mirror of
git://projects.qi-hardware.com/openwrt-xburst.git
synced 2024-11-24 05:12:29 +02:00
Some adm5120-hcd cleanups
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@8320 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
florian
parent
42b664a30a
commit
43aa5af0f0
@ -34,47 +34,45 @@ MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
|
||||
#define PFX "adm5120-hcd: "
|
||||
|
||||
#define ADMHCD_REG_CONTROL 0x00
|
||||
#define ADMHCD_REG_INTSTATUS 0x04
|
||||
#define ADMHCD_REG_INTENABLE 0x08
|
||||
#define ADMHCD_REG_HOSTCONTROL 0x10
|
||||
#define ADMHCD_REG_FMINTERVAL 0x18
|
||||
#define ADMHCD_REG_FMNUMBER 0x1c
|
||||
#define ADMHCD_REG_LSTHRESH 0x70
|
||||
#define ADMHCD_REG_RHDESCR 0x74
|
||||
#define ADMHCD_REG_PORTSTATUS0 0x78
|
||||
#define ADMHCD_REG_PORTSTATUS1 0x7c
|
||||
#define ADMHCD_REG_HOSTHEAD 0x80
|
||||
|
||||
|
||||
#define ADMHCD_NUMPORTS 2
|
||||
|
||||
#define ADMHCD_HOST_EN 0x00000001 /* Host enable */
|
||||
#define ADMHCD_SW_INTREQ 0x00000002 /* request software int */
|
||||
#define ADMHCD_SW_RESET 0x00000008 /* Reset */
|
||||
|
||||
#define ADMHCD_INT_TD 0x00100000 /* TD completed */
|
||||
#define ADMHCD_INT_SW 0x20000000 /* software interrupt */
|
||||
#define ADMHCD_INT_FATAL 0x40000000 /* Fatal interrupt */
|
||||
#define ADMHCD_DMAA 0x00000004 /* DMA arbitration control */
|
||||
#define ADMHCD_SW_INTREQ 0x00000002 /* request software int */
|
||||
#define ADMHCD_HOST_EN 0x00000001 /* Host enable */
|
||||
#define ADMHCD_REG_INTSTATUS 0x04
|
||||
#define ADMHCD_INT_ACT 0x80000000 /* Interrupt active */
|
||||
|
||||
#define ADMHCD_INT_FATAL 0x40000000 /* Fatal interrupt */
|
||||
#define ADMHCD_INT_SW 0x20000000 /* software interrupt */
|
||||
#define ADMHCD_INT_TD 0x00100000 /* TD completed */
|
||||
#define ADMHCD_FNO 0x00000800 /* Frame number overaflow */
|
||||
#define ADMHCD_SO 0x00000400 /* Scheduling overrun */
|
||||
#define ADMHCD_INSMI 0x00000200 /* Root hub status change */
|
||||
#define ADMHCD_BABI 0x00000100 /* Babble detected, host mode */
|
||||
#define ADMHCD_RESI 0x00000020 /* Resume detected */
|
||||
#define ADMHCD_SOFI 0x00000010 /* SOF transmitted/received, host mode */
|
||||
#define ADMHCD_REG_INTENABLE 0x08
|
||||
#define ADMHCD_INT_EN 0x80000000 /* Interrupt enable */
|
||||
#define ADMHCD_INTMASK 0x00000001 /* Interrupt mask */
|
||||
#define ADMHCD_REG_HOSTCONTROL 0x10
|
||||
#define ADMHCD_DMA_EN 0x00000004 /* USB host DMA enable */
|
||||
#define ADMHCD_STATE_RST 0x00000000 /* bus state reset */
|
||||
#define ADMHCD_STATE_RES 0x00000001 /* bus state resume */
|
||||
#define ADMHCD_STATE_OP 0x00000002 /* bus state operational */
|
||||
#define ADMHCD_STATE_SUS 0x00000003 /* bus state suspended */
|
||||
#define ADMHCD_DMA_EN 0x00000004 /* enable dma engine */
|
||||
|
||||
#define ADMHCD_RST_ST 0x00 /* USB reset state */
|
||||
#define ADMHCD_RSM_ST 0x01 /* USB resume state */
|
||||
#define ADMHCD_OPR_ST 0x10 /* USB operational state */
|
||||
#define ADMHCD_SUS_ST 0x11 /* USB suspend state */
|
||||
|
||||
#define ADMHCD_REG_FMINTERVAL 0x18
|
||||
#define ADMHCD_REG_FMNUMBER 0x1c
|
||||
#define ADMHCD_REG_LSTHRESH 0x70
|
||||
#define ADMHCD_REG_RHDESCR 0x74
|
||||
#define ADMHCD_CRWE 0x20000000 /* Clear wakeup enable */
|
||||
#define ADMHCD_DRWE 0x10000000 /* Device remote wakeup enable */
|
||||
#define ADMHCD_HW_OCIC 0x08000000 /* Over current indication change */
|
||||
#define ADMHCD_LPSC 0x04000000 /* Local power switch change */
|
||||
#define ADMHCD_OCI 0x02000000 /* Over current indication */
|
||||
#define ADMHCD_LPS 0x01000000 /* Local power switch/global power switch */
|
||||
#define ADMHCD_NOCP 0x00000800 /* No over current protect mode */
|
||||
#define ADMHCD_OPCM 0x00000400 /* Over current protect mode */
|
||||
#define ADMHCD_NPS 0x00000200 /* No Power Switch */
|
||||
#define ADMHCD_PSM 0x00000100 /* Power switch mode */
|
||||
#define ADMHCD_OPCM 0x00000400 /* Over current protect mode */
|
||||
#define ADMHCD_NOCP 0x00000800 /* No over current protect mode */
|
||||
#define ADMHCD_LPSC 0x04000000 /* Local power switch change */
|
||||
#define ADMHCD_LPS 0x01000000 /* Local power switch/global power switch */
|
||||
|
||||
#define ADMHCD_REG_PORTSTATUS0 0x78
|
||||
#define ADMHCD_CCS 0x00000001 /* current connect status */
|
||||
#define ADMHCD_PES 0x00000002 /* port enable status */
|
||||
#define ADMHCD_PSS 0x00000004 /* port suspend status */
|
||||
@ -87,8 +85,12 @@ MODULE_AUTHOR("Jeroen Vreeken (pe1rxq@amsat.org)");
|
||||
#define ADMHCD_PSSC 0x00040000 /* suspend status change */
|
||||
#define ADMHCD_OCIC 0x00080000 /* overcurrent change*/
|
||||
#define ADMHCD_PRSC 0x00100000 /* reset status change */
|
||||
#define ADMHCD_REG_PORTSTATUS1 0x7c
|
||||
#define ADMHCD_REG_HOSTHEAD 0x80
|
||||
|
||||
|
||||
#define ADMHCD_NUMPORTS 2
|
||||
|
||||
struct admhcd_ed {
|
||||
/* Don't change first four, they used for DMA */
|
||||
u32 control;
|
||||
@ -700,6 +702,8 @@ static int admhcd_start(struct usb_hcd *hcd)
|
||||
struct admhcd *ahcd = hcd_to_admhcd(hcd);
|
||||
unsigned long flags;
|
||||
|
||||
printk(KERN_DEBUG PFX "calling admhcd_start\n");
|
||||
|
||||
spin_lock_irqsave(&ahcd->lock, flags);
|
||||
|
||||
/* Initialise the HCD registers */
|
||||
@ -708,8 +712,12 @@ static int admhcd_start(struct usb_hcd *hcd)
|
||||
|
||||
admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_SW_RESET);
|
||||
|
||||
while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET)
|
||||
while (admhcd_reg_get(ahcd, ADMHCD_REG_CONTROL) & ADMHCD_SW_RESET) {
|
||||
printk(KERN_WARNING PFX "waiting for reset to complete\n");
|
||||
mdelay(1);
|
||||
}
|
||||
|
||||
hcd->uses_new_polling = 1;
|
||||
|
||||
/* Enable USB host mode */
|
||||
admhcd_reg_set(ahcd, ADMHCD_REG_CONTROL, ADMHCD_HOST_EN);
|
||||
@ -725,13 +733,17 @@ static int admhcd_start(struct usb_hcd *hcd)
|
||||
admhcd_reg_set(ahcd, ADMHCD_REG_INTSTATUS,
|
||||
ADMHCD_INT_ACT | ADMHCD_INT_FATAL | ADMHCD_INT_SW | ADMHCD_INT_TD);
|
||||
|
||||
/* Power on all ports */
|
||||
admhcd_reg_set(ahcd, ADMHCD_REG_RHDESCR, ADMHCD_NPS | ADMHCD_LPSC);
|
||||
admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
|
||||
|
||||
/* HCD is now operationnal */
|
||||
admhcd_reg_set(ahcd, ADMHCD_REG_HOSTCONTROL, ADMHCD_STATE_OP);
|
||||
|
||||
hcd->state = HC_STATE_RUNNING;
|
||||
|
||||
spin_unlock_irqrestore(&ahcd->lock, flags);
|
||||
|
||||
printk(KERN_DEBUG PFX "returning 0 from admhcd_start\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
@ -776,7 +788,7 @@ static int admhcd_reset(struct usb_hcd *hcd)
|
||||
while (time_before_eq(jiffies, t)) {
|
||||
msleep(4);
|
||||
spin_lock_irq(&ahcd->lock);
|
||||
val = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) & ADMHCD_OPR_ST;
|
||||
val = admhcd_reg_get(ahcd, ADMHCD_REG_HOSTCONTROL) & ADMHCD_STATE_RST;
|
||||
spin_unlock_irq(&ahcd->lock);
|
||||
if (val)
|
||||
break;
|
||||
@ -814,7 +826,7 @@ static struct hc_driver adm5120_hc_driver = {
|
||||
.product_desc = "ADM5120 HCD",
|
||||
.hcd_priv_size = sizeof(struct admhcd),
|
||||
.irq = adm5120hcd_irq,
|
||||
.flags = HCD_MEMORY|HCD_USB11,
|
||||
.flags = HCD_USB11,
|
||||
.urb_enqueue = admhcd_urb_enqueue,
|
||||
.urb_dequeue = admhcd_urb_dequeue,
|
||||
.endpoint_disable = admhcd_endpoint_disable,
|
||||
@ -838,54 +850,64 @@ static int __init adm5120hcd_probe(struct platform_device *pdev)
|
||||
int err = 0, irq;
|
||||
|
||||
if (pdev->num_resources < 2) {
|
||||
printk(KERN_WARNING PFX "not enough resources\n");
|
||||
err = -ENODEV;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (pdev->dev.dma_mask) {
|
||||
printk(KERN_DEBUG "no we won't dma\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
irq = platform_get_irq(pdev, 0);
|
||||
data = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
|
||||
if (pdev->dev.dma_mask) {
|
||||
printk(KERN_DEBUG PFX "no we won't dma\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (!data || irq < 0) {
|
||||
printk(KERN_DEBUG PFX "either IRQ or data resource is invalid\n");
|
||||
err = -ENODEV;
|
||||
goto out;
|
||||
}
|
||||
|
||||
if (!request_mem_region(data->start, 2, hcd_name)) {
|
||||
printk(KERN_DEBUG PFX "cannot request memory regions for the data resource\n");
|
||||
err = -EBUSY;
|
||||
goto out_unmap;
|
||||
goto out;
|
||||
}
|
||||
|
||||
data_reg = ioremap(data->start, resource_len(data));
|
||||
|
||||
if (data_reg == NULL) {
|
||||
printk(KERN_DEBUG PFX "unable to ioremap\n");
|
||||
err = -ENOMEM;
|
||||
goto out_mem;
|
||||
}
|
||||
|
||||
hcd = usb_create_hcd(&adm5120_hc_driver, &pdev->dev, pdev->dev.bus_id);
|
||||
if (!hcd)
|
||||
if (!hcd) {
|
||||
printk(KERN_DEBUG PFX "unable to create the hcd\n");
|
||||
err = -ENOMEM;
|
||||
goto out_mem;
|
||||
}
|
||||
|
||||
hcd->rsrc_start = data->start;
|
||||
hcd->rsrc_len = resource_len(data);
|
||||
hcd->regs = (u32)data_reg;
|
||||
hcd->regs = data_reg;
|
||||
|
||||
ahcd = hcd_to_admhcd(hcd);
|
||||
ahcd->data_reg = data_reg;
|
||||
ahcd->base = (u32)data_reg;
|
||||
|
||||
spin_lock_init(&ahcd->lock);
|
||||
INIT_LIST_HEAD(&ahcd->async);
|
||||
|
||||
ahcd->data_reg = data_reg;
|
||||
ahcd->base = (u32)data_reg;
|
||||
|
||||
hcd->product_desc = "ADM5120 HCD";
|
||||
|
||||
err = usb_add_hcd(hcd, irq, IRQF_DISABLED);
|
||||
if (err)
|
||||
if (err) {
|
||||
printk(KERN_DEBUG PFX "unable to add hcd\n");
|
||||
goto out_dev;
|
||||
}
|
||||
|
||||
return 0;
|
||||
|
||||
@ -899,6 +921,25 @@ out:
|
||||
return err;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
static int adm5120hcd_suspend(struct platform_device *pdev, pm_message_t state)
|
||||
{
|
||||
pdev-dev.power.power_state = state;
|
||||
mdelay(1);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int adm5120hcd_resume(struct platform_device *pdev, pm_message_t state)
|
||||
{
|
||||
pdev->dev.power.power_state = PMSG_ON;
|
||||
mdelay(1);
|
||||
return 0;
|
||||
}
|
||||
#else
|
||||
#define adm5120hcd_suspend NULL
|
||||
#define adm5120hcd_resume NULL
|
||||
#endif
|
||||
|
||||
static int __init_or_module adm5120hcd_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
||||
@ -916,8 +957,10 @@ static int __init_or_module adm5120hcd_remove(struct platform_device *pdev)
|
||||
static struct platform_driver adm5120hcd_driver = {
|
||||
.probe = adm5120hcd_probe,
|
||||
.remove = adm5120hcd_remove,
|
||||
.suspend = adm5120hcd_suspend,
|
||||
.remove = adm5120hcd_resume,
|
||||
.driver = {
|
||||
.name = "adm5120-usbc",
|
||||
.name = (char *)hcd_name,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
@ -946,6 +989,7 @@ static int __init adm5120hcd_init(void)
|
||||
static void __exit adm5120hcd_exit(void)
|
||||
{
|
||||
platform_driver_unregister(&adm5120hcd_driver);
|
||||
printk(KERN_INFO PFX "driver unregistered\n");
|
||||
}
|
||||
|
||||
module_init(adm5120hcd_init);
|
||||
|
||||
Loading…
Reference in New Issue
Block a user