mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2025-04-21 12:27:27 +03:00
(6/6) bcm57xx: package
This is the bcm57xx package. I have tested default vlan functions, but I dont have the equipment to test more advanced setups. The default vlan setup seems to be working fine. I also added the activate_gpio parameter which will make the driver activate the switch via gpio before probing for it. I'm not sure which method is best for autoload. For the wrt350n, I need the activate_gpio parameter. But its probably not a good idea to add that to the autoload file. On a system without a bcm57xx switch, isn't it a bad idea to mess with the gpios looking for the switch? Ideally, wouldn't it be best to load the bcm57xx module from broadcom-diag, after it has determined which router its on? I tried using 'request_module' from there, but had no success. For now, I am relying on preinit to load the bcm57xx module with activate_gpio param, after it has failed to load switch_robo and switch_adm. Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11471 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
nbd
123
package/broadcom-57xx/src/proto/802.11e.h
Normal file
123
package/broadcom-57xx/src/proto/802.11e.h
Normal file
@@ -0,0 +1,123 @@
|
||||
/*
|
||||
* 802.11e protocol header file
|
||||
*
|
||||
* Copyright 2007, Broadcom Corporation
|
||||
* All Rights Reserved.
|
||||
*
|
||||
* THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
|
||||
* KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
|
||||
* SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
|
||||
* FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
|
||||
*
|
||||
* $Id: 802.11e.h,v 1.1.1.2 2007/05/31 08:00:41 michael Exp $
|
||||
*/
|
||||
|
||||
#ifndef _802_11e_H_
|
||||
#define _802_11e_H_
|
||||
|
||||
/* enable structure packing */
|
||||
#if defined(__GNUC__)
|
||||
#define PACKED __attribute__((packed))
|
||||
#else
|
||||
#pragma pack(1)
|
||||
#define PACKED
|
||||
#endif
|
||||
|
||||
#ifdef BCMDBG
|
||||
extern const char *aci_names[];
|
||||
#endif /* BCMDBG */
|
||||
|
||||
/* WME Traffic Specification (TSPEC) element */
|
||||
#define WME_TSPEC_HDR_LEN 2 /* WME TSPEC header length */
|
||||
#define WME_TSPEC_BODY_OFF 2 /* WME TSPEC body offset */
|
||||
|
||||
#define WME_CATEGORY_CODE_OFFSET 0 /* WME Category code offset */
|
||||
#define WME_ACTION_CODE_OFFSET 1 /* WME Action code offset */
|
||||
#define WME_TOKEN_CODE_OFFSET 2 /* WME Token code offset */
|
||||
#define WME_STATUS_CODE_OFFSET 3 /* WME Status code offset */
|
||||
|
||||
struct tsinfo {
|
||||
uint8 octets[3];
|
||||
} PACKED;
|
||||
|
||||
typedef struct tsinfo tsinfo_t;
|
||||
|
||||
/* 802.11e TSPEC IE */
|
||||
typedef struct tspec {
|
||||
uint8 oui[DOT11_OUI_LEN]; /* WME_OUI */
|
||||
uint8 type; /* WME_TYPE */
|
||||
uint8 subtype; /* WME_SUBTYPE_TSPEC */
|
||||
uint8 version; /* WME_VERSION */
|
||||
tsinfo_t tsinfo; /* TS Info bit field */
|
||||
uint16 nom_msdu_size; /* (Nominal or fixed) MSDU Size (bytes) */
|
||||
uint16 max_msdu_size; /* Maximum MSDU Size (bytes) */
|
||||
uint32 min_srv_interval; /* Minimum Service Interval (us) */
|
||||
uint32 max_srv_interval; /* Maximum Service Interval (us) */
|
||||
uint32 inactivity_interval; /* Inactivity Interval (us) */
|
||||
uint32 suspension_interval; /* Suspension Interval (us) */
|
||||
uint32 srv_start_time; /* Service Start Time (us) */
|
||||
uint32 min_data_rate; /* Minimum Data Rate (bps) */
|
||||
uint32 mean_data_rate; /* Mean Data Rate (bps) */
|
||||
uint32 peak_data_rate; /* Peak Data Rate (bps) */
|
||||
uint32 max_burst_size; /* Maximum Burst Size (bytes) */
|
||||
uint32 delay_bound; /* Delay Bound (us) */
|
||||
uint32 min_phy_rate; /* Minimum PHY Rate (bps) */
|
||||
uint16 surplus_bw; /* Surplus Bandwidth Allowance Factor */
|
||||
uint16 medium_time; /* Medium Time (32 us/s periods) */
|
||||
} PACKED tspec_t;
|
||||
|
||||
#define WME_TSPEC_LEN (sizeof(tspec_t)) /* not including 2-bytes of header */
|
||||
|
||||
/* ts_info */
|
||||
/* 802.1D priority is duplicated - bits 13-11 AND bits 3-1 */
|
||||
#define TS_INFO_TID_SHIFT 1 /* TS info. TID shift */
|
||||
#define TS_INFO_TID_MASK (0xf << TS_INFO_TID_SHIFT) /* TS info. TID mask */
|
||||
#define TS_INFO_CONTENTION_SHIFT 7 /* TS info. contention shift */
|
||||
#define TS_INFO_CONTENTION_MASK (0x1 << TS_INFO_CONTENTION_SHIFT) /* TS info. contention mask */
|
||||
#define TS_INFO_DIRECTION_SHIFT 5 /* TS info. direction shift */
|
||||
#define TS_INFO_DIRECTION_MASK (0x3 << TS_INFO_DIRECTION_SHIFT) /* TS info. direction mask */
|
||||
#define TS_INFO_PSB_SHIFT 2 /* TS info. PSB bit Shift */
|
||||
#define TS_INFO_PSB_MASK (1 << TS_INFO_PSB_SHIFT) /* TS info. PSB mask */
|
||||
#define TS_INFO_UPLINK (0 << TS_INFO_DIRECTION_SHIFT) /* TS info. uplink */
|
||||
#define TS_INFO_DOWNLINK (1 << TS_INFO_DIRECTION_SHIFT) /* TS info. downlink */
|
||||
#define TS_INFO_BIDIRECTIONAL (3 << TS_INFO_DIRECTION_SHIFT) /* TS info. bidirectional */
|
||||
#define TS_INFO_USER_PRIO_SHIFT 3 /* TS info. user priority shift */
|
||||
/* TS info. user priority mask */
|
||||
#define TS_INFO_USER_PRIO_MASK (0x7 << TS_INFO_USER_PRIO_SHIFT)
|
||||
|
||||
/* Macro to get/set bit(s) field in TSINFO */
|
||||
#define WLC_CAC_GET_TID(pt) ((((pt).octets[0]) & TS_INFO_TID_MASK) >> TS_INFO_TID_SHIFT)
|
||||
#define WLC_CAC_GET_DIR(pt) ((((pt).octets[0]) & \
|
||||
TS_INFO_DIRECTION_MASK) >> TS_INFO_DIRECTION_SHIFT)
|
||||
#define WLC_CAC_GET_PSB(pt) ((((pt).octets[1]) & WLC_CAC_PSB_MASK) >> WLC_CAC_PSB_SHIFT)
|
||||
#define WLC_CAC_GET_USER_PRIO(pt) ((((pt).octets[1]) & \
|
||||
TS_INFO_USER_PRIO_MASK) >> TS_INFO_USER_PRIO_SHIFT)
|
||||
|
||||
#define WLC_CAC_SET_TID(pt, id) ((((pt).octets[0]) & (~TS_INFO_TID_MASK)) | \
|
||||
((id) << TS_INFO_TID_SHIFT))
|
||||
#define WLC_CAC_SET_USER_PRIO(pt, prio) ((((pt).octets[0]) & (~TS_INFO_USER_PRIO_MASK)) | \
|
||||
((prio) << TS_INFO_USER_PRIO_SHIFT))
|
||||
|
||||
/* 802.11e QBSS Load IE */
|
||||
#define QBSS_LOAD_IE_LEN 5 /* QBSS Load IE length */
|
||||
#define QBSS_LOAD_AAC_OFF 3 /* AAC offset in IE */
|
||||
|
||||
#define CAC_ADDTS_RESP_TIMEOUT 300 /* default ADDTS response timeout in ms */
|
||||
|
||||
/* 802.11e ADDTS status code */
|
||||
#define DOT11E_STATUS_ADMISSION_ACCEPTED 0 /* TSPEC Admission accepted status */
|
||||
#define DOT11E_STATUS_ADDTS_INVALID_PARAM 1 /* TSPEC invalid parameter status */
|
||||
#define DOT11E_STATUS_ADDTS_REFUSED_NSBW 3 /* ADDTS refused (non-sufficient BW) */
|
||||
|
||||
/* 802.11e DELTS status code */
|
||||
#define DOT11E_STATUS_QSTA_LEAVE_QBSS 36 /* STA leave QBSS */
|
||||
#define DOT11E_STATUS_END_TS 37 /* END TS */
|
||||
#define DOT11E_STATUS_UNKNOWN_TS 38 /* UNKNOWN TS */
|
||||
#define DOT11E_STATUS_QSTA_REQ_TIMEOUT 39 /* STA ADDTS request timeout */
|
||||
|
||||
#undef PACKED
|
||||
#if !defined(__GNUC__)
|
||||
#pragma pack()
|
||||
#endif
|
||||
|
||||
#endif /* _802_11e_CAC_H_ */
|
||||
Reference in New Issue
Block a user