strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8653 3c298f89-4303-0410-b956-a3cf2f4a3e73
2025-04-21 12:27:27 +03:00 · 2007-09-06 16:27:37 +00:00
parent 5389989aba
commit 17c7b6c3fd
701 changed files with 48 additions and 105 deletions
--- a/target/linux/rdc/Makefile
+++ b/target/linux/rdc/Makefile
@@ -0,0 +1,38 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=i386
+BOARD:=rdc
+BOARDNAME:=RDC321x x86
+FEATURES:=squashfs jffs2 broken
+
+LINUX_VERSION:=2.6.22.4
+
+define Target/Description
+        Build firmware images for RDC321x based routers
+        (e.g. Airlink101 AR525W, Linksys WRT54R, Sitecom WL-153)
+endef
+
+include $(INCLUDE_DIR)/kernel-build.mk
+
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
+    define Kernel/SetInitramfs
+	echo "r6040 parent=wlan0" > $(TARGET_DIR)/etc/modules.d/99-r6040
+	$(RM) $(TARGET_DIR)/sbin/init
+	ln -s /etc/preinit $(TARGET_DIR)/sbin/init
+	sed -i 's,exec /sbin/init,exec /bin/busybox init,g' $(TARGET_DIR)/etc/preinit
+	sed -i 's,/sbin/init,/bin/busybox init,g' $(TARGET_DIR)/init
+	mv $(TARGET_DIR)/init $(TARGET_DIR)/linuxrc
+	sed -i 's,eth0,eth1,g' $(TARGET_DIR)/etc/config/network
+    endef
+endif
+
+# include the profiles
+-include profiles/*.mk
+
+$(eval $(call BuildKernel))
--- a/target/linux/rdc/base-files/default/etc/diag.sh
+++ b/target/linux/rdc/base-files/default/etc/diag.sh
@@ -0,0 +1,19 @@
+#!/bin/sh
+# Copyright (C) 2007 OpenWrt.org
+
+set_led() {
+	local led="$1"
+	local state="$2"
+	[ -d "/sys/class/leds/rdc321x:$led" ] && echo "$state" > "/sys/class/leds/rdc321x:$led/brightness"
+}
+
+set_state() {
+	case "$1" in
+		preinit)
+			set_led dmz 1
+		;;
+		done)
+			set_led dmz 0
+		;;
+	esac
+}
--- a/target/linux/rdc/config/default
+++ b/target/linux/rdc/config/default
@@ -0,0 +1,313 @@
+# CONFIG_60XX_WDT is not set
+# CONFIG_8139TOO is not set
+# CONFIG_ACQUIRE_WDT is not set
+# CONFIG_ADVANTECH_WDT is not set
+# CONFIG_AGP is not set
+# CONFIG_ALIM1535_WDT is not set
+# CONFIG_ALIM7101_WDT is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_PIIX=m
+# CONFIG_ATM_DRIVERS is not set
+CONFIG_BASE_SMALL=0
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_BITREVERSE=y
+# CONFIG_BLK_DEV_HD is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDE=m
+CONFIG_BLK_DEV_IDEDISK=m
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BROADCOM_PHY is not set
+CONFIG_CLOCKSOURCE_WATCHDOG=y
+# CONFIG_COMPAT_VDSO is not set
+# CONFIG_CPU5_WDT is not set
+# CONFIG_CPU_FREQ is not set
+CONFIG_CRYPTO_AES_586=m
+CONFIG_CRYPTO_DEV_GEODE=m
+# CONFIG_CRYPTO_DEV_PADLOCK is not set
+CONFIG_CRYPTO_TWOFISH_586=m
+# CONFIG_CS5535_GPIO is not set
+# CONFIG_DCDBAS is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_DELL_RBU is not set
+CONFIG_DEVPORT=y
+CONFIG_DMI=y
+CONFIG_DOUBLEFAULT=y
+# CONFIG_E100 is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_EDAC is not set
+# CONFIG_EDD is not set
+# CONFIG_EUROTECH_WDT is not set
+# CONFIG_FIXED_PHY is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_GEN_RTC is not set
+# CONFIG_HANGCHECK_TIMER is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HID=m
+# CONFIG_HIGHMEM4G is not set
+# CONFIG_HIGHMEM64G is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+# CONFIG_HPET_TIMER is not set
+CONFIG_HUGETLBFS=y
+CONFIG_HUGETLB_PAGE=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_AMD is not set
+# CONFIG_HW_RANDOM_GEODE is not set
+# CONFIG_HW_RANDOM_INTEL is not set
+# CONFIG_HW_RANDOM_VIA is not set
+CONFIG_HZ=250
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+CONFIG_I2C=m
+# CONFIG_I2C_ALGOBIT is not set
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I6300ESB_WDT is not set
+# CONFIG_I8K is not set
+# CONFIG_IB700_WDT is not set
+# CONFIG_IBMASR is not set
+# CONFIG_IBM_ASM is not set
+CONFIG_ICPLUS_PHY=y
+CONFIG_IDE=m
+# CONFIG_IDEPCI_PCIBUS_ORDER is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_PROC_FS is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INPUT=m
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_YEALINK=m
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_ISA is not set
+CONFIG_ISA_DMA_API=y
+# CONFIG_ITCO_WDT is not set
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_RUBIN=y
+CONFIG_JFS_FS=m
+CONFIG_KEXEC=y
+CONFIG_KTIME_SCALAR=y
+# CONFIG_KVM is not set
+CONFIG_LBD=y
+CONFIG_LEDS_RDC3211=y
+CONFIG_LSF=y
+# CONFIG_M386 is not set
+CONFIG_M486=y
+# CONFIG_M586 is not set
+# CONFIG_M586MMX is not set
+# CONFIG_M586TSC is not set
+# CONFIG_M686 is not set
+# CONFIG_MACHZ_WDT is not set
+# CONFIG_MACINTOSH_DRIVERS is not set
+CONFIG_MATH_EMULATION=y
+# CONFIG_MCA is not set
+# CONFIG_MCORE2 is not set
+# CONFIG_MCRUSOE is not set
+# CONFIG_MCYRIXIII is not set
+# CONFIG_MEFFICEON is not set
+# CONFIG_MGEODEGX1 is not set
+# CONFIG_MGEODE_LX is not set
+# CONFIG_MICROCODE is not set
+# CONFIG_MK6 is not set
+# CONFIG_MK7 is not set
+# CONFIG_MK8 is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MPENTIUM4 is not set
+# CONFIG_MPENTIUMII is not set
+# CONFIG_MPENTIUMIII is not set
+# CONFIG_MPENTIUMM is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_CONCAT=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_NETSC520 is not set
+# CONFIG_MTD_ONENAND is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_PNC2000 is not set
+# CONFIG_MTD_RAM is not set
+CONFIG_MTD_RDC3210=y
+CONFIG_MTD_RDC3210_ALLOW_JFFS2=y
+CONFIG_MTD_RDC3210_BUSWIDTH=2
+# CONFIG_MTD_RDC3210_FACTORY_PRESENT is not set
+CONFIG_MTD_RDC3210_SIZE=0x400000
+# CONFIG_MTD_RDC3210_STATIC_MAP is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SC520CDP is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_TS5500 is not set
+# CONFIG_MTRR is not set
+# CONFIG_MVIAC3_2 is not set
+# CONFIG_MVIAC7 is not set
+# CONFIG_MWAVE is not set
+# CONFIG_MWINCHIP2 is not set
+# CONFIG_MWINCHIP3D is not set
+# CONFIG_MWINCHIPC6 is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NETDEV_1000 is not set
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NOHIGHMEM=y
+# CONFIG_NO_HZ is not set
+CONFIG_NR_QUICK=1
+# CONFIG_NSC_GPIO is not set
+CONFIG_NVRAM=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PARAVIRT is not set
+CONFIG_PATA_ARTOP=m
+# CONFIG_PC8736x_GPIO is not set
+# CONFIG_PC87413_WDT is not set
+CONFIG_PCCARD=m
+CONFIG_PCCARD_NONSTATIC=m
+# CONFIG_PCIEPORTBUS is not set
+# CONFIG_PCIPCWATCHDOG is not set
+CONFIG_PCI_BIOS=y
+CONFIG_PCI_DIRECT=y
+CONFIG_PCI_GOANY=y
+# CONFIG_PCI_GOBIOS is not set
+# CONFIG_PCI_GODIRECT is not set
+# CONFIG_PCI_GOMMCONFIG is not set
+CONFIG_PCMCIA=m
+CONFIG_PHYLIB=y
+CONFIG_PHYSICAL_ALIGN=0x100000
+CONFIG_PHYSICAL_START=0x100000
+# CONFIG_PNPACPI is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_QUICKLIST=y
+CONFIG_R6040=m
+# CONFIG_R6040_NAPI is not set
+# CONFIG_RELOCATABLE is not set
+# CONFIG_RTC is not set
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SBC8360_WDT is not set
+# CONFIG_SBC_EPX_C3_WATCHDOG is not set
+# CONFIG_SC1200_WDT is not set
+# CONFIG_SC520_WDT is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SCx200 is not set
+# CONFIG_SCx200_ACB is not set
+# CONFIG_SECCOMP is not set
+CONFIG_SEMAPHORE_SLEEPERS=y
+# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SMP is not set
+# CONFIG_SMSC37B787_WDT is not set
+# CONFIG_SMSC_PHY is not set
+CONFIG_SOFT_WATCHDOG=m
+# CONFIG_SONYPI is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_TELCLOCK is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_TOSHIBA is not set
+CONFIG_UID16=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_HCD=m
+CONFIG_USB_PWC=m
+# CONFIG_USB_PWC_DEBUG is not set
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_V4L_USB_DRIVERS=y
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+CONFIG_VIDEO_CPIA2=m
+CONFIG_VIDEO_V4L1=y
+# CONFIG_VM86 is not set
+# CONFIG_VMSPLIT_1G is not set
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_2G_OPT is not set
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_3G_OPT is not set
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_W83627HF_WDT is not set
+# CONFIG_W83697HF_WDT is not set
+# CONFIG_W83877F_WDT is not set
+# CONFIG_W83977F_WDT is not set
+# CONFIG_WAFER_WDT is not set
+CONFIG_X86=y
+CONFIG_X86_32=y
+CONFIG_X86_ALIGNMENT_16=y
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_BIOS_REBOOT=y
+CONFIG_X86_BSWAP=y
+CONFIG_X86_CMPXCHG=y
+CONFIG_X86_CPUID=y
+# CONFIG_X86_ELAN is not set
+# CONFIG_X86_ES7000 is not set
+CONFIG_X86_F00F_BUG=y
+# CONFIG_X86_GENERIC is not set
+# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_INVLPG=y
+CONFIG_X86_L1_CACHE_SHIFT=4
+# CONFIG_X86_MCE is not set
+CONFIG_X86_MINIMUM_CPU_MODEL=4
+CONFIG_X86_MSR=y
+# CONFIG_X86_NUMAQ is not set
+# CONFIG_X86_PC is not set
+CONFIG_X86_POPAD_OK=y
+CONFIG_X86_PPRO_FENCE=y
+CONFIG_X86_RDC=y
+CONFIG_X86_REBOOTFIXUPS=y
+# CONFIG_X86_SUMMIT is not set
+# CONFIG_X86_UP_APIC is not set
+# CONFIG_X86_VISWS is not set
+# CONFIG_X86_VOYAGER is not set
+CONFIG_X86_WP_WORKS_OK=y
+CONFIG_X86_XADD=y
--- a/target/linux/rdc/config/profile-wl153
+++ b/target/linux/rdc/config/profile-wl153
@@ -0,0 +1,2 @@
+# CONFIG_MTD_RDC3210_ALLOW_JFFS2 is not set
+CONFIG_MTD_RDC3210_SIZE=0x200000
--- a/target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c
+++ b/target/linux/rdc/files/arch/i386/kernel/cpu/rdc.c
@@ -0,0 +1,24 @@
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+
+#include "cpu.h"
+
+static struct cpu_dev rdc_cpu_dev __cpuinitdata = {
+        .c_vendor       = "RDC",
+        .c_models = {
+                { .vendor = X86_VENDOR_RDC, .family = 4, .model_names =
+                  {
+                          [0] = "R861x(-G)",
+                  }
+                },
+        },
+};
+
+int __init rdc_init_cpu(void)
+{
+        cpu_devs[X86_VENDOR_RDC] = &rdc_cpu_dev;
+        return 0;
+}
--- a/target/linux/rdc/files/arch/i386/mach-rdc/Makefile
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the RDC321x specific parts of the kernel
+#
+obj-$(CONFIG_X86_RDC)        := gpio.o platform.o wdt.o
+
--- a/target/linux/rdc/files/arch/i386/mach-rdc/gpio.c
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/gpio.c
@@ -0,0 +1,91 @@
+/*
+ *  Copyright (C) 2007, OpenWrt.org, Florian Fainelli <florian@openwrt.org>
+ *  	RDC321x architecture specific GPIO support
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ */
+
+#include <linux/autoconf.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <asm/mach-rdc/rdc321x_defs.h>
+
+static inline int rdc_gpio_is_valid(unsigned gpio)
+{
+	return (gpio <= RDC_MAX_GPIO);
+}
+
+static unsigned int rdc_gpio_read(unsigned gpio)
+{
+	unsigned int val;
+
+	val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x84:0x48));
+        outl(val, RDC3210_CFGREG_ADDR);
+        udelay(10);
+        val = inl(RDC3210_CFGREG_DATA);
+        val |= (0x1 << (gpio & 0x1F));
+        outl(val, RDC3210_CFGREG_DATA);
+        udelay(10);
+        val = 0x80000000 | (7 << 11) | ((gpio&0x20?0x88:0x4C));
+        outl(val, RDC3210_CFGREG_ADDR);
+        udelay(10);
+        val = inl(RDC3210_CFGREG_DATA);
+
+	return val;
+}
+
+static void rdc_gpio_write(unsigned int val)
+{
+	if (val) {
+		outl(val, RDC3210_CFGREG_DATA);
+		udelay(10);
+	}
+}
+
+int rdc_gpio_get_value(unsigned gpio)
+{
+	if (rdc_gpio_is_valid(gpio))
+		return (int)rdc_gpio_read(gpio);
+	else
+		return -EINVAL;
+}
+EXPORT_SYMBOL(rdc_gpio_get_value);
+
+void rdc_gpio_set_value(unsigned gpio, int value)
+{
+	unsigned int val;
+
+	if (!rdc_gpio_is_valid(gpio))
+		return;
+	
+	val = rdc_gpio_read(gpio);
+
+	if (value)
+		val &= ~(0x1 << (gpio & 0x1F));
+	else
+		val |= (0x1 << (gpio & 0x1F));
+
+	rdc_gpio_write(val);
+}
+EXPORT_SYMBOL(rdc_gpio_set_value);
+
+int rdc_gpio_direction_input(unsigned gpio)
+{
+	return 0;
+}
+EXPORT_SYMBOL(rdc_gpio_direction_input);
+
+int rdc_gpio_direction_output(unsigned gpio, int value)
+{
+	return 0;
+}
+EXPORT_SYMBOL(rdc_gpio_direction_output);
+
+
--- a/target/linux/rdc/files/arch/i386/mach-rdc/platform.c
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/platform.c
@@ -0,0 +1,83 @@
+/*
+ *  $Id: platform.c 8331 2007-08-03 15:59:23Z florian $
+ *
+ *  Generic RDC321x platform devices
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+
+#include <asm/gpio.h>
+
+#define PFX "rdc321x: "
+
+/* FIXME : Flash */
+static struct resource rdc_flash_resource[] = {
+	[0] = {
+		.start = (u32)-CONFIG_MTD_RDC3210_SIZE,
+		.end = (u32)-1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device rdc_flash_device = {
+	.name = "rdc321x-flash",
+	.id = -1,
+	.num_resources = ARRAY_SIZE(rdc_flash_resource),
+	.resource = rdc_flash_resource,
+};
+
+/* LEDS */
+static struct platform_device rdc321x_leds = {
+	.name = "rdc321x-leds",
+	.id = -1,
+	.num_resources = 0,
+};
+
+static struct platform_device rdc321x_wdt = {
+	.name = "rdc321x-wdt",
+	.id = -1,
+	.num_resources = 0,
+};
+
+static int __init rdc_board_setup(void)
+{
+	int err;
+
+	err = platform_device_register(&rdc_flash_device);
+	if (err)
+		printk(KERN_ALERT PFX "failed to register flash\n");
+
+	err = platform_device_register(&rdc321x_leds);
+	if (err)
+		printk(KERN_ALERT PFX "failed to register LEDS\n");
+
+	err = platform_device_register(&rdc321x_wdt);
+		printk(KERN_ALERT PFX "failed to register watchdog\n");
+
+	return err; 
+}
+
+arch_initcall(rdc_board_setup);
--- a/target/linux/rdc/files/arch/i386/mach-rdc/wdt.c
+++ b/target/linux/rdc/files/arch/i386/mach-rdc/wdt.c
@@ -0,0 +1,272 @@
+/*
+ * RDC321x watchdog driver
+ *
+ * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *
+ * This driver is highly inspired from the cpu5_wdt driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/miscdevice.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/timer.h>
+#include <linux/completion.h>
+#include <linux/jiffies.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#include <asm/mach-rdc/rdc321x_defs.h>
+
+#define RDC_WDT_MASK		0x80000000	/* Mask */
+#define RDC_WDT_EN		0x00800000 	/* Enable bit */
+#define RDC_WDT_WTI		0x00200000	/* Generate a CPU reset/NMI/WDT irq when WDT timeout is reached */
+#define RDC_WDT_RST		0x00100000	/* Reset bit */
+#define RDC_WDT_WIF		0x00040000	/* WDT IRQ Flag */
+#define RDC_WDT_IRT		0x00000100	/* IRQ Routing table */
+#define RDC_WDT_CNT		0x00000001	/* WDT count */
+
+#define RDC_CLS_TMR		0x80003844	/* Clear timer */
+
+#define RDC_WDT_INTERVAL	(HZ/10+1)
+
+int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int ticks = 1000;
+
+/* some device data */
+
+static struct {
+	struct completion stop;
+	volatile int running;
+	struct timer_list timer;
+	volatile int queue;
+	int default_ticks;
+	unsigned long inuse;
+} rdc321x_wdt_device;
+
+/* generic helper functions */
+
+static void rdc321x_wdt_trigger(unsigned long unused)
+{
+	if( rdc321x_wdt_device.running )
+		ticks--;
+
+	/* keep watchdog alive */
+	outl(RDC_WDT_EN|inl(RDC3210_CFGREG_DATA), RDC3210_CFGREG_DATA);	
+	
+	/* requeue?? */
+	if (rdc321x_wdt_device.queue && ticks)
+		mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
+	else {
+		/* ticks doesn't matter anyway */
+		complete(&rdc321x_wdt_device.stop);
+	}
+
+}
+
+static void rdc321x_wdt_reset(void)
+{
+	ticks = rdc321x_wdt_device.default_ticks;
+}
+
+static void rdc321x_wdt_start(void)
+{
+	if (!rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 1;
+
+		/* Clear the timer */
+		outl(RDC_CLS_TMR, RDC3210_CFGREG_ADDR);
+		
+		/* Enable watchdog and set the timeout to 81.92 us */
+		outl(RDC_WDT_EN|RDC_WDT_CNT, RDC3210_CFGREG_DATA);
+
+		mod_timer(&rdc321x_wdt_device.timer, jiffies + RDC_WDT_INTERVAL);
+	}
+
+	/* if process dies, counter is not decremented */
+	rdc321x_wdt_device.running++;
+}
+
+static int rdc321x_wdt_stop(void)
+{
+	if (rdc321x_wdt_device.running)
+		rdc321x_wdt_device.running = 0;
+
+	ticks = rdc321x_wdt_device.default_ticks;
+
+	return -EIO;
+}
+
+/* filesystem operations */
+
+static int rdc321x_wdt_open(struct inode *inode, struct file *file)
+{
+	if (test_and_set_bit(0, &rdc321x_wdt_device.inuse))
+		return -EBUSY;
+
+	return nonseekable_open(inode, file);
+}
+
+static int rdc321x_wdt_release(struct inode *inode, struct file *file)
+{
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+	return 0;
+}
+
+static int rdc321x_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+	void __user *argp = (void __user *)arg;
+	unsigned int value;
+	static struct watchdog_info ident =
+	{
+		.options = WDIOF_CARDRESET,
+		.identity = "RDC321x WDT",
+	};
+
+	switch(cmd) {
+		case WDIOC_KEEPALIVE:
+			rdc321x_wdt_reset();
+			break;
+		case WDIOC_GETSTATUS:
+			/* Read the value from the DATA register */
+			value = inl(RDC3210_CFGREG_DATA);
+			if ( copy_to_user(argp, &value, sizeof(int)) )
+				return -EFAULT;
+			break;
+		case WDIOC_GETSUPPORT:
+			if ( copy_to_user(argp, &ident, sizeof(ident)) )
+				return -EFAULT;
+			break;
+		case WDIOC_SETOPTIONS:
+			if ( copy_from_user(&value, argp, sizeof(int)) )
+				return -EFAULT;
+			switch(value) {
+				case WDIOS_ENABLECARD:
+					rdc321x_wdt_start();
+					break;
+				case WDIOS_DISABLECARD:
+					return rdc321x_wdt_stop();
+				default:
+					return -EINVAL;
+			}
+			break;
+		default:
+    			return -ENOTTY;
+	}
+	return 0;
+}
+
+static ssize_t rdc321x_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
+{
+	if ( !count )
+		return -EIO;
+
+	rdc321x_wdt_reset();
+
+	return count;
+}
+
+static const struct file_operations rdc321x_wdt_fops = {
+	.owner		= THIS_MODULE,
+	.llseek		= no_llseek,
+	.ioctl		= rdc321x_wdt_ioctl,
+	.open		= rdc321x_wdt_open,
+	.write		= rdc321x_wdt_write,
+	.release	= rdc321x_wdt_release,
+};
+
+static struct miscdevice rdc321x_wdt_misc = {
+	.minor	= WATCHDOG_MINOR,
+	.name	= "watchdog",
+	.fops	= &rdc321x_wdt_fops,
+};
+
+static int __devinit rdc321x_wdt_probe(struct platform_device *pdev)
+{
+	int err;
+
+	if ( (err = misc_register(&rdc321x_wdt_misc)) < 0 ) {
+		printk(KERN_ERR PFX "misc_register failed\n");
+		return err;
+	}
+
+	/* Reset the watchdog */
+	outl(RDC_WDT_RST, RDC3210_CFGREG_DATA);
+
+	init_completion(&rdc321x_wdt_device.stop);
+	rdc321x_wdt_device.queue = 0;
+
+	clear_bit(0, &rdc321x_wdt_device.inuse);
+
+	setup_timer(&rdc321x_wdt_device.timer, rdc321x_wdt_trigger, 0);
+
+	rdc321x_wdt_device.default_ticks = ticks;
+
+	printk(KERN_INFO PFX "init success\n");
+
+	return 0;
+}
+
+static int rdc321x_wdt_remove(struct platform_device *pdev)
+{
+	if (rdc321x_wdt_device.queue) {
+		rdc321x_wdt_device.queue = 0;
+		wait_for_completion(&rdc321x_wdt_device.stop);
+	}
+
+	misc_deregister(&rdc321x_wdt_misc);
+
+	return 0;
+}
+
+static struct platform_driver rdc321x_wdt_driver = {
+	.probe = rdc321x_wdt_probe,
+	.remove = rdc321x_wdt_remove,
+	.driver = {
+		.owner = THIS_MODULE,
+		.name = "rdc321x_wdt",
+	},
+};
+
+static int __init rdc321x_wdt_init(void)
+{
+	return platform_driver_register(&rdc321x_wdt_driver);
+}
+
+static void __exit rdc321x_wdt_exit(void)
+{
+	platform_driver_unregister(&rdc321x_wdt_driver);
+}
+
+module_init(rdc321x_wdt_init);
+module_exit(rdc321x_wdt_exit);
+
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
--- a/target/linux/rdc/files/drivers/leds/leds-rdc3211.c
+++ b/target/linux/rdc/files/drivers/leds/leds-rdc3211.c
@@ -0,0 +1,71 @@
+/*
+ * LED driver for RDC3211 boards
+ *
+ * Copyright 2007 Florian Fainelli <florian@openwrt.org>
+ * 
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/err.h>
+
+#include <asm/gpio.h>
+
+static void rdc321x_led_set(struct led_classdev *led_cdev, enum led_brightness brightness)
+{
+	gpio_set_value(1, brightness ? 1 : 0);
+}
+
+/* The DMZ led is at GPIO line 1 */
+static struct led_classdev rdc321x_dmz_led = {
+	.name = "rdc321x:dmz",
+	.brightness_set = rdc321x_led_set,
+};
+
+static int rdc321x_leds_probe(struct platform_device *pdev)
+{
+	return led_classdev_register(&pdev->dev, &rdc321x_dmz_led);
+}
+
+static int rdc321x_leds_remove(struct platform_device *pdev)
+{
+	led_classdev_unregister(&rdc321x_dmz_led);
+	return 0;
+}
+
+static struct platform_driver rdc321x_leds_driver = {
+	.probe = rdc321x_leds_probe,
+	.remove = rdc321x_leds_remove,
+	.driver = {
+		.name = "rdc321x-leds",
+		.owner = THIS_MODULE,
+	}
+};
+
+static int __init rdc321x_leds_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&rdc321x_leds_driver);
+
+	return ret;
+}
+		
+static void __exit rdc321x_leds_exit(void)
+{
+	platform_driver_unregister(&rdc321x_leds_driver);
+}
+
+module_init(rdc321x_leds_init);
+module_exit(rdc321x_leds_exit);
+		
+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
+MODULE_DESCRIPTION("RDC321x LED driver");
+MODULE_LICENSE("GPL");
--- a/target/linux/rdc/files/drivers/mtd/maps/imghdr.h
+++ b/target/linux/rdc/files/drivers/mtd/maps/imghdr.h
@@ -0,0 +1,25 @@
+#ifndef GT_IMGHDR_H
+#define GT_IMGHDR_H
+
+#define GTIMG_MAGIC		"GMTK"
+
+/* Product ID */
+#define PID_RTL_AIRGO		1
+#define PID_RTL_RALINK		2
+#define PID_RDC_AIRGO		3
+#define PID_RDC_RALINK		5	/* White Lable */
+
+/* Gemtek */
+typedef struct
+{
+	u8		magic[4];		/* ASICII: GMTK */
+	u32		checksum;		/* CRC32 */
+	u32		version;		/* x.x.x.x */
+	u32		kernelsz;		/* The size of the kernel image */
+	u32		imagesz;		/* The length of this image file ( kernel + romfs + this header) */
+	u32		pid;			/* Product ID */
+	u32		fastcksum;		/* Partial CRC32 on (First(256), medium(256), last(512)) */
+	u32		reserved;
+}gt_imghdr_t;
+
+#endif
--- a/target/linux/rdc/files/drivers/mtd/maps/rdc3210.c
+++ b/target/linux/rdc/files/drivers/mtd/maps/rdc3210.c
@@ -0,0 +1,379 @@
+/*******************************************************************
+ * Simple Flash mapping for RDC3210                                *
+ *                                                                 *
+ *                                                     2005.03.23  *
+ *                              Dante Su (dante_su@gemtek.com.tw)  *
+ *                          Copyright (C) 2005 Gemtek Corporation  *
+ *******************************************************************/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/autoconf.h>
+#include <linux/sched.h>
+#include <linux/squashfs_fs.h>
+
+static struct mtd_info		*rdc3210_mtd;
+
+struct map_info rdc3210_map = 
+{
+	.name =		"RDC3210 Flash",
+	.size =		CONFIG_MTD_RDC3210_SIZE,
+	.bankwidth =	CONFIG_MTD_RDC3210_BUSWIDTH,
+};
+
+/* Dante: This is the default static mapping, however this is nothing but a hint. (Say dynamic mapping) */
+static struct mtd_partition rdc3210_parts[] = 
+{
+#if CONFIG_MTD_RDC3210_SIZE == 0x400000
+	{ name: "linux",   offset:  0,          size: 0x003C0000 },	/* 3840 KB = (Kernel + ROMFS) = (768 KB + 3072 KB) */
+	{ name: "romfs",   offset:  0x000C0000, size: 0x00300000 },	/* 3072 KB */
+	{ name: "nvram",   offset:  0x003C0000, size: 0x00010000 },	/*   64 KB */
+#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
+	{ name: "factory", offset:  0x003D0000, size: 0x00010000 },	/*   64 KB */
+#endif
+	{ name: "bootldr", offset:  0x003E0000, size: 0x00020000 },	/*  128 KB */
+#elif CONFIG_MTD_RDC3210_SIZE == 0x200000
+	{ name: "linux",   offset:  0x00008000, size: 0x001E8000 },
+	{ name: "romfs",   offset:  0x000C8000, size: 0x00128000 },
+	{ name: "nvram",   offset:  0x00000000, size: 0x00008000 },	/*   64 KB */
+#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
+#error Unsupported configuration!
+#endif
+	{ name: "bootldr", offset:  0x001F0000, size: 0x00010000 },
+#else
+#error Unsupported configuration!
+#endif
+};
+
+static __u32 crctab[257] = {
+	0x00000000, 0x77073096, 0xee0e612c, 0x990951ba,
+	0x076dc419, 0x706af48f, 0xe963a535, 0x9e6495a3,
+	0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
+	0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91,
+	0x1db71064, 0x6ab020f2, 0xf3b97148, 0x84be41de,
+	0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
+	0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec,
+	0x14015c4f, 0x63066cd9, 0xfa0f3d63, 0x8d080df5,
+	0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
+	0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b,
+	0x35b5a8fa, 0x42b2986c, 0xdbbbc9d6, 0xacbcf940,
+	0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
+	0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116,
+	0x21b4f4b5, 0x56b3c423, 0xcfba9599, 0xb8bda50f,
+	0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
+	0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d,
+	0x76dc4190, 0x01db7106, 0x98d220bc, 0xefd5102a,
+	0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
+	0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818,
+	0x7f6a0dbb, 0x086d3d2d, 0x91646c97, 0xe6635c01,
+	0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
+	0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457,
+	0x65b0d9c6, 0x12b7e950, 0x8bbeb8ea, 0xfcb9887c,
+	0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
+	0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2,
+	0x4adfa541, 0x3dd895d7, 0xa4d1c46d, 0xd3d6f4fb,
+	0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
+	0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9,
+	0x5005713c, 0x270241aa, 0xbe0b1010, 0xc90c2086,
+	0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
+	0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4,
+	0x59b33d17, 0x2eb40d81, 0xb7bd5c3b, 0xc0ba6cad,
+	0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
+	0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683,
+	0xe3630b12, 0x94643b84, 0x0d6d6a3e, 0x7a6a5aa8,
+	0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
+	0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe,
+	0xf762575d, 0x806567cb, 0x196c3671, 0x6e6b06e7,
+	0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
+	0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5,
+	0xd6d6a3e8, 0xa1d1937e, 0x38d8c2c4, 0x4fdff252,
+	0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
+	0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60,
+	0xdf60efc3, 0xa867df55, 0x316e8eef, 0x4669be79,
+	0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
+	0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f,
+	0xc5ba3bbe, 0xb2bd0b28, 0x2bb45a92, 0x5cb36a04,
+	0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
+	0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a,
+	0x9c0906a9, 0xeb0e363f, 0x72076785, 0x05005713,
+	0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
+	0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21,
+	0x86d3d2d4, 0xf1d4e242, 0x68ddb3f8, 0x1fda836e,
+	0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
+	0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c,
+	0x8f659eff, 0xf862ae69, 0x616bffd3, 0x166ccf45,
+	0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
+	0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db,
+	0xaed16a4a, 0xd9d65adc, 0x40df0b66, 0x37d83bf0,
+	0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
+	0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6,
+	0xbad03605, 0xcdd70693, 0x54de5729, 0x23d967bf,
+	0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
+	0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d,
+	0
+};
+
+static __u32 crc32(__u8 * buf, __u32 len)
+{
+	register int i;
+	__u32 sum;
+	register __u32 s0;
+	s0 = ~0;
+	for (i = 0; i < len; i++) {
+		s0 = (s0 >> 8) ^ crctab[(__u8) (s0 & 0xFF) ^ buf[i]];
+	}
+	sum = ~s0;
+	return sum;
+}
+
+static void erase_callback(struct erase_info *done)
+{
+	wait_queue_head_t *wait_q = (wait_queue_head_t *)done->priv;
+	wake_up(wait_q);
+}
+
+static int erase_write (struct mtd_info *mtd, unsigned long pos, 
+			int len, const char *buf)
+{
+	struct erase_info erase;
+	DECLARE_WAITQUEUE(wait, current);
+	wait_queue_head_t wait_q;
+	size_t retlen;
+	int ret;
+
+	/*
+	 * First, let's erase the flash block.
+	 */
+
+	init_waitqueue_head(&wait_q);
+	erase.mtd = mtd;
+	erase.callback = erase_callback;
+	erase.addr = pos;
+	erase.len = len;
+	erase.priv = (u_long)&wait_q;
+
+	set_current_state(TASK_INTERRUPTIBLE);
+	add_wait_queue(&wait_q, &wait);
+
+	ret = mtd->erase(mtd, &erase);
+	if (ret) {
+		set_current_state(TASK_RUNNING);
+		remove_wait_queue(&wait_q, &wait);
+		printk (KERN_WARNING "erase of region [0x%lx, 0x%x] "
+				     "on \"%s\" failed\n",
+			pos, len, mtd->name);
+		return ret;
+	}
+
+	schedule();  /* Wait for erase to finish. */
+	remove_wait_queue(&wait_q, &wait);
+
+	/*
+	 * Next, writhe data to flash.
+	 */
+
+	ret = mtd->write (mtd, pos, len, &retlen, buf);
+	if (ret)
+		return ret;
+	if (retlen != len)
+		return -EIO;
+	return 0;
+}
+
+static int __init init_rdc3210_map(void)
+{
+	rdc3210_map.phys = -rdc3210_map.size;
+       	printk(KERN_NOTICE "flash device: %x at %x\n", rdc3210_map.size, rdc3210_map.phys);
+       	
+	rdc3210_map.map_priv_1 = (unsigned long)(rdc3210_map.virt = ioremap_nocache(rdc3210_map.phys, rdc3210_map.size));
+
+	if (!rdc3210_map.map_priv_1) 
+	{
+		printk("Failed to ioremap\n");
+		return -EIO;
+	}
+	rdc3210_mtd = do_map_probe("cfi_probe", &rdc3210_map);
+#ifdef CONFIG_MTD_RDC3210_STATIC_MAP	/* Dante: This is for fixed map */
+	if (rdc3210_mtd) 
+	{
+		rdc3210_mtd->module = THIS_MODULE;
+		add_mtd_partitions(rdc3210_mtd, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0]));
+		return 0;
+	}
+#else	/* Dante: This is for dynamic mapping */
+
+#include "imghdr.h"
+
+	typedef struct {
+		u8	magic[4];
+		u32	kernelsz, ramdisksz;
+		u8	magic2[4];
+		u32	sz2;
+	}sc_imghdr_t;
+
+	if (rdc3210_mtd) 
+	{	// Dante
+		sc_imghdr_t	*hdr2= (sc_imghdr_t *)(rdc3210_map.map_priv_1);
+		gt_imghdr_t	*hdr = (gt_imghdr_t *)hdr2
+#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+			, *ptmp
+#endif
+			;
+		int	len, tmp, tmp2, tmp3, tmp4, hdr_type = 0;
+		
+		if(!memcmp(hdr->magic, GTIMG_MAGIC, 4))
+		{
+			hdr_type = 1;
+			tmp = hdr->kernelsz + sizeof(gt_imghdr_t);
+			tmp2 = rdc3210_mtd->erasesize;
+			tmp3 = ((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32;
+			tmp4 = ((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2;
+		}
+#ifndef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+		else if (!memcmp(hdr2->magic, "CSYS", 4))
+		{
+			hdr_type = 2;
+			tmp = hdr2->ramdisksz + hdr2->kernelsz + sizeof(sc_imghdr_t);
+			tmp2 = rdc3210_mtd->erasesize;
+			tmp3 = ((tmp / 32) + ((tmp % 32) ? 1 : 0)) * 32;
+			tmp4 = ((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2;
+		}
+#endif
+		else
+		{
+			iounmap((void *)rdc3210_map.map_priv_1);
+			rdc3210_map.map_priv_1 = 0L;
+			rdc3210_map.virt = NULL;
+			printk("Invalid MAGIC for Firmware Image!!!\n");
+			return -EIO;
+		}
+#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+		tmp = (tmp3 == tmp4) ? tmp4 + tmp2 : tmp4;
+		if ((ptmp = (gt_imghdr_t *)vmalloc(tmp)) == NULL)
+		{
+			iounmap((void *)rdc3210_map.map_priv_1);
+			rdc3210_map.map_priv_1 = 0L;
+			rdc3210_map.virt = NULL;
+			printk("Can't allocate 0x%08x for flash-reading buffer!\n", tmp);
+			return -ENOMEM;
+		}
+		if (rdc3210_mtd->read(rdc3210_mtd, 0, tmp, &len, (__u8 *)ptmp) || len != tmp)
+		{
+			vfree(ptmp);
+			iounmap((void *)rdc3210_map.map_priv_1);
+			rdc3210_map.map_priv_1 = 0L;
+			rdc3210_map.virt = NULL;
+			printk("Can't read that much flash! Read 0x%08x of it.\n", len);
+			return -EIO;
+		}
+#endif
+#ifdef CONFIG_MTD_RDC3210_FACTORY_PRESENT
+		/* 1. Adjust Redboot */
+		tmp = rdc3210_mtd->size - rdc3210_parts[4].size;
+		rdc3210_parts[4].offset = tmp - (tmp % tmp2);
+		rdc3210_parts[4].size   = rdc3210_mtd->size - rdc3210_parts[4].offset;
+		
+		/* 2. Adjust Factory Default */
+		tmp -= rdc3210_parts[3].size;
+		rdc3210_parts[3].offset = tmp - (tmp % tmp2);
+		rdc3210_parts[3].size   = rdc3210_parts[4].offset - rdc3210_parts[3].offset;
+#else
+		/* 1. Adjust Redboot */
+		tmp = rdc3210_mtd->size - rdc3210_parts[3].size;
+		rdc3210_parts[3].offset = tmp - (tmp % tmp2);
+		rdc3210_parts[3].size   = rdc3210_mtd->size - rdc3210_parts[3].offset;
+#endif
+		if (hdr_type == 1) {
+		/* 3. Adjust NVRAM */
+#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+		if (*(__u32 *)(((unsigned char *)ptmp)+tmp3) == SQUASHFS_MAGIC)
+		{
+			len = 1;
+			tmp4 = tmp3;
+			tmp = hdr->imagesz;
+		rdc3210_parts[2].name   = "rootfs_data";
+		rdc3210_parts[2].offset = rdc3210_parts[0].offset + (((tmp / tmp2) + ((tmp % tmp2) ? 1 : 0)) * tmp2);
+		}
+		else
+#else
+			tmp4 = tmp3;
+#endif
+		{
+			len = 0;
+		tmp -= rdc3210_parts[2].size;
+		rdc3210_parts[2].offset = tmp - (tmp % tmp2);
+		}
+		rdc3210_parts[2].size   = rdc3210_parts[3].offset - rdc3210_parts[2].offset;
+		}
+		else if (hdr_type == 2)
+		{
+			len = 0;
+			tmp4 = tmp3;
+		}
+		
+		/* 4. Adjust Linux (Kernel + ROMFS) */
+		rdc3210_parts[0].size   = rdc3210_parts[len + hdr_type + 1].offset - rdc3210_parts[0].offset;
+
+		/* 5. Adjust ROMFS */
+		rdc3210_parts[1].offset = rdc3210_parts[0].offset + tmp4;
+		rdc3210_parts[1].size   = rdc3210_parts[hdr_type + 1].offset - rdc3210_parts[1].offset;
+#ifdef CONFIG_MTD_RDC3210_ALLOW_JFFS2
+		if (!(hdr->reserved || len))
+		{
+			__u8	buf[1024];
+			ptmp->reserved = hdr->imagesz;
+			ptmp->imagesz  = tmp4;
+			ptmp->checksum = ptmp->fastcksum = 0;
+			memcpy(buf, ptmp, 0x100);
+			memcpy(buf + 0x100, ((__u8 *)ptmp) + ((tmp4 >> 1) - ((tmp4 & 0x6) >> 1)), 0x100);
+			memcpy(buf + 0x200, ((__u8 *)ptmp) + (tmp4 - 0x200), 0x200);
+			ptmp->fastcksum = crc32(buf, sizeof(buf));
+			ptmp->checksum = crc32((__u8 *)ptmp, tmp4);
+			if (rdc3210_mtd->unlock) rdc3210_mtd->unlock(rdc3210_mtd, 0, tmp2);
+			if ((len = erase_write(rdc3210_mtd, 0, tmp2, (char *)ptmp)))
+			{
+				vfree(ptmp);
+				iounmap((void *)rdc3210_map.map_priv_1);
+				rdc3210_map.map_priv_1 = 0L;
+				rdc3210_map.virt = NULL;
+				printk("Couldn't erase! Got %d.\n", len);
+				return len;
+			}
+			if (rdc3210_mtd->sync) rdc3210_mtd->sync(rdc3210_mtd);
+		}
+		vfree(ptmp);
+#endif
+		rdc3210_mtd->owner = THIS_MODULE;
+		add_mtd_partitions(rdc3210_mtd, rdc3210_parts, sizeof(rdc3210_parts)/sizeof(rdc3210_parts[0]));
+		return 0;
+	}
+#endif
+	iounmap((void *)rdc3210_map.map_priv_1);
+	rdc3210_map.map_priv_1 = 0L;
+	rdc3210_map.virt = NULL;
+	return -ENXIO;
+}
+
+static void __exit cleanup_rdc3210_map(void)
+{
+	if (rdc3210_mtd) 
+	{
+		del_mtd_partitions(rdc3210_mtd);
+		map_destroy(rdc3210_mtd);
+	}
+	
+	if (rdc3210_map.map_priv_1) 
+	{
+		iounmap((void *)rdc3210_map.map_priv_1);
+		rdc3210_map.map_priv_1 = 0L;
+		rdc3210_map.virt = NULL;
+	}
+}
+
+module_init(init_rdc3210_map);
+module_exit(cleanup_rdc3210_map);
--- a/target/linux/rdc/files/drivers/net/r6040.c
+++ b/target/linux/rdc/files/drivers/net/r6040.c
--- a/target/linux/rdc/files/include/asm-i386/gpio.h
+++ b/target/linux/rdc/files/include/asm-i386/gpio.h
@@ -0,0 +1,6 @@
+#ifndef _ASM_I386_GPIO_H
+#define _ASM_I386_GPIO_H
+
+#include <gpio.h>
+
+#endif /* _ASM_I386_GPIO_H */
--- a/target/linux/rdc/files/include/asm-i386/mach-generic/gpio.h
+++ b/target/linux/rdc/files/include/asm-i386/mach-generic/gpio.h
@@ -0,0 +1,15 @@
+#ifndef __ASM_MACH_GENERIC_GPIO_H
+#define __ASM_MACH_GENERIC_GPIO_H
+
+int gpio_request(unsigned gpio, const char *label);
+void gpio_free(unsigned gpio);
+int gpio_direction_input(unsigned gpio);
+int gpio_direction_output(unsigned gpio, int value);
+int gpio_get_value(unsigned gpio);
+void gpio_set_value(unsigned gpio, int value);
+int gpio_to_irq(unsigned gpio);
+int irq_to_gpio(unsigned irq);
+
+#include <asm-generic/gpio.h>           /* cansleep wrappers */
+
+#endif /* __ASM_MACH_GENERIC_GPIO_H */
--- a/target/linux/rdc/files/include/asm-i386/mach-rdc/gpio.h
+++ b/target/linux/rdc/files/include/asm-i386/mach-rdc/gpio.h
@@ -0,0 +1,56 @@
+#ifndef _RDC_GPIO_H
+#define _RDC_GPIO_H
+
+extern int rdc_gpio_get_value(unsigned gpio);
+extern void rdc_gpio_set_value(unsigned gpio, int value);
+extern int rdc_gpio_direction_input(unsigned gpio);
+extern int rdc_gpio_direction_output(unsigned gpio, int value);
+
+
+/* Wrappers for the arch-neutral GPIO API */
+
+static inline int gpio_request(unsigned gpio, const char *label)
+{
+        /* Not yet implemented */
+        return 0;
+}
+
+static inline void gpio_free(unsigned gpio)
+{
+        /* Not yet implemented */
+}
+
+static inline int gpio_direction_input(unsigned gpio)
+{
+        return rdc_gpio_direction_input(gpio);
+}
+
+static inline int gpio_direction_output(unsigned gpio, int value)
+{
+        return rdc_gpio_direction_output(gpio, value);
+}
+
+static inline int gpio_get_value(unsigned gpio)
+{
+        return rdc_gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+        rdc_gpio_set_value(gpio, value);
+}
+
+static inline int gpio_to_irq(unsigned gpio)
+{
+        return gpio;
+}
+
+static inline int irq_to_gpio(unsigned irq)
+{
+        return irq;
+}
+
+/* For cansleep */
+#include <asm-generic/gpio.h>
+
+#endif /* _RDC_GPIO_H_ */
--- a/target/linux/rdc/files/include/asm-i386/mach-rdc/rdc321x_defs.h
+++ b/target/linux/rdc/files/include/asm-i386/mach-rdc/rdc321x_defs.h
@@ -0,0 +1,6 @@
+#define PFX	"rdc321x: "
+
+/* General purpose configuration and data registers */
+#define RDC3210_CFGREG_ADDR     0x0CF8
+#define RDC3210_CFGREG_DATA     0x0CFC
+#define RDC_MAX_GPIO		0x3A
--- a/target/linux/rdc/image/Makefile
+++ b/target/linux/rdc/image/Makefile
@@ -0,0 +1,49 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Image/Prepare
+	$(CP) $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/bzImage
+endef
+
+define trxalign/jffs2-128k
+bs=128k
+endef
+define trxalign/jffs2-64k
+bs=64k
+endef
+define trxalign/squashfs
+bs=1024
+endef
+
+define Image/Build/ar525w
+	touch $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	mv $(KDIR)/root.$(1) $(KDIR)/root.tmp
+	dd of=$(KDIR)/root.$(1) if=$(KDIR)/root.tmp $(call trxalign/$(1)) conv=sync
+	$(RM) $(KDIR)/root.tmp
+	$(STAGING_DIR_HOST)/bin/airlink -b 1 -j $(shell bash -c 'echo $$[$(3)]') $(KDIR)/bzImage $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+endef
+
+define Image/Build/wl153
+	ls -l $(KDIR)/bzImage | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/bzSize
+	gzip -9c $(KDIR)/root.$(1) > $(KDIR)/root.$(1).gz
+	ls -l $(KDIR)/root.$(1).gz | sed -r 's/^[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+[^[:blank:]]+[[:blank:]]+([^[:blank:]]+).+$$$$/\1/' | xargs printf '%.8x' > $(KDIR)/rdSize
+	echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/bzSize)\x$$$$(cut -c 5,6 < $(KDIR)/bzSize)\x$$$$(cut -c 3,4 < $(KDIR)/bzSize)\x$$$$(cut -c 1,2 < $(KDIR)/bzSize)" > $(KDIR)/bzSize.tmp
+	echo -n 'CSYS' > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	cat $(KDIR)/bzSize.tmp >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	echo -ne "\x$$$$(cut -c 7,8 < $(KDIR)/rdSize)\x$$$$(cut -c 5,6 < $(KDIR)/rdSize)\x$$$$(cut -c 3,4 < $(KDIR)/rdSize)\x$$$$(cut -c 1,2 < $(KDIR)/rdSize)WRRM" >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	cat $(KDIR)/bzSize.tmp $(KDIR)/bzImage $(KDIR)/root.$(1).gz >> $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1)-$(2).img
+	$(RM) $(KDIR)/bzSize.tmp $(KDIR)/bzSize $(KDIR)/rdSize
+endef
+
+define Image/Build
+	$(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL).bzImage
+	$(call Image/Build/$(PROFILE),$(1),$(PROFILE),$(patsubst jffs2-%k,%,$(1)))
+endef
+
+$(eval $(call BuildImage))
--- a/target/linux/rdc/patches/000-rdc_fixes.patch
+++ b/target/linux/rdc/patches/000-rdc_fixes.patch
@@ -0,0 +1,71 @@
+diff -urN linux-2.6.19/arch/i386/Kconfig linux-2.6.19.new/arch/i386/Kconfig
+--- linux-2.6.19/arch/i386/Kconfig	2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/arch/i386/Kconfig	2006-12-17 17:13:33.000000000 +0100
+@@ -180,6 +180,14 @@
+ 	  Only choose this option if you have such a system, otherwise you
+ 	  should say N here.
+ 
+config X86_RDC
+	bool "Support for RDC 3211 boards"
+	help
+	  Support for RDC 3211 systems. Say 'Y' here if the kernel is 
+	  supposed to run on an IA-32 RDC R3211 system.
+	  Only choose this option if you have such as system, otherwise you
+	  should say N here.
+
+ endchoice
+ 
+ config ACPI_SRAT
+diff -urN linux-2.6.19/arch/i386/Makefile linux-2.6.19.new/arch/i386/Makefile
+--- linux-2.6.19/arch/i386/Makefile	2006-11-29 22:57:37.000000000 +0100
+++ linux-2.6.19.new/arch/i386/Makefile	2006-12-17 17:13:33.000000000 +0100
+@@ -92,6 +92,10 @@
+ mflags-$(CONFIG_X86_ES7000)	:= -Iinclude/asm-i386/mach-es7000
+ mcore-$(CONFIG_X86_ES7000)	:= mach-default
+ core-$(CONFIG_X86_ES7000)	:= arch/i386/mach-es7000/
+# RDC subarch support
+mflags-$(CONFIG_X86_RDC)	:= -Iinclude/asm-i386/mach-rdc
+mcore-$(CONFIG_X86_RDC)		:= mach-default
+core-$(CONFIG_X86_RDC)		+= arch/i386/mach-rdc/
+ 
+ # default subarch .h files
+ mflags-y += -Iinclude/asm-i386/mach-default
+--- timex.h	2007-08-07 10:44:03.816112250 -0700
+++ linux/include/asm-i386/timex.h	2007-08-07 10:48:47.905866750 -0700
+@@ -11,6 +11,8 @@
+ 
+ #ifdef CONFIG_X86_ELAN
+ #  define CLOCK_TICK_RATE 1189200 /* AMD Elan has different frequency! */
+#elif defined(CONFIG_X86_RDC)
+#  define CLOCK_TICK_RATE 1041667 /* Underlying HZ for R8610 */
+ #else
+ #  define CLOCK_TICK_RATE 1193182 /* Underlying HZ */
+ #endif
+--- reboot_fixups.c	2007-08-07 12:02:00.908412250 -0700
+++ linux/arch/i386/kernel/reboot_fixups.c	2007-08-07 12:18:49.391438500 -0700
+@@ -13,6 +13,17 @@
+ #include <linux/pci.h>
+ #include <asm/reboot_fixups.h>
+ #include <asm/msr.h>
+
+static void r8610_reset(struct pci_dev *dev)
+{
+	int i;
+
+	outl(0x80003840,0xCF8);
+	i=inl(0xCFC);
+	i |= 0x1600;
+	outl(i,0xCFC);
+	outb(1,0x92);
+}
+ 
+ static void cs5530a_warm_reset(struct pci_dev *dev)
+ {
+@@ -40,6 +53,7 @@
+ };
+ 
+ static struct device_fixup fixups_table[] = {
+{ 0x17F3, 0x6030, r8610_reset },
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_LEGACY, cs5530a_warm_reset },
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, cs5536_warm_reset },
+ };
--- a/target/linux/rdc/patches/001-rdc3210_flash_map.patch
+++ b/target/linux/rdc/patches/001-rdc3210_flash_map.patch
@@ -0,0 +1,65 @@
+diff -urN linux-2.6.17/drivers/mtd/maps/Kconfig linux-2.6.17.new/drivers/mtd/maps/Kconfig
+--- linux-2.6.17/drivers/mtd/maps/Kconfig	2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17.new/drivers/mtd/maps/Kconfig	2006-09-24 20:28:11.000000000 +0200
+@@ -76,6 +76,50 @@
+ 	  PNC-2000 is the name of Network Camera product from PHOTRON
+ 	  Ltd. in Japan. It uses CFI-compliant flash.
+ 
+config MTD_RDC3210
+	tristate "CFI Flash device mapped on RDC3210"
+	depends on X86 && MTD_CFI && MTD_PARTITIONS
+	help
+	  RDC-3210 is the flash device we find on Ralink reference board.
+
+config MTD_RDC3210_STATIC_MAP
+	bool "Partitions on RDC3210 mapped statically" if MTD_RDC3210
+	select MTD_RDC3210_FACTORY_PRESENT
+	help
+	  The mapping driver will use the static partition map for the
+	  RDC-3210 flash device.
+
+config MTD_RDC3210_FACTORY_PRESENT
+	bool "Reserve a partition on RDC3210 for factory presets"
+	depends on MTD_RDC3210
+	default y
+	help
+	  The mapping driver will reserve a partition on the RDC-3210 flash
+	  device for resetting flash contents to factory defaults.
+
+config MTD_RDC3210_ALLOW_JFFS2
+	bool "JFFS2 filesystem usable in a partition on RDC3210"
+	depends on MTD_RDC3210 && !MTD_RDC3210_STATIC_MAP
+	help
+	  The mapping driver will align a partition on the RDC-3210 flash
+	  device to an erase-block boundary so that a JFFS2 filesystem may
+	  reside on it.
+
+config MTD_RDC3210_SIZE
+	hex "Amount of flash memory on RDC3210"
+	depends on MTD_RDC3210
+	default "0x400000"
+	help
+	  Total size in bytes of the RDC-3210 flash device
+
+config MTD_RDC3210_BUSWIDTH
+	int "Width of CFI Flash device mapped on RDC3210"
+	depends on MTD_RDC3210
+	default "2"
+	help
+	  Number of bytes addressed on the RDC-3210 flash device before
+	  addressing the same chip again
+
+ config MTD_SC520CDP
+ 	tristate "CFI Flash device mapped on AMD SC520 CDP"
+ 	depends on X86 && MTD_CFI && MTD_CONCAT
+diff -urN linux-2.6.17/drivers/mtd/maps/Makefile linux-2.6.17.new/drivers/mtd/maps/Makefile
+--- linux-2.6.17/drivers/mtd/maps/Makefile	2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17.new/drivers/mtd/maps/Makefile	2006-09-24 20:26:10.000000000 +0200
+@@ -28,6 +28,7 @@
+ obj-$(CONFIG_MTD_PHYSMAP)	+= physmap.o
+ obj-$(CONFIG_MTD_PNC2000)	+= pnc2000.o
+ obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
+obj-$(CONFIG_MTD_RDC3210)	+= rdc3210.o
+ obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
+ obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
+ obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
--- a/target/linux/rdc/patches/002-r6040_ethernet.patch
+++ b/target/linux/rdc/patches/002-r6040_ethernet.patch
@@ -0,0 +1,39 @@
+diff -urN linux-2.6.17/drivers/net/Kconfig linux-2.6.17.new/drivers/net/Kconfig
+--- linux-2.6.17/drivers/net/Kconfig	2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17.new/drivers/net/Kconfig	2006-09-25 13:14:27.000000000 +0200
+@@ -1358,6 +1358,24 @@
+ 	  <file:Documentation/networking/net-modules.txt>.  The module will be
+ 	  called apricot.
+ 
+config R6040
+	tristate "RDC Fast-Ethernet support (EXPERIMENTAL)"
+	depends on NET_PCI && EXPERIMENTAL
+	select MII
+	help
+	  If you have a network (Ethernet) controller of this type, say Y and
+	  read the Ethernet-HOWTO, available from
+          <http://www.tldp.org/docs.html#howto>.
+
+          To compile this driver as a module, choose M here and read
+          <file:Documentation/networking/net-modules.txt>.  The module will be
+          called r6040.
+
+
+config R6040_NAPI
+	bool "NAPI support for R6040"
+	depends on R6040
+	default y
+ config B44
+ 	tristate "Broadcom 4400 ethernet support (EXPERIMENTAL)"
+ 	depends on NET_PCI && PCI && EXPERIMENTAL
+diff -urN linux-2.6.17/drivers/net/Makefile linux-2.6.17.new/drivers/net/Makefile
+--- linux-2.6.17/drivers/net/Makefile	2006-06-18 03:49:35.000000000 +0200
+++ linux-2.6.17.new/drivers/net/Makefile	2006-09-25 13:14:45.000000000 +0200
+@@ -106,6 +106,7 @@
+ obj-$(CONFIG_NE3210) += ne3210.o 8390.o
+ obj-$(CONFIG_NET_SB1250_MAC) += sb1250-mac.o
+ obj-$(CONFIG_B44) += b44.o
+obj-$(CONFIG_R6040) += r6040.o
+ obj-$(CONFIG_FORCEDETH) += forcedeth.o
+ obj-$(CONFIG_NE_H8300) += ne-h8300.o 8390.o
+ 
--- a/target/linux/rdc/patches/003-rootfstype.patch
+++ b/target/linux/rdc/patches/003-rootfstype.patch
@@ -0,0 +1,11 @@
+--- linux-2.6.19.2/init/do_mounts.c	2007-01-10 11:10:37.000000000 -0800
+++ foo/init/do_mounts.c	2007-04-05 13:15:37.000000000 -0700
+@@ -243,6 +243,8 @@
+ {
+ 	char *s = page;
+ 
+	if (!root_fs_names)
+		root_fs_names = "squashfs,jffs2";
+ 	if (root_fs_names) {
+ 		strcpy(page, root_fs_names);
+ 		while (*s++) {
--- a/target/linux/rdc/patches/004-rdc3211_leds.patch
+++ b/target/linux/rdc/patches/004-rdc3211_leds.patch
@@ -0,0 +1,27 @@
+diff -urN linux-2.6.19.2/drivers/leds/Kconfig linux-2.6.19.2.new/drivers/leds/Kconfig
+--- linux-2.6.19.2/drivers/leds/Kconfig	2007-01-10 20:10:37.000000000 +0100
+++ linux-2.6.19.2.new/drivers/leds/Kconfig	2007-04-16 22:09:40.000000000 +0200
+@@ -76,6 +76,12 @@
+ 	  This option enables support for the Soekris net4801 and net4826 error
+ 	  LED.
+ 
+config LEDS_RDC3211
+	tristate "LED Support for RDC3211 boards"
+	depends on LEDS_CLASS && X86_RDC
+	help
+	  This option enables support for the RDC3211 various LEDs.
+
+ comment "LED Triggers"
+ 
+ config LEDS_TRIGGERS
+diff -urN linux-2.6.21.1/drivers/leds/Makefile linux-2.6.21.1.new/drivers/leds/Makefile
+--- linux-2.6.21.1/drivers/leds/Makefile	2007-04-27 23:49:26.000000000 +0200
+++ linux-2.6.21.1.new/drivers/leds/Makefile	2007-05-25 12:19:13.000000000 +0200
+@@ -16,6 +16,7 @@
+ obj-$(CONFIG_LEDS_WRAP)			+= leds-wrap.o
+ obj-$(CONFIG_LEDS_H1940)		+= leds-h1940.o
+ obj-$(CONFIG_LEDS_COBALT)		+= leds-cobalt.o
+obj-$(CONFIG_LEDS_RDC3211)		+= leds-rdc3211.o
+ 
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER)	+= ledtrig-timer.o
--- a/target/linux/rdc/patches/005-rdc_x86_cpu_type.patch
+++ b/target/linux/rdc/patches/005-rdc_x86_cpu_type.patch
@@ -0,0 +1,22 @@
+diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile
+--- linux-2.6.22.1/arch/i386/kernel/cpu/Makefile	2007-08-11 22:16:24.000000000 +0200
+++ linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile	2007-08-13 16:37:32.000000000 +0200
+@@ -12,6 +12,7 @@
+ obj-y	+=	rise.o
+ obj-y	+=	nexgen.o
+ obj-y	+=	umc.o
+obj-$(CONFIG_X86_RDC)	+=	rdc.o
+ 
+ obj-$(CONFIG_X86_MCE)	+=	mcheck/
+ 
+diff -urN linux-2.6.22.1/arch/i386/kernel/cpu/Makefile linux-2.6.22.1.new/arch/i386/kernel/cpu/Makefile
+--- linux-2.6.22.1/include/asm-i386/processor.h	2007-08-13 16:42:25.000000000 +0200
+++ linux-2.6.22.1.new/include/asm-i386/processor.h	2007-08-13 16:51:19.000000000 +0200
+@@ -92,6 +92,7 @@
+ #define X86_VENDOR_TRANSMETA 7
+ #define X86_VENDOR_NSC 8
+ #define X86_VENDOR_NUM 9
+#define X86_VENDOR_RDC 10
+ #define X86_VENDOR_UNKNOWN 0xff
+ 
+ /*
--- a/target/linux/rdc/patches/600-x86_lzma.patch
+++ b/target/linux/rdc/patches/600-x86_lzma.patch
--- a/target/linux/rdc/profiles/AR525W.mk
+++ b/target/linux/rdc/profiles/AR525W.mk
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/ar525w
+  NAME:=AirLink101 AR525W
+  PACKAGES:=kmod-rt61-pci kmod-r6040
+endef
+$(eval $(call Profile,ar525w))
+
--- a/target/linux/rdc/profiles/WL-153.mk
+++ b/target/linux/rdc/profiles/WL-153.mk
@@ -0,0 +1,13 @@
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/wl153
+  NAME:=Sitecom WL-153
+  PACKAGES:=kmod-rt61-pci kmod-r6040
+endef
+$(eval $(call Profile,wl153))
+