qi-hardware/openwrt-xburst
1
0
Fork 0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-29 14:39:33 +02:00
Code

jz4740: Cleanup powermanagemnt code. Add inital suspend support.

Browse Source
This commit is contained in:
Lars-Peter Clausen 2009-11-09 17:47:28 +01:00
parent 12f85f8a91
commit 27ca1adf36
4 changed files with 112 additions and 355 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

53
target/linux/xburst/files-2.6.31/arch/mips/jz4740/gpio.c
View File

@ -66,6 +66,9 @@
#define GPIO_TO_BIT(gpio) BIT(gpio & 0x1f) #define GPIO_TO_BIT(gpio) BIT(gpio & 0x1f)
#define GPIO_TO_REG(gpio, reg) (jz_gpio_base + ((gpio >> 5) << 8) + reg) #define GPIO_TO_REG(gpio, reg) (jz_gpio_base + ((gpio >> 5) << 8) + reg)
#define GPIO_TO_MASK_REG(gpio) GPIO_TO_REG(gpio, 0x20)
#define GPIO_TO_MASK_SET_REG(gpio) GPIO_TO_REG(gpio, 0x24)
#define GPIO_TO_MASK_CLEAR_REG(gpio) GPIO_TO_REG(gpio, 0x28)
#define GPIO_TO_PULL_REG(gpio) GPIO_TO_REG(gpio, 0x30) #define GPIO_TO_PULL_REG(gpio) GPIO_TO_REG(gpio, 0x30)
#define GPIO_TO_PULL_SET_REG(gpio) GPIO_TO_REG(gpio, 0x34) #define GPIO_TO_PULL_SET_REG(gpio) GPIO_TO_REG(gpio, 0x34)
#define GPIO_TO_PULL_CLEAR_REG(gpio) GPIO_TO_REG(gpio, 0x38) #define GPIO_TO_PULL_CLEAR_REG(gpio) GPIO_TO_REG(gpio, 0x38)
@ -81,16 +84,23 @@
static void __iomem *jz_gpio_base; static void __iomem *jz_gpio_base;
static spinlock_t jz_gpio_lock; static spinlock_t jz_gpio_lock;
struct jz_gpio_chip { struct jz_gpio_chip {
unsigned int irq;
unsigned int irq_base; unsigned int irq_base;
uint32_t wakeup;
uint32_t saved[4];
struct gpio_chip gpio_chip; struct gpio_chip gpio_chip;
struct irq_chip irq_chip; struct irq_chip irq_chip;
}; };
static struct jz_gpio_chip *jz_irq_to_chip(unsigned int irq)
{
return get_irq_chip_data(irq);
}
int jz_gpio_set_function(int gpio, enum jz_gpio_function function) int jz_gpio_set_function(int gpio, enum jz_gpio_function function)
{ {
if (function == JZ_GPIO_FUNC_NONE) { if (function == JZ_GPIO_FUNC_NONE) {
@ -301,6 +311,18 @@ static int jz_gpio_irq_set_type(unsigned int irq, unsigned int flow_type)
return 0; return 0;
} }
static int jz_gpio_irq_set_wake(unsigned int irq, unsigned int on)
{
struct jz_gpio_chip *chip = jz_irq_to_chip(irq);
if (on) {
chip->wakeup |= IRQ_TO_BIT(irq);
} else {
chip->wakeup &= ~IRQ_TO_BIT(irq);
}
set_irq_wake(chip->irq, on);
return 0;
}
int gpio_to_irq(unsigned gpio) int gpio_to_irq(unsigned gpio)
{ {
return JZ_IRQ_GPIO(0) + gpio; return JZ_IRQ_GPIO(0) + gpio;
@ -333,6 +355,7 @@ EXPORT_SYMBOL_GPL(irq_to_gpio);
.startup = jz_gpio_irq_startup, \ .startup = jz_gpio_irq_startup, \
.shutdown = jz_gpio_irq_shutdown, \ .shutdown = jz_gpio_irq_shutdown, \
.set_type = jz_gpio_irq_set_type, \ .set_type = jz_gpio_irq_set_type, \
.set_wake = jz_gpio_irq_set_wake, \
}, \ }, \
} }
@ -352,13 +375,37 @@ int __init jz_gpiolib_init(void)
for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) { for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) {
gpiochip_add(&chip->gpio_chip); gpiochip_add(&chip->gpio_chip);
set_irq_chained_handler(JZ_IRQ_INTC_GPIO(i), jz_gpio_irq_demux_handler); chip->irq = JZ_IRQ_INTC_GPIO(i);
set_irq_chained_handler(chip->irq, jz_gpio_irq_demux_handler);
for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio; for (irq = chip->irq_base; irq < chip->irq_base + chip->gpio_chip.ngpio;
++irq) ++irq) {
set_irq_chip_and_handler(irq, &chip->irq_chip, handle_level_irq); set_irq_chip_and_handler(irq, &chip->irq_chip, handle_level_irq);
set_irq_chip_data(irq, chip);
}
} }
printk("JZ GPIO initalized\n"); printk("JZ GPIO initalized\n");
return 0; return 0;
} }
void jz_gpiolib_suspend(void)
{
struct jz_gpio_chip *chip = jz_gpio_chips;
int i, gpio;
for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) {
gpio = chip->gpio_chip.base;
chip->saved[0] = readl(GPIO_TO_MASK_REG(gpio));
writel(~(chip->wakeup), GPIO_TO_MASK_SET_REG(gpio));
}
}
/* TODO: Use sysdev */
void jz_gpiolib_resume(void)
{
struct jz_gpio_chip *chip = jz_gpio_chips;
int i, gpio;
for (i = 0; i < ARRAY_SIZE(jz_gpio_chips); ++i, ++chip) {
writel(~(chip->saved[0]), GPIO_TO_MASK_CLEAR_REG(chip->gpio_chip.base));
}
}

26
target/linux/xburst/files-2.6.31/arch/mips/jz4740/irq.c
View File

@ -36,6 +36,8 @@
#include <asm/irq_cpu.h> #include <asm/irq_cpu.h>
static void __iomem *jz_intc_base; static void __iomem *jz_intc_base;
static uint32_t jz_intc_wakeup;
static uint32_t jz_intc_saved;
#define JZ_REG_BASE_INTC 0x10001000 #define JZ_REG_BASE_INTC 0x10001000
@ -69,12 +71,23 @@ static void intc_irq_end(unsigned int irq)
} }
} }
static int intc_irq_set_wake(unsigned int irq, unsigned int on)
{
if (on)
jz_intc_wakeup |= IRQ_BIT(irq);
else
jz_intc_wakeup &= ~IRQ_BIT(irq);
return 0;
}
static struct irq_chip intc_irq_type = { static struct irq_chip intc_irq_type = {
.name = "INTC", .name = "INTC",
.mask = intc_irq_mask, .mask = intc_irq_mask,
.unmask = intc_irq_unmask, .unmask = intc_irq_unmask,
.ack = intc_irq_ack, .ack = intc_irq_ack,
.end = intc_irq_end, .end = intc_irq_end,
.set_wake = intc_irq_set_wake,
}; };
static irqreturn_t jz4740_cascade(int irq, void *data) static irqreturn_t jz4740_cascade(int irq, void *data)
@ -120,3 +133,16 @@ asmlinkage void plat_irq_dispatch(void)
else else
spurious_interrupt(); spurious_interrupt();
} }
/* TODO: Use sysdev */
void jz4740_intc_suspend(void)
{
jz_intc_saved = readl(jz_intc_base + JZ_REG_INTC_MASK);
printk("intc wakeup: %d\n", jz_intc_wakeup);
writel(~jz_intc_wakeup, jz_intc_base + JZ_REG_INTC_SET_MASK);
}
void jz4740_intc_resume(void)
{
writel(~jz_intc_saved, jz_intc_base + JZ_REG_INTC_CLEAR_MASK);
}

339
target/linux/xburst/files-2.6.31/arch/mips/jz4740/pm.c
View File

@ -23,227 +23,21 @@
#include <linux/init.h> #include <linux/init.h>
#include <linux/pm.h> #include <linux/pm.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/sysctl.h> #include <linux/sysctl.h>
#include <linux/suspend.h> #include <linux/suspend.h>
#include <asm/cacheops.h>
#include <asm/jzsoc.h> #include <asm/jzsoc.h>
#undef DEBUG extern void jz4740_intc_suspend(void);
//#define DEBUG extern void jz4740_intc_resume(void);
#ifdef DEBUG extern void jz_gpiolib_suspend(void);
#define dprintk(x...) printk(x) extern void jz_gpiolib_resume(void);
#else
#define dprintk(x...)
#endif
#define GPIO_WAKEUP 125 /* set SW7(GPIO 125) as WAKEUP key */ static int jz_pm_enter(suspend_state_t state)
/*
* __gpio_as_sleep set all pins to pull-disable, and set all pins as input
* except sdram, nand flash pins and the pins which can be used as CS1_N
* to CS4_N for chip select.
*/
#define __gpio_as_sleep() \
do { \
REG_GPIO_PXFUNC(1) = ~0x9ff9ffff; \
REG_GPIO_PXSELC(1) = ~0x9ff9ffff; \
REG_GPIO_PXDIRC(1) = ~0x9ff9ffff; \
REG_GPIO_PXPES(1) = 0xffffffff; \
REG_GPIO_PXFUNC(2) = ~0x37000000; \
REG_GPIO_PXSELC(2) = ~0x37000000; \
REG_GPIO_PXDIRC(2) = ~0x37000000; \
REG_GPIO_PXPES(2) = 0xffffffff; \
REG_GPIO_PXFUNC(3) = 0xffffffff; \
REG_GPIO_PXSELC(3) = 0xffffffff; \
REG_GPIO_PXDIRC(3) = 0xffffffff; \
REG_GPIO_PXPES(3) = 0xffffffff; \
} while (0)
static int jz_pm_do_hibernate(void)
{
/* Mask all interrupts */
REG_INTC_IMSR = 0xffffffff;
/*
* RTC Wakeup or 1Hz interrupt can be enabled or disabled
* through RTC driver's ioctl (linux/driver/char/rtc_jz.c).
*/
/* Set minimum wakeup_n pin low-level assertion time for wakeup: 100ms */
while (!(REG_RTC_RCR & RTC_RCR_WRDY));
REG_RTC_HWFCR = (100 << RTC_HWFCR_BIT);
/* Set reset pin low-level assertion time after wakeup: must > 60ms */
while (!(REG_RTC_RCR & RTC_RCR_WRDY));
REG_RTC_HRCR = (60 << RTC_HRCR_BIT); /* 60 ms */
/* Scratch pad register to be reserved */
while (!(REG_RTC_RCR & RTC_RCR_WRDY));
REG_RTC_HSPR = 0x12345678;
/* clear wakeup status register */
while (!(REG_RTC_RCR & RTC_RCR_WRDY));
REG_RTC_HWRSR = 0x0;
/* Put CPU to power down mode */
while (!(REG_RTC_RCR & RTC_RCR_WRDY));
REG_RTC_HCR = RTC_HCR_PD;
while (!(REG_RTC_RCR & RTC_RCR_WRDY));
while(1);
/* We can't get here */
return 0;
}
/* NOTES:
* 1: Pins that are floated (NC) should be set as input and pull-enable.
* 2: Pins that are pull-up or pull-down by outside should be set as input
* and pull-disable.
* 3: Pins that are connected to a chip except sdram and nand flash
* should be set as input and pull-disable, too.
*/
static void jz_board_do_sleep(unsigned long *ptr)
{
unsigned char i;
/* Print messages of GPIO registers for debug */
for(i=0;i<4;i++) {
dprintk("run dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
}
/* Save GPIO registers */
for(i = 1; i < 4; i++) {
*ptr++ = REG_GPIO_PXFUN(i);
*ptr++ = REG_GPIO_PXSEL(i);
*ptr++ = REG_GPIO_PXDIR(i);
*ptr++ = REG_GPIO_PXPE(i);
*ptr++ = REG_GPIO_PXIM(i);
*ptr++ = REG_GPIO_PXDAT(i);
*ptr++ = REG_GPIO_PXTRG(i);
}
/*
* Set all pins to pull-disable, and set all pins as input except
* sdram, nand flash pins and the pins which can be used as CS1_N
* to CS4_N for chip select.
*/
__gpio_as_sleep();
/*
* Set proper status for GPB25 to GPB28 which can be used as CS1_N to CS4_N.
* Keep the pins' function used for chip select(CS) here according to your
* system to avoid chip select crashing with sdram when resuming from sleep mode.
*/
#if defined(CONFIG_JZ4740_PAVO)
/* GPB25/CS1_N is used as chip select for nand flash, shouldn't be change. */
/* GPB26/CS2_N is connected to nand flash, needn't be changed. */
/* GPB27/CS3_N is used as EXT_INT for CS8900 on debug board, it should be set as input.*/
__gpio_as_input(32+27);
/* GPB28/CS4_N is used as cs8900's chip select, shouldn't be changed. */
#endif
/*
* Enable pull for NC pins here according to your system
*/
#if defined(CONFIG_JZ4740_PAVO)
/* GPB30-27 <-> J1: WE_N RD_N CS4_N EXT_INT */
for(i=27;i<31;i++) {
__gpio_enable_pull(32+i);
}
/* GPC27<-> WAIT_N */
__gpio_enable_pull(32*2+27);
/* GPD16<->SD_WP; GPD13-10<->MSC_D0-3; GPD9<->MSC_CMD; GPD8<->MSC_CLK */
__gpio_enable_pull(32*3+16);
for(i=8;i<14;i++) {
__gpio_enable_pull(32*3+i);
}
#endif
/*
* If you must set some GPIOs as output to high level or low level,
* you can set them here, using:
* __gpio_as_output(n);
* __gpio_set_pin(n); or __gpio_clear_pin(n);
*/
#if defined(CONFIG_JZ4740_PAVO)
/* GPD16 which is used as AMPEN_N should be set to high to disable audio amplifier */
__gpio_set_pin(32*3+4);
#endif
#ifdef DEBUG
/* Keep uart0 function for printing debug message */
__gpio_as_uart0();
/* Print messages of GPIO registers for debug */
for(i=0;i<4;i++) {
dprintk("sleep dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
}
#endif
}
static void jz_board_do_resume(unsigned long *ptr)
{
unsigned char i;
/* Restore GPIO registers */
for(i = 1; i < 4; i++) {
REG_GPIO_PXFUNS(i) = *ptr;
REG_GPIO_PXFUNC(i) = ~(*ptr++);
REG_GPIO_PXSELS(i) = *ptr;
REG_GPIO_PXSELC(i) = ~(*ptr++);
REG_GPIO_PXDIRS(i) = *ptr;
REG_GPIO_PXDIRC(i) = ~(*ptr++);
REG_GPIO_PXPES(i) = *ptr;
REG_GPIO_PXPEC(i) = ~(*ptr++);
REG_GPIO_PXIMS(i)=*ptr;
REG_GPIO_PXIMC(i)=~(*ptr++);
REG_GPIO_PXDATS(i)=*ptr;
REG_GPIO_PXDATC(i)=~(*ptr++);
REG_GPIO_PXTRGS(i)=*ptr;
REG_GPIO_PXTRGC(i)=~(*ptr++);
}
/* Print messages of GPIO registers for debug */
for(i=0;i<4;i++) {
dprintk("resume dat:%x pin:%x fun:%x sel:%x dir:%x pull:%x msk:%x trg:%x\n", \
REG_GPIO_PXDAT(i),REG_GPIO_PXPIN(i),REG_GPIO_PXFUN(i),REG_GPIO_PXSEL(i), \
REG_GPIO_PXDIR(i),REG_GPIO_PXPE(i),REG_GPIO_PXIM(i),REG_GPIO_PXTRG(i));
}
}
static int jz_pm_do_sleep(void)
{ {
unsigned long delta; unsigned long delta;
unsigned long nfcsr = REG_EMC_NFCSR; unsigned long nfcsr = REG_EMC_NFCSR;
unsigned long scr = REG_CPM_SCR; uint32_t scr = REG_CPM_SCR;
unsigned long imr = REG_INTC_IMR; uint32_t sleep_gpio_save[7*3];
unsigned long sadc = REG_SADC_ENA;
unsigned long sleep_gpio_save[7*3];
/* Preserve current time */ /* Preserve current time */
delta = xtime.tv_sec - REG_RTC_RSR; delta = xtime.tv_sec - REG_RTC_RSR;
@ -251,45 +45,14 @@ static int jz_pm_do_sleep(void)
/* Disable nand flash */ /* Disable nand flash */
REG_EMC_NFCSR = ~0xff; REG_EMC_NFCSR = ~0xff;
/* stop sadc */
REG_SADC_ENA &= ~0x7;
while((REG_SADC_ENA & 0x7) != 0);
udelay(100); udelay(100);
/*stop udc and usb*/ /*stop udc and usb*/
REG_CPM_SCR &= ~( 1<<6 | 1<<7); REG_CPM_SCR &= ~( 1<<6 | 1<<7);
REG_CPM_SCR |= 0<<6 | 1<<7; REG_CPM_SCR |= 0<<6 | 1<<7;
/* Sleep on-board modules */ jz_gpiolib_suspend();
jz_board_do_sleep(sleep_gpio_save); jz4740_intc_suspend();
/* Mask all interrupts */
REG_INTC_IMSR = 0xffffffff;
/* Just allow following interrupts to wakeup the system.
* Note: modify this according to your system.
*/
/* enable RTC alarm */
__intc_unmask_irq(JZ_IRQ_RTC);
#if 0
/* make system wake up after n seconds by RTC alarm */
unsigned int v, n;
n = 10;
while (!__rtc_write_ready());
__rtc_enable_alarm();
while (!__rtc_write_ready());
__rtc_enable_alarm_irq();
while (!__rtc_write_ready());
v = __rtc_get_second();
while (!__rtc_write_ready());
__rtc_set_alarm_second(v+n);
#endif
/* WAKEUP key */
__gpio_as_irq_rise_edge(GPIO_WAKEUP);
__gpio_unmask_irq(GPIO_WAKEUP);
__intc_unmask_irq(JZ_IRQ_GPIO3); /* IRQ_GPIOn depends on GPIO_WAKEUP */
/* Enter SLEEP mode */ /* Enter SLEEP mode */
REG_CPM_LCR &= ~CPM_LCR_LPM_MASK; REG_CPM_LCR &= ~CPM_LCR_LPM_MASK;
@ -305,15 +68,8 @@ static int jz_pm_do_sleep(void)
/* Restore nand flash control register */ /* Restore nand flash control register */
REG_EMC_NFCSR = nfcsr; REG_EMC_NFCSR = nfcsr;
/* Restore interrupts */ jz4740_intc_resume();
REG_INTC_IMSR = imr; jz_gpiolib_resume();
REG_INTC_IMCR = ~imr;
/* Restore sadc */
REG_SADC_ENA = sadc;
/* Resume on-board modules */
jz_board_do_resume(sleep_gpio_save);
/* Restore sleep control register */ /* Restore sleep control register */
REG_CPM_SCR = scr; REG_CPM_SCR = scr;
@ -324,87 +80,18 @@ static int jz_pm_do_sleep(void)
return 0; return 0;
} }
/* Put CPU to HIBERNATE mode */
int jz_pm_hibernate(void)
{
printk("Put CPU into hibernate mode.\n");
return jz_pm_do_hibernate();
}
#ifndef CONFIG_JZ_POWEROFF
static irqreturn_t pm_irq_handler (int irq, void *dev_id)
{
return IRQ_HANDLED;
}
#endif
/* Put CPU to SLEEP mode */
int jz_pm_sleep(void)
{
int retval;
#ifndef CONFIG_JZ_POWEROFF
if ((retval = request_irq (IRQ_GPIO_0 + GPIO_WAKEUP, pm_irq_handler, IRQF_DISABLED,
"PM", NULL))) {
printk ("PM could not get IRQ for GPIO_WAKEUP\n");
return retval;
}
#endif
printk("Put CPU into sleep mode.\n");
retval = jz_pm_do_sleep();
#ifndef CONFIG_JZ_POWEROFF
free_irq (IRQ_GPIO_0 + GPIO_WAKEUP, NULL);
#endif
return retval;
}
/*
* valid states, only support standby(sleep) and mem(hibernate)
*/
static int jz_pm_valid(suspend_state_t state)
{
switch (state) {
case PM_SUSPEND_STANDBY:
case PM_SUSPEND_MEM:
return 1;
default:
return 0;
}
}
/*
* Jz CPU enter save power mode
*/
static int jz_pm_enter(suspend_state_t state)
{
if (state == PM_SUSPEND_STANDBY)
jz_pm_sleep();
else
jz_pm_hibernate();
return 0;
}
static struct platform_suspend_ops jz_pm_ops = { static struct platform_suspend_ops jz_pm_ops = {
.valid = jz_pm_valid, .valid = suspend_valid_only_mem,
.enter = jz_pm_enter, .enter = jz_pm_enter,
}; };
/* /*
* Initialize power interface * Initialize power interface
*/ */
int __init jz_pm_init(void) int __init jz_pm_init(void)
{ {
printk("Power Management for JZ\n");
suspend_set_ops(&jz_pm_ops); suspend_set_ops(&jz_pm_ops);
return 0; return 0;
} }
late_initcall(jz_pm_init);
//module_init(jz_pm_init);

3
target/linux/xburst/files-2.6.31/arch/mips/jz4740/setup.c
View File

@ -174,9 +174,6 @@ void __init plat_mem_setup(void)
_machine_restart = jz_restart; _machine_restart = jz_restart;
_machine_halt = jz_halt; _machine_halt = jz_halt;
pm_power_off = jz_power_off; pm_power_off = jz_power_off;
#ifdef CONFIG_PM
jz_pm_init();
#endif
jz_soc_setup(); jz_soc_setup();
jz_serial_setup(); jz_serial_setup();
} }