hide experimental/developer options from the user. can be reenabled by using make menuconfig DEVELOPER=1

git-svn-id: svn://svn.openwrt.org/openwrt/trunk/openwrt@567 3c298f89-4303-0410-b956-a3cf2f4a3e73

Config.in

@@ -11,7 +11,6 @@ config BR2_HAVE_DOT_CONFIG
 	default y
 
 choice
-	prompt "Target Architecture"
 	default BR2_mipsel
 	help
 	  Stuff
@@ -65,7 +64,7 @@ config BR2_ARCH
 	default "i386"    if BR2_i386
 	default "m68k"    if BR2_m68k
 	default "mips"    if BR2_mips
-	default "mipsel"  if BR2_mipsel
+	default "mipsel"  if BR2_mipsel || !CONFIG_DEVEL
 	default "powerpc" if BR2_powerpc
 	default "sh3"     if BR2_sh3
 	default "sh3eb"   if BR2_sh3eb
@@ -74,36 +73,21 @@ config BR2_ARCH
 	default "sparc"   if BR2_sparc
 
 
-menu "Build options"
-
 config BR2_WGET
-	string "Wget command"
+	string 
 	default "wget --passive-ftp -nd"
 
 config BR2_TAR_VERBOSITY
-	bool "Tar verbose"
+	bool 
 	default n
 
 config BR2_STAGING_DIR
-	string "Toolchain and header file location?"
+	string
 	default "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)"
-	help
-	    This is the location where the toolchain will be installed.
-	    Since the toolchain will not work if it is moved from this
-	    location, it is important for people wishing to package up
-	    a uClibc toolchain that this be set to the location in which
-	    the toolchain will be used.
-
-	    Most people will leave this set to the default value of
-	    "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)".
 
 config BR2_JLEVEL
-	int "Number of jobs to run simultaneously"
+	int
 	default "1"
-	help
-	    Number of jobs to run simultanesouly
-
-endmenu
 
 source "toolchain/Config.in"
 source "package/Config.in"

Config.in.devel

@@ -0,0 +1,114 @@
+#
+
+mainmenu "OpenWRT Configuration"
+
+config MODULES
+	bool
+	default y
+
+config BR2_HAVE_DOT_CONFIG
+	bool
+	default y
+
+config CONFIG_DEVEL
+	bool
+	default y
+
+choice
+	prompt "Target Architecture" if CONFIG_DEVEL
+	default BR2_mipsel
+	help
+	  Stuff
+
+config BR2_arm
+	bool "arm"
+
+config BR2_armeb
+	bool "armeb"
+
+config BR2_cris
+	bool "cris"
+
+config BR2_i386
+	bool "i386"
+
+config BR2_m68k
+	bool "m68k"
+
+config BR2_mips
+	bool "mips"
+
+config BR2_mipsel
+	bool "mipsel"
+
+config BR2_powerpc
+	bool "powerpc"
+
+config BR2_sh3
+	bool "sh3"
+
+config BR2_sh3eb
+	bool "sh3eb"
+
+config BR2_sh4
+	bool "sh4"
+
+config BR2_sh4eb
+	bool "sh4eb"
+
+config BR2_sparc
+	bool "sparc"
+
+endchoice
+
+config BR2_ARCH
+	string
+	default "arm"     if BR2_arm
+	default "armeb"   if BR2_armeb
+	default "cris"    if BR2_cris
+	default "i386"    if BR2_i386
+	default "m68k"    if BR2_m68k
+	default "mips"    if BR2_mips
+	default "mipsel"  if BR2_mipsel
+	default "powerpc" if BR2_powerpc
+	default "sh3"     if BR2_sh3
+	default "sh3eb"   if BR2_sh3eb
+	default "sh4"     if BR2_sh4
+	default "sh4eb"   if BR2_sh4eb
+	default "sparc"   if BR2_sparc
+
+
+menu "Build options"
+
+config BR2_WGET
+	string "Wget command"
+	default "wget --passive-ftp -nd"
+
+config BR2_TAR_VERBOSITY
+	bool "Tar verbose"
+	default n
+
+config BR2_STAGING_DIR
+	string "Toolchain and header file location?"
+	default "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)"
+	help
+	    This is the location where the toolchain will be installed.
+	    Since the toolchain will not work if it is moved from this
+	    location, it is important for people wishing to package up
+	    a uClibc toolchain that this be set to the location in which
+	    the toolchain will be used.
+
+	    Most people will leave this set to the default value of
+	    "$(BASE_DIR)/staging_dir_$(ARCH)$(ARCH_FPU_SUFFIX)".
+
+config BR2_JLEVEL
+	int "Number of jobs to run simultaneously"
+	default "1"
+	help
+	    Number of jobs to run simultanesouly
+
+endmenu
+
+source "toolchain/Config.in.devel"
+source "package/Config.in"
+source "target/Config.in"

Makefile

@@ -24,7 +24,11 @@
 #--------------------------------------------------------------
 TOPDIR=${shell pwd}
 export TOPDIR
+ifneq ($(DEVELOPER),)
+CONFIG_CONFIG_IN = Config.in.devel
+else
 CONFIG_CONFIG_IN = Config.in
+endif
 CONFIG_DEFCONFIG = .defconfig
 CONFIG = package/config
 

package/busybox/Config.in

@@ -12,6 +12,7 @@ config BR2_PACKAGE_BUSYBOX
 config BR2_PACKAGE_BUSYBOX_SNAPSHOT
 	bool "Use the daily snapshot of busybox?"
 	depends BR2_PACKAGE_BUSYBOX
+	depends CONFIG_DEVEL
 	default n
 	help
 	  Use the latest busybox CVS snapshot instead of release.

toolchain/Config.in

@@ -1,56 +1,29 @@
 #
 
-menu "Toolchain Options"
-
-
 source "toolchain/uClibc/Config.in"
 source "toolchain/binutils/Config.in"
 source "toolchain/gcc/Config.in"
 source "toolchain/ccache/Config.in"
 
-
+if CONFIG_DEVEL
-comment "Common Toolchain Options"
+	comment "Common Toolchain Options"
+endif
 
 config BR2_ENABLE_MULTILIB
-	bool "Enable multilib support?"
+	bool
 	default n
-	help
-	    If you want multilib enabled, enable this...
 
 config BR2_LARGEFILE
-	bool "Enable large file (files > 2 GB) support?"
+	bool
 	depends on !BR2_cris
 	default y
-	help
-	    Enable large file (files > 2 GB) support
 
 config BR2_SOFT_FLOAT
-	bool "Use software floating point by default"
+	bool
 	default n
 	depends on BR2_arm || BR2_mips || BR2_powerpc
-	help
-	  If your target CPU does not have a Floating Point Unit (FPU) or a
-	  kernel FPU emulator, but you still wish to support floating point
-	  functions, then everything will need to be compiled with soft floating
-	  point support (-msoft-float).
-
-	  Most people will answer N.
 
 config BR2_TARGET_OPTIMIZATION
-	string "Target Optimizations"
+	string
 	default "-Os -pipe -mips32 -mtune=mips32"
-	help
-	  Optimizations to use when building for the target host.
-
-# Might be worth experimenting with for gcc 3.4.x.
-#GCC_WITH_CPU:=
-#GCC_WITH_ARCH:=
-#GCC_WITH_TUNE:=
-
-#GCC_WITH_CPU:=--with-cpu=
-#GCC_WITH_ARCH:=--with-arch=
-#GCC_WITH_TUNE:=--with-tune=
-
-
-endmenu
 

toolchain/Config.in.devel

@@ -0,0 +1,55 @@
+#
+
+menu "Toolchain Options"
+
+source "toolchain/uClibc/Config.in"
+source "toolchain/binutils/Config.in"
+source "toolchain/gcc/Config.in"
+source "toolchain/ccache/Config.in"
+
+
+comment "Common Toolchain Options"
+
+config BR2_ENABLE_MULTILIB
+	bool "Enable multilib support?"
+	default n
+	help
+	    If you want multilib enabled, enable this...
+
+config BR2_LARGEFILE
+	bool "Enable large file (files > 2 GB) support?"
+	depends on !BR2_cris
+	default y
+	help
+	    Enable large file (files > 2 GB) support
+
+config BR2_SOFT_FLOAT
+	bool "Use software floating point by default"
+	default n
+	depends on BR2_arm || BR2_mips || BR2_powerpc
+	help
+	  If your target CPU does not have a Floating Point Unit (FPU) or a
+	  kernel FPU emulator, but you still wish to support floating point
+	  functions, then everything will need to be compiled with soft floating
+	  point support (-msoft-float).
+
+	  Most people will answer N.
+
+config BR2_TARGET_OPTIMIZATION
+	string "Target Optimizations"
+	default "-Os -pipe -mips32 -mtune=mips32"
+	help
+	  Optimizations to use when building for the target host.
+
+# Might be worth experimenting with for gcc 3.4.x.
+#GCC_WITH_CPU:=
+#GCC_WITH_ARCH:=
+#GCC_WITH_TUNE:=
+
+#GCC_WITH_CPU:=--with-cpu=
+#GCC_WITH_ARCH:=--with-arch=
+#GCC_WITH_TUNE:=--with-tune=
+
+
+endmenu
+

toolchain/binutils/Config.in

@@ -1,9 +1,11 @@
 # Choose binutils version.
 
-comment "Binutils Options"
+if CONFIG_DEVEL
+	comment "Binutils Options"
+endif
 
 choice
-	prompt "Binutils Version"
+	prompt "Binutils Version" if CONFIG_DEVEL
 	default BR2_BINUTILS_VERSION_2_14_90_0_8
 	help
 	  Select the version of binutils you wish to use.
@@ -56,7 +58,7 @@ config BR2_BINUTILS_VERSION
 	string
 	default "2.14.90.0.6"     if BR2_BINUTILS_VERSION_2_14_90_0_6
 	default "2.14.90.0.7"     if BR2_BINUTILS_VERSION_2_14_90_0_7
-	default "2.14.90.0.8"     if BR2_BINUTILS_VERSION_2_14_90_0_8
+	default "2.14.90.0.8"     if BR2_BINUTILS_VERSION_2_14_90_0_8 || !CONFIG_DEVEL
 	default "2.15"            if BR2_BINUTILS_VERSION_2_15
 	default "2.15.90.0.1"     if BR2_BINUTILS_VERSION_2_15_90_0_1
 	default "2.15.90.0.0.1.1" if BR2_BINUTILS_VERSION_2_15_90_0_1_1

toolchain/ccache/Config.in

@@ -1,9 +1,10 @@
 #
-
+if CONFIG_DEVEL
-comment "Ccache Options"
+	comment "Ccache Options"
+endif
 
 config BR2_CCACHE
-	bool "Enable ccache support?"
+	bool "Enable ccache support?" if CONFIG_DEVEL
 	default y
 	help
 	    Enable ccache support?

toolchain/gcc/Config.in

@@ -2,10 +2,12 @@
 # WARNING -- 2.95 currently only builds for i386, arm, mips*, and powerpc.
 # WARNING -- 2.95 does not currently build natively for the target.
 
-comment "Gcc Options"
+if CONFIG_DEVEL
+	comment "Gcc Options"
+endif
 
 choice
-	prompt "GCC compiler Version"
+	prompt "GCC compiler Version" if CONFIG_DEVEL
 	default BR2_GCC_VERSION_3_3_5
 	help
 	  Select the version of gcc you wish to use.
@@ -35,10 +37,9 @@ endchoice
 
 config BR2_GCC_VERSION
 	string
-	default "2.95"      if BR2_GCC_VERSION_2_95
 	default "3.3.3"     if BR2_GCC_VERSION_3_3_3
 	default "3.3.4"     if BR2_GCC_VERSION_3_3_4
-	default "3.3.5"     if BR2_GCC_VERSION_3_3_5
+	default "3.3.5"     if BR2_GCC_VERSION_3_3_5 || !CONFIG_DEVEL
 	default "3.4.0"     if BR2_GCC_VERSION_3_4_0
 	default "3.4.1"     if BR2_GCC_VERSION_3_4_1
 	default "3.4.2"     if BR2_GCC_VERSION_3_4_2
@@ -53,13 +54,15 @@ config BR2_GCC_USE_SJLJ_EXCEPTIONS
 	    but not dynamic.  So use setjmp/longjmp exceptions by default.
 
 config BR2_EXTRA_GCC_CONFIG_OPTIONS
-	string "Additional gcc options"
+	string
+	prompt "Additional gcc options" if CONFIG_DEVEL
 	default ""
 	help
 	    Any additional gcc options you may want to include....
 
 config BR2_INSTALL_LIBSTDCPP
-	bool "Build/install c++ compiler and libstdc++?"
+	bool
+	prompt "Build/install c++ compiler and libstdc++?" if CONFIG_DEVEL
 	default n
 	help
 	    Build/install c++ compiler and libstdc++?

toolchain/uClibc/Config.in

@@ -1,10 +1,12 @@
 # Choose uClibc options
 #
-
+if CONFIG_DEVEL
-comment "uClibc Options"
+	comment "uClibc Options"
+endif
 
 config BR2_UCLIBC_VERSION_SNAPSHOT
-	bool "Use the daily snapshot of uClibc?"
+	bool
+	prompt "Use the daily snapshot of uClibc?" if CONFIG_DEVEL
 	default n
 	help
 	    Would you like to use the latest daily snapshot?
@@ -15,7 +17,8 @@ config BR2_USE_UCLIBC_SNAPSHOT
 	depends on BR2_UCLIBC_VERSION_SNAPSHOT
 
 config BR2_ENABLE_LOCALE
-	bool "Enable locale/gettext/i18n support?"
+	bool
+	prompt "Enable locale/gettext/i18n support?" if CONFIG_DEVEL
 	default n
 	help
 	    Enable locale/gettext/i18n support?