mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-12-24 21:54:36 +02:00
omap24xx: add support for 3.3
Compile tested only. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@31810 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg
parent
71f3abe21d
commit
2d3a55136a
708
target/linux/omap24xx/config-3.3
Normal file
708
target/linux/omap24xx/config-3.3
Normal file
@ -0,0 +1,708 @@
|
||||
# CONFIG_AD2S1200 is not set
|
||||
# CONFIG_AD2S1210 is not set
|
||||
# CONFIG_AD2S90 is not set
|
||||
# CONFIG_AD5064 is not set
|
||||
# CONFIG_AD5360 is not set
|
||||
# CONFIG_AD5380 is not set
|
||||
# CONFIG_AD5421 is not set
|
||||
# CONFIG_AD5446 is not set
|
||||
# CONFIG_AD5504 is not set
|
||||
# CONFIG_AD5624R_SPI is not set
|
||||
# CONFIG_AD5686 is not set
|
||||
# CONFIG_AD5764 is not set
|
||||
# CONFIG_AD5791 is not set
|
||||
# CONFIG_AD5930 is not set
|
||||
# CONFIG_AD5933 is not set
|
||||
# CONFIG_AD7150 is not set
|
||||
# CONFIG_AD7152 is not set
|
||||
# CONFIG_AD7192 is not set
|
||||
# CONFIG_AD7280 is not set
|
||||
# CONFIG_AD7291 is not set
|
||||
# CONFIG_AD7298 is not set
|
||||
# CONFIG_AD7476 is not set
|
||||
# CONFIG_AD7606 is not set
|
||||
# CONFIG_AD7746 is not set
|
||||
# CONFIG_AD7780 is not set
|
||||
# CONFIG_AD7793 is not set
|
||||
# CONFIG_AD7816 is not set
|
||||
# CONFIG_AD7887 is not set
|
||||
# CONFIG_AD799X is not set
|
||||
# CONFIG_AD9832 is not set
|
||||
# CONFIG_AD9834 is not set
|
||||
# CONFIG_AD9850 is not set
|
||||
# CONFIG_AD9852 is not set
|
||||
# CONFIG_AD9910 is not set
|
||||
# CONFIG_AD9951 is not set
|
||||
# CONFIG_ADE7753 is not set
|
||||
# CONFIG_ADE7754 is not set
|
||||
# CONFIG_ADE7758 is not set
|
||||
# CONFIG_ADE7759 is not set
|
||||
# CONFIG_ADE7854 is not set
|
||||
# CONFIG_ADIS16060 is not set
|
||||
# CONFIG_ADIS16080 is not set
|
||||
# CONFIG_ADIS16130 is not set
|
||||
CONFIG_ADIS16201=m
|
||||
CONFIG_ADIS16203=m
|
||||
CONFIG_ADIS16204=m
|
||||
# CONFIG_ADIS16209 is not set
|
||||
# CONFIG_ADIS16220 is not set
|
||||
# CONFIG_ADIS16240 is not set
|
||||
# CONFIG_ADIS16260 is not set
|
||||
# CONFIG_ADIS16400 is not set
|
||||
# CONFIG_ADT7310 is not set
|
||||
# CONFIG_ADT7316 is not set
|
||||
# CONFIG_ADT7410 is not set
|
||||
# CONFIG_ADXRS450 is not set
|
||||
CONFIG_ALIGNMENT_TRAP=y
|
||||
CONFIG_APM_EMULATION=y
|
||||
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
|
||||
CONFIG_ARCH_HAS_CPUFREQ=y
|
||||
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
|
||||
CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
|
||||
CONFIG_ARCH_NR_GPIO=0
|
||||
CONFIG_ARCH_OMAP=y
|
||||
# CONFIG_ARCH_OMAP1 is not set
|
||||
CONFIG_ARCH_OMAP2=y
|
||||
CONFIG_ARCH_OMAP2PLUS=y
|
||||
CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
|
||||
# CONFIG_ARCH_OMAP3 is not set
|
||||
# CONFIG_ARCH_OMAP4 is not set
|
||||
CONFIG_ARCH_OMAP_OTG=y
|
||||
CONFIG_ARCH_REQUIRE_GPIOLIB=y
|
||||
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
|
||||
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
# CONFIG_ARCH_USES_GETTIMEOFFSET is not set
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARM_CPU_SUSPEND=y
|
||||
# CONFIG_ARM_ERRATA_326103 is not set
|
||||
CONFIG_ARM_ERRATA_364296=y
|
||||
CONFIG_ARM_ERRATA_411920=y
|
||||
# CONFIG_ARM_EXYNOS4210_CPUFREQ is not set
|
||||
CONFIG_ARM_L1_CACHE_SHIFT=5
|
||||
CONFIG_ARM_NR_BANKS=8
|
||||
CONFIG_ARM_PATCH_PHYS_VIRT=y
|
||||
CONFIG_ARM_THUMB=y
|
||||
CONFIG_ARM_UNWIND=y
|
||||
# CONFIG_ARPD is not set
|
||||
CONFIG_ATAGS_PROC=y
|
||||
CONFIG_BCMA_POSSIBLE=y
|
||||
CONFIG_BINFMT_MISC=y
|
||||
# CONFIG_BLK_CGROUP is not set
|
||||
# CONFIG_BLK_DEV_INITRD is not set
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_RAM=y
|
||||
CONFIG_BLK_DEV_RAM_COUNT=16
|
||||
CONFIG_BLK_DEV_RAM_SIZE=4096
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BRIDGE=m
|
||||
CONFIG_BT=m
|
||||
# CONFIG_BT_HCIH4P is not set
|
||||
CONFIG_BT_HCIUART=m
|
||||
# CONFIG_BT_HCIUART_BCSP is not set
|
||||
# CONFIG_CACHE_L2X0 is not set
|
||||
CONFIG_CBUS=y
|
||||
CONFIG_CBUS_RETU=y
|
||||
CONFIG_CBUS_RETU_HEADSET=y
|
||||
CONFIG_CBUS_RETU_POWERBUTTON=y
|
||||
CONFIG_CBUS_RETU_WDT=y
|
||||
CONFIG_CBUS_TAHVO=y
|
||||
CONFIG_CBUS_TAHVO_USB=m
|
||||
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
||||
# CONFIG_CFS_BANDWIDTH is not set
|
||||
CONFIG_CGROUPS=y
|
||||
# CONFIG_CGROUP_CPUACCT is not set
|
||||
# CONFIG_CGROUP_DEBUG is not set
|
||||
# CONFIG_CGROUP_DEVICE is not set
|
||||
# CONFIG_CGROUP_FREEZER is not set
|
||||
CONFIG_CGROUP_SCHED=y
|
||||
CONFIG_CLKDEV_LOOKUP=y
|
||||
CONFIG_CLKSRC_MMIO=y
|
||||
CONFIG_CMDLINE="root=/dev/mmcblk0p1 rootfstype=ext4,ext3,ext2,squashfs,jffs2 console=tty0 console=ttyO2,115200n8 earlyprintk"
|
||||
CONFIG_CMDLINE_FORCE=y
|
||||
CONFIG_CONSOLE_TRANSLATIONS=y
|
||||
# CONFIG_CPUSETS is not set
|
||||
CONFIG_CPU_32v6=y
|
||||
CONFIG_CPU_ABRT_EV6=y
|
||||
# CONFIG_CPU_BPREDICT_DISABLE is not set
|
||||
CONFIG_CPU_CACHE_V6=y
|
||||
CONFIG_CPU_CACHE_VIPT=y
|
||||
CONFIG_CPU_COPY_V6=y
|
||||
CONFIG_CPU_CP15=y
|
||||
CONFIG_CPU_CP15_MMU=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
|
||||
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
|
||||
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
|
||||
CONFIG_CPU_FREQ_GOV_USERSPACE=y
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
|
||||
CONFIG_CPU_FREQ_TABLE=y
|
||||
CONFIG_CPU_HAS_ASID=y
|
||||
CONFIG_CPU_HAS_PMU=y
|
||||
# CONFIG_CPU_ICACHE_DISABLE is not set
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_LADDER=y
|
||||
CONFIG_CPU_IDLE_GOV_MENU=y
|
||||
CONFIG_CPU_PABRT_V6=y
|
||||
CONFIG_CPU_PM=y
|
||||
CONFIG_CPU_TLB_V6=y
|
||||
CONFIG_CPU_USE_DOMAINS=y
|
||||
CONFIG_CPU_V6=y
|
||||
CONFIG_CRC16=y
|
||||
CONFIG_CRC7=y
|
||||
CONFIG_CRC_CCITT=y
|
||||
CONFIG_CRC_ITU_T=y
|
||||
CONFIG_CRYPTO_AEAD2=y
|
||||
CONFIG_CRYPTO_AES=y
|
||||
CONFIG_CRYPTO_ALGAPI=y
|
||||
CONFIG_CRYPTO_ALGAPI2=y
|
||||
CONFIG_CRYPTO_ARC4=m
|
||||
CONFIG_CRYPTO_BLKCIPHER=m
|
||||
CONFIG_CRYPTO_BLKCIPHER2=y
|
||||
CONFIG_CRYPTO_CBC=m
|
||||
CONFIG_CRYPTO_DES=m
|
||||
CONFIG_CRYPTO_DEV_OMAP_AES=y
|
||||
CONFIG_CRYPTO_DEV_OMAP_SHAM=y
|
||||
CONFIG_CRYPTO_ECB=m
|
||||
CONFIG_CRYPTO_HASH=y
|
||||
CONFIG_CRYPTO_HASH2=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_MANAGER=m
|
||||
CONFIG_CRYPTO_MANAGER2=y
|
||||
CONFIG_CRYPTO_MD5=y
|
||||
CONFIG_CRYPTO_PCOMP2=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_SHA1=y
|
||||
CONFIG_CRYPTO_WORKQUEUE=y
|
||||
CONFIG_DEBUG_BUGVERBOSE=y
|
||||
# CONFIG_DEBUG_FS is not set
|
||||
# CONFIG_DEBUG_USER is not set
|
||||
CONFIG_DEFAULT_CFQ=y
|
||||
CONFIG_DEFAULT_IOSCHED="cfq"
|
||||
CONFIG_DEFAULT_TCP_CONG="cubic"
|
||||
CONFIG_DEVKMEM=y
|
||||
CONFIG_DEVTMPFS=y
|
||||
CONFIG_DEVTMPFS_MOUNT=y
|
||||
CONFIG_DNOTIFY=y
|
||||
CONFIG_DNS_RESOLVER=y
|
||||
CONFIG_DUMMY_CONSOLE=y
|
||||
CONFIG_ENABLE_MUST_CHECK=y
|
||||
CONFIG_EXPORTFS=m
|
||||
CONFIG_EXT4_FS=y
|
||||
CONFIG_FAIR_GROUP_SCHED=y
|
||||
CONFIG_FAT_FS=y
|
||||
CONFIG_FB=y
|
||||
CONFIG_FB_CFB_COPYAREA=y
|
||||
CONFIG_FB_CFB_FILLRECT=y
|
||||
CONFIG_FB_CFB_IMAGEBLIT=y
|
||||
CONFIG_FB_OMAP=y
|
||||
# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
|
||||
CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
|
||||
CONFIG_FB_OMAP_LCDC_BLIZZARD=y
|
||||
CONFIG_FB_OMAP_LCDC_EXTERNAL=y
|
||||
# CONFIG_FB_OMAP_LCDC_HWA742 is not set
|
||||
CONFIG_FB_OMAP_LCD_MIPID=y
|
||||
# CONFIG_FB_OMAP_MANUAL_UPDATE is not set
|
||||
# CONFIG_FB_SM7XX is not set
|
||||
# CONFIG_FB_WMT_GE_ROPS is not set
|
||||
# CONFIG_FIRMWARE_EDID is not set
|
||||
CONFIG_FIRMWARE_IN_KERNEL=y
|
||||
CONFIG_FONTS=y
|
||||
# CONFIG_FONT_10x18 is not set
|
||||
# CONFIG_FONT_6x11 is not set
|
||||
# CONFIG_FONT_7x14 is not set
|
||||
CONFIG_FONT_8x16=y
|
||||
CONFIG_FONT_8x8=y
|
||||
# CONFIG_FONT_ACORN_8x8 is not set
|
||||
# CONFIG_FONT_MINI_4x6 is not set
|
||||
# CONFIG_FONT_PEARL_8x8 is not set
|
||||
# CONFIG_FONT_SUN12x22 is not set
|
||||
# CONFIG_FONT_SUN8x16 is not set
|
||||
CONFIG_FRAMEBUFFER_CONSOLE=y
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
|
||||
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
|
||||
CONFIG_FREEZER=y
|
||||
CONFIG_FS_MBCACHE=y
|
||||
CONFIG_FS_POSIX_ACL=y
|
||||
CONFIG_GENERIC_ACL=y
|
||||
CONFIG_GENERIC_ATOMIC64=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
|
||||
CONFIG_GENERIC_GPIO=y
|
||||
CONFIG_GENERIC_IRQ_CHIP=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GPIOLIB=y
|
||||
CONFIG_GPIO_SYSFS=y
|
||||
# CONFIG_HAMRADIO is not set
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT=y
|
||||
CONFIG_HAVE_AOUT=y
|
||||
CONFIG_HAVE_ARCH_KGDB=y
|
||||
CONFIG_HAVE_ARCH_PFN_VALID=y
|
||||
CONFIG_HAVE_CLK=y
|
||||
CONFIG_HAVE_C_RECORDMCOUNT=y
|
||||
CONFIG_HAVE_DMA_API_DEBUG=y
|
||||
CONFIG_HAVE_DYNAMIC_FTRACE=y
|
||||
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
|
||||
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
|
||||
CONFIG_HAVE_FUNCTION_TRACER=y
|
||||
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
|
||||
CONFIG_HAVE_GENERIC_HARDIRQS=y
|
||||
CONFIG_HAVE_IRQ_WORK=y
|
||||
CONFIG_HAVE_KERNEL_GZIP=y
|
||||
CONFIG_HAVE_KERNEL_LZMA=y
|
||||
CONFIG_HAVE_KERNEL_LZO=y
|
||||
CONFIG_HAVE_KERNEL_XZ=y
|
||||
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
|
||||
CONFIG_HAVE_MEMBLOCK=y
|
||||
CONFIG_HAVE_MTD_OTP=y
|
||||
CONFIG_HAVE_OPROFILE=y
|
||||
CONFIG_HAVE_PERF_EVENTS=y
|
||||
CONFIG_HAVE_PROC_CPU=y
|
||||
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
|
||||
CONFIG_HAVE_SCHED_CLOCK=y
|
||||
CONFIG_HAVE_SPARSE_IRQ=y
|
||||
CONFIG_HID=y
|
||||
CONFIG_HID_APPLE=m
|
||||
CONFIG_HID_SUPPORT=y
|
||||
CONFIG_HWMON=m
|
||||
CONFIG_HW_CONSOLE=y
|
||||
CONFIG_HW_RANDOM=y
|
||||
CONFIG_HW_RANDOM_OMAP=y
|
||||
CONFIG_HZ=128
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_COMPAT=y
|
||||
CONFIG_I2C_HELPER_AUTO=y
|
||||
CONFIG_I2C_OMAP=y
|
||||
CONFIG_IIO=y
|
||||
# CONFIG_IIO_BUFFER is not set
|
||||
# CONFIG_IIO_SIMPLE_DUMMY is not set
|
||||
# CONFIG_IIO_TRIGGER is not set
|
||||
CONFIG_INET6_XFRM_MODE_BEET=m
|
||||
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
|
||||
CONFIG_INET6_XFRM_MODE_TUNNEL=m
|
||||
CONFIG_INET_DIAG=y
|
||||
CONFIG_INET_TCP_DIAG=y
|
||||
CONFIG_INET_TUNNEL=m
|
||||
# CONFIG_INLINE_READ_UNLOCK is not set
|
||||
# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
|
||||
# CONFIG_INLINE_SPIN_UNLOCK is not set
|
||||
# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
|
||||
# CONFIG_INLINE_WRITE_UNLOCK is not set
|
||||
# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
|
||||
CONFIG_INPUT=y
|
||||
# CONFIG_INPUT_APMPOWER is not set
|
||||
CONFIG_INPUT_EVDEV=y
|
||||
CONFIG_INPUT_JOYSTICK=y
|
||||
CONFIG_INPUT_KEYBOARD=y
|
||||
CONFIG_INPUT_MOUSE=y
|
||||
CONFIG_INPUT_MOUSEDEV=y
|
||||
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_X=800
|
||||
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
|
||||
CONFIG_INPUT_TABLET=y
|
||||
CONFIG_INPUT_TOUCHSCREEN=y
|
||||
CONFIG_IOSCHED_CFQ=y
|
||||
# CONFIG_IOSCHED_DEADLINE is not set
|
||||
CONFIG_IPV6=y
|
||||
CONFIG_IPV6_MIP6=m
|
||||
CONFIG_IPV6_PRIVACY=y
|
||||
CONFIG_IPV6_ROUTER_PREF=y
|
||||
CONFIG_IPV6_SIT=m
|
||||
# CONFIG_IP_ADVANCED_ROUTER is not set
|
||||
# CONFIG_IP_MROUTE is not set
|
||||
CONFIG_IR_LIRC_CODEC=m
|
||||
CONFIG_IR_MCE_KBD_DECODER=m
|
||||
CONFIG_IR_RC5_SZ_DECODER=m
|
||||
# CONFIG_IR_REDRAT3 is not set
|
||||
CONFIG_IR_SANYO_DECODER=m
|
||||
# CONFIG_ISDN is not set
|
||||
# CONFIG_ISP1301_OMAP is not set
|
||||
CONFIG_JBD2=y
|
||||
CONFIG_JFFS2_LZO=y
|
||||
CONFIG_JFFS2_ZLIB=y
|
||||
# CONFIG_JOYSTICK_A3D is not set
|
||||
# CONFIG_JOYSTICK_ADI is not set
|
||||
# CONFIG_JOYSTICK_ANALOG is not set
|
||||
# CONFIG_JOYSTICK_AS5011 is not set
|
||||
# CONFIG_JOYSTICK_COBRA is not set
|
||||
# CONFIG_JOYSTICK_GF2K is not set
|
||||
# CONFIG_JOYSTICK_GRIP is not set
|
||||
# CONFIG_JOYSTICK_GRIP_MP is not set
|
||||
# CONFIG_JOYSTICK_GUILLEMOT is not set
|
||||
# CONFIG_JOYSTICK_IFORCE is not set
|
||||
# CONFIG_JOYSTICK_INTERACT is not set
|
||||
# CONFIG_JOYSTICK_JOYDUMP is not set
|
||||
# CONFIG_JOYSTICK_MAGELLAN is not set
|
||||
# CONFIG_JOYSTICK_SIDEWINDER is not set
|
||||
# CONFIG_JOYSTICK_SPACEBALL is not set
|
||||
# CONFIG_JOYSTICK_SPACEORB is not set
|
||||
# CONFIG_JOYSTICK_STINGER is not set
|
||||
# CONFIG_JOYSTICK_TMDC is not set
|
||||
# CONFIG_JOYSTICK_TWIDJOY is not set
|
||||
# CONFIG_JOYSTICK_WARRIOR is not set
|
||||
# CONFIG_JOYSTICK_XPAD is not set
|
||||
# CONFIG_JOYSTICK_ZHENHUA is not set
|
||||
CONFIG_KALLSYMS=y
|
||||
CONFIG_KALLSYMS_ALL=y
|
||||
CONFIG_KEXEC=y
|
||||
# CONFIG_KEYBOARD_GPIO is not set
|
||||
CONFIG_KEYBOARD_LM8323=y
|
||||
# CONFIG_KEYBOARD_OMAP is not set
|
||||
CONFIG_KEYBOARD_TSC2301=y
|
||||
CONFIG_KEYS=y
|
||||
CONFIG_KTIME_SCALAR=y
|
||||
# CONFIG_KXSD9 is not set
|
||||
# CONFIG_LEDS is not set
|
||||
# CONFIG_LEDS_REGULATOR is not set
|
||||
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
|
||||
CONFIG_LEDS_TRIGGER_GPIO=y
|
||||
CONFIG_LIRC=m
|
||||
# CONFIG_LIS3L02DQ is not set
|
||||
CONFIG_LLC=m
|
||||
CONFIG_LOCKD=m
|
||||
CONFIG_LOG_BUF_SHIFT=18
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MACH_NOKIA_N800=y
|
||||
CONFIG_MACH_NOKIA_N810=y
|
||||
CONFIG_MACH_NOKIA_N810_WIMAX=y
|
||||
CONFIG_MACH_NOKIA_N8X0=y
|
||||
CONFIG_MACH_OMAP2_TUSB6010=y
|
||||
# CONFIG_MACH_OMAP_APOLLON is not set
|
||||
# CONFIG_MACH_OMAP_GENERIC is not set
|
||||
# CONFIG_MACH_OMAP_H4 is not set
|
||||
CONFIG_MACVLAN=m
|
||||
CONFIG_MAC_PARTITION=y
|
||||
# CONFIG_MAX1363 is not set
|
||||
# CONFIG_MAX517 is not set
|
||||
CONFIG_MEDIA_ATTACH=y
|
||||
CONFIG_MEDIA_SUPPORT=m
|
||||
CONFIG_MEDIA_TUNER=m
|
||||
CONFIG_MEDIA_TUNER_MC44S803=m
|
||||
CONFIG_MEDIA_TUNER_MT20XX=m
|
||||
CONFIG_MEDIA_TUNER_SIMPLE=m
|
||||
CONFIG_MEDIA_TUNER_TDA18271=m
|
||||
CONFIG_MEDIA_TUNER_TDA827X=m
|
||||
CONFIG_MEDIA_TUNER_TDA8290=m
|
||||
CONFIG_MEDIA_TUNER_TDA9887=m
|
||||
CONFIG_MEDIA_TUNER_TEA5761=m
|
||||
CONFIG_MEDIA_TUNER_TEA5767=m
|
||||
CONFIG_MEDIA_TUNER_XC2028=m
|
||||
CONFIG_MEDIA_TUNER_XC4000=m
|
||||
CONFIG_MEDIA_TUNER_XC5000=m
|
||||
CONFIG_MENELAUS=y
|
||||
# CONFIG_MFD_T7L66XB is not set
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_OMAP=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MMC_SPI=y
|
||||
CONFIG_MMC_UNSAFE_RESUME=y
|
||||
# CONFIG_MOUSE_BCM5974 is not set
|
||||
CONFIG_MOUSE_PS2=m
|
||||
# CONFIG_MOUSE_PS2_ALPS is not set
|
||||
# CONFIG_MOUSE_PS2_ELANTECH is not set
|
||||
# CONFIG_MOUSE_PS2_LOGIPS2PP is not set
|
||||
# CONFIG_MOUSE_PS2_SYNAPTICS is not set
|
||||
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
|
||||
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
|
||||
# CONFIG_MOUSE_SERIAL is not set
|
||||
# CONFIG_MOUSE_VSXXXAA is not set
|
||||
CONFIG_MSDOS_FS=y
|
||||
CONFIG_MTD_BLOCK2MTD=y
|
||||
# CONFIG_MTD_CFI is not set
|
||||
CONFIG_MTD_CMDLINE_PARTS=y
|
||||
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
|
||||
CONFIG_MTD_ONENAND=y
|
||||
# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
|
||||
# CONFIG_MTD_ONENAND_GENERIC is not set
|
||||
CONFIG_MTD_ONENAND_OMAP2=y
|
||||
CONFIG_MTD_ONENAND_OTP=y
|
||||
# CONFIG_MTD_ONENAND_SIM is not set
|
||||
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
|
||||
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
|
||||
# CONFIG_MTD_ROOTFS_SPLIT is not set
|
||||
CONFIG_MULTI_IRQ_HANDLER=y
|
||||
# CONFIG_MUSB_PIO_ONLY is not set
|
||||
CONFIG_N810BM=m
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_PER_CPU_KM=y
|
||||
# CONFIG_NETPRIO_CGROUP is not set
|
||||
# CONFIG_NET_NS is not set
|
||||
# CONFIG_NET_SCHED is not set
|
||||
CONFIG_NFSD=m
|
||||
# CONFIG_NFSD_FAULT_INJECTION is not set
|
||||
CONFIG_NFSD_V2_ACL=y
|
||||
CONFIG_NFSD_V3_ACL=y
|
||||
CONFIG_NFSD_V4=y
|
||||
CONFIG_NFS_ACL_SUPPORT=m
|
||||
CONFIG_NFS_FS=m
|
||||
CONFIG_NFS_USE_KERNEL_DNS=y
|
||||
# CONFIG_NFS_USE_LEGACY_DNS is not set
|
||||
# CONFIG_NFS_USE_NEW_IDMAPPER is not set
|
||||
CONFIG_NFS_V3_ACL=y
|
||||
CONFIG_NFS_V4=y
|
||||
CONFIG_NFS_V4_1=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NOP_USB_XCEIV=m
|
||||
CONFIG_NO_HZ=y
|
||||
# CONFIG_OMAP2_DSS is not set
|
||||
CONFIG_OMAP_32K_TIMER=y
|
||||
CONFIG_OMAP_32K_TIMER_HZ=128
|
||||
CONFIG_OMAP_BOOT_REASON=y
|
||||
CONFIG_OMAP_BOOT_TAG=y
|
||||
CONFIG_OMAP_COMPONENT_VERSION=y
|
||||
CONFIG_OMAP_DM_TIMER=y
|
||||
CONFIG_OMAP_GPIO_SWITCH=y
|
||||
CONFIG_OMAP_MBOX_FWK=y
|
||||
CONFIG_OMAP_MBOX_KFIFO_SIZE=256
|
||||
CONFIG_OMAP_MCBSP=y
|
||||
CONFIG_OMAP_MUX=y
|
||||
# CONFIG_OMAP_MUX_DEBUG is not set
|
||||
CONFIG_OMAP_MUX_WARNINGS=y
|
||||
CONFIG_OMAP_PACKAGE_ZAC=y
|
||||
CONFIG_OMAP_PM_NOOP=y
|
||||
CONFIG_OMAP_RESET_CLOCKS=y
|
||||
# CONFIG_OMAP_WATCHDOG is not set
|
||||
CONFIG_PAGEFLAGS_EXTENDED=y
|
||||
CONFIG_PAGE_OFFSET=0xC0000000
|
||||
# CONFIG_PCI_SYSCALL is not set
|
||||
CONFIG_PERF_USE_VMALLOC=y
|
||||
CONFIG_PM=y
|
||||
CONFIG_PM_CLK=y
|
||||
# CONFIG_PM_DEBUG is not set
|
||||
CONFIG_PM_RUNTIME=y
|
||||
CONFIG_PM_SLEEP=y
|
||||
CONFIG_PNFS_FILE_LAYOUT=m
|
||||
CONFIG_POSIX_MQUEUE=y
|
||||
CONFIG_POSIX_MQUEUE_SYSCTL=y
|
||||
CONFIG_PPP=m
|
||||
CONFIG_PPP_ASYNC=m
|
||||
CONFIG_PPP_BSDCOMP=m
|
||||
CONFIG_PPP_DEFLATE=m
|
||||
CONFIG_PPP_MPPE=m
|
||||
# CONFIG_PPP_MULTILINK is not set
|
||||
CONFIG_PPP_SYNC_TTY=m
|
||||
CONFIG_PREEMPT=y
|
||||
CONFIG_PREEMPT_COUNT=y
|
||||
# CONFIG_PREEMPT_NONE is not set
|
||||
CONFIG_PREEMPT_RCU=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_PROC_PAGE_MONITOR=y
|
||||
CONFIG_RCU_BOOST=y
|
||||
CONFIG_RCU_BOOST_DELAY=500
|
||||
CONFIG_RCU_BOOST_PRIO=1
|
||||
# CONFIG_RC_ATI_REMOTE is not set
|
||||
CONFIG_RC_CORE=m
|
||||
# CONFIG_RC_LOOPBACK is not set
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_I2C=m
|
||||
CONFIG_REGMAP_SPI=m
|
||||
CONFIG_REGULATOR=y
|
||||
# CONFIG_REGULATOR_AD5398 is not set
|
||||
# CONFIG_REGULATOR_DEBUG is not set
|
||||
# CONFIG_REGULATOR_DUMMY is not set
|
||||
# CONFIG_REGULATOR_ISL6271A is not set
|
||||
# CONFIG_REGULATOR_LP3971 is not set
|
||||
# CONFIG_REGULATOR_LP3972 is not set
|
||||
# CONFIG_REGULATOR_MAX1586 is not set
|
||||
# CONFIG_REGULATOR_MAX8649 is not set
|
||||
# CONFIG_REGULATOR_MAX8660 is not set
|
||||
# CONFIG_REGULATOR_MAX8952 is not set
|
||||
# CONFIG_REGULATOR_TPS65023 is not set
|
||||
# CONFIG_REGULATOR_TPS6507X is not set
|
||||
# CONFIG_REGULATOR_TPS6524X is not set
|
||||
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
|
||||
# CONFIG_RESOURCE_COUNTERS is not set
|
||||
# CONFIG_RFKILL_REGULATOR is not set
|
||||
# CONFIG_RT_GROUP_SCHED is not set
|
||||
CONFIG_SCHED_AUTOGROUP=y
|
||||
CONFIG_SCSI=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
# CONFIG_SENSORS_AK8975 is not set
|
||||
# CONFIG_SENSORS_HMC5843 is not set
|
||||
# CONFIG_SENSORS_ISL29018 is not set
|
||||
CONFIG_SENSORS_LM75=m
|
||||
CONFIG_SENSORS_TSL2563=m
|
||||
CONFIG_SERIAL_8250_NR_UARTS=4
|
||||
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
|
||||
CONFIG_SERIAL_OMAP=y
|
||||
CONFIG_SERIAL_OMAP_CONSOLE=y
|
||||
CONFIG_SERIO=y
|
||||
CONFIG_SERIO_LIBPS2=y
|
||||
CONFIG_SERIO_SERPORT=y
|
||||
# CONFIG_SLAB is not set
|
||||
CONFIG_SLHC=m
|
||||
CONFIG_SLUB=y
|
||||
CONFIG_SND=m
|
||||
CONFIG_SND_ARM=y
|
||||
# CONFIG_SND_EMU10K1_SEQ is not set
|
||||
CONFIG_SND_JACK=y
|
||||
CONFIG_SND_MIXER_OSS=m
|
||||
CONFIG_SND_OMAP_SOC=m
|
||||
CONFIG_SND_OMAP_SOC_MCBSP=m
|
||||
CONFIG_SND_OMAP_SOC_N810=m
|
||||
# CONFIG_SND_OPL3_LIB_SEQ is not set
|
||||
# CONFIG_SND_OPL4_LIB_SEQ is not set
|
||||
CONFIG_SND_PCM=m
|
||||
CONFIG_SND_PCM_OSS=m
|
||||
# CONFIG_SND_RAWMIDI_SEQ is not set
|
||||
# CONFIG_SND_SBAWE_SEQ is not set
|
||||
CONFIG_SND_SOC=m
|
||||
# CONFIG_SND_SOC_ALL_CODECS is not set
|
||||
CONFIG_SND_SOC_I2C_AND_SPI=m
|
||||
CONFIG_SND_SOC_TLV320AIC3X=m
|
||||
CONFIG_SND_SPI=y
|
||||
CONFIG_SND_SUPPORT_OLD_API=y
|
||||
CONFIG_SND_TIMER=m
|
||||
CONFIG_SOC_OMAP2420=y
|
||||
# CONFIG_SOC_OMAP2430 is not set
|
||||
CONFIG_SOUND=m
|
||||
CONFIG_SOUND_OSS_CORE=y
|
||||
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPEAKUP=m
|
||||
CONFIG_SPEAKUP_SYNTH_ACNTPC=m
|
||||
CONFIG_SPEAKUP_SYNTH_ACNTSA=m
|
||||
CONFIG_SPEAKUP_SYNTH_APOLLO=m
|
||||
CONFIG_SPEAKUP_SYNTH_AUDPTR=m
|
||||
CONFIG_SPEAKUP_SYNTH_BNS=m
|
||||
CONFIG_SPEAKUP_SYNTH_DECEXT=m
|
||||
CONFIG_SPEAKUP_SYNTH_DECPC=m
|
||||
CONFIG_SPEAKUP_SYNTH_DECTLK=m
|
||||
CONFIG_SPEAKUP_SYNTH_DTLK=m
|
||||
CONFIG_SPEAKUP_SYNTH_DUMMY=m
|
||||
CONFIG_SPEAKUP_SYNTH_KEYPC=m
|
||||
CONFIG_SPEAKUP_SYNTH_LTLK=m
|
||||
CONFIG_SPEAKUP_SYNTH_SOFT=m
|
||||
CONFIG_SPEAKUP_SYNTH_SPKOUT=m
|
||||
CONFIG_SPEAKUP_SYNTH_TXPRT=m
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_OMAP24XX=y
|
||||
CONFIG_SPI_TSC2301=y
|
||||
# CONFIG_SPI_TSC2301_AUDIO is not set
|
||||
CONFIG_STP=m
|
||||
# CONFIG_STRIP_ASM_SYMS is not set
|
||||
CONFIG_SUNRPC=m
|
||||
CONFIG_SUNRPC_BACKCHANNEL=y
|
||||
CONFIG_SUNRPC_GSS=m
|
||||
CONFIG_SUSPEND=y
|
||||
CONFIG_SUSPEND_FREEZER=y
|
||||
# CONFIG_SYN_COOKIES is not set
|
||||
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
|
||||
# CONFIG_TABLET_USB_ACECAD is not set
|
||||
# CONFIG_TABLET_USB_AIPTEK is not set
|
||||
# CONFIG_TABLET_USB_GTCO is not set
|
||||
# CONFIG_TABLET_USB_HANWANG is not set
|
||||
# CONFIG_TABLET_USB_KBTAB is not set
|
||||
# CONFIG_TABLET_USB_WACOM is not set
|
||||
# CONFIG_TCP_CONG_ADVANCED is not set
|
||||
CONFIG_TCP_CONG_CUBIC=y
|
||||
CONFIG_TINY_PREEMPT_RCU=y
|
||||
CONFIG_TMPFS_POSIX_ACL=y
|
||||
# CONFIG_TOUCHSCREEN_ATMEL_MXT is not set
|
||||
# CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set
|
||||
# CONFIG_TOUCHSCREEN_BU21013 is not set
|
||||
# CONFIG_TOUCHSCREEN_DYNAPRO is not set
|
||||
# CONFIG_TOUCHSCREEN_EGALAX is not set
|
||||
# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set
|
||||
# CONFIG_TOUCHSCREEN_MAX11801 is not set
|
||||
# CONFIG_TOUCHSCREEN_PIXCIR is not set
|
||||
# CONFIG_TOUCHSCREEN_ST1232 is not set
|
||||
CONFIG_TOUCHSCREEN_TSC2005=y
|
||||
CONFIG_TOUCHSCREEN_TSC2301=y
|
||||
# CONFIG_TOUCHSCREEN_TSC_SERIO is not set
|
||||
# CONFIG_TSL2583 is not set
|
||||
CONFIG_TUN=m
|
||||
CONFIG_UACCESS_WITH_MEMCPY=y
|
||||
CONFIG_UID16=y
|
||||
CONFIG_USB=m
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB_ARCH_HAS_XHCI is not set
|
||||
# CONFIG_USB_AUDIO is not set
|
||||
# CONFIG_USB_CDC_COMPOSITE is not set
|
||||
CONFIG_USB_COMMON=m
|
||||
# CONFIG_USB_DUMMY_HCD is not set
|
||||
CONFIG_USB_ETH=m
|
||||
# CONFIG_USB_ETH_EEM is not set
|
||||
# CONFIG_USB_ETH_RNDIS is not set
|
||||
# CONFIG_USB_FILE_STORAGE is not set
|
||||
# CONFIG_USB_FUNCTIONFS is not set
|
||||
# CONFIG_USB_FUSB300 is not set
|
||||
CONFIG_USB_GADGET=m
|
||||
# CONFIG_USB_GADGETFS is not set
|
||||
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
||||
CONFIG_USB_GADGET_DUALSPEED=y
|
||||
CONFIG_USB_GADGET_MUSB_HDRC=m
|
||||
CONFIG_USB_GADGET_VBUS_DRAW=100
|
||||
CONFIG_USB_GSPCA=m
|
||||
# CONFIG_USB_G_DBGP is not set
|
||||
# CONFIG_USB_G_HID is not set
|
||||
CONFIG_USB_G_NCM=m
|
||||
# CONFIG_USB_G_PRINTER is not set
|
||||
# CONFIG_USB_G_SERIAL is not set
|
||||
CONFIG_USB_HID=m
|
||||
# CONFIG_USB_M66592 is not set
|
||||
# CONFIG_USB_MUSB_AM35X is not set
|
||||
CONFIG_USB_MUSB_HDRC=m
|
||||
# CONFIG_USB_MUSB_OMAP2PLUS is not set
|
||||
CONFIG_USB_MUSB_TUSB6010=m
|
||||
# CONFIG_USB_MV_UDC is not set
|
||||
# CONFIG_USB_NET2272 is not set
|
||||
CONFIG_USB_NET_CDC_NCM=m
|
||||
# CONFIG_USB_OMAP is not set
|
||||
CONFIG_USB_OTG_UTILS=y
|
||||
# CONFIG_USB_PWC is not set
|
||||
# CONFIG_USB_R8A66597 is not set
|
||||
CONFIG_USB_SERIAL=m
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USB_TUSB_OMAP_DMA=y
|
||||
CONFIG_USB_USBNET=m
|
||||
# CONFIG_USB_ZERO is not set
|
||||
# CONFIG_USER_NS is not set
|
||||
# CONFIG_V4L_PLATFORM_DRIVERS is not set
|
||||
CONFIG_V4L_USB_DRIVERS=y
|
||||
CONFIG_VECTORS_BASE=0xffff0000
|
||||
CONFIG_VFAT_FS=y
|
||||
CONFIG_VFP=y
|
||||
CONFIG_VIDEO_CAPTURE_DRIVERS=y
|
||||
# CONFIG_VIDEO_CPIA2 is not set
|
||||
CONFIG_VIDEO_DEV=m
|
||||
CONFIG_VIDEO_IR_I2C=m
|
||||
CONFIG_VIDEO_MEDIA=m
|
||||
CONFIG_VIDEO_TCM825X=m
|
||||
CONFIG_VIDEO_V4L2=m
|
||||
CONFIG_VIDEO_V4L2_COMMON=m
|
||||
CONFIG_VLAN_8021Q=m
|
||||
CONFIG_VT=y
|
||||
CONFIG_VT_CONSOLE=y
|
||||
CONFIG_VT_CONSOLE_SLEEP=y
|
||||
# CONFIG_VT_HW_CONSOLE_BINDING is not set
|
||||
CONFIG_WATCHDOG_NOWAYOUT=y
|
||||
# CONFIG_WEXT_PRIV is not set
|
||||
# CONFIG_WEXT_SPY is not set
|
||||
CONFIG_XZ_DEC=y
|
||||
CONFIG_XZ_DEC_ARM=y
|
||||
CONFIG_XZ_DEC_ARMTHUMB=y
|
||||
CONFIG_XZ_DEC_BCJ=y
|
||||
# CONFIG_ZBOOT_ROM is not set
|
||||
CONFIG_ZBOOT_ROM_BSS=0x10200000
|
||||
CONFIG_ZBOOT_ROM_TEXT=0x10C08000
|
||||
CONFIG_ZONE_DMA_FLAG=0
|
||||
897
target/linux/omap24xx/patches-3.3/200-omap-platform.patch
Normal file
897
target/linux/omap24xx/patches-3.3/200-omap-platform.patch
Normal file
@ -0,0 +1,897 @@
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/plat-omap/bootreason.c
|
||||
@@ -0,0 +1,79 @@
|
||||
+/*
|
||||
+ * linux/arch/arm/plat-omap/bootreason.c
|
||||
+ *
|
||||
+ * OMAP Bootreason passing
|
||||
+ *
|
||||
+ * Copyright (c) 2004 Nokia
|
||||
+ *
|
||||
+ * Written by David Weinehall <david.weinehall@nokia.com>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify it
|
||||
+ * under the terms of the GNU General Public License as published by the
|
||||
+ * Free Software Foundation; either version 2 of the License, or (at your
|
||||
+ * option) any later version.
|
||||
+ *
|
||||
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
|
||||
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||||
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
|
||||
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||||
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||||
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||||
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
+ *
|
||||
+ * You should have received a copy of the GNU General Public License along
|
||||
+ * with this program; if not, write to the Free Software Foundation, Inc.,
|
||||
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
|
||||
+ */
|
||||
+#include <linux/proc_fs.h>
|
||||
+#include <linux/errno.h>
|
||||
+#include <plat/board.h>
|
||||
+
|
||||
+static char boot_reason[16];
|
||||
+
|
||||
+static int omap_bootreason_read_proc(char *page, char **start, off_t off,
|
||||
+ int count, int *eof, void *data)
|
||||
+{
|
||||
+ int len = 0;
|
||||
+
|
||||
+ len += sprintf(page + len, "%s\n", boot_reason);
|
||||
+
|
||||
+ *start = page + off;
|
||||
+
|
||||
+ if (len > off)
|
||||
+ len -= off;
|
||||
+ else
|
||||
+ len = 0;
|
||||
+
|
||||
+ return len < count ? len : count;
|
||||
+}
|
||||
+
|
||||
+static int __init bootreason_init(void)
|
||||
+{
|
||||
+ const struct omap_boot_reason_config *cfg;
|
||||
+ int reason_valid = 0;
|
||||
+
|
||||
+ cfg = omap_get_config(OMAP_TAG_BOOT_REASON, struct omap_boot_reason_config);
|
||||
+ if (cfg != NULL) {
|
||||
+ strncpy(boot_reason, cfg->reason_str, sizeof(cfg->reason_str));
|
||||
+ boot_reason[sizeof(cfg->reason_str)] = 0;
|
||||
+ reason_valid = 1;
|
||||
+ } else {
|
||||
+ /* Read the boot reason from the OMAP registers */
|
||||
+ }
|
||||
+
|
||||
+ if (!reason_valid)
|
||||
+ return -ENOENT;
|
||||
+
|
||||
+ printk(KERN_INFO "Bootup reason: %s\n", boot_reason);
|
||||
+
|
||||
+ if (!create_proc_read_entry("bootreason", S_IRUGO, NULL,
|
||||
+ omap_bootreason_read_proc, NULL))
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+late_initcall(bootreason_init);
|
||||
--- a/arch/arm/plat-omap/common.c
|
||||
+++ b/arch/arm/plat-omap/common.c
|
||||
@@ -24,18 +24,90 @@
|
||||
|
||||
#include <plat/omap-secure.h>
|
||||
|
||||
+#include <asm/setup.h>
|
||||
+
|
||||
|
||||
#define NO_LENGTH_CHECK 0xffffffff
|
||||
|
||||
struct omap_board_config_kernel *omap_board_config __initdata;
|
||||
int omap_board_config_size;
|
||||
|
||||
+unsigned char omap_bootloader_tag[1024];
|
||||
+int omap_bootloader_tag_len;
|
||||
+
|
||||
+/* used by omap-smp.c and board-4430sdp.c */
|
||||
+void __iomem *gic_cpu_base_addr;
|
||||
+
|
||||
+#ifdef CONFIG_OMAP_BOOT_TAG
|
||||
+
|
||||
+static int __init parse_tag_omap(const struct tag *tag)
|
||||
+{
|
||||
+ u32 size = tag->hdr.size - (sizeof(tag->hdr) >> 2);
|
||||
+
|
||||
+ size <<= 2;
|
||||
+ if (size > sizeof(omap_bootloader_tag))
|
||||
+ return -1;
|
||||
+
|
||||
+ memcpy(omap_bootloader_tag, tag->u.omap.data, size);
|
||||
+ omap_bootloader_tag_len = size;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+__tagtable(ATAG_BOARD, parse_tag_omap);
|
||||
+
|
||||
+#endif
|
||||
+
|
||||
static const void *__init get_config(u16 tag, size_t len,
|
||||
int skip, size_t *len_out)
|
||||
{
|
||||
struct omap_board_config_kernel *kinfo = NULL;
|
||||
int i;
|
||||
|
||||
+#ifdef CONFIG_OMAP_BOOT_TAG
|
||||
+ struct omap_board_config_entry *info = NULL;
|
||||
+
|
||||
+ if (omap_bootloader_tag_len > 4)
|
||||
+ info = (struct omap_board_config_entry *) omap_bootloader_tag;
|
||||
+ while (info != NULL) {
|
||||
+ u8 *next;
|
||||
+
|
||||
+ if (info->tag == tag) {
|
||||
+ if (skip == 0)
|
||||
+ break;
|
||||
+ skip--;
|
||||
+ }
|
||||
+
|
||||
+ if ((info->len & 0x03) != 0) {
|
||||
+ /* We bail out to avoid an alignment fault */
|
||||
+ printk(KERN_ERR "OMAP peripheral config: Length (%d) not word-aligned (tag %04x)\n",
|
||||
+ info->len, info->tag);
|
||||
+ return NULL;
|
||||
+ }
|
||||
+ next = (u8 *) info + sizeof(*info) + info->len;
|
||||
+ if (next >= omap_bootloader_tag + omap_bootloader_tag_len)
|
||||
+ info = NULL;
|
||||
+ else
|
||||
+ info = (struct omap_board_config_entry *) next;
|
||||
+ }
|
||||
+ if (info != NULL) {
|
||||
+ /* Check the length as a lame attempt to check for
|
||||
+ * binary inconsistency. */
|
||||
+ if (len != NO_LENGTH_CHECK) {
|
||||
+ /* Word-align len */
|
||||
+ if (len & 0x03)
|
||||
+ len = (len + 3) & ~0x03;
|
||||
+ if (info->len != len) {
|
||||
+ printk(KERN_ERR "OMAP peripheral config: Length mismatch with tag %x (want %d, got %d)\n",
|
||||
+ tag, len, info->len);
|
||||
+ return NULL;
|
||||
+ }
|
||||
+ }
|
||||
+ if (len_out != NULL)
|
||||
+ *len_out = info->len;
|
||||
+ return info->data;
|
||||
+ }
|
||||
+#endif
|
||||
/* Try to find the config from the board-specific structures
|
||||
* in the kernel. */
|
||||
for (i = 0; i < omap_board_config_size; i++) {
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/plat-omap/component-version.c
|
||||
@@ -0,0 +1,64 @@
|
||||
+/*
|
||||
+ * linux/arch/arm/plat-omap/component-version.c
|
||||
+ *
|
||||
+ * Copyright (C) 2005 Nokia Corporation
|
||||
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 as
|
||||
+ * published by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/proc_fs.h>
|
||||
+#include <plat/board.h>
|
||||
+
|
||||
+static int component_version_read_proc(char *page, char **start, off_t off,
|
||||
+ int count, int *eof, void *data)
|
||||
+{
|
||||
+ int len, i;
|
||||
+ const struct omap_version_config *ver;
|
||||
+ char *p;
|
||||
+
|
||||
+ i = 0;
|
||||
+ p = page;
|
||||
+ while ((ver = omap_get_nr_config(OMAP_TAG_VERSION_STR,
|
||||
+ struct omap_version_config, i)) != NULL) {
|
||||
+ p += sprintf(p, "%-12s%s\n", ver->component, ver->version);
|
||||
+ i++;
|
||||
+ }
|
||||
+
|
||||
+ len = (p - page) - off;
|
||||
+ if (len < 0)
|
||||
+ len = 0;
|
||||
+
|
||||
+ *eof = (len <= count) ? 1 : 0;
|
||||
+ *start = page + off;
|
||||
+
|
||||
+ return len;
|
||||
+}
|
||||
+
|
||||
+static int __init component_version_init(void)
|
||||
+{
|
||||
+ if (omap_get_config(OMAP_TAG_VERSION_STR, struct omap_version_config) == NULL)
|
||||
+ return -ENODEV;
|
||||
+ if (!create_proc_read_entry("component_version", S_IRUGO, NULL,
|
||||
+ component_version_read_proc, NULL))
|
||||
+ return -ENOMEM;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void __exit component_version_exit(void)
|
||||
+{
|
||||
+ remove_proc_entry("component_version", NULL);
|
||||
+}
|
||||
+
|
||||
+late_initcall(component_version_init);
|
||||
+module_exit(component_version_exit);
|
||||
+
|
||||
+MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>");
|
||||
+MODULE_DESCRIPTION("Component version driver");
|
||||
+MODULE_LICENSE("GPL");
|
||||
--- a/arch/arm/plat-omap/Kconfig
|
||||
+++ b/arch/arm/plat-omap/Kconfig
|
||||
@@ -84,6 +84,38 @@ config OMAP_RESET_CLOCKS
|
||||
probably do not want this option enabled until your
|
||||
device drivers work properly.
|
||||
|
||||
+config OMAP_BOOT_TAG
|
||||
+ bool "OMAP bootloader information passing"
|
||||
+ depends on ARCH_OMAP
|
||||
+ default n
|
||||
+ help
|
||||
+ Say Y, if you have a bootloader which passes information
|
||||
+ about your board and its peripheral configuration.
|
||||
+
|
||||
+config OMAP_BOOT_REASON
|
||||
+ bool "Support for boot reason"
|
||||
+ depends on OMAP_BOOT_TAG
|
||||
+ default n
|
||||
+ help
|
||||
+ Say Y, if you want to have a procfs entry for reading the boot
|
||||
+ reason in user-space.
|
||||
+
|
||||
+config OMAP_COMPONENT_VERSION
|
||||
+ bool "Support for component version display"
|
||||
+ depends on OMAP_BOOT_TAG && PROC_FS
|
||||
+ default n
|
||||
+ help
|
||||
+ Say Y, if you want to have a procfs entry for reading component
|
||||
+ versions (supplied by the bootloader) in user-space.
|
||||
+
|
||||
+config OMAP_GPIO_SWITCH
|
||||
+ bool "GPIO switch support"
|
||||
+ help
|
||||
+ Say Y, if you want to have support for reporting of GPIO
|
||||
+ switches (e.g. cover switches) via sysfs. Your bootloader has
|
||||
+ to provide information about the switches to the kernel via the
|
||||
+ ATAG_BOARD mechanism if they're not defined by the board config.
|
||||
+
|
||||
config OMAP_MUX
|
||||
bool "OMAP multiplexing support"
|
||||
depends on ARCH_OMAP
|
||||
--- a/arch/arm/plat-omap/Makefile
|
||||
+++ b/arch/arm/plat-omap/Makefile
|
||||
@@ -20,6 +20,9 @@ obj-$(CONFIG_ARCH_OMAP4) += omap_device.
|
||||
obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
|
||||
|
||||
obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o
|
||||
+obj-$(CONFIG_OMAP_BOOT_REASON) += bootreason.o
|
||||
+obj-$(CONFIG_OMAP_COMPONENT_VERSION) += component-version.o
|
||||
+obj-$(CONFIG_OMAP_GPIO_SWITCH) += gpio-switch.o
|
||||
obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o
|
||||
obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o
|
||||
i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o
|
||||
--- a/arch/arm/include/asm/setup.h
|
||||
+++ b/arch/arm/include/asm/setup.h
|
||||
@@ -136,6 +136,13 @@ struct tag_acorn {
|
||||
__u8 adfsdrives;
|
||||
};
|
||||
|
||||
+/* TI OMAP specific information */
|
||||
+#define ATAG_BOARD 0x414f4d50
|
||||
+
|
||||
+struct tag_omap {
|
||||
+ u8 data[0];
|
||||
+};
|
||||
+
|
||||
/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
|
||||
#define ATAG_MEMCLK 0x41000402
|
||||
|
||||
@@ -162,6 +169,11 @@ struct tag {
|
||||
struct tag_acorn acorn;
|
||||
|
||||
/*
|
||||
+ * OMAP specific
|
||||
+ */
|
||||
+ struct tag_omap omap;
|
||||
+
|
||||
+ /*
|
||||
* DC21285 specific
|
||||
*/
|
||||
struct tag_memclk memclk;
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/plat-omap/gpio-switch.c
|
||||
@@ -0,0 +1,554 @@
|
||||
+/*
|
||||
+ * linux/arch/arm/plat-omap/gpio-switch.c
|
||||
+ *
|
||||
+ * Copyright (C) 2004-2006 Nokia Corporation
|
||||
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
|
||||
+ * and Paul Mundt <paul.mundt@nokia.com>
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 as
|
||||
+ * published by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/sched.h>
|
||||
+#include <linux/init.h>
|
||||
+#include <linux/list.h>
|
||||
+#include <linux/irq.h>
|
||||
+#include <linux/interrupt.h>
|
||||
+#include <linux/module.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/timer.h>
|
||||
+#include <linux/err.h>
|
||||
+#include <linux/slab.h>
|
||||
+#include <linux/gpio.h>
|
||||
+#include <plat/hardware.h>
|
||||
+#include <plat/irqs.h>
|
||||
+#include <plat/mux.h>
|
||||
+#include <plat/board.h>
|
||||
+#include <plat/gpio-switch.h>
|
||||
+
|
||||
+struct gpio_switch {
|
||||
+ char name[14];
|
||||
+ u16 gpio;
|
||||
+ unsigned flags:4;
|
||||
+ unsigned type:4;
|
||||
+ unsigned state:1;
|
||||
+ unsigned both_edges:1;
|
||||
+
|
||||
+ u16 debounce_rising;
|
||||
+ u16 debounce_falling;
|
||||
+
|
||||
+ void (* notify)(void *data, int state);
|
||||
+ void *notify_data;
|
||||
+
|
||||
+ struct work_struct work;
|
||||
+ struct timer_list timer;
|
||||
+ struct platform_device pdev;
|
||||
+
|
||||
+ struct list_head node;
|
||||
+};
|
||||
+
|
||||
+static LIST_HEAD(gpio_switches);
|
||||
+static struct platform_device *gpio_sw_platform_dev;
|
||||
+static struct platform_driver gpio_sw_driver;
|
||||
+
|
||||
+static const struct omap_gpio_switch *board_gpio_sw_table;
|
||||
+static int board_gpio_sw_count;
|
||||
+
|
||||
+static const char *cover_str[2] = { "open", "closed" };
|
||||
+static const char *connection_str[2] = { "disconnected", "connected" };
|
||||
+static const char *activity_str[2] = { "inactive", "active" };
|
||||
+
|
||||
+/*
|
||||
+ * GPIO switch state default debounce delay in ms
|
||||
+ */
|
||||
+#define OMAP_GPIO_SW_DEFAULT_DEBOUNCE 10
|
||||
+
|
||||
+static const char **get_sw_str(struct gpio_switch *sw)
|
||||
+{
|
||||
+ switch (sw->type) {
|
||||
+ case OMAP_GPIO_SWITCH_TYPE_COVER:
|
||||
+ return cover_str;
|
||||
+ case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
|
||||
+ return connection_str;
|
||||
+ case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
|
||||
+ return activity_str;
|
||||
+ default:
|
||||
+ BUG();
|
||||
+ return NULL;
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static const char *get_sw_type(struct gpio_switch *sw)
|
||||
+{
|
||||
+ switch (sw->type) {
|
||||
+ case OMAP_GPIO_SWITCH_TYPE_COVER:
|
||||
+ return "cover";
|
||||
+ case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
|
||||
+ return "connection";
|
||||
+ case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
|
||||
+ return "activity";
|
||||
+ default:
|
||||
+ BUG();
|
||||
+ return NULL;
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static void print_sw_state(struct gpio_switch *sw, int state)
|
||||
+{
|
||||
+ const char **str;
|
||||
+
|
||||
+ str = get_sw_str(sw);
|
||||
+ if (str != NULL)
|
||||
+ printk(KERN_INFO "%s (GPIO %d) is now %s\n", sw->name, sw->gpio, str[state]);
|
||||
+}
|
||||
+
|
||||
+static int gpio_sw_get_state(struct gpio_switch *sw)
|
||||
+{
|
||||
+ int state;
|
||||
+
|
||||
+ state = gpio_get_value(sw->gpio);
|
||||
+ if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
|
||||
+ state = !state;
|
||||
+
|
||||
+ return state;
|
||||
+}
|
||||
+
|
||||
+static ssize_t gpio_sw_state_store(struct device *dev,
|
||||
+ struct device_attribute *attr,
|
||||
+ const char *buf,
|
||||
+ size_t count)
|
||||
+{
|
||||
+ struct gpio_switch *sw = dev_get_drvdata(dev);
|
||||
+ const char **str;
|
||||
+ char state[16];
|
||||
+ int enable;
|
||||
+
|
||||
+ if (!(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT))
|
||||
+ return -EPERM;
|
||||
+
|
||||
+ if (sscanf(buf, "%15s", state) != 1)
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ str = get_sw_str(sw);
|
||||
+ if (strcmp(state, str[0]) == 0)
|
||||
+ sw->state = enable = 0;
|
||||
+ else if (strcmp(state, str[1]) == 0)
|
||||
+ sw->state = enable = 1;
|
||||
+ else
|
||||
+ return -EINVAL;
|
||||
+
|
||||
+ if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
|
||||
+ enable = !enable;
|
||||
+ gpio_set_value(sw->gpio, enable);
|
||||
+
|
||||
+ return count;
|
||||
+}
|
||||
+
|
||||
+static ssize_t gpio_sw_state_show(struct device *dev,
|
||||
+ struct device_attribute *attr,
|
||||
+ char *buf)
|
||||
+{
|
||||
+ struct gpio_switch *sw = dev_get_drvdata(dev);
|
||||
+ const char **str;
|
||||
+
|
||||
+ str = get_sw_str(sw);
|
||||
+ return sprintf(buf, "%s\n", str[sw->state]);
|
||||
+}
|
||||
+
|
||||
+static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, gpio_sw_state_show,
|
||||
+ gpio_sw_state_store);
|
||||
+
|
||||
+static ssize_t gpio_sw_type_show(struct device *dev,
|
||||
+ struct device_attribute *attr,
|
||||
+ char *buf)
|
||||
+{
|
||||
+ struct gpio_switch *sw = dev_get_drvdata(dev);
|
||||
+
|
||||
+ return sprintf(buf, "%s\n", get_sw_type(sw));
|
||||
+}
|
||||
+
|
||||
+static DEVICE_ATTR(type, S_IRUGO, gpio_sw_type_show, NULL);
|
||||
+
|
||||
+static ssize_t gpio_sw_direction_show(struct device *dev,
|
||||
+ struct device_attribute *attr,
|
||||
+ char *buf)
|
||||
+{
|
||||
+ struct gpio_switch *sw = dev_get_drvdata(dev);
|
||||
+ int is_output;
|
||||
+
|
||||
+ is_output = sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT;
|
||||
+ return sprintf(buf, "%s\n", is_output ? "output" : "input");
|
||||
+}
|
||||
+
|
||||
+static DEVICE_ATTR(direction, S_IRUGO, gpio_sw_direction_show, NULL);
|
||||
+
|
||||
+
|
||||
+static irqreturn_t gpio_sw_irq_handler(int irq, void *arg)
|
||||
+{
|
||||
+ struct gpio_switch *sw = arg;
|
||||
+ unsigned long timeout;
|
||||
+ int state;
|
||||
+
|
||||
+ if (!sw->both_edges) {
|
||||
+ if (gpio_get_value(sw->gpio))
|
||||
+ irq_set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_FALLING);
|
||||
+ else
|
||||
+ irq_set_irq_type(OMAP_GPIO_IRQ(sw->gpio), IRQ_TYPE_EDGE_RISING);
|
||||
+ }
|
||||
+
|
||||
+ state = gpio_sw_get_state(sw);
|
||||
+ if (sw->state == state)
|
||||
+ return IRQ_HANDLED;
|
||||
+
|
||||
+ if (state)
|
||||
+ timeout = sw->debounce_rising;
|
||||
+ else
|
||||
+ timeout = sw->debounce_falling;
|
||||
+ if (!timeout)
|
||||
+ schedule_work(&sw->work);
|
||||
+ else
|
||||
+ mod_timer(&sw->timer, jiffies + msecs_to_jiffies(timeout));
|
||||
+
|
||||
+ return IRQ_HANDLED;
|
||||
+}
|
||||
+
|
||||
+static void gpio_sw_timer(unsigned long arg)
|
||||
+{
|
||||
+ struct gpio_switch *sw = (struct gpio_switch *) arg;
|
||||
+
|
||||
+ schedule_work(&sw->work);
|
||||
+}
|
||||
+
|
||||
+static void gpio_sw_handler(struct work_struct *work)
|
||||
+{
|
||||
+ struct gpio_switch *sw = container_of(work, struct gpio_switch, work);
|
||||
+ int state;
|
||||
+
|
||||
+ state = gpio_sw_get_state(sw);
|
||||
+ if (sw->state == state)
|
||||
+ return;
|
||||
+
|
||||
+ sw->state = state;
|
||||
+ if (sw->notify != NULL)
|
||||
+ sw->notify(sw->notify_data, state);
|
||||
+ sysfs_notify(&sw->pdev.dev.kobj, NULL, "state");
|
||||
+ print_sw_state(sw, state);
|
||||
+}
|
||||
+
|
||||
+static int __init can_do_both_edges(struct gpio_switch *sw)
|
||||
+{
|
||||
+ if (!cpu_class_is_omap1())
|
||||
+ return 1;
|
||||
+ if (OMAP_GPIO_IS_MPUIO(sw->gpio))
|
||||
+ return 0;
|
||||
+ else
|
||||
+ return 1;
|
||||
+}
|
||||
+
|
||||
+static void gpio_sw_release(struct device *dev)
|
||||
+{
|
||||
+}
|
||||
+
|
||||
+static int __init new_switch(struct gpio_switch *sw)
|
||||
+{
|
||||
+ int r, direction, trigger;
|
||||
+
|
||||
+ switch (sw->type) {
|
||||
+ case OMAP_GPIO_SWITCH_TYPE_COVER:
|
||||
+ case OMAP_GPIO_SWITCH_TYPE_CONNECTION:
|
||||
+ case OMAP_GPIO_SWITCH_TYPE_ACTIVITY:
|
||||
+ break;
|
||||
+ default:
|
||||
+ printk(KERN_ERR "invalid GPIO switch type: %d\n", sw->type);
|
||||
+ return -EINVAL;
|
||||
+ }
|
||||
+
|
||||
+ sw->pdev.name = sw->name;
|
||||
+ sw->pdev.id = -1;
|
||||
+
|
||||
+ sw->pdev.dev.parent = &gpio_sw_platform_dev->dev;
|
||||
+ sw->pdev.dev.driver = &gpio_sw_driver.driver;
|
||||
+ sw->pdev.dev.release = gpio_sw_release;
|
||||
+
|
||||
+ r = platform_device_register(&sw->pdev);
|
||||
+ if (r) {
|
||||
+ printk(KERN_ERR "gpio-switch: platform device registration "
|
||||
+ "failed for %s", sw->name);
|
||||
+ return r;
|
||||
+ }
|
||||
+ dev_set_drvdata(&sw->pdev.dev, sw);
|
||||
+
|
||||
+ r = gpio_request(sw->gpio, "gpio-switch");
|
||||
+ if (r < 0) {
|
||||
+ platform_device_unregister(&sw->pdev);
|
||||
+ return r;
|
||||
+ }
|
||||
+
|
||||
+ /* input: 1, output: 0 */
|
||||
+ direction = !(sw->flags & OMAP_GPIO_SWITCH_FLAG_OUTPUT);
|
||||
+ if (direction)
|
||||
+ gpio_direction_input(sw->gpio);
|
||||
+ else
|
||||
+ gpio_direction_output(sw->gpio, 0);
|
||||
+
|
||||
+ sw->state = gpio_sw_get_state(sw);
|
||||
+
|
||||
+ r = 0;
|
||||
+ r |= device_create_file(&sw->pdev.dev, &dev_attr_state);
|
||||
+ r |= device_create_file(&sw->pdev.dev, &dev_attr_type);
|
||||
+ r |= device_create_file(&sw->pdev.dev, &dev_attr_direction);
|
||||
+ if (r)
|
||||
+ printk(KERN_ERR "gpio-switch: attribute file creation "
|
||||
+ "failed for %s\n", sw->name);
|
||||
+
|
||||
+ if (!direction)
|
||||
+ return 0;
|
||||
+
|
||||
+ if (can_do_both_edges(sw)) {
|
||||
+ trigger = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING;
|
||||
+ sw->both_edges = 1;
|
||||
+ } else {
|
||||
+ if (gpio_get_value(sw->gpio))
|
||||
+ trigger = IRQF_TRIGGER_FALLING;
|
||||
+ else
|
||||
+ trigger = IRQF_TRIGGER_RISING;
|
||||
+ }
|
||||
+ r = request_irq(OMAP_GPIO_IRQ(sw->gpio), gpio_sw_irq_handler,
|
||||
+ IRQF_SHARED | trigger, sw->name, sw);
|
||||
+ if (r < 0) {
|
||||
+ printk(KERN_ERR "gpio-switch: request_irq() failed "
|
||||
+ "for GPIO %d\n", sw->gpio);
|
||||
+ platform_device_unregister(&sw->pdev);
|
||||
+ gpio_free(sw->gpio);
|
||||
+ return r;
|
||||
+ }
|
||||
+
|
||||
+ INIT_WORK(&sw->work, gpio_sw_handler);
|
||||
+ init_timer(&sw->timer);
|
||||
+
|
||||
+ sw->timer.function = gpio_sw_timer;
|
||||
+ sw->timer.data = (unsigned long)sw;
|
||||
+
|
||||
+ list_add(&sw->node, &gpio_switches);
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static int __init add_atag_switches(void)
|
||||
+{
|
||||
+ const struct omap_gpio_switch_config *cfg;
|
||||
+ struct gpio_switch *sw;
|
||||
+ int i, r;
|
||||
+
|
||||
+ for (i = 0; ; i++) {
|
||||
+ cfg = omap_get_nr_config(OMAP_TAG_GPIO_SWITCH,
|
||||
+ struct omap_gpio_switch_config, i);
|
||||
+ if (cfg == NULL)
|
||||
+ break;
|
||||
+ sw = kzalloc(sizeof(*sw), GFP_KERNEL);
|
||||
+ if (sw == NULL) {
|
||||
+ printk(KERN_ERR "gpio-switch: kmalloc failed\n");
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
+ strncpy(sw->name, cfg->name, sizeof(cfg->name));
|
||||
+ sw->gpio = cfg->gpio;
|
||||
+ sw->flags = cfg->flags;
|
||||
+ sw->type = cfg->type;
|
||||
+ sw->debounce_rising = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
|
||||
+ sw->debounce_falling = OMAP_GPIO_SW_DEFAULT_DEBOUNCE;
|
||||
+ if ((r = new_switch(sw)) < 0) {
|
||||
+ kfree(sw);
|
||||
+ return r;
|
||||
+ }
|
||||
+ }
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct gpio_switch * __init find_switch(int gpio, const char *name)
|
||||
+{
|
||||
+ struct gpio_switch *sw;
|
||||
+
|
||||
+ list_for_each_entry(sw, &gpio_switches, node) {
|
||||
+ if ((gpio < 0 || sw->gpio != gpio) &&
|
||||
+ (name == NULL || strcmp(sw->name, name) != 0))
|
||||
+ continue;
|
||||
+
|
||||
+ if (gpio < 0 || name == NULL)
|
||||
+ goto no_check;
|
||||
+
|
||||
+ if (strcmp(sw->name, name) != 0)
|
||||
+ printk("gpio-switch: name mismatch for %d (%s, %s)\n",
|
||||
+ gpio, name, sw->name);
|
||||
+ else if (sw->gpio != gpio)
|
||||
+ printk("gpio-switch: GPIO mismatch for %s (%d, %d)\n",
|
||||
+ name, gpio, sw->gpio);
|
||||
+no_check:
|
||||
+ return sw;
|
||||
+ }
|
||||
+ return NULL;
|
||||
+}
|
||||
+
|
||||
+static int __init add_board_switches(void)
|
||||
+{
|
||||
+ int i;
|
||||
+
|
||||
+ for (i = 0; i < board_gpio_sw_count; i++) {
|
||||
+ const struct omap_gpio_switch *cfg;
|
||||
+ struct gpio_switch *sw;
|
||||
+ int r;
|
||||
+
|
||||
+ cfg = board_gpio_sw_table + i;
|
||||
+ if (strlen(cfg->name) > sizeof(sw->name) - 1)
|
||||
+ return -EINVAL;
|
||||
+ /* Check whether we only update an existing switch
|
||||
+ * or add a new switch. */
|
||||
+ sw = find_switch(cfg->gpio, cfg->name);
|
||||
+ if (sw != NULL) {
|
||||
+ sw->debounce_rising = cfg->debounce_rising;
|
||||
+ sw->debounce_falling = cfg->debounce_falling;
|
||||
+ sw->notify = cfg->notify;
|
||||
+ sw->notify_data = cfg->notify_data;
|
||||
+ continue;
|
||||
+ } else {
|
||||
+ if (cfg->gpio < 0 || cfg->name == NULL) {
|
||||
+ printk("gpio-switch: required switch not "
|
||||
+ "found (%d, %s)\n", cfg->gpio,
|
||||
+ cfg->name);
|
||||
+ continue;
|
||||
+ }
|
||||
+ }
|
||||
+ sw = kzalloc(sizeof(*sw), GFP_KERNEL);
|
||||
+ if (sw == NULL) {
|
||||
+ printk(KERN_ERR "gpio-switch: kmalloc failed\n");
|
||||
+ return -ENOMEM;
|
||||
+ }
|
||||
+ strlcpy(sw->name, cfg->name, sizeof(sw->name));
|
||||
+ sw->gpio = cfg->gpio;
|
||||
+ sw->flags = cfg->flags;
|
||||
+ sw->type = cfg->type;
|
||||
+ sw->debounce_rising = cfg->debounce_rising;
|
||||
+ sw->debounce_falling = cfg->debounce_falling;
|
||||
+ sw->notify = cfg->notify;
|
||||
+ sw->notify_data = cfg->notify_data;
|
||||
+ if ((r = new_switch(sw)) < 0) {
|
||||
+ kfree(sw);
|
||||
+ return r;
|
||||
+ }
|
||||
+ }
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static void gpio_sw_cleanup(void)
|
||||
+{
|
||||
+ struct gpio_switch *sw = NULL, *old = NULL;
|
||||
+
|
||||
+ list_for_each_entry(sw, &gpio_switches, node) {
|
||||
+ if (old != NULL)
|
||||
+ kfree(old);
|
||||
+ flush_scheduled_work();
|
||||
+ del_timer_sync(&sw->timer);
|
||||
+
|
||||
+ free_irq(OMAP_GPIO_IRQ(sw->gpio), sw);
|
||||
+
|
||||
+ device_remove_file(&sw->pdev.dev, &dev_attr_state);
|
||||
+ device_remove_file(&sw->pdev.dev, &dev_attr_type);
|
||||
+ device_remove_file(&sw->pdev.dev, &dev_attr_direction);
|
||||
+
|
||||
+ platform_device_unregister(&sw->pdev);
|
||||
+ gpio_free(sw->gpio);
|
||||
+ old = sw;
|
||||
+ }
|
||||
+ kfree(old);
|
||||
+}
|
||||
+
|
||||
+static void __init report_initial_state(void)
|
||||
+{
|
||||
+ struct gpio_switch *sw;
|
||||
+
|
||||
+ list_for_each_entry(sw, &gpio_switches, node) {
|
||||
+ int state;
|
||||
+
|
||||
+ state = gpio_get_value(sw->gpio);
|
||||
+ if (sw->flags & OMAP_GPIO_SWITCH_FLAG_INVERTED)
|
||||
+ state = !state;
|
||||
+ if (sw->notify != NULL)
|
||||
+ sw->notify(sw->notify_data, state);
|
||||
+ print_sw_state(sw, state);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static int gpio_sw_remove(struct platform_device *dev)
|
||||
+{
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver gpio_sw_driver = {
|
||||
+ .remove = gpio_sw_remove,
|
||||
+ .driver = {
|
||||
+ .name = "gpio-switch",
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+void __init omap_register_gpio_switches(const struct omap_gpio_switch *tbl,
|
||||
+ int count)
|
||||
+{
|
||||
+ BUG_ON(board_gpio_sw_table != NULL);
|
||||
+
|
||||
+ board_gpio_sw_table = tbl;
|
||||
+ board_gpio_sw_count = count;
|
||||
+}
|
||||
+
|
||||
+static int __init gpio_sw_init(void)
|
||||
+{
|
||||
+ int r;
|
||||
+
|
||||
+ printk(KERN_INFO "OMAP GPIO switch handler initializing\n");
|
||||
+
|
||||
+ r = platform_driver_register(&gpio_sw_driver);
|
||||
+ if (r)
|
||||
+ return r;
|
||||
+
|
||||
+ gpio_sw_platform_dev = platform_device_register_simple("gpio-switch",
|
||||
+ -1, NULL, 0);
|
||||
+ if (IS_ERR(gpio_sw_platform_dev)) {
|
||||
+ r = PTR_ERR(gpio_sw_platform_dev);
|
||||
+ goto err1;
|
||||
+ }
|
||||
+
|
||||
+ r = add_atag_switches();
|
||||
+ if (r < 0)
|
||||
+ goto err2;
|
||||
+
|
||||
+ r = add_board_switches();
|
||||
+ if (r < 0)
|
||||
+ goto err2;
|
||||
+
|
||||
+ report_initial_state();
|
||||
+
|
||||
+ return 0;
|
||||
+err2:
|
||||
+ gpio_sw_cleanup();
|
||||
+ platform_device_unregister(gpio_sw_platform_dev);
|
||||
+err1:
|
||||
+ platform_driver_unregister(&gpio_sw_driver);
|
||||
+ return r;
|
||||
+}
|
||||
+
|
||||
+static void __exit gpio_sw_exit(void)
|
||||
+{
|
||||
+ gpio_sw_cleanup();
|
||||
+ platform_device_unregister(gpio_sw_platform_dev);
|
||||
+ platform_driver_unregister(&gpio_sw_driver);
|
||||
+}
|
||||
+
|
||||
+#ifndef MODULE
|
||||
+late_initcall(gpio_sw_init);
|
||||
+#else
|
||||
+module_init(gpio_sw_init);
|
||||
+#endif
|
||||
+module_exit(gpio_sw_exit);
|
||||
+
|
||||
+MODULE_AUTHOR("Juha Yrjölä <juha.yrjola@nokia.com>, Paul Mundt <paul.mundt@nokia.com");
|
||||
+MODULE_DESCRIPTION("GPIO switch driver");
|
||||
+MODULE_LICENSE("GPL");
|
||||
--- a/arch/arm/plat-omap/include/plat/board.h
|
||||
+++ b/arch/arm/plat-omap/include/plat/board.h
|
||||
@@ -151,6 +151,14 @@ struct omap_board_config_kernel {
|
||||
const void *data;
|
||||
};
|
||||
|
||||
+struct omap_gpio_switch_config {
|
||||
+ char name[12];
|
||||
+ u16 gpio;
|
||||
+ int flags:4;
|
||||
+ int type:4;
|
||||
+ int key_code:24; /* Linux key code */
|
||||
+};
|
||||
+
|
||||
extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
|
||||
|
||||
#define omap_get_config(tag, type) \
|
||||
3463
target/linux/omap24xx/patches-3.3/250-cbus.patch
Normal file
3463
target/linux/omap24xx/patches-3.3/250-cbus.patch
Normal file
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,12 @@
|
||||
--- a/drivers/cbus/tahvo.c
|
||||
+++ b/drivers/cbus/tahvo.c
|
||||
@@ -104,7 +104,9 @@ void tahvo_write_reg(struct device *chil
|
||||
{
|
||||
struct tahvo *tahvo = dev_get_drvdata(child->parent);
|
||||
|
||||
+ mutex_lock(&tahvo->mutex);
|
||||
__tahvo_write_reg(tahvo, reg, val);
|
||||
+ mutex_unlock(&tahvo->mutex);
|
||||
}
|
||||
EXPORT_SYMBOL(tahvo_write_reg);
|
||||
|
||||
@ -0,0 +1,142 @@
|
||||
--- a/drivers/cbus/retu.c
|
||||
+++ b/drivers/cbus/retu.c
|
||||
@@ -53,9 +53,6 @@ struct retu {
|
||||
|
||||
int irq;
|
||||
|
||||
- int ack;
|
||||
- bool ack_pending;
|
||||
-
|
||||
int mask;
|
||||
bool mask_pending;
|
||||
|
||||
@@ -191,9 +188,10 @@ static irqreturn_t retu_irq_handler(int
|
||||
mutex_lock(&retu->mutex);
|
||||
idr = __retu_read_reg(retu, RETU_REG_IDR);
|
||||
imr = __retu_read_reg(retu, RETU_REG_IMR);
|
||||
+ idr &= ~imr;
|
||||
+ __retu_write_reg(retu, RETU_REG_IDR, idr);
|
||||
mutex_unlock(&retu->mutex);
|
||||
|
||||
- idr &= ~imr;
|
||||
if (!idr) {
|
||||
dev_vdbg(retu->dev, "No IRQ, spurious?\n");
|
||||
return IRQ_NONE;
|
||||
@@ -232,15 +230,6 @@ static void retu_irq_unmask(struct irq_d
|
||||
|
||||
}
|
||||
|
||||
-static void retu_irq_ack(struct irq_data *data)
|
||||
-{
|
||||
- struct retu *retu = irq_data_get_irq_chip_data(data);
|
||||
- int irq = data->irq;
|
||||
-
|
||||
- retu->ack |= (1 << (irq - retu->irq_base));
|
||||
- retu->ack_pending = true;
|
||||
-}
|
||||
-
|
||||
static void retu_bus_lock(struct irq_data *data)
|
||||
{
|
||||
struct retu *retu = irq_data_get_irq_chip_data(data);
|
||||
@@ -257,11 +246,6 @@ static void retu_bus_sync_unlock(struct
|
||||
retu->mask_pending = false;
|
||||
}
|
||||
|
||||
- if (retu->ack_pending) {
|
||||
- __retu_write_reg(retu, RETU_REG_IDR, retu->ack);
|
||||
- retu->ack_pending = false;
|
||||
- }
|
||||
-
|
||||
mutex_unlock(&retu->mutex);
|
||||
}
|
||||
|
||||
@@ -271,7 +255,6 @@ static struct irq_chip retu_irq_chip = {
|
||||
.irq_bus_sync_unlock = retu_bus_sync_unlock,
|
||||
.irq_mask = retu_irq_mask,
|
||||
.irq_unmask = retu_irq_unmask,
|
||||
- .irq_ack = retu_irq_ack,
|
||||
};
|
||||
|
||||
static inline void retu_irq_setup(int irq)
|
||||
@@ -291,8 +274,7 @@ static void retu_irq_init(struct retu *r
|
||||
|
||||
for (irq = base; irq < end; irq++) {
|
||||
irq_set_chip_data(irq, retu);
|
||||
- irq_set_chip_and_handler(irq, &retu_irq_chip,
|
||||
- handle_simple_irq);
|
||||
+ irq_set_chip(irq, &retu_irq_chip);
|
||||
irq_set_nested_thread(irq, 1);
|
||||
retu_irq_setup(irq);
|
||||
}
|
||||
--- a/drivers/cbus/tahvo.c
|
||||
+++ b/drivers/cbus/tahvo.c
|
||||
@@ -48,11 +48,9 @@ struct tahvo {
|
||||
int irq_end;
|
||||
int irq;
|
||||
|
||||
- int ack;
|
||||
int mask;
|
||||
|
||||
unsigned int mask_pending:1;
|
||||
- unsigned int ack_pending:1;
|
||||
unsigned int is_betty:1;
|
||||
};
|
||||
|
||||
@@ -138,9 +136,12 @@ static irqreturn_t tahvo_irq_handler(int
|
||||
u16 id;
|
||||
u16 im;
|
||||
|
||||
+ mutex_lock(&tahvo->mutex);
|
||||
id = __tahvo_read_reg(tahvo, TAHVO_REG_IDR);
|
||||
im = __tahvo_read_reg(tahvo, TAHVO_REG_IMR);
|
||||
id &= ~im;
|
||||
+ __tahvo_write_reg(tahvo, TAHVO_REG_IDR, id);
|
||||
+ mutex_unlock(&tahvo->mutex);
|
||||
|
||||
if (!id) {
|
||||
dev_vdbg(tahvo->dev, "No IRQ, spurious ?\n");
|
||||
@@ -177,11 +178,6 @@ static void tahvo_irq_bus_sync_unlock(st
|
||||
tahvo->mask_pending = false;
|
||||
}
|
||||
|
||||
- if (tahvo->ack_pending) {
|
||||
- __tahvo_write_reg(tahvo, TAHVO_REG_IDR, tahvo->ack);
|
||||
- tahvo->ack_pending = false;
|
||||
- }
|
||||
-
|
||||
mutex_unlock(&tahvo->mutex);
|
||||
}
|
||||
|
||||
@@ -203,22 +199,12 @@ static void tahvo_irq_unmask(struct irq_
|
||||
tahvo->mask_pending = true;
|
||||
}
|
||||
|
||||
-static void tahvo_irq_ack(struct irq_data *data)
|
||||
-{
|
||||
- struct tahvo *tahvo = irq_data_get_irq_chip_data(data);
|
||||
- int irq = data->irq;
|
||||
-
|
||||
- tahvo->ack |= (1 << (irq - tahvo->irq_base));
|
||||
- tahvo->ack_pending = true;
|
||||
-}
|
||||
-
|
||||
static struct irq_chip tahvo_irq_chip = {
|
||||
.name = "tahvo",
|
||||
.irq_bus_lock = tahvo_irq_bus_lock,
|
||||
.irq_bus_sync_unlock = tahvo_irq_bus_sync_unlock,
|
||||
.irq_mask = tahvo_irq_mask,
|
||||
.irq_unmask = tahvo_irq_unmask,
|
||||
- .irq_ack = tahvo_irq_ack,
|
||||
};
|
||||
|
||||
static inline void tahvo_irq_setup(int irq)
|
||||
@@ -238,8 +224,7 @@ static void tahvo_irq_init(struct tahvo
|
||||
|
||||
for (irq = base; irq < end; irq++) {
|
||||
irq_set_chip_data(irq, tahvo);
|
||||
- irq_set_chip_and_handler(irq, &tahvo_irq_chip,
|
||||
- handle_simple_irq);
|
||||
+ irq_set_chip(irq, &tahvo_irq_chip);
|
||||
irq_set_nested_thread(irq, 1);
|
||||
tahvo_irq_setup(irq);
|
||||
}
|
||||
@ -0,0 +1,24 @@
|
||||
--- a/drivers/cbus/retu.c
|
||||
+++ b/drivers/cbus/retu.c
|
||||
@@ -451,7 +451,8 @@ static int __devinit retu_probe(struct p
|
||||
(rev >> 4) & 0x07, rev & 0x0f);
|
||||
|
||||
/* Mask all RETU interrupts */
|
||||
- __retu_write_reg(retu, RETU_REG_IMR, 0xffff);
|
||||
+ retu->mask = 0xFFFF;
|
||||
+ __retu_write_reg(retu, RETU_REG_IMR, retu->mask);
|
||||
|
||||
ret = request_threaded_irq(retu->irq, NULL, retu_irq_handler,
|
||||
IRQF_ONESHOT, "retu", retu);
|
||||
--- a/drivers/cbus/tahvo.c
|
||||
+++ b/drivers/cbus/tahvo.c
|
||||
@@ -346,7 +346,8 @@ static int __devinit tahvo_probe(struct
|
||||
(rev >> 4) & 0x0f, rev & 0x0f);
|
||||
|
||||
/* Mask all TAHVO interrupts */
|
||||
- __tahvo_write_reg(tahvo, TAHVO_REG_IMR, 0xffff);
|
||||
+ tahvo->mask = 0xFFFF;
|
||||
+ __tahvo_write_reg(tahvo, TAHVO_REG_IMR, tahvo->mask);
|
||||
|
||||
ret = request_threaded_irq(irq, NULL, tahvo_irq_handler,
|
||||
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
||||
175
target/linux/omap24xx/patches-3.3/300-cbus-platform.patch
Normal file
175
target/linux/omap24xx/patches-3.3/300-cbus-platform.patch
Normal file
@ -0,0 +1,175 @@
|
||||
--- a/arch/arm/mach-omap2/board-n8x0.c
|
||||
+++ b/arch/arm/mach-omap2/board-n8x0.c
|
||||
@@ -15,8 +15,11 @@
|
||||
#include <linux/delay.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/init.h>
|
||||
+#include <linux/irq.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/stddef.h>
|
||||
+#include <linux/platform_device.h>
|
||||
+#include <linux/platform_data/cbus.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/usb/musb.h>
|
||||
@@ -193,6 +196,110 @@ static struct omap_onenand_platform_data
|
||||
};
|
||||
#endif
|
||||
|
||||
+#if defined(CONFIG_CBUS) || defined(CONFIG_CBUS_MODULE)
|
||||
+
|
||||
+static struct cbus_host_platform_data n8x0_cbus_data = {
|
||||
+ .clk_gpio = 66,
|
||||
+ .dat_gpio = 65,
|
||||
+ .sel_gpio = 64,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device n8x0_cbus_device = {
|
||||
+ .name = "cbus",
|
||||
+ .id = -1,
|
||||
+ .dev = {
|
||||
+ .platform_data = &n8x0_cbus_data,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct resource retu_resource[] = {
|
||||
+ {
|
||||
+ .start = -EINVAL, /* set later */
|
||||
+ .flags = IORESOURCE_IRQ,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct cbus_retu_platform_data n8x0_retu_data = {
|
||||
+ .devid = CBUS_RETU_DEVICE_ID,
|
||||
+};
|
||||
+
|
||||
+static struct platform_device retu_device = {
|
||||
+ .name = "retu",
|
||||
+ .id = -1,
|
||||
+ .resource = retu_resource,
|
||||
+ .num_resources = ARRAY_SIZE(retu_resource),
|
||||
+ .dev = {
|
||||
+ .platform_data = &n8x0_retu_data,
|
||||
+ .parent = &n8x0_cbus_device.dev,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static struct resource tahvo_resource[] = {
|
||||
+ {
|
||||
+ .start = -EINVAL, /* set later */
|
||||
+ .flags = IORESOURCE_IRQ,
|
||||
+ }
|
||||
+};
|
||||
+
|
||||
+static struct platform_device tahvo_device = {
|
||||
+ .name = "tahvo",
|
||||
+ .id = -1,
|
||||
+ .resource = tahvo_resource,
|
||||
+ .num_resources = ARRAY_SIZE(tahvo_resource),
|
||||
+ .dev = {
|
||||
+ .parent = &n8x0_cbus_device.dev,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static void __init n8x0_cbus_init(void)
|
||||
+{
|
||||
+ int ret;
|
||||
+
|
||||
+ platform_device_register(&n8x0_cbus_device);
|
||||
+
|
||||
+ ret = gpio_request(108, "RETU irq");
|
||||
+ if (ret < 0) {
|
||||
+ pr_err("retu: Unable to reserve IRQ GPIO\n");
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ ret = gpio_direction_input(108);
|
||||
+ if (ret < 0) {
|
||||
+ pr_err("retu: Unable to change gpio direction\n");
|
||||
+ gpio_free(108);
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ irq_set_irq_type(gpio_to_irq(108), IRQ_TYPE_EDGE_RISING);
|
||||
+ retu_resource[0].start = gpio_to_irq(108);
|
||||
+ platform_device_register(&retu_device);
|
||||
+
|
||||
+ ret = gpio_request(111, "TAHVO irq");
|
||||
+ if (ret) {
|
||||
+ pr_err("tahvo: Unable to reserve IRQ GPIO\n");
|
||||
+ gpio_free(108);
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ /* Set the pin as input */
|
||||
+ ret = gpio_direction_input(111);
|
||||
+ if (ret) {
|
||||
+ pr_err("tahvo: Unable to change direction\n");
|
||||
+ gpio_free(108);
|
||||
+ gpio_free(111);
|
||||
+ return;
|
||||
+ }
|
||||
+
|
||||
+ tahvo_resource[0].start = gpio_to_irq(111);
|
||||
+ platform_device_register(&tahvo_device);
|
||||
+}
|
||||
+
|
||||
+#else
|
||||
+static inline void __init n8x0_cbus_init(void)
|
||||
+{
|
||||
+}
|
||||
+#endif
|
||||
+
|
||||
#if defined(CONFIG_MENELAUS) && \
|
||||
(defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE))
|
||||
|
||||
@@ -671,6 +778,8 @@ static inline void board_serial_init(voi
|
||||
static void __init n8x0_init_machine(void)
|
||||
{
|
||||
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
|
||||
+ n8x0_cbus_init();
|
||||
+
|
||||
/* FIXME: add n810 spi devices */
|
||||
spi_register_board_info(n800_spi_board_info,
|
||||
ARRAY_SIZE(n800_spi_board_info));
|
||||
--- /dev/null
|
||||
+++ b/include/linux/platform_data/cbus.h
|
||||
@@ -0,0 +1,38 @@
|
||||
+/*
|
||||
+ * cbus.h - CBUS platform_data definition
|
||||
+ *
|
||||
+ * Copyright (C) 2004 - 2009 Nokia Corporation
|
||||
+ *
|
||||
+ * Written by Felipe Balbi <felipe.balbi@nokia.com>
|
||||
+ *
|
||||
+ * This file is subject to the terms and conditions of the GNU General
|
||||
+ * Public License. See the file "COPYING" in the main directory of this
|
||||
+ * archive for more details.
|
||||
+ *
|
||||
+ * This program is distributed in the hope that it will be useful,
|
||||
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
+ * GNU General Public License for more details.
|
||||
+ *
|
||||
+ * You should have received a copy of the GNU General Public License
|
||||
+ * along with this program; if not, write to the Free Software
|
||||
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
+ */
|
||||
+
|
||||
+#ifndef __INCLUDE_LINUX_CBUS_H
|
||||
+#define __INCLUDE_LINUX_CBUS_H
|
||||
+
|
||||
+#define CBUS_RETU_DEVICE_ID 0x01
|
||||
+#define CBUS_TAHVO_DEVICE_ID 0x02
|
||||
+
|
||||
+struct cbus_host_platform_data {
|
||||
+ int dat_gpio;
|
||||
+ int clk_gpio;
|
||||
+ int sel_gpio;
|
||||
+};
|
||||
+
|
||||
+struct cbus_retu_platform_data {
|
||||
+ int devid;
|
||||
+};
|
||||
+
|
||||
+#endif /* __INCLUDE_LINUX_CBUS_H */
|
||||
@ -0,0 +1,41 @@
|
||||
--- a/drivers/video/omap/omapfb_main.c
|
||||
+++ b/drivers/video/omap/omapfb_main.c
|
||||
@@ -420,10 +420,10 @@ static void set_fb_fix(struct fb_info *f
|
||||
fbi->screen_base = rg->vaddr;
|
||||
|
||||
if (!from_init) {
|
||||
- mutex_lock(&fbi->mm_lock);
|
||||
+ preempt_disable();
|
||||
fix->smem_start = rg->paddr;
|
||||
fix->smem_len = rg->size;
|
||||
- mutex_unlock(&fbi->mm_lock);
|
||||
+ preempt_enable();
|
||||
} else {
|
||||
fix->smem_start = rg->paddr;
|
||||
fix->smem_len = rg->size;
|
||||
@@ -933,10 +933,10 @@ static int omapfb_setup_mem(struct fb_in
|
||||
* plane memory is dealloce'd, the other
|
||||
* screen parameters in var / fix are invalid.
|
||||
*/
|
||||
- mutex_lock(&fbi->mm_lock);
|
||||
+ preempt_disable();
|
||||
fbi->fix.smem_start = 0;
|
||||
fbi->fix.smem_len = 0;
|
||||
- mutex_unlock(&fbi->mm_lock);
|
||||
+ preempt_enable();
|
||||
}
|
||||
}
|
||||
}
|
||||
--- a/drivers/video/fbmem.c
|
||||
+++ b/drivers/video/fbmem.c
|
||||
@@ -1383,8 +1383,10 @@ fb_mmap(struct file *file, struct vm_are
|
||||
}
|
||||
|
||||
/* frame buffer memory */
|
||||
+ preempt_disable();
|
||||
start = info->fix.smem_start;
|
||||
len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.smem_len);
|
||||
+ preempt_enable();
|
||||
if (off >= len) {
|
||||
/* memory mapped io */
|
||||
off -= len;
|
||||
368
target/linux/omap24xx/patches-3.3/310-n810-lcd.patch
Normal file
368
target/linux/omap24xx/patches-3.3/310-n810-lcd.patch
Normal file
@ -0,0 +1,368 @@
|
||||
--- a/arch/arm/mach-omap2/board-n8x0.c
|
||||
+++ b/arch/arm/mach-omap2/board-n8x0.c
|
||||
@@ -24,6 +24,7 @@
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/usb/musb.h>
|
||||
#include <sound/tlv320aic3x.h>
|
||||
+#include <linux/spi/tsc2005.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
@@ -43,6 +44,66 @@ static int slot1_cover_open;
|
||||
static int slot2_cover_open;
|
||||
static struct device *mmc_device;
|
||||
|
||||
+#define RX51_TSC2005_RESET_GPIO 94
|
||||
+#define RX51_TSC2005_IRQ_GPIO 106
|
||||
+
|
||||
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
|
||||
+static struct tsc2005_platform_data tsc2005_config;
|
||||
+static void rx51_tsc2005_set_reset(bool enable)
|
||||
+{
|
||||
+ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
|
||||
+}
|
||||
+
|
||||
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
|
||||
+ .turbo_mode = 0,
|
||||
+ .single_channel = 1,
|
||||
+};
|
||||
+#endif
|
||||
+
|
||||
+static void __init tsc2005_set_config(void)
|
||||
+{
|
||||
+ const struct omap_lcd_config *conf;
|
||||
+
|
||||
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
|
||||
+ if (conf != NULL) {
|
||||
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
|
||||
+ if (strcmp(conf->panel_name, "lph8923") == 0) {
|
||||
+ tsc2005_config.ts_x_plate_ohm = 180;
|
||||
+ tsc2005_config.ts_pressure_max = 2048;
|
||||
+ tsc2005_config.ts_pressure_fudge = 2;
|
||||
+ tsc2005_config.ts_x_max = 4096;
|
||||
+ tsc2005_config.ts_x_fudge = 4;
|
||||
+ tsc2005_config.ts_y_max = 4096;
|
||||
+ tsc2005_config.ts_y_fudge = 7;
|
||||
+ tsc2005_config.set_reset = rx51_tsc2005_set_reset;
|
||||
+ } else if (strcmp(conf->panel_name, "ls041y3") == 0) {
|
||||
+ tsc2005_config.ts_x_plate_ohm = 280;
|
||||
+ tsc2005_config.ts_pressure_max = 2048;
|
||||
+ tsc2005_config.ts_pressure_fudge = 2;
|
||||
+ tsc2005_config.ts_x_max = 4096;
|
||||
+ tsc2005_config.ts_x_fudge = 4;
|
||||
+ tsc2005_config.ts_y_max = 4096;
|
||||
+ tsc2005_config.ts_y_fudge = 7;
|
||||
+ tsc2005_config.set_reset = rx51_tsc2005_set_reset;
|
||||
+ } else {
|
||||
+ printk(KERN_ERR "Unknown panel type, set default "
|
||||
+ "touchscreen configuration\n");
|
||||
+ tsc2005_config.ts_x_plate_ohm = 200;
|
||||
+ }
|
||||
+#endif
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
|
||||
+ .turbo_mode = 0,
|
||||
+ .single_channel = 1,
|
||||
+};
|
||||
+
|
||||
+extern struct mipid_platform_data n8x0_mipid_platform_data;
|
||||
+
|
||||
+extern void n8x0_mipid_init(void);
|
||||
+extern void n8x0_blizzard_init(void);
|
||||
+
|
||||
#define TUSB6010_ASYNC_CS 1
|
||||
#define TUSB6010_SYNC_CS 4
|
||||
#define TUSB6010_GPIO_INT 58
|
||||
@@ -145,12 +206,29 @@ static struct omap2_mcspi_device_config
|
||||
|
||||
static struct spi_board_info n800_spi_board_info[] __initdata = {
|
||||
{
|
||||
+ .modalias = "lcd_mipid",
|
||||
+ .bus_num = 1,
|
||||
+ .chip_select = 1,
|
||||
+ .max_speed_hz = 4000000,
|
||||
+ .controller_data= &mipid_mcspi_config,
|
||||
+ .platform_data = &n8x0_mipid_platform_data,
|
||||
+ },
|
||||
+ {
|
||||
.modalias = "p54spi",
|
||||
.bus_num = 2,
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 48000000,
|
||||
.controller_data = &p54spi_mcspi_config,
|
||||
},
|
||||
+ {
|
||||
+ .modalias = "tsc2005",
|
||||
+ .bus_num = 1,
|
||||
+ .chip_select = 0,
|
||||
+ .irq = OMAP_GPIO_IRQ(RX51_TSC2005_IRQ_GPIO),
|
||||
+ .max_speed_hz = 6000000,
|
||||
+ .controller_data = &tsc2005_mcspi_config,
|
||||
+ .platform_data = &tsc2005_config,
|
||||
+ },
|
||||
};
|
||||
|
||||
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
|
||||
@@ -781,6 +859,7 @@ static void __init n8x0_init_machine(voi
|
||||
n8x0_cbus_init();
|
||||
|
||||
/* FIXME: add n810 spi devices */
|
||||
+ tsc2005_set_config();
|
||||
spi_register_board_info(n800_spi_board_info,
|
||||
ARRAY_SIZE(n800_spi_board_info));
|
||||
omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
|
||||
@@ -790,6 +869,8 @@ static void __init n8x0_init_machine(voi
|
||||
i2c_register_board_info(2, n810_i2c_board_info_2,
|
||||
ARRAY_SIZE(n810_i2c_board_info_2));
|
||||
board_serial_init();
|
||||
+ n8x0_mipid_init();
|
||||
+ n8x0_blizzard_init();
|
||||
omap_sdrc_init(NULL, NULL);
|
||||
gpmc_onenand_init(board_onenand_data);
|
||||
n8x0_mmc_init();
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/mach-omap2/board-n8x0-lcd.c
|
||||
@@ -0,0 +1,231 @@
|
||||
+/*
|
||||
+ * linux/arch/arm/mach-omap2/board-n8x0.c
|
||||
+ *
|
||||
+ * Copyright (C) 2005-2009 Nokia Corporation
|
||||
+ * Author: Juha Yrjola <juha.yrjola@nokia.com>
|
||||
+ *
|
||||
+ * Modified from mach-omap2/board-generic.c
|
||||
+ *
|
||||
+ * This program is free software; you can redistribute it and/or modify
|
||||
+ * it under the terms of the GNU General Public License version 2 as
|
||||
+ * published by the Free Software Foundation.
|
||||
+ */
|
||||
+
|
||||
+#include <linux/clk.h>
|
||||
+#include <linux/delay.h>
|
||||
+#include <linux/gpio.h>
|
||||
+#include <linux/omapfb.h>
|
||||
+
|
||||
+#include <plat/lcd_mipid.h>
|
||||
+#include <plat/blizzard.h>
|
||||
+
|
||||
+#include "../../../drivers/cbus/tahvo.h"
|
||||
+
|
||||
+
|
||||
+struct tahvo_pwm_device {
|
||||
+ struct device *dev;
|
||||
+ int tahvo_7bit_backlight;
|
||||
+};
|
||||
+
|
||||
+static struct tahvo_pwm_device *tahvo_pwm;
|
||||
+
|
||||
+static unsigned int tahvo_pwm_get_backlight_level(struct tahvo_pwm_device *pd)
|
||||
+{
|
||||
+ unsigned int mask;
|
||||
+
|
||||
+ if (pd->tahvo_7bit_backlight)
|
||||
+ mask = 0x7f;
|
||||
+ else
|
||||
+ mask = 0x0f;
|
||||
+ return tahvo_read_reg(pd->dev, TAHVO_REG_LEDPWMR) & mask;
|
||||
+}
|
||||
+
|
||||
+static unsigned int tahvo_pwm_get_max_backlight_level(struct tahvo_pwm_device *pd)
|
||||
+{
|
||||
+ if (pd->tahvo_7bit_backlight)
|
||||
+ return 0x7f;
|
||||
+ return 0x0f;
|
||||
+}
|
||||
+
|
||||
+static void tahvo_pwm_set_backlight_level(struct tahvo_pwm_device *pd, unsigned int level)
|
||||
+{
|
||||
+ unsigned int max_level;
|
||||
+
|
||||
+ max_level = tahvo_pwm_get_max_backlight_level(pd);
|
||||
+ if (level > max_level)
|
||||
+ level = max_level;
|
||||
+ tahvo_write_reg(pd->dev, TAHVO_REG_LEDPWMR, level);
|
||||
+}
|
||||
+
|
||||
+static int __init n8x0_tahvo_pwm_probe(struct platform_device *pdev)
|
||||
+{
|
||||
+ struct tahvo_pwm_device *pd;
|
||||
+ unsigned int rev, id;
|
||||
+
|
||||
+ pd = kzalloc(sizeof(*pd), GFP_KERNEL);
|
||||
+ if (WARN_ON(!pd))
|
||||
+ return -ENOMEM;
|
||||
+ pd->dev = &pdev->dev;
|
||||
+
|
||||
+ rev = tahvo_read_reg(pd->dev, TAHVO_REG_ASICR);
|
||||
+ id = (rev >> 8) & 0xff;
|
||||
+ if (id == 0x03) {
|
||||
+ if ((rev & 0xff) >= 0x50)
|
||||
+ pd->tahvo_7bit_backlight = 1;
|
||||
+ } else if (id == 0x0b)
|
||||
+ pd->tahvo_7bit_backlight = 1;
|
||||
+
|
||||
+ dev_set_drvdata(pd->dev, pd);
|
||||
+ tahvo_pwm = pd;
|
||||
+
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static struct platform_driver n8x0_tahvo_pwm_driver = {
|
||||
+ .driver = {
|
||||
+ .name = "tahvo-pwm",
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static int __init n8x0_tahvo_pwm_init(void)
|
||||
+{
|
||||
+ return platform_driver_probe(&n8x0_tahvo_pwm_driver, n8x0_tahvo_pwm_probe);
|
||||
+}
|
||||
+fs_initcall(n8x0_tahvo_pwm_init);
|
||||
+
|
||||
+static int n8x0_get_backlight_level(struct mipid_platform_data *pdata)
|
||||
+{
|
||||
+ return tahvo_pwm_get_backlight_level(tahvo_pwm);
|
||||
+}
|
||||
+
|
||||
+static int n8x0_get_max_backlight_level(struct mipid_platform_data *pdata)
|
||||
+{
|
||||
+ return tahvo_pwm_get_max_backlight_level(tahvo_pwm);
|
||||
+}
|
||||
+
|
||||
+static void n8x0_set_backlight_level(struct mipid_platform_data *pdata, int level)
|
||||
+{
|
||||
+ tahvo_pwm_set_backlight_level(tahvo_pwm, level);
|
||||
+}
|
||||
+
|
||||
+#define N8X0_BLIZZARD_POWERDOWN_GPIO 15
|
||||
+
|
||||
+// MIPID LCD Panel
|
||||
+
|
||||
+static void mipid_shutdown(struct mipid_platform_data *pdata)
|
||||
+{
|
||||
+ if (pdata->nreset_gpio != -1) {
|
||||
+ pr_info("shutdown LCD\n");
|
||||
+ gpio_set_value(pdata->nreset_gpio, 0);
|
||||
+ msleep(120);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+struct mipid_platform_data n8x0_mipid_platform_data = {
|
||||
+ .shutdown = mipid_shutdown,
|
||||
+ .get_bklight_level = n8x0_get_backlight_level,
|
||||
+ .set_bklight_level = n8x0_set_backlight_level,
|
||||
+ .get_bklight_max = n8x0_get_max_backlight_level,
|
||||
+};
|
||||
+
|
||||
+void __init n8x0_mipid_init(void)
|
||||
+{
|
||||
+ const struct omap_lcd_config *conf;
|
||||
+ int err;
|
||||
+
|
||||
+ conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
|
||||
+ if (conf != NULL) {
|
||||
+ n8x0_mipid_platform_data.nreset_gpio = conf->nreset_gpio;
|
||||
+ n8x0_mipid_platform_data.data_lines = conf->data_lines;
|
||||
+ if (conf->nreset_gpio != -1) {
|
||||
+ err = gpio_request(conf->nreset_gpio, "MIPID nreset");
|
||||
+ if (err) {
|
||||
+ printk(KERN_ERR "N8x0 MIPID failed to request nreset GPIO %d\n",
|
||||
+ conf->nreset_gpio);
|
||||
+ } else {
|
||||
+ err = gpio_direction_output(conf->nreset_gpio, 1);
|
||||
+ if (err) {
|
||||
+ printk(KERN_ERR "N8x0 MIPID failed to set nreset GPIO %d\n",
|
||||
+ conf->nreset_gpio);
|
||||
+ }
|
||||
+ }
|
||||
+ }
|
||||
+ printk(KERN_INFO "N8x0 MIPID config loaded");
|
||||
+ }
|
||||
+ else
|
||||
+ printk(KERN_INFO "N8x0 MIPID config not provided");
|
||||
+}
|
||||
+
|
||||
+
|
||||
+// Epson Blizzard LCD Controller
|
||||
+
|
||||
+static struct {
|
||||
+ struct clk *sys_ck;
|
||||
+} blizzard;
|
||||
+
|
||||
+static int blizzard_get_clocks(void)
|
||||
+{
|
||||
+ blizzard.sys_ck = clk_get(0, "osc_ck");
|
||||
+ if (IS_ERR(blizzard.sys_ck)) {
|
||||
+ printk(KERN_ERR "can't get Blizzard clock\n");
|
||||
+ return PTR_ERR(blizzard.sys_ck);
|
||||
+ }
|
||||
+ return 0;
|
||||
+}
|
||||
+
|
||||
+static unsigned long blizzard_get_clock_rate(struct device *dev)
|
||||
+{
|
||||
+ return clk_get_rate(blizzard.sys_ck);
|
||||
+}
|
||||
+
|
||||
+static void blizzard_enable_clocks(int enable)
|
||||
+{
|
||||
+ if (enable)
|
||||
+ clk_enable(blizzard.sys_ck);
|
||||
+ else
|
||||
+ clk_disable(blizzard.sys_ck);
|
||||
+}
|
||||
+
|
||||
+static void blizzard_power_up(struct device *dev)
|
||||
+{
|
||||
+ /* Vcore to 1.475V */
|
||||
+ tahvo_set_clear_reg_bits(tahvo_pwm->dev, 0x07, 0, 0xf);
|
||||
+ msleep(10);
|
||||
+
|
||||
+ blizzard_enable_clocks(1);
|
||||
+ gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
|
||||
+}
|
||||
+
|
||||
+static void blizzard_power_down(struct device *dev)
|
||||
+{
|
||||
+ gpio_set_value(N8X0_BLIZZARD_POWERDOWN_GPIO, 0);
|
||||
+ blizzard_enable_clocks(0);
|
||||
+
|
||||
+ /* Vcore to 1.005V */
|
||||
+ tahvo_set_clear_reg_bits(tahvo_pwm->dev, 0x07, 0xf, 0);
|
||||
+}
|
||||
+
|
||||
+static struct blizzard_platform_data n8x0_blizzard_data = {
|
||||
+ .power_up = blizzard_power_up,
|
||||
+ .power_down = blizzard_power_down,
|
||||
+ .get_clock_rate = blizzard_get_clock_rate,
|
||||
+ .te_connected = 1,
|
||||
+};
|
||||
+
|
||||
+void __init n8x0_blizzard_init(void)
|
||||
+{
|
||||
+ int r;
|
||||
+
|
||||
+ r = gpio_request(N8X0_BLIZZARD_POWERDOWN_GPIO, "Blizzard pd");
|
||||
+ if (r < 0)
|
||||
+ {
|
||||
+ printk(KERN_ERR "Can't get N8x0 Blizzard powerdown GPIO %d\n", N8X0_BLIZZARD_POWERDOWN_GPIO);
|
||||
+ return;
|
||||
+ }
|
||||
+ gpio_direction_output(N8X0_BLIZZARD_POWERDOWN_GPIO, 1);
|
||||
+
|
||||
+ blizzard_get_clocks();
|
||||
+ omapfb_set_ctrl_platform_data(&n8x0_blizzard_data);
|
||||
+
|
||||
+ printk(KERN_INFO "N8x0 Blizzard initialized");
|
||||
+}
|
||||
--- a/arch/arm/mach-omap2/Makefile
|
||||
+++ b/arch/arm/mach-omap2/Makefile
|
||||
@@ -205,6 +205,7 @@ obj-$(CONFIG_MACH_OMAP3EVM) += board-om
|
||||
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
|
||||
obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
|
||||
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
|
||||
+obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0-lcd.o
|
||||
obj-$(CONFIG_MACH_NOKIA_RM680) += board-rm680.o \
|
||||
sdram-nokia.o
|
||||
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
|
||||
@ -0,0 +1,30 @@
|
||||
--- a/drivers/video/omap/dispc.c
|
||||
+++ b/drivers/video/omap/dispc.c
|
||||
@@ -923,14 +923,14 @@ static int get_dss_clocks(void)
|
||||
return PTR_ERR(dispc.dss_ick);
|
||||
}
|
||||
|
||||
- dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "fck");
|
||||
+ dispc.dss1_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss1_fck");
|
||||
if (IS_ERR(dispc.dss1_fck)) {
|
||||
dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
|
||||
clk_put(dispc.dss_ick);
|
||||
return PTR_ERR(dispc.dss1_fck);
|
||||
}
|
||||
|
||||
- dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "tv_clk");
|
||||
+ dispc.dss_54m_fck = clk_get(&dispc.fbdev->dssdev->dev, "dss_54m_fck");
|
||||
if (IS_ERR(dispc.dss_54m_fck)) {
|
||||
dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
|
||||
clk_put(dispc.dss_ick);
|
||||
--- a/drivers/video/omap/rfbi.c
|
||||
+++ b/drivers/video/omap/rfbi.c
|
||||
@@ -90,7 +90,7 @@ static int rfbi_get_clocks(void)
|
||||
return PTR_ERR(rfbi.dss_ick);
|
||||
}
|
||||
|
||||
- rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "fck");
|
||||
+ rfbi.dss1_fck = clk_get(&rfbi.fbdev->dssdev->dev, "dss1_fck");
|
||||
if (IS_ERR(rfbi.dss1_fck)) {
|
||||
dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
|
||||
clk_put(rfbi.dss_ick);
|
||||
28
target/linux/omap24xx/patches-3.3/312-no-hwmod-reset.patch
Normal file
28
target/linux/omap24xx/patches-3.3/312-no-hwmod-reset.patch
Normal file
@ -0,0 +1,28 @@
|
||||
--- a/arch/arm/mach-omap2/omap_hwmod.c
|
||||
+++ b/arch/arm/mach-omap2/omap_hwmod.c
|
||||
@@ -146,6 +146,8 @@
|
||||
#include <plat/omap_hwmod.h>
|
||||
#include <plat/prcm.h>
|
||||
|
||||
+#include <asm/mach-types.h>
|
||||
+
|
||||
#include "cm2xxx_3xxx.h"
|
||||
#include "cminst44xx.h"
|
||||
#include "prm2xxx_3xxx.h"
|
||||
@@ -1769,6 +1771,16 @@ static int _setup(struct omap_hwmod *oh,
|
||||
|
||||
oh->_state = _HWMOD_STATE_INITIALIZED;
|
||||
|
||||
+ if (machine_is_nokia770() ||
|
||||
+ machine_is_nokia_n800() ||
|
||||
+ machine_is_nokia_n810() ||
|
||||
+ machine_is_nokia_n810_wimax()) {
|
||||
+ /* Nokia N-series workaround: Don't reset any hwmod. Some drivers expect
|
||||
+ * the NOLO bootloader initializations to be effective. */
|
||||
+ oh->flags |= HWMOD_INIT_NO_RESET;
|
||||
+ printk_once(KERN_INFO "Nokia N-series HWMOD_INIT_NO_RESET workaround enabled\n");
|
||||
+ }
|
||||
+
|
||||
/*
|
||||
* In the case of hwmod with hardreset that should not be
|
||||
* de-assert at boot time, we have to keep the module
|
||||
File diff suppressed because it is too large
Load Diff
194
target/linux/omap24xx/patches-3.3/320-nokia-various.patch
Normal file
194
target/linux/omap24xx/patches-3.3/320-nokia-various.patch
Normal file
@ -0,0 +1,194 @@
|
||||
--- a/arch/arm/mach-omap2/board-n8x0.c
|
||||
+++ b/arch/arm/mach-omap2/board-n8x0.c
|
||||
@@ -25,6 +25,8 @@
|
||||
#include <linux/usb/musb.h>
|
||||
#include <sound/tlv320aic3x.h>
|
||||
#include <linux/spi/tsc2005.h>
|
||||
+#include <linux/input.h>
|
||||
+#include <linux/i2c/lm8323.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
@@ -37,6 +39,7 @@
|
||||
#include <plat/onenand.h>
|
||||
#include <plat/mmc.h>
|
||||
#include <plat/serial.h>
|
||||
+#include <plat/gpio-switch.h>
|
||||
|
||||
#include "mux.h"
|
||||
|
||||
@@ -104,6 +107,152 @@ extern struct mipid_platform_data n8x0_m
|
||||
extern void n8x0_mipid_init(void);
|
||||
extern void n8x0_blizzard_init(void);
|
||||
|
||||
+/* We map the FN key as LALT to workaround an X keycode problem.
|
||||
+ * The XKB map needs to be adjusted to support this. */
|
||||
+#define MAP_FN_AS_LEFTALT
|
||||
+
|
||||
+static s16 rx44_keymap[LM8323_KEYMAP_SIZE] = {
|
||||
+ [0x01] = KEY_Q,
|
||||
+ [0x02] = KEY_K,
|
||||
+ [0x03] = KEY_O,
|
||||
+ [0x04] = KEY_P,
|
||||
+ [0x05] = KEY_BACKSPACE,
|
||||
+ [0x06] = KEY_A,
|
||||
+ [0x07] = KEY_S,
|
||||
+ [0x08] = KEY_D,
|
||||
+ [0x09] = KEY_F,
|
||||
+ [0x0a] = KEY_G,
|
||||
+ [0x0b] = KEY_H,
|
||||
+ [0x0c] = KEY_J,
|
||||
+
|
||||
+ [0x11] = KEY_W,
|
||||
+ [0x12] = KEY_F4,
|
||||
+ [0x13] = KEY_L,
|
||||
+ [0x14] = KEY_APOSTROPHE,
|
||||
+ [0x16] = KEY_Z,
|
||||
+ [0x17] = KEY_X,
|
||||
+ [0x18] = KEY_C,
|
||||
+ [0x19] = KEY_V,
|
||||
+ [0x1a] = KEY_B,
|
||||
+ [0x1b] = KEY_N,
|
||||
+ [0x1c] = KEY_LEFTSHIFT, /* Actually, this is both shift keys */
|
||||
+ [0x1f] = KEY_F7,
|
||||
+
|
||||
+ [0x21] = KEY_E,
|
||||
+ [0x22] = KEY_SEMICOLON,
|
||||
+ [0x23] = KEY_MINUS,
|
||||
+ [0x24] = KEY_EQUAL,
|
||||
+#ifdef MAP_FN_AS_LEFTALT
|
||||
+ [0x2b] = KEY_LEFTALT,
|
||||
+#else
|
||||
+ [0x2b] = KEY_FN,
|
||||
+#endif
|
||||
+ [0x2c] = KEY_M,
|
||||
+ [0x2f] = KEY_F8,
|
||||
+
|
||||
+ [0x31] = KEY_R,
|
||||
+ [0x32] = KEY_RIGHTCTRL,
|
||||
+ [0x34] = KEY_SPACE,
|
||||
+ [0x35] = KEY_COMMA,
|
||||
+ [0x37] = KEY_UP,
|
||||
+ [0x3c] = KEY_COMPOSE,
|
||||
+ [0x3f] = KEY_F6,
|
||||
+
|
||||
+ [0x41] = KEY_T,
|
||||
+ [0x44] = KEY_DOT,
|
||||
+ [0x46] = KEY_RIGHT,
|
||||
+ [0x4f] = KEY_F5,
|
||||
+ [0x51] = KEY_Y,
|
||||
+ [0x53] = KEY_DOWN,
|
||||
+ [0x55] = KEY_ENTER,
|
||||
+ [0x5f] = KEY_ESC,
|
||||
+
|
||||
+ [0x61] = KEY_U,
|
||||
+ [0x64] = KEY_LEFT,
|
||||
+
|
||||
+ [0x71] = KEY_I,
|
||||
+ [0x75] = KEY_KPENTER,
|
||||
+};
|
||||
+
|
||||
+static struct lm8323_platform_data lm8323_pdata = {
|
||||
+ .repeat = 0, /* Repeat is handled in userspace for now. */
|
||||
+ .keymap = rx44_keymap,
|
||||
+ .size_x = 8,
|
||||
+ .size_y = 12,
|
||||
+ .debounce_time = 12,
|
||||
+ .active_time = 500,
|
||||
+
|
||||
+ .name = "Internal keyboard",
|
||||
+ .pwm_names[0] = "n810::keyboard",
|
||||
+ .pwm_names[1] = "n810::cover",
|
||||
+};
|
||||
+
|
||||
+#define OMAP_TAG_NOKIA_BT 0x4e01
|
||||
+
|
||||
+struct omap_bluetooth_config {
|
||||
+ u8 chip_type;
|
||||
+ u8 bt_wakeup_gpio;
|
||||
+ u8 host_wakeup_gpio;
|
||||
+ u8 reset_gpio;
|
||||
+ u8 bt_uart;
|
||||
+ u8 bd_addr[6];
|
||||
+ u8 bt_sysclk;
|
||||
+};
|
||||
+
|
||||
+static struct platform_device n8x0_bt_device = {
|
||||
+ .name = "hci_h4p",
|
||||
+ .id = -1,
|
||||
+ .num_resources = 0,
|
||||
+};
|
||||
+
|
||||
+void __init n8x0_bt_init(void)
|
||||
+{
|
||||
+ const struct omap_bluetooth_config *bt_config;
|
||||
+
|
||||
+ bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT,
|
||||
+ struct omap_bluetooth_config);
|
||||
+ n8x0_bt_device.dev.platform_data = (void *) bt_config;
|
||||
+ if (platform_device_register(&n8x0_bt_device) < 0)
|
||||
+ BUG();
|
||||
+}
|
||||
+
|
||||
+static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = {
|
||||
+ {
|
||||
+ .name = "headphone",
|
||||
+ .gpio = -1,
|
||||
+ .debounce_rising = 200,
|
||||
+ .debounce_falling = 200,
|
||||
+ }, {
|
||||
+ .name = "cam_act",
|
||||
+ .gpio = -1,
|
||||
+ .debounce_rising = 200,
|
||||
+ .debounce_falling = 200,
|
||||
+ }, {
|
||||
+ .name = "cam_turn",
|
||||
+ .gpio = -1,
|
||||
+ .debounce_rising = 100,
|
||||
+ .debounce_falling = 100,
|
||||
+ }, {
|
||||
+ .name = "slide",
|
||||
+ .gpio = -1,
|
||||
+ .debounce_rising = 200,
|
||||
+ .debounce_falling = 200,
|
||||
+ }, {
|
||||
+ .name = "kb_lock",
|
||||
+ .gpio = -1,
|
||||
+ .debounce_rising = 200,
|
||||
+ .debounce_falling = 200,
|
||||
+ },
|
||||
+};
|
||||
+
|
||||
+static void __init n8x0_gpio_switches_init(void)
|
||||
+{
|
||||
+ /* The switches are actually registered through ATAG mechanism.
|
||||
+ * This just updates the parameters (thus .gpio is -1) */
|
||||
+ omap_register_gpio_switches(n8x0_gpio_switches,
|
||||
+ ARRAY_SIZE(n8x0_gpio_switches));
|
||||
+}
|
||||
+
|
||||
#define TUSB6010_ASYNC_CS 1
|
||||
#define TUSB6010_SYNC_CS 4
|
||||
#define TUSB6010_GPIO_INT 58
|
||||
@@ -799,6 +948,11 @@ static struct aic3x_pdata n810_aic33_dat
|
||||
};
|
||||
|
||||
static struct i2c_board_info n810_i2c_board_info_2[] __initdata = {
|
||||
+ {
|
||||
+ I2C_BOARD_INFO("lm8323", 0x45),
|
||||
+ .irq = OMAP_GPIO_IRQ(109),
|
||||
+ .platform_data = &lm8323_pdata,
|
||||
+ },
|
||||
{
|
||||
I2C_BOARD_INFO("tlv320aic3x", 0x18),
|
||||
.platform_data = &n810_aic33_data,
|
||||
@@ -856,7 +1010,9 @@ static inline void board_serial_init(voi
|
||||
static void __init n8x0_init_machine(void)
|
||||
{
|
||||
omap2420_mux_init(board_mux, OMAP_PACKAGE_ZAC);
|
||||
+ n8x0_gpio_switches_init();
|
||||
n8x0_cbus_init();
|
||||
+ n8x0_bt_init();
|
||||
|
||||
/* FIXME: add n810 spi devices */
|
||||
tsc2005_set_config();
|
||||
@ -0,0 +1,212 @@
|
||||
From f0bb9e67f0f13021e5033fed3dfe8ef78fe6a538 Mon Sep 17 00:00:00 2001
|
||||
From: Marat Radchenko <marat@slonopotamus.org>
|
||||
Date: Tue, 18 Oct 2011 21:52:56 +0400
|
||||
Subject: [PATCH 2/2] N800: add TSC2301 board info
|
||||
|
||||
This patch adds TSC2301 init logic to N800 board file
|
||||
---
|
||||
arch/arm/mach-omap2/board-n8x0.c | 141 ++++++++++++++++++++++++++++++++++++--
|
||||
1 files changed, 135 insertions(+), 6 deletions(-)
|
||||
|
||||
--- a/arch/arm/mach-omap2/board-n8x0.c
|
||||
+++ b/arch/arm/mach-omap2/board-n8x0.c
|
||||
@@ -27,6 +27,7 @@
|
||||
#include <linux/spi/tsc2005.h>
|
||||
#include <linux/input.h>
|
||||
#include <linux/i2c/lm8323.h>
|
||||
+#include <linux/spi/tsc2301.h>
|
||||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
@@ -63,7 +64,75 @@ static struct omap2_mcspi_device_config
|
||||
};
|
||||
#endif
|
||||
|
||||
-static void __init tsc2005_set_config(void)
|
||||
+#ifdef CONFIG_TOUCHSCREEN_TSC2301
|
||||
+
|
||||
+#define N800_KEYB_IRQ_GPIO 109
|
||||
+
|
||||
+static struct tsc2301_platform_data tsc2301_config = {
|
||||
+ .reset_gpio = 118,
|
||||
+ .keymap = {
|
||||
+ -1, /* Event for bit 0 */
|
||||
+ KEY_UP, /* Event for bit 1 (up) */
|
||||
+ KEY_F5, /* Event for bit 2 (home) */
|
||||
+ -1, /* Event for bit 3 */
|
||||
+ KEY_LEFT, /* Event for bit 4 (left) */
|
||||
+ KEY_ENTER, /* Event for bit 5 (enter) */
|
||||
+ KEY_RIGHT, /* Event for bit 6 (right) */
|
||||
+ -1, /* Event for bit 7 */
|
||||
+ KEY_ESC, /* Event for bit 8 (cycle) */
|
||||
+ KEY_DOWN, /* Event for bit 9 (down) */
|
||||
+ KEY_F4, /* Event for bit 10 (menu) */
|
||||
+ -1, /* Event for bit 11 */
|
||||
+ KEY_F8, /* Event for bit 12 (Zoom-) */
|
||||
+ KEY_F6, /* Event for bit 13 (FS) */
|
||||
+ KEY_F7, /* Event for bit 14 (Zoom+) */
|
||||
+ -1, /* Event for bit 15 */
|
||||
+ },
|
||||
+ .kp_rep = 0,
|
||||
+ .keyb_name = "Internal keypad",
|
||||
+};
|
||||
+
|
||||
+static struct omap2_mcspi_device_config tsc2301_mcspi_config = {
|
||||
+ .turbo_mode = 0,
|
||||
+ .single_channel = 1,
|
||||
+};
|
||||
+
|
||||
+/*
|
||||
+ TODO(Marat Radchenko): better pass GPIO to tsc2301 driver and let it
|
||||
+ allocate irq itself (as it is already done for touchscreen)
|
||||
+ */
|
||||
+static void tsc2301_dev_init(void)
|
||||
+{
|
||||
+ int r;
|
||||
+ int gpio = N800_KEYB_IRQ_GPIO;
|
||||
+
|
||||
+ r = gpio_request(gpio, "tsc2301 KBD IRQ");
|
||||
+ if (r >= 0) {
|
||||
+ gpio_direction_input(gpio);
|
||||
+ tsc2301_config.keyb_int = gpio_to_irq(gpio);
|
||||
+ } else {
|
||||
+ printk(KERN_ERR "unable to get KBD GPIO");
|
||||
+ }
|
||||
+
|
||||
+ gpio = 103;
|
||||
+ r = gpio_request(gpio, "tsc2301 DAV IRQ");
|
||||
+ if (r >= 0) {
|
||||
+ gpio_direction_input(gpio);
|
||||
+ tsc2301_config.dav_int = gpio_to_irq(gpio);
|
||||
+ } else {
|
||||
+ printk(KERN_ERR "unable to get DAV GPIO");
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+#else
|
||||
+
|
||||
+static void __init tsc2301_dev_init(void)
|
||||
+{
|
||||
+}
|
||||
+
|
||||
+#endif
|
||||
+
|
||||
+static void __init n8x0_ts_set_config(void)
|
||||
{
|
||||
const struct omap_lcd_config *conf;
|
||||
|
||||
@@ -94,6 +163,37 @@ static void __init tsc2005_set_config(vo
|
||||
tsc2005_config.ts_x_plate_ohm = 200;
|
||||
}
|
||||
#endif
|
||||
+
|
||||
+#ifdef CONFIG_TOUCHSCREEN_TSC2301
|
||||
+ if (strcmp(conf->panel_name, "lph8923") == 0) {
|
||||
+ tsc2301_config.ts_x_plate_ohm = 180;
|
||||
+ tsc2301_config.ts_hw_avg = 8;
|
||||
+ tsc2301_config.ts_max_pressure = 2048;
|
||||
+ tsc2301_config.ts_touch_pressure = 400;
|
||||
+ tsc2301_config.ts_stab_time = 100;
|
||||
+ tsc2301_config.ts_pressure_fudge = 2;
|
||||
+ tsc2301_config.ts_x_max = 4096;
|
||||
+ tsc2301_config.ts_x_fudge = 4;
|
||||
+ tsc2301_config.ts_y_max = 4096;
|
||||
+ tsc2301_config.ts_y_fudge = 7;
|
||||
+ } else if (strcmp(conf->panel_name, "ls041y3") == 0) {
|
||||
+ tsc2301_config.ts_x_plate_ohm = 280;
|
||||
+ tsc2301_config.ts_hw_avg = 8;
|
||||
+ tsc2301_config.ts_touch_pressure = 400;
|
||||
+ tsc2301_config.ts_max_pressure = 2048;
|
||||
+ tsc2301_config.ts_stab_time = 1000;
|
||||
+ tsc2301_config.ts_pressure_fudge = 2;
|
||||
+ tsc2301_config.ts_x_max = 4096;
|
||||
+ tsc2301_config.ts_x_fudge = 4;
|
||||
+ tsc2301_config.ts_y_max = 4096;
|
||||
+ tsc2301_config.ts_y_fudge = 7;
|
||||
+ } else {
|
||||
+ printk(KERN_ERR "Unknown panel type, set default "
|
||||
+ "touchscreen configuration\n");
|
||||
+ tsc2301_config.ts_x_plate_ohm = 200;
|
||||
+ tsc2301_config.ts_stab_time = 100;
|
||||
+ }
|
||||
+#endif
|
||||
}
|
||||
}
|
||||
|
||||
@@ -347,13 +447,12 @@ static void __init n8x0_usb_init(void) {
|
||||
|
||||
#endif /*CONFIG_USB_MUSB_TUSB6010 */
|
||||
|
||||
-
|
||||
static struct omap2_mcspi_device_config p54spi_mcspi_config = {
|
||||
.turbo_mode = 0,
|
||||
.single_channel = 1,
|
||||
};
|
||||
|
||||
-static struct spi_board_info n800_spi_board_info[] __initdata = {
|
||||
+static struct spi_board_info n8x0_common_spi_board_info[] __initdata = {
|
||||
{
|
||||
.modalias = "lcd_mipid",
|
||||
.bus_num = 1,
|
||||
@@ -369,6 +468,10 @@ static struct spi_board_info n800_spi_bo
|
||||
.max_speed_hz = 48000000,
|
||||
.controller_data = &p54spi_mcspi_config,
|
||||
},
|
||||
+};
|
||||
+
|
||||
+static struct spi_board_info n810_spi_board_info[] __initdata = {
|
||||
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
|
||||
{
|
||||
.modalias = "tsc2005",
|
||||
.bus_num = 1,
|
||||
@@ -378,6 +481,20 @@ static struct spi_board_info n800_spi_bo
|
||||
.controller_data = &tsc2005_mcspi_config,
|
||||
.platform_data = &tsc2005_config,
|
||||
},
|
||||
+#endif
|
||||
+};
|
||||
+
|
||||
+static struct spi_board_info n800_spi_board_info[] __initdata = {
|
||||
+#if defined(CONFIG_TOUCHSCREEN_TSC2301)
|
||||
+ {
|
||||
+ .modalias = "tsc2301",
|
||||
+ .bus_num = 1,
|
||||
+ .chip_select = 0,
|
||||
+ .max_speed_hz = 6000000,
|
||||
+ .controller_data = &tsc2301_mcspi_config,
|
||||
+ .platform_data = &tsc2301_config,
|
||||
+ },
|
||||
+#endif
|
||||
};
|
||||
|
||||
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
|
||||
@@ -1015,9 +1132,17 @@ static void __init n8x0_init_machine(voi
|
||||
n8x0_bt_init();
|
||||
|
||||
/* FIXME: add n810 spi devices */
|
||||
- tsc2005_set_config();
|
||||
- spi_register_board_info(n800_spi_board_info,
|
||||
- ARRAY_SIZE(n800_spi_board_info));
|
||||
+ n8x0_ts_set_config();
|
||||
+
|
||||
+ spi_register_board_info(n8x0_common_spi_board_info,
|
||||
+ ARRAY_SIZE(n8x0_common_spi_board_info));
|
||||
+ if (machine_is_nokia_n800())
|
||||
+ spi_register_board_info(n800_spi_board_info,
|
||||
+ ARRAY_SIZE(n800_spi_board_info));
|
||||
+ else
|
||||
+ spi_register_board_info(n810_spi_board_info,
|
||||
+ ARRAY_SIZE(n810_spi_board_info));
|
||||
+
|
||||
omap_register_i2c_bus(1, 400, n8x0_i2c_board_info_1,
|
||||
ARRAY_SIZE(n8x0_i2c_board_info_1));
|
||||
omap_register_i2c_bus(2, 400, NULL, 0);
|
||||
@@ -1027,6 +1152,8 @@ static void __init n8x0_init_machine(voi
|
||||
board_serial_init();
|
||||
n8x0_mipid_init();
|
||||
n8x0_blizzard_init();
|
||||
+ if (machine_is_nokia_n800())
|
||||
+ tsc2301_dev_init();
|
||||
omap_sdrc_init(NULL, NULL);
|
||||
gpmc_onenand_init(board_onenand_data);
|
||||
n8x0_mmc_init();
|
||||
@ -0,0 +1,98 @@
|
||||
---
|
||||
arch/arm/mach-omap2/board-n8x0.c | 73 +++++++++++++++++++++++++++++++++++++++
|
||||
1 file changed, 73 insertions(+)
|
||||
|
||||
--- a/arch/arm/mach-omap2/board-n8x0.c
|
||||
+++ b/arch/arm/mach-omap2/board-n8x0.c
|
||||
@@ -316,6 +316,77 @@ void __init n8x0_bt_init(void)
|
||||
BUG();
|
||||
}
|
||||
|
||||
+struct gpio_switch_input_dev {
|
||||
+ struct input_dev *idev;
|
||||
+ unsigned int swcode;
|
||||
+};
|
||||
+
|
||||
+static struct gpio_switch_input_dev *slide_input;
|
||||
+static struct gpio_switch_input_dev *kblock_input;
|
||||
+
|
||||
+static void n8x0_gpio_switch_input_notify(struct gpio_switch_input_dev *gdev,
|
||||
+ int state)
|
||||
+{
|
||||
+ if (gdev) {
|
||||
+ input_report_switch(gdev->idev, gdev->swcode, state);
|
||||
+ input_sync(gdev->idev);
|
||||
+ }
|
||||
+}
|
||||
+
|
||||
+static void n8x0_slide_notify(void *data, int state)
|
||||
+{
|
||||
+ n8x0_gpio_switch_input_notify(slide_input, state);
|
||||
+}
|
||||
+
|
||||
+static void n8x0_kb_lock_notify(void *data, int state)
|
||||
+{
|
||||
+ n8x0_gpio_switch_input_notify(kblock_input, state);
|
||||
+}
|
||||
+
|
||||
+static struct gpio_switch_input_dev * __init gpioswitch_input_init(
|
||||
+ const char *name,
|
||||
+ unsigned int swcode)
|
||||
+{
|
||||
+ struct gpio_switch_input_dev *gdev;
|
||||
+ int err;
|
||||
+
|
||||
+ gdev = kzalloc(sizeof(*gdev), GFP_KERNEL);
|
||||
+ if (!gdev)
|
||||
+ goto error;
|
||||
+ gdev->swcode = swcode;
|
||||
+
|
||||
+ gdev->idev = input_allocate_device();
|
||||
+ if (!gdev->idev)
|
||||
+ goto err_free;
|
||||
+
|
||||
+ gdev->idev->evbit[0] = BIT_MASK(EV_SW);
|
||||
+ gdev->idev->swbit[BIT_WORD(swcode)] = BIT_MASK(swcode);
|
||||
+ gdev->idev->name = name;
|
||||
+
|
||||
+ err = input_register_device(gdev->idev);
|
||||
+ if (err)
|
||||
+ goto err_free_idev;
|
||||
+
|
||||
+ return gdev;
|
||||
+
|
||||
+err_free_idev:
|
||||
+ input_free_device(gdev->idev);
|
||||
+err_free:
|
||||
+ kfree(gdev);
|
||||
+error:
|
||||
+ return NULL;
|
||||
+}
|
||||
+
|
||||
+static int __init n8x0_gpio_switches_input_init(void)
|
||||
+{
|
||||
+ slide_input = gpioswitch_input_init("slide", SW_KEYPAD_SLIDE);
|
||||
+ kblock_input = gpioswitch_input_init("kb_lock", SW_LID);
|
||||
+ if (WARN_ON(!slide_input || !kblock_input))
|
||||
+ return -ENODEV;
|
||||
+ return 0;
|
||||
+}
|
||||
+late_initcall(n8x0_gpio_switches_input_init);
|
||||
+
|
||||
static struct omap_gpio_switch n8x0_gpio_switches[] __initdata = {
|
||||
{
|
||||
.name = "headphone",
|
||||
@@ -337,11 +408,13 @@ static struct omap_gpio_switch n8x0_gpio
|
||||
.gpio = -1,
|
||||
.debounce_rising = 200,
|
||||
.debounce_falling = 200,
|
||||
+ .notify = n8x0_slide_notify,
|
||||
}, {
|
||||
.name = "kb_lock",
|
||||
.gpio = -1,
|
||||
.debounce_rising = 200,
|
||||
.debounce_falling = 200,
|
||||
+ .notify = n8x0_kb_lock_notify,
|
||||
},
|
||||
};
|
||||
|
||||
1946
target/linux/omap24xx/patches-3.3/400-bluetooth-hci_h4p.patch
Normal file
1946
target/linux/omap24xx/patches-3.3/400-bluetooth-hci_h4p.patch
Normal file
File diff suppressed because it is too large
Load Diff
46
target/linux/omap24xx/patches-3.3/410-hci-h4p-fixes.patch
Normal file
46
target/linux/omap24xx/patches-3.3/410-hci-h4p-fixes.patch
Normal file
@ -0,0 +1,46 @@
|
||||
--- a/drivers/bluetooth/hci_h4p/core.c
|
||||
+++ b/drivers/bluetooth/hci_h4p/core.c
|
||||
@@ -36,9 +36,9 @@
|
||||
#include <linux/clk.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
-#include <mach/hardware.h>
|
||||
-#include <mach/board.h>
|
||||
-#include <mach/irqs.h>
|
||||
+#include <plat/hardware.h>
|
||||
+#include <plat/board.h>
|
||||
+#include <plat/irqs.h>
|
||||
#include <plat/serial.h>
|
||||
|
||||
#include <net/bluetooth/bluetooth.h>
|
||||
--- a/drivers/bluetooth/hci_h4p/hci_h4p.h
|
||||
+++ b/drivers/bluetooth/hci_h4p/hci_h4p.h
|
||||
@@ -21,7 +21,7 @@
|
||||
*
|
||||
*/
|
||||
|
||||
-#include <mach/board.h>
|
||||
+#include <plat/board.h>
|
||||
|
||||
#include <net/bluetooth/bluetooth.h>
|
||||
#include <net/bluetooth/hci_core.h>
|
||||
--- a/drivers/bluetooth/hci_h4p/sysfs.c
|
||||
+++ b/drivers/bluetooth/hci_h4p/sysfs.c
|
||||
@@ -48,15 +48,8 @@ static ssize_t hci_h4p_store_bdaddr(stru
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
- //for (i = 0; i < 6; i++)
|
||||
- //info->bdaddr[i] = bdaddr[i] & 0xff;
|
||||
-
|
||||
- info->bdaddr[0] = 0x00;
|
||||
- info->bdaddr[1] = 0x1D;
|
||||
- info->bdaddr[2] = 0x6E;
|
||||
- info->bdaddr[3] = 0xD4;
|
||||
- info->bdaddr[4] = 0xF0;
|
||||
- info->bdaddr[5] = 0x37;
|
||||
+ for (i = 0; i < 6; i++)
|
||||
+ info->bdaddr[i] = bdaddr[i] & 0xff;
|
||||
|
||||
return count;
|
||||
}
|
||||
@ -0,0 +1,36 @@
|
||||
--- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
|
||||
+++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c
|
||||
@@ -235,7 +235,7 @@ struct omap_hwmod_irq_info omap2_timer11
|
||||
};
|
||||
|
||||
struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = {
|
||||
- { .irq = INT_24XX_UART1_IRQ, },
|
||||
+ { .irq = 0, },
|
||||
{ .irq = -1 }
|
||||
};
|
||||
|
||||
--- a/drivers/tty/serial/omap-serial.c
|
||||
+++ b/drivers/tty/serial/omap-serial.c
|
||||
@@ -517,8 +517,10 @@ static int serial_omap_startup(struct ua
|
||||
/*
|
||||
* Allocate the IRQ
|
||||
*/
|
||||
- retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags,
|
||||
- up->name, up);
|
||||
+ retval = 0;
|
||||
+ if (up->port.irq)
|
||||
+ retval = request_irq(up->port.irq, serial_omap_irq,
|
||||
+ up->port.irqflags, up->name, up);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
@@ -629,7 +631,8 @@ static void serial_omap_shutdown(struct
|
||||
}
|
||||
|
||||
pm_runtime_put(&up->pdev->dev);
|
||||
- free_irq(up->port.irq, up);
|
||||
+ if (up->port.irq)
|
||||
+ free_irq(up->port.irq, up);
|
||||
}
|
||||
|
||||
static inline void
|
||||
@ -0,0 +1,34 @@
|
||||
--- a/arch/arm/mach-omap2/board-n8x0.c
|
||||
+++ b/arch/arm/mach-omap2/board-n8x0.c
|
||||
@@ -41,6 +41,7 @@
|
||||
#include <plat/mmc.h>
|
||||
#include <plat/serial.h>
|
||||
#include <plat/gpio-switch.h>
|
||||
+#include <plat/usb.h>
|
||||
|
||||
#include "mux.h"
|
||||
|
||||
@@ -486,6 +487,14 @@ static struct musb_hdrc_platform_data tu
|
||||
.config = &musb_config,
|
||||
};
|
||||
|
||||
+static struct omap_usb_config n8x0_omap_usb_config __initdata = {
|
||||
+ .otg = 1,
|
||||
+ .register_host = 1,
|
||||
+ .register_dev = 1,
|
||||
+ .hmc_mode = 16,
|
||||
+ .pins[0] = 6,
|
||||
+};
|
||||
+
|
||||
static void __init n8x0_usb_init(void)
|
||||
{
|
||||
int ret = 0;
|
||||
@@ -507,6 +516,8 @@ static void __init n8x0_usb_init(void)
|
||||
if (ret != 0)
|
||||
goto err;
|
||||
|
||||
+ omap2_usbfs_init(&n8x0_omap_usb_config);
|
||||
+
|
||||
printk(announce);
|
||||
|
||||
return;
|
||||
@ -0,0 +1,31 @@
|
||||
---
|
||||
drivers/input/evdev.c | 10 +++++++---
|
||||
1 file changed, 7 insertions(+), 3 deletions(-)
|
||||
|
||||
--- a/drivers/input/evdev.c
|
||||
+++ b/drivers/input/evdev.c
|
||||
@@ -92,7 +92,7 @@ static void evdev_event(struct input_han
|
||||
unsigned int type, unsigned int code, int value)
|
||||
{
|
||||
struct evdev *evdev = handle->private;
|
||||
- struct evdev_client *client;
|
||||
+ struct evdev_client *client, *c;
|
||||
struct input_event event;
|
||||
|
||||
do_gettimeofday(&event.time);
|
||||
@@ -103,9 +103,13 @@ static void evdev_event(struct input_han
|
||||
rcu_read_lock();
|
||||
|
||||
client = rcu_dereference(evdev->grab);
|
||||
- if (client)
|
||||
+ if (client) {
|
||||
evdev_pass_event(client, &event);
|
||||
- else
|
||||
+ /* Also pass events to clients that did not grab the device. */
|
||||
+ list_for_each_entry_rcu(c, &evdev->client_list, node)
|
||||
+ if (c != client)
|
||||
+ evdev_pass_event(c, &event);
|
||||
+ } else
|
||||
list_for_each_entry_rcu(client, &evdev->client_list, node)
|
||||
evdev_pass_event(client, &event);
|
||||
|
||||
50
target/linux/omap24xx/patches-3.3/810-mmc-fixes.patch
Normal file
50
target/linux/omap24xx/patches-3.3/810-mmc-fixes.patch
Normal file
@ -0,0 +1,50 @@
|
||||
--- a/drivers/mmc/host/omap.c
|
||||
+++ b/drivers/mmc/host/omap.c
|
||||
@@ -1456,6 +1456,7 @@ static int __init mmc_omap_probe(struct
|
||||
host->dma_ch = -1;
|
||||
|
||||
host->irq = irq;
|
||||
+ host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
|
||||
host->phys_base = host->mem_res->start;
|
||||
host->virt_base = ioremap(res->start, resource_size(res));
|
||||
if (!host->virt_base)
|
||||
@@ -1495,7 +1496,9 @@ static int __init mmc_omap_probe(struct
|
||||
}
|
||||
}
|
||||
|
||||
- host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
|
||||
+ /* Make sure the detect workqueue was run at least once. */
|
||||
+ printk(KERN_INFO "OMAP-mmc: waiting for cards...\n");
|
||||
+ mmc_flush_scheduled_work();
|
||||
|
||||
return 0;
|
||||
|
||||
--- a/drivers/mmc/core/core.c
|
||||
+++ b/drivers/mmc/core/core.c
|
||||
@@ -78,12 +78,13 @@ static int mmc_schedule_delayed_work(str
|
||||
}
|
||||
|
||||
/*
|
||||
- * Internal function. Flush all scheduled work from the MMC work queue.
|
||||
+ * Flush all scheduled work from the MMC work queue.
|
||||
*/
|
||||
-static void mmc_flush_scheduled_work(void)
|
||||
+void mmc_flush_scheduled_work(void)
|
||||
{
|
||||
flush_workqueue(workqueue);
|
||||
}
|
||||
+EXPORT_SYMBOL(mmc_flush_scheduled_work);
|
||||
|
||||
#ifdef CONFIG_FAIL_MMC_REQUEST
|
||||
|
||||
--- a/include/linux/mmc/host.h
|
||||
+++ b/include/linux/mmc/host.h
|
||||
@@ -445,6 +445,8 @@ static inline int mmc_boot_partition_acc
|
||||
return !(host->caps2 & MMC_CAP2_BOOTPART_NOACC);
|
||||
}
|
||||
|
||||
+void mmc_flush_scheduled_work(void);
|
||||
+
|
||||
#ifdef CONFIG_MMC_CLKGATE
|
||||
void mmc_host_clk_hold(struct mmc_host *host);
|
||||
void mmc_host_clk_release(struct mmc_host *host);
|
||||
@ -0,0 +1,23 @@
|
||||
--- a/arch/arm/mach-omap2/serial.c
|
||||
+++ b/arch/arm/mach-omap2/serial.c
|
||||
@@ -258,6 +258,8 @@ char *cmdline_find_option(char *str)
|
||||
return strstr(saved_command_line, str);
|
||||
}
|
||||
|
||||
+static struct omap_uart_state statebuf[4];
|
||||
+
|
||||
static int __init omap_serial_early_init(void)
|
||||
{
|
||||
do {
|
||||
@@ -272,9 +274,9 @@ static int __init omap_serial_early_init
|
||||
if (!oh)
|
||||
break;
|
||||
|
||||
- uart = kzalloc(sizeof(struct omap_uart_state), GFP_KERNEL);
|
||||
- if (WARN_ON(!uart))
|
||||
+ if (WARN_ON(num_uarts >= ARRAY_SIZE(statebuf)))
|
||||
return -ENODEV;
|
||||
+ uart = &statebuf[num_uarts];
|
||||
|
||||
uart->oh = oh;
|
||||
uart->num = num_uarts++;
|
||||
@ -0,0 +1,135 @@
|
||||
--- a/drivers/usb/musb/tusb6010.c
|
||||
+++ b/drivers/usb/musb/tusb6010.c
|
||||
@@ -221,6 +221,7 @@ void musb_write_fifo(struct musb_hw_ep *
|
||||
if (len > 0)
|
||||
tusb_fifo_write_unaligned(fifo, buf, len);
|
||||
}
|
||||
+EXPORT_SYMBOL(musb_write_fifo);
|
||||
|
||||
void musb_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *buf)
|
||||
{
|
||||
@@ -268,6 +269,7 @@ void musb_read_fifo(struct musb_hw_ep *h
|
||||
if (len > 0)
|
||||
tusb_fifo_read_unaligned(fifo, buf, len);
|
||||
}
|
||||
+EXPORT_SYMBOL(musb_read_fifo);
|
||||
|
||||
static struct musb *the_musb;
|
||||
|
||||
@@ -1165,7 +1167,7 @@ static const struct musb_platform_ops tu
|
||||
|
||||
static u64 tusb_dmamask = DMA_BIT_MASK(32);
|
||||
|
||||
-static int __init tusb_probe(struct platform_device *pdev)
|
||||
+static int tusb_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct musb_hdrc_platform_data *pdata = pdev->dev.platform_data;
|
||||
struct platform_device *musb;
|
||||
@@ -1245,18 +1247,18 @@ static struct platform_driver tusb_drive
|
||||
},
|
||||
};
|
||||
|
||||
-MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
|
||||
-MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
|
||||
-MODULE_LICENSE("GPL v2");
|
||||
+//MODULE_DESCRIPTION("TUSB6010 MUSB Glue Layer");
|
||||
+//MODULE_AUTHOR("Felipe Balbi <balbi@ti.com>");
|
||||
+//MODULE_LICENSE("GPL v2");
|
||||
|
||||
-static int __init tusb_init(void)
|
||||
+int musb_hdrc_glue_init(void)
|
||||
{
|
||||
return platform_driver_probe(&tusb_driver, tusb_probe);
|
||||
}
|
||||
-subsys_initcall(tusb_init);
|
||||
+EXPORT_SYMBOL(musb_hdrc_glue_init);
|
||||
|
||||
-static void __exit tusb_exit(void)
|
||||
+void musb_hdrc_glue_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&tusb_driver);
|
||||
}
|
||||
-module_exit(tusb_exit);
|
||||
+EXPORT_SYMBOL(musb_hdrc_glue_exit);
|
||||
--- a/drivers/usb/musb/musb_core.c
|
||||
+++ b/drivers/usb/musb/musb_core.c
|
||||
@@ -207,7 +207,7 @@ static struct otg_io_access_ops musb_ulp
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
-#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_BLACKFIN)
|
||||
+#if !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_TUSB6010_MODULE) && !defined(CONFIG_USB_MUSB_BLACKFIN)
|
||||
|
||||
/*
|
||||
* Load an endpoint's FIFO
|
||||
@@ -250,7 +250,7 @@ void musb_write_fifo(struct musb_hw_ep *
|
||||
}
|
||||
}
|
||||
|
||||
-#if !defined(CONFIG_USB_MUSB_AM35X)
|
||||
+#if !defined(CONFIG_USB_MUSB_AM35X) && !defined(CONFIG_USB_MUSB_TUSB6010) && !defined(CONFIG_USB_MUSB_TUSB6010_MODULE)
|
||||
/*
|
||||
* Unload an endpoint's FIFO
|
||||
*/
|
||||
@@ -2370,8 +2370,13 @@ static struct platform_driver musb_drive
|
||||
|
||||
/*-------------------------------------------------------------------------*/
|
||||
|
||||
+extern int musb_hdrc_glue_init(void);
|
||||
+extern void musb_hdrc_glue_exit(void);
|
||||
+
|
||||
static int __init musb_init(void)
|
||||
{
|
||||
+ int err;
|
||||
+
|
||||
if (usb_disabled())
|
||||
return 0;
|
||||
|
||||
@@ -2380,7 +2385,17 @@ static int __init musb_init(void)
|
||||
", "
|
||||
"otg (peripheral+host)",
|
||||
musb_driver_name);
|
||||
- return platform_driver_probe(&musb_driver, musb_probe);
|
||||
+
|
||||
+ err = musb_hdrc_glue_init();
|
||||
+ if (err)
|
||||
+ return err;
|
||||
+ err = platform_driver_probe(&musb_driver, musb_probe);
|
||||
+ if (err) {
|
||||
+ musb_hdrc_glue_exit();
|
||||
+ return err;
|
||||
+ }
|
||||
+
|
||||
+ return 0;
|
||||
}
|
||||
|
||||
/* make us init after usbcore and i2c (transceivers, regulators, etc)
|
||||
@@ -2391,5 +2406,6 @@ fs_initcall(musb_init);
|
||||
static void __exit musb_cleanup(void)
|
||||
{
|
||||
platform_driver_unregister(&musb_driver);
|
||||
+ musb_hdrc_glue_exit();
|
||||
}
|
||||
module_exit(musb_cleanup);
|
||||
--- a/drivers/usb/Makefile
|
||||
+++ b/drivers/usb/Makefile
|
||||
@@ -51,7 +51,7 @@ obj-$(CONFIG_EARLY_PRINTK_DBGP) += early
|
||||
obj-$(CONFIG_USB_ATM) += atm/
|
||||
obj-$(CONFIG_USB_SPEEDTOUCH) += atm/
|
||||
|
||||
-obj-$(CONFIG_USB_MUSB_HDRC) += musb/
|
||||
+obj-y += musb/
|
||||
obj-$(CONFIG_USB_RENESAS_USBHS) += renesas_usbhs/
|
||||
obj-$(CONFIG_USB_GADGET) += gadget/
|
||||
|
||||
--- a/drivers/usb/musb/Makefile
|
||||
+++ b/drivers/usb/musb/Makefile
|
||||
@@ -13,7 +13,7 @@ musb_hdrc-$(CONFIG_DEBUG_FS) += musb_d
|
||||
# Hardware Glue Layer
|
||||
obj-$(CONFIG_USB_MUSB_OMAP2PLUS) += omap2430.o
|
||||
obj-$(CONFIG_USB_MUSB_AM35X) += am35x.o
|
||||
-obj-$(CONFIG_USB_MUSB_TUSB6010) += tusb6010.o
|
||||
+musb_hdrc-$(subst m,y,$(CONFIG_USB_MUSB_TUSB6010)) += tusb6010.o
|
||||
obj-$(CONFIG_USB_MUSB_DAVINCI) += davinci.o
|
||||
obj-$(CONFIG_USB_MUSB_DA8XX) += da8xx.o
|
||||
obj-$(CONFIG_USB_MUSB_BLACKFIN) += blackfin.o
|
||||
1917
target/linux/omap24xx/patches-3.3/900-n810-battery-management.patch
Normal file
1917
target/linux/omap24xx/patches-3.3/900-n810-battery-management.patch
Normal file
File diff suppressed because it is too large
Load Diff
@ -0,0 +1,116 @@
|
||||
--- a/arch/arm/plat-omap/omap_device.c
|
||||
+++ b/arch/arm/plat-omap/omap_device.c
|
||||
@@ -619,7 +619,7 @@ static void omap_device_delete(struct om
|
||||
* information. Returns ERR_PTR(-EINVAL) if @oh is NULL; otherwise,
|
||||
* passes along the return value of omap_device_build_ss().
|
||||
*/
|
||||
-struct platform_device *omap_device_build(const char *pdev_name, int pdev_id,
|
||||
+struct platform_device *__init omap_device_build(const char *pdev_name, int pdev_id,
|
||||
struct omap_hwmod *oh, void *pdata,
|
||||
int pdata_len,
|
||||
struct omap_device_pm_latency *pm_lats,
|
||||
@@ -652,7 +652,7 @@ struct platform_device *omap_device_buil
|
||||
* platform_device record. Returns an ERR_PTR() on error, or passes
|
||||
* along the return value of omap_device_register().
|
||||
*/
|
||||
-struct platform_device *omap_device_build_ss(const char *pdev_name, int pdev_id,
|
||||
+struct platform_device *__init omap_device_build_ss(const char *pdev_name, int pdev_id,
|
||||
struct omap_hwmod **ohs, int oh_cnt,
|
||||
void *pdata, int pdata_len,
|
||||
struct omap_device_pm_latency *pm_lats,
|
||||
@@ -717,7 +717,7 @@ odbs_exit:
|
||||
* platform_early_add_device() on the underlying platform_device.
|
||||
* Returns 0 by default.
|
||||
*/
|
||||
-static int omap_early_device_register(struct platform_device *pdev)
|
||||
+static int __init omap_early_device_register(struct platform_device *pdev)
|
||||
{
|
||||
struct platform_device *devices[1];
|
||||
|
||||
--- a/arch/arm/plat-omap/common.c
|
||||
+++ b/arch/arm/plat-omap/common.c
|
||||
@@ -29,7 +29,7 @@
|
||||
|
||||
#define NO_LENGTH_CHECK 0xffffffff
|
||||
|
||||
-struct omap_board_config_kernel *omap_board_config __initdata;
|
||||
+struct omap_board_config_kernel *omap_board_config;
|
||||
int omap_board_config_size;
|
||||
|
||||
unsigned char omap_bootloader_tag[1024];
|
||||
@@ -58,7 +58,7 @@ __tagtable(ATAG_BOARD, parse_tag_omap);
|
||||
|
||||
#endif
|
||||
|
||||
-static const void *__init get_config(u16 tag, size_t len,
|
||||
+static const void *get_config(u16 tag, size_t len,
|
||||
int skip, size_t *len_out)
|
||||
{
|
||||
struct omap_board_config_kernel *kinfo = NULL;
|
||||
@@ -125,12 +125,12 @@ static const void *__init get_config(u16
|
||||
return kinfo->data;
|
||||
}
|
||||
|
||||
-const void *__init __omap_get_config(u16 tag, size_t len, int nr)
|
||||
+const void *__omap_get_config(u16 tag, size_t len, int nr)
|
||||
{
|
||||
return get_config(tag, len, nr, NULL);
|
||||
}
|
||||
|
||||
-const void *__init omap_get_var_config(u16 tag, size_t *len)
|
||||
+const void *omap_get_var_config(u16 tag, size_t *len)
|
||||
{
|
||||
return get_config(tag, NO_LENGTH_CHECK, 0, len);
|
||||
}
|
||||
--- a/arch/arm/mach-omap2/devices.c
|
||||
+++ b/arch/arm/mach-omap2/devices.c
|
||||
@@ -380,7 +380,7 @@ static inline void omap_init_dmic(void)
|
||||
|
||||
#include <plat/mcspi.h>
|
||||
|
||||
-static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
|
||||
+static int __init omap_mcspi_init(struct omap_hwmod *oh, void *unused)
|
||||
{
|
||||
struct platform_device *pdev;
|
||||
char *name = "omap2_mcspi";
|
||||
--- a/arch/arm/mach-omap2/gpio.c
|
||||
+++ b/arch/arm/mach-omap2/gpio.c
|
||||
@@ -24,7 +24,7 @@
|
||||
#include <plat/omap_hwmod.h>
|
||||
#include <plat/omap_device.h>
|
||||
|
||||
-static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
|
||||
+static int __init omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused)
|
||||
{
|
||||
struct platform_device *pdev;
|
||||
struct omap_gpio_platform_data *pdata;
|
||||
--- a/arch/arm/mach-omap2/mcbsp.c
|
||||
+++ b/arch/arm/mach-omap2/mcbsp.c
|
||||
@@ -122,7 +122,7 @@ static int omap3_enable_st_clock(unsigne
|
||||
return 0;
|
||||
}
|
||||
|
||||
-static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
|
||||
+static int __init omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
|
||||
{
|
||||
int id, count = 1;
|
||||
char *name = "omap-mcbsp";
|
||||
--- a/arch/arm/plat-omap/include/plat/board.h
|
||||
+++ b/arch/arm/plat-omap/include/plat/board.h
|
||||
@@ -159,14 +159,14 @@ struct omap_gpio_switch_config {
|
||||
int key_code:24; /* Linux key code */
|
||||
};
|
||||
|
||||
-extern const void *__init __omap_get_config(u16 tag, size_t len, int nr);
|
||||
+extern const void * __omap_get_config(u16 tag, size_t len, int nr);
|
||||
|
||||
#define omap_get_config(tag, type) \
|
||||
((const type *) __omap_get_config((tag), sizeof(type), 0))
|
||||
#define omap_get_nr_config(tag, type, nr) \
|
||||
((const type *) __omap_get_config((tag), sizeof(type), (nr)))
|
||||
|
||||
-extern const void *__init omap_get_var_config(u16 tag, size_t *len);
|
||||
+extern const void * omap_get_var_config(u16 tag, size_t *len);
|
||||
|
||||
extern struct omap_board_config_kernel *omap_board_config;
|
||||
extern int omap_board_config_size;
|
||||
Loading…
Reference in New Issue
Block a user