[ifxmips] refresh 2.6.33 patches, add more mach support, add crypto support, tbd. mach/board detection

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@21159 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/ifxmips/files-2.6.33/arch/mips/ifxmips/Kconfig

@@ -10,6 +10,18 @@ choice
 		bool "Danube/Twinpass"
 		select SOC_DANUBE
 
+	config IFXMIPS_ASE
+		bool "Amazon-SE"
+		select SOC_ASE
+
+	config IFXMIPS_AR9
+		bool "AR9"
+		select SOC_AR9
+
+	config IFXMIPS_VR9
+		bool "VR9"
+		select SOC_VR9
+
 endchoice
 
 source "arch/mips/ifxmips/danube/Kconfig"
@@ -32,6 +44,60 @@ config SOC_DANUBE
 	select SWAP_IO_SPACE
 	select MIPS_MACHINE
 
+config SOC_ASE
+	bool
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select HAVE_STD_PC_SERIAL_PORT
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_HAS_EARLY_PRINTK
+	select HW_HAS_PCI
+	select ARCH_REQUIRE_GPIOLIB
+	select SWAP_IO_SPACE
+	select MIPS_MACHINE
+
+config SOC_AR9
+	bool
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select HAVE_STD_PC_SERIAL_PORT
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_HAS_EARLY_PRINTK
+	select HW_HAS_PCI
+	select ARCH_REQUIRE_GPIOLIB
+	select SWAP_IO_SPACE
+	select MIPS_MACHINE
+
+config SOC_VR9
+	bool
+	select DMA_NONCOHERENT
+	select IRQ_CPU
+	select CEVT_R4K
+	select CSRC_R4K
+	select SYS_HAS_CPU_MIPS32_R1
+	select SYS_HAS_CPU_MIPS32_R2
+	select HAVE_STD_PC_SERIAL_PORT
+	select SYS_SUPPORTS_BIG_ENDIAN
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_MULTITHREADING
+	select SYS_HAS_EARLY_PRINTK
+	select HW_HAS_PCI
+	select ARCH_REQUIRE_GPIOLIB
+	select SWAP_IO_SPACE
+	select MIPS_MACHINE
+
 if EARLY_PRINTK
 menu "Infineon SoC settings"
 

target/linux/ifxmips/files-2.6.33/arch/mips/ifxmips/common/prom.c

@@ -4,6 +4,7 @@
 #include <linux/etherdevice.h>
 
 #include <asm/bootinfo.h>
+#include <machine.h>
 
 #include <ifxmips.h>
 #include <ifxmips_prom.h>
@@ -65,8 +66,12 @@ out:
 }
 __setup("ethaddr", ifxmips_set_ethaddr);
 
-void __init
-prom_init(void)
+static void __init prom_detect_machtype(void)
+{
+	mips_machtype = IFXMIPS_MACH_EASY50712;
+}
+
+static void __init prom_init_cmdline(void)
 {
 	int argc = fw_arg0;
 	char **argv = (char **) fw_arg1;
@@ -129,3 +134,10 @@ prom_init(void)
 
 	add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
 }
+
+void __init
+prom_init(void)
+{
+	prom_detect_machtype();
+	prom_init_cmdline();
+}

target/linux/ifxmips/files-2.6.33/arch/mips/ifxmips/danube/Makefile

@@ -1,3 +1,5 @@
 obj-y := dma-core.o irq.o ebu.o setup.o devices.o cgu.o
 obj-$(CONFIG_IFXMIPS_ARCAYDIAN_BRNBOOT) += arcaydian.o
 obj-$(CONFIG_DANUBE_MACH_ARV452) += mach-arv452.o
+obj-$(CONFIG_DANUBE_MACH_EASY50712) += mach-easy50712.o
+obj-$(CONFIG_DANUBE_MACH_EASY4010) += mach-easy4010.o

target/linux/ifxmips/files-2.6.33/arch/mips/ifxmips/danube/devices.c

@@ -75,7 +75,7 @@ static struct resource danube_ethernet_resources =
 
 static struct platform_device danube_ethernet =
 {
-	.name			= "danube_ethernet",
+	.name			= "ifxmips_mii0",
 	.resource		= &danube_ethernet_resources,
 	.num_resources	= 1,
 	.dev = {

target/linux/ifxmips/files-2.6.33/arch/mips/ifxmips/danube/mach-arv452.c

@@ -167,4 +167,4 @@ arv452_init(void)
 MIPS_MACHINE(IFXMIPS_MACH_ARV452,
 			"ARV452",
 			"Airties WAV-281, Arcor A800",
-		     arv452_init);
+			arv452_init);

target/linux/ifxmips/files-2.6.33/arch/mips/ifxmips/danube/mach-easy4010.c

@@ -0,0 +1,79 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+
+#include <machine.h>
+#include <ifxmips_prom.h>
+
+#include "devices.h"
+
+extern unsigned char ifxmips_ethaddr[6];
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition easy4010_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x40000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "kernel",
+		.offset	= 0x0,
+		.size	= 0x0,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= 0x0,
+		.size	= 0x0,
+	}
+};
+#endif
+
+static struct physmap_flash_data easy4010_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(easy4010_partitions),
+	.parts		= easy4010_partitions,
+#endif
+};
+
+static struct gpio_led easy4010_leds[] = {
+	{ .name = "ifx:green:test0", .gpio = 0,},
+	{ .name = "ifx:green:test1", .gpio = 1,},
+	{ .name = "ifx:green:test2", .gpio = 2,},
+	{ .name = "ifx:green:test3", .gpio = 3,},
+};
+
+static void __init
+easy4010_init(void)
+{
+	ifxmips_register_gpio();
+
+	ifxmips_register_gpio_dev();
+
+	ifxmips_register_mtd(&easy4010_flash_data);
+
+	ifxmips_register_leds(easy4010_leds, ARRAY_SIZE(easy4010_leds));
+
+	ifxmips_register_wdt();
+
+	danube_register_ethernet(ifxmips_ethaddr);
+
+	danube_register_usb();
+}
+
+MIPS_MACHINE(IFXMIPS_MACH_EASY4010,
+			"EASY4010",
+			"Lantiq Twinpass Eval Board",
+			easy4010_init);

target/linux/ifxmips/files-2.6.33/arch/mips/ifxmips/danube/mach-easy50712.c

@@ -0,0 +1,80 @@
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/gpio_buttons.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/input.h>
+
+#include <machine.h>
+#include <ifxmips_prom.h>
+
+#include "devices.h"
+
+extern unsigned char ifxmips_ethaddr[6];
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition easy50712_partitions[] =
+{
+	{
+		.name	= "uboot",
+		.offset	= 0x0,
+		.size	= 0x40000,
+	},
+	{
+		.name	= "uboot_env",
+		.offset	= 0x40000,
+		.size	= 0x10000,
+	},
+	{
+		.name	= "kernel",
+		.offset	= 0x0,
+		.size	= 0x0,
+	},
+	{
+		.name	= "rootfs",
+		.offset	= 0x0,
+		.size	= 0x0,
+	}
+};
+#endif
+
+static struct physmap_flash_data easy50712_flash_data = {
+#ifdef CONFIG_MTD_PARTITIONS
+	.nr_parts	= ARRAY_SIZE(easy50712_partitions),
+	.parts		= easy50712_partitions,
+#endif
+};
+
+static struct gpio_led easy50712_leds[] = {
+	{ .name = "ifx:green:test0", .gpio = 0,},
+	{ .name = "ifx:green:test1", .gpio = 1,},
+	{ .name = "ifx:green:test2", .gpio = 2,},
+	{ .name = "ifx:green:test3", .gpio = 3,},
+};
+
+static void __init
+easy50712_init(void)
+{
+	ifxmips_register_gpio();
+
+	//printk("ifxmips_register_gpio_dev\n");
+	//ifxmips_register_gpio_dev();
+
+	ifxmips_register_mtd(&easy50712_flash_data);
+
+	ifxmips_register_leds(easy50712_leds, ARRAY_SIZE(easy50712_leds));
+
+	ifxmips_register_wdt();
+
+	danube_register_ethernet(ifxmips_ethaddr);
+
+	danube_register_usb();
+}
+
+MIPS_MACHINE(IFXMIPS_MACH_EASY50712,
+			"EASY50712",
+			"Lantiq Eval Board",
+			easy50712_init);

target/linux/ifxmips/files-2.6.33/arch/mips/include/asm/mach-ifxmips/machine.h

@@ -1,11 +1,21 @@
 #include <asm/mips_machine.h>
 
-enum ramips_mach_type {
+enum ifxmips_mach_type {
 	IFXMIPS_MACH_GENERIC,
 
-	/* Danube based machines */
-	IFXMIPS_MACH_EASY50712,		/* danube evalkit */
+	/* Danube/Twinpass based machines */
+	IFXMIPS_MACH_EASY50712,		/* Danube evalkit */
+	IFXMIPS_MACH_EASY4010,		/* Twinpass evalkit */
 	IFXMIPS_MACH_ARV4519,		/* Airties WAV-221 */
 	IFXMIPS_MACH_ARV452,		/* Airties WAV-281, Arcor EasyboxA800 */
+
+	/* ASE based machines */
+	IFXMIPS_MACH_EASY50601,		/* ASE wave board */
+
+	/* AR9 based machines */
+	IFXMIPS_MACH_EASY50822,		/* AR9 eval board */
+
+	/* VR9 based machines */
+	IFXMIPS_MACH_EASY80920,		/* VRX200 eval board */
 };