[ubicom32]: move new files out from platform support patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19815 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ubicom32/files/arch/ubicom32/Kconfig.debug

@@ -0,0 +1,129 @@
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+	def_bool y
+
+config DEBUG_VERBOSE
+        bool "Verbose fault messages"
+        default y
+        select PRINTK
+        help
+          When a program crashes due to an exception, or the kernel detects
+          an internal error, the kernel can print a not so brief message
+          explaining what the problem was. This debugging information is
+          useful to developers and kernel hackers when tracking down problems,
+          but mostly meaningless to other people. This is always helpful for
+          debugging but serves no purpose on a production system.
+          Most people should say N here.
+
+config PROTECT_KERNEL
+	default y
+	bool 'Enable Kernel range register Protection'
+	help
+	  Adds code to enable/disable range registers to protect static
+	  kernel code/data from userspace.  Currently the ranges covered
+	  do no protect kernel loadable modules or dynamically allocated
+	  kernel data.
+
+config NO_KERNEL_MSG
+	bool "Suppress Kernel BUG Messages"
+	help
+	  Do not output any debug BUG messages within the kernel.
+
+config EARLY_PRINTK
+	bool "Use the driver that you selected as console also for early printk (to debug kernel bootup)."
+	default n
+	help
+	  If you want to use the serdes driver (console=ttyUS0) for
+	  early printk, you must also supply an additional kernel boot
+	  parameter like this:
+
+		serdes=ioportaddr,irq,clockrate,baud
+
+	  For an IP7160RGW eval board, you could use this:
+
+		serdes=0x2004000,61,250000000,57600
+
+	  which will let you see early printk output at 57600 baud.
+
+config STOP_ON_TRAP
+	bool "Enable stopping at the LDSR for all traps"
+	default n
+	help
+	Cause the LDSR to stop all threads whenever a trap is about to be serviced
+
+config STOP_ON_BUG
+	bool "Enable stopping on failed BUG_ON()"
+	default n
+	help
+	Cause all BUG_ON failures to stop all threads
+
+config DEBUG_IRQMEASURE
+	bool "Enable IRQ handler measurements"
+	default n
+	help
+	When enabled each IRQ's min/avg/max times will be printed.  If the handler
+	re-enables interrupt, the times will show the full time including to service
+	nested interrupts.  See /proc/irq_measurements.
+
+config DEBUG_PCIMEASURE
+	bool "Enable PCI transaction measurements"
+	default n
+	help
+	When enabled the system will measure the min/avg/max timer for each PCI transactions.
+	See /proc/pci_measurements.
+
+config ACCESS_OK_CHECKS_ENABLED
+	bool "Enable user space access checks"
+	default n
+	help
+	Enabling this check causes the kernel to verify that addresses passed
+	to the kernel by the user space code are within the processes
+	address space.  On a no-mmu system, this is done by examining the
+	processes memory data structures (adversly affecting performance) but
+	ensuring that a process does not ask the kernel to violate another
+	processes address space.  Sadly, the kernel uses access_ok() for
+	address that are in the kernel which results in a large volume of
+	false positives.
+
+choice
+	prompt "Unaligned Access Support"
+	default UNALIGNED_ACCESS_ENABLED
+	help
+		Kernel / Userspace unaligned access handling.
+
+config  UNALIGNED_ACCESS_ENABLED
+	bool "Kernel and Userspace"
+	help
+
+config  UNALIGNED_ACCESS_USERSPACE_ONLY
+	bool "Userspace Only"
+	help
+
+config  UNALIGNED_ACCESS_DISABLED
+	bool "Disabled"
+	help
+
+endchoice
+
+config DEBUG_STACKOVERFLOW
+	bool "Check for stack overflows"
+	default n
+	depends on DEBUG_KERNEL
+	help
+	  This option will cause messages to be printed if free kernel stack space
+	  drops below a certain limit (THREAD_SIZE /8).
+
+config DEBUG_STACK_USAGE
+	bool "Stack utilization instrumentation"
+	default n
+	depends on DEBUG_KERNEL
+	help
+	  Enables the display of the minimum amount of free kernel stack which each
+	  task has ever had available in the sysrq-T and sysrq-P debug output.
+
+	  This option will slow down process creation somewhat.
+
+source "lib/Kconfig.debug"
+
+endmenu