1
0
mirror of git://projects.qi-hardware.com/openwrt-xburst.git synced 2024-12-25 15:35:30 +02:00

adm5120: merge 2.6.30+ specific patches

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@18999 3c298f89-4303-0410-b956-a3cf2f4a3e73
This commit is contained in:
juhosg 2010-01-02 15:07:31 +00:00
parent c6380a3c3b
commit 462336ec09
14 changed files with 27 additions and 263 deletions

View File

@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <asm/mach-adm5120/adm5120_defs.h>
@ -32,7 +33,9 @@ static struct clk uart_clk = {
struct clk *clk_get(struct device *dev, const char *id)
{
if (!strcmp(id, "UARTCLK"))
char *name = dev_name(dev);
if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
return &uart_clk;
return ERR_PTR(-ENOENT);

View File

@ -190,7 +190,7 @@ struct amba_pl010_data adm5120_uart0_data = {
struct amba_device adm5120_uart0_device = {
.dev = {
.bus_id = "APB:UART0",
.init_name = "apb:uart0",
.platform_data = &adm5120_uart0_data,
},
.res = {
@ -208,7 +208,7 @@ struct amba_pl010_data adm5120_uart1_data = {
struct amba_device adm5120_uart1_device = {
.dev = {
.bus_id = "APB:UART1",
.init_name = "apb:uart1",
.platform_data = &adm5120_uart1_data,
},
.res = {

View File

@ -233,7 +233,7 @@ static int adm5120_flash_initinfo(struct adm5120_flash_info *info,
struct flash_desc *fdesc;
u32 t = 0;
map->name = dev->dev.bus_id;
map->name = dev_name(&dev->dev);
if (dev->id > 1) {
MAP_ERR(map, "invalid flash id\n");

View File

@ -517,7 +517,7 @@ static int adm5120_if_poll(struct napi_struct *napi, int limit)
status = sw_int_status() & SWITCH_INTS_POLL;
if ((done < limit) && (!status)) {
SW_DBG("disable polling mode for %s\n", dev->name);
netif_rx_complete(dev, napi);
napi_complete(napi);
sw_int_unmask(SWITCH_INTS_POLL);
return 0;
}
@ -548,7 +548,7 @@ static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
sw_dump_intr_mask("poll ints", status);
SW_DBG("enable polling mode for %s\n", dev->name);
sw_int_mask(SWITCH_INTS_POLL);
netif_rx_schedule(dev, &priv->napi);
napi_schedule(&priv->napi);
}
#else
sw_int_ack(status);
@ -973,9 +973,12 @@ static void adm5120_if_set_multicast_list(struct net_device *dev)
static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
{
struct sockaddr *addr = p;
int ret;
ret = eth_mac_addr(dev, p);
if (ret)
return ret;
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
adm5120_write_mac(dev);
return 0;
}
@ -1017,6 +1020,18 @@ static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq,
return 0;
}
static const struct net_device_ops adm5120sw_netdev_ops = {
.ndo_open = adm5120_if_open,
.ndo_stop = adm5120_if_stop,
.ndo_start_xmit = adm5120_if_hard_start_xmit,
.ndo_set_multicast_list = adm5120_if_set_multicast_list,
.ndo_do_ioctl = adm5120_if_do_ioctl,
.ndo_tx_timeout = adm5120_if_tx_timeout,
.ndo_validate_addr = eth_validate_addr,
.ndo_change_mtu = eth_change_mtu,
.ndo_set_mac_address = adm5120_if_set_mac_address,
};
static struct net_device *adm5120_if_alloc(void)
{
struct net_device *dev;
@ -1030,14 +1045,8 @@ static struct net_device *adm5120_if_alloc(void)
priv->dev = dev;
dev->irq = ADM5120_IRQ_SWITCH;
dev->open = adm5120_if_open;
dev->hard_start_xmit = adm5120_if_hard_start_xmit;
dev->stop = adm5120_if_stop;
dev->set_multicast_list = adm5120_if_set_multicast_list;
dev->do_ioctl = adm5120_if_do_ioctl;
dev->tx_timeout = adm5120_if_tx_timeout;
dev->netdev_ops = &adm5120sw_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
dev->set_mac_address = adm5120_if_set_mac_address;
#ifdef CONFIG_ADM5120_SWITCH_NAPI
netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);

View File

@ -1,20 +0,0 @@
--- a/arch/mips/adm5120/common/platform.c
+++ b/arch/mips/adm5120/common/platform.c
@@ -190,7 +190,7 @@ struct amba_pl010_data adm5120_uart0_dat
struct amba_device adm5120_uart0_device = {
.dev = {
- .bus_id = "APB:UART0",
+ .init_name = "apb:uart0",
.platform_data = &adm5120_uart0_data,
},
.res = {
@@ -208,7 +208,7 @@ struct amba_pl010_data adm5120_uart1_dat
struct amba_device adm5120_uart1_device = {
.dev = {
- .bus_id = "APB:UART1",
+ .init_name = "apb:uart1",
.platform_data = &adm5120_uart1_data,
},
.res = {

View File

@ -1,11 +0,0 @@
--- a/drivers/mtd/maps/adm5120-flash.c
+++ b/drivers/mtd/maps/adm5120-flash.c
@@ -233,7 +233,7 @@ static int adm5120_flash_initinfo(struct
struct flash_desc *fdesc;
u32 t = 0;
- map->name = dev->dev.bus_id;
+ map->name = dev_name(&dev->dev);
if (dev->id > 1) {
MAP_ERR(map, "invalid flash id\n");

View File

@ -1,20 +0,0 @@
--- a/drivers/net/adm5120sw.c
+++ b/drivers/net/adm5120sw.c
@@ -517,7 +517,7 @@ static int adm5120_if_poll(struct napi_s
status = sw_int_status() & SWITCH_INTS_POLL;
if ((done < limit) && (!status)) {
SW_DBG("disable polling mode for %s\n", dev->name);
- netif_rx_complete(dev, napi);
+ napi_complete(napi);
sw_int_unmask(SWITCH_INTS_POLL);
return 0;
}
@@ -548,7 +548,7 @@ static irqreturn_t adm5120_switch_irq(in
sw_dump_intr_mask("poll ints", status);
SW_DBG("enable polling mode for %s\n", dev->name);
sw_int_mask(SWITCH_INTS_POLL);
- netif_rx_schedule(dev, &priv->napi);
+ napi_schedule(&priv->napi);
}
#else
sw_int_ack(status);

View File

@ -1,21 +0,0 @@
--- a/arch/mips/adm5120/common/clock.c
+++ b/arch/mips/adm5120/common/clock.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/device.h>
#include <asm/mach-adm5120/adm5120_defs.h>
@@ -32,7 +33,9 @@ static struct clk uart_clk = {
struct clk *clk_get(struct device *dev, const char *id)
{
- if (!strcmp(id, "UARTCLK"))
+ char *name = dev_name(dev);
+
+ if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
return &uart_clk;
return ERR_PTR(-ENOENT);

View File

@ -1,52 +0,0 @@
--- a/drivers/net/adm5120sw.c
+++ b/drivers/net/adm5120sw.c
@@ -973,9 +973,12 @@ static void adm5120_if_set_multicast_lis
static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
{
- struct sockaddr *addr = p;
+ int ret;
+
+ ret = eth_mac_addr(dev, p);
+ if (ret)
+ return ret;
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
adm5120_write_mac(dev);
return 0;
}
@@ -1017,6 +1020,18 @@ static int adm5120_if_do_ioctl(struct ne
return 0;
}
+static const struct net_device_ops adm5120sw_netdev_ops = {
+ .ndo_open = adm5120_if_open,
+ .ndo_stop = adm5120_if_stop,
+ .ndo_start_xmit = adm5120_if_hard_start_xmit,
+ .ndo_set_multicast_list = adm5120_if_set_multicast_list,
+ .ndo_do_ioctl = adm5120_if_do_ioctl,
+ .ndo_tx_timeout = adm5120_if_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = adm5120_if_set_mac_address,
+};
+
static struct net_device *adm5120_if_alloc(void)
{
struct net_device *dev;
@@ -1030,14 +1045,8 @@ static struct net_device *adm5120_if_all
priv->dev = dev;
dev->irq = ADM5120_IRQ_SWITCH;
- dev->open = adm5120_if_open;
- dev->hard_start_xmit = adm5120_if_hard_start_xmit;
- dev->stop = adm5120_if_stop;
- dev->set_multicast_list = adm5120_if_set_multicast_list;
- dev->do_ioctl = adm5120_if_do_ioctl;
- dev->tx_timeout = adm5120_if_tx_timeout;
+ dev->netdev_ops = &adm5120sw_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
- dev->set_mac_address = adm5120_if_set_mac_address;
#ifdef CONFIG_ADM5120_SWITCH_NAPI
netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);

View File

@ -1,20 +0,0 @@
--- a/arch/mips/adm5120/common/platform.c
+++ b/arch/mips/adm5120/common/platform.c
@@ -190,7 +190,7 @@ struct amba_pl010_data adm5120_uart0_dat
struct amba_device adm5120_uart0_device = {
.dev = {
- .bus_id = "APB:UART0",
+ .init_name = "apb:uart0",
.platform_data = &adm5120_uart0_data,
},
.res = {
@@ -208,7 +208,7 @@ struct amba_pl010_data adm5120_uart1_dat
struct amba_device adm5120_uart1_device = {
.dev = {
- .bus_id = "APB:UART1",
+ .init_name = "apb:uart1",
.platform_data = &adm5120_uart1_data,
},
.res = {

View File

@ -1,11 +0,0 @@
--- a/drivers/mtd/maps/adm5120-flash.c
+++ b/drivers/mtd/maps/adm5120-flash.c
@@ -233,7 +233,7 @@ static int adm5120_flash_initinfo(struct
struct flash_desc *fdesc;
u32 t = 0;
- map->name = dev->dev.bus_id;
+ map->name = dev_name(&dev->dev);
if (dev->id > 1) {
MAP_ERR(map, "invalid flash id\n");

View File

@ -1,20 +0,0 @@
--- a/drivers/net/adm5120sw.c
+++ b/drivers/net/adm5120sw.c
@@ -517,7 +517,7 @@ static int adm5120_if_poll(struct napi_s
status = sw_int_status() & SWITCH_INTS_POLL;
if ((done < limit) && (!status)) {
SW_DBG("disable polling mode for %s\n", dev->name);
- netif_rx_complete(dev, napi);
+ napi_complete(napi);
sw_int_unmask(SWITCH_INTS_POLL);
return 0;
}
@@ -548,7 +548,7 @@ static irqreturn_t adm5120_switch_irq(in
sw_dump_intr_mask("poll ints", status);
SW_DBG("enable polling mode for %s\n", dev->name);
sw_int_mask(SWITCH_INTS_POLL);
- netif_rx_schedule(dev, &priv->napi);
+ napi_schedule(&priv->napi);
}
#else
sw_int_ack(status);

View File

@ -1,21 +0,0 @@
--- a/arch/mips/adm5120/common/clock.c
+++ b/arch/mips/adm5120/common/clock.c
@@ -19,6 +19,7 @@
#include <linux/module.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/device.h>
#include <asm/mach-adm5120/adm5120_defs.h>
@@ -32,7 +33,9 @@ static struct clk uart_clk = {
struct clk *clk_get(struct device *dev, const char *id)
{
- if (!strcmp(id, "UARTCLK"))
+ char *name = dev_name(dev);
+
+ if (!strcmp(name, "apb:uart0") || !strcmp(name, "apb:uart1"))
return &uart_clk;
return ERR_PTR(-ENOENT);

View File

@ -1,52 +0,0 @@
--- a/drivers/net/adm5120sw.c
+++ b/drivers/net/adm5120sw.c
@@ -973,9 +973,12 @@ static void adm5120_if_set_multicast_lis
static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
{
- struct sockaddr *addr = p;
+ int ret;
+
+ ret = eth_mac_addr(dev, p);
+ if (ret)
+ return ret;
- memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
adm5120_write_mac(dev);
return 0;
}
@@ -1017,6 +1020,18 @@ static int adm5120_if_do_ioctl(struct ne
return 0;
}
+static const struct net_device_ops adm5120sw_netdev_ops = {
+ .ndo_open = adm5120_if_open,
+ .ndo_stop = adm5120_if_stop,
+ .ndo_start_xmit = adm5120_if_hard_start_xmit,
+ .ndo_set_multicast_list = adm5120_if_set_multicast_list,
+ .ndo_do_ioctl = adm5120_if_do_ioctl,
+ .ndo_tx_timeout = adm5120_if_tx_timeout,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = adm5120_if_set_mac_address,
+};
+
static struct net_device *adm5120_if_alloc(void)
{
struct net_device *dev;
@@ -1030,14 +1045,8 @@ static struct net_device *adm5120_if_all
priv->dev = dev;
dev->irq = ADM5120_IRQ_SWITCH;
- dev->open = adm5120_if_open;
- dev->hard_start_xmit = adm5120_if_hard_start_xmit;
- dev->stop = adm5120_if_stop;
- dev->set_multicast_list = adm5120_if_set_multicast_list;
- dev->do_ioctl = adm5120_if_do_ioctl;
- dev->tx_timeout = adm5120_if_tx_timeout;
+ dev->netdev_ops = &adm5120sw_netdev_ops;
dev->watchdog_timeo = TX_TIMEOUT;
- dev->set_mac_address = adm5120_if_set_mac_address;
#ifdef CONFIG_ADM5120_SWITCH_NAPI
netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);