=y
- endif
+ endif #CONFIG_CRC_CCITT
 -CONFIG_RT2X00_LIB_USB=m
 +# CONFIG_RT2X00_LIB_USB=m
  NEED_RT2X00=y
  # RT73USB requires firmware
- ifneq ($(CONFIG_CRC_ITU_T),)
+ ifdef CONFIG_CRC_ITU_T

package/mac80211/patches/016-remove_pid_algo.patch

@@ -3,9 +3,9 @@
 @@ -112,7 +112,7 @@ CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
  # This is the one used by our compat-wireless net/mac80211/rate.c
  # in case you have and old kernel which is overriding this to pid.
- CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel
+ CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstrel_ht
 -CONFIG_MAC80211_RC_PID=y
 +# CONFIG_MAC80211_RC_PID=y
  CONFIG_MAC80211_RC_MINSTREL=y
  CONFIG_MAC80211_RC_MINSTREL_HT=y
- CONFIG_MAC80211_LEDS=y
+ # CONFIG_MAC80211_LEDS=y